|  | /****************************************************************************** | 
|  | * This software may be used and distributed according to the terms of | 
|  | * the GNU General Public License (GPL), incorporated herein by reference. | 
|  | * Drivers based on or derived from this code fall under the GPL and must | 
|  | * retain the authorship, copyright and license notice.  This file is not | 
|  | * a complete program and may only be used when the entire operating | 
|  | * system is licensed under the GPL. | 
|  | * See the file COPYING in this distribution for more information. | 
|  | * | 
|  | * vxge-main.c: Driver for Exar Corp's X3100 Series 10GbE PCIe I/O | 
|  | *              Virtualized Server Adapter. | 
|  | * Copyright(c) 2002-2010 Exar Corp. | 
|  | * | 
|  | * The module loadable parameters that are supported by the driver and a brief | 
|  | * explanation of all the variables: | 
|  | * vlan_tag_strip: | 
|  | *	Strip VLAN Tag enable/disable. Instructs the device to remove | 
|  | *	the VLAN tag from all received tagged frames that are not | 
|  | *	replicated at the internal L2 switch. | 
|  | *		0 - Do not strip the VLAN tag. | 
|  | *		1 - Strip the VLAN tag. | 
|  | * | 
|  | * addr_learn_en: | 
|  | *	Enable learning the mac address of the guest OS interface in | 
|  | *	a virtualization environment. | 
|  | *		0 - DISABLE | 
|  | *		1 - ENABLE | 
|  | * | 
|  | * max_config_port: | 
|  | *	Maximum number of port to be supported. | 
|  | *		MIN -1 and MAX - 2 | 
|  | * | 
|  | * max_config_vpath: | 
|  | *	This configures the maximum no of VPATH configures for each | 
|  | * 	device function. | 
|  | *		MIN - 1 and MAX - 17 | 
|  | * | 
|  | * max_config_dev: | 
|  | *	This configures maximum no of Device function to be enabled. | 
|  | *		MIN - 1 and MAX - 17 | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/if_vlan.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/tcp.h> | 
|  | #include <net/ip.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/firmware.h> | 
|  | #include <linux/net_tstamp.h> | 
|  | #include <linux/prefetch.h> | 
|  | #include "vxge-main.h" | 
|  | #include "vxge-reg.h" | 
|  |  | 
|  | MODULE_LICENSE("Dual BSD/GPL"); | 
|  | MODULE_DESCRIPTION("Neterion's X3100 Series 10GbE PCIe I/O" | 
|  | "Virtualized Server Adapter"); | 
|  |  | 
|  | static DEFINE_PCI_DEVICE_TABLE(vxge_id_table) = { | 
|  | {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_WIN, PCI_ANY_ID, | 
|  | PCI_ANY_ID}, | 
|  | {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_UNI, PCI_ANY_ID, | 
|  | PCI_ANY_ID}, | 
|  | {0} | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pci, vxge_id_table); | 
|  |  | 
|  | VXGE_MODULE_PARAM_INT(vlan_tag_strip, VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE); | 
|  | VXGE_MODULE_PARAM_INT(addr_learn_en, VXGE_HW_MAC_ADDR_LEARN_DEFAULT); | 
|  | VXGE_MODULE_PARAM_INT(max_config_port, VXGE_MAX_CONFIG_PORT); | 
|  | VXGE_MODULE_PARAM_INT(max_config_vpath, VXGE_USE_DEFAULT); | 
|  | VXGE_MODULE_PARAM_INT(max_mac_vpath, VXGE_MAX_MAC_ADDR_COUNT); | 
|  | VXGE_MODULE_PARAM_INT(max_config_dev, VXGE_MAX_CONFIG_DEV); | 
|  |  | 
|  | static u16 vpath_selector[VXGE_HW_MAX_VIRTUAL_PATHS] = | 
|  | {0, 1, 3, 3, 7, 7, 7, 7, 15, 15, 15, 15, 15, 15, 15, 15, 31}; | 
|  | static unsigned int bw_percentage[VXGE_HW_MAX_VIRTUAL_PATHS] = | 
|  | {[0 ...(VXGE_HW_MAX_VIRTUAL_PATHS - 1)] = 0xFF}; | 
|  | module_param_array(bw_percentage, uint, NULL, 0); | 
|  |  | 
|  | static struct vxge_drv_config *driver_config; | 
|  |  | 
|  | static inline int is_vxge_card_up(struct vxgedev *vdev) | 
|  | { | 
|  | return test_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  | } | 
|  |  | 
|  | static inline void VXGE_COMPLETE_VPATH_TX(struct vxge_fifo *fifo) | 
|  | { | 
|  | struct sk_buff **skb_ptr = NULL; | 
|  | struct sk_buff **temp; | 
|  | #define NR_SKB_COMPLETED 128 | 
|  | struct sk_buff *completed[NR_SKB_COMPLETED]; | 
|  | int more; | 
|  |  | 
|  | do { | 
|  | more = 0; | 
|  | skb_ptr = completed; | 
|  |  | 
|  | if (__netif_tx_trylock(fifo->txq)) { | 
|  | vxge_hw_vpath_poll_tx(fifo->handle, &skb_ptr, | 
|  | NR_SKB_COMPLETED, &more); | 
|  | __netif_tx_unlock(fifo->txq); | 
|  | } | 
|  |  | 
|  | /* free SKBs */ | 
|  | for (temp = completed; temp != skb_ptr; temp++) | 
|  | dev_kfree_skb_irq(*temp); | 
|  | } while (more); | 
|  | } | 
|  |  | 
|  | static inline void VXGE_COMPLETE_ALL_TX(struct vxgedev *vdev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* Complete all transmits */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | VXGE_COMPLETE_VPATH_TX(&vdev->vpaths[i].fifo); | 
|  | } | 
|  |  | 
|  | static inline void VXGE_COMPLETE_ALL_RX(struct vxgedev *vdev) | 
|  | { | 
|  | int i; | 
|  | struct vxge_ring *ring; | 
|  |  | 
|  | /* Complete all receives*/ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | ring = &vdev->vpaths[i].ring; | 
|  | vxge_hw_vpath_poll_rx(ring->handle); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_callback_link_up | 
|  | * | 
|  | * This function is called during interrupt context to notify link up state | 
|  | * change. | 
|  | */ | 
|  | static void vxge_callback_link_up(struct __vxge_hw_device *hldev) | 
|  | { | 
|  | struct net_device *dev = hldev->ndev; | 
|  | struct vxgedev *vdev = netdev_priv(dev); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | vdev->ndev->name, __func__, __LINE__); | 
|  | netdev_notice(vdev->ndev, "Link Up\n"); | 
|  | vdev->stats.link_up++; | 
|  |  | 
|  | netif_carrier_on(vdev->ndev); | 
|  | netif_tx_wake_all_queues(vdev->ndev); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_callback_link_down | 
|  | * | 
|  | * This function is called during interrupt context to notify link down state | 
|  | * change. | 
|  | */ | 
|  | static void vxge_callback_link_down(struct __vxge_hw_device *hldev) | 
|  | { | 
|  | struct net_device *dev = hldev->ndev; | 
|  | struct vxgedev *vdev = netdev_priv(dev); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | 
|  | netdev_notice(vdev->ndev, "Link Down\n"); | 
|  |  | 
|  | vdev->stats.link_down++; | 
|  | netif_carrier_off(vdev->ndev); | 
|  | netif_tx_stop_all_queues(vdev->ndev); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_rx_alloc | 
|  | * | 
|  | * Allocate SKB. | 
|  | */ | 
|  | static struct sk_buff * | 
|  | vxge_rx_alloc(void *dtrh, struct vxge_ring *ring, const int skb_size) | 
|  | { | 
|  | struct net_device    *dev; | 
|  | struct sk_buff       *skb; | 
|  | struct vxge_rx_priv *rx_priv; | 
|  |  | 
|  | dev = ring->ndev; | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | 
|  |  | 
|  | /* try to allocate skb first. this one may fail */ | 
|  | skb = netdev_alloc_skb(dev, skb_size + | 
|  | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | 
|  | if (skb == NULL) { | 
|  | vxge_debug_mem(VXGE_ERR, | 
|  | "%s: out of memory to allocate SKB", dev->name); | 
|  | ring->stats.skb_alloc_fail++; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | vxge_debug_mem(VXGE_TRACE, | 
|  | "%s: %s:%d  Skb : 0x%p", ring->ndev->name, | 
|  | __func__, __LINE__, skb); | 
|  |  | 
|  | skb_reserve(skb, VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | 
|  |  | 
|  | rx_priv->skb = skb; | 
|  | rx_priv->skb_data = NULL; | 
|  | rx_priv->data_size = skb_size; | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_rx_map | 
|  | */ | 
|  | static int vxge_rx_map(void *dtrh, struct vxge_ring *ring) | 
|  | { | 
|  | struct vxge_rx_priv *rx_priv; | 
|  | dma_addr_t dma_addr; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | 
|  |  | 
|  | rx_priv->skb_data = rx_priv->skb->data; | 
|  | dma_addr = pci_map_single(ring->pdev, rx_priv->skb_data, | 
|  | rx_priv->data_size, PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | if (unlikely(pci_dma_mapping_error(ring->pdev, dma_addr))) { | 
|  | ring->stats.pci_map_fail++; | 
|  | return -EIO; | 
|  | } | 
|  | vxge_debug_mem(VXGE_TRACE, | 
|  | "%s: %s:%d  1 buffer mode dma_addr = 0x%llx", | 
|  | ring->ndev->name, __func__, __LINE__, | 
|  | (unsigned long long)dma_addr); | 
|  | vxge_hw_ring_rxd_1b_set(dtrh, dma_addr, rx_priv->data_size); | 
|  |  | 
|  | rx_priv->data_dma = dma_addr; | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_rx_initial_replenish | 
|  | * Allocation of RxD as an initial replenish procedure. | 
|  | */ | 
|  | static enum vxge_hw_status | 
|  | vxge_rx_initial_replenish(void *dtrh, void *userdata) | 
|  | { | 
|  | struct vxge_ring *ring = (struct vxge_ring *)userdata; | 
|  | struct vxge_rx_priv *rx_priv; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  | if (vxge_rx_alloc(dtrh, ring, | 
|  | VXGE_LL_MAX_FRAME_SIZE(ring->ndev)) == NULL) | 
|  | return VXGE_HW_FAIL; | 
|  |  | 
|  | if (vxge_rx_map(dtrh, ring)) { | 
|  | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | 
|  | dev_kfree_skb(rx_priv->skb); | 
|  |  | 
|  | return VXGE_HW_FAIL; | 
|  | } | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | return VXGE_HW_OK; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | vxge_rx_complete(struct vxge_ring *ring, struct sk_buff *skb, u16 vlan, | 
|  | int pkt_length, struct vxge_hw_ring_rxd_info *ext_info) | 
|  | { | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  | skb_record_rx_queue(skb, ring->driver_id); | 
|  | skb->protocol = eth_type_trans(skb, ring->ndev); | 
|  |  | 
|  | ring->stats.rx_frms++; | 
|  | ring->stats.rx_bytes += pkt_length; | 
|  |  | 
|  | if (skb->pkt_type == PACKET_MULTICAST) | 
|  | ring->stats.rx_mcast++; | 
|  |  | 
|  | vxge_debug_rx(VXGE_TRACE, | 
|  | "%s: %s:%d  skb protocol = %d", | 
|  | ring->ndev->name, __func__, __LINE__, skb->protocol); | 
|  |  | 
|  | if (ring->vlgrp && ext_info->vlan && | 
|  | (ring->vlan_tag_strip == | 
|  | VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE)) | 
|  | vlan_gro_receive(ring->napi_p, ring->vlgrp, | 
|  | ext_info->vlan, skb); | 
|  | else | 
|  | napi_gro_receive(ring->napi_p, skb); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | static inline void vxge_re_pre_post(void *dtr, struct vxge_ring *ring, | 
|  | struct vxge_rx_priv *rx_priv) | 
|  | { | 
|  | pci_dma_sync_single_for_device(ring->pdev, | 
|  | rx_priv->data_dma, rx_priv->data_size, PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | vxge_hw_ring_rxd_1b_set(dtr, rx_priv->data_dma, rx_priv->data_size); | 
|  | vxge_hw_ring_rxd_pre_post(ring->handle, dtr); | 
|  | } | 
|  |  | 
|  | static inline void vxge_post(int *dtr_cnt, void **first_dtr, | 
|  | void *post_dtr, struct __vxge_hw_ring *ringh) | 
|  | { | 
|  | int dtr_count = *dtr_cnt; | 
|  | if ((*dtr_cnt % VXGE_HW_RXSYNC_FREQ_CNT) == 0) { | 
|  | if (*first_dtr) | 
|  | vxge_hw_ring_rxd_post_post_wmb(ringh, *first_dtr); | 
|  | *first_dtr = post_dtr; | 
|  | } else | 
|  | vxge_hw_ring_rxd_post_post(ringh, post_dtr); | 
|  | dtr_count++; | 
|  | *dtr_cnt = dtr_count; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_rx_1b_compl | 
|  | * | 
|  | * If the interrupt is because of a received frame or if the receive ring | 
|  | * contains fresh as yet un-processed frames, this function is called. | 
|  | */ | 
|  | static enum vxge_hw_status | 
|  | vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr, | 
|  | u8 t_code, void *userdata) | 
|  | { | 
|  | struct vxge_ring *ring = (struct vxge_ring *)userdata; | 
|  | struct net_device *dev = ring->ndev; | 
|  | unsigned int dma_sizes; | 
|  | void *first_dtr = NULL; | 
|  | int dtr_cnt = 0; | 
|  | int data_size; | 
|  | dma_addr_t data_dma; | 
|  | int pkt_length; | 
|  | struct sk_buff *skb; | 
|  | struct vxge_rx_priv *rx_priv; | 
|  | struct vxge_hw_ring_rxd_info ext_info; | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | do { | 
|  | prefetch((char *)dtr + L1_CACHE_BYTES); | 
|  | rx_priv = vxge_hw_ring_rxd_private_get(dtr); | 
|  | skb = rx_priv->skb; | 
|  | data_size = rx_priv->data_size; | 
|  | data_dma = rx_priv->data_dma; | 
|  | prefetch(rx_priv->skb_data); | 
|  |  | 
|  | vxge_debug_rx(VXGE_TRACE, | 
|  | "%s: %s:%d  skb = 0x%p", | 
|  | ring->ndev->name, __func__, __LINE__, skb); | 
|  |  | 
|  | vxge_hw_ring_rxd_1b_get(ringh, dtr, &dma_sizes); | 
|  | pkt_length = dma_sizes; | 
|  |  | 
|  | pkt_length -= ETH_FCS_LEN; | 
|  |  | 
|  | vxge_debug_rx(VXGE_TRACE, | 
|  | "%s: %s:%d  Packet Length = %d", | 
|  | ring->ndev->name, __func__, __LINE__, pkt_length); | 
|  |  | 
|  | vxge_hw_ring_rxd_1b_info_get(ringh, dtr, &ext_info); | 
|  |  | 
|  | /* check skb validity */ | 
|  | vxge_assert(skb); | 
|  |  | 
|  | prefetch((char *)skb + L1_CACHE_BYTES); | 
|  | if (unlikely(t_code)) { | 
|  | if (vxge_hw_ring_handle_tcode(ringh, dtr, t_code) != | 
|  | VXGE_HW_OK) { | 
|  |  | 
|  | ring->stats.rx_errors++; | 
|  | vxge_debug_rx(VXGE_TRACE, | 
|  | "%s: %s :%d Rx T_code is %d", | 
|  | ring->ndev->name, __func__, | 
|  | __LINE__, t_code); | 
|  |  | 
|  | /* If the t_code is not supported and if the | 
|  | * t_code is other than 0x5 (unparseable packet | 
|  | * such as unknown UPV6 header), Drop it !!! | 
|  | */ | 
|  | vxge_re_pre_post(dtr, ring, rx_priv); | 
|  |  | 
|  | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | 
|  | ring->stats.rx_dropped++; | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (pkt_length > VXGE_LL_RX_COPY_THRESHOLD) { | 
|  | if (vxge_rx_alloc(dtr, ring, data_size) != NULL) { | 
|  | if (!vxge_rx_map(dtr, ring)) { | 
|  | skb_put(skb, pkt_length); | 
|  |  | 
|  | pci_unmap_single(ring->pdev, data_dma, | 
|  | data_size, PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | vxge_hw_ring_rxd_pre_post(ringh, dtr); | 
|  | vxge_post(&dtr_cnt, &first_dtr, dtr, | 
|  | ringh); | 
|  | } else { | 
|  | dev_kfree_skb(rx_priv->skb); | 
|  | rx_priv->skb = skb; | 
|  | rx_priv->data_size = data_size; | 
|  | vxge_re_pre_post(dtr, ring, rx_priv); | 
|  |  | 
|  | vxge_post(&dtr_cnt, &first_dtr, dtr, | 
|  | ringh); | 
|  | ring->stats.rx_dropped++; | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | vxge_re_pre_post(dtr, ring, rx_priv); | 
|  |  | 
|  | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | 
|  | ring->stats.rx_dropped++; | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | struct sk_buff *skb_up; | 
|  |  | 
|  | skb_up = netdev_alloc_skb(dev, pkt_length + | 
|  | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | 
|  | if (skb_up != NULL) { | 
|  | skb_reserve(skb_up, | 
|  | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | 
|  |  | 
|  | pci_dma_sync_single_for_cpu(ring->pdev, | 
|  | data_dma, data_size, | 
|  | PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | vxge_debug_mem(VXGE_TRACE, | 
|  | "%s: %s:%d  skb_up = %p", | 
|  | ring->ndev->name, __func__, | 
|  | __LINE__, skb); | 
|  | memcpy(skb_up->data, skb->data, pkt_length); | 
|  |  | 
|  | vxge_re_pre_post(dtr, ring, rx_priv); | 
|  |  | 
|  | vxge_post(&dtr_cnt, &first_dtr, dtr, | 
|  | ringh); | 
|  | /* will netif_rx small SKB instead */ | 
|  | skb = skb_up; | 
|  | skb_put(skb, pkt_length); | 
|  | } else { | 
|  | vxge_re_pre_post(dtr, ring, rx_priv); | 
|  |  | 
|  | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | 
|  | vxge_debug_rx(VXGE_ERR, | 
|  | "%s: vxge_rx_1b_compl: out of " | 
|  | "memory", dev->name); | 
|  | ring->stats.skb_alloc_fail++; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((ext_info.proto & VXGE_HW_FRAME_PROTO_TCP_OR_UDP) && | 
|  | !(ext_info.proto & VXGE_HW_FRAME_PROTO_IP_FRAG) && | 
|  | (dev->features & NETIF_F_RXCSUM) && /* Offload Rx side CSUM */ | 
|  | ext_info.l3_cksum == VXGE_HW_L3_CKSUM_OK && | 
|  | ext_info.l4_cksum == VXGE_HW_L4_CKSUM_OK) | 
