| /* linux/arch/arm/common/pl330.c | 
 |  * | 
 |  * Copyright (C) 2010 Samsung Electronics Co Ltd. | 
 |  *	Jaswinder Singh <jassi.brar@samsung.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/module.h> | 
 | #include <linux/string.h> | 
 | #include <linux/io.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/dma-mapping.h> | 
 |  | 
 | #include <asm/hardware/pl330.h> | 
 |  | 
 | /* Register and Bit field Definitions */ | 
 | #define DS		0x0 | 
 | #define DS_ST_STOP	0x0 | 
 | #define DS_ST_EXEC	0x1 | 
 | #define DS_ST_CMISS	0x2 | 
 | #define DS_ST_UPDTPC	0x3 | 
 | #define DS_ST_WFE	0x4 | 
 | #define DS_ST_ATBRR	0x5 | 
 | #define DS_ST_QBUSY	0x6 | 
 | #define DS_ST_WFP	0x7 | 
 | #define DS_ST_KILL	0x8 | 
 | #define DS_ST_CMPLT	0x9 | 
 | #define DS_ST_FLTCMP	0xe | 
 | #define DS_ST_FAULT	0xf | 
 |  | 
 | #define DPC		0x4 | 
 | #define INTEN		0x20 | 
 | #define ES		0x24 | 
 | #define INTSTATUS	0x28 | 
 | #define INTCLR		0x2c | 
 | #define FSM		0x30 | 
 | #define FSC		0x34 | 
 | #define FTM		0x38 | 
 |  | 
 | #define _FTC		0x40 | 
 | #define FTC(n)		(_FTC + (n)*0x4) | 
 |  | 
 | #define _CS		0x100 | 
 | #define CS(n)		(_CS + (n)*0x8) | 
 | #define CS_CNS		(1 << 21) | 
 |  | 
 | #define _CPC		0x104 | 
 | #define CPC(n)		(_CPC + (n)*0x8) | 
 |  | 
 | #define _SA		0x400 | 
 | #define SA(n)		(_SA + (n)*0x20) | 
 |  | 
 | #define _DA		0x404 | 
 | #define DA(n)		(_DA + (n)*0x20) | 
 |  | 
 | #define _CC		0x408 | 
 | #define CC(n)		(_CC + (n)*0x20) | 
 |  | 
 | #define CC_SRCINC	(1 << 0) | 
 | #define CC_DSTINC	(1 << 14) | 
 | #define CC_SRCPRI	(1 << 8) | 
 | #define CC_DSTPRI	(1 << 22) | 
 | #define CC_SRCNS	(1 << 9) | 
 | #define CC_DSTNS	(1 << 23) | 
 | #define CC_SRCIA	(1 << 10) | 
 | #define CC_DSTIA	(1 << 24) | 
 | #define CC_SRCBRSTLEN_SHFT	4 | 
 | #define CC_DSTBRSTLEN_SHFT	18 | 
 | #define CC_SRCBRSTSIZE_SHFT	1 | 
 | #define CC_DSTBRSTSIZE_SHFT	15 | 
 | #define CC_SRCCCTRL_SHFT	11 | 
 | #define CC_SRCCCTRL_MASK	0x7 | 
 | #define CC_DSTCCTRL_SHFT	25 | 
 | #define CC_DRCCCTRL_MASK	0x7 | 
 | #define CC_SWAP_SHFT	28 | 
 |  | 
 | #define _LC0		0x40c | 
 | #define LC0(n)		(_LC0 + (n)*0x20) | 
 |  | 
 | #define _LC1		0x410 | 
 | #define LC1(n)		(_LC1 + (n)*0x20) | 
 |  | 
 | #define DBGSTATUS	0xd00 | 
 | #define DBG_BUSY	(1 << 0) | 
 |  | 
 | #define DBGCMD		0xd04 | 
 | #define DBGINST0	0xd08 | 
 | #define DBGINST1	0xd0c | 
 |  | 
 | #define CR0		0xe00 | 
 | #define CR1		0xe04 | 
 | #define CR2		0xe08 | 
 | #define CR3		0xe0c | 
 | #define CR4		0xe10 | 
 | #define CRD		0xe14 | 
 |  | 
 | #define PERIPH_ID	0xfe0 | 
 | #define PCELL_ID	0xff0 | 
 |  | 
 | #define CR0_PERIPH_REQ_SET	(1 << 0) | 
 | #define CR0_BOOT_EN_SET		(1 << 1) | 
 | #define CR0_BOOT_MAN_NS		(1 << 2) | 
 | #define CR0_NUM_CHANS_SHIFT	4 | 
 | #define CR0_NUM_CHANS_MASK	0x7 | 
 | #define CR0_NUM_PERIPH_SHIFT	12 | 
 | #define CR0_NUM_PERIPH_MASK	0x1f | 
 | #define CR0_NUM_EVENTS_SHIFT	17 | 
 | #define CR0_NUM_EVENTS_MASK	0x1f | 
 |  | 
 | #define CR1_ICACHE_LEN_SHIFT	0 | 
 | #define CR1_ICACHE_LEN_MASK	0x7 | 
 | #define CR1_NUM_ICACHELINES_SHIFT	4 | 
 | #define CR1_NUM_ICACHELINES_MASK	0xf | 
 |  | 
 | #define CRD_DATA_WIDTH_SHIFT	0 | 
 | #define CRD_DATA_WIDTH_MASK	0x7 | 
 | #define CRD_WR_CAP_SHIFT	4 | 
 | #define CRD_WR_CAP_MASK		0x7 | 
 | #define CRD_WR_Q_DEP_SHIFT	8 | 
 | #define CRD_WR_Q_DEP_MASK	0xf | 
 | #define CRD_RD_CAP_SHIFT	12 | 
 | #define CRD_RD_CAP_MASK		0x7 | 
 | #define CRD_RD_Q_DEP_SHIFT	16 | 
 | #define CRD_RD_Q_DEP_MASK	0xf | 
 | #define CRD_DATA_BUFF_SHIFT	20 | 
 | #define CRD_DATA_BUFF_MASK	0x3ff | 
 |  | 
 | #define	PART		0x330 | 
 | #define DESIGNER	0x41 | 
 | #define REVISION	0x0 | 
 | #define INTEG_CFG	0x0 | 
 | #define PERIPH_ID_VAL	((PART << 0) | (DESIGNER << 12)) | 
 |  | 
 | #define PCELL_ID_VAL	0xb105f00d | 
 |  | 
 | #define PL330_STATE_STOPPED		(1 << 0) | 
 | #define PL330_STATE_EXECUTING		(1 << 1) | 
 | #define PL330_STATE_WFE			(1 << 2) | 
 | #define PL330_STATE_FAULTING		(1 << 3) | 
 | #define PL330_STATE_COMPLETING		(1 << 4) | 
 | #define PL330_STATE_WFP			(1 << 5) | 
 | #define PL330_STATE_KILLING		(1 << 6) | 
 | #define PL330_STATE_FAULT_COMPLETING	(1 << 7) | 
 | #define PL330_STATE_CACHEMISS		(1 << 8) | 
 | #define PL330_STATE_UPDTPC		(1 << 9) | 
 | #define PL330_STATE_ATBARRIER		(1 << 10) | 
 | #define PL330_STATE_QUEUEBUSY		(1 << 11) | 
 | #define PL330_STATE_INVALID		(1 << 15) | 
 |  | 
 | #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \ | 
 | 				| PL330_STATE_WFE | PL330_STATE_FAULTING) | 
 |  | 
 | #define CMD_DMAADDH	0x54 | 
 | #define CMD_DMAEND	0x00 | 
 | #define CMD_DMAFLUSHP	0x35 | 
 | #define CMD_DMAGO	0xa0 | 
 | #define CMD_DMALD	0x04 | 
 | #define CMD_DMALDP	0x25 | 
 | #define CMD_DMALP	0x20 | 
 | #define CMD_DMALPEND	0x28 | 
 | #define CMD_DMAKILL	0x01 | 
 | #define CMD_DMAMOV	0xbc | 
 | #define CMD_DMANOP	0x18 | 
 | #define CMD_DMARMB	0x12 | 
 | #define CMD_DMASEV	0x34 | 
 | #define CMD_DMAST	0x08 | 
 | #define CMD_DMASTP	0x29 | 
 | #define CMD_DMASTZ	0x0c | 
 | #define CMD_DMAWFE	0x36 | 
 | #define CMD_DMAWFP	0x30 | 
 | #define CMD_DMAWMB	0x13 | 
 |  | 
 | #define SZ_DMAADDH	3 | 
 | #define SZ_DMAEND	1 | 
 | #define SZ_DMAFLUSHP	2 | 
 | #define SZ_DMALD	1 | 
 | #define SZ_DMALDP	2 | 
 | #define SZ_DMALP	2 | 
 | #define SZ_DMALPEND	2 | 
 | #define SZ_DMAKILL	1 | 
 | #define SZ_DMAMOV	6 | 
 | #define SZ_DMANOP	1 | 
 | #define SZ_DMARMB	1 | 
 | #define SZ_DMASEV	2 | 
 | #define SZ_DMAST	1 | 
 | #define SZ_DMASTP	2 | 
 | #define SZ_DMASTZ	1 | 
 | #define SZ_DMAWFE	2 | 
 | #define SZ_DMAWFP	2 | 
 | #define SZ_DMAWMB	1 | 
 | #define SZ_DMAGO	6 | 
 |  | 
 | #define BRST_LEN(ccr)	((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1) | 
 | #define BRST_SIZE(ccr)	(1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7)) | 
 |  | 
 | #define BYTE_TO_BURST(b, ccr)  ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr)) | 
 | #define BURST_TO_BYTE(c, ccr)  ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr)) | 
 |  | 
 | /* | 
 |  * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req | 
 |  * at 1byte/burst for P<->M and M<->M respectively. | 
 |  * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req | 
 |  * should be enough for P<->M and M<->M respectively. | 
 |  */ | 
 | #define MCODE_BUFF_PER_REQ	256 | 
 |  | 
 | /* | 
 |  * Mark a _pl330_req as free. | 
 |  * We do it by writing DMAEND as the first instruction | 
 |  * because no valid request is going to have DMAEND as | 
 |  * its first instruction to execute. | 
 |  */ | 
 | #define MARK_FREE(req)	do { \ | 
 | 				_emit_END(0, (req)->mc_cpu); \ | 
 | 				(req)->mc_len = 0; \ | 
 | 			} while (0) | 
 |  | 
