|  | /* | 
|  | * linux/drivers/ide/pci/ns87415.c		Version 2.00  Sep. 10, 2002 | 
|  | * | 
|  | * Copyright (C) 1997-1998	Mark Lord <mlord@pobox.com> | 
|  | * Copyright (C) 1998		Eddie C. Dost <ecd@skynet.be> | 
|  | * Copyright (C) 1999-2000	Andre Hedrick <andre@linux-ide.org> | 
|  | * Copyright (C) 2004		Grant Grundler <grundler at parisc-linux.org> | 
|  | * | 
|  | * Inspired by an earlier effort from David S. Miller <davem@redhat.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/config.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/hdreg.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/ide.h> | 
|  | #include <linux/init.h> | 
|  |  | 
|  | #include <asm/io.h> | 
|  |  | 
|  | #ifdef CONFIG_SUPERIO | 
|  | /* SUPERIO 87560 is a PoS chip that NatSem denies exists. | 
|  | * Unfortunately, it's built-in on all Astro-based PA-RISC workstations | 
|  | * which use the integrated NS87514 cell for CD-ROM support. | 
|  | * i.e we have to support for CD-ROM installs. | 
|  | * See drivers/parisc/superio.c for more gory details. | 
|  | */ | 
|  | #include <asm/superio.h> | 
|  |  | 
|  | static unsigned long superio_ide_status[2]; | 
|  | static unsigned long superio_ide_select[2]; | 
|  | static unsigned long superio_ide_dma_status[2]; | 
|  |  | 
|  | #define SUPERIO_IDE_MAX_RETRIES 25 | 
|  |  | 
|  | /* Because of a defect in Super I/O, all reads of the PCI DMA status | 
|  | * registers, IDE status register and the IDE select register need to be | 
|  | * retried | 
|  | */ | 
|  | static u8 superio_ide_inb (unsigned long port) | 
|  | { | 
|  | if (port == superio_ide_status[0] || | 
|  | port == superio_ide_status[1] || | 
|  | port == superio_ide_select[0] || | 
|  | port == superio_ide_select[1] || | 
|  | port == superio_ide_dma_status[0] || | 
|  | port == superio_ide_dma_status[1]) { | 
|  | u8 tmp; | 
|  | int retries = SUPERIO_IDE_MAX_RETRIES; | 
|  |  | 
|  | /* printk(" [ reading port 0x%x with retry ] ", port); */ | 
|  |  | 
|  | do { | 
|  | tmp = inb(port); | 
|  | if (tmp == 0) | 
|  | udelay(50); | 
|  | } while (tmp == 0 && retries-- > 0); | 
|  |  | 
|  | return tmp; | 
|  | } | 
|  |  | 
|  | return inb(port); | 
|  | } | 
|  |  | 
|  | static void __devinit superio_ide_init_iops (struct hwif_s *hwif) | 
|  | { | 
|  | u32 base, dmabase; | 
|  | u8 tmp; | 
|  | struct pci_dev *pdev = hwif->pci_dev; | 
|  | u8 port = hwif->channel; | 
|  |  | 
|  | base = pci_resource_start(pdev, port * 2) & ~3; | 
|  | dmabase = pci_resource_start(pdev, 4) & ~3; | 
|  |  | 
|  | superio_ide_status[port] = base + IDE_STATUS_OFFSET; | 
|  | superio_ide_select[port] = base + IDE_SELECT_OFFSET; | 
|  | superio_ide_dma_status[port] = dmabase + (!port ? 2 : 0xa); | 
|  |  | 
|  | /* Clear error/interrupt, enable dma */ | 
|  | tmp = superio_ide_inb(superio_ide_dma_status[port]); | 
|  | outb(tmp | 0x66, superio_ide_dma_status[port]); | 
|  |  | 
|  | /* We need to override inb to workaround a SuperIO errata */ | 
|  | hwif->INB = superio_ide_inb; | 
|  | } | 
|  |  | 
|  | static void __devinit init_iops_ns87415(ide_hwif_t *hwif) | 
|  | { | 
|  | if (PCI_SLOT(hwif->pci_dev->devfn) == 0xE) { | 
|  | /* Built-in - assume it's under superio. */ | 
|  | superio_ide_init_iops(hwif); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 }; | 
|  |  | 
|  | /* | 
|  | * This routine either enables/disables (according to drive->present) | 
|  | * the IRQ associated with the port (HWIF(drive)), | 
