| /* |
| ********************************************************************** |
| * 8010.h |
| * Copyright 1999-2001 Creative Labs, Inc. |
| * |
| ********************************************************************** |
| * |
| * Date Author Summary of changes |
| * ---- ------ ------------------ |
| * October 20, 1999 Bertrand Lee base code release |
| * November 2, 1999 Alan Cox Cleaned of 8bit chars, DOS |
| * line endings |
| * December 8, 1999 Jon Taylor Added lots of new register info |
| * May 16, 2001 Daniel Bertrand Added unofficial DBG register info |
| * Oct-Nov 2001 D.B. Added unofficial Audigy registers |
| * |
| ********************************************************************** |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this program; if not, write to the Free |
| * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, |
| * USA. |
| * |
| * |
| ********************************************************************** |
| */ |
| |
| |
| #ifndef _8010_H |
| #define _8010_H |
| |
| #include <linux/types.h> |
| |
| // Driver version: |
| #define MAJOR_VER 0 |
| #define MINOR_VER 20 |
| #define DRIVER_VERSION "0.20a" |
| |
| |
| // Audigy specify registers are prefixed with 'A_' |
| |
| /************************************************************************************************/ |
| /* PCI function 0 registers, address = <val> + PCIBASE0 */ |
| /************************************************************************************************/ |
| |
| #define PTR 0x00 /* Indexed register set pointer register */ |
| /* NOTE: The CHANNELNUM and ADDRESS words can */ |
| /* be modified independently of each other. */ |
| #define PTR_CHANNELNUM_MASK 0x0000003f /* For each per-channel register, indicates the */ |
| /* channel number of the register to be */ |
| /* accessed. For non per-channel registers the */ |
| /* value should be set to zero. */ |
| #define PTR_ADDRESS_MASK 0x07ff0000 /* Register index */ |
| |
| #define DATA 0x04 /* Indexed register set data register */ |
| |
| #define IPR 0x08 /* Global interrupt pending register */ |
| /* Clear pending interrupts by writing a 1 to */ |
| /* the relevant bits and zero to the other bits */ |
| |
| /* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1) */ |
| #define A_IPR_MIDITRANSBUFEMPTY2 0x10000000 /* MIDI UART transmit buffer empty */ |
| #define A_IPR_MIDIRECVBUFEMPTY2 0x08000000 /* MIDI UART receive buffer empty */ |
| |
| #define IPR_SAMPLERATETRACKER 0x01000000 /* Sample rate tracker lock status change */ |
| #define IPR_FXDSP 0x00800000 /* Enable FX DSP interrupts */ |
| #define IPR_FORCEINT 0x00400000 /* Force Sound Blaster interrupt */ |
| #define IPR_PCIERROR 0x00200000 /* PCI bus error */ |
| #define IPR_VOLINCR 0x00100000 /* Volume increment button pressed */ |
| #define IPR_VOLDECR 0x00080000 /* Volume decrement button pressed */ |
| #define IPR_MUTE 0x00040000 /* Mute button pressed */ |
| #define IPR_MICBUFFULL 0x00020000 /* Microphone buffer full */ |
| #define IPR_MICBUFHALFFULL 0x00010000 /* Microphone buffer half full */ |
| #define IPR_ADCBUFFULL 0x00008000 /* ADC buffer full */ |
| #define IPR_ADCBUFHALFFULL 0x00004000 /* ADC buffer half full */ |
| #define IPR_EFXBUFFULL 0x00002000 /* Effects buffer full */ |
| #define IPR_EFXBUFHALFFULL 0x00001000 /* Effects buffer half full */ |
| #define IPR_GPSPDIFSTATUSCHANGE 0x00000800 /* GPSPDIF channel status change */ |
| #define IPR_CDROMSTATUSCHANGE 0x00000400 /* CD-ROM channel status change */ |
| #define IPR_INTERVALTIMER 0x00000200 /* Interval timer terminal count */ |
| #define IPR_MIDITRANSBUFEMPTY 0x00000100 /* MIDI UART transmit buffer empty */ |
| #define IPR_MIDIRECVBUFEMPTY 0x00000080 /* MIDI UART receive buffer empty */ |
| #define IPR_CHANNELLOOP 0x00000040 /* One or more channel loop interrupts pending */ |
| #define IPR_CHANNELNUMBERMASK 0x0000003f /* When IPR_CHANNELLOOP is set, indicates the */ |
| /* Highest set channel in CLIPL or CLIPH. When */ |
| /* IP is written with CL set, the bit in CLIPL */ |
| /* or CLIPH corresponding to the CIN value */ |
| /* written will be cleared. */ |
| #define A_IPR_MIDITRANSBUFEMPTY1 IPR_MIDITRANSBUFEMPTY /* MIDI UART transmit buffer empty */ |
| #define A_IPR_MIDIRECVBUFEMPTY1 IPR_MIDIRECVBUFEMPTY /* MIDI UART receive buffer empty */ |
| |
| |
| |
| #define INTE 0x0c /* Interrupt enable register */ |
| #define INTE_VIRTUALSB_MASK 0xc0000000 /* Virtual Soundblaster I/O port capture */ |
| #define INTE_VIRTUALSB_220 0x00000000 /* Capture at I/O base address 0x220-0x22f */ |
| #define INTE_VIRTUALSB_240 0x40000000 /* Capture at I/O base address 0x240 */ |
| #define INTE_VIRTUALSB_260 0x80000000 /* Capture at I/O base address 0x260 */ |