 | /* If the _pl330_req is available to the client */ | 
 | #define IS_FREE(req)	(*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) | 
 |  | 
 | /* Use this _only_ to wait on transient states */ | 
 | #define UNTIL(t, s)	while (!(_state(t) & (s))) cpu_relax(); | 
 |  | 
 | #ifdef PL330_DEBUG_MCGEN | 
 | static unsigned cmd_line; | 
 | #define PL330_DBGCMD_DUMP(off, x...)	do { \ | 
 | 						printk("%x:", cmd_line); \ | 
 | 						printk(x); \ | 
 | 						cmd_line += off; \ | 
 | 					} while (0) | 
 | #define PL330_DBGMC_START(addr)		(cmd_line = addr) | 
 | #else | 
 | #define PL330_DBGCMD_DUMP(off, x...)	do {} while (0) | 
 | #define PL330_DBGMC_START(addr)		do {} while (0) | 
 | #endif | 
 |  | 
 | struct _xfer_spec { | 
 | 	u32 ccr; | 
 | 	struct pl330_req *r; | 
 | 	struct pl330_xfer *x; | 
 | }; | 
 |  | 
 | enum dmamov_dst { | 
 | 	SAR = 0, | 
 | 	CCR, | 
 | 	DAR, | 
 | }; | 
 |  | 
 | enum pl330_dst { | 
 | 	SRC = 0, | 
 | 	DST, | 
 | }; | 
 |  | 
 | enum pl330_cond { | 
 | 	SINGLE, | 
 | 	BURST, | 
 | 	ALWAYS, | 
 | }; | 
 |  | 
 | struct _pl330_req { | 
 | 	u32 mc_bus; | 
 | 	void *mc_cpu; | 
 | 	/* Number of bytes taken to setup MC for the req */ | 
 | 	u32 mc_len; | 
 | 	struct pl330_req *r; | 
 | 	/* Hook to attach to DMAC's list of reqs with due callback */ | 
 | 	struct list_head rqd; | 
 | }; | 
 |  | 
 | /* ToBeDone for tasklet */ | 
 | struct _pl330_tbd { | 
 | 	bool reset_dmac; | 
 | 	bool reset_mngr; | 
 | 	u8 reset_chan; | 
 | }; | 
 |  | 
 | /* A DMAC Thread */ | 
 | struct pl330_thread { | 
 | 	u8 id; | 
 | 	int ev; | 
 | 	/* If the channel is not yet acquired by any client */ | 
 | 	bool free; | 
 | 	/* Parent DMAC */ | 
 | 	struct pl330_dmac *dmac; | 
 | 	/* Only two at a time */ | 
 | 	struct _pl330_req req[2]; | 
 | 	/* Index of the last submitted request */ | 
 | 	unsigned lstenq; | 
 | }; | 
 |  | 
 | enum pl330_dmac_state { | 
 | 	UNINIT, | 
 | 	INIT, | 
 | 	DYING, | 
 | }; | 
 |  | 
 | /* A DMAC */ | 
 | struct pl330_dmac { | 
 | 	spinlock_t		lock; | 
 | 	/* Holds list of reqs with due callbacks */ | 
 | 	struct list_head	req_done; | 
 | 	/* Pointer to platform specific stuff */ | 
 | 	struct pl330_info	*pinfo; | 
 | 	/* Maximum possible events/irqs */ | 
 | 	int			events[32]; | 
 | 	/* BUS address of MicroCode buffer */ | 
 | 	u32			mcode_bus; | 
 | 	/* CPU address of MicroCode buffer */ | 
 | 	void			*mcode_cpu; | 
 | 	/* List of all Channel threads */ | 
 | 	struct pl330_thread	*channels; | 
 | 	/* Pointer to the MANAGER thread */ | 
 | 	struct pl330_thread	*manager; | 
 | 	/* To handle bad news in interrupt */ | 
 | 	struct tasklet_struct	tasks; | 
 | 	struct _pl330_tbd	dmac_tbd; | 
 | 	/* State of DMAC operation */ | 
 | 	enum pl330_dmac_state	state; | 
 | }; | 
 |  | 
 | static inline void _callback(struct pl330_req *r, enum pl330_op_err err) | 
 | { | 
 | 	if (r && r->xfer_cb) | 
 | 		r->xfer_cb(r->token, err); | 
 | } | 
 |  | 
 | static inline bool _queue_empty(struct pl330_thread *thrd) | 
 | { | 
 | 	return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1])) | 
 | 		? true : false; | 
 | } | 
 |  | 
 | static inline bool _queue_full(struct pl330_thread *thrd) | 
 | { | 
 | 	return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1])) | 
 | 		? false : true; | 
 | } | 
 |  | 
 | static inline bool is_manager(struct pl330_thread *thrd) | 
 | { | 
 | 	struct pl330_dmac *pl330 = thrd->dmac; | 
 |  | 
 | 	/* MANAGER is indexed at the end */ | 
 | 	if (thrd->id == pl330->pinfo->pcfg.num_chan) | 
 | 		return true; | 
 | 	else | 
 | 		return false; | 
 | } | 
 |  | 
 | /* If manager of the thread is in Non-Secure mode */ | 
 | static inline bool _manager_ns(struct pl330_thread *thrd) | 
 | { | 
 | 	struct pl330_dmac *pl330 = thrd->dmac; | 
 |  | 
 | 	return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false; | 
 | } | 
 |  | 
 | static inline u32 get_id(struct pl330_info *pi, u32 off) | 
 | { | 
 | 	void __iomem *regs = pi->base; | 
 | 	u32 id = 0; | 
 |  | 
 | 	id |= (readb(regs + off + 0x0) << 0); | 
 | 	id |= (readb(regs + off + 0x4) << 8); | 
 | 	id |= (readb(regs + off + 0x8) << 16); | 
 | 	id |= (readb(regs + off + 0xc) << 24); | 
 |  | 
 | 	return id; | 
 | } | 
 |  | 
 | static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[], | 
 | 		enum pl330_dst da, u16 val) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMAADDH; | 
 |  | 
 | 	buf[0] = CMD_DMAADDH; | 
 | 	buf[0] |= (da << 1); | 
 | 	*((u16 *)&buf[1]) = val; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n", | 
 | 		da == 1 ? "DA" : "SA", val); | 
 |  | 
 | 	return SZ_DMAADDH; | 
 | } | 
 |  | 
 | static inline u32 _emit_END(unsigned dry_run, u8 buf[]) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMAEND; | 
 |  | 
 | 	buf[0] = CMD_DMAEND; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n"); | 
 |  | 
 | 	return SZ_DMAEND; | 
 | } | 
 |  | 
 | static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMAFLUSHP; | 
 |  | 
 | 	buf[0] = CMD_DMAFLUSHP; | 
 |  | 
 | 	peri &= 0x1f; | 
 | 	peri <<= 3; | 
 | 	buf[1] = peri; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3); | 
 |  | 
 | 	return SZ_DMAFLUSHP; | 
 | } | 
 |  | 
 | static inline u32 _emit_LD(unsigned dry_run, u8 buf[],	enum pl330_cond cond) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMALD; | 
 |  | 
 | 	buf[0] = CMD_DMALD; | 
 |  | 
 | 	if (cond == SINGLE) | 
 | 		buf[0] |= (0 << 1) | (1 << 0); | 
 | 	else if (cond == BURST) | 
 | 		buf[0] |= (1 << 1) | (1 << 0); | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n", | 
 | 		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); | 
 |  | 
 | 	return SZ_DMALD; | 
 | } | 
 |  | 
 | static inline u32 _emit_LDP(unsigned dry_run, u8 buf[], | 
 | 		enum pl330_cond cond, u8 peri) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMALDP; | 
 |  | 
 | 	buf[0] = CMD_DMALDP; | 
 |  | 
 | 	if (cond == BURST) | 
 | 		buf[0] |= (1 << 1); | 
 |  | 
 | 	peri &= 0x1f; | 
 | 	peri <<= 3; | 
 | 	buf[1] = peri; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n", | 
 | 		cond == SINGLE ? 'S' : 'B', peri >> 3); | 
 |  | 
 | 	return SZ_DMALDP; | 
 | } | 
 |  | 
 | static inline u32 _emit_LP(unsigned dry_run, u8 buf[], | 
 | 		unsigned loop, u8 cnt) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMALP; | 
 |  | 
 | 	buf[0] = CMD_DMALP; | 
 |  | 
 | 	if (loop) | 
 | 		buf[0] |= (1 << 1); | 
 |  | 
 | 	cnt--; /* DMAC increments by 1 internally */ | 
 | 	buf[1] = cnt; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt); | 
 |  | 
 | 	return SZ_DMALP; | 
 | } | 
 |  | 
 | struct _arg_LPEND { | 
 | 	enum pl330_cond cond; | 
 | 	bool forever; | 
 | 	unsigned loop; | 
 | 	u8 bjump; | 
 | }; | 
 |  | 
