|  | /* | 
|  | * V4L2 Driver for i.MXL/i.MXL camera (CSI) host | 
|  | * | 
|  | * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt> | 
|  | * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com> | 
|  | * | 
|  | * Based on PXA SoC camera driver | 
|  | * Copyright (C) 2006, Sascha Hauer, Pengutronix | 
|  | * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/time.h> | 
|  | #include <linux/version.h> | 
|  | #include <linux/videodev2.h> | 
|  |  | 
|  | #include <media/soc_camera.h> | 
|  | #include <media/v4l2-common.h> | 
|  | #include <media/v4l2-dev.h> | 
|  | #include <media/videobuf-dma-contig.h> | 
|  | #include <media/soc_mediabus.h> | 
|  |  | 
|  | #include <asm/dma.h> | 
|  | #include <asm/fiq.h> | 
|  | #include <mach/dma-mx1-mx2.h> | 
|  | #include <mach/hardware.h> | 
|  | #include <mach/mx1_camera.h> | 
|  |  | 
|  | /* | 
|  | * CSI registers | 
|  | */ | 
|  | #define CSICR1		0x00			/* CSI Control Register 1 */ | 
|  | #define CSISR		0x08			/* CSI Status Register */ | 
|  | #define CSIRXR		0x10			/* CSI RxFIFO Register */ | 
|  |  | 
|  | #define CSICR1_RXFF_LEVEL(x)	(((x) & 0x3) << 19) | 
|  | #define CSICR1_SOF_POL		(1 << 17) | 
|  | #define CSICR1_SOF_INTEN	(1 << 16) | 
|  | #define CSICR1_MCLKDIV(x)	(((x) & 0xf) << 12) | 
|  | #define CSICR1_MCLKEN		(1 << 9) | 
|  | #define CSICR1_FCC		(1 << 8) | 
|  | #define CSICR1_BIG_ENDIAN	(1 << 7) | 
|  | #define CSICR1_CLR_RXFIFO	(1 << 5) | 
|  | #define CSICR1_GCLK_MODE	(1 << 4) | 
|  | #define CSICR1_DATA_POL		(1 << 2) | 
|  | #define CSICR1_REDGE		(1 << 1) | 
|  | #define CSICR1_EN		(1 << 0) | 
|  |  | 
|  | #define CSISR_SFF_OR_INT	(1 << 25) | 
|  | #define CSISR_RFF_OR_INT	(1 << 24) | 
|  | #define CSISR_STATFF_INT	(1 << 21) | 
|  | #define CSISR_RXFF_INT		(1 << 18) | 
|  | #define CSISR_SOF_INT		(1 << 16) | 
|  | #define CSISR_DRDY		(1 << 0) | 
|  |  | 
|  | #define VERSION_CODE KERNEL_VERSION(0, 0, 1) | 
|  | #define DRIVER_NAME "mx1-camera" | 
|  |  | 
|  | #define CSI_IRQ_MASK	(CSISR_SFF_OR_INT | CSISR_RFF_OR_INT | \ | 
|  | CSISR_STATFF_INT | CSISR_RXFF_INT | CSISR_SOF_INT) | 
|  |  | 
|  | #define CSI_BUS_FLAGS	(SOCAM_MASTER | SOCAM_HSYNC_ACTIVE_HIGH | \ | 
|  | SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW | \ | 
|  | SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | \ | 
|  | SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_LOW | \ | 
|  | SOCAM_DATAWIDTH_8) | 
|  |  | 
|  | #define MAX_VIDEO_MEM 16	/* Video memory limit in megabytes */ | 
|  |  | 
|  | /* | 
|  | * Structures | 
|  | */ | 
|  |  | 
|  | /* buffer for one video frame */ | 
|  | struct mx1_buffer { | 
|  | /* common v4l buffer stuff -- must be first */ | 
|  | struct videobuf_buffer		vb; | 
|  | enum v4l2_mbus_pixelcode	code; | 
|  | int				inwork; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * i.MX1/i.MXL is only supposed to handle one camera on its Camera Sensor | 
|  | * Interface. If anyone ever builds hardware to enable more than | 
|  | * one camera, they will have to modify this driver too | 
|  | */ | 
|  | struct mx1_camera_dev { | 
|  | struct soc_camera_host		soc_host; | 
|  | struct soc_camera_device	*icd; | 
|  | struct mx1_camera_pdata		*pdata; | 
|  | struct mx1_buffer		*active; | 
|  | struct resource			*res; | 
|  | struct clk			*clk; | 
|  | struct list_head		capture; | 
|  |  | 
|  | void __iomem			*base; | 
|  | int				dma_chan; | 