| #define INTE_VIRTUALSB_280 0xc0000000 /* Capture at I/O base address 0x280 */ |
| #define INTE_VIRTUALMPU_MASK 0x30000000 /* Virtual MPU I/O port capture */ |
| #define INTE_VIRTUALMPU_300 0x00000000 /* Capture at I/O base address 0x300-0x301 */ |
| #define INTE_VIRTUALMPU_310 0x10000000 /* Capture at I/O base address 0x310 */ |
| #define INTE_VIRTUALMPU_320 0x20000000 /* Capture at I/O base address 0x320 */ |
| #define INTE_VIRTUALMPU_330 0x30000000 /* Capture at I/O base address 0x330 */ |
| #define INTE_MASTERDMAENABLE 0x08000000 /* Master DMA emulation at 0x000-0x00f */ |
| #define INTE_SLAVEDMAENABLE 0x04000000 /* Slave DMA emulation at 0x0c0-0x0df */ |
| #define INTE_MASTERPICENABLE 0x02000000 /* Master PIC emulation at 0x020-0x021 */ |
| #define INTE_SLAVEPICENABLE 0x01000000 /* Slave PIC emulation at 0x0a0-0x0a1 */ |
| #define INTE_VSBENABLE 0x00800000 /* Enable virtual Soundblaster */ |
| #define INTE_ADLIBENABLE 0x00400000 /* Enable AdLib emulation at 0x388-0x38b */ |
| #define INTE_MPUENABLE 0x00200000 /* Enable virtual MPU */ |
| #define INTE_FORCEINT 0x00100000 /* Continuously assert INTAN */ |
| |
| #define INTE_MRHANDENABLE 0x00080000 /* Enable the "Mr. Hand" logic */ |
| /* NOTE: There is no reason to use this under */ |
| /* Linux, and it will cause odd hardware */ |
| /* behavior and possibly random segfaults and */ |
| /* lockups if enabled. */ |
| |
| /* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1) */ |
| #define A_INTE_MIDITXENABLE2 0x00020000 /* Enable MIDI transmit-buffer-empty interrupts */ |
| #define A_INTE_MIDIRXENABLE2 0x00010000 /* Enable MIDI receive-buffer-empty interrupts */ |
| |
| |
| #define INTE_SAMPLERATETRACKER 0x00002000 /* Enable sample rate tracker interrupts */ |
| /* NOTE: This bit must always be enabled */ |
| #define INTE_FXDSPENABLE 0x00001000 /* Enable FX DSP interrupts */ |
| #define INTE_PCIERRORENABLE 0x00000800 /* Enable PCI bus error interrupts */ |
| #define INTE_VOLINCRENABLE 0x00000400 /* Enable volume increment button interrupts */ |
| #define INTE_VOLDECRENABLE 0x00000200 /* Enable volume decrement button interrupts */ |
| #define INTE_MUTEENABLE 0x00000100 /* Enable mute button interrupts */ |
| #define INTE_MICBUFENABLE 0x00000080 /* Enable microphone buffer interrupts */ |
| #define INTE_ADCBUFENABLE 0x00000040 /* Enable ADC buffer interrupts */ |
| #define INTE_EFXBUFENABLE 0x00000020 /* Enable Effects buffer interrupts */ |
| #define INTE_GPSPDIFENABLE 0x00000010 /* Enable GPSPDIF status interrupts */ |
| #define INTE_CDSPDIFENABLE 0x00000008 /* Enable CDSPDIF status interrupts */ |
| #define INTE_INTERVALTIMERENB 0x00000004 /* Enable interval timer interrupts */ |
| #define INTE_MIDITXENABLE 0x00000002 /* Enable MIDI transmit-buffer-empty interrupts */ |
| #define INTE_MIDIRXENABLE 0x00000001 /* Enable MIDI receive-buffer-empty interrupts */ |
| |
| /* The next two interrupts are for the midi port on the Audigy (A_MPU2) */ |
| #define A_INTE_MIDITXENABLE1 INTE_MIDITXENABLE |
| #define A_INTE_MIDIRXENABLE1 INTE_MIDIRXENABLE |
| |
| #define WC 0x10 /* Wall Clock register */ |
| #define WC_SAMPLECOUNTER_MASK 0x03FFFFC0 /* Sample periods elapsed since reset */ |
| #define WC_SAMPLECOUNTER 0x14060010 |
| #define WC_CURRENTCHANNEL 0x0000003F /* Channel [0..63] currently being serviced */ |
| /* NOTE: Each channel takes 1/64th of a sample */ |
| /* period to be serviced. */ |
| |
| #define HCFG 0x14 /* Hardware config register */ |
| /* NOTE: There is no reason to use the legacy */ |
| /* SoundBlaster emulation stuff described below */ |
| /* under Linux, and all kinds of weird hardware */ |
| /* behavior can result if you try. Don't. */ |
| #define HCFG_LEGACYFUNC_MASK 0xe0000000 /* Legacy function number */ |
| #define HCFG_LEGACYFUNC_MPU 0x00000000 /* Legacy MPU */ |
| #define HCFG_LEGACYFUNC_SB 0x40000000 /* Legacy SB */ |
| #define HCFG_LEGACYFUNC_AD 0x60000000 /* Legacy AD */ |
| #define HCFG_LEGACYFUNC_MPIC 0x80000000 /* Legacy MPIC */ |
| #define HCFG_LEGACYFUNC_MDMA 0xa0000000 /* Legacy MDMA */ |
| #define HCFG_LEGACYFUNC_SPCI 0xc0000000 /* Legacy SPCI */ |
| #define HCFG_LEGACYFUNC_SDMA 0xe0000000 /* Legacy SDMA */ |
| #define HCFG_IOCAPTUREADDR 0x1f000000 /* The 4 LSBs of the captured I/O address. */ |
| #define HCFG_LEGACYWRITE 0x00800000 /* 1 = write, 0 = read */ |
| #define HCFG_LEGACYWORD 0x00400000 /* 1 = word, 0 = byte */ |
| #define HCFG_LEGACYINT 0x00200000 /* 1 = legacy event captured. Write 1 to clear. */ |
| /* NOTE: The rest of the bits in this register */ |
| /* _are_ relevant under Linux. */ |
| #define HCFG_CODECFORMAT_MASK 0x00070000 /* CODEC format */ |
| #define HCFG_CODECFORMAT_AC97 0x00000000 /* AC97 CODEC format -- Primary Output */ |