|  | skb->ip_summed = CHECKSUM_UNNECESSARY; | 
|  | else | 
|  | skb_checksum_none_assert(skb); | 
|  |  | 
|  |  | 
|  | if (ring->rx_hwts) { | 
|  | struct skb_shared_hwtstamps *skb_hwts; | 
|  | u32 ns = *(u32 *)(skb->head + pkt_length); | 
|  |  | 
|  | skb_hwts = skb_hwtstamps(skb); | 
|  | skb_hwts->hwtstamp = ns_to_ktime(ns); | 
|  | skb_hwts->syststamp.tv64 = 0; | 
|  | } | 
|  |  | 
|  | /* rth_hash_type and rth_it_hit are non-zero regardless of | 
|  | * whether rss is enabled.  Only the rth_value is zero/non-zero | 
|  | * if rss is disabled/enabled, so key off of that. | 
|  | */ | 
|  | if (ext_info.rth_value) | 
|  | skb->rxhash = ext_info.rth_value; | 
|  |  | 
|  | vxge_rx_complete(ring, skb, ext_info.vlan, | 
|  | pkt_length, &ext_info); | 
|  |  | 
|  | ring->budget--; | 
|  | ring->pkts_processed++; | 
|  | if (!ring->budget) | 
|  | break; | 
|  |  | 
|  | } while (vxge_hw_ring_rxd_next_completed(ringh, &dtr, | 
|  | &t_code) == VXGE_HW_OK); | 
|  |  | 
|  | if (first_dtr) | 
|  | vxge_hw_ring_rxd_post_post_wmb(ringh, first_dtr); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", | 
|  | __func__, __LINE__); | 
|  | return VXGE_HW_OK; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_xmit_compl | 
|  | * | 
|  | * If an interrupt was raised to indicate DMA complete of the Tx packet, | 
|  | * this function is called. It identifies the last TxD whose buffer was | 
|  | * freed and frees all skbs whose data have already DMA'ed into the NICs | 
|  | * internal memory. | 
|  | */ | 
|  | static enum vxge_hw_status | 
|  | vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr, | 
|  | enum vxge_hw_fifo_tcode t_code, void *userdata, | 
|  | struct sk_buff ***skb_ptr, int nr_skb, int *more) | 
|  | { | 
|  | struct vxge_fifo *fifo = (struct vxge_fifo *)userdata; | 
|  | struct sk_buff *skb, **done_skb = *skb_ptr; | 
|  | int pkt_cnt = 0; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d Entered....", __func__, __LINE__); | 
|  |  | 
|  | do { | 
|  | int frg_cnt; | 
|  | skb_frag_t *frag; | 
|  | int i = 0, j; | 
|  | struct vxge_tx_priv *txd_priv = | 
|  | vxge_hw_fifo_txdl_private_get(dtr); | 
|  |  | 
|  | skb = txd_priv->skb; | 
|  | frg_cnt = skb_shinfo(skb)->nr_frags; | 
|  | frag = &skb_shinfo(skb)->frags[0]; | 
|  |  | 
|  | vxge_debug_tx(VXGE_TRACE, | 
|  | "%s: %s:%d fifo_hw = %p dtr = %p " | 
|  | "tcode = 0x%x", fifo->ndev->name, __func__, | 
|  | __LINE__, fifo_hw, dtr, t_code); | 
|  | /* check skb validity */ | 
|  | vxge_assert(skb); | 
|  | vxge_debug_tx(VXGE_TRACE, | 
|  | "%s: %s:%d skb = %p itxd_priv = %p frg_cnt = %d", | 
|  | fifo->ndev->name, __func__, __LINE__, | 
|  | skb, txd_priv, frg_cnt); | 
|  | if (unlikely(t_code)) { | 
|  | fifo->stats.tx_errors++; | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: tx: dtr %p completed due to " | 
|  | "error t_code %01x", fifo->ndev->name, | 
|  | dtr, t_code); | 
|  | vxge_hw_fifo_handle_tcode(fifo_hw, dtr, t_code); | 
|  | } | 
|  |  | 
|  | /*  for unfragmented skb */ | 
|  | pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++], | 
|  | skb_headlen(skb), PCI_DMA_TODEVICE); | 
|  |  | 
|  | for (j = 0; j < frg_cnt; j++) { | 
|  | pci_unmap_page(fifo->pdev, | 
|  | txd_priv->dma_buffers[i++], | 
|  | frag->size, PCI_DMA_TODEVICE); | 
|  | frag += 1; | 
|  | } | 
|  |  | 
|  | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | 
|  |  | 
|  | /* Updating the statistics block */ | 
|  | fifo->stats.tx_frms++; | 
|  | fifo->stats.tx_bytes += skb->len; | 
|  |  | 
|  | *done_skb++ = skb; | 
|  |  | 
|  | if (--nr_skb <= 0) { | 
|  | *more = 1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | pkt_cnt++; | 
|  | if (pkt_cnt > fifo->indicate_max_pkts) | 
|  | break; | 
|  |  | 
|  | } while (vxge_hw_fifo_txdl_next_completed(fifo_hw, | 
|  | &dtr, &t_code) == VXGE_HW_OK); | 
|  |  | 
|  | *skb_ptr = done_skb; | 
|  | if (netif_tx_queue_stopped(fifo->txq)) | 
|  | netif_tx_wake_queue(fifo->txq); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d  Exiting...", | 
|  | fifo->ndev->name, __func__, __LINE__); | 
|  | return VXGE_HW_OK; | 
|  | } | 
|  |  | 
|  | /* select a vpath to transmit the packet */ | 
|  | static u32 vxge_get_vpath_no(struct vxgedev *vdev, struct sk_buff *skb) | 
|  | { | 
|  | u16 queue_len, counter = 0; | 
|  | if (skb->protocol == htons(ETH_P_IP)) { | 
|  | struct iphdr *ip; | 
|  | struct tcphdr *th; | 
|  |  | 
|  | ip = ip_hdr(skb); | 
|  |  | 
|  | if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) { | 
|  | th = (struct tcphdr *)(((unsigned char *)ip) + | 
|  | ip->ihl*4); | 
|  |  | 
|  | queue_len = vdev->no_of_vpath; | 
|  | counter = (ntohs(th->source) + | 
|  | ntohs(th->dest)) & | 
|  | vdev->vpath_selector[queue_len - 1]; | 
|  | if (counter >= queue_len) | 
|  | counter = queue_len - 1; | 
|  | } | 
|  | } | 
|  | return counter; | 
|  | } | 
|  |  | 
|  | static enum vxge_hw_status vxge_search_mac_addr_in_list( | 
|  | struct vxge_vpath *vpath, u64 del_mac) | 
|  | { | 
|  | struct list_head *entry, *next; | 
|  | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | 
|  | if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) | 
|  | return TRUE; | 
|  | } | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | static int vxge_mac_list_add(struct vxge_vpath *vpath, struct macInfo *mac) | 
|  | { | 
|  | struct vxge_mac_addrs *new_mac_entry; | 
|  | u8 *mac_address = NULL; | 
|  |  | 
|  | if (vpath->mac_addr_cnt >= VXGE_MAX_LEARN_MAC_ADDR_CNT) | 
|  | return TRUE; | 
|  |  | 
|  | new_mac_entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_ATOMIC); | 
|  | if (!new_mac_entry) { | 
|  | vxge_debug_mem(VXGE_ERR, | 
|  | "%s: memory allocation failed", | 
|  | VXGE_DRIVER_NAME); | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | list_add(&new_mac_entry->item, &vpath->mac_addr_list); | 
|  |  | 
|  | /* Copy the new mac address to the list */ | 
|  | mac_address = (u8 *)&new_mac_entry->macaddr; | 
|  | memcpy(mac_address, mac->macaddr, ETH_ALEN); | 
|  |  | 
|  | new_mac_entry->state = mac->state; | 
|  | vpath->mac_addr_cnt++; | 
|  |  | 
|  | /* Is this a multicast address */ | 
|  | if (0x01 & mac->macaddr[0]) | 
|  | vpath->mcast_addr_cnt++; | 
|  |  | 
|  | return TRUE; | 
|  | } | 
|  |  | 
|  | /* Add a mac address to DA table */ | 
|  | static enum vxge_hw_status | 
|  | vxge_add_mac_addr(struct vxgedev *vdev, struct macInfo *mac) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxge_vpath *vpath; | 
|  | enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode; | 
|  |  | 
|  | if (0x01 & mac->macaddr[0]) /* multicast address */ | 
|  | duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE; | 
|  | else | 
|  | duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_REPLACE_DUPLICATE; | 
|  |  | 
|  | vpath = &vdev->vpaths[mac->vpath_no]; | 
|  | status = vxge_hw_vpath_mac_addr_add(vpath->handle, mac->macaddr, | 
|  | mac->macmask, duplicate_mode); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "DA config add entry failed for vpath:%d", | 
|  | vpath->device_id); | 
|  | } else | 
|  | if (FALSE == vxge_mac_list_add(vpath, mac)) | 
|  | status = -EPERM; | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header) | 
|  | { | 
|  | struct macInfo mac_info; | 
|  | u8 *mac_address = NULL; | 
|  | u64 mac_addr = 0, vpath_vector = 0; | 
|  | int vpath_idx = 0; | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxge_vpath *vpath = NULL; | 
|  | struct __vxge_hw_device *hldev; | 
|  |  | 
|  | hldev = pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | mac_address = (u8 *)&mac_addr; | 
|  | memcpy(mac_address, mac_header, ETH_ALEN); | 
|  |  | 
|  | /* Is this mac address already in the list? */ | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
|  | vpath = &vdev->vpaths[vpath_idx]; | 
|  | if (vxge_search_mac_addr_in_list(vpath, mac_addr)) | 
|  | return vpath_idx; | 
|  | } | 
|  |  | 
|  | memset(&mac_info, 0, sizeof(struct macInfo)); | 
|  | memcpy(mac_info.macaddr, mac_header, ETH_ALEN); | 
|  |  | 
|  | /* Any vpath has room to add mac address to its da table? */ | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
|  | vpath = &vdev->vpaths[vpath_idx]; | 
|  | if (vpath->mac_addr_cnt < vpath->max_mac_addr_cnt) { | 
|  | /* Add this mac address to this vpath */ | 
|  | mac_info.vpath_no = vpath_idx; | 
|  | mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | 
|  | status = vxge_add_mac_addr(vdev, &mac_info); | 
|  | if (status != VXGE_HW_OK) | 
|  | return -EPERM; | 
|  | return vpath_idx; | 
|  | } | 
|  | } | 
|  |  | 
|  | mac_info.state = VXGE_LL_MAC_ADDR_IN_LIST; | 
|  | vpath_idx = 0; | 
|  | mac_info.vpath_no = vpath_idx; | 
|  | /* Is the first vpath already selected as catch-basin ? */ | 
|  | vpath = &vdev->vpaths[vpath_idx]; | 
|  | if (vpath->mac_addr_cnt > vpath->max_mac_addr_cnt) { | 
|  | /* Add this mac address to this vpath */ | 
|  | if (FALSE == vxge_mac_list_add(vpath, &mac_info)) | 
|  | return -EPERM; | 
|  | return vpath_idx; | 
|  | } | 
|  |  | 
|  | /* Select first vpath as catch-basin */ | 
|  | vpath_vector = vxge_mBIT(vpath->device_id); | 
|  | status = vxge_hw_mgmt_reg_write(vpath->vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof( | 
|  | struct vxge_hw_mrpcim_reg, | 
|  | rts_mgr_cbasin_cfg), | 
|  | vpath_vector); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: Unable to set the vpath-%d in catch-basin mode", | 
|  | VXGE_DRIVER_NAME, vpath->device_id); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | if (FALSE == vxge_mac_list_add(vpath, &mac_info)) | 
|  | return -EPERM; | 
|  |  | 
|  | return vpath_idx; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_xmit | 
|  | * @skb : the socket buffer containing the Tx data. | 
|  | * @dev : device pointer. | 
|  | * | 
|  | * This function is the Tx entry point of the driver. Neterion NIC supports | 
|  | * certain protocol assist features on Tx side, namely  CSO, S/G, LSO. | 
|  | */ | 
|  | static netdev_tx_t | 
|  | vxge_xmit(struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | struct vxge_fifo *fifo = NULL; | 
|  | void *dtr_priv; | 
|  | void *dtr = NULL; | 
|  | struct vxgedev *vdev = NULL; | 
|  | enum vxge_hw_status status; | 
|  | int frg_cnt, first_frg_len; | 
|  | skb_frag_t *frag; | 
|  | int i = 0, j = 0, avail; | 
|  | u64 dma_pointer; | 
|  | struct vxge_tx_priv *txdl_priv = NULL; | 
|  | struct __vxge_hw_fifo *fifo_hw; | 
|  | int offload_type; | 
|  | int vpath_no = 0; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | dev->name, __func__, __LINE__); | 
|  |  | 
|  | /* A buffer with no data will be dropped */ | 
|  | if (unlikely(skb->len <= 0)) { | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: Buffer has no data..", dev->name); | 
|  | dev_kfree_skb(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | vdev = netdev_priv(dev); | 
|  |  | 
|  | if (unlikely(!is_vxge_card_up(vdev))) { | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: vdev not initialized", dev->name); | 
|  | dev_kfree_skb(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | if (vdev->config.addr_learn_en) { | 
|  | vpath_no = vxge_learn_mac(vdev, skb->data + ETH_ALEN); | 
|  | if (vpath_no == -EPERM) { | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: Failed to store the mac address", | 
|  | dev->name); | 
|  | dev_kfree_skb(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) | 
|  | vpath_no = skb_get_queue_mapping(skb); | 
|  | else if (vdev->config.tx_steering_type == TX_PORT_STEERING) | 
|  | vpath_no = vxge_get_vpath_no(vdev, skb); | 
|  |  | 
|  | vxge_debug_tx(VXGE_TRACE, "%s: vpath_no= %d", dev->name, vpath_no); | 
|  |  | 
|  | if (vpath_no >= vdev->no_of_vpath) | 
|  | vpath_no = 0; | 
|  |  | 
|  | fifo = &vdev->vpaths[vpath_no].fifo; | 
|  | fifo_hw = fifo->handle; | 
|  |  | 
|  | if (netif_tx_queue_stopped(fifo->txq)) | 
|  | return NETDEV_TX_BUSY; | 
|  |  | 
|  | avail = vxge_hw_fifo_free_txdl_count_get(fifo_hw); | 
|  | if (avail == 0) { | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: No free TXDs available", dev->name); | 
|  | fifo->stats.txd_not_free++; | 
|  | goto _exit0; | 
|  | } | 
|  |  | 
|  | /* Last TXD?  Stop tx queue to avoid dropping packets.  TX | 
|  | * completion will resume the queue. | 
|  | */ | 
|  | if (avail == 1) | 
|  | netif_tx_stop_queue(fifo->txq); | 
|  |  | 
|  | status = vxge_hw_fifo_txdl_reserve(fifo_hw, &dtr, &dtr_priv); | 
|  | if (unlikely(status != VXGE_HW_OK)) { | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: Out of descriptors .", dev->name); | 
|  | fifo->stats.txd_out_of_desc++; | 
|  | goto _exit0; | 
|  | } | 
|  |  | 
|  | vxge_debug_tx(VXGE_TRACE, | 
|  | "%s: %s:%d fifo_hw = %p dtr = %p dtr_priv = %p", | 
|  | dev->name, __func__, __LINE__, | 
|  | fifo_hw, dtr, dtr_priv); | 
|  |  | 
|  | if (vlan_tx_tag_present(skb)) { | 
|  | u16 vlan_tag = vlan_tx_tag_get(skb); | 
|  | vxge_hw_fifo_txdl_vlan_set(dtr, vlan_tag); | 
|  | } | 
|  |  | 
|  | first_frg_len = skb_headlen(skb); | 
|  |  | 
|  | dma_pointer = pci_map_single(fifo->pdev, skb->data, first_frg_len, | 
|  | PCI_DMA_TODEVICE); | 
|  |  | 
|  | if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) { | 
|  | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | 
|  | fifo->stats.pci_map_fail++; | 
|  | goto _exit0; | 
|  | } | 
|  |  | 
|  | txdl_priv = vxge_hw_fifo_txdl_private_get(dtr); | 
|  | txdl_priv->skb = skb; | 
|  | txdl_priv->dma_buffers[j] = dma_pointer; | 
|  |  | 
|  | frg_cnt = skb_shinfo(skb)->nr_frags; | 
|  | vxge_debug_tx(VXGE_TRACE, | 
|  | "%s: %s:%d skb = %p txdl_priv = %p " | 
|  | "frag_cnt = %d dma_pointer = 0x%llx", dev->name, | 
|  | __func__, __LINE__, skb, txdl_priv, | 
|  | frg_cnt, (unsigned long long)dma_pointer); | 
|  |  | 
|  | vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer, | 
|  | first_frg_len); | 
|  |  | 
|  | frag = &skb_shinfo(skb)->frags[0]; | 
|  | for (i = 0; i < frg_cnt; i++) { | 
|  | /* ignore 0 length fragment */ | 
|  | if (!frag->size) | 
|  | continue; | 
|  |  | 
|  | dma_pointer = (u64) pci_map_page(fifo->pdev, frag->page, | 
|  | frag->page_offset, frag->size, | 
|  | PCI_DMA_TODEVICE); | 
|  |  | 
|  | if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) | 
|  | goto _exit2; | 
|  | vxge_debug_tx(VXGE_TRACE, | 
|  | "%s: %s:%d frag = %d dma_pointer = 0x%llx", | 
|  | dev->name, __func__, __LINE__, i, | 
|  | (unsigned long long)dma_pointer); | 
|  |  | 
|  | txdl_priv->dma_buffers[j] = dma_pointer; | 
|  | vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer, | 
|  | frag->size); | 
|  | frag += 1; | 
|  | } | 
|  |  | 
|  | offload_type = vxge_offload_type(skb); | 
|  |  | 
|  | if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { | 
|  | int mss = vxge_tcp_mss(skb); | 
|  | if (mss) { | 
|  | vxge_debug_tx(VXGE_TRACE, "%s: %s:%d mss = %d", | 
|  | dev->name, __func__, __LINE__, mss); | 
|  | vxge_hw_fifo_txdl_mss_set(dtr, mss); | 
|  | } else { | 
|  | vxge_assert(skb->len <= | 
|  | dev->mtu + VXGE_HW_MAC_HEADER_MAX_SIZE); | 
|  | vxge_assert(0); | 
|  | goto _exit1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (skb->ip_summed == CHECKSUM_PARTIAL) | 
|  | vxge_hw_fifo_txdl_cksum_set_bits(dtr, | 
|  | VXGE_HW_FIFO_TXD_TX_CKO_IPV4_EN | | 
|  | VXGE_HW_FIFO_TXD_TX_CKO_TCP_EN | | 
|  | VXGE_HW_FIFO_TXD_TX_CKO_UDP_EN); | 
|  |  | 
|  | vxge_hw_fifo_txdl_post(fifo_hw, dtr); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...", | 
|  | dev->name, __func__, __LINE__); | 
|  | return NETDEV_TX_OK; | 
|  |  | 
|  | _exit2: | 
|  | vxge_debug_tx(VXGE_TRACE, "%s: pci_map_page failed", dev->name); | 
|  | _exit1: | 
|  | j = 0; | 