|  | unsigned int			irq; | 
|  | unsigned long			mclk; | 
|  |  | 
|  | spinlock_t			lock; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *  Videobuf operations | 
|  | */ | 
|  | static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, | 
|  | unsigned int *size) | 
|  | { | 
|  | struct soc_camera_device *icd = vq->priv_data; | 
|  | int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, | 
|  | icd->current_fmt->host_fmt); | 
|  |  | 
|  | if (bytes_per_line < 0) | 
|  | return bytes_per_line; | 
|  |  | 
|  | *size = bytes_per_line * icd->user_height; | 
|  |  | 
|  | if (!*count) | 
|  | *count = 32; | 
|  |  | 
|  | if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024) | 
|  | *count = (MAX_VIDEO_MEM * 1024 * 1024) / *size; | 
|  |  | 
|  | dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void free_buffer(struct videobuf_queue *vq, struct mx1_buffer *buf) | 
|  | { | 
|  | struct soc_camera_device *icd = vq->priv_data; | 
|  | struct videobuf_buffer *vb = &buf->vb; | 
|  |  | 
|  | BUG_ON(in_interrupt()); | 
|  |  | 
|  | dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, | 
|  | vb, vb->baddr, vb->bsize); | 
|  |  | 
|  | /* | 
|  | * This waits until this buffer is out of danger, i.e., until it is no | 
|  | * longer in STATE_QUEUED or STATE_ACTIVE | 
|  | */ | 
|  | videobuf_waiton(vq, vb, 0, 0); | 
|  | videobuf_dma_contig_free(vq, vb); | 
|  |  | 
|  | vb->state = VIDEOBUF_NEEDS_INIT; | 
|  | } | 
|  |  | 
|  | static int mx1_videobuf_prepare(struct videobuf_queue *vq, | 
|  | struct videobuf_buffer *vb, enum v4l2_field field) | 
|  | { | 
|  | struct soc_camera_device *icd = vq->priv_data; | 
|  | struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb); | 
|  | int ret; | 
|  | int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, | 
|  | icd->current_fmt->host_fmt); | 
|  |  | 
|  | if (bytes_per_line < 0) | 
|  | return bytes_per_line; | 
|  |  | 
|  | dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, | 
|  | vb, vb->baddr, vb->bsize); | 
|  |  | 
|  | /* Added list head initialization on alloc */ | 
|  | WARN_ON(!list_empty(&vb->queue)); | 
|  |  | 
|  | BUG_ON(NULL == icd->current_fmt); | 
|  |  | 
|  | /* | 
|  | * I think, in buf_prepare you only have to protect global data, | 
|  | * the actual buffer is yours | 
|  | */ | 
|  | buf->inwork = 1; | 
|  |  | 
|  | if (buf->code	!= icd->current_fmt->code || | 
|  | vb->width	!= icd->user_width || | 
|  | vb->height	!= icd->user_height || | 
|  | vb->field	!= field) { | 
|  | buf->code	= icd->current_fmt->code; | 
|  | vb->width	= icd->user_width; | 
|  | vb->height	= icd->user_height; | 
|  | vb->field	= field; | 
|  | vb->state	= VIDEOBUF_NEEDS_INIT; | 
|  | } | 
|  |  | 
|  | vb->size = bytes_per_line * vb->height; | 
|  | if (0 != vb->baddr && vb->bsize < vb->size) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (vb->state == VIDEOBUF_NEEDS_INIT) { | 
|  | ret = videobuf_iolock(vq, vb, NULL); | 
|  | if (ret) | 
|  | goto fail; | 
|  |  | 
|  | vb->state = VIDEOBUF_PREPARED; | 
|  | } | 
|  |  | 
|  | buf->inwork = 0; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | free_buffer(vq, buf); | 
|  | out: | 
|  | buf->inwork = 0; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev) | 
|  | { | 
|  | struct videobuf_buffer *vbuf = &pcdev->active->vb; | 
|  | struct device *dev = pcdev->icd->dev.parent; | 