| #define HCFG_CODECFORMAT_I2S 0x00010000 /* I2S CODEC format -- Secondary (Rear) Output */ |
| #define HCFG_GPINPUT0 0x00004000 /* External pin112 */ |
| #define HCFG_GPINPUT1 0x00002000 /* External pin110 */ |
| |
| #define HCFG_GPOUTPUT_MASK 0x00001c00 /* External pins which may be controlled */ |
| #define HCFG_GPOUT0 0x00001000 /* set to enable digital out on 5.1 cards */ |
| |
| #define HCFG_JOYENABLE 0x00000200 /* Internal joystick enable */ |
| #define HCFG_PHASETRACKENABLE 0x00000100 /* Phase tracking enable */ |
| /* 1 = Force all 3 async digital inputs to use */ |
| /* the same async sample rate tracker (ZVIDEO) */ |
| #define HCFG_AC3ENABLE_MASK 0x0x0000e0 /* AC3 async input control - Not implemented */ |
| #define HCFG_AC3ENABLE_ZVIDEO 0x00000080 /* Channels 0 and 1 replace ZVIDEO */ |
| #define HCFG_AC3ENABLE_CDSPDIF 0x00000040 /* Channels 0 and 1 replace CDSPDIF */ |
| #define HCFG_AC3ENABLE_GPSPDIF 0x00000020 /* Channels 0 and 1 replace GPSPDIF */ |
| #define HCFG_AUTOMUTE 0x00000010 /* When set, the async sample rate convertors */ |
| /* will automatically mute their output when */ |
| /* they are not rate-locked to the external */ |
| /* async audio source */ |
| #define HCFG_LOCKSOUNDCACHE 0x00000008 /* 1 = Cancel bustmaster accesses to soundcache */ |
| /* NOTE: This should generally never be used. */ |
| #define HCFG_LOCKTANKCACHE_MASK 0x00000004 /* 1 = Cancel bustmaster accesses to tankcache */ |
| /* NOTE: This should generally never be used. */ |
| #define HCFG_LOCKTANKCACHE 0x01020014 |
| #define HCFG_MUTEBUTTONENABLE 0x00000002 /* 1 = Master mute button sets AUDIOENABLE = 0. */ |
| /* NOTE: This is a 'cheap' way to implement a */ |
| /* master mute function on the mute button, and */ |
| /* in general should not be used unless a more */ |
| /* sophisticated master mute function has not */ |
| /* been written. */ |
| #define HCFG_AUDIOENABLE 0x00000001 /* 0 = CODECs transmit zero-valued samples */ |
| /* Should be set to 1 when the EMU10K1 is */ |
| /* completely initialized. */ |
| |
| //For Audigy, MPU port move to 0x70-0x74 ptr register |
| |
| #define MUDATA 0x18 /* MPU401 data register (8 bits) */ |
| |
| #define MUCMD 0x19 /* MPU401 command register (8 bits) */ |
| #define MUCMD_RESET 0xff /* RESET command */ |
| #define MUCMD_ENTERUARTMODE 0x3f /* Enter_UART_mode command */ |
| /* NOTE: All other commands are ignored */ |
| |
| #define MUSTAT MUCMD /* MPU401 status register (8 bits) */ |
| #define MUSTAT_IRDYN 0x80 /* 0 = MIDI data or command ACK */ |
| #define MUSTAT_ORDYN 0x40 /* 0 = MUDATA can accept a command or data */ |
| |
| #define A_IOCFG 0x18 /* GPIO on Audigy card (16bits) */ |
| #define A_GPINPUT_MASK 0xff00 |
| #define A_GPOUTPUT_MASK 0x00ff |
| |
| #define TIMER 0x1a /* Timer terminal count register (16-bit) */ |
| /* NOTE: After the rate is changed, a maximum */ |
| /* of 1024 sample periods should be allowed */ |
| /* before the new rate is guaranteed accurate. */ |
| #define TIMER_RATE_MASK 0x03ff /* Timer interrupt rate in sample periods */ |
| /* 0 == 1024 periods, [1..4] are not useful */ |
| |
| #define AC97DATA 0x1c /* AC97 register set data register (16 bit) */ |
| |
| #define AC97ADDRESS 0x1e /* AC97 register set address register (8 bit) */ |
| #define AC97ADDRESS_READY 0x80 /* Read-only bit, reflects CODEC READY signal */ |
| #define AC97ADDRESS_ADDRESS 0x7f /* Address of indexed AC97 register */ |
| |
| /********************************************************************************************************/ |
| /* Emu10k1 pointer-offset register set, accessed through the PTR and DATA registers */ |
| /********************************************************************************************************/ |
| |
| #define CPF 0x00 /* Current pitch and fraction register */ |
| #define CPF_CURRENTPITCH_MASK 0xffff0000 /* Current pitch (linear, 0x4000 == unity pitch shift) */ |
| #define CPF_CURRENTPITCH 0x10100000 |
| #define CPF_STEREO_MASK 0x00008000 /* 1 = Even channel interleave, odd channel locked */ |
| #define CPF_STOP_MASK 0x00004000 /* 1 = Current pitch forced to 0 */ |
| #define CPF_FRACADDRESS_MASK 0x00003fff /* Linear fractional address of the current channel */ |
| |
| #define PTRX 0x01 /* Pitch target and send A/B amounts register */ |
| #define PTRX_PITCHTARGET_MASK 0xffff0000 /* Pitch target of specified channel */ |
| #define PTRX_PITCHTARGET 0x10100001 |
| #define PTRX_FXSENDAMOUNT_A_MASK 0x0000ff00 /* Linear level of channel output sent to FX send bus A */ |
| #define PTRX_FXSENDAMOUNT_A 0x08080001 |
| #define PTRX_FXSENDAMOUNT_B_MASK 0x000000ff /* Linear level of channel output sent to FX send bus B */ |
| #define PTRX_FXSENDAMOUNT_B 0x08000001 |
| |
| #define CVCF 0x02 /* Current volume and filter cutoff register */ |