 | static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[], | 
 | 		const struct _arg_LPEND *arg) | 
 | { | 
 | 	enum pl330_cond cond = arg->cond; | 
 | 	bool forever = arg->forever; | 
 | 	unsigned loop = arg->loop; | 
 | 	u8 bjump = arg->bjump; | 
 |  | 
 | 	if (dry_run) | 
 | 		return SZ_DMALPEND; | 
 |  | 
 | 	buf[0] = CMD_DMALPEND; | 
 |  | 
 | 	if (loop) | 
 | 		buf[0] |= (1 << 2); | 
 |  | 
 | 	if (!forever) | 
 | 		buf[0] |= (1 << 4); | 
 |  | 
 | 	if (cond == SINGLE) | 
 | 		buf[0] |= (0 << 1) | (1 << 0); | 
 | 	else if (cond == BURST) | 
 | 		buf[0] |= (1 << 1) | (1 << 0); | 
 |  | 
 | 	buf[1] = bjump; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n", | 
 | 			forever ? "FE" : "END", | 
 | 			cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'), | 
 | 			loop ? '1' : '0', | 
 | 			bjump); | 
 |  | 
 | 	return SZ_DMALPEND; | 
 | } | 
 |  | 
 | static inline u32 _emit_KILL(unsigned dry_run, u8 buf[]) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMAKILL; | 
 |  | 
 | 	buf[0] = CMD_DMAKILL; | 
 |  | 
 | 	return SZ_DMAKILL; | 
 | } | 
 |  | 
 | static inline u32 _emit_MOV(unsigned dry_run, u8 buf[], | 
 | 		enum dmamov_dst dst, u32 val) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMAMOV; | 
 |  | 
 | 	buf[0] = CMD_DMAMOV; | 
 | 	buf[1] = dst; | 
 | 	*((u32 *)&buf[2]) = val; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n", | 
 | 		dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val); | 
 |  | 
 | 	return SZ_DMAMOV; | 
 | } | 
 |  | 
 | static inline u32 _emit_NOP(unsigned dry_run, u8 buf[]) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMANOP; | 
 |  | 
 | 	buf[0] = CMD_DMANOP; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n"); | 
 |  | 
 | 	return SZ_DMANOP; | 
 | } | 
 |  | 
 | static inline u32 _emit_RMB(unsigned dry_run, u8 buf[]) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMARMB; | 
 |  | 
 | 	buf[0] = CMD_DMARMB; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n"); | 
 |  | 
 | 	return SZ_DMARMB; | 
 | } | 
 |  | 
 | static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMASEV; | 
 |  | 
 | 	buf[0] = CMD_DMASEV; | 
 |  | 
 | 	ev &= 0x1f; | 
 | 	ev <<= 3; | 
 | 	buf[1] = ev; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3); | 
 |  | 
 | 	return SZ_DMASEV; | 
 | } | 
 |  | 
 | static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMAST; | 
 |  | 
 | 	buf[0] = CMD_DMAST; | 
 |  | 
 | 	if (cond == SINGLE) | 
 | 		buf[0] |= (0 << 1) | (1 << 0); | 
 | 	else if (cond == BURST) | 
 | 		buf[0] |= (1 << 1) | (1 << 0); | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n", | 
 | 		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); | 
 |  | 
 | 	return SZ_DMAST; | 
 | } | 
 |  | 
 | static inline u32 _emit_STP(unsigned dry_run, u8 buf[], | 
 | 		enum pl330_cond cond, u8 peri) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMASTP; | 
 |  | 
 | 	buf[0] = CMD_DMASTP; | 
 |  | 
 | 	if (cond == BURST) | 
 | 		buf[0] |= (1 << 1); | 
 |  | 
 | 	peri &= 0x1f; | 
 | 	peri <<= 3; | 
 | 	buf[1] = peri; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n", | 
 | 		cond == SINGLE ? 'S' : 'B', peri >> 3); | 
 |  | 
 | 	return SZ_DMASTP; | 
 | } | 
 |  | 
 | static inline u32 _emit_STZ(unsigned dry_run, u8 buf[]) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMASTZ; | 
 |  | 
 | 	buf[0] = CMD_DMASTZ; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n"); | 
 |  | 
 | 	return SZ_DMASTZ; | 
 | } | 
 |  | 
 | static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev, | 
 | 		unsigned invalidate) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMAWFE; | 
 |  | 
 | 	buf[0] = CMD_DMAWFE; | 
 |  | 
 | 	ev &= 0x1f; | 
 | 	ev <<= 3; | 
 | 	buf[1] = ev; | 
 |  | 
 | 	if (invalidate) | 
 | 		buf[1] |= (1 << 1); | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n", | 
 | 		ev >> 3, invalidate ? ", I" : ""); | 
 |  | 
 | 	return SZ_DMAWFE; | 
 | } | 
 |  | 
 | static inline u32 _emit_WFP(unsigned dry_run, u8 buf[], | 
 | 		enum pl330_cond cond, u8 peri) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMAWFP; | 
 |  | 
 | 	buf[0] = CMD_DMAWFP; | 
 |  | 
 | 	if (cond == SINGLE) | 
 | 		buf[0] |= (0 << 1) | (0 << 0); | 
 | 	else if (cond == BURST) | 
 | 		buf[0] |= (1 << 1) | (0 << 0); | 
 | 	else | 
 | 		buf[0] |= (0 << 1) | (1 << 0); | 
 |  | 
 | 	peri &= 0x1f; | 
 | 	peri <<= 3; | 
 | 	buf[1] = peri; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n", | 
 | 		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3); | 
 |  | 
 | 	return SZ_DMAWFP; | 
 | } | 
 |  | 
 | static inline u32 _emit_WMB(unsigned dry_run, u8 buf[]) | 
 | { | 
 | 	if (dry_run) | 
 | 		return SZ_DMAWMB; | 
 |  | 
 | 	buf[0] = CMD_DMAWMB; | 
 |  | 
 | 	PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n"); | 
 |  | 
 | 	return SZ_DMAWMB; | 
 | } | 
 |  | 
 | struct _arg_GO { | 
 | 	u8 chan; | 
 | 	u32 addr; | 
 | 	unsigned ns; | 
 | }; | 
 |  | 
 | static inline u32 _emit_GO(unsigned dry_run, u8 buf[], | 
 | 		const struct _arg_GO *arg) | 
 | { | 
 | 	u8 chan = arg->chan; | 
 | 	u32 addr = arg->addr; | 
 | 	unsigned ns = arg->ns; | 
 |  | 
 | 	if (dry_run) | 
 | 		return SZ_DMAGO; | 
 |  | 
 | 	buf[0] = CMD_DMAGO; | 
 | 	buf[0] |= (ns << 1); | 
 |  | 
 | 	buf[1] = chan & 0x7; | 
 |  | 
 | 	*((u32 *)&buf[2]) = addr; | 
 |  | 
 | 	return SZ_DMAGO; | 
 | } | 
 |  | 
 | #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) | 
 |  | 
 | /* Returns Time-Out */ | 
 | static bool _until_dmac_idle(struct pl330_thread *thrd) | 
 | { | 
 | 	void __iomem *regs = thrd->dmac->pinfo->base; | 
 | 	unsigned long loops = msecs_to_loops(5); | 
 |  | 
 | 	do { | 
 | 		/* Until Manager is Idle */ | 
 | 		if (!(readl(regs + DBGSTATUS) & DBG_BUSY)) | 
 | 			break; | 
 |  | 
 | 		cpu_relax(); | 
 | 	} while (--loops); | 
 |  | 
 | 	if (!loops) | 
 | 		return true; | 
 |  | 
 | 	return false; | 
 | } | 
 |  | 
 | static inline void _execute_DBGINSN(struct pl330_thread *thrd, | 
 | 		u8 insn[], bool as_manager) | 
 | { | 
 | 	void __iomem *regs = thrd->dmac->pinfo->base; | 
 | 	u32 val; | 
 |  | 
 | 	val = (insn[0] << 16) | (insn[1] << 24); | 
 | 	if (!as_manager) { | 
 | 		val |= (1 << 0); | 
 | 		val |= (thrd->id << 8); /* Channel Number */ | 
 | 	} | 
 | 	writel(val, regs + DBGINST0); | 
 |  | 
 | 	val = *((u32 *)&insn[2]); | 
 | 	writel(val, regs + DBGINST1); | 
 |  | 
 | 	/* If timed out due to halted state-machine */ | 
 | 	if (_until_dmac_idle(thrd)) { | 
 | 		dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Get going */ | 
 | 	writel(0, regs + DBGCMD); | 
 | } | 
 |  | 
 | static inline u32 _state(struct pl330_thread *thrd) | 
 | { | 
 | 	void __iomem *regs = thrd->dmac->pinfo->base; | 