|  | int ret; | 
|  |  | 
|  | if (unlikely(!pcdev->active)) { | 
|  | dev_err(dev, "DMA End IRQ with no active buffer\n"); | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | /* setup sg list for future DMA */ | 
|  | ret = imx_dma_setup_single(pcdev->dma_chan, | 
|  | videobuf_to_dma_contig(vbuf), | 
|  | vbuf->size, pcdev->res->start + | 
|  | CSIRXR, DMA_MODE_READ); | 
|  | if (unlikely(ret)) | 
|  | dev_err(dev, "Failed to setup DMA sg list\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Called under spinlock_irqsave(&pcdev->lock, ...) */ | 
|  | static void mx1_videobuf_queue(struct videobuf_queue *vq, | 
|  | struct videobuf_buffer *vb) | 
|  | { | 
|  | struct soc_camera_device *icd = vq->priv_data; | 
|  | struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); | 
|  | struct mx1_camera_dev *pcdev = ici->priv; | 
|  | struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb); | 
|  |  | 
|  | dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, | 
|  | vb, vb->baddr, vb->bsize); | 
|  |  | 
|  | list_add_tail(&vb->queue, &pcdev->capture); | 
|  |  | 
|  | vb->state = VIDEOBUF_ACTIVE; | 
|  |  | 
|  | if (!pcdev->active) { | 
|  | pcdev->active = buf; | 
|  |  | 
|  | /* setup sg list for future DMA */ | 
|  | if (!mx1_camera_setup_dma(pcdev)) { | 
|  | unsigned int temp; | 
|  | /* enable SOF irq */ | 
|  | temp = __raw_readl(pcdev->base + CSICR1) | | 
|  | CSICR1_SOF_INTEN; | 
|  | __raw_writel(temp, pcdev->base + CSICR1); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void mx1_videobuf_release(struct videobuf_queue *vq, | 
|  | struct videobuf_buffer *vb) | 
|  | { | 
|  | struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb); | 
|  | #ifdef DEBUG | 
|  | struct soc_camera_device *icd = vq->priv_data; | 
|  | struct device *dev = icd->dev.parent; | 
|  |  | 
|  | dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, | 
|  | vb, vb->baddr, vb->bsize); | 
|  |  | 
|  | switch (vb->state) { | 
|  | case VIDEOBUF_ACTIVE: | 
|  | dev_dbg(dev, "%s (active)\n", __func__); | 
|  | break; | 
|  | case VIDEOBUF_QUEUED: | 
|  | dev_dbg(dev, "%s (queued)\n", __func__); | 
|  | break; | 
|  | case VIDEOBUF_PREPARED: | 
|  | dev_dbg(dev, "%s (prepared)\n", __func__); | 
|  | break; | 
|  | default: | 
|  | dev_dbg(dev, "%s (unknown)\n", __func__); | 
|  | break; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | free_buffer(vq, buf); | 
|  | } | 
|  |  | 
|  | static void mx1_camera_wakeup(struct mx1_camera_dev *pcdev, | 
|  | struct videobuf_buffer *vb, | 
|  | struct mx1_buffer *buf) | 
|  | { | 
|  | /* _init is used to debug races, see comment in mx1_camera_reqbufs() */ | 
|  | list_del_init(&vb->queue); | 
|  | vb->state = VIDEOBUF_DONE; | 
|  | do_gettimeofday(&vb->ts); | 
|  | vb->field_count++; | 
|  | wake_up(&vb->done); | 
|  |  | 
|  | if (list_empty(&pcdev->capture)) { | 
|  | pcdev->active = NULL; | 
|  | return; | 
|  | } | 
|  |  | 
|  | pcdev->active = list_entry(pcdev->capture.next, | 
|  | struct mx1_buffer, vb.queue); | 
|  |  | 
|  | /* setup sg list for future DMA */ | 
|  | if (likely(!mx1_camera_setup_dma(pcdev))) { | 
|  | unsigned int temp; | 
|  |  | 
|  | /* enable SOF irq */ | 
|  | temp = __raw_readl(pcdev->base + CSICR1) | CSICR1_SOF_INTEN; | 
|  | __raw_writel(temp, pcdev->base + CSICR1); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void mx1_camera_dma_irq(int channel, void *data) | 