| #define CVCF_CURRENTVOL_MASK 0xffff0000 /* Current linear volume of specified channel */ |
| #define CVCF_CURRENTVOL 0x10100002 |
| #define CVCF_CURRENTFILTER_MASK 0x0000ffff /* Current filter cutoff frequency of specified channel */ |
| #define CVCF_CURRENTFILTER 0x10000002 |
| |
| #define VTFT 0x03 /* Volume target and filter cutoff target register */ |
| #define VTFT_VOLUMETARGET_MASK 0xffff0000 /* Volume target of specified channel */ |
| #define VTFT_FILTERTARGET_MASK 0x0000ffff /* Filter cutoff target of specified channel */ |
| |
| #define Z1 0x05 /* Filter delay memory 1 register */ |
| |
| #define Z2 0x04 /* Filter delay memory 2 register */ |
| |
| #define PSST 0x06 /* Send C amount and loop start address register */ |
| #define PSST_FXSENDAMOUNT_C_MASK 0xff000000 /* Linear level of channel output sent to FX send bus C */ |
| |
| #define PSST_FXSENDAMOUNT_C 0x08180006 |
| |
| #define PSST_LOOPSTARTADDR_MASK 0x00ffffff /* Loop start address of the specified channel */ |
| #define PSST_LOOPSTARTADDR 0x18000006 |
| |
| #define DSL 0x07 /* Send D amount and loop start address register */ |
| #define DSL_FXSENDAMOUNT_D_MASK 0xff000000 /* Linear level of channel output sent to FX send bus D */ |
| |
| #define DSL_FXSENDAMOUNT_D 0x08180007 |
| |
| #define DSL_LOOPENDADDR_MASK 0x00ffffff /* Loop end address of the specified channel */ |
| #define DSL_LOOPENDADDR 0x18000007 |
| |
| #define CCCA 0x08 /* Filter Q, interp. ROM, byte size, cur. addr register */ |
| #define CCCA_RESONANCE 0xf0000000 /* Lowpass filter resonance (Q) height */ |
| #define CCCA_INTERPROMMASK 0x0e000000 /* Selects passband of interpolation ROM */ |
| /* 1 == full band, 7 == lowpass */ |
| /* ROM 0 is used when pitch shifting downward or less */ |
| /* then 3 semitones upward. Increasingly higher ROM */ |
| /* numbers are used, typically in steps of 3 semitones, */ |
| /* as upward pitch shifting is performed. */ |
| #define CCCA_INTERPROM_0 0x00000000 /* Select interpolation ROM 0 */ |
| #define CCCA_INTERPROM_1 0x02000000 /* Select interpolation ROM 1 */ |
| #define CCCA_INTERPROM_2 0x04000000 /* Select interpolation ROM 2 */ |
| #define CCCA_INTERPROM_3 0x06000000 /* Select interpolation ROM 3 */ |
| #define CCCA_INTERPROM_4 0x08000000 /* Select interpolation ROM 4 */ |
| #define CCCA_INTERPROM_5 0x0a000000 /* Select interpolation ROM 5 */ |
| #define CCCA_INTERPROM_6 0x0c000000 /* Select interpolation ROM 6 */ |
| #define CCCA_INTERPROM_7 0x0e000000 /* Select interpolation ROM 7 */ |
| #define CCCA_8BITSELECT 0x01000000 /* 1 = Sound memory for this channel uses 8-bit samples */ |
| #define CCCA_CURRADDR_MASK 0x00ffffff /* Current address of the selected channel */ |
| #define CCCA_CURRADDR 0x18000008 |
| |
| #define CCR 0x09 /* Cache control register */ |
| #define CCR_CACHEINVALIDSIZE 0x07190009 |
| #define CCR_CACHEINVALIDSIZE_MASK 0xfe000000 /* Number of invalid samples cache for this channel */ |
| #define CCR_CACHELOOPFLAG 0x01000000 /* 1 = Cache has a loop service pending */ |
| #define CCR_INTERLEAVEDSAMPLES 0x00800000 /* 1 = A cache service will fetch interleaved samples */ |
| #define CCR_WORDSIZEDSAMPLES 0x00400000 /* 1 = A cache service will fetch word sized samples */ |
| #define CCR_READADDRESS 0x06100009 |
| #define CCR_READADDRESS_MASK 0x003f0000 /* Location of cache just beyond current cache service */ |
| #define CCR_LOOPINVALSIZE 0x0000fe00 /* Number of invalid samples in cache prior to loop */ |
| /* NOTE: This is valid only if CACHELOOPFLAG is set */ |
| #define CCR_LOOPFLAG 0x00000100 /* Set for a single sample period when a loop occurs */ |
| #define CCR_CACHELOOPADDRHI 0x000000ff /* DSL_LOOPSTARTADDR's hi byte if CACHELOOPFLAG is set */ |
| |
| #define CLP 0x0a /* Cache loop register (valid if CCR_CACHELOOPFLAG = 1) */ |
| /* NOTE: This register is normally not used */ |
| #define CLP_CACHELOOPADDR 0x0000ffff /* Cache loop address (DSL_LOOPSTARTADDR [0..15]) */ |
| |
| #define FXRT 0x0b /* Effects send routing register */ |
| /* NOTE: It is illegal to assign the same routing to */ |
| /* two effects sends. */ |
| #define FXRT_CHANNELA 0x000f0000 /* Effects send bus number for channel's effects send A */ |
| #define FXRT_CHANNELB 0x00f00000 /* Effects send bus number for channel's effects send B */ |
| #define FXRT_CHANNELC 0x0f000000 /* Effects send bus number for channel's effects send C */ |
| #define FXRT_CHANNELD 0xf0000000 /* Effects send bus number for channel's effects send D */ |
| |
| #define MAPA 0x0c /* Cache map A */ |
| |
| #define MAPB 0x0d /* Cache map B */ |
| |
| #define MAP_PTE_MASK 0xffffe000 /* The 19 MSBs of the PTE indexed by the PTI */ |
| #define MAP_PTI_MASK 0x00001fff /* The 13 bit index to one of the 8192 PTE dwords */ |
| |