 | 	u32 val; | 
 |  | 
 | 	if (is_manager(thrd)) | 
 | 		val = readl(regs + DS) & 0xf; | 
 | 	else | 
 | 		val = readl(regs + CS(thrd->id)) & 0xf; | 
 |  | 
 | 	switch (val) { | 
 | 	case DS_ST_STOP: | 
 | 		return PL330_STATE_STOPPED; | 
 | 	case DS_ST_EXEC: | 
 | 		return PL330_STATE_EXECUTING; | 
 | 	case DS_ST_CMISS: | 
 | 		return PL330_STATE_CACHEMISS; | 
 | 	case DS_ST_UPDTPC: | 
 | 		return PL330_STATE_UPDTPC; | 
 | 	case DS_ST_WFE: | 
 | 		return PL330_STATE_WFE; | 
 | 	case DS_ST_FAULT: | 
 | 		return PL330_STATE_FAULTING; | 
 | 	case DS_ST_ATBRR: | 
 | 		if (is_manager(thrd)) | 
 | 			return PL330_STATE_INVALID; | 
 | 		else | 
 | 			return PL330_STATE_ATBARRIER; | 
 | 	case DS_ST_QBUSY: | 
 | 		if (is_manager(thrd)) | 
 | 			return PL330_STATE_INVALID; | 
 | 		else | 
 | 			return PL330_STATE_QUEUEBUSY; | 
 | 	case DS_ST_WFP: | 
 | 		if (is_manager(thrd)) | 
 | 			return PL330_STATE_INVALID; | 
 | 		else | 
 | 			return PL330_STATE_WFP; | 
 | 	case DS_ST_KILL: | 
 | 		if (is_manager(thrd)) | 
 | 			return PL330_STATE_INVALID; | 
 | 		else | 
 | 			return PL330_STATE_KILLING; | 
 | 	case DS_ST_CMPLT: | 
 | 		if (is_manager(thrd)) | 
 | 			return PL330_STATE_INVALID; | 
 | 		else | 
 | 			return PL330_STATE_COMPLETING; | 
 | 	case DS_ST_FLTCMP: | 
 | 		if (is_manager(thrd)) | 
 | 			return PL330_STATE_INVALID; | 
 | 		else | 
 | 			return PL330_STATE_FAULT_COMPLETING; | 
 | 	default: | 
 | 		return PL330_STATE_INVALID; | 
 | 	} | 
 | } | 
 |  | 
 | /* If the request 'req' of thread 'thrd' is currently active */ | 
 | static inline bool _req_active(struct pl330_thread *thrd, | 
 | 		struct _pl330_req *req) | 
 | { | 
 | 	void __iomem *regs = thrd->dmac->pinfo->base; | 
 | 	u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id)); | 
 |  | 
 | 	if (IS_FREE(req)) | 
 | 		return false; | 
 |  | 
 | 	return (pc >= buf && pc <= buf + req->mc_len) ? true : false; | 
 | } | 
 |  | 
 | /* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */ | 
 | static inline unsigned _thrd_active(struct pl330_thread *thrd) | 
 | { | 
 | 	if (_req_active(thrd, &thrd->req[0])) | 
 | 		return 1; /* First req active */ | 
 |  | 
 | 	if (_req_active(thrd, &thrd->req[1])) | 
 | 		return 2; /* Second req active */ | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void _stop(struct pl330_thread *thrd) | 
 | { | 
 | 	void __iomem *regs = thrd->dmac->pinfo->base; | 
 | 	u8 insn[6] = {0, 0, 0, 0, 0, 0}; | 
 |  | 
 | 	if (_state(thrd) == PL330_STATE_FAULT_COMPLETING) | 
 | 		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); | 
 |  | 
 | 	/* Return if nothing needs to be done */ | 
 | 	if (_state(thrd) == PL330_STATE_COMPLETING | 
 | 		  || _state(thrd) == PL330_STATE_KILLING | 
 | 		  || _state(thrd) == PL330_STATE_STOPPED) | 
 | 		return; | 
 |  | 
 | 	_emit_KILL(0, insn); | 
 |  | 
 | 	/* Stop generating interrupts for SEV */ | 
 | 	writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN); | 
 |  | 
 | 	_execute_DBGINSN(thrd, insn, is_manager(thrd)); | 
 | } | 
 |  | 
 | /* Start doing req 'idx' of thread 'thrd' */ | 
 | static bool _trigger(struct pl330_thread *thrd) | 
 | { | 
 | 	void __iomem *regs = thrd->dmac->pinfo->base; | 
 | 	struct _pl330_req *req; | 
 | 	struct pl330_req *r; | 
 | 	struct _arg_GO go; | 
 | 	unsigned ns; | 
 | 	u8 insn[6] = {0, 0, 0, 0, 0, 0}; | 
 |  | 
 | 	/* Return if already ACTIVE */ | 
 | 	if (_state(thrd) != PL330_STATE_STOPPED) | 
 | 		return true; | 
 |  | 
 | 	if (!IS_FREE(&thrd->req[1 - thrd->lstenq])) | 
 | 		req = &thrd->req[1 - thrd->lstenq]; | 
 | 	else if (!IS_FREE(&thrd->req[thrd->lstenq])) | 
 | 		req = &thrd->req[thrd->lstenq]; | 
 | 	else | 
 | 		req = NULL; | 
 |  | 
 | 	/* Return if no request */ | 
 | 	if (!req || !req->r) | 
 | 		return true; | 
 |  | 
 | 	r = req->r; | 
 |  | 
 | 	if (r->cfg) | 
 | 		ns = r->cfg->nonsecure ? 1 : 0; | 
 | 	else if (readl(regs + CS(thrd->id)) & CS_CNS) | 
 | 		ns = 1; | 
 | 	else | 
 | 		ns = 0; | 
 |  | 
 | 	/* See 'Abort Sources' point-4 at Page 2-25 */ | 
 | 	if (_manager_ns(thrd) && !ns) | 
 | 		dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n", | 
 | 			__func__, __LINE__); | 
 |  | 
 | 	go.chan = thrd->id; | 
 | 	go.addr = req->mc_bus; | 
 | 	go.ns = ns; | 
 | 	_emit_GO(0, insn, &go); | 
 |  | 
 | 	/* Set to generate interrupts for SEV */ | 
 | 	writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN); | 
 |  | 
 | 	/* Only manager can execute GO */ | 
 | 	_execute_DBGINSN(thrd, insn, true); | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | static bool _start(struct pl330_thread *thrd) | 
 | { | 
 | 	switch (_state(thrd)) { | 
 | 	case PL330_STATE_FAULT_COMPLETING: | 
 | 		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); | 
 |  | 
 | 		if (_state(thrd) == PL330_STATE_KILLING) | 
 | 			UNTIL(thrd, PL330_STATE_STOPPED) | 
 |  | 
 | 	case PL330_STATE_FAULTING: | 
 | 		_stop(thrd); | 
 |  | 
 | 	case PL330_STATE_KILLING: | 
 | 	case PL330_STATE_COMPLETING: | 
 | 		UNTIL(thrd, PL330_STATE_STOPPED) | 
 |  | 
 | 	case PL330_STATE_STOPPED: | 
 | 		return _trigger(thrd); | 
 |  | 
 | 	case PL330_STATE_WFP: | 
 | 	case PL330_STATE_QUEUEBUSY: | 
 | 	case PL330_STATE_ATBARRIER: | 
 | 	case PL330_STATE_UPDTPC: | 
 | 	case PL330_STATE_CACHEMISS: | 
 | 	case PL330_STATE_EXECUTING: | 
 | 		return true; | 
 |  | 
 | 	case PL330_STATE_WFE: /* For RESUME, nothing yet */ | 
 | 	default: | 
 | 		return false; | 
 | 	} | 
 | } | 
 |  | 
 | static inline int _ldst_memtomem(unsigned dry_run, u8 buf[], | 
 | 		const struct _xfer_spec *pxs, int cyc) | 
 | { | 
 | 	int off = 0; | 
 |  | 
 | 	while (cyc--) { | 
 | 		off += _emit_LD(dry_run, &buf[off], ALWAYS); | 
 | 		off += _emit_RMB(dry_run, &buf[off]); | 
 | 		off += _emit_ST(dry_run, &buf[off], ALWAYS); | 
 | 		off += _emit_WMB(dry_run, &buf[off]); | 
 | 	} | 
 |  | 
 | 	return off; | 
 | } | 
 |  | 
 | static inline int _ldst_devtomem(unsigned dry_run, u8 buf[], | 
 | 		const struct _xfer_spec *pxs, int cyc) | 
 | { | 
 | 	int off = 0; | 
 |  | 
 | 	while (cyc--) { | 
 | 		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); | 
 | 		off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri); | 
 | 		off += _emit_ST(dry_run, &buf[off], ALWAYS); | 
 | 		off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); | 
 | 	} | 
 |  | 
 | 	return off; | 
 | } | 
 |  | 
 | static inline int _ldst_memtodev(unsigned dry_run, u8 buf[], | 
 | 		const struct _xfer_spec *pxs, int cyc) | 
 | { | 
 | 	int off = 0; | 
 |  | 
 | 	while (cyc--) { | 
 | 		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); | 
 | 		off += _emit_LD(dry_run, &buf[off], ALWAYS); | 