|  | * and selects either PIO or DMA handshaking for the next I/O operation. | 
|  | */ | 
|  | static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma) | 
|  | { | 
|  | ide_hwif_t *hwif = HWIF(drive); | 
|  | unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data; | 
|  | struct pci_dev *dev = hwif->pci_dev; | 
|  | unsigned long flags; | 
|  |  | 
|  | local_irq_save(flags); | 
|  | new = *old; | 
|  |  | 
|  | /* Adjust IRQ enable bit */ | 
|  | bit = 1 << (8 + hwif->channel); | 
|  | new = drive->present ? (new & ~bit) : (new | bit); | 
|  |  | 
|  | /* Select PIO or DMA, DMA may only be selected for one drive/channel. */ | 
|  | bit   = 1 << (20 + drive->select.b.unit       + (hwif->channel << 1)); | 
|  | other = 1 << (20 + (1 - drive->select.b.unit) + (hwif->channel << 1)); | 
|  | new = use_dma ? ((new & ~other) | bit) : (new & ~bit); | 
|  |  | 
|  | if (new != *old) { | 
|  | unsigned char stat; | 
|  |  | 
|  | /* | 
|  | * Don't change DMA engine settings while Write Buffers | 
|  | * are busy. | 
|  | */ | 
|  | (void) pci_read_config_byte(dev, 0x43, &stat); | 
|  | while (stat & 0x03) { | 
|  | udelay(1); | 
|  | (void) pci_read_config_byte(dev, 0x43, &stat); | 
|  | } | 
|  |  | 
|  | *old = new; | 
|  | (void) pci_write_config_dword(dev, 0x40, new); | 
|  |  | 
|  | /* | 
|  | * And let things settle... | 
|  | */ | 
|  | udelay(10); | 
|  | } | 
|  |  | 
|  | local_irq_restore(flags); | 
|  | } | 
|  |  | 
|  | static void ns87415_selectproc (ide_drive_t *drive) | 
|  | { | 
|  | ns87415_prepare_drive (drive, drive->using_dma); | 
|  | } | 
|  |  | 
|  | static int ns87415_ide_dma_end (ide_drive_t *drive) | 
|  | { | 
|  | ide_hwif_t      *hwif = HWIF(drive); | 
|  | u8 dma_stat = 0, dma_cmd = 0; | 
|  |  | 
|  | drive->waiting_for_dma = 0; | 
|  | dma_stat = hwif->INB(hwif->dma_status); | 
|  | /* get dma command mode */ | 
|  | dma_cmd = hwif->INB(hwif->dma_command); | 
|  | /* stop DMA */ | 
|  | hwif->OUTB(dma_cmd & ~1, hwif->dma_command); | 
|  | /* from ERRATA: clear the INTR & ERROR bits */ | 
|  | dma_cmd = hwif->INB(hwif->dma_command); | 
|  | hwif->OUTB(dma_cmd|6, hwif->dma_command); | 
|  | /* and free any DMA resources */ | 
|  | ide_destroy_dmatable(drive); | 
|  | /* verify good DMA status */ | 
|  | return (dma_stat & 7) != 4; | 
|  | } | 
|  |  | 
|  | static int ns87415_ide_dma_setup(ide_drive_t *drive) | 
|  | { | 
|  | /* select DMA xfer */ | 
|  | ns87415_prepare_drive(drive, 1); | 
|  | if (!ide_dma_setup(drive)) | 
|  | return 0; | 
|  | /* DMA failed: select PIO xfer */ | 
|  | ns87415_prepare_drive(drive, 0); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int ns87415_ide_dma_check (ide_drive_t *drive) | 
|  | { | 
|  | if (drive->media != ide_disk) | 
|  | return HWIF(drive)->ide_dma_off_quietly(drive); | 
|  | return __ide_dma_check(drive); | 
|  | } | 
|  |  | 
|  | static void __init init_hwif_ns87415 (ide_hwif_t *hwif) | 
|  | { | 
|  | struct pci_dev *dev = hwif->pci_dev; | 
|  | unsigned int ctrl, using_inta; | 
|  | u8 progif; | 
|  | #ifdef __sparc_v9__ | 
|  | int timeout; | 
|  | u8 stat; | 
|  | #endif | 
|  |  | 
|  | hwif->autodma = 0; | 
|  | hwif->selectproc = &ns87415_selectproc; | 
|  |  | 
|  | /* | 
|  | * We cannot probe for IRQ: both ports share common IRQ on INTA. | 
|  | * Also, leave IRQ masked during drive probing, to prevent infinite | 
|  | * interrupts from a potentially floating INTA.. | 