|  | frag = &skb_shinfo(skb)->frags[0]; | 
|  |  | 
|  | pci_unmap_single(fifo->pdev, txdl_priv->dma_buffers[j++], | 
|  | skb_headlen(skb), PCI_DMA_TODEVICE); | 
|  |  | 
|  | for (; j < i; j++) { | 
|  | pci_unmap_page(fifo->pdev, txdl_priv->dma_buffers[j], | 
|  | frag->size, PCI_DMA_TODEVICE); | 
|  | frag += 1; | 
|  | } | 
|  |  | 
|  | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | 
|  | _exit0: | 
|  | netif_tx_stop_queue(fifo->txq); | 
|  | dev_kfree_skb(skb); | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_rx_term | 
|  | * | 
|  | * Function will be called by hw function to abort all outstanding receive | 
|  | * descriptors. | 
|  | */ | 
|  | static void | 
|  | vxge_rx_term(void *dtrh, enum vxge_hw_rxd_state state, void *userdata) | 
|  | { | 
|  | struct vxge_ring *ring = (struct vxge_ring *)userdata; | 
|  | struct vxge_rx_priv *rx_priv = | 
|  | vxge_hw_ring_rxd_private_get(dtrh); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  | if (state != VXGE_HW_RXD_STATE_POSTED) | 
|  | return; | 
|  |  | 
|  | pci_unmap_single(ring->pdev, rx_priv->data_dma, | 
|  | rx_priv->data_size, PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | dev_kfree_skb(rx_priv->skb); | 
|  | rx_priv->skb_data = NULL; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d  Exiting...", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_tx_term | 
|  | * | 
|  | * Function will be called to abort all outstanding tx descriptors | 
|  | */ | 
|  | static void | 
|  | vxge_tx_term(void *dtrh, enum vxge_hw_txdl_state state, void *userdata) | 
|  | { | 
|  | struct vxge_fifo *fifo = (struct vxge_fifo *)userdata; | 
|  | skb_frag_t *frag; | 
|  | int i = 0, j, frg_cnt; | 
|  | struct vxge_tx_priv *txd_priv = vxge_hw_fifo_txdl_private_get(dtrh); | 
|  | struct sk_buff *skb = txd_priv->skb; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | if (state != VXGE_HW_TXDL_STATE_POSTED) | 
|  | return; | 
|  |  | 
|  | /* check skb validity */ | 
|  | vxge_assert(skb); | 
|  | frg_cnt = skb_shinfo(skb)->nr_frags; | 
|  | frag = &skb_shinfo(skb)->frags[0]; | 
|  |  | 
|  | /*  for unfragmented skb */ | 
|  | pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++], | 
|  | skb_headlen(skb), PCI_DMA_TODEVICE); | 
|  |  | 
|  | for (j = 0; j < frg_cnt; j++) { | 
|  | pci_unmap_page(fifo->pdev, txd_priv->dma_buffers[i++], | 
|  | frag->size, PCI_DMA_TODEVICE); | 
|  | frag += 1; | 
|  | } | 
|  |  | 
|  | dev_kfree_skb(skb); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | static int vxge_mac_list_del(struct vxge_vpath *vpath, struct macInfo *mac) | 
|  | { | 
|  | struct list_head *entry, *next; | 
|  | u64 del_mac = 0; | 
|  | u8 *mac_address = (u8 *) (&del_mac); | 
|  |  | 
|  | /* Copy the mac address to delete from the list */ | 
|  | memcpy(mac_address, mac->macaddr, ETH_ALEN); | 
|  |  | 
|  | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | 
|  | if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) { | 
|  | list_del(entry); | 
|  | kfree((struct vxge_mac_addrs *)entry); | 
|  | vpath->mac_addr_cnt--; | 
|  |  | 
|  | /* Is this a multicast address */ | 
|  | if (0x01 & mac->macaddr[0]) | 
|  | vpath->mcast_addr_cnt--; | 
|  | return TRUE; | 
|  | } | 
|  | } | 
|  |  | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | /* delete a mac address from DA table */ | 
|  | static enum vxge_hw_status | 
|  | vxge_del_mac_addr(struct vxgedev *vdev, struct macInfo *mac) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxge_vpath *vpath; | 
|  |  | 
|  | vpath = &vdev->vpaths[mac->vpath_no]; | 
|  | status = vxge_hw_vpath_mac_addr_delete(vpath->handle, mac->macaddr, | 
|  | mac->macmask); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "DA config delete entry failed for vpath:%d", | 
|  | vpath->device_id); | 
|  | } else | 
|  | vxge_mac_list_del(vpath, mac); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_set_multicast | 
|  | * @dev: pointer to the device structure | 
|  | * | 
|  | * Entry point for multicast address enable/disable | 
|  | * This function is a driver entry point which gets called by the kernel | 
|  | * whenever multicast addresses must be enabled/disabled. This also gets | 
|  | * called to set/reset promiscuous mode. Depending on the deivce flag, we | 
|  | * determine, if multicast address must be enabled or if promiscuous mode | 
|  | * is to be disabled etc. | 
|  | */ | 
|  | static void vxge_set_multicast(struct net_device *dev) | 
|  | { | 
|  | struct netdev_hw_addr *ha; | 
|  | struct vxgedev *vdev; | 
|  | int i, mcast_cnt = 0; | 
|  | struct __vxge_hw_device *hldev; | 
|  | struct vxge_vpath *vpath; | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct macInfo mac_info; | 
|  | int vpath_idx = 0; | 
|  | struct vxge_mac_addrs *mac_entry; | 
|  | struct list_head *list_head; | 
|  | struct list_head *entry, *next; | 
|  | u8 *mac_address = NULL; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | vdev = netdev_priv(dev); | 
|  | hldev = (struct __vxge_hw_device  *)vdev->devh; | 
|  |  | 
|  | if (unlikely(!is_vxge_card_up(vdev))) | 
|  | return; | 
|  |  | 
|  | if ((dev->flags & IFF_ALLMULTI) && (!vdev->all_multi_flg)) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  | vxge_assert(vpath->is_open); | 
|  | status = vxge_hw_vpath_mcast_enable(vpath->handle); | 
|  | if (status != VXGE_HW_OK) | 
|  | vxge_debug_init(VXGE_ERR, "failed to enable " | 
|  | "multicast, status %d", status); | 
|  | vdev->all_multi_flg = 1; | 
|  | } | 
|  | } else if (!(dev->flags & IFF_ALLMULTI) && (vdev->all_multi_flg)) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  | vxge_assert(vpath->is_open); | 
|  | status = vxge_hw_vpath_mcast_disable(vpath->handle); | 
|  | if (status != VXGE_HW_OK) | 
|  | vxge_debug_init(VXGE_ERR, "failed to disable " | 
|  | "multicast, status %d", status); | 
|  | vdev->all_multi_flg = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | if (!vdev->config.addr_learn_en) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  | vxge_assert(vpath->is_open); | 
|  |  | 
|  | if (dev->flags & IFF_PROMISC) | 
|  | status = vxge_hw_vpath_promisc_enable( | 
|  | vpath->handle); | 
|  | else | 
|  | status = vxge_hw_vpath_promisc_disable( | 
|  | vpath->handle); | 
|  | if (status != VXGE_HW_OK) | 
|  | vxge_debug_init(VXGE_ERR, "failed to %s promisc" | 
|  | ", status %d", dev->flags&IFF_PROMISC ? | 
|  | "enable" : "disable", status); | 
|  | } | 
|  | } | 
|  |  | 
|  | memset(&mac_info, 0, sizeof(struct macInfo)); | 
|  | /* Update individual M_CAST address list */ | 
|  | if ((!vdev->all_multi_flg) && netdev_mc_count(dev)) { | 
|  | mcast_cnt = vdev->vpaths[0].mcast_addr_cnt; | 
|  | list_head = &vdev->vpaths[0].mac_addr_list; | 
|  | if ((netdev_mc_count(dev) + | 
|  | (vdev->vpaths[0].mac_addr_cnt - mcast_cnt)) > | 
|  | vdev->vpaths[0].max_mac_addr_cnt) | 
|  | goto _set_all_mcast; | 
|  |  | 
|  | /* Delete previous MC's */ | 
|  | for (i = 0; i < mcast_cnt; i++) { | 
|  | list_for_each_safe(entry, next, list_head) { | 
|  | mac_entry = (struct vxge_mac_addrs *)entry; | 
|  | /* Copy the mac address to delete */ | 
|  | mac_address = (u8 *)&mac_entry->macaddr; | 
|  | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | 
|  |  | 
|  | /* Is this a multicast address */ | 
|  | if (0x01 & mac_info.macaddr[0]) { | 
|  | for (vpath_idx = 0; vpath_idx < | 
|  | vdev->no_of_vpath; | 
|  | vpath_idx++) { | 
|  | mac_info.vpath_no = vpath_idx; | 
|  | status = vxge_del_mac_addr( | 
|  | vdev, | 
|  | &mac_info); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Add new ones */ | 
|  | netdev_for_each_mc_addr(ha, dev) { | 
|  | memcpy(mac_info.macaddr, ha->addr, ETH_ALEN); | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; | 
|  | vpath_idx++) { | 
|  | mac_info.vpath_no = vpath_idx; | 
|  | mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | 
|  | status = vxge_add_mac_addr(vdev, &mac_info); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s:%d Setting individual" | 
|  | "multicast address failed", | 
|  | __func__, __LINE__); | 
|  | goto _set_all_mcast; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return; | 
|  | _set_all_mcast: | 
|  | mcast_cnt = vdev->vpaths[0].mcast_addr_cnt; | 
|  | /* Delete previous MC's */ | 
|  | for (i = 0; i < mcast_cnt; i++) { | 
|  | list_for_each_safe(entry, next, list_head) { | 
|  | mac_entry = (struct vxge_mac_addrs *)entry; | 
|  | /* Copy the mac address to delete */ | 
|  | mac_address = (u8 *)&mac_entry->macaddr; | 
|  | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | 
|  |  | 
|  | /* Is this a multicast address */ | 
|  | if (0x01 & mac_info.macaddr[0]) | 
|  | break; | 
|  | } | 
|  |  | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; | 
|  | vpath_idx++) { | 
|  | mac_info.vpath_no = vpath_idx; | 
|  | status = vxge_del_mac_addr(vdev, &mac_info); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Enable all multicast */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  | vxge_assert(vpath->is_open); | 
|  |  | 
|  | status = vxge_hw_vpath_mcast_enable(vpath->handle); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s:%d Enabling all multicasts failed", | 
|  | __func__, __LINE__); | 
|  | } | 
|  | vdev->all_multi_flg = 1; | 
|  | } | 
|  | dev->flags |= IFF_ALLMULTI; | 
|  | } | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_set_mac_addr | 
|  | * @dev: pointer to the device structure | 
|  | * | 
|  | * Update entry "0" (default MAC addr) | 
|  | */ | 
|  | static int vxge_set_mac_addr(struct net_device *dev, void *p) | 
|  | { | 
|  | struct sockaddr *addr = p; | 
|  | struct vxgedev *vdev; | 
|  | struct __vxge_hw_device *hldev; | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct macInfo mac_info_new, mac_info_old; | 
|  | int vpath_idx = 0; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | vdev = netdev_priv(dev); | 
|  | hldev = vdev->devh; | 
|  |  | 
|  | if (!is_valid_ether_addr(addr->sa_data)) | 
|  | return -EINVAL; | 
|  |  | 
|  | memset(&mac_info_new, 0, sizeof(struct macInfo)); | 
|  | memset(&mac_info_old, 0, sizeof(struct macInfo)); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d  Exiting...", | 
|  | __func__, __LINE__); | 
|  |  | 
|  | /* Get the old address */ | 
|  | memcpy(mac_info_old.macaddr, dev->dev_addr, dev->addr_len); | 
|  |  | 
|  | /* Copy the new address */ | 
|  | memcpy(mac_info_new.macaddr, addr->sa_data, dev->addr_len); | 
|  |  | 
|  | /* First delete the old mac address from all the vpaths | 
|  | as we can't specify the index while adding new mac address */ | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
|  | struct vxge_vpath *vpath = &vdev->vpaths[vpath_idx]; | 
|  | if (!vpath->is_open) { | 
|  | /* This can happen when this interface is added/removed | 
|  | to the bonding interface. Delete this station address | 
|  | from the linked list */ | 
|  | vxge_mac_list_del(vpath, &mac_info_old); | 
|  |  | 
|  | /* Add this new address to the linked list | 
|  | for later restoring */ | 
|  | vxge_mac_list_add(vpath, &mac_info_new); | 
|  |  | 
|  | continue; | 
|  | } | 
|  | /* Delete the station address */ | 
|  | mac_info_old.vpath_no = vpath_idx; | 
|  | status = vxge_del_mac_addr(vdev, &mac_info_old); | 
|  | } | 
|  |  | 
|  | if (unlikely(!is_vxge_card_up(vdev))) { | 
|  | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | 
|  | return VXGE_HW_OK; | 
|  | } | 
|  |  | 
|  | /* Set this mac address to all the vpaths */ | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
|  | mac_info_new.vpath_no = vpath_idx; | 
|  | mac_info_new.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | 
|  | status = vxge_add_mac_addr(vdev, &mac_info_new); | 
|  | if (status != VXGE_HW_OK) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_vpath_intr_enable | 
|  | * @vdev: pointer to vdev | 
|  | * @vp_id: vpath for which to enable the interrupts | 
|  | * | 
|  | * Enables the interrupts for the vpath | 
|  | */ | 
|  | static void vxge_vpath_intr_enable(struct vxgedev *vdev, int vp_id) | 
|  | { | 
|  | struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | 
|  | int msix_id = 0; | 
|  | int tim_msix_id[4] = {0, 1, 0, 0}; | 
|  | int alarm_msix_id = VXGE_ALARM_MSIX_ID; | 
|  |  | 
|  | vxge_hw_vpath_intr_enable(vpath->handle); | 
|  |  | 
|  | if (vdev->config.intr_type == INTA) | 
|  | vxge_hw_vpath_inta_unmask_tx_rx(vpath->handle); | 
|  | else { | 
|  | vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id, | 
|  | alarm_msix_id); | 
|  |  | 
|  | msix_id = vpath->device_id * VXGE_HW_VPATH_MSIX_ACTIVE; | 
|  | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id); | 
|  | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id + 1); | 
|  |  | 
|  | /* enable the alarm vector */ | 
|  | msix_id = (vpath->handle->vpath->hldev->first_vp_id * | 
|  | VXGE_HW_VPATH_MSIX_ACTIVE) + alarm_msix_id; | 
|  | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_vpath_intr_disable | 
|  | * @vdev: pointer to vdev | 
|  | * @vp_id: vpath for which to disable the interrupts | 
|  | * | 
|  | * Disables the interrupts for the vpath | 
|  | */ | 
|  | static void vxge_vpath_intr_disable(struct vxgedev *vdev, int vp_id) | 
|  | { | 
|  | struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | 
|  | struct __vxge_hw_device *hldev; | 
|  | int msix_id; | 
|  |  | 
|  | hldev = pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | vxge_hw_vpath_wait_receive_idle(hldev, vpath->device_id); | 
|  |  | 
|  | vxge_hw_vpath_intr_disable(vpath->handle); | 
|  |  | 
|  | if (vdev->config.intr_type == INTA) | 
|  | vxge_hw_vpath_inta_mask_tx_rx(vpath->handle); | 
|  | else { | 
|  | msix_id = vpath->device_id * VXGE_HW_VPATH_MSIX_ACTIVE; | 
|  | vxge_hw_vpath_msix_mask(vpath->handle, msix_id); | 
|  | vxge_hw_vpath_msix_mask(vpath->handle, msix_id + 1); | 
|  |  | 
|  | /* disable the alarm vector */ | 
|  | msix_id = (vpath->handle->vpath->hldev->first_vp_id * | 
|  | VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID; | 
|  | vxge_hw_vpath_msix_mask(vpath->handle, msix_id); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* list all mac addresses from DA table */ | 
|  | static enum vxge_hw_status | 
|  | vxge_search_mac_addr_in_da_table(struct vxge_vpath *vpath, struct macInfo *mac) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | unsigned char macmask[ETH_ALEN]; | 
|  | unsigned char macaddr[ETH_ALEN]; | 
|  |  | 
|  | status = vxge_hw_vpath_mac_addr_get(vpath->handle, | 
|  | macaddr, macmask); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "DA config list entry failed for vpath:%d", | 
|  | vpath->device_id); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | while (memcmp(mac->macaddr, macaddr, ETH_ALEN)) { | 
|  | status = vxge_hw_vpath_mac_addr_get_next(vpath->handle, | 
|  | macaddr, macmask); | 
|  | if (status != VXGE_HW_OK) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* Store all mac addresses from the list to the DA table */ | 
|  | static enum vxge_hw_status vxge_restore_vpath_mac_addr(struct vxge_vpath *vpath) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct macInfo mac_info; | 
|  | u8 *mac_address = NULL; | 
|  | struct list_head *entry, *next; | 
|  |  | 
|  | memset(&mac_info, 0, sizeof(struct macInfo)); | 
|  |  | 
|  | if (vpath->is_open) { | 
|  | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | 
|  | mac_address = | 
|  | (u8 *)& | 
|  | ((struct vxge_mac_addrs *)entry)->macaddr; | 
|  | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | 
|  | ((struct vxge_mac_addrs *)entry)->state = | 
|  | VXGE_LL_MAC_ADDR_IN_DA_TABLE; | 
|  | /* does this mac address already exist in da table? */ | 