| #define ENVVOL 0x10 /* Volume envelope register */ |
| #define ENVVOL_MASK 0x0000ffff /* Current value of volume envelope state variable */ |
| /* 0x8000-n == 666*n usec delay */ |
| |
| #define ATKHLDV 0x11 /* Volume envelope hold and attack register */ |
| #define ATKHLDV_PHASE0 0x00008000 /* 0 = Begin attack phase */ |
| #define ATKHLDV_HOLDTIME_MASK 0x00007f00 /* Envelope hold time (127-n == n*88.2msec) */ |
| #define ATKHLDV_ATTACKTIME_MASK 0x0000007f /* Envelope attack time, log encoded */ |
| /* 0 = infinite, 1 = 10.9msec, ... 0x7f = 5.5msec */ |
| |
| #define DCYSUSV 0x12 /* Volume envelope sustain and decay register */ |
| #define DCYSUSV_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */ |
| #define DCYSUSV_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */ |
| #define DCYSUSV_CHANNELENABLE_MASK 0x00000080 /* 1 = Inhibit envelope engine from writing values in */ |
| /* this channel and from writing to pitch, filter and */ |
| /* volume targets. */ |
| #define DCYSUSV_DECAYTIME_MASK 0x0000007f /* Volume envelope decay time, log encoded */ |
| /* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */ |
| |
| #define LFOVAL1 0x13 /* Modulation LFO value */ |
| #define LFOVAL_MASK 0x0000ffff /* Current value of modulation LFO state variable */ |
| /* 0x8000-n == 666*n usec delay */ |
| |
| #define ENVVAL 0x14 /* Modulation envelope register */ |
| #define ENVVAL_MASK 0x0000ffff /* Current value of modulation envelope state variable */ |
| /* 0x8000-n == 666*n usec delay */ |
| |
| #define ATKHLDM 0x15 /* Modulation envelope hold and attack register */ |
| #define ATKHLDM_PHASE0 0x00008000 /* 0 = Begin attack phase */ |
| #define ATKHLDM_HOLDTIME 0x00007f00 /* Envelope hold time (127-n == n*42msec) */ |
| #define ATKHLDM_ATTACKTIME 0x0000007f /* Envelope attack time, log encoded */ |
| /* 0 = infinite, 1 = 11msec, ... 0x7f = 5.5msec */ |
| |
| #define DCYSUSM 0x16 /* Modulation envelope decay and sustain register */ |
| #define DCYSUSM_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */ |
| #define DCYSUSM_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */ |
| #define DCYSUSM_DECAYTIME_MASK 0x0000007f /* Envelope decay time, log encoded */ |
| /* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */ |
| |
| #define LFOVAL2 0x17 /* Vibrato LFO register */ |
| #define LFOVAL2_MASK 0x0000ffff /* Current value of vibrato LFO state variable */ |
| /* 0x8000-n == 666*n usec delay */ |
| |
| #define IP 0x18 /* Initial pitch register */ |
| #define IP_MASK 0x0000ffff /* Exponential initial pitch shift */ |
| /* 4 bits of octave, 12 bits of fractional octave */ |
| #define IP_UNITY 0x0000e000 /* Unity pitch shift */ |
| |
| #define IFATN 0x19 /* Initial filter cutoff and attenuation register */ |
| #define IFATN_FILTERCUTOFF_MASK 0x0000ff00 /* Initial filter cutoff frequency in exponential units */ |
| /* 6 most significant bits are semitones */ |
| /* 2 least significant bits are fractions */ |
| #define IFATN_FILTERCUTOFF 0x08080019 |
| #define IFATN_ATTENUATION_MASK 0x000000ff /* Initial attenuation in 0.375dB steps */ |
| #define IFATN_ATTENUATION 0x08000019 |
| |
| |
| #define PEFE 0x1a /* Pitch envelope and filter envelope amount register */ |
| #define PEFE_PITCHAMOUNT_MASK 0x0000ff00 /* Pitch envlope amount */ |
| /* Signed 2's complement, +/- one octave peak extremes */ |
| #define PEFE_PITCHAMOUNT 0x0808001a |
| #define PEFE_FILTERAMOUNT_MASK 0x000000ff /* Filter envlope amount */ |
| /* Signed 2's complement, +/- six octaves peak extremes */ |
| #define PEFE_FILTERAMOUNT 0x0800001a |
| #define FMMOD 0x1b /* Vibrato/filter modulation from LFO register */ |
| #define FMMOD_MODVIBRATO 0x0000ff00 /* Vibrato LFO modulation depth */ |
| /* Signed 2's complement, +/- one octave extremes */ |
| #define FMMOD_MOFILTER 0x000000ff /* Filter LFO modulation depth */ |
| /* Signed 2's complement, +/- three octave extremes */ |
| |
| |
| #define TREMFRQ 0x1c /* Tremolo amount and modulation LFO frequency register */ |
| #define TREMFRQ_DEPTH 0x0000ff00 /* Tremolo depth */ |
| /* Signed 2's complement, with +/- 12dB extremes */ |
| #define TREMFRQ_FREQUENCY 0x000000ff /* Tremolo LFO frequency */ |
| /* ??Hz steps, maximum of ?? Hz. */ |
| |
| #define FM2FRQ2 0x1d /* Vibrato amount and vibrato LFO frequency register */ |
| #define FM2FRQ2_DEPTH 0x0000ff00 /* Vibrato LFO vibrato depth */ |
| /* Signed 2's complement, +/- one octave extremes */ |
| #define FM2FRQ2_FREQUENCY 0x000000ff /* Vibrato LFO frequency */ |
| /* 0.039Hz steps, maximum of 9.85 Hz. */ |
| |
| #define TEMPENV 0x1e /* Tempory envelope register */ |
| #define TEMPENV_MASK 0x0000ffff /* 16-bit value */ |
| /* NOTE: All channels contain internal variables; do */ |