|  | * | 
|  | * IRQs get unmasked in selectproc when drive is first used. | 
|  | */ | 
|  | (void) pci_read_config_dword(dev, 0x40, &ctrl); | 
|  | (void) pci_read_config_byte(dev, 0x09, &progif); | 
|  | /* is irq in "native" mode? */ | 
|  | using_inta = progif & (1 << (hwif->channel << 1)); | 
|  | if (!using_inta) | 
|  | using_inta = ctrl & (1 << (4 + hwif->channel)); | 
|  | if (hwif->mate) { | 
|  | hwif->select_data = hwif->mate->select_data; | 
|  | } else { | 
|  | hwif->select_data = (unsigned long) | 
|  | &ns87415_control[ns87415_count++]; | 
|  | ctrl |= (1 << 8) | (1 << 9);	/* mask both IRQs */ | 
|  | if (using_inta) | 
|  | ctrl &= ~(1 << 6);	/* unmask INTA */ | 
|  | *((unsigned int *)hwif->select_data) = ctrl; | 
|  | (void) pci_write_config_dword(dev, 0x40, ctrl); | 
|  |  | 
|  | /* | 
|  | * Set prefetch size to 512 bytes for both ports, | 
|  | * but don't turn on/off prefetching here. | 
|  | */ | 
|  | pci_write_config_byte(dev, 0x55, 0xee); | 
|  |  | 
|  | #ifdef __sparc_v9__ | 
|  | /* | 
|  | * XXX: Reset the device, if we don't it will not respond | 
|  | *      to SELECT_DRIVE() properly during first probe_hwif(). | 
|  | */ | 
|  | timeout = 10000; | 
|  | hwif->OUTB(12, hwif->io_ports[IDE_CONTROL_OFFSET]); | 
|  | udelay(10); | 
|  | hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); | 
|  | do { | 
|  | udelay(50); | 
|  | stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); | 
|  | if (stat == 0xff) | 
|  | break; | 
|  | } while ((stat & BUSY_STAT) && --timeout); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | if (!using_inta) | 
|  | hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET]); | 
|  | else if (!hwif->irq && hwif->mate && hwif->mate->irq) | 
|  | hwif->irq = hwif->mate->irq;	/* share IRQ with mate */ | 
|  |  | 
|  | if (!hwif->dma_base) | 
|  | return; | 
|  |  | 
|  | hwif->OUTB(0x60, hwif->dma_status); | 
|  | hwif->dma_setup = &ns87415_ide_dma_setup; | 
|  | hwif->ide_dma_check = &ns87415_ide_dma_check; | 
|  | hwif->ide_dma_end = &ns87415_ide_dma_end; | 
|  |  | 
|  | if (!noautodma) | 
|  | hwif->autodma = 1; | 
|  | hwif->drives[0].autodma = hwif->autodma; | 
|  | hwif->drives[1].autodma = hwif->autodma; | 
|  | } | 
|  |  | 
|  | static ide_pci_device_t ns87415_chipset __devinitdata = { | 
|  | .name		= "NS87415", | 
|  | #ifdef CONFIG_SUPERIO | 
|  | .init_iops	= init_iops_ns87415, | 
|  | #endif | 
|  | .init_hwif	= init_hwif_ns87415, | 
|  | .channels	= 2, | 
|  | .autodma	= AUTODMA, | 
|  | .bootable	= ON_BOARD, | 
|  | }; | 
|  |  | 
|  | static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id) | 
|  | { | 
|  | return ide_setup_pci_device(dev, &ns87415_chipset); | 
|  | } | 
|  |  | 
|  | static struct pci_device_id ns87415_pci_tbl[] = { | 
|  | { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | 
|  | { 0, }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl); | 
|  |  | 
|  | static struct pci_driver driver = { | 
|  | .name		= "NS87415_IDE", | 
|  | .id_table	= ns87415_pci_tbl, | 
|  | .probe		= ns87415_init_one, | 
|  | }; | 
|  |  | 
|  | static int ns87415_ide_init(void) | 
|  | { | 
|  | return ide_pci_register_driver(&driver); | 
|  | } | 
|  |  | 
|  | module_init(ns87415_ide_init); | 
|  |  | 
|  | MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick"); | 
|  | MODULE_DESCRIPTION("PCI driver module for NS87415 IDE"); | 
|  | MODULE_LICENSE("GPL"); |