|  | { | 
|  | struct mx1_camera_dev *pcdev = data; | 
|  | struct device *dev = pcdev->icd->dev.parent; | 
|  | struct mx1_buffer *buf; | 
|  | struct videobuf_buffer *vb; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&pcdev->lock, flags); | 
|  |  | 
|  | imx_dma_disable(channel); | 
|  |  | 
|  | if (unlikely(!pcdev->active)) { | 
|  | dev_err(dev, "DMA End IRQ with no active buffer\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | vb = &pcdev->active->vb; | 
|  | buf = container_of(vb, struct mx1_buffer, vb); | 
|  | WARN_ON(buf->inwork || list_empty(&vb->queue)); | 
|  | dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, | 
|  | vb, vb->baddr, vb->bsize); | 
|  |  | 
|  | mx1_camera_wakeup(pcdev, vb, buf); | 
|  | out: | 
|  | spin_unlock_irqrestore(&pcdev->lock, flags); | 
|  | } | 
|  |  | 
|  | static struct videobuf_queue_ops mx1_videobuf_ops = { | 
|  | .buf_setup	= mx1_videobuf_setup, | 
|  | .buf_prepare	= mx1_videobuf_prepare, | 
|  | .buf_queue	= mx1_videobuf_queue, | 
|  | .buf_release	= mx1_videobuf_release, | 
|  | }; | 
|  |  | 
|  | static void mx1_camera_init_videobuf(struct videobuf_queue *q, | 
|  | struct soc_camera_device *icd) | 
|  | { | 
|  | struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); | 
|  | struct mx1_camera_dev *pcdev = ici->priv; | 
|  |  | 
|  | videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, icd->dev.parent, | 
|  | &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, | 
|  | V4L2_FIELD_NONE, | 
|  | sizeof(struct mx1_buffer), icd, &icd->video_lock); | 
|  | } | 
|  |  | 
|  | static int mclk_get_divisor(struct mx1_camera_dev *pcdev) | 
|  | { | 
|  | unsigned int mclk = pcdev->mclk; | 
|  | unsigned long div; | 
|  | unsigned long lcdclk; | 
|  |  | 
|  | lcdclk = clk_get_rate(pcdev->clk); | 
|  |  | 
|  | /* | 
|  | * We verify platform_mclk_10khz != 0, so if anyone breaks it, here | 
|  | * they get a nice Oops | 
|  | */ | 
|  | div = (lcdclk + 2 * mclk - 1) / (2 * mclk) - 1; | 
|  |  | 
|  | dev_dbg(pcdev->icd->dev.parent, | 
|  | "System clock %lukHz, target freq %dkHz, divisor %lu\n", | 
|  | lcdclk / 1000, mclk / 1000, div); | 
|  |  | 
|  | return div; | 
|  | } | 
|  |  | 
|  | static void mx1_camera_activate(struct mx1_camera_dev *pcdev) | 
|  | { | 
|  | unsigned int csicr1 = CSICR1_EN; | 
|  |  | 
|  | dev_dbg(pcdev->icd->dev.parent, "Activate device\n"); | 
|  |  | 
|  | clk_enable(pcdev->clk); | 
|  |  | 
|  | /* enable CSI before doing anything else */ | 
|  | __raw_writel(csicr1, pcdev->base + CSICR1); | 
|  |  | 
|  | csicr1 |= CSICR1_MCLKEN | CSICR1_FCC | CSICR1_GCLK_MODE; | 
|  | csicr1 |= CSICR1_MCLKDIV(mclk_get_divisor(pcdev)); | 
|  | csicr1 |= CSICR1_RXFF_LEVEL(2); /* 16 words */ | 
|  |  | 
|  | __raw_writel(csicr1, pcdev->base + CSICR1); | 
|  | } | 
|  |  | 
|  | static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev) | 
|  | { | 
|  | dev_dbg(pcdev->icd->dev.parent, "Deactivate device\n"); | 
|  |  | 
|  | /* Disable all CSI interface */ | 
|  | __raw_writel(0x00, pcdev->base + CSICR1); | 
|  |  | 
|  | clk_disable(pcdev->clk); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The following two functions absolutely depend on the fact, that | 
|  | * there can be only one camera on i.MX1/i.MXL camera sensor interface | 
|  | */ | 
|  | static int mx1_camera_add_device(struct soc_camera_device *icd) | 