| /* not write to these locations. */ |
| |
| #define CD0 0x20 /* Cache data 0 register */ |
| #define CD1 0x21 /* Cache data 1 register */ |
| #define CD2 0x22 /* Cache data 2 register */ |
| #define CD3 0x23 /* Cache data 3 register */ |
| #define CD4 0x24 /* Cache data 4 register */ |
| #define CD5 0x25 /* Cache data 5 register */ |
| #define CD6 0x26 /* Cache data 6 register */ |
| #define CD7 0x27 /* Cache data 7 register */ |
| #define CD8 0x28 /* Cache data 8 register */ |
| #define CD9 0x29 /* Cache data 9 register */ |
| #define CDA 0x2a /* Cache data A register */ |
| #define CDB 0x2b /* Cache data B register */ |
| #define CDC 0x2c /* Cache data C register */ |
| #define CDD 0x2d /* Cache data D register */ |
| #define CDE 0x2e /* Cache data E register */ |
| #define CDF 0x2f /* Cache data F register */ |
| |
| #define PTB 0x40 /* Page table base register */ |
| #define PTB_MASK 0xfffff000 /* Physical address of the page table in host memory */ |
| |
| #define TCB 0x41 /* Tank cache base register */ |
| #define TCB_MASK 0xfffff000 /* Physical address of the bottom of host based TRAM */ |
| |
| #define ADCCR 0x42 /* ADC sample rate/stereo control register */ |
| #define ADCCR_RCHANENABLE 0x00000010 /* Enables right channel for writing to the host */ |
| #define ADCCR_LCHANENABLE 0x00000008 /* Enables left channel for writing to the host */ |
| /* NOTE: To guarantee phase coherency, both channels */ |
| /* must be disabled prior to enabling both channels. */ |
| #define A_ADCCR_RCHANENABLE 0x00000020 |
| #define A_ADCCR_LCHANENABLE 0x00000010 |
| |
| #define A_ADCCR_SAMPLERATE_MASK 0x0000000F /* Audigy sample rate convertor output rate */ |
| #define ADCCR_SAMPLERATE_MASK 0x00000007 /* Sample rate convertor output rate */ |
| |
| #define ADCCR_SAMPLERATE_48 0x00000000 /* 48kHz sample rate */ |
| #define ADCCR_SAMPLERATE_44 0x00000001 /* 44.1kHz sample rate */ |
| #define ADCCR_SAMPLERATE_32 0x00000002 /* 32kHz sample rate */ |
| #define ADCCR_SAMPLERATE_24 0x00000003 /* 24kHz sample rate */ |
| #define ADCCR_SAMPLERATE_22 0x00000004 /* 22.05kHz sample rate */ |
| #define ADCCR_SAMPLERATE_16 0x00000005 /* 16kHz sample rate */ |
| #define ADCCR_SAMPLERATE_11 0x00000006 /* 11.025kHz sample rate */ |
| #define ADCCR_SAMPLERATE_8 0x00000007 /* 8kHz sample rate */ |
| |
| #define A_ADCCR_SAMPLERATE_12 0x00000006 /* 12kHz sample rate */ |
| #define A_ADCCR_SAMPLERATE_11 0x00000007 /* 11.025kHz sample rate */ |
| #define A_ADCCR_SAMPLERATE_8 0x00000008 /* 8kHz sample rate */ |
| |
| #define FXWC 0x43 /* FX output write channels register */ |
| /* When set, each bit enables the writing of the */ |
| /* corresponding FX output channel (internal registers */ |
| /* 0x20-0x3f) into host memory. This mode of recording */ |
| /* is 16bit, 48KHz only. All 32 channels can be enabled */ |
| /* simultaneously. */ |
| #define TCBS 0x44 /* Tank cache buffer size register */ |
| #define TCBS_MASK 0x00000007 /* Tank cache buffer size field */ |
| #define TCBS_BUFFSIZE_16K 0x00000000 |
| #define TCBS_BUFFSIZE_32K 0x00000001 |
| #define TCBS_BUFFSIZE_64K 0x00000002 |
| #define TCBS_BUFFSIZE_128K 0x00000003 |
| #define TCBS_BUFFSIZE_256K 0x00000004 |
| #define TCBS_BUFFSIZE_512K 0x00000005 |
| #define TCBS_BUFFSIZE_1024K 0x00000006 |
| #define TCBS_BUFFSIZE_2048K 0x00000007 |
| |
| #define MICBA 0x45 /* AC97 microphone buffer address register */ |
| #define MICBA_MASK 0xfffff000 /* 20 bit base address */ |
| |
| #define ADCBA 0x46 /* ADC buffer address register */ |
| #define ADCBA_MASK 0xfffff000 /* 20 bit base address */ |
| |
| #define FXBA 0x47 /* FX Buffer Address */ |
| #define FXBA_MASK 0xfffff000 /* 20 bit base address */ |
| |
| #define MICBS 0x49 /* Microphone buffer size register */ |
| |
| #define ADCBS 0x4a /* ADC buffer size register */ |
| |
| #define FXBS 0x4b /* FX buffer size register */ |
| |
| /* The following mask values define the size of the ADC, MIX and FX buffers in bytes */ |
| #define ADCBS_BUFSIZE_NONE 0x00000000 |
| #define ADCBS_BUFSIZE_384 0x00000001 |
| #define ADCBS_BUFSIZE_448 0x00000002 |
| #define ADCBS_BUFSIZE_512 0x00000003 |
| #define ADCBS_BUFSIZE_640 0x00000004 |
| #define ADCBS_BUFSIZE_768 0x00000005 |
| #define ADCBS_BUFSIZE_896 0x00000006 |
| #define ADCBS_BUFSIZE_1024 0x00000007 |
| #define ADCBS_BUFSIZE_1280 0x00000008 |
| #define ADCBS_BUFSIZE_1536 0x00000009 |
| #define ADCBS_BUFSIZE_1792 0x0000000a |
| #define ADCBS_BUFSIZE_2048 0x0000000b |
| #define ADCBS_BUFSIZE_2560 0x0000000c |
| #define ADCBS_BUFSIZE_3072 0x0000000d |
| #define ADCBS_BUFSIZE_3584 0x0000000e |
| #define ADCBS_BUFSIZE_4096 0x0000000f |
| #define ADCBS_BUFSIZE_5120 0x00000010 |
| #define ADCBS_BUFSIZE_6144 0x00000011 |
| #define ADCBS_BUFSIZE_7168 0x00000012 |