|  | status = vxge_search_mac_addr_in_da_table(vpath, | 
|  | &mac_info); | 
|  | if (status != VXGE_HW_OK) { | 
|  | /* Add this mac address to the DA table */ | 
|  | status = vxge_hw_vpath_mac_addr_add( | 
|  | vpath->handle, mac_info.macaddr, | 
|  | mac_info.macmask, | 
|  | VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "DA add entry failed for vpath:%d", | 
|  | vpath->device_id); | 
|  | ((struct vxge_mac_addrs *)entry)->state | 
|  | = VXGE_LL_MAC_ADDR_IN_LIST; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* Store all vlan ids from the list to the vid table */ | 
|  | static enum vxge_hw_status | 
|  | vxge_restore_vpath_vid_table(struct vxge_vpath *vpath) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxgedev *vdev = vpath->vdev; | 
|  | u16 vid; | 
|  |  | 
|  | if (vdev->vlgrp && vpath->is_open) { | 
|  |  | 
|  | for (vid = 0; vid < VLAN_N_VID; vid++) { | 
|  | if (!vlan_group_get_device(vdev->vlgrp, vid)) | 
|  | continue; | 
|  | /* Add these vlan to the vid table */ | 
|  | status = vxge_hw_vpath_vid_add(vpath->handle, vid); | 
|  | } | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_reset_vpath | 
|  | * @vdev: pointer to vdev | 
|  | * @vp_id: vpath to reset | 
|  | * | 
|  | * Resets the vpath | 
|  | */ | 
|  | static int vxge_reset_vpath(struct vxgedev *vdev, int vp_id) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | 
|  | int ret = 0; | 
|  |  | 
|  | /* check if device is down already */ | 
|  | if (unlikely(!is_vxge_card_up(vdev))) | 
|  | return 0; | 
|  |  | 
|  | /* is device reset already scheduled */ | 
|  | if (test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | 
|  | return 0; | 
|  |  | 
|  | if (vpath->handle) { | 
|  | if (vxge_hw_vpath_reset(vpath->handle) == VXGE_HW_OK) { | 
|  | if (is_vxge_card_up(vdev) && | 
|  | vxge_hw_vpath_recover_from_reset(vpath->handle) | 
|  | != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_recover_from_reset" | 
|  | "failed for vpath:%d", vp_id); | 
|  | return status; | 
|  | } | 
|  | } else { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_reset failed for" | 
|  | "vpath:%d", vp_id); | 
|  | return status; | 
|  | } | 
|  | } else | 
|  | return VXGE_HW_FAIL; | 
|  |  | 
|  | vxge_restore_vpath_mac_addr(vpath); | 
|  | vxge_restore_vpath_vid_table(vpath); | 
|  |  | 
|  | /* Enable all broadcast */ | 
|  | vxge_hw_vpath_bcast_enable(vpath->handle); | 
|  |  | 
|  | /* Enable all multicast */ | 
|  | if (vdev->all_multi_flg) { | 
|  | status = vxge_hw_vpath_mcast_enable(vpath->handle); | 
|  | if (status != VXGE_HW_OK) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s:%d Enabling multicast failed", | 
|  | __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /* Enable the interrupts */ | 
|  | vxge_vpath_intr_enable(vdev, vp_id); | 
|  |  | 
|  | smp_wmb(); | 
|  |  | 
|  | /* Enable the flow of traffic through the vpath */ | 
|  | vxge_hw_vpath_enable(vpath->handle); | 
|  |  | 
|  | smp_wmb(); | 
|  | vxge_hw_vpath_rx_doorbell_init(vpath->handle); | 
|  | vpath->ring.last_status = VXGE_HW_OK; | 
|  |  | 
|  | /* Vpath reset done */ | 
|  | clear_bit(vp_id, &vdev->vp_reset); | 
|  |  | 
|  | /* Start the vpath queue */ | 
|  | if (netif_tx_queue_stopped(vpath->fifo.txq)) | 
|  | netif_tx_wake_queue(vpath->fifo.txq); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Configure CI */ | 
|  | static void vxge_config_ci_for_tti_rti(struct vxgedev *vdev) | 
|  | { | 
|  | int i = 0; | 
|  |  | 
|  | /* Enable CI for RTI */ | 
|  | if (vdev->config.intr_type == MSI_X) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | struct __vxge_hw_ring *hw_ring; | 
|  |  | 
|  | hw_ring = vdev->vpaths[i].ring.handle; | 
|  | vxge_hw_vpath_dynamic_rti_ci_set(hw_ring); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Enable CI for TTI */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | struct __vxge_hw_fifo *hw_fifo = vdev->vpaths[i].fifo.handle; | 
|  | vxge_hw_vpath_tti_ci_set(hw_fifo); | 
|  | /* | 
|  | * For Inta (with or without napi), Set CI ON for only one | 
|  | * vpath. (Have only one free running timer). | 
|  | */ | 
|  | if ((vdev->config.intr_type == INTA) && (i == 0)) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static int do_vxge_reset(struct vxgedev *vdev, int event) | 
|  | { | 
|  | enum vxge_hw_status status; | 
|  | int ret = 0, vp_id, i; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) { | 
|  | /* check if device is down already */ | 
|  | if (unlikely(!is_vxge_card_up(vdev))) | 
|  | return 0; | 
|  |  | 
|  | /* is reset already scheduled */ | 
|  | if (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (event == VXGE_LL_FULL_RESET) { | 
|  | netif_carrier_off(vdev->ndev); | 
|  |  | 
|  | /* wait for all the vpath reset to complete */ | 
|  | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | 
|  | while (test_bit(vp_id, &vdev->vp_reset)) | 
|  | msleep(50); | 
|  | } | 
|  |  | 
|  | netif_carrier_on(vdev->ndev); | 
|  |  | 
|  | /* if execution mode is set to debug, don't reset the adapter */ | 
|  | if (unlikely(vdev->exec_mode)) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: execution mode is debug, returning..", | 
|  | vdev->ndev->name); | 
|  | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  | netif_tx_stop_all_queues(vdev->ndev); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (event == VXGE_LL_FULL_RESET) { | 
|  | vxge_hw_device_wait_receive_idle(vdev->devh); | 
|  | vxge_hw_device_intr_disable(vdev->devh); | 
|  |  | 
|  | switch (vdev->cric_err_event) { | 
|  | case VXGE_HW_EVENT_UNKNOWN: | 
|  | netif_tx_stop_all_queues(vdev->ndev); | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "fatal: %s: Disabling device due to" | 
|  | "unknown error", | 
|  | vdev->ndev->name); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | case VXGE_HW_EVENT_RESET_START: | 
|  | break; | 
|  | case VXGE_HW_EVENT_RESET_COMPLETE: | 
|  | case VXGE_HW_EVENT_LINK_DOWN: | 
|  | case VXGE_HW_EVENT_LINK_UP: | 
|  | case VXGE_HW_EVENT_ALARM_CLEARED: | 
|  | case VXGE_HW_EVENT_ECCERR: | 
|  | case VXGE_HW_EVENT_MRPCIM_ECCERR: | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | case VXGE_HW_EVENT_FIFO_ERR: | 
|  | case VXGE_HW_EVENT_VPATH_ERR: | 
|  | break; | 
|  | case VXGE_HW_EVENT_CRITICAL_ERR: | 
|  | netif_tx_stop_all_queues(vdev->ndev); | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "fatal: %s: Disabling device due to" | 
|  | "serious error", | 
|  | vdev->ndev->name); | 
|  | /* SOP or device reset required */ | 
|  | /* This event is not currently used */ | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | case VXGE_HW_EVENT_SERR: | 
|  | netif_tx_stop_all_queues(vdev->ndev); | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "fatal: %s: Disabling device due to" | 
|  | "serious error", | 
|  | vdev->ndev->name); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | case VXGE_HW_EVENT_SRPCIM_SERR: | 
|  | case VXGE_HW_EVENT_MRPCIM_SERR: | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | case VXGE_HW_EVENT_SLOT_FREEZE: | 
|  | netif_tx_stop_all_queues(vdev->ndev); | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "fatal: %s: Disabling device due to" | 
|  | "slot freeze", | 
|  | vdev->ndev->name); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | default: | 
|  | break; | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) | 
|  | netif_tx_stop_all_queues(vdev->ndev); | 
|  |  | 
|  | if (event == VXGE_LL_FULL_RESET) { | 
|  | status = vxge_reset_all_vpaths(vdev); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "fatal: %s: can not reset vpaths", | 
|  | vdev->ndev->name); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (event == VXGE_LL_COMPL_RESET) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | if (vdev->vpaths[i].handle) { | 
|  | if (vxge_hw_vpath_recover_from_reset( | 
|  | vdev->vpaths[i].handle) | 
|  | != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_recover_" | 
|  | "from_reset failed for vpath: " | 
|  | "%d", i); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | } | 
|  | } else { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_reset failed for " | 
|  | "vpath:%d", i); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) { | 
|  | /* Reprogram the DA table with populated mac addresses */ | 
|  | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | 
|  | vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]); | 
|  | vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]); | 
|  | } | 
|  |  | 
|  | /* enable vpath interrupts */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | vxge_vpath_intr_enable(vdev, i); | 
|  |  | 
|  | vxge_hw_device_intr_enable(vdev->devh); | 
|  |  | 
|  | smp_wmb(); | 
|  |  | 
|  | /* Indicate card up */ | 
|  | set_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  |  | 
|  | /* Get the traffic to flow through the vpaths */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vxge_hw_vpath_enable(vdev->vpaths[i].handle); | 
|  | smp_wmb(); | 
|  | vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle); | 
|  | } | 
|  |  | 
|  | netif_tx_wake_all_queues(vdev->ndev); | 
|  | } | 
|  |  | 
|  | /* configure CI */ | 
|  | vxge_config_ci_for_tti_rti(vdev); | 
|  |  | 
|  | out: | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  |  | 
|  | /* Indicate reset done */ | 
|  | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) | 
|  | clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_reset | 
|  | * @vdev: pointer to ll device | 
|  | * | 
|  | * driver may reset the chip on events of serr, eccerr, etc | 
|  | */ | 
|  | static void vxge_reset(struct work_struct *work) | 
|  | { | 
|  | struct vxgedev *vdev = container_of(work, struct vxgedev, reset_task); | 
|  |  | 
|  | if (!netif_running(vdev->ndev)) | 
|  | return; | 
|  |  | 
|  | do_vxge_reset(vdev, VXGE_LL_FULL_RESET); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_poll - Receive handler when Receive Polling is used. | 
|  | * @dev: pointer to the device structure. | 
|  | * @budget: Number of packets budgeted to be processed in this iteration. | 
|  | * | 
|  | * This function comes into picture only if Receive side is being handled | 
|  | * through polling (called NAPI in linux). It mostly does what the normal | 
|  | * Rx interrupt handler does in terms of descriptor and packet processing | 
|  | * but not in an interrupt context. Also it will process a specified number | 
|  | * of packets at most in one iteration. This value is passed down by the | 
|  | * kernel as the function argument 'budget'. | 
|  | */ | 
|  | static int vxge_poll_msix(struct napi_struct *napi, int budget) | 
|  | { | 
|  | struct vxge_ring *ring = container_of(napi, struct vxge_ring, napi); | 
|  | int pkts_processed; | 
|  | int budget_org = budget; | 
|  |  | 
|  | ring->budget = budget; | 
|  | ring->pkts_processed = 0; | 
|  | vxge_hw_vpath_poll_rx(ring->handle); | 
|  | pkts_processed = ring->pkts_processed; | 
|  |  | 
|  | if (ring->pkts_processed < budget_org) { | 
|  | napi_complete(napi); | 
|  |  | 
|  | /* Re enable the Rx interrupts for the vpath */ | 
|  | vxge_hw_channel_msix_unmask( | 
|  | (struct __vxge_hw_channel *)ring->handle, | 
|  | ring->rx_vector_no); | 
|  | mmiowb(); | 
|  | } | 
|  |  | 
|  | /* We are copying and returning the local variable, in case if after | 
|  | * clearing the msix interrupt above, if the interrupt fires right | 
|  | * away which can preempt this NAPI thread */ | 
|  | return pkts_processed; | 
|  | } | 
|  |  | 
|  | static int vxge_poll_inta(struct napi_struct *napi, int budget) | 
|  | { | 
|  | struct vxgedev *vdev = container_of(napi, struct vxgedev, napi); | 
|  | int pkts_processed = 0; | 
|  | int i; | 
|  | int budget_org = budget; | 
|  | struct vxge_ring *ring; | 
|  |  | 
|  | struct __vxge_hw_device *hldev = pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | ring = &vdev->vpaths[i].ring; | 
|  | ring->budget = budget; | 
|  | ring->pkts_processed = 0; | 
|  | vxge_hw_vpath_poll_rx(ring->handle); | 
|  | pkts_processed += ring->pkts_processed; | 
|  | budget -= ring->pkts_processed; | 
|  | if (budget <= 0) | 
|  | break; | 
|  | } | 
|  |  | 
|  | VXGE_COMPLETE_ALL_TX(vdev); | 
|  |  | 
|  | if (pkts_processed < budget_org) { | 
|  | napi_complete(napi); | 
|  | /* Re enable the Rx interrupts for the ring */ | 
|  | vxge_hw_device_unmask_all(hldev); | 
|  | vxge_hw_device_flush_io(hldev); | 
|  | } | 
|  |  | 
|  | return pkts_processed; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | /** | 
|  | * vxge_netpoll - netpoll event handler entry point | 
|  | * @dev : pointer to the device structure. | 
|  | * Description: | 
|  | *      This function will be called by upper layer to check for events on the | 
|  | * interface in situations where interrupts are disabled. It is used for | 
|  | * specific in-kernel networking tasks, such as remote consoles and kernel | 
|  | * debugging over the network (example netdump in RedHat). | 
|  | */ | 
|  | static void vxge_netpoll(struct net_device *dev) | 
|  | { | 
|  | struct __vxge_hw_device *hldev; | 
|  | struct vxgedev *vdev; | 
|  |  | 
|  | vdev = netdev_priv(dev); | 
|  | hldev = pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | if (pci_channel_offline(vdev->pdev)) | 
|  | return; | 
|  |  | 
|  | disable_irq(dev->irq); | 
|  | vxge_hw_device_clear_tx_rx(hldev); | 
|  |  | 
|  | vxge_hw_device_clear_tx_rx(hldev); | 
|  | VXGE_COMPLETE_ALL_RX(vdev); | 
|  | VXGE_COMPLETE_ALL_TX(vdev); | 
|  |  | 
|  | enable_irq(dev->irq); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* RTH configuration */ | 
|  | static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxge_hw_rth_hash_types hash_types; | 
|  | u8 itable[256] = {0}; /* indirection table */ | 
|  | u8 mtable[256] = {0}; /* CPU to vpath mapping  */ | 
|  | int index; | 
|  |  | 
|  | /* | 
|  | * Filling | 
|  | * 	- itable with bucket numbers | 
|  | * 	- mtable with bucket-to-vpath mapping | 
|  | */ | 
|  | for (index = 0; index < (1 << vdev->config.rth_bkt_sz); index++) { | 
|  | itable[index] = index; | 
|  | mtable[index] = index % vdev->no_of_vpath; | 
|  | } | 
|  |  | 
|  | /* set indirection table, bucket-to-vpath mapping */ | 
|  | status = vxge_hw_vpath_rts_rth_itable_set(vdev->vp_handles, | 
|  | vdev->no_of_vpath, | 
|  | mtable, itable, | 
|  | vdev->config.rth_bkt_sz); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "RTH indirection table configuration failed " | 
|  | "for vpath:%d", vdev->vpaths[0].device_id); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* Fill RTH hash types */ | 
|  | hash_types.hash_type_tcpipv4_en   = vdev->config.rth_hash_type_tcpipv4; | 
|  | hash_types.hash_type_ipv4_en      = vdev->config.rth_hash_type_ipv4; | 
|  | hash_types.hash_type_tcpipv6_en   = vdev->config.rth_hash_type_tcpipv6; | 
|  | hash_types.hash_type_ipv6_en      = vdev->config.rth_hash_type_ipv6; | 
|  | hash_types.hash_type_tcpipv6ex_en = | 
|  | vdev->config.rth_hash_type_tcpipv6ex; | 
|  | hash_types.hash_type_ipv6ex_en    = vdev->config.rth_hash_type_ipv6ex; | 
|  |  | 
|  | /* | 
|  | * Because the itable_set() method uses the active_table field | 
|  | * for the target virtual path the RTH config should be updated | 
|  | * for all VPATHs. The h/w only uses the lowest numbered VPATH | 
|  | * when steering frames. | 
|  | */ | 
|  | for (index = 0; index < vdev->no_of_vpath; index++) { | 
|  | status = vxge_hw_vpath_rts_rth_set( | 
|  | vdev->vpaths[index].handle, | 
|  | vdev->config.rth_algorithm, | 
|  | &hash_types, | 
|  | vdev->config.rth_bkt_sz); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "RTH configuration failed for vpath:%d", | 