|  | { | 
|  | struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); | 
|  | struct mx1_camera_dev *pcdev = ici->priv; | 
|  |  | 
|  | if (pcdev->icd) | 
|  | return -EBUSY; | 
|  |  | 
|  | dev_info(icd->dev.parent, "MX1 Camera driver attached to camera %d\n", | 
|  | icd->devnum); | 
|  |  | 
|  | mx1_camera_activate(pcdev); | 
|  |  | 
|  | pcdev->icd = icd; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mx1_camera_remove_device(struct soc_camera_device *icd) | 
|  | { | 
|  | struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); | 
|  | struct mx1_camera_dev *pcdev = ici->priv; | 
|  | unsigned int csicr1; | 
|  |  | 
|  | BUG_ON(icd != pcdev->icd); | 
|  |  | 
|  | /* disable interrupts */ | 
|  | csicr1 = __raw_readl(pcdev->base + CSICR1) & ~CSI_IRQ_MASK; | 
|  | __raw_writel(csicr1, pcdev->base + CSICR1); | 
|  |  | 
|  | /* Stop DMA engine */ | 
|  | imx_dma_disable(pcdev->dma_chan); | 
|  |  | 
|  | dev_info(icd->dev.parent, "MX1 Camera driver detached from camera %d\n", | 
|  | icd->devnum); | 
|  |  | 
|  | mx1_camera_deactivate(pcdev); | 
|  |  | 
|  | pcdev->icd = NULL; | 
|  | } | 
|  |  | 
|  | static int mx1_camera_set_crop(struct soc_camera_device *icd, | 
|  | struct v4l2_crop *a) | 
|  | { | 
|  | struct v4l2_subdev *sd = soc_camera_to_subdev(icd); | 
|  |  | 
|  | return v4l2_subdev_call(sd, video, s_crop, a); | 
|  | } | 
|  |  | 
|  | static int mx1_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) | 
|  | { | 
|  | struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); | 
|  | struct mx1_camera_dev *pcdev = ici->priv; | 
|  | unsigned long camera_flags, common_flags; | 
|  | unsigned int csicr1; | 
|  | int ret; | 
|  |  | 
|  | camera_flags = icd->ops->query_bus_param(icd); | 
|  |  | 
|  | /* MX1 supports only 8bit buswidth */ | 
|  | common_flags = soc_camera_bus_param_compatible(camera_flags, | 
|  | CSI_BUS_FLAGS); | 
|  | if (!common_flags) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Make choises, based on platform choice */ | 
|  | if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) && | 
|  | (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) { | 
|  | if (!pcdev->pdata || | 
|  | pcdev->pdata->flags & MX1_CAMERA_VSYNC_HIGH) | 
|  | common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW; | 
|  | else | 
|  | common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH; | 
|  | } | 
|  |  | 
|  | if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) && | 
|  | (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) { | 
|  | if (!pcdev->pdata || | 
|  | pcdev->pdata->flags & MX1_CAMERA_PCLK_RISING) | 
|  | common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING; | 
|  | else | 
|  | common_flags &= ~SOCAM_PCLK_SAMPLE_RISING; | 
|  | } | 
|  |  | 
|  | if ((common_flags & SOCAM_DATA_ACTIVE_HIGH) && | 
|  | (common_flags & SOCAM_DATA_ACTIVE_LOW)) { | 
|  | if (!pcdev->pdata || | 
|  | pcdev->pdata->flags & MX1_CAMERA_DATA_HIGH) | 
|  | common_flags &= ~SOCAM_DATA_ACTIVE_LOW; | 
|  | else | 
|  | common_flags &= ~SOCAM_DATA_ACTIVE_HIGH; | 
|  | } | 
|  |  | 
|  | ret = icd->ops->set_bus_param(icd, common_flags); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | csicr1 = __raw_readl(pcdev->base + CSICR1); | 
|  |  | 
|  | if (common_flags & SOCAM_PCLK_SAMPLE_RISING) | 
|  | csicr1 |= CSICR1_REDGE; | 