 | 		off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri); | 
 | 		off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); | 
 | 	} | 
 |  | 
 | 	return off; | 
 | } | 
 |  | 
 | static int _bursts(unsigned dry_run, u8 buf[], | 
 | 		const struct _xfer_spec *pxs, int cyc) | 
 | { | 
 | 	int off = 0; | 
 |  | 
 | 	switch (pxs->r->rqtype) { | 
 | 	case MEMTODEV: | 
 | 		off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc); | 
 | 		break; | 
 | 	case DEVTOMEM: | 
 | 		off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc); | 
 | 		break; | 
 | 	case MEMTOMEM: | 
 | 		off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc); | 
 | 		break; | 
 | 	default: | 
 | 		off += 0x40000000; /* Scare off the Client */ | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return off; | 
 | } | 
 |  | 
 | /* Returns bytes consumed and updates bursts */ | 
 | static inline int _loop(unsigned dry_run, u8 buf[], | 
 | 		unsigned long *bursts, const struct _xfer_spec *pxs) | 
 | { | 
 | 	int cyc, cycmax, szlp, szlpend, szbrst, off; | 
 | 	unsigned lcnt0, lcnt1, ljmp0, ljmp1; | 
 | 	struct _arg_LPEND lpend; | 
 |  | 
 | 	/* Max iterations possible in DMALP is 256 */ | 
 | 	if (*bursts >= 256*256) { | 
 | 		lcnt1 = 256; | 
 | 		lcnt0 = 256; | 
 | 		cyc = *bursts / lcnt1 / lcnt0; | 
 | 	} else if (*bursts > 256) { | 
 | 		lcnt1 = 256; | 
 | 		lcnt0 = *bursts / lcnt1; | 
 | 		cyc = 1; | 
 | 	} else { | 
 | 		lcnt1 = *bursts; | 
 | 		lcnt0 = 0; | 
 | 		cyc = 1; | 
 | 	} | 
 |  | 
 | 	szlp = _emit_LP(1, buf, 0, 0); | 
 | 	szbrst = _bursts(1, buf, pxs, 1); | 
 |  | 
 | 	lpend.cond = ALWAYS; | 
 | 	lpend.forever = false; | 
 | 	lpend.loop = 0; | 
 | 	lpend.bjump = 0; | 
 | 	szlpend = _emit_LPEND(1, buf, &lpend); | 
 |  | 
 | 	if (lcnt0) { | 
 | 		szlp *= 2; | 
 | 		szlpend *= 2; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Max bursts that we can unroll due to limit on the | 
 | 	 * size of backward jump that can be encoded in DMALPEND | 
 | 	 * which is 8-bits and hence 255 | 
 | 	 */ | 
 | 	cycmax = (255 - (szlp + szlpend)) / szbrst; | 
 |  | 
 | 	cyc = (cycmax < cyc) ? cycmax : cyc; | 
 |  | 
 | 	off = 0; | 
 |  | 
 | 	if (lcnt0) { | 
 | 		off += _emit_LP(dry_run, &buf[off], 0, lcnt0); | 
 | 		ljmp0 = off; | 
 | 	} | 
 |  | 
 | 	off += _emit_LP(dry_run, &buf[off], 1, lcnt1); | 
 | 	ljmp1 = off; | 
 |  | 
 | 	off += _bursts(dry_run, &buf[off], pxs, cyc); | 
 |  | 
 | 	lpend.cond = ALWAYS; | 
 | 	lpend.forever = false; | 
 | 	lpend.loop = 1; | 
 | 	lpend.bjump = off - ljmp1; | 
 | 	off += _emit_LPEND(dry_run, &buf[off], &lpend); | 
 |  | 
 | 	if (lcnt0) { | 
 | 		lpend.cond = ALWAYS; | 
 | 		lpend.forever = false; | 
 | 		lpend.loop = 0; | 
 | 		lpend.bjump = off - ljmp0; | 
 | 		off += _emit_LPEND(dry_run, &buf[off], &lpend); | 
 | 	} | 
 |  | 
 | 	*bursts = lcnt1 * cyc; | 
 | 	if (lcnt0) | 
 | 		*bursts *= lcnt0; | 
 |  | 
 | 	return off; | 
 | } | 
 |  | 
 | static inline int _setup_loops(unsigned dry_run, u8 buf[], | 
 | 		const struct _xfer_spec *pxs) | 
 | { | 
 | 	struct pl330_xfer *x = pxs->x; | 
 | 	u32 ccr = pxs->ccr; | 
 | 	unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr); | 
 | 	int off = 0; | 
 |  | 
 | 	while (bursts) { | 
 | 		c = bursts; | 
 | 		off += _loop(dry_run, &buf[off], &c, pxs); | 
 | 		bursts -= c; | 
 | 	} | 
 |  | 
 | 	return off; | 
 | } | 
 |  | 
 | static inline int _setup_xfer(unsigned dry_run, u8 buf[], | 
 | 		const struct _xfer_spec *pxs) | 
 | { | 
 | 	struct pl330_xfer *x = pxs->x; | 
 | 	int off = 0; | 
 |  | 
 | 	/* DMAMOV SAR, x->src_addr */ | 
 | 	off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr); | 
 | 	/* DMAMOV DAR, x->dst_addr */ | 
 | 	off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr); | 
 |  | 
 | 	/* Setup Loop(s) */ | 
 | 	off += _setup_loops(dry_run, &buf[off], pxs); | 
 |  | 
 | 	return off; | 
 | } | 
 |  | 
 | /* | 
 |  * A req is a sequence of one or more xfer units. | 
 |  * Returns the number of bytes taken to setup the MC for the req. | 
 |  */ | 
 | static int _setup_req(unsigned dry_run, struct pl330_thread *thrd, | 
 | 		unsigned index, struct _xfer_spec *pxs) | 
 | { | 
 | 	struct _pl330_req *req = &thrd->req[index]; | 
 | 	struct pl330_xfer *x; | 
 | 	u8 *buf = req->mc_cpu; | 
 | 	int off = 0; | 
 |  | 
 | 	PL330_DBGMC_START(req->mc_bus); | 
 |  | 
 | 	/* DMAMOV CCR, ccr */ | 
 | 	off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr); | 
 |  | 
 | 	x = pxs->r->x; | 
 | 	do { | 
 | 		/* Error if xfer length is not aligned at burst size */ | 
 | 		if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) | 
 | 			return -EINVAL; | 
 |  | 
 | 		pxs->x = x; | 
 | 		off += _setup_xfer(dry_run, &buf[off], pxs); | 
 |  | 
 | 		x = x->next; | 
 | 	} while (x); | 
 |  | 
 | 	/* DMASEV peripheral/event */ | 
 | 	off += _emit_SEV(dry_run, &buf[off], thrd->ev); | 
 | 	/* DMAEND */ | 
 | 	off += _emit_END(dry_run, &buf[off]); | 
 |  | 
 | 	return off; | 
 | } | 
 |  | 
 | static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) | 
 | { | 
 | 	u32 ccr = 0; | 
 |  | 
 | 	if (rqc->src_inc) | 
 | 		ccr |= CC_SRCINC; | 
 |  | 
 | 	if (rqc->dst_inc) | 
 | 		ccr |= CC_DSTINC; | 
 |  | 
 | 	/* We set same protection levels for Src and DST for now */ | 
 | 	if (rqc->privileged) | 
 | 		ccr |= CC_SRCPRI | CC_DSTPRI; | 
 | 	if (rqc->nonsecure) | 
 | 		ccr |= CC_SRCNS | CC_DSTNS; | 
 | 	if (rqc->insnaccess) | 
 | 		ccr |= CC_SRCIA | CC_DSTIA; | 
 |  | 
 | 	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT); | 
 | 	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT); | 
 |  | 
 | 	ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); | 
 | 	ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); | 
 |  | 
 | 	ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT); | 
 | 	ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT); | 
 |  | 
 | 	ccr |= (rqc->swap << CC_SWAP_SHFT); | 
 |  | 
 | 	return ccr; | 
 | } | 
 |  | 
 | static inline bool _is_valid(u32 ccr) | 
 | { | 
 | 	enum pl330_dstcachectrl dcctl; | 
 | 	enum pl330_srccachectrl scctl; | 
 |  | 
 | 	dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK; | 
 | 	scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK; | 
 |  | 
 | 	if (dcctl == DINVALID1 || dcctl == DINVALID2 | 
 | 			|| scctl == SINVALID1 || scctl == SINVALID2) | 
 | 		return false; | 
 | 	else | 
 | 		return true; | 
 | } | 
 |  | 
 | /* | 
 |  * Submit a list of xfers after which the client wants notification. | 
 |  * Client is not notified after each xfer unit, just once after all | 
 |  * xfer units are done or some error occurs. | 
 |  */ | 
 | int pl330_submit_req(void *ch_id, struct pl330_req *r) | 
 | { | 
 | 	struct pl330_thread *thrd = ch_id; | 