|  | vdev->vpaths[index].device_id); | 
|  | return status; | 
|  | } | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* reset vpaths */ | 
|  | enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxge_vpath *vpath; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  | if (vpath->handle) { | 
|  | if (vxge_hw_vpath_reset(vpath->handle) == VXGE_HW_OK) { | 
|  | if (is_vxge_card_up(vdev) && | 
|  | vxge_hw_vpath_recover_from_reset( | 
|  | vpath->handle) != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_recover_" | 
|  | "from_reset failed for vpath: " | 
|  | "%d", i); | 
|  | return status; | 
|  | } | 
|  | } else { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_reset failed for " | 
|  | "vpath:%d", i); | 
|  | return status; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* close vpaths */ | 
|  | static void vxge_close_vpaths(struct vxgedev *vdev, int index) | 
|  | { | 
|  | struct vxge_vpath *vpath; | 
|  | int i; | 
|  |  | 
|  | for (i = index; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  |  | 
|  | if (vpath->handle && vpath->is_open) { | 
|  | vxge_hw_vpath_close(vpath->handle); | 
|  | vdev->stats.vpaths_open--; | 
|  | } | 
|  | vpath->is_open = 0; | 
|  | vpath->handle = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* open vpaths */ | 
|  | static int vxge_open_vpaths(struct vxgedev *vdev) | 
|  | { | 
|  | struct vxge_hw_vpath_attr attr; | 
|  | enum vxge_hw_status status; | 
|  | struct vxge_vpath *vpath; | 
|  | u32 vp_id = 0; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  | vxge_assert(vpath->is_configured); | 
|  |  | 
|  | if (!vdev->titan1) { | 
|  | struct vxge_hw_vp_config *vcfg; | 
|  | vcfg = &vdev->devh->config.vp_config[vpath->device_id]; | 
|  |  | 
|  | vcfg->rti.urange_a = RTI_T1A_RX_URANGE_A; | 
|  | vcfg->rti.urange_b = RTI_T1A_RX_URANGE_B; | 
|  | vcfg->rti.urange_c = RTI_T1A_RX_URANGE_C; | 
|  | vcfg->tti.uec_a = TTI_T1A_TX_UFC_A; | 
|  | vcfg->tti.uec_b = TTI_T1A_TX_UFC_B; | 
|  | vcfg->tti.uec_c = TTI_T1A_TX_UFC_C(vdev->mtu); | 
|  | vcfg->tti.uec_d = TTI_T1A_TX_UFC_D(vdev->mtu); | 
|  | vcfg->tti.ltimer_val = VXGE_T1A_TTI_LTIMER_VAL; | 
|  | vcfg->tti.rtimer_val = VXGE_T1A_TTI_RTIMER_VAL; | 
|  | } | 
|  |  | 
|  | attr.vp_id = vpath->device_id; | 
|  | attr.fifo_attr.callback = vxge_xmit_compl; | 
|  | attr.fifo_attr.txdl_term = vxge_tx_term; | 
|  | attr.fifo_attr.per_txdl_space = sizeof(struct vxge_tx_priv); | 
|  | attr.fifo_attr.userdata = &vpath->fifo; | 
|  |  | 
|  | attr.ring_attr.callback = vxge_rx_1b_compl; | 
|  | attr.ring_attr.rxd_init = vxge_rx_initial_replenish; | 
|  | attr.ring_attr.rxd_term = vxge_rx_term; | 
|  | attr.ring_attr.per_rxd_space = sizeof(struct vxge_rx_priv); | 
|  | attr.ring_attr.userdata = &vpath->ring; | 
|  |  | 
|  | vpath->ring.ndev = vdev->ndev; | 
|  | vpath->ring.pdev = vdev->pdev; | 
|  |  | 
|  | status = vxge_hw_vpath_open(vdev->devh, &attr, &vpath->handle); | 
|  | if (status == VXGE_HW_OK) { | 
|  | vpath->fifo.handle = | 
|  | (struct __vxge_hw_fifo *)attr.fifo_attr.userdata; | 
|  | vpath->ring.handle = | 
|  | (struct __vxge_hw_ring *)attr.ring_attr.userdata; | 
|  | vpath->fifo.tx_steering_type = | 
|  | vdev->config.tx_steering_type; | 
|  | vpath->fifo.ndev = vdev->ndev; | 
|  | vpath->fifo.pdev = vdev->pdev; | 
|  | if (vdev->config.tx_steering_type) | 
|  | vpath->fifo.txq = | 
|  | netdev_get_tx_queue(vdev->ndev, i); | 
|  | else | 
|  | vpath->fifo.txq = | 
|  | netdev_get_tx_queue(vdev->ndev, 0); | 
|  | vpath->fifo.indicate_max_pkts = | 
|  | vdev->config.fifo_indicate_max_pkts; | 
|  | vpath->fifo.tx_vector_no = 0; | 
|  | vpath->ring.rx_vector_no = 0; | 
|  | vpath->ring.rx_hwts = vdev->rx_hwts; | 
|  | vpath->is_open = 1; | 
|  | vdev->vp_handles[i] = vpath->handle; | 
|  | vpath->ring.vlan_tag_strip = vdev->vlan_tag_strip; | 
|  | vdev->stats.vpaths_open++; | 
|  | } else { | 
|  | vdev->stats.vpath_open_fail++; | 
|  | vxge_debug_init(VXGE_ERR, "%s: vpath: %d failed to " | 
|  | "open with status: %d", | 
|  | vdev->ndev->name, vpath->device_id, | 
|  | status); | 
|  | vxge_close_vpaths(vdev, 0); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | vp_id = vpath->handle->vpath->vp_id; | 
|  | vdev->vpaths_deployed |= vxge_mBIT(vp_id); | 
|  | } | 
|  |  | 
|  | return VXGE_HW_OK; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  adaptive_coalesce_tx_interrupts - Changes the interrupt coalescing | 
|  | *  if the interrupts are not within a range | 
|  | *  @fifo: pointer to transmit fifo structure | 
|  | *  Description: The function changes boundary timer and restriction timer | 
|  | *  value depends on the traffic | 
|  | *  Return Value: None | 
|  | */ | 
|  | static void adaptive_coalesce_tx_interrupts(struct vxge_fifo *fifo) | 
|  | { | 
|  | fifo->interrupt_count++; | 
|  | if (jiffies > fifo->jiffies + HZ / 100) { | 
|  | struct __vxge_hw_fifo *hw_fifo = fifo->handle; | 
|  |  | 
|  | fifo->jiffies = jiffies; | 
|  | if (fifo->interrupt_count > VXGE_T1A_MAX_TX_INTERRUPT_COUNT && | 
|  | hw_fifo->rtimer != VXGE_TTI_RTIMER_ADAPT_VAL) { | 
|  | hw_fifo->rtimer = VXGE_TTI_RTIMER_ADAPT_VAL; | 
|  | vxge_hw_vpath_dynamic_tti_rtimer_set(hw_fifo); | 
|  | } else if (hw_fifo->rtimer != 0) { | 
|  | hw_fifo->rtimer = 0; | 
|  | vxge_hw_vpath_dynamic_tti_rtimer_set(hw_fifo); | 
|  | } | 
|  | fifo->interrupt_count = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  adaptive_coalesce_rx_interrupts - Changes the interrupt coalescing | 
|  | *  if the interrupts are not within a range | 
|  | *  @ring: pointer to receive ring structure | 
|  | *  Description: The function increases of decreases the packet counts within | 
|  | *  the ranges of traffic utilization, if the interrupts due to this ring are | 
|  | *  not within a fixed range. | 
|  | *  Return Value: Nothing | 
|  | */ | 
|  | static void adaptive_coalesce_rx_interrupts(struct vxge_ring *ring) | 
|  | { | 
|  | ring->interrupt_count++; | 
|  | if (jiffies > ring->jiffies + HZ / 100) { | 
|  | struct __vxge_hw_ring *hw_ring = ring->handle; | 
|  |  | 
|  | ring->jiffies = jiffies; | 
|  | if (ring->interrupt_count > VXGE_T1A_MAX_INTERRUPT_COUNT && | 
|  | hw_ring->rtimer != VXGE_RTI_RTIMER_ADAPT_VAL) { | 
|  | hw_ring->rtimer = VXGE_RTI_RTIMER_ADAPT_VAL; | 
|  | vxge_hw_vpath_dynamic_rti_rtimer_set(hw_ring); | 
|  | } else if (hw_ring->rtimer != 0) { | 
|  | hw_ring->rtimer = 0; | 
|  | vxge_hw_vpath_dynamic_rti_rtimer_set(hw_ring); | 
|  | } | 
|  | ring->interrupt_count = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  vxge_isr_napi | 
|  | *  @irq: the irq of the device. | 
|  | *  @dev_id: a void pointer to the hldev structure of the Titan device | 
|  | *  @ptregs: pointer to the registers pushed on the stack. | 
|  | * | 
|  | *  This function is the ISR handler of the device when napi is enabled. It | 
|  | *  identifies the reason for the interrupt and calls the relevant service | 
|  | *  routines. | 
|  | */ | 
|  | static irqreturn_t vxge_isr_napi(int irq, void *dev_id) | 
|  | { | 
|  | struct net_device *dev; | 
|  | struct __vxge_hw_device *hldev; | 
|  | u64 reason; | 
|  | enum vxge_hw_status status; | 
|  | struct vxgedev *vdev = (struct vxgedev *)dev_id; | 
|  |  | 
|  | vxge_debug_intr(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | dev = vdev->ndev; | 
|  | hldev = pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | if (pci_channel_offline(vdev->pdev)) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | if (unlikely(!is_vxge_card_up(vdev))) | 
|  | return IRQ_HANDLED; | 
|  |  | 
|  | status = vxge_hw_device_begin_irq(hldev, vdev->exec_mode, &reason); | 
|  | if (status == VXGE_HW_OK) { | 
|  | vxge_hw_device_mask_all(hldev); | 
|  |  | 
|  | if (reason & | 
|  | VXGE_HW_TITAN_GENERAL_INT_STATUS_VPATH_TRAFFIC_INT( | 
|  | vdev->vpaths_deployed >> | 
|  | (64 - VXGE_HW_MAX_VIRTUAL_PATHS))) { | 
|  |  | 
|  | vxge_hw_device_clear_tx_rx(hldev); | 
|  | napi_schedule(&vdev->napi); | 
|  | vxge_debug_intr(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | return IRQ_HANDLED; | 
|  | } else | 
|  | vxge_hw_device_unmask_all(hldev); | 
|  | } else if (unlikely((status == VXGE_HW_ERR_VPATH) || | 
|  | (status == VXGE_HW_ERR_CRITICAL) || | 
|  | (status == VXGE_HW_ERR_FIFO))) { | 
|  | vxge_hw_device_mask_all(hldev); | 
|  | vxge_hw_device_flush_io(hldev); | 
|  | return IRQ_HANDLED; | 
|  | } else if (unlikely(status == VXGE_HW_ERR_SLOT_FREEZE)) | 
|  | return IRQ_HANDLED; | 
|  |  | 
|  | vxge_debug_intr(VXGE_TRACE, "%s:%d  Exiting...", __func__, __LINE__); | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PCI_MSI | 
|  |  | 
|  | static irqreturn_t vxge_tx_msix_handle(int irq, void *dev_id) | 
|  | { | 
|  | struct vxge_fifo *fifo = (struct vxge_fifo *)dev_id; | 
|  |  | 
|  | adaptive_coalesce_tx_interrupts(fifo); | 
|  |  | 
|  | vxge_hw_channel_msix_mask((struct __vxge_hw_channel *)fifo->handle, | 
|  | fifo->tx_vector_no); | 
|  |  | 
|  | vxge_hw_channel_msix_clear((struct __vxge_hw_channel *)fifo->handle, | 
|  | fifo->tx_vector_no); | 
|  |  | 
|  | VXGE_COMPLETE_VPATH_TX(fifo); | 
|  |  | 
|  | vxge_hw_channel_msix_unmask((struct __vxge_hw_channel *)fifo->handle, | 
|  | fifo->tx_vector_no); | 
|  |  | 
|  | mmiowb(); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static irqreturn_t vxge_rx_msix_napi_handle(int irq, void *dev_id) | 
|  | { | 
|  | struct vxge_ring *ring = (struct vxge_ring *)dev_id; | 
|  |  | 
|  | adaptive_coalesce_rx_interrupts(ring); | 
|  |  | 
|  | vxge_hw_channel_msix_mask((struct __vxge_hw_channel *)ring->handle, | 
|  | ring->rx_vector_no); | 
|  |  | 
|  | vxge_hw_channel_msix_clear((struct __vxge_hw_channel *)ring->handle, | 
|  | ring->rx_vector_no); | 
|  |  | 
|  | napi_schedule(&ring->napi); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static irqreturn_t | 
|  | vxge_alarm_msix_handle(int irq, void *dev_id) | 
|  | { | 
|  | int i; | 
|  | enum vxge_hw_status status; | 
|  | struct vxge_vpath *vpath = (struct vxge_vpath *)dev_id; | 
|  | struct vxgedev *vdev = vpath->vdev; | 
|  | int msix_id = (vpath->handle->vpath->vp_id * | 
|  | VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID; | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | /* Reduce the chance of losing alarm interrupts by masking | 
|  | * the vector. A pending bit will be set if an alarm is | 
|  | * generated and on unmask the interrupt will be fired. | 
|  | */ | 
|  | vxge_hw_vpath_msix_mask(vdev->vpaths[i].handle, msix_id); | 
|  | vxge_hw_vpath_msix_clear(vdev->vpaths[i].handle, msix_id); | 
|  | mmiowb(); | 
|  |  | 
|  | status = vxge_hw_vpath_alarm_process(vdev->vpaths[i].handle, | 
|  | vdev->exec_mode); | 
|  | if (status == VXGE_HW_OK) { | 
|  | vxge_hw_vpath_msix_unmask(vdev->vpaths[i].handle, | 
|  | msix_id); | 
|  | mmiowb(); | 
|  | continue; | 
|  | } | 
|  | vxge_debug_intr(VXGE_ERR, | 
|  | "%s: vxge_hw_vpath_alarm_process failed %x ", | 
|  | VXGE_DRIVER_NAME, status); | 
|  | } | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int vxge_alloc_msix(struct vxgedev *vdev) | 
|  | { | 
|  | int j, i, ret = 0; | 
|  | int msix_intr_vect = 0, temp; | 
|  | vdev->intr_cnt = 0; | 
|  |  | 
|  | start: | 
|  | /* Tx/Rx MSIX Vectors count */ | 
|  | vdev->intr_cnt = vdev->no_of_vpath * 2; | 
|  |  | 
|  | /* Alarm MSIX Vectors count */ | 
|  | vdev->intr_cnt++; | 
|  |  | 
|  | vdev->entries = kcalloc(vdev->intr_cnt, sizeof(struct msix_entry), | 
|  | GFP_KERNEL); | 
|  | if (!vdev->entries) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: memory allocation failed", | 
|  | VXGE_DRIVER_NAME); | 
|  | ret = -ENOMEM; | 
|  | goto alloc_entries_failed; | 
|  | } | 
|  |  | 
|  | vdev->vxge_entries = kcalloc(vdev->intr_cnt, | 
|  | sizeof(struct vxge_msix_entry), | 
|  | GFP_KERNEL); | 
|  | if (!vdev->vxge_entries) { | 
|  | vxge_debug_init(VXGE_ERR, "%s: memory allocation failed", | 
|  | VXGE_DRIVER_NAME); | 
|  | ret = -ENOMEM; | 
|  | goto alloc_vxge_entries_failed; | 
|  | } | 
|  |  | 
|  | for (i = 0, j = 0; i < vdev->no_of_vpath; i++) { | 
|  |  | 
|  | msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE; | 
|  |  | 
|  | /* Initialize the fifo vector */ | 
|  | vdev->entries[j].entry = msix_intr_vect; | 
|  | vdev->vxge_entries[j].entry = msix_intr_vect; | 
|  | vdev->vxge_entries[j].in_use = 0; | 
|  | j++; | 
|  |  | 
|  | /* Initialize the ring vector */ | 
|  | vdev->entries[j].entry = msix_intr_vect + 1; | 
|  | vdev->vxge_entries[j].entry = msix_intr_vect + 1; | 
|  | vdev->vxge_entries[j].in_use = 0; | 
|  | j++; | 
|  | } | 
|  |  | 
|  | /* Initialize the alarm vector */ | 
|  | vdev->entries[j].entry = VXGE_ALARM_MSIX_ID; | 
|  | vdev->vxge_entries[j].entry = VXGE_ALARM_MSIX_ID; | 
|  | vdev->vxge_entries[j].in_use = 0; | 
|  |  | 
|  | ret = pci_enable_msix(vdev->pdev, vdev->entries, vdev->intr_cnt); | 
|  | if (ret > 0) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: MSI-X enable failed for %d vectors, ret: %d", | 
|  | VXGE_DRIVER_NAME, vdev->intr_cnt, ret); | 
|  | if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) { | 
|  | ret = -ENODEV; | 
|  | goto enable_msix_failed; | 
|  | } | 
|  |  | 
|  | kfree(vdev->entries); | 
|  | kfree(vdev->vxge_entries); | 
|  | vdev->entries = NULL; | 
|  | vdev->vxge_entries = NULL; | 
|  | /* Try with less no of vector by reducing no of vpaths count */ | 
|  | temp = (ret - 1)/2; | 
|  | vxge_close_vpaths(vdev, temp); | 
|  | vdev->no_of_vpath = temp; | 
|  | goto start; | 
|  | } else if (ret < 0) { | 
|  | ret = -ENODEV; | 
|  | goto enable_msix_failed; | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | enable_msix_failed: | 
|  | kfree(vdev->vxge_entries); | 
|  | alloc_vxge_entries_failed: | 
|  | kfree(vdev->entries); | 
|  | alloc_entries_failed: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int vxge_enable_msix(struct vxgedev *vdev) | 
|  | { | 
|  |  | 
|  | int i, ret = 0; | 
|  | /* 0 - Tx, 1 - Rx  */ | 
|  | int tim_msix_id[4] = {0, 1, 0, 0}; | 
|  |  | 
|  | vdev->intr_cnt = 0; | 
|  |  | 
|  | /* allocate msix vectors */ | 
|  | ret = vxge_alloc_msix(vdev); | 
|  | if (!ret) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | struct vxge_vpath *vpath = &vdev->vpaths[i]; | 
|  |  | 
|  | /* If fifo or ring are not enabled, the MSIX vector for | 
|  | * it should be set to 0. | 
|  | */ | 
|  | vpath->ring.rx_vector_no = (vpath->device_id * | 
|  | VXGE_HW_VPATH_MSIX_ACTIVE) + 1; | 
|  |  | 
|  | vpath->fifo.tx_vector_no = (vpath->device_id * | 
|  | VXGE_HW_VPATH_MSIX_ACTIVE); | 
|  |  | 
|  | vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id, | 
|  | VXGE_ALARM_MSIX_ID); | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void vxge_rem_msix_isr(struct vxgedev *vdev) | 
|  | { | 
|  | int intr_cnt; | 
|  |  | 
|  | for (intr_cnt = 0; intr_cnt < (vdev->no_of_vpath * 2 + 1); | 
|  | intr_cnt++) { | 
|  | if (vdev->vxge_entries[intr_cnt].in_use) { | 
|  | synchronize_irq(vdev->entries[intr_cnt].vector); | 
|  | free_irq(vdev->entries[intr_cnt].vector, | 
|  | vdev->vxge_entries[intr_cnt].arg); | 
|  | vdev->vxge_entries[intr_cnt].in_use = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | kfree(vdev->entries); | 
|  | kfree(vdev->vxge_entries); | 
|  | vdev->entries = NULL; | 
|  | vdev->vxge_entries = NULL; | 
|  |  | 
|  | if (vdev->config.intr_type == MSI_X) | 
|  | pci_disable_msix(vdev->pdev); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void vxge_rem_isr(struct vxgedev *vdev) | 
|  | { | 
|  | struct __vxge_hw_device *hldev; | 
|  | hldev = pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | #ifdef CONFIG_PCI_MSI | 
