|  | /******************************************************************************* | 
|  | This is the driver for the MAC 10/100 on-chip Ethernet controller | 
|  | currently tested on all the ST boards based on STb7109 and stx7200 SoCs. | 
|  |  | 
|  | DWC Ether MAC 10/100 Universal version 4.0 has been used for developing | 
|  | this code. | 
|  |  | 
|  | This contains the functions to handle the dma. | 
|  |  | 
|  | Copyright (C) 2007-2009  STMicroelectronics Ltd | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify it | 
|  | under the terms and conditions of the GNU General Public License, | 
|  | version 2, as published by the Free Software Foundation. | 
|  |  | 
|  | This program is distributed in the hope it will be useful, but WITHOUT | 
|  | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License along with | 
|  | this program; if not, write to the Free Software Foundation, Inc., | 
|  | 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | 
|  |  | 
|  | The full GNU General Public License is included in this distribution in | 
|  | the file called "COPYING". | 
|  |  | 
|  | Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> | 
|  | *******************************************************************************/ | 
|  |  | 
|  | #include "dwmac100.h" | 
|  | #include "dwmac_dma.h" | 
|  |  | 
|  | static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, u32 dma_tx, | 
|  | u32 dma_rx) | 
|  | { | 
|  | u32 value = readl(ioaddr + DMA_BUS_MODE); | 
|  | int limit; | 
|  |  | 
|  | /* DMA SW reset */ | 
|  | value |= DMA_BUS_MODE_SFT_RESET; | 
|  | writel(value, ioaddr + DMA_BUS_MODE); | 
|  | limit = 15000; | 
|  | while (limit--) { | 
|  | if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)) | 
|  | break; | 
|  | } | 
|  | if (limit < 0) | 
|  | return -EBUSY; | 
|  |  | 
|  | /* Enable Application Access by writing to DMA CSR0 */ | 
|  | writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT), | 
|  | ioaddr + DMA_BUS_MODE); | 
|  |  | 
|  | /* Mask interrupts by writing to CSR7 */ | 
|  | writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); | 
|  |  | 
|  | /* The base address of the RX/TX descriptor lists must be written into | 
|  | * DMA CSR3 and CSR4, respectively. */ | 
|  | writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); | 
|  | writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Store and Forward capability is not used at all.. | 
|  | * The transmit threshold can be programmed by | 
|  | * setting the TTC bits in the DMA control register.*/ | 
|  | static void dwmac100_dma_operation_mode(void __iomem *ioaddr, int txmode, | 
|  | int rxmode) | 
|  | { | 
|  | u32 csr6 = readl(ioaddr + DMA_CONTROL); | 
|  |  | 
|  | if (txmode <= 32) | 
|  | csr6 |= DMA_CONTROL_TTC_32; | 
|  | else if (txmode <= 64) | 
|  | csr6 |= DMA_CONTROL_TTC_64; | 
|  | else | 
|  | csr6 |= DMA_CONTROL_TTC_128; | 
|  |  | 
|  | writel(csr6, ioaddr + DMA_CONTROL); | 
|  | } | 
|  |  | 
|  | static void dwmac100_dump_dma_regs(void __iomem *ioaddr) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | CHIP_DBG(KERN_DEBUG "DWMAC 100 DMA CSR\n"); | 
|  | for (i = 0; i < 9; i++) | 
|  | pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i, | 
|  | (DMA_BUS_MODE + i * 4), | 
|  | readl(ioaddr + DMA_BUS_MODE + i * 4)); | 
|  | CHIP_DBG(KERN_DEBUG "\t CSR20 (offset 0x%x): 0x%08x\n", | 
|  | DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR)); | 
|  | CHIP_DBG(KERN_DEBUG "\t CSR21 (offset 0x%x): 0x%08x\n", | 
|  | DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR)); | 
|  | } | 
|  |  | 
|  | /* DMA controller has two counters to track the number of | 
|  | * the receive missed frames. */ | 
|  | static void dwmac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, | 
|  | void __iomem *ioaddr) | 
|  | { | 
|  | struct net_device_stats *stats = (struct net_device_stats *)data; | 
|  | u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR); | 
|  |  | 
|  | if (unlikely(csr8)) { | 
|  | if (csr8 & DMA_MISSED_FRAME_OVE) { | 
|  | stats->rx_over_errors += 0x800; | 
|  | x->rx_overflow_cntr += 0x800; | 
|  | } else { | 
|  | unsigned int ove_cntr; | 
|  | ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17); | 
|  | stats->rx_over_errors += ove_cntr; | 
|  | x->rx_overflow_cntr += ove_cntr; | 
|  | } | 
|  |  | 
|  | if (csr8 & DMA_MISSED_FRAME_OVE_M) { | 
|  | stats->rx_missed_errors += 0xffff; | 
|  | x->rx_missed_cntr += 0xffff; | 
|  | } else { | 
|  | unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR); | 
|  | stats->rx_missed_errors += miss_f; | 
|  | x->rx_missed_cntr += miss_f; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | const struct stmmac_dma_ops dwmac100_dma_ops = { | 
|  | .init = dwmac100_dma_init, | 
|  | .dump_regs = dwmac100_dump_dma_regs, | 
|  | .dma_mode = dwmac100_dma_operation_mode, | 
|  | .dma_diagnostic_fr = dwmac100_dma_diagnostic_fr, | 
|  | .enable_dma_transmission = dwmac_enable_dma_transmission, | 
|  | .enable_dma_irq = dwmac_enable_dma_irq, | 
|  | .disable_dma_irq = dwmac_disable_dma_irq, | 
|  | .start_tx = dwmac_dma_start_tx, | 
|  | .stop_tx = dwmac_dma_stop_tx, | 
|  | .start_rx = dwmac_dma_start_rx, | 
|  | .stop_rx = dwmac_dma_stop_rx, | 
|  | .dma_interrupt = dwmac_dma_interrupt, | 
|  | }; |