|  | if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH) | 
|  | csicr1 |= CSICR1_SOF_POL; | 
|  | if (common_flags & SOCAM_DATA_ACTIVE_LOW) | 
|  | csicr1 |= CSICR1_DATA_POL; | 
|  |  | 
|  | __raw_writel(csicr1, pcdev->base + CSICR1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mx1_camera_set_fmt(struct soc_camera_device *icd, | 
|  | struct v4l2_format *f) | 
|  | { | 
|  | struct v4l2_subdev *sd = soc_camera_to_subdev(icd); | 
|  | const struct soc_camera_format_xlate *xlate; | 
|  | struct v4l2_pix_format *pix = &f->fmt.pix; | 
|  | struct v4l2_mbus_framefmt mf; | 
|  | int ret, buswidth; | 
|  |  | 
|  | xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); | 
|  | if (!xlate) { | 
|  | dev_warn(icd->dev.parent, "Format %x not found\n", | 
|  | pix->pixelformat); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | buswidth = xlate->host_fmt->bits_per_sample; | 
|  | if (buswidth > 8) { | 
|  | dev_warn(icd->dev.parent, | 
|  | "bits-per-sample %d for format %x unsupported\n", | 
|  | buswidth, pix->pixelformat); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | mf.width	= pix->width; | 
|  | mf.height	= pix->height; | 
|  | mf.field	= pix->field; | 
|  | mf.colorspace	= pix->colorspace; | 
|  | mf.code		= xlate->code; | 
|  |  | 
|  | ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | if (mf.code != xlate->code) | 
|  | return -EINVAL; | 
|  |  | 
|  | pix->width		= mf.width; | 
|  | pix->height		= mf.height; | 
|  | pix->field		= mf.field; | 
|  | pix->colorspace		= mf.colorspace; | 
|  | icd->current_fmt	= xlate; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int mx1_camera_try_fmt(struct soc_camera_device *icd, | 
|  | struct v4l2_format *f) | 
|  | { | 
|  | struct v4l2_subdev *sd = soc_camera_to_subdev(icd); | 
|  | const struct soc_camera_format_xlate *xlate; | 
|  | struct v4l2_pix_format *pix = &f->fmt.pix; | 
|  | struct v4l2_mbus_framefmt mf; | 
|  | int ret; | 
|  | /* TODO: limit to mx1 hardware capabilities */ | 
|  |  | 
|  | xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); | 
|  | if (!xlate) { | 
|  | dev_warn(icd->dev.parent, "Format %x not found\n", | 
|  | pix->pixelformat); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | mf.width	= pix->width; | 
|  | mf.height	= pix->height; | 
|  | mf.field	= pix->field; | 
|  | mf.colorspace	= pix->colorspace; | 
|  | mf.code		= xlate->code; | 
|  |  | 
|  | /* limit to sensor capabilities */ | 
|  | ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | pix->width	= mf.width; | 
|  | pix->height	= mf.height; | 
|  | pix->field	= mf.field; | 
|  | pix->colorspace	= mf.colorspace; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mx1_camera_reqbufs(struct soc_camera_device *icd, | 
|  | struct v4l2_requestbuffers *p) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * This is for locking debugging only. I removed spinlocks and now I | 
|  | * check whether .prepare is ever called on a linked buffer, or whether | 
|  | * a dma IRQ can occur for an in-work or unlinked buffer. Until now | 
|  | * it hadn't triggered | 
|  | */ | 
|  | for (i = 0; i < p->count; i++) { | 
|  | struct mx1_buffer *buf = container_of(icd->vb_vidq.bufs[i], | 
|  | struct mx1_buffer, vb); | 
|  | buf->inwork = 0; | 
|  | INIT_LIST_HEAD(&buf->vb.queue); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static unsigned int mx1_camera_poll(struct file *file, poll_table *pt) | 
