|  | /* | 
|  | drivers/net/tulip/timer.c | 
|  |  | 
|  | Copyright 2000,2001  The Linux Kernel Team | 
|  | Written/copyright 1994-2001 by Donald Becker. | 
|  |  | 
|  | This software may be used and distributed according to the terms | 
|  | of the GNU General Public License, incorporated herein by reference. | 
|  |  | 
|  | Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} | 
|  | for more information on this driver. | 
|  |  | 
|  | Please submit bugs to http://bugzilla.kernel.org/ . | 
|  | */ | 
|  |  | 
|  |  | 
|  | #include "tulip.h" | 
|  |  | 
|  |  | 
|  | void tulip_media_task(struct work_struct *work) | 
|  | { | 
|  | struct tulip_private *tp = | 
|  | container_of(work, struct tulip_private, media_work); | 
|  | struct net_device *dev = tp->dev; | 
|  | void __iomem *ioaddr = tp->base_addr; | 
|  | u32 csr12 = ioread32(ioaddr + CSR12); | 
|  | int next_tick = 2*HZ; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (tulip_debug > 2) { | 
|  | netdev_dbg(dev, "Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n", | 
|  | medianame[dev->if_port], | 
|  | ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6), | 
|  | csr12, ioread32(ioaddr + CSR13), | 
|  | ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15)); | 
|  | } | 
|  | switch (tp->chip_id) { | 
|  | case DC21140: | 
|  | case DC21142: | 
|  | case MX98713: | 
|  | case COMPEX9881: | 
|  | case DM910X: | 
|  | default: { | 
|  | struct medialeaf *mleaf; | 
|  | unsigned char *p; | 
|  | if (tp->mtable == NULL) {	/* No EEPROM info, use generic code. */ | 
|  | /* Not much that can be done. | 
|  | Assume this a generic MII or SYM transceiver. */ | 
|  | next_tick = 60*HZ; | 
|  | if (tulip_debug > 2) | 
|  | netdev_dbg(dev, "network media monitor CSR6 %08x CSR12 0x%02x\n", | 
|  | ioread32(ioaddr + CSR6), | 
|  | csr12 & 0xff); | 
|  | break; | 
|  | } | 
|  | mleaf = &tp->mtable->mleaf[tp->cur_index]; | 
|  | p = mleaf->leafdata; | 
|  | switch (mleaf->type) { | 
|  | case 0: case 4: { | 
|  | /* Type 0 serial or 4 SYM transceiver.  Check the link beat bit. */ | 
|  | int offset = mleaf->type == 4 ? 5 : 2; | 
|  | s8 bitnum = p[offset]; | 
|  | if (p[offset+1] & 0x80) { | 
|  | if (tulip_debug > 1) | 
|  | netdev_dbg(dev, "Transceiver monitor tick CSR12=%#02x, no media sense\n", | 
|  | csr12); | 
|  | if (mleaf->type == 4) { | 
|  | if (mleaf->media == 3 && (csr12 & 0x02)) | 
|  | goto select_next_media; | 
|  | } | 
|  | break; | 
|  | } | 
|  | if (tulip_debug > 2) | 
|  | netdev_dbg(dev, "Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n", | 
|  | csr12, (bitnum >> 1) & 7, | 
|  | (csr12 & (1 << ((bitnum >> 1) & 7))) != 0, | 
|  | (bitnum >= 0)); | 
|  | /* Check that the specified bit has the proper value. */ | 
|  | if ((bitnum < 0) != | 
|  | ((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) { | 
|  | if (tulip_debug > 2) | 
|  | netdev_dbg(dev, "Link beat detected for %s\n", | 
|  | medianame[mleaf->media & MEDIA_MASK]); | 
|  | if ((p[2] & 0x61) == 0x01)	/* Bogus Znyx board. */ | 
|  | goto actually_mii; | 
|  | netif_carrier_on(dev); | 
|  | break; | 
|  | } | 
|  | netif_carrier_off(dev); | 
|  | if (tp->medialock) | 
|  | break; | 
|  | select_next_media: | 
|  | if (--tp->cur_index < 0) { | 
|  | /* We start again, but should instead look for default. */ | 
|  | tp->cur_index = tp->mtable->leafcount - 1; | 
|  | } | 
|  | dev->if_port = tp->mtable->mleaf[tp->cur_index].media; | 
|  | if (tulip_media_cap[dev->if_port] & MediaIsFD) | 
|  | goto select_next_media; /* Skip FD entries. */ | 
|  | if (tulip_debug > 1) | 
|  | netdev_dbg(dev, "No link beat on media %s, trying transceiver type %s\n", | 
|  | medianame[mleaf->media & MEDIA_MASK], | 
|  | medianame[tp->mtable->mleaf[tp->cur_index].media]); | 
|  | tulip_select_media(dev, 0); | 
|  | /* Restart the transmit process. */ | 
|  | tulip_restart_rxtx(tp); | 
|  | next_tick = (24*HZ)/10; | 
|  | break; | 
|  | } | 
|  | case 1:  case 3:		/* 21140, 21142 MII */ | 
|  | actually_mii: | 
|  | if (tulip_check_duplex(dev) < 0) { | 
|  | netif_carrier_off(dev); | 
|  | next_tick = 3*HZ; | 
|  | } else { | 
|  | netif_carrier_on(dev); | 
|  | next_tick = 60*HZ; | 
|  | } | 
|  | break; | 
|  | case 2:					/* 21142 serial block has no link beat. */ | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  |  | 
|  | spin_lock_irqsave(&tp->lock, flags); | 
|  | if (tp->timeout_recovery) { | 
|  | tulip_tx_timeout_complete(tp, ioaddr); | 
|  | tp->timeout_recovery = 0; | 
|  | } | 
|  | spin_unlock_irqrestore(&tp->lock, flags); | 
|  |  | 
|  | /* mod_timer synchronizes us with potential add_timer calls | 
|  | * from interrupts. | 
|  | */ | 
|  | mod_timer(&tp->timer, RUN_AT(next_tick)); | 
|  | } | 
|  |  | 
|  |  | 
|  | void mxic_timer(unsigned long data) | 
|  | { | 
|  | struct net_device *dev = (struct net_device *)data; | 
|  | struct tulip_private *tp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = tp->base_addr; | 
|  | int next_tick = 60*HZ; | 
|  |  | 
|  | if (tulip_debug > 3) { | 
|  | dev_info(&dev->dev, "MXIC negotiation status %08x\n", | 
|  | ioread32(ioaddr + CSR12)); | 
|  | } | 
|  | if (next_tick) { | 
|  | mod_timer(&tp->timer, RUN_AT(next_tick)); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | void comet_timer(unsigned long data) | 
|  | { | 
|  | struct net_device *dev = (struct net_device *)data; | 
|  | struct tulip_private *tp = netdev_priv(dev); | 
|  | int next_tick = 60*HZ; | 
|  |  | 
|  | if (tulip_debug > 1) | 
|  | netdev_dbg(dev, "Comet link status %04x partner capability %04x\n", | 
|  | tulip_mdio_read(dev, tp->phys[0], 1), | 
|  | tulip_mdio_read(dev, tp->phys[0], 5)); | 
|  | /* mod_timer synchronizes us with potential add_timer calls | 
|  | * from interrupts. | 
|  | */ | 
|  | if (tulip_check_duplex(dev) < 0) | 
|  | { netif_carrier_off(dev); } | 
|  | else | 
|  | { netif_carrier_on(dev); } | 
|  | mod_timer(&tp->timer, RUN_AT(next_tick)); | 
|  | } | 
|  |  |