 | 	struct pl330_dmac *pl330; | 
 | 	struct pl330_info *pi; | 
 | 	struct _xfer_spec xs; | 
 | 	unsigned long flags; | 
 | 	void __iomem *regs; | 
 | 	unsigned idx; | 
 | 	u32 ccr; | 
 | 	int ret = 0; | 
 |  | 
 | 	/* No Req or Unacquired Channel or DMAC */ | 
 | 	if (!r || !thrd || thrd->free) | 
 | 		return -EINVAL; | 
 |  | 
 | 	pl330 = thrd->dmac; | 
 | 	pi = pl330->pinfo; | 
 | 	regs = pi->base; | 
 |  | 
 | 	if (pl330->state == DYING | 
 | 		|| pl330->dmac_tbd.reset_chan & (1 << thrd->id)) { | 
 | 		dev_info(thrd->dmac->pinfo->dev, "%s:%d\n", | 
 | 			__func__, __LINE__); | 
 | 		return -EAGAIN; | 
 | 	} | 
 |  | 
 | 	/* If request for non-existing peripheral */ | 
 | 	if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) { | 
 | 		dev_info(thrd->dmac->pinfo->dev, | 
 | 				"%s:%d Invalid peripheral(%u)!\n", | 
 | 				__func__, __LINE__, r->peri); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&pl330->lock, flags); | 
 |  | 
 | 	if (_queue_full(thrd)) { | 
 | 		ret = -EAGAIN; | 
 | 		goto xfer_exit; | 
 | 	} | 
 |  | 
 | 	/* Prefer Secure Channel */ | 
 | 	if (!_manager_ns(thrd)) | 
 | 		r->cfg->nonsecure = 0; | 
 | 	else | 
 | 		r->cfg->nonsecure = 1; | 
 |  | 
 | 	/* Use last settings, if not provided */ | 
 | 	if (r->cfg) | 
 | 		ccr = _prepare_ccr(r->cfg); | 
 | 	else | 
 | 		ccr = readl(regs + CC(thrd->id)); | 
 |  | 
 | 	/* If this req doesn't have valid xfer settings */ | 
 | 	if (!_is_valid(ccr)) { | 
 | 		ret = -EINVAL; | 
 | 		dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n", | 
 | 			__func__, __LINE__, ccr); | 
 | 		goto xfer_exit; | 
 | 	} | 
 |  | 
 | 	idx = IS_FREE(&thrd->req[0]) ? 0 : 1; | 
 |  | 
 | 	xs.ccr = ccr; | 
 | 	xs.r = r; | 
 |  | 
 | 	/* First dry run to check if req is acceptable */ | 
 | 	ret = _setup_req(1, thrd, idx, &xs); | 
 | 	if (ret < 0) | 
 | 		goto xfer_exit; | 
 |  | 
 | 	if (ret > pi->mcbufsz / 2) { | 
 | 		dev_info(thrd->dmac->pinfo->dev, | 
 | 			"%s:%d Trying increasing mcbufsz\n", | 
 | 				__func__, __LINE__); | 
 | 		ret = -ENOMEM; | 
 | 		goto xfer_exit; | 
 | 	} | 
 |  | 
 | 	/* Hook the request */ | 
 | 	thrd->lstenq = idx; | 
 | 	thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs); | 
 | 	thrd->req[idx].r = r; | 
 |  | 
 | 	ret = 0; | 
 |  | 
 | xfer_exit: | 
 | 	spin_unlock_irqrestore(&pl330->lock, flags); | 
 |  | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(pl330_submit_req); | 
 |  | 
 | static void pl330_dotask(unsigned long data) | 
 | { | 
 | 	struct pl330_dmac *pl330 = (struct pl330_dmac *) data; | 
 | 	struct pl330_info *pi = pl330->pinfo; | 
 | 	unsigned long flags; | 
 | 	int i; | 
 |  | 
 | 	spin_lock_irqsave(&pl330->lock, flags); | 
 |  | 
 | 	/* The DMAC itself gone nuts */ | 
 | 	if (pl330->dmac_tbd.reset_dmac) { | 
 | 		pl330->state = DYING; | 
 | 		/* Reset the manager too */ | 
 | 		pl330->dmac_tbd.reset_mngr = true; | 
 | 		/* Clear the reset flag */ | 
 | 		pl330->dmac_tbd.reset_dmac = false; | 
 | 	} | 
 |  | 
 | 	if (pl330->dmac_tbd.reset_mngr) { | 
 | 		_stop(pl330->manager); | 
 | 		/* Reset all channels */ | 
 | 		pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1; | 
 | 		/* Clear the reset flag */ | 
 | 		pl330->dmac_tbd.reset_mngr = false; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < pi->pcfg.num_chan; i++) { | 
 |  | 
 | 		if (pl330->dmac_tbd.reset_chan & (1 << i)) { | 
 | 			struct pl330_thread *thrd = &pl330->channels[i]; | 
 | 			void __iomem *regs = pi->base; | 
 | 			enum pl330_op_err err; | 
 |  | 
 | 			_stop(thrd); | 
 |  | 
 | 			if (readl(regs + FSC) & (1 << thrd->id)) | 
 | 				err = PL330_ERR_FAIL; | 
 | 			else | 
 | 				err = PL330_ERR_ABORT; | 
 |  | 
 | 			spin_unlock_irqrestore(&pl330->lock, flags); | 
 |  | 
 | 			_callback(thrd->req[1 - thrd->lstenq].r, err); | 
 | 			_callback(thrd->req[thrd->lstenq].r, err); | 
 |  | 
 | 			spin_lock_irqsave(&pl330->lock, flags); | 
 |  | 
 | 			thrd->req[0].r = NULL; | 
 | 			thrd->req[1].r = NULL; | 
 | 			MARK_FREE(&thrd->req[0]); | 
 | 			MARK_FREE(&thrd->req[1]); | 
 |  | 
 | 			/* Clear the reset flag */ | 
 | 			pl330->dmac_tbd.reset_chan &= ~(1 << i); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&pl330->lock, flags); | 
 |  | 
 | 	return; | 
 | } | 
 |  | 
 | /* Returns 1 if state was updated, 0 otherwise */ | 
 | int pl330_update(const struct pl330_info *pi) | 
 | { | 
 | 	struct _pl330_req *rqdone; | 
 | 	struct pl330_dmac *pl330; | 
 | 	unsigned long flags; | 
 | 	void __iomem *regs; | 
 | 	u32 val; | 
 | 	int id, ev, ret = 0; | 
 |  | 
 | 	if (!pi || !pi->pl330_data) | 
 | 		return 0; | 
 |  | 
 | 	regs = pi->base; | 
 | 	pl330 = pi->pl330_data; | 
 |  | 
 | 	spin_lock_irqsave(&pl330->lock, flags); | 
 |  | 
 | 	val = readl(regs + FSM) & 0x1; | 
 | 	if (val) | 
 | 		pl330->dmac_tbd.reset_mngr = true; | 
 | 	else | 
 | 		pl330->dmac_tbd.reset_mngr = false; | 
 |  | 
 | 	val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1); | 
 | 	pl330->dmac_tbd.reset_chan |= val; | 
 | 	if (val) { | 
 | 		int i = 0; | 
 | 		while (i < pi->pcfg.num_chan) { | 
 | 			if (val & (1 << i)) { | 
 | 				dev_info(pi->dev, | 
 | 					"Reset Channel-%d\t CS-%x FTC-%x\n", | 
 | 						i, readl(regs + CS(i)), | 
 | 						readl(regs + FTC(i))); | 
 | 				_stop(&pl330->channels[i]); | 
 | 			} | 
 | 			i++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Check which event happened i.e, thread notified */ | 
 | 	val = readl(regs + ES); | 
 | 	if (pi->pcfg.num_events < 32 | 
 | 			&& val & ~((1 << pi->pcfg.num_events) - 1)) { | 
 | 		pl330->dmac_tbd.reset_dmac = true; | 
 | 		dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__); | 
 | 		ret = 1; | 
 | 		goto updt_exit; | 
 | 	} | 
 |  | 
 | 	for (ev = 0; ev < pi->pcfg.num_events; ev++) { | 
 | 		if (val & (1 << ev)) { /* Event occurred */ | 
 | 			struct pl330_thread *thrd; | 
 | 			u32 inten = readl(regs + INTEN); | 
 | 			int active; | 
 |  | 
 | 			/* Clear the event */ | 
 | 			if (inten & (1 << ev)) | 
 | 				writel(1 << ev, regs + INTCLR); | 
 |  | 
 | 			ret = 1; | 
 |  | 
 | 			id = pl330->events[ev]; | 
 |  | 
 | 			thrd = &pl330->channels[id]; | 
 |  | 
 | 			active = _thrd_active(thrd); | 
 | 			if (!active) /* Aborted */ | 
 | 				continue; | 
 |  | 
 | 			active -= 1; | 
 |  | 
 | 			rqdone = &thrd->req[active]; | 
 | 			MARK_FREE(rqdone); | 
 |  | 
 | 			/* Get going again ASAP */ | 
 | 			_start(thrd); | 
 |  | 
 | 			/* For now, just make a list of callbacks to be done */ | 
 | 			list_add_tail(&rqdone->rqd, &pl330->req_done); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Now that we are in no hurry, do the callbacks */ | 
 | 	while (!list_empty(&pl330->req_done)) { | 