| #define ADCBS_BUFSIZE_8192 0x00000013 |
| #define ADCBS_BUFSIZE_10240 0x00000014 |
| #define ADCBS_BUFSIZE_12288 0x00000015 |
| #define ADCBS_BUFSIZE_14366 0x00000016 |
| #define ADCBS_BUFSIZE_16384 0x00000017 |
| #define ADCBS_BUFSIZE_20480 0x00000018 |
| #define ADCBS_BUFSIZE_24576 0x00000019 |
| #define ADCBS_BUFSIZE_28672 0x0000001a |
| #define ADCBS_BUFSIZE_32768 0x0000001b |
| #define ADCBS_BUFSIZE_40960 0x0000001c |
| #define ADCBS_BUFSIZE_49152 0x0000001d |
| #define ADCBS_BUFSIZE_57344 0x0000001e |
| #define ADCBS_BUFSIZE_65536 0x0000001f |
| |
| |
| #define CDCS 0x50 /* CD-ROM digital channel status register */ |
| |
| #define GPSCS 0x51 /* General Purpose SPDIF channel status register*/ |
| |
| #define DBG 0x52 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */ |
| |
| /* definitions for debug register - taken from the alsa drivers */ |
| #define DBG_ZC 0x80000000 /* zero tram counter */ |
| #define DBG_SATURATION_OCCURED 0x02000000 /* saturation control */ |
| #define DBG_SATURATION_ADDR 0x01ff0000 /* saturation address */ |
| #define DBG_SINGLE_STEP 0x00008000 /* single step mode */ |
| #define DBG_STEP 0x00004000 /* start single step */ |
| #define DBG_CONDITION_CODE 0x00003e00 /* condition code */ |
| #define DBG_SINGLE_STEP_ADDR 0x000001ff /* single step address */ |
| |
| |
| #define REG53 0x53 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */ |
| |
| #define A_DBG 0x53 |
| #define A_DBG_SINGLE_STEP 0x00020000 /* Set to zero to start dsp */ |
| #define A_DBG_ZC 0x40000000 /* zero tram counter */ |
| #define A_DBG_STEP_ADDR 0x000003ff |
| #define A_DBG_SATURATION_OCCURED 0x20000000 |
| #define A_DBG_SATURATION_ADDR 0x0ffc0000 |
| |
| #define SPCS0 0x54 /* SPDIF output Channel Status 0 register */ |
| |
| #define SPCS1 0x55 /* SPDIF output Channel Status 1 register */ |
| |
| #define SPCS2 0x56 /* SPDIF output Channel Status 2 register */ |
| |
| #define SPCS_CLKACCYMASK 0x30000000 /* Clock accuracy */ |
| #define SPCS_CLKACCY_1000PPM 0x00000000 /* 1000 parts per million */ |
| #define SPCS_CLKACCY_50PPM 0x10000000 /* 50 parts per million */ |
| #define SPCS_CLKACCY_VARIABLE 0x20000000 /* Variable accuracy */ |
| #define SPCS_SAMPLERATEMASK 0x0f000000 /* Sample rate */ |
| #define SPCS_SAMPLERATE_44 0x00000000 /* 44.1kHz sample rate */ |
| #define SPCS_SAMPLERATE_48 0x02000000 /* 48kHz sample rate */ |
| #define SPCS_SAMPLERATE_32 0x03000000 /* 32kHz sample rate */ |
| #define SPCS_CHANNELNUMMASK 0x00f00000 /* Channel number */ |
| #define SPCS_CHANNELNUM_UNSPEC 0x00000000 /* Unspecified channel number */ |
| #define SPCS_CHANNELNUM_LEFT 0x00100000 /* Left channel */ |
| #define SPCS_CHANNELNUM_RIGHT 0x00200000 /* Right channel */ |
| #define SPCS_SOURCENUMMASK 0x000f0000 /* Source number */ |
| #define SPCS_SOURCENUM_UNSPEC 0x00000000 /* Unspecified source number */ |
| #define SPCS_GENERATIONSTATUS 0x00008000 /* Originality flag (see IEC-958 spec) */ |
| #define SPCS_CATEGORYCODEMASK 0x00007f00 /* Category code (see IEC-958 spec) */ |
| #define SPCS_MODEMASK 0x000000c0 /* Mode (see IEC-958 spec) */ |
| #define SPCS_EMPHASISMASK 0x00000038 /* Emphasis */ |
| #define SPCS_EMPHASIS_NONE 0x00000000 /* No emphasis */ |
| #define SPCS_EMPHASIS_50_15 0x00000008 /* 50/15 usec 2 channel */ |
| #define SPCS_COPYRIGHT 0x00000004 /* Copyright asserted flag -- do not modify */ |
| #define SPCS_NOTAUDIODATA 0x00000002 /* 0 = Digital audio, 1 = not audio */ |
| #define SPCS_PROFESSIONAL 0x00000001 /* 0 = Consumer (IEC-958), 1 = pro (AES3-1992) */ |
| |
| /* The 32-bit CLIx and SOLx registers all have one bit per channel control/status */ |
| #define CLIEL 0x58 /* Channel loop interrupt enable low register */ |
| |
| #define CLIEH 0x59 /* Channel loop interrupt enable high register */ |
| |
| #define CLIPL 0x5a /* Channel loop interrupt pending low register */ |
| |
| #define CLIPH 0x5b /* Channel loop interrupt pending high register */ |
| |
| #define SOLEL 0x5c /* Stop on loop enable low register */ |
| |
| #define SOLEH 0x5d /* Stop on loop enable high register */ |
| |
| #define SPBYPASS 0x5e /* SPDIF BYPASS mode register */ |
| #define SPBYPASS_ENABLE 0x00000001 /* Enable SPDIF bypass mode */ |
| |
| #define AC97SLOT 0x5f /* additional AC97 slots enable bits */ |
| #define AC97SLOT_CNTR 0x10 /* Center enable */ |
| #define AC97SLOT_LFE 0x20 /* LFE enable */ |
| |
| #define CDSRCS 0x60 /* CD-ROM Sample Rate Converter status register */ |
| |
| #define GPSRCS 0x61 /* General Purpose SPDIF sample rate cvt status */ |
| |
| #define ZVSRCS 0x62 /* ZVideo sample rate converter status */ |
| /* NOTE: This one has no SPDIFLOCKED field */ |
| /* Assumes sample lock */ |
| |
| /* These three bitfields apply to CDSRCS, GPSRCS, and (except as noted) ZVSRCS. */ |