|  | { | 
|  | struct soc_camera_device *icd = file->private_data; | 
|  | struct mx1_buffer *buf; | 
|  |  | 
|  | buf = list_entry(icd->vb_vidq.stream.next, struct mx1_buffer, | 
|  | vb.stream); | 
|  |  | 
|  | poll_wait(file, &buf->vb.done, pt); | 
|  |  | 
|  | if (buf->vb.state == VIDEOBUF_DONE || | 
|  | buf->vb.state == VIDEOBUF_ERROR) | 
|  | return POLLIN | POLLRDNORM; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mx1_camera_querycap(struct soc_camera_host *ici, | 
|  | struct v4l2_capability *cap) | 
|  | { | 
|  | /* cap->name is set by the friendly caller:-> */ | 
|  | strlcpy(cap->card, "i.MX1/i.MXL Camera", sizeof(cap->card)); | 
|  | cap->version = VERSION_CODE; | 
|  | cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct soc_camera_host_ops mx1_soc_camera_host_ops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .add		= mx1_camera_add_device, | 
|  | .remove		= mx1_camera_remove_device, | 
|  | .set_bus_param	= mx1_camera_set_bus_param, | 
|  | .set_crop	= mx1_camera_set_crop, | 
|  | .set_fmt	= mx1_camera_set_fmt, | 
|  | .try_fmt	= mx1_camera_try_fmt, | 
|  | .init_videobuf	= mx1_camera_init_videobuf, | 
|  | .reqbufs	= mx1_camera_reqbufs, | 
|  | .poll		= mx1_camera_poll, | 
|  | .querycap	= mx1_camera_querycap, | 
|  | }; | 
|  |  | 
|  | static struct fiq_handler fh = { | 
|  | .name		= "csi_sof" | 
|  | }; | 
|  |  | 
|  | static int __init mx1_camera_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct mx1_camera_dev *pcdev; | 
|  | struct resource *res; | 
|  | struct pt_regs regs; | 
|  | struct clk *clk; | 
|  | void __iomem *base; | 
|  | unsigned int irq; | 
|  | int err = 0; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (!res || (int)irq <= 0) { | 
|  | err = -ENODEV; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | clk = clk_get(&pdev->dev, "csi_clk"); | 
|  | if (IS_ERR(clk)) { | 
|  | err = PTR_ERR(clk); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL); | 
|  | if (!pcdev) { | 
|  | dev_err(&pdev->dev, "Could not allocate pcdev\n"); | 
|  | err = -ENOMEM; | 
|  | goto exit_put_clk; | 
|  | } | 
|  |  | 
|  | pcdev->res = res; | 
|  | pcdev->clk = clk; | 
|  |  | 
|  | pcdev->pdata = pdev->dev.platform_data; | 
|  |  | 
|  | if (pcdev->pdata) | 
|  | pcdev->mclk = pcdev->pdata->mclk_10khz * 10000; | 
|  |  | 
|  | if (!pcdev->mclk) { | 
|  | dev_warn(&pdev->dev, | 
|  | "mclk_10khz == 0! Please, fix your platform data. " | 
|  | "Using default 20MHz\n"); | 
|  | pcdev->mclk = 20000000; | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&pcdev->capture); | 
|  | spin_lock_init(&pcdev->lock); | 
|  |  | 
|  | /* | 
|  | * Request the regions. | 
|  | */ | 
|  | if (!request_mem_region(res->start, resource_size(res), DRIVER_NAME)) { | 
|  | err = -EBUSY; | 
|  | goto exit_kfree; | 
|  | } | 
|  |  | 
|  | base = ioremap(res->start, resource_size(res)); | 
|  | if (!base) { | 
|  | err = -ENOMEM; | 
|  | goto exit_release; | 
|  | } | 
|  | pcdev->irq = irq; | 
|  | pcdev->base = base; | 
|  |  | 
|  | /* request dma */ | 
|  | pcdev->dma_chan = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_HIGH); | 
|  | if (pcdev->dma_chan < 0) { | 
|  | dev_err(&pdev->dev, "Can't request DMA for MX1 CSI\n"); | 
|  | err = -EBUSY; | 
|  | goto exit_iounmap; | 
|  | } | 
|  | dev_dbg(&pdev->dev, "got DMA channel %d\n", pcdev->dma_chan); | 
|  |  | 