 | 		rqdone = container_of(pl330->req_done.next, | 
 | 					struct _pl330_req, rqd); | 
 |  | 
 | 		list_del_init(&rqdone->rqd); | 
 |  | 
 | 		spin_unlock_irqrestore(&pl330->lock, flags); | 
 | 		_callback(rqdone->r, PL330_ERR_NONE); | 
 | 		spin_lock_irqsave(&pl330->lock, flags); | 
 | 	} | 
 |  | 
 | updt_exit: | 
 | 	spin_unlock_irqrestore(&pl330->lock, flags); | 
 |  | 
 | 	if (pl330->dmac_tbd.reset_dmac | 
 | 			|| pl330->dmac_tbd.reset_mngr | 
 | 			|| pl330->dmac_tbd.reset_chan) { | 
 | 		ret = 1; | 
 | 		tasklet_schedule(&pl330->tasks); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(pl330_update); | 
 |  | 
 | int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) | 
 | { | 
 | 	struct pl330_thread *thrd = ch_id; | 
 | 	struct pl330_dmac *pl330; | 
 | 	unsigned long flags; | 
 | 	int ret = 0, active; | 
 |  | 
 | 	if (!thrd || thrd->free || thrd->dmac->state == DYING) | 
 | 		return -EINVAL; | 
 |  | 
 | 	pl330 = thrd->dmac; | 
 |  | 
 | 	spin_lock_irqsave(&pl330->lock, flags); | 
 |  | 
 | 	switch (op) { | 
 | 	case PL330_OP_FLUSH: | 
 | 		/* Make sure the channel is stopped */ | 
 | 		_stop(thrd); | 
 |  | 
 | 		thrd->req[0].r = NULL; | 
 | 		thrd->req[1].r = NULL; | 
 | 		MARK_FREE(&thrd->req[0]); | 
 | 		MARK_FREE(&thrd->req[1]); | 
 | 		break; | 
 |  | 
 | 	case PL330_OP_ABORT: | 
 | 		active = _thrd_active(thrd); | 
 |  | 
 | 		/* Make sure the channel is stopped */ | 
 | 		_stop(thrd); | 
 |  | 
 | 		/* ABORT is only for the active req */ | 
 | 		if (!active) | 
 | 			break; | 
 |  | 
 | 		active--; | 
 |  | 
 | 		thrd->req[active].r = NULL; | 
 | 		MARK_FREE(&thrd->req[active]); | 
 |  | 
 | 		/* Start the next */ | 
 | 	case PL330_OP_START: | 
 | 		if (!_start(thrd)) | 
 | 			ret = -EIO; | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		ret = -EINVAL; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&pl330->lock, flags); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(pl330_chan_ctrl); | 
 |  | 
 | int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus) | 
 | { | 
 | 	struct pl330_thread *thrd = ch_id; | 
 | 	struct pl330_dmac *pl330; | 
 | 	struct pl330_info *pi; | 
 | 	void __iomem *regs; | 
 | 	int active; | 
 | 	u32 val; | 
 |  | 
 | 	if (!pstatus || !thrd || thrd->free) | 
 | 		return -EINVAL; | 
 |  | 
 | 	pl330 = thrd->dmac; | 
 | 	pi = pl330->pinfo; | 
 | 	regs = pi->base; | 
 |  | 
 | 	/* The client should remove the DMAC and add again */ | 
 | 	if (pl330->state == DYING) | 
 | 		pstatus->dmac_halted = true; | 
 | 	else | 
 | 		pstatus->dmac_halted = false; | 
 |  | 
 | 	val = readl(regs + FSC); | 
 | 	if (val & (1 << thrd->id)) | 
 | 		pstatus->faulting = true; | 
 | 	else | 
 | 		pstatus->faulting = false; | 
 |  | 
 | 	active = _thrd_active(thrd); | 
 |  | 
 | 	if (!active) { | 
 | 		/* Indicate that the thread is not running */ | 
 | 		pstatus->top_req = NULL; | 
 | 		pstatus->wait_req = NULL; | 
 | 	} else { | 
 | 		active--; | 
 | 		pstatus->top_req = thrd->req[active].r; | 
 | 		pstatus->wait_req = !IS_FREE(&thrd->req[1 - active]) | 
 | 					? thrd->req[1 - active].r : NULL; | 
 | 	} | 
 |  | 
 | 	pstatus->src_addr = readl(regs + SA(thrd->id)); | 
 | 	pstatus->dst_addr = readl(regs + DA(thrd->id)); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(pl330_chan_status); | 
 |  | 
 | /* Reserve an event */ | 
 | static inline int _alloc_event(struct pl330_thread *thrd) | 
 | { | 
 | 	struct pl330_dmac *pl330 = thrd->dmac; | 
 | 	struct pl330_info *pi = pl330->pinfo; | 
 | 	int ev; | 
 |  | 
 | 	for (ev = 0; ev < pi->pcfg.num_events; ev++) | 
 | 		if (pl330->events[ev] == -1) { | 
 | 			pl330->events[ev] = thrd->id; | 
 | 			return ev; | 
 | 		} | 
 |  | 
 | 	return -1; | 
 | } | 
 |  | 
 | /* Upon success, returns IdentityToken for the | 
 |  * allocated channel, NULL otherwise. | 
 |  */ | 
 | void *pl330_request_channel(const struct pl330_info *pi) | 
 | { | 
 | 	struct pl330_thread *thrd = NULL; | 
 | 	struct pl330_dmac *pl330; | 
 | 	unsigned long flags; | 
 | 	int chans, i; | 
 |  | 
 | 	if (!pi || !pi->pl330_data) | 
 | 		return NULL; | 
 |  | 
 | 	pl330 = pi->pl330_data; | 
 |  | 
 | 	if (pl330->state == DYING) | 
 | 		return NULL; | 
 |  | 
 | 	chans = pi->pcfg.num_chan; | 
 |  | 
 | 	spin_lock_irqsave(&pl330->lock, flags); | 
 |  | 
 | 	for (i = 0; i < chans; i++) { | 
 | 		thrd = &pl330->channels[i]; | 
 | 		if (thrd->free) { | 
 | 			thrd->ev = _alloc_event(thrd); | 
 | 			if (thrd->ev >= 0) { | 
 | 				thrd->free = false; | 
 | 				thrd->lstenq = 1; | 
 | 				thrd->req[0].r = NULL; | 
 | 				MARK_FREE(&thrd->req[0]); | 
 | 				thrd->req[1].r = NULL; | 
 | 				MARK_FREE(&thrd->req[1]); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		thrd = NULL; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&pl330->lock, flags); | 
 |  | 
 | 	return thrd; | 
 | } | 
 | EXPORT_SYMBOL(pl330_request_channel); | 
 |  | 
 | /* Release an event */ | 
 | static inline void _free_event(struct pl330_thread *thrd, int ev) | 
 | { | 
 | 	struct pl330_dmac *pl330 = thrd->dmac; | 
 | 	struct pl330_info *pi = pl330->pinfo; | 
 |  | 
 | 	/* If the event is valid and was held by the thread */ | 
 | 	if (ev >= 0 && ev < pi->pcfg.num_events | 
 | 			&& pl330->events[ev] == thrd->id) | 
 | 		pl330->events[ev] = -1; | 
 | } | 
 |  | 
 | void pl330_release_channel(void *ch_id) | 
 | { | 
 | 	struct pl330_thread *thrd = ch_id; | 
 | 	struct pl330_dmac *pl330; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (!thrd || thrd->free) | 
 | 		return; | 
 |  | 
 | 	_stop(thrd); | 
 |  | 
 | 	_callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT); | 
 | 	_callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT); | 
 |  | 
 | 	pl330 = thrd->dmac; | 
 |  | 
 | 	spin_lock_irqsave(&pl330->lock, flags); | 
 | 	_free_event(thrd, thrd->ev); | 
 | 	thrd->free = true; | 
 | 	spin_unlock_irqrestore(&pl330->lock, flags); | 
 | } | 
 | EXPORT_SYMBOL(pl330_release_channel); | 
 |  | 
 | /* Initialize the structure for PL330 configuration, that can be used | 
 |  * by the client driver the make best use of the DMAC | 
 |  */ | 
 | static void read_dmac_config(struct pl330_info *pi) | 
 | { | 
 | 	void __iomem *regs = pi->base; | 
 | 	u32 val; | 
 |  | 
 | 	val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT; | 
 | 	val &= CRD_DATA_WIDTH_MASK; | 
 | 	pi->pcfg.data_bus_width = 8 * (1 << val); | 
 |  | 
 | 	val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT; | 
 | 	val &= CRD_DATA_BUFF_MASK; | 
 | 	pi->pcfg.data_buf_dep = val + 1; | 
 |  | 
 | 	val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT; | 
 | 	val &= CR0_NUM_CHANS_MASK; | 
 | 	val += 1; | 
 | 	pi->pcfg.num_chan = val; | 
 |  | 
 | 	val = readl(regs + CR0); | 
 | 	if (val & CR0_PERIPH_REQ_SET) { | 
 | 		val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK; | 
 | 		val += 1; | 
 | 		pi->pcfg.num_peri = val; | 
 | 		pi->pcfg.peri_ns = readl(regs + CR4); | 
 | 	} else { | 
 | 		pi->pcfg.num_peri = 0; | 
 | 	} | 
 |  | 
 | 	val = readl(regs + CR0); | 
 | 	if (val & CR0_BOOT_MAN_NS) | 
 | 		pi->pcfg.mode |= DMAC_MODE_NS; | 
 | 	else | 
 | 		pi->pcfg.mode &= ~DMAC_MODE_NS; | 
 |  | 
 | 	val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT; | 
 | 	val &= CR0_NUM_EVENTS_MASK; | 
 | 	val += 1; | 
 | 	pi->pcfg.num_events = val; | 
 |  | 
 | 	pi->pcfg.irq_ns = readl(regs + CR3); | 
 |  | 
 | 	pi->pcfg.periph_id = get_id(pi, PERIPH_ID); | 
 | 	pi->pcfg.pcell_id = get_id(pi, PCELL_ID); | 
 | } | 
 |  | 
 | static inline void _reset_thread(struct pl330_thread *thrd) | 
 | { | 
 | 	struct pl330_dmac *pl330 = thrd->dmac; | 
 | 	struct pl330_info *pi = pl330->pinfo; | 
 |  | 
 | 	thrd->req[0].mc_cpu = pl330->mcode_cpu | 
 | 				+ (thrd->id * pi->mcbufsz); | 
 | 	thrd->req[0].mc_bus = pl330->mcode_bus | 
 | 				+ (thrd->id * pi->mcbufsz); | 
 | 	thrd->req[0].r = NULL; | 
 | 	MARK_FREE(&thrd->req[0]); | 
 |  | 
 | 	thrd->req[1].mc_cpu = thrd->req[0].mc_cpu | 
 | 				+ pi->mcbufsz / 2; | 
 | 	thrd->req[1].mc_bus = thrd->req[0].mc_bus | 
 | 				+ pi->mcbufsz / 2; | 
 | 	thrd->req[1].r = NULL; | 
 | 	MARK_FREE(&thrd->req[1]); | 
 | } | 
 |  | 
 | static int dmac_alloc_threads(struct pl330_dmac *pl330) | 
 | { | 
 | 	struct pl330_info *pi = pl330->pinfo; | 
 | 	int chans = pi->pcfg.num_chan; | 
 | 	struct pl330_thread *thrd; | 
 | 	int i; | 
 |  | 
 | 	/* Allocate 1 Manager and 'chans' Channel threads */ | 
 | 	pl330->channels = kzalloc((1 + chans) * sizeof(*thrd), | 
 | 					GFP_KERNEL); | 
 | 	if (!pl330->channels) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* Init Channel threads */ | 
 | 	for (i = 0; i < chans; i++) { | 
 | 		thrd = &pl330->channels[i]; | 
 | 		thrd->id = i; | 
 | 		thrd->dmac = pl330; | 
 | 		_reset_thread(thrd); | 
 | 		thrd->free = true; | 
 | 	} | 
 |  | 
 | 	/* MANAGER is indexed at the end */ | 
 | 	thrd = &pl330->channels[chans]; | 
 | 	thrd->id = chans; | 
 | 	thrd->dmac = pl330; | 
 | 	thrd->free = false; | 
 | 	pl330->manager = thrd; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dmac_alloc_resources(struct pl330_dmac *pl330) | 
 | { | 
 | 	struct pl330_info *pi = pl330->pinfo; | 
 | 	int chans = pi->pcfg.num_chan; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * Alloc MicroCode buffer for 'chans' Channel threads. | 
 | 	 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN) | 
 | 	 */ | 
 | 	pl330->mcode_cpu = dma_alloc_coherent(pi->dev, | 
 | 				chans * pi->mcbufsz, | 
 | 				&pl330->mcode_bus, GFP_KERNEL); | 
 | 	if (!pl330->mcode_cpu) { | 
 | 		dev_err(pi->dev, "%s:%d Can't allocate memory!\n", | 
 | 			__func__, __LINE__); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	ret = dmac_alloc_threads(pl330); | 
 | 	if (ret) { | 
 | 		dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n", | 
 | 			__func__, __LINE__); | 
 | 		dma_free_coherent(pi->dev, | 
 | 				chans * pi->mcbufsz, | 
 | 				pl330->mcode_cpu, pl330->mcode_bus); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int pl330_add(struct pl330_info *pi) | 
 | { | 
 | 	struct pl330_dmac *pl330; | 
 | 	void __iomem *regs; | 
 | 	int i, ret; | 
 |  | 
 | 	if (!pi || !pi->dev) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* If already added */ | 
 | 	if (pi->pl330_data) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* | 
 | 	 * If the SoC can perform reset on the DMAC, then do it | 
 | 	 * before reading its configuration. | 
 | 	 */ | 
 | 	if (pi->dmac_reset) | 
 | 		pi->dmac_reset(pi); | 
 |  | 
 | 	regs = pi->base; | 
 |  | 
 | 	/* Check if we can handle this DMAC */ | 
 | 	if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL | 
 | 	   || get_id(pi, PCELL_ID) != PCELL_ID_VAL) { | 
 | 		dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n", | 
 | 			get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID)); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* Read the configuration of the DMAC */ | 
 | 	read_dmac_config(pi); | 
 |  | 
 | 	if (pi->pcfg.num_events == 0) { | 
 | 		dev_err(pi->dev, "%s:%d Can't work without events!\n", | 
 | 			__func__, __LINE__); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL); | 
 | 	if (!pl330) { | 
 | 		dev_err(pi->dev, "%s:%d Can't allocate memory!\n", | 
 | 			__func__, __LINE__); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	/* Assign the info structure and private data */ | 
 | 	pl330->pinfo = pi; | 
 | 	pi->pl330_data = pl330; | 
 |  | 
 | 	spin_lock_init(&pl330->lock); | 
 |  | 
 | 	INIT_LIST_HEAD(&pl330->req_done); | 
 |  | 
 | 	/* Use default MC buffer size if not provided */ | 
 | 	if (!pi->mcbufsz) | 
 | 		pi->mcbufsz = MCODE_BUFF_PER_REQ * 2; | 
 |  | 
 | 	/* Mark all events as free */ | 
 | 	for (i = 0; i < pi->pcfg.num_events; i++) | 
 | 		pl330->events[i] = -1; | 
 |  | 
 | 	/* Allocate resources needed by the DMAC */ | 
 | 	ret = dmac_alloc_resources(pl330); | 
 | 	if (ret) { | 
 | 		dev_err(pi->dev, "Unable to create channels for DMAC\n"); | 
 | 		kfree(pl330); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330); | 
 |  | 
 | 	pl330->state = INIT; | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(pl330_add); | 
 |  | 
 | static int dmac_free_threads(struct pl330_dmac *pl330) | 
 | { | 
 | 	struct pl330_info *pi = pl330->pinfo; | 
 | 	int chans = pi->pcfg.num_chan; | 
 | 	struct pl330_thread *thrd; | 
 | 	int i; | 
 |  | 
 | 	/* Release Channel threads */ | 
 | 	for (i = 0; i < chans; i++) { | 
 | 		thrd = &pl330->channels[i]; | 
 | 		pl330_release_channel((void *)thrd); | 
 | 	} | 
 |  | 
 | 	/* Free memory */ | 
 | 	kfree(pl330->channels); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void dmac_free_resources(struct pl330_dmac *pl330) | 
 | { | 
 | 	struct pl330_info *pi = pl330->pinfo; | 
 | 	int chans = pi->pcfg.num_chan; | 
 |  | 
 | 	dmac_free_threads(pl330); | 
 |  | 
 | 	dma_free_coherent(pi->dev, chans * pi->mcbufsz, | 
 | 				pl330->mcode_cpu, pl330->mcode_bus); | 
 | } | 
 |  | 
 | void pl330_del(struct pl330_info *pi) | 
 | { | 
 | 	struct pl330_dmac *pl330; | 
 |  | 
 | 	if (!pi || !pi->pl330_data) | 
 | 		return; | 
 |  | 
 | 	pl330 = pi->pl330_data; | 
 |  | 
 | 	pl330->state = UNINIT; | 
 |  | 
 | 	tasklet_kill(&pl330->tasks); | 
 |  | 
 | 	/* Free DMAC resources */ | 
 | 	dmac_free_resources(pl330); | 
 |  | 
 | 	kfree(pl330); | 
 | 	pi->pl330_data = NULL; | 
 | } | 
 | EXPORT_SYMBOL(pl330_del); |