|  | if (vdev->config.intr_type == MSI_X) { | 
|  | vxge_rem_msix_isr(vdev); | 
|  | } else | 
|  | #endif | 
|  | if (vdev->config.intr_type == INTA) { | 
|  | synchronize_irq(vdev->pdev->irq); | 
|  | free_irq(vdev->pdev->irq, vdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int vxge_add_isr(struct vxgedev *vdev) | 
|  | { | 
|  | int ret = 0; | 
|  | #ifdef CONFIG_PCI_MSI | 
|  | int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0; | 
|  | int pci_fun = PCI_FUNC(vdev->pdev->devfn); | 
|  |  | 
|  | if (vdev->config.intr_type == MSI_X) | 
|  | ret = vxge_enable_msix(vdev); | 
|  |  | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Enabling MSI-X Failed", VXGE_DRIVER_NAME); | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Defaulting to INTA", VXGE_DRIVER_NAME); | 
|  | vdev->config.intr_type = INTA; | 
|  | } | 
|  |  | 
|  | if (vdev->config.intr_type == MSI_X) { | 
|  | for (intr_idx = 0; | 
|  | intr_idx < (vdev->no_of_vpath * | 
|  | VXGE_HW_VPATH_MSIX_ACTIVE); intr_idx++) { | 
|  |  | 
|  | msix_idx = intr_idx % VXGE_HW_VPATH_MSIX_ACTIVE; | 
|  | irq_req = 0; | 
|  |  | 
|  | switch (msix_idx) { | 
|  | case 0: | 
|  | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | 
|  | "%s:vxge:MSI-X %d - Tx - fn:%d vpath:%d", | 
|  | vdev->ndev->name, | 
|  | vdev->entries[intr_cnt].entry, | 
|  | pci_fun, vp_idx); | 
|  | ret = request_irq( | 
|  | vdev->entries[intr_cnt].vector, | 
|  | vxge_tx_msix_handle, 0, | 
|  | vdev->desc[intr_cnt], | 
|  | &vdev->vpaths[vp_idx].fifo); | 
|  | vdev->vxge_entries[intr_cnt].arg = | 
|  | &vdev->vpaths[vp_idx].fifo; | 
|  | irq_req = 1; | 
|  | break; | 
|  | case 1: | 
|  | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | 
|  | "%s:vxge:MSI-X %d - Rx - fn:%d vpath:%d", | 
|  | vdev->ndev->name, | 
|  | vdev->entries[intr_cnt].entry, | 
|  | pci_fun, vp_idx); | 
|  | ret = request_irq( | 
|  | vdev->entries[intr_cnt].vector, | 
|  | vxge_rx_msix_napi_handle, | 
|  | 0, | 
|  | vdev->desc[intr_cnt], | 
|  | &vdev->vpaths[vp_idx].ring); | 
|  | vdev->vxge_entries[intr_cnt].arg = | 
|  | &vdev->vpaths[vp_idx].ring; | 
|  | irq_req = 1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: MSIX - %d  Registration failed", | 
|  | vdev->ndev->name, intr_cnt); | 
|  | vxge_rem_msix_isr(vdev); | 
|  | vdev->config.intr_type = INTA; | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Defaulting to INTA" | 
|  | , vdev->ndev->name); | 
|  | goto INTA_MODE; | 
|  | } | 
|  |  | 
|  | if (irq_req) { | 
|  | /* We requested for this msix interrupt */ | 
|  | vdev->vxge_entries[intr_cnt].in_use = 1; | 
|  | msix_idx +=  vdev->vpaths[vp_idx].device_id * | 
|  | VXGE_HW_VPATH_MSIX_ACTIVE; | 
|  | vxge_hw_vpath_msix_unmask( | 
|  | vdev->vpaths[vp_idx].handle, | 
|  | msix_idx); | 
|  | intr_cnt++; | 
|  | } | 
|  |  | 
|  | /* Point to next vpath handler */ | 
|  | if (((intr_idx + 1) % VXGE_HW_VPATH_MSIX_ACTIVE == 0) && | 
|  | (vp_idx < (vdev->no_of_vpath - 1))) | 
|  | vp_idx++; | 
|  | } | 
|  |  | 
|  | intr_cnt = vdev->no_of_vpath * 2; | 
|  | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | 
|  | "%s:vxge:MSI-X %d - Alarm - fn:%d", | 
|  | vdev->ndev->name, | 
|  | vdev->entries[intr_cnt].entry, | 
|  | pci_fun); | 
|  | /* For Alarm interrupts */ | 
|  | ret = request_irq(vdev->entries[intr_cnt].vector, | 
|  | vxge_alarm_msix_handle, 0, | 
|  | vdev->desc[intr_cnt], | 
|  | &vdev->vpaths[0]); | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: MSIX - %d Registration failed", | 
|  | vdev->ndev->name, intr_cnt); | 
|  | vxge_rem_msix_isr(vdev); | 
|  | vdev->config.intr_type = INTA; | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Defaulting to INTA", | 
|  | vdev->ndev->name); | 
|  | goto INTA_MODE; | 
|  | } | 
|  |  | 
|  | msix_idx = (vdev->vpaths[0].handle->vpath->vp_id * | 
|  | VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID; | 
|  | vxge_hw_vpath_msix_unmask(vdev->vpaths[vp_idx].handle, | 
|  | msix_idx); | 
|  | vdev->vxge_entries[intr_cnt].in_use = 1; | 
|  | vdev->vxge_entries[intr_cnt].arg = &vdev->vpaths[0]; | 
|  | } | 
|  | INTA_MODE: | 
|  | #endif | 
|  |  | 
|  | if (vdev->config.intr_type == INTA) { | 
|  | snprintf(vdev->desc[0], VXGE_INTR_STRLEN, | 
|  | "%s:vxge:INTA", vdev->ndev->name); | 
|  | vxge_hw_device_set_intr_type(vdev->devh, | 
|  | VXGE_HW_INTR_MODE_IRQLINE); | 
|  |  | 
|  | vxge_hw_vpath_tti_ci_set(vdev->vpaths[0].fifo.handle); | 
|  |  | 
|  | ret = request_irq((int) vdev->pdev->irq, | 
|  | vxge_isr_napi, | 
|  | IRQF_SHARED, vdev->desc[0], vdev); | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s %s-%d: ISR registration failed", | 
|  | VXGE_DRIVER_NAME, "IRQ", vdev->pdev->irq); | 
|  | return -ENODEV; | 
|  | } | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "new %s-%d line allocated", | 
|  | "IRQ", vdev->pdev->irq); | 
|  | } | 
|  |  | 
|  | return VXGE_HW_OK; | 
|  | } | 
|  |  | 
|  | static void vxge_poll_vp_reset(unsigned long data) | 
|  | { | 
|  | struct vxgedev *vdev = (struct vxgedev *)data; | 
|  | int i, j = 0; | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | if (test_bit(i, &vdev->vp_reset)) { | 
|  | vxge_reset_vpath(vdev, i); | 
|  | j++; | 
|  | } | 
|  | } | 
|  | if (j && (vdev->config.intr_type != MSI_X)) { | 
|  | vxge_hw_device_unmask_all(vdev->devh); | 
|  | vxge_hw_device_flush_io(vdev->devh); | 
|  | } | 
|  |  | 
|  | mod_timer(&vdev->vp_reset_timer, jiffies + HZ / 2); | 
|  | } | 
|  |  | 
|  | static void vxge_poll_vp_lockup(unsigned long data) | 
|  | { | 
|  | struct vxgedev *vdev = (struct vxgedev *)data; | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxge_vpath *vpath; | 
|  | struct vxge_ring *ring; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | ring = &vdev->vpaths[i].ring; | 
|  | /* Did this vpath received any packets */ | 
|  | if (ring->stats.prev_rx_frms == ring->stats.rx_frms) { | 
|  | status = vxge_hw_vpath_check_leak(ring->handle); | 
|  |  | 
|  | /* Did it received any packets last time */ | 
|  | if ((VXGE_HW_FAIL == status) && | 
|  | (VXGE_HW_FAIL == ring->last_status)) { | 
|  |  | 
|  | /* schedule vpath reset */ | 
|  | if (!test_and_set_bit(i, &vdev->vp_reset)) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  |  | 
|  | /* disable interrupts for this vpath */ | 
|  | vxge_vpath_intr_disable(vdev, i); | 
|  |  | 
|  | /* stop the queue for this vpath */ | 
|  | netif_tx_stop_queue(vpath->fifo.txq); | 
|  | continue; | 
|  | } | 
|  | } | 
|  | } | 
|  | ring->stats.prev_rx_frms = ring->stats.rx_frms; | 
|  | ring->last_status = status; | 
|  | } | 
|  |  | 
|  | /* Check every 1 milli second */ | 
|  | mod_timer(&vdev->vp_lockup_timer, jiffies + HZ / 1000); | 
|  | } | 
|  |  | 
|  | static u32 vxge_fix_features(struct net_device *dev, u32 features) | 
|  | { | 
|  | u32 changed = dev->features ^ features; | 
|  |  | 
|  | /* Enabling RTH requires some of the logic in vxge_device_register and a | 
|  | * vpath reset.  Due to these restrictions, only allow modification | 
|  | * while the interface is down. | 
|  | */ | 
|  | if ((changed & NETIF_F_RXHASH) && netif_running(dev)) | 
|  | features ^= NETIF_F_RXHASH; | 
|  |  | 
|  | return features; | 
|  | } | 
|  |  | 
|  | static int vxge_set_features(struct net_device *dev, u32 features) | 
|  | { | 
|  | struct vxgedev *vdev = netdev_priv(dev); | 
|  | u32 changed = dev->features ^ features; | 
|  |  | 
|  | if (!(changed & NETIF_F_RXHASH)) | 
|  | return 0; | 
|  |  | 
|  | /* !netif_running() ensured by vxge_fix_features() */ | 
|  |  | 
|  | vdev->devh->config.rth_en = !!(features & NETIF_F_RXHASH); | 
|  | if (vxge_reset_all_vpaths(vdev) != VXGE_HW_OK) { | 
|  | dev->features = features ^ NETIF_F_RXHASH; | 
|  | vdev->devh->config.rth_en = !!(dev->features & NETIF_F_RXHASH); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_open | 
|  | * @dev: pointer to the device structure. | 
|  | * | 
|  | * This function is the open entry point of the driver. It mainly calls a | 
|  | * function to allocate Rx buffers and inserts them into the buffer | 
|  | * descriptors and then enables the Rx part of the NIC. | 
|  | * Return value: '0' on success and an appropriate (-)ve integer as | 
|  | * defined in errno.h file on failure. | 
|  | */ | 
|  | static int vxge_open(struct net_device *dev) | 
|  | { | 
|  | enum vxge_hw_status status; | 
|  | struct vxgedev *vdev; | 
|  | struct __vxge_hw_device *hldev; | 
|  | struct vxge_vpath *vpath; | 
|  | int ret = 0; | 
|  | int i; | 
|  | u64 val64, function_mode; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d", dev->name, __func__, __LINE__); | 
|  |  | 
|  | vdev = netdev_priv(dev); | 
|  | hldev = pci_get_drvdata(vdev->pdev); | 
|  | function_mode = vdev->config.device_hw_info.function_mode; | 
|  |  | 
|  | /* make sure you have link off by default every time Nic is | 
|  | * initialized */ | 
|  | netif_carrier_off(dev); | 
|  |  | 
|  | /* Open VPATHs */ | 
|  | status = vxge_open_vpaths(vdev); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: fatal: Vpath open failed", vdev->ndev->name); | 
|  | ret = -EPERM; | 
|  | goto out0; | 
|  | } | 
|  |  | 
|  | vdev->mtu = dev->mtu; | 
|  |  | 
|  | status = vxge_add_isr(vdev); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: fatal: ISR add failed", dev->name); | 
|  | ret = -EPERM; | 
|  | goto out1; | 
|  | } | 
|  |  | 
|  | if (vdev->config.intr_type != MSI_X) { | 
|  | netif_napi_add(dev, &vdev->napi, vxge_poll_inta, | 
|  | vdev->config.napi_weight); | 
|  | napi_enable(&vdev->napi); | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  | vpath->ring.napi_p = &vdev->napi; | 
|  | } | 
|  | } else { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  | netif_napi_add(dev, &vpath->ring.napi, | 
|  | vxge_poll_msix, vdev->config.napi_weight); | 
|  | napi_enable(&vpath->ring.napi); | 
|  | vpath->ring.napi_p = &vpath->ring.napi; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* configure RTH */ | 
|  | if (vdev->config.rth_steering) { | 
|  | status = vxge_rth_configure(vdev); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: fatal: RTH configuration failed", | 
|  | dev->name); | 
|  | ret = -EPERM; | 
|  | goto out2; | 
|  | } | 
|  | } | 
|  | printk(KERN_INFO "%s: Receive Hashing Offload %s\n", dev->name, | 
|  | hldev->config.rth_en ? "enabled" : "disabled"); | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  |  | 
|  | /* set initial mtu before enabling the device */ | 
|  | status = vxge_hw_vpath_mtu_set(vpath->handle, vdev->mtu); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: fatal: can not set new MTU", dev->name); | 
|  | ret = -EPERM; | 
|  | goto out2; | 
|  | } | 
|  | } | 
|  |  | 
|  | VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_TRACE, VXGE_COMPONENT_LL, vdev); | 
|  | vxge_debug_init(vdev->level_trace, | 
|  | "%s: MTU is %d", vdev->ndev->name, vdev->mtu); | 
|  | VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_ERR, VXGE_COMPONENT_LL, vdev); | 
|  |  | 
|  | /* Restore the DA, VID table and also multicast and promiscuous mode | 
|  | * states | 
|  | */ | 
|  | if (vdev->all_multi_flg) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  | vxge_restore_vpath_mac_addr(vpath); | 
|  | vxge_restore_vpath_vid_table(vpath); | 
|  |  | 
|  | status = vxge_hw_vpath_mcast_enable(vpath->handle); | 
|  | if (status != VXGE_HW_OK) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s:%d Enabling multicast failed", | 
|  | __func__, __LINE__); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Enable vpath to sniff all unicast/multicast traffic that not | 
|  | * addressed to them. We allow promiscuous mode for PF only | 
|  | */ | 
|  |  | 
|  | val64 = 0; | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | 
|  | val64 |= VXGE_HW_RXMAC_AUTHORIZE_ALL_ADDR_VP(i); | 
|  |  | 
|  | vxge_hw_mgmt_reg_write(vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | 
|  | rxmac_authorize_all_addr), | 
|  | val64); | 
|  |  | 
|  | vxge_hw_mgmt_reg_write(vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | 
|  | rxmac_authorize_all_vid), | 
|  | val64); | 
|  |  | 
|  | vxge_set_multicast(dev); | 
|  |  | 
|  | /* Enabling Bcast and mcast for all vpath */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  | status = vxge_hw_vpath_bcast_enable(vpath->handle); | 
|  | if (status != VXGE_HW_OK) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s : Can not enable bcast for vpath " | 
|  | "id %d", dev->name, i); | 
|  | if (vdev->config.addr_learn_en) { | 
|  | status = vxge_hw_vpath_mcast_enable(vpath->handle); | 
|  | if (status != VXGE_HW_OK) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s : Can not enable mcast for vpath " | 
|  | "id %d", dev->name, i); | 
|  | } | 
|  | } | 
|  |  | 
|  | vxge_hw_device_setpause_data(vdev->devh, 0, | 
|  | vdev->config.tx_pause_enable, | 
|  | vdev->config.rx_pause_enable); | 
|  |  | 
|  | if (vdev->vp_reset_timer.function == NULL) | 
|  | vxge_os_timer(vdev->vp_reset_timer, | 
|  | vxge_poll_vp_reset, vdev, (HZ/2)); | 
|  |  | 
|  | /* There is no need to check for RxD leak and RxD lookup on Titan1A */ | 
|  | if (vdev->titan1 && vdev->vp_lockup_timer.function == NULL) | 
|  | vxge_os_timer(vdev->vp_lockup_timer, vxge_poll_vp_lockup, vdev, | 
|  | HZ / 2); | 
|  |  | 
|  | set_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  |  | 
|  | smp_wmb(); | 
|  |  | 
|  | if (vxge_hw_device_link_state_get(vdev->devh) == VXGE_HW_LINK_UP) { | 
|  | netif_carrier_on(vdev->ndev); | 
|  | netdev_notice(vdev->ndev, "Link Up\n"); | 
|  | vdev->stats.link_up++; | 
|  | } | 
|  |  | 
|  | vxge_hw_device_intr_enable(vdev->devh); | 
|  |  | 
|  | smp_wmb(); | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vpath = &vdev->vpaths[i]; | 
|  |  | 
|  | vxge_hw_vpath_enable(vpath->handle); | 
|  | smp_wmb(); | 
|  | vxge_hw_vpath_rx_doorbell_init(vpath->handle); | 
|  | } | 
|  |  | 
|  | netif_tx_start_all_queues(vdev->ndev); | 
|  |  | 
|  | /* configure CI */ | 
|  | vxge_config_ci_for_tti_rti(vdev); | 
|  |  | 
|  | goto out0; | 
|  |  | 
|  | out2: | 
|  | vxge_rem_isr(vdev); | 
|  |  | 
|  | /* Disable napi */ | 
|  | if (vdev->config.intr_type != MSI_X) | 
|  | napi_disable(&vdev->napi); | 
|  | else { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | napi_disable(&vdev->vpaths[i].ring.napi); | 
|  | } | 
|  |  | 
|  | out1: | 
|  | vxge_close_vpaths(vdev, 0); | 
|  | out0: | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d  Exiting...", | 
|  | dev->name, __func__, __LINE__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Loop through the mac address list and delete all the entries */ | 
|  | static void vxge_free_mac_add_list(struct vxge_vpath *vpath) | 
|  | { | 
|  |  | 
|  | struct list_head *entry, *next; | 
|  | if (list_empty(&vpath->mac_addr_list)) | 
|  | return; | 
|  |  | 
|  | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | 
|  | list_del(entry); | 
|  | kfree((struct vxge_mac_addrs *)entry); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void vxge_napi_del_all(struct vxgedev *vdev) | 
|  | { | 
|  | int i; | 
|  | if (vdev->config.intr_type != MSI_X) | 
|  | netif_napi_del(&vdev->napi); | 
|  | else { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | netif_napi_del(&vdev->vpaths[i].ring.napi); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int do_vxge_close(struct net_device *dev, int do_io) | 
|  | { | 
|  | enum vxge_hw_status status; | 
|  | struct vxgedev *vdev; | 
|  | struct __vxge_hw_device *hldev; | 
|  | int i; | 
|  | u64 val64, vpath_vector; | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | dev->name, __func__, __LINE__); | 