|  | imx_dma_setup_handlers(pcdev->dma_chan, mx1_camera_dma_irq, NULL, | 
|  | pcdev); | 
|  |  | 
|  | imx_dma_config_channel(pcdev->dma_chan, IMX_DMA_TYPE_FIFO, | 
|  | IMX_DMA_MEMSIZE_32, MX1_DMA_REQ_CSI_R, 0); | 
|  | /* burst length : 16 words = 64 bytes */ | 
|  | imx_dma_config_burstlen(pcdev->dma_chan, 0); | 
|  |  | 
|  | /* request irq */ | 
|  | err = claim_fiq(&fh); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "Camera interrupt register failed \n"); | 
|  | goto exit_free_dma; | 
|  | } | 
|  |  | 
|  | set_fiq_handler(&mx1_camera_sof_fiq_start, &mx1_camera_sof_fiq_end - | 
|  | &mx1_camera_sof_fiq_start); | 
|  |  | 
|  | regs.ARM_r8 = (long)MX1_DMA_DIMR; | 
|  | regs.ARM_r9 = (long)MX1_DMA_CCR(pcdev->dma_chan); | 
|  | regs.ARM_r10 = (long)pcdev->base + CSICR1; | 
|  | regs.ARM_fp = (long)pcdev->base + CSISR; | 
|  | regs.ARM_sp = 1 << pcdev->dma_chan; | 
|  | set_fiq_regs(®s); | 
|  |  | 
|  | mxc_set_irq_fiq(irq, 1); | 
|  | enable_fiq(irq); | 
|  |  | 
|  | pcdev->soc_host.drv_name	= DRIVER_NAME; | 
|  | pcdev->soc_host.ops		= &mx1_soc_camera_host_ops; | 
|  | pcdev->soc_host.priv		= pcdev; | 
|  | pcdev->soc_host.v4l2_dev.dev	= &pdev->dev; | 
|  | pcdev->soc_host.nr		= pdev->id; | 
|  | err = soc_camera_host_register(&pcdev->soc_host); | 
|  | if (err) | 
|  | goto exit_free_irq; | 
|  |  | 
|  | dev_info(&pdev->dev, "MX1 Camera driver loaded\n"); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_free_irq: | 
|  | disable_fiq(irq); | 
|  | mxc_set_irq_fiq(irq, 0); | 
|  | release_fiq(&fh); | 
|  | exit_free_dma: | 
|  | imx_dma_free(pcdev->dma_chan); | 
|  | exit_iounmap: | 
|  | iounmap(base); | 
|  | exit_release: | 
|  | release_mem_region(res->start, resource_size(res)); | 
|  | exit_kfree: | 
|  | kfree(pcdev); | 
|  | exit_put_clk: | 
|  | clk_put(clk); | 
|  | exit: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int __exit mx1_camera_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); | 
|  | struct mx1_camera_dev *pcdev = container_of(soc_host, | 
|  | struct mx1_camera_dev, soc_host); | 
|  | struct resource *res; | 
|  |  | 
|  | imx_dma_free(pcdev->dma_chan); | 
|  | disable_fiq(pcdev->irq); | 
|  | mxc_set_irq_fiq(pcdev->irq, 0); | 
|  | release_fiq(&fh); | 
|  |  | 
|  | clk_put(pcdev->clk); | 
|  |  | 
|  | soc_camera_host_unregister(soc_host); | 
|  |  | 
|  | iounmap(pcdev->base); | 
|  |  | 
|  | res = pcdev->res; | 
|  | release_mem_region(res->start, resource_size(res)); | 
|  |  | 
|  | kfree(pcdev); | 
|  |  | 
|  | dev_info(&pdev->dev, "MX1 Camera driver unloaded\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver mx1_camera_driver = { | 
|  | .driver 	= { | 
|  | .name	= DRIVER_NAME, | 
|  | }, | 
|  | .remove		= __exit_p(mx1_camera_remove), | 
|  | }; | 
|  |  | 
|  | static int __init mx1_camera_init(void) | 
|  | { | 
|  | return platform_driver_probe(&mx1_camera_driver, mx1_camera_probe); | 
|  | } | 
|  |  | 
|  | static void __exit mx1_camera_exit(void) | 
|  | { | 
|  | return platform_driver_unregister(&mx1_camera_driver); | 
|  | } | 
|  |  | 
|  | module_init(mx1_camera_init); | 
|  | module_exit(mx1_camera_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("i.MX1/i.MXL SoC Camera Host driver"); | 
|  | MODULE_AUTHOR("Paulius Zaleckas <paulius.zaleckas@teltonika.lt>"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_ALIAS("platform:" DRIVER_NAME); |