| #define SRCS_SPDIFLOCKED 0x02000000 /* SPDIF stream locked */ |
| #define SRCS_RATELOCKED 0x01000000 /* Sample rate locked */ |
| #define SRCS_ESTSAMPLERATE 0x0007ffff /* Do not modify this field. */ |
| |
| |
| /* Note that these values can vary +/- by a small amount */ |
| #define SRCS_SPDIFRATE_44 0x0003acd9 |
| #define SRCS_SPDIFRATE_48 0x00040000 |
| #define SRCS_SPDIFRATE_96 0x00080000 |
| |
| #define MICIDX 0x63 /* Microphone recording buffer index register */ |
| #define MICIDX_MASK 0x0000ffff /* 16-bit value */ |
| #define MICIDX_IDX 0x10000063 |
| |
| #define A_ADCIDX 0x63 |
| #define A_ADCIDX_IDX 0x10000063 |
| |
| #define ADCIDX 0x64 /* ADC recording buffer index register */ |
| #define ADCIDX_MASK 0x0000ffff /* 16 bit index field */ |
| #define ADCIDX_IDX 0x10000064 |
| |
| #define FXIDX 0x65 /* FX recording buffer index register */ |
| #define FXIDX_MASK 0x0000ffff /* 16-bit value */ |
| #define FXIDX_IDX 0x10000065 |
| |
| /* This is the MPU port on the card (via the game port) */ |
| #define A_MUDATA1 0x70 |
| #define A_MUCMD1 0x71 |
| #define A_MUSTAT1 A_MUCMD1 |
| |
| /* This is the MPU port on the Audigy Drive */ |
| #define A_MUDATA2 0x72 |
| #define A_MUCMD2 0x73 |
| #define A_MUSTAT2 A_MUCMD2 |
| |
| /* The next two are the Audigy equivalent of FXWC */ |
| /* the Audigy can record any output (16bit, 48kHz, up to 64 channel simultaneously) */ |
| /* Each bit selects a channel for recording */ |
| #define A_FXWC1 0x74 /* Selects 0x7f-0x60 for FX recording */ |
| #define A_FXWC2 0x75 /* Selects 0x9f-0x80 for FX recording */ |
| |
| #define A_SPDIF_SAMPLERATE 0x76 /* Set the sample rate of SPDIF output */ |
| #define A_SPDIF_48000 0x00000080 |
| #define A_SPDIF_44100 0x00000000 |
| #define A_SPDIF_96000 0x00000040 |
| |
| #define A_FXRT2 0x7c |
| #define A_FXRT_CHANNELE 0x0000003f /* Effects send bus number for channel's effects send E */ |
| #define A_FXRT_CHANNELF 0x00003f00 /* Effects send bus number for channel's effects send F */ |
| #define A_FXRT_CHANNELG 0x003f0000 /* Effects send bus number for channel's effects send G */ |
| #define A_FXRT_CHANNELH 0x3f000000 /* Effects send bus number for channel's effects send H */ |
| |
| #define A_SENDAMOUNTS 0x7d |
| #define A_FXSENDAMOUNT_E_MASK 0xff000000 |
| #define A_FXSENDAMOUNT_F_MASK 0x00ff0000 |
| #define A_FXSENDAMOUNT_G_MASK 0x0000ff00 |
| #define A_FXSENDAMOUNT_H_MASK 0x000000ff |
| |
| /* The send amounts for this one are the same as used with the emu10k1 */ |
| #define A_FXRT1 0x7e |
| #define A_FXRT_CHANNELA 0x0000003f |
| #define A_FXRT_CHANNELB 0x00003f00 |
| #define A_FXRT_CHANNELC 0x003f0000 |
| #define A_FXRT_CHANNELD 0x3f000000 |
| |
| |
| /* Each FX general purpose register is 32 bits in length, all bits are used */ |
| #define FXGPREGBASE 0x100 /* FX general purpose registers base */ |
| #define A_FXGPREGBASE 0x400 /* Audigy GPRs, 0x400 to 0x5ff */ |
| /* Tank audio data is logarithmically compressed down to 16 bits before writing to TRAM and is */ |
| /* decompressed back to 20 bits on a read. There are a total of 160 locations, the last 32 */ |
| /* locations are for external TRAM. */ |
| #define TANKMEMDATAREGBASE 0x200 /* Tank memory data registers base */ |
| #define TANKMEMDATAREG_MASK 0x000fffff /* 20 bit tank audio data field */ |
| |
| /* Combined address field and memory opcode or flag field. 160 locations, last 32 are external */ |
| #define TANKMEMADDRREGBASE 0x300 /* Tank memory address registers base */ |
| #define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */ |
| #define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */ |
| #define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */ |
| #define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */ |
| #define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */ |
| |
| #define MICROCODEBASE 0x400 /* Microcode data base address */ |
| |
| /* Each DSP microcode instruction is mapped into 2 doublewords */ |
| /* NOTE: When writing, always write the LO doubleword first. Reads can be in either order. */ |
| #define LOWORD_OPX_MASK 0x000ffc00 /* Instruction operand X */ |
| #define LOWORD_OPY_MASK 0x000003ff /* Instruction operand Y */ |
| #define HIWORD_OPCODE_MASK 0x00f00000 /* Instruction opcode */ |
| #define HIWORD_RESULT_MASK 0x000ffc00 /* Instruction result */ |
| #define HIWORD_OPA_MASK 0x000003ff /* Instruction operand A */ |
| |
| |
| /* Audigy Soundcard have a different instruction format */ |
| #define AUDIGY_CODEBASE 0x600 |
| #define A_LOWORD_OPY_MASK 0x000007ff |
| #define A_LOWORD_OPX_MASK 0x007ff000 |
| #define A_HIWORD_OPCODE_MASK 0x0f000000 |
| #define A_HIWORD_RESULT_MASK 0x007ff000 |
| #define A_HIWORD_OPA_MASK 0x000007ff |
| |
| |
| #endif /* _8010_H */ |