|  |  | 
|  | vdev = netdev_priv(dev); | 
|  | hldev = pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | if (unlikely(!is_vxge_card_up(vdev))) | 
|  | return 0; | 
|  |  | 
|  | /* If vxge_handle_crit_err task is executing, | 
|  | * wait till it completes. */ | 
|  | while (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | 
|  | msleep(50); | 
|  |  | 
|  | if (do_io) { | 
|  | /* Put the vpath back in normal mode */ | 
|  | vpath_vector = vxge_mBIT(vdev->vpaths[0].device_id); | 
|  | status = vxge_hw_mgmt_reg_read(vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof( | 
|  | struct vxge_hw_mrpcim_reg, | 
|  | rts_mgr_cbasin_cfg), | 
|  | &val64); | 
|  | if (status == VXGE_HW_OK) { | 
|  | val64 &= ~vpath_vector; | 
|  | status = vxge_hw_mgmt_reg_write(vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof( | 
|  | struct vxge_hw_mrpcim_reg, | 
|  | rts_mgr_cbasin_cfg), | 
|  | val64); | 
|  | } | 
|  |  | 
|  | /* Remove the function 0 from promiscuous mode */ | 
|  | vxge_hw_mgmt_reg_write(vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | 
|  | rxmac_authorize_all_addr), | 
|  | 0); | 
|  |  | 
|  | vxge_hw_mgmt_reg_write(vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | 
|  | rxmac_authorize_all_vid), | 
|  | 0); | 
|  |  | 
|  | smp_wmb(); | 
|  | } | 
|  |  | 
|  | if (vdev->titan1) | 
|  | del_timer_sync(&vdev->vp_lockup_timer); | 
|  |  | 
|  | del_timer_sync(&vdev->vp_reset_timer); | 
|  |  | 
|  | if (do_io) | 
|  | vxge_hw_device_wait_receive_idle(hldev); | 
|  |  | 
|  | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  |  | 
|  | /* Disable napi */ | 
|  | if (vdev->config.intr_type != MSI_X) | 
|  | napi_disable(&vdev->napi); | 
|  | else { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | napi_disable(&vdev->vpaths[i].ring.napi); | 
|  | } | 
|  |  | 
|  | netif_carrier_off(vdev->ndev); | 
|  | netdev_notice(vdev->ndev, "Link Down\n"); | 
|  | netif_tx_stop_all_queues(vdev->ndev); | 
|  |  | 
|  | /* Note that at this point xmit() is stopped by upper layer */ | 
|  | if (do_io) | 
|  | vxge_hw_device_intr_disable(vdev->devh); | 
|  |  | 
|  | vxge_rem_isr(vdev); | 
|  |  | 
|  | vxge_napi_del_all(vdev); | 
|  |  | 
|  | if (do_io) | 
|  | vxge_reset_all_vpaths(vdev); | 
|  |  | 
|  | vxge_close_vpaths(vdev, 0); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d  Exiting...", dev->name, __func__, __LINE__); | 
|  |  | 
|  | clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_close | 
|  | * @dev: device pointer. | 
|  | * | 
|  | * This is the stop entry point of the driver. It needs to undo exactly | 
|  | * whatever was done by the open entry point, thus it's usually referred to | 
|  | * as the close function.Among other things this function mainly stops the | 
|  | * Rx side of the NIC and frees all the Rx buffers in the Rx rings. | 
|  | * Return value: '0' on success and an appropriate (-)ve integer as | 
|  | * defined in errno.h file on failure. | 
|  | */ | 
|  | static int vxge_close(struct net_device *dev) | 
|  | { | 
|  | do_vxge_close(dev, 1); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_change_mtu | 
|  | * @dev: net device pointer. | 
|  | * @new_mtu :the new MTU size for the device. | 
|  | * | 
|  | * A driver entry point to change MTU size for the device. Before changing | 
|  | * the MTU the device must be stopped. | 
|  | */ | 
|  | static int vxge_change_mtu(struct net_device *dev, int new_mtu) | 
|  | { | 
|  | struct vxgedev *vdev = netdev_priv(dev); | 
|  |  | 
|  | vxge_debug_entryexit(vdev->level_trace, | 
|  | "%s:%d", __func__, __LINE__); | 
|  | if ((new_mtu < VXGE_HW_MIN_MTU) || (new_mtu > VXGE_HW_MAX_MTU)) { | 
|  | vxge_debug_init(vdev->level_err, | 
|  | "%s: mtu size is invalid", dev->name); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | /* check if device is down already */ | 
|  | if (unlikely(!is_vxge_card_up(vdev))) { | 
|  | /* just store new value, will use later on open() */ | 
|  | dev->mtu = new_mtu; | 
|  | vxge_debug_init(vdev->level_err, | 
|  | "%s", "device is down on MTU change"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | vxge_debug_init(vdev->level_trace, | 
|  | "trying to apply new MTU %d", new_mtu); | 
|  |  | 
|  | if (vxge_close(dev)) | 
|  | return -EIO; | 
|  |  | 
|  | dev->mtu = new_mtu; | 
|  | vdev->mtu = new_mtu; | 
|  |  | 
|  | if (vxge_open(dev)) | 
|  | return -EIO; | 
|  |  | 
|  | vxge_debug_init(vdev->level_trace, | 
|  | "%s: MTU changed to %d", vdev->ndev->name, new_mtu); | 
|  |  | 
|  | vxge_debug_entryexit(vdev->level_trace, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_get_stats64 | 
|  | * @dev: pointer to the device structure | 
|  | * @stats: pointer to struct rtnl_link_stats64 | 
|  | * | 
|  | */ | 
|  | static struct rtnl_link_stats64 * | 
|  | vxge_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *net_stats) | 
|  | { | 
|  | struct vxgedev *vdev = netdev_priv(dev); | 
|  | int k; | 
|  |  | 
|  | /* net_stats already zeroed by caller */ | 
|  | for (k = 0; k < vdev->no_of_vpath; k++) { | 
|  | net_stats->rx_packets += vdev->vpaths[k].ring.stats.rx_frms; | 
|  | net_stats->rx_bytes += vdev->vpaths[k].ring.stats.rx_bytes; | 
|  | net_stats->rx_errors += vdev->vpaths[k].ring.stats.rx_errors; | 
|  | net_stats->multicast += vdev->vpaths[k].ring.stats.rx_mcast; | 
|  | net_stats->rx_dropped += vdev->vpaths[k].ring.stats.rx_dropped; | 
|  | net_stats->tx_packets += vdev->vpaths[k].fifo.stats.tx_frms; | 
|  | net_stats->tx_bytes += vdev->vpaths[k].fifo.stats.tx_bytes; | 
|  | net_stats->tx_errors += vdev->vpaths[k].fifo.stats.tx_errors; | 
|  | } | 
|  |  | 
|  | return net_stats; | 
|  | } | 
|  |  | 
|  | static enum vxge_hw_status vxge_timestamp_config(struct __vxge_hw_device *devh) | 
|  | { | 
|  | enum vxge_hw_status status; | 
|  | u64 val64; | 
|  |  | 
|  | /* Timestamp is passed to the driver via the FCS, therefore we | 
|  | * must disable the FCS stripping by the adapter.  Since this is | 
|  | * required for the driver to load (due to a hardware bug), | 
|  | * there is no need to do anything special here. | 
|  | */ | 
|  | val64 = VXGE_HW_XMAC_TIMESTAMP_EN | | 
|  | VXGE_HW_XMAC_TIMESTAMP_USE_LINK_ID(0) | | 
|  | VXGE_HW_XMAC_TIMESTAMP_INTERVAL(0); | 
|  |  | 
|  | status = vxge_hw_mgmt_reg_write(devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | offsetof(struct vxge_hw_mrpcim_reg, | 
|  | xmac_timestamp), | 
|  | val64); | 
|  | vxge_hw_device_flush_io(devh); | 
|  | devh->config.hwts_en = VXGE_HW_HWTS_ENABLE; | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int vxge_hwtstamp_ioctl(struct vxgedev *vdev, void __user *data) | 
|  | { | 
|  | struct hwtstamp_config config; | 
|  | int i; | 
|  |  | 
|  | if (copy_from_user(&config, data, sizeof(config))) | 
|  | return -EFAULT; | 
|  |  | 
|  | /* reserved for future extensions */ | 
|  | if (config.flags) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Transmit HW Timestamp not supported */ | 
|  | switch (config.tx_type) { | 
|  | case HWTSTAMP_TX_OFF: | 
|  | break; | 
|  | case HWTSTAMP_TX_ON: | 
|  | default: | 
|  | return -ERANGE; | 
|  | } | 
|  |  | 
|  | switch (config.rx_filter) { | 
|  | case HWTSTAMP_FILTER_NONE: | 
|  | vdev->rx_hwts = 0; | 
|  | config.rx_filter = HWTSTAMP_FILTER_NONE; | 
|  | break; | 
|  |  | 
|  | case HWTSTAMP_FILTER_ALL: | 
|  | case HWTSTAMP_FILTER_SOME: | 
|  | case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: | 
|  | case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: | 
|  | case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: | 
|  | case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: | 
|  | case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: | 
|  | case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: | 
|  | case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: | 
|  | case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: | 
|  | case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: | 
|  | case HWTSTAMP_FILTER_PTP_V2_EVENT: | 
|  | case HWTSTAMP_FILTER_PTP_V2_SYNC: | 
|  | case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: | 
|  | if (vdev->devh->config.hwts_en != VXGE_HW_HWTS_ENABLE) | 
|  | return -EFAULT; | 
|  |  | 
|  | vdev->rx_hwts = 1; | 
|  | config.rx_filter = HWTSTAMP_FILTER_ALL; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -ERANGE; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | vdev->vpaths[i].ring.rx_hwts = vdev->rx_hwts; | 
|  |  | 
|  | if (copy_to_user(data, &config, sizeof(config))) | 
|  | return -EFAULT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_ioctl | 
|  | * @dev: Device pointer. | 
|  | * @ifr: An IOCTL specific structure, that can contain a pointer to | 
|  | *       a proprietary structure used to pass information to the driver. | 
|  | * @cmd: This is used to distinguish between the different commands that | 
|  | *       can be passed to the IOCTL functions. | 
|  | * | 
|  | * Entry point for the Ioctl. | 
|  | */ | 
|  | static int vxge_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | 
|  | { | 
|  | struct vxgedev *vdev = netdev_priv(dev); | 
|  | int ret; | 
|  |  | 
|  | switch (cmd) { | 
|  | case SIOCSHWTSTAMP: | 
|  | ret = vxge_hwtstamp_ioctl(vdev, rq->ifr_data); | 
|  | if (ret) | 
|  | return ret; | 
|  | break; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_tx_watchdog | 
|  | * @dev: pointer to net device structure | 
|  | * | 
|  | * Watchdog for transmit side. | 
|  | * This function is triggered if the Tx Queue is stopped | 
|  | * for a pre-defined amount of time when the Interface is still up. | 
|  | */ | 
|  | static void vxge_tx_watchdog(struct net_device *dev) | 
|  | { | 
|  | struct vxgedev *vdev; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | vdev = netdev_priv(dev); | 
|  |  | 
|  | vdev->cric_err_event = VXGE_HW_EVENT_RESET_START; | 
|  |  | 
|  | schedule_work(&vdev->reset_task); | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_vlan_rx_register | 
|  | * @dev: net device pointer. | 
|  | * @grp: vlan group | 
|  | * | 
|  | * Vlan group registration | 
|  | */ | 
|  | static void | 
|  | vxge_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) | 
|  | { | 
|  | struct vxgedev *vdev; | 
|  | struct vxge_vpath *vpath; | 
|  | int vp; | 
|  | u64 vid; | 
|  | enum vxge_hw_status status; | 
|  | int i; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | vdev = netdev_priv(dev); | 
|  |  | 
|  | vpath = &vdev->vpaths[0]; | 
|  | if ((NULL == grp) && (vpath->is_open)) { | 
|  | /* Get the first vlan */ | 
|  | status = vxge_hw_vpath_vid_get(vpath->handle, &vid); | 
|  |  | 
|  | while (status == VXGE_HW_OK) { | 
|  |  | 
|  | /* Delete this vlan from the vid table */ | 
|  | for (vp = 0; vp < vdev->no_of_vpath; vp++) { | 
|  | vpath = &vdev->vpaths[vp]; | 
|  | if (!vpath->is_open) | 
|  | continue; | 
|  |  | 
|  | vxge_hw_vpath_vid_delete(vpath->handle, vid); | 
|  | } | 
|  |  | 
|  | /* Get the next vlan to be deleted */ | 
|  | vpath = &vdev->vpaths[0]; | 
|  | status = vxge_hw_vpath_vid_get(vpath->handle, &vid); | 
|  | } | 
|  | } | 
|  |  | 
|  | vdev->vlgrp = grp; | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | if (vdev->vpaths[i].is_configured) | 
|  | vdev->vpaths[i].ring.vlgrp = grp; | 
|  | } | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_vlan_rx_add_vid | 
|  | * @dev: net device pointer. | 
|  | * @vid: vid | 
|  | * | 
|  | * Add the vlan id to the devices vlan id table | 
|  | */ | 
|  | static void | 
|  | vxge_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) | 
|  | { | 
|  | struct vxgedev *vdev; | 
|  | struct vxge_vpath *vpath; | 
|  | int vp_id; | 
|  |  | 
|  | vdev = netdev_priv(dev); | 
|  |  | 
|  | /* Add these vlan to the vid table */ | 
|  | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | 
|  | vpath = &vdev->vpaths[vp_id]; | 
|  | if (!vpath->is_open) | 
|  | continue; | 
|  | vxge_hw_vpath_vid_add(vpath->handle, vid); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_vlan_rx_add_vid | 
|  | * @dev: net device pointer. | 
|  | * @vid: vid | 
|  | * | 
|  | * Remove the vlan id from the device's vlan id table | 
|  | */ | 
|  | static void | 
|  | vxge_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) | 
|  | { | 
|  | struct vxgedev *vdev; | 
|  | struct vxge_vpath *vpath; | 
|  | int vp_id; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | vdev = netdev_priv(dev); | 
|  |  | 
|  | vlan_group_set_device(vdev->vlgrp, vid, NULL); | 
|  |  | 
|  | /* Delete this vlan from the vid table */ | 
|  | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | 
|  | vpath = &vdev->vpaths[vp_id]; | 
|  | if (!vpath->is_open) | 
|  | continue; | 
|  | vxge_hw_vpath_vid_delete(vpath->handle, vid); | 
|  | } | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops vxge_netdev_ops = { | 
|  | .ndo_open               = vxge_open, | 
|  | .ndo_stop               = vxge_close, | 
|  | .ndo_get_stats64        = vxge_get_stats64, | 
|  | .ndo_start_xmit         = vxge_xmit, | 
|  | .ndo_validate_addr      = eth_validate_addr, | 
|  | .ndo_set_multicast_list = vxge_set_multicast, | 
|  | .ndo_do_ioctl           = vxge_ioctl, | 
|  | .ndo_set_mac_address    = vxge_set_mac_addr, | 
|  | .ndo_change_mtu         = vxge_change_mtu, | 
|  | .ndo_fix_features	= vxge_fix_features, | 
|  | .ndo_set_features	= vxge_set_features, | 
|  | .ndo_vlan_rx_register   = vxge_vlan_rx_register, | 
|  | .ndo_vlan_rx_kill_vid   = vxge_vlan_rx_kill_vid, | 
|  | .ndo_vlan_rx_add_vid	= vxge_vlan_rx_add_vid, | 
|  | .ndo_tx_timeout         = vxge_tx_watchdog, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller    = vxge_netpoll, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static int __devinit vxge_device_register(struct __vxge_hw_device *hldev, | 
|  | struct vxge_config *config, | 
|  | int high_dma, int no_of_vpath, | 
|  | struct vxgedev **vdev_out) | 
|  | { | 
|  | struct net_device *ndev; | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxgedev *vdev; | 
|  | int ret = 0, no_of_queue = 1; | 
|  | u64 stat; | 
|  |  | 
|  | *vdev_out = NULL; | 
|  | if (config->tx_steering_type) | 
|  | no_of_queue = no_of_vpath; | 
|  |  | 
|  | ndev = alloc_etherdev_mq(sizeof(struct vxgedev), | 
|  | no_of_queue); | 
|  | if (ndev == NULL) { | 
|  | vxge_debug_init( | 
|  | vxge_hw_device_trace_level_get(hldev), | 
|  | "%s : device allocation failed", __func__); | 
|  | ret = -ENODEV; | 
|  | goto _out0; | 
|  | } | 
|  |  | 
|  | vxge_debug_entryexit( | 
|  | vxge_hw_device_trace_level_get(hldev), | 
|  | "%s: %s:%d  Entering...", | 
|  | ndev->name, __func__, __LINE__); | 
|  |  | 
|  | vdev = netdev_priv(ndev); | 
|  | memset(vdev, 0, sizeof(struct vxgedev)); | 
|  |  | 
|  | vdev->ndev = ndev; | 
|  | vdev->devh = hldev; | 
|  | vdev->pdev = hldev->pdev; | 
|  | memcpy(&vdev->config, config, sizeof(struct vxge_config)); | 
|  | vdev->rx_hwts = 0; | 
|  | vdev->titan1 = (vdev->pdev->revision == VXGE_HW_TITAN1_PCI_REVISION); | 
|  |  | 
|  | SET_NETDEV_DEV(ndev, &vdev->pdev->dev); | 
|  |  | 
|  | ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_SG | | 
|  | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | | 
|  | NETIF_F_TSO | NETIF_F_TSO6 | | 
|  | NETIF_F_HW_VLAN_TX; | 
|  | if (vdev->config.rth_steering != NO_STEERING) | 
|  | ndev->hw_features |= NETIF_F_RXHASH; | 
|  |  | 
|  | ndev->features |= ndev->hw_features | | 
|  | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; | 
|  |  | 
|  | /*  Driver entry points */ | 
|  | ndev->irq = vdev->pdev->irq; | 
|  | ndev->base_addr = (unsigned long) hldev->bar0; | 
|  |  | 
|  | ndev->netdev_ops = &vxge_netdev_ops; | 
|  |  | 
|  | ndev->watchdog_timeo = VXGE_LL_WATCH_DOG_TIMEOUT; | 
|  | INIT_WORK(&vdev->reset_task, vxge_reset); | 
|  |  | 
|  | vxge_initialize_ethtool_ops(ndev); | 
|  |  | 
|  | /* Allocate memory for vpath */ | 
|  | vdev->vpaths = kzalloc((sizeof(struct vxge_vpath)) * | 
|  | no_of_vpath, GFP_KERNEL); | 
|  | if (!vdev->vpaths) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: vpath memory allocation failed", | 
|  | vdev->ndev->name); | 
|  | ret = -ENOMEM; | 
|  | goto _out1; | 
|  | } | 
|  |  | 
|  | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | 
|  | "%s : checksuming enabled", __func__); | 
|  |  | 
|  | if (high_dma) { | 
|  | ndev->features |= NETIF_F_HIGHDMA; | 
|  | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | 
|  | "%s : using High DMA", __func__); | 
|  | } | 
|  |  | 
|  | ret = register_netdev(ndev); | 
|  | if (ret) { | 
|  | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | 
|  | "%s: %s : device registration failed!", | 
|  | ndev->name, __func__); | 
|  | goto _out2; | 
|  | } | 
|  |  | 
|  | /*  Set the factory defined MAC address initially */ | 
|  | ndev->addr_len = ETH_ALEN; | 
|  |  | 
|  | /* Make Link state as off at this point, when the Link change | 
|  | * interrupt comes the state will be automatically changed to | 
|  | * the right state. | 
|  | */ | 
|  | netif_carrier_off(ndev); | 
|  |  | 
|  | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | 
|  | "%s: Ethernet device registered", | 
|  | ndev->name); | 
|  |  | 
|  | hldev->ndev = ndev; | 
|  | *vdev_out = vdev; | 
|  |  | 
|  | /* Resetting the Device stats */ | 
|  | status = vxge_hw_mrpcim_stats_access( | 
|  | hldev, | 
|  | VXGE_HW_STATS_OP_CLEAR_ALL_STATS, | 
|  | 0, | 
|  | 0, | 
|  | &stat); | 
|  |  | 
|  | if (status == VXGE_HW_ERR_PRIVILAGED_OPEARATION) | 
|  | vxge_debug_init( | 
|  | vxge_hw_device_trace_level_get(hldev), | 
|  | "%s: device stats clear returns" | 
|  | "VXGE_HW_ERR_PRIVILAGED_OPEARATION", ndev->name); | 
|  |  | 
|  | vxge_debug_entryexit(vxge_hw_device_trace_level_get(hldev), | 
|  | "%s: %s:%d  Exiting...", | 
|  | ndev->name, __func__, __LINE__); | 
|  |  | 
|  | return ret; | 
|  | _out2: | 
|  | kfree(vdev->vpaths); | 
|  | _out1: | 
|  | free_netdev(ndev); | 
|  | _out0: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_device_unregister | 
|  | * | 
|  | * This function will unregister and free network device | 
|  | */ | 
|  | static void vxge_device_unregister(struct __vxge_hw_device *hldev) | 
|  | { | 
|  | struct vxgedev *vdev; | 
|  | struct net_device *dev; | 
|  | char buf[IFNAMSIZ]; | 
|  |  | 
|  | dev = hldev->ndev; | 
|  | vdev = netdev_priv(dev); | 
|  |  | 
|  | vxge_debug_entryexit(vdev->level_trace,	"%s: %s:%d", vdev->ndev->name, | 
|  | __func__, __LINE__); | 
|  |  | 
|  | strncpy(buf, dev->name, IFNAMSIZ); | 
|  |  | 
|  | flush_work_sync(&vdev->reset_task); | 
|  |  | 
|  | /* in 2.6 will call stop() if device is up */ | 
|  | unregister_netdev(dev); | 
|  |  | 
|  | kfree(vdev->vpaths); | 
|  |  | 
|  | /* we are safe to free it now */ | 
|  | free_netdev(dev); | 
|  |  | 
|  | vxge_debug_init(vdev->level_trace, "%s: ethernet device unregistered", | 
|  | buf); | 
|  | vxge_debug_entryexit(vdev->level_trace,	"%s: %s:%d  Exiting...", buf, | 
|  | __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_callback_crit_err | 
|  | * | 
|  | * This function is called by the alarm handler in interrupt context. | 
|  | * Driver must analyze it based on the event type. | 
|  | */ | 
|  | static void | 
|  | vxge_callback_crit_err(struct __vxge_hw_device *hldev, | 
|  | enum vxge_hw_event type, u64 vp_id) | 
|  | { | 
|  | struct net_device *dev = hldev->ndev; | 
|  | struct vxgedev *vdev = netdev_priv(dev); | 
|  | struct vxge_vpath *vpath = NULL; | 
|  | int vpath_idx; | 
|  |  | 
|  | vxge_debug_entryexit(vdev->level_trace, | 
|  | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | /* Note: This event type should be used for device wide | 
|  | * indications only - Serious errors, Slot freeze and critical errors | 
|  | */ | 
|  | vdev->cric_err_event = type; | 
|  |  | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
|  | vpath = &vdev->vpaths[vpath_idx]; | 
|  | if (vpath->device_id == vp_id) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) { | 
|  | if (type == VXGE_HW_EVENT_SLOT_FREEZE) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Slot is frozen", vdev->ndev->name); | 
|  | } else if (type == VXGE_HW_EVENT_SERR) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Encountered Serious Error", | 
|  | vdev->ndev->name); | 
|  | } else if (type == VXGE_HW_EVENT_CRITICAL_ERR) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Encountered Critical Error", | 
|  | vdev->ndev->name); | 
|  | } | 
|  |  | 
|  | if ((type == VXGE_HW_EVENT_SERR) || | 
|  | (type == VXGE_HW_EVENT_SLOT_FREEZE)) { | 
|  | if (unlikely(vdev->exec_mode)) | 
|  | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  | } else if (type == VXGE_HW_EVENT_CRITICAL_ERR) { | 
|  | vxge_hw_device_mask_all(hldev); | 
|  | if (unlikely(vdev->exec_mode)) | 
|  | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  | } else if ((type == VXGE_HW_EVENT_FIFO_ERR) || | 
|  | (type == VXGE_HW_EVENT_VPATH_ERR)) { | 
|  |  | 
|  | if (unlikely(vdev->exec_mode)) | 
|  | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  | else { | 
|  | /* check if this vpath is already set for reset */ | 
|  | if (!test_and_set_bit(vpath_idx, &vdev->vp_reset)) { | 
|  |  | 
|  | /* disable interrupts for this vpath */ | 
|  | vxge_vpath_intr_disable(vdev, vpath_idx); | 
|  |  | 
|  | /* stop the queue for this vpath */ | 
|  | netif_tx_stop_queue(vpath->fifo.txq); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | vxge_debug_entryexit(vdev->level_trace, | 
|  | "%s: %s:%d  Exiting...", | 
|  | vdev->ndev->name, __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | static void verify_bandwidth(void) | 
|  | { | 
|  | int i, band_width, total = 0, equal_priority = 0; | 
|  |  | 
|  | /* 1. If user enters 0 for some fifo, give equal priority to all */ | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
|  | if (bw_percentage[i] == 0) { | 
|  | equal_priority = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!equal_priority) { | 
|  | /* 2. If sum exceeds 100, give equal priority to all */ | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
|  | if (bw_percentage[i] == 0xFF) | 
|  | break; | 
|  |  | 
|  | total += bw_percentage[i]; | 
|  | if (total > VXGE_HW_VPATH_BANDWIDTH_MAX) { | 
|  | equal_priority = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!equal_priority) { | 
|  | /* Is all the bandwidth consumed? */ | 
|  | if (total < VXGE_HW_VPATH_BANDWIDTH_MAX) { | 
|  | if (i < VXGE_HW_MAX_VIRTUAL_PATHS) { | 
|  | /* Split rest of bw equally among next VPs*/ | 
|  | band_width = | 
|  | (VXGE_HW_VPATH_BANDWIDTH_MAX  - total) / | 
|  | (VXGE_HW_MAX_VIRTUAL_PATHS - i); | 
|  | if (band_width < 2) /* min of 2% */ | 
|  | equal_priority = 1; | 
|  | else { | 
|  | for (; i < VXGE_HW_MAX_VIRTUAL_PATHS; | 
|  | i++) | 
|  | bw_percentage[i] = | 
|  | band_width; | 
|  | } | 
|  | } | 
|  | } else if (i < VXGE_HW_MAX_VIRTUAL_PATHS) | 
|  | equal_priority = 1; | 
|  | } | 
|  |  | 
|  | if (equal_priority) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Assigning equal bandwidth to all the vpaths", | 
|  | VXGE_DRIVER_NAME); | 
|  | bw_percentage[0] = VXGE_HW_VPATH_BANDWIDTH_MAX / | 
|  | VXGE_HW_MAX_VIRTUAL_PATHS; | 
|  | for (i = 1; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | 
|  | bw_percentage[i] = bw_percentage[0]; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Vpath configuration | 
|  | */ | 
|  | static int __devinit vxge_config_vpaths( | 
|  | struct vxge_hw_device_config *device_config, | 
|  | u64 vpath_mask, struct vxge_config *config_param) | 
|  | { | 
|  | int i, no_of_vpaths = 0, default_no_vpath = 0, temp; | 
|  | u32 txdl_size, txdl_per_memblock; | 
|  |  | 
|  | temp = driver_config->vpath_per_dev; | 
|  | if ((driver_config->vpath_per_dev == VXGE_USE_DEFAULT) && | 
|  | (max_config_dev == VXGE_MAX_CONFIG_DEV)) { | 
|  | /* No more CPU. Return vpath number as zero.*/ | 
|  | if (driver_config->g_no_cpus == -1) | 
|  | return 0; | 
|  |  | 
|  | if (!driver_config->g_no_cpus) | 
|  | driver_config->g_no_cpus = num_online_cpus(); | 
|  |  | 
|  | driver_config->vpath_per_dev = driver_config->g_no_cpus >> 1; | 
|  | if (!driver_config->vpath_per_dev) | 
|  | driver_config->vpath_per_dev = 1; | 
|  |  | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | 
|  | if (!vxge_bVALn(vpath_mask, i, 1)) | 
|  | continue; | 
|  | else | 
|  | default_no_vpath++; | 
|  | if (default_no_vpath < driver_config->vpath_per_dev) | 
|  | driver_config->vpath_per_dev = default_no_vpath; | 
|  |  | 
|  | driver_config->g_no_cpus = driver_config->g_no_cpus - | 
|  | (driver_config->vpath_per_dev * 2); | 
|  | if (driver_config->g_no_cpus <= 0) | 
|  | driver_config->g_no_cpus = -1; | 
|  | } | 
|  |  | 
|  | if (driver_config->vpath_per_dev == 1) { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: Disable tx and rx steering, " | 
|  | "as single vpath is configured", VXGE_DRIVER_NAME); | 
|  | config_param->rth_steering = NO_STEERING; | 
|  | config_param->tx_steering_type = NO_STEERING; | 
|  | device_config->rth_en = 0; | 
|  | } | 
|  |  | 
|  | /* configure bandwidth */ | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | 
|  | device_config->vp_config[i].min_bandwidth = bw_percentage[i]; | 
|  |  | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
|  | device_config->vp_config[i].vp_id = i; | 
|  | device_config->vp_config[i].mtu = VXGE_HW_DEFAULT_MTU; | 
|  | if (no_of_vpaths < driver_config->vpath_per_dev) { | 
|  | if (!vxge_bVALn(vpath_mask, i, 1)) { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: vpath: %d is not available", | 
|  | VXGE_DRIVER_NAME, i); | 
|  | continue; | 
|  | } else { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: vpath: %d available", | 
|  | VXGE_DRIVER_NAME, i); | 
|  | no_of_vpaths++; | 
|  | } | 
|  | } else { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: vpath: %d is not configured, " | 
|  | "max_config_vpath exceeded", | 
|  | VXGE_DRIVER_NAME, i); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Configure Tx fifo's */ | 
|  | device_config->vp_config[i].fifo.enable = | 
|  | VXGE_HW_FIFO_ENABLE; | 
|  | device_config->vp_config[i].fifo.max_frags = | 
|  | MAX_SKB_FRAGS + 1; | 
|  | device_config->vp_config[i].fifo.memblock_size = | 
|  | VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE; | 
|  |  | 
|  | txdl_size = device_config->vp_config[i].fifo.max_frags * | 
|  | sizeof(struct vxge_hw_fifo_txd); | 
|  | txdl_per_memblock = VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE / txdl_size; | 
|  |  | 
|  | device_config->vp_config[i].fifo.fifo_blocks = | 
|  | ((VXGE_DEF_FIFO_LENGTH - 1) / txdl_per_memblock) + 1; | 
|  |  | 
|  | device_config->vp_config[i].fifo.intr = | 
|  | VXGE_HW_FIFO_QUEUE_INTR_DISABLE; | 
|  |  | 
|  | /* Configure tti properties */ | 
|  | device_config->vp_config[i].tti.intr_enable = | 
|  | VXGE_HW_TIM_INTR_ENABLE; | 
|  |  | 
|  | device_config->vp_config[i].tti.btimer_val = | 
|  | (VXGE_TTI_BTIMER_VAL * 1000) / 272; | 
|  |  | 
|  | device_config->vp_config[i].tti.timer_ac_en = | 
|  | VXGE_HW_TIM_TIMER_AC_ENABLE; | 
|  |  | 
|  | /* For msi-x with napi (each vector has a handler of its own) - | 
|  | * Set CI to OFF for all vpaths | 
|  | */ | 
|  | device_config->vp_config[i].tti.timer_ci_en = | 
|  | VXGE_HW_TIM_TIMER_CI_DISABLE; | 
|  |  | 
|  | device_config->vp_config[i].tti.timer_ri_en = | 
|  | VXGE_HW_TIM_TIMER_RI_DISABLE; | 
|  |  | 
|  | device_config->vp_config[i].tti.util_sel = | 
|  | VXGE_HW_TIM_UTIL_SEL_LEGACY_TX_NET_UTIL; | 
|  |  | 
|  | device_config->vp_config[i].tti.ltimer_val = | 
|  | (VXGE_TTI_LTIMER_VAL * 1000) / 272; | 
|  |  | 
|  | device_config->vp_config[i].tti.rtimer_val = | 
|  | (VXGE_TTI_RTIMER_VAL * 1000) / 272; | 
|  |  | 
|  | device_config->vp_config[i].tti.urange_a = TTI_TX_URANGE_A; | 
|  | device_config->vp_config[i].tti.urange_b = TTI_TX_URANGE_B; | 
|  | device_config->vp_config[i].tti.urange_c = TTI_TX_URANGE_C; | 
|  | device_config->vp_config[i].tti.uec_a = TTI_TX_UFC_A; | 
|  | device_config->vp_config[i].tti.uec_b = TTI_TX_UFC_B; | 
|  | device_config->vp_config[i].tti.uec_c = TTI_TX_UFC_C; | 
|  | device_config->vp_config[i].tti.uec_d = TTI_TX_UFC_D; | 
|  |  | 
|  | /* Configure Rx rings */ | 
|  | device_config->vp_config[i].ring.enable  = | 
|  | VXGE_HW_RING_ENABLE; | 
|  |  | 
|  | device_config->vp_config[i].ring.ring_blocks  = | 
|  | VXGE_HW_DEF_RING_BLOCKS; | 
|  |  | 
|  | device_config->vp_config[i].ring.buffer_mode = | 
|  | VXGE_HW_RING_RXD_BUFFER_MODE_1; | 
|  |  | 
|  | device_config->vp_config[i].ring.rxds_limit  = | 
|  | VXGE_HW_DEF_RING_RXDS_LIMIT; | 
|  |  | 
|  | device_config->vp_config[i].ring.scatter_mode = | 
|  | VXGE_HW_RING_SCATTER_MODE_A; | 
|  |  | 
|  | /* Configure rti properties */ | 
|  | device_config->vp_config[i].rti.intr_enable = | 
|  | VXGE_HW_TIM_INTR_ENABLE; | 
|  |  | 
|  | device_config->vp_config[i].rti.btimer_val = | 
|  | (VXGE_RTI_BTIMER_VAL * 1000)/272; | 
|  |  | 
|  | device_config->vp_config[i].rti.timer_ac_en = | 
|  | VXGE_HW_TIM_TIMER_AC_ENABLE; | 
|  |  | 
|  | device_config->vp_config[i].rti.timer_ci_en = | 
|  | VXGE_HW_TIM_TIMER_CI_DISABLE; | 
|  |  | 
|  | device_config->vp_config[i].rti.timer_ri_en = | 
|  | VXGE_HW_TIM_TIMER_RI_DISABLE; | 
|  |  | 
|  | device_config->vp_config[i].rti.util_sel = | 
|  | VXGE_HW_TIM_UTIL_SEL_LEGACY_RX_NET_UTIL; | 
|  |  | 
|  | device_config->vp_config[i].rti.urange_a = | 
|  | RTI_RX_URANGE_A; | 
|  | device_config->vp_config[i].rti.urange_b = | 
|  | RTI_RX_URANGE_B; | 
|  | device_config->vp_config[i].rti.urange_c = | 
|  | RTI_RX_URANGE_C; | 
|  | device_config->vp_config[i].rti.uec_a = RTI_RX_UFC_A; | 
|  | device_config->vp_config[i].rti.uec_b = RTI_RX_UFC_B; | 
|  | device_config->vp_config[i].rti.uec_c = RTI_RX_UFC_C; | 
|  | device_config->vp_config[i].rti.uec_d = RTI_RX_UFC_D; | 
|  |  | 
|  | device_config->vp_config[i].rti.rtimer_val = | 
|  | (VXGE_RTI_RTIMER_VAL * 1000) / 272; | 
|  |  | 
|  | device_config->vp_config[i].rti.ltimer_val = | 
|  | (VXGE_RTI_LTIMER_VAL * 1000) / 272; | 
|  |  | 
|  | device_config->vp_config[i].rpa_strip_vlan_tag = | 
|  | vlan_tag_strip; | 
|  | } | 
|  |  | 
|  | driver_config->vpath_per_dev = temp; | 
|  | return no_of_vpaths; | 
|  | } | 
|  |  | 
|  | /* initialize device configuratrions */ | 
|  | static void __devinit vxge_device_config_init( | 
|  | struct vxge_hw_device_config *device_config, | 
|  | int *intr_type) | 
|  | { | 
|  | /* Used for CQRQ/SRQ. */ | 
|  | device_config->dma_blockpool_initial = | 
|  | VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE; | 
|  |  | 
|  | device_config->dma_blockpool_max = | 
|  | VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE; | 
|  |  | 
|  | if (max_mac_vpath > VXGE_MAX_MAC_ADDR_COUNT) | 
|  | max_mac_vpath = VXGE_MAX_MAC_ADDR_COUNT; | 
|  |  | 
|  | #ifndef CONFIG_PCI_MSI | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: This Kernel does not support " | 
|  | "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME); | 
|  | *intr_type = INTA; | 
|  | #endif | 
|  |  | 
|  | /* Configure whether MSI-X or IRQL. */ | 
|  | switch (*intr_type) { | 
|  | case INTA: | 
|  | device_config->intr_mode = VXGE_HW_INTR_MODE_IRQLINE; | 
|  | break; | 
|  |  | 
|  | case MSI_X: | 
|  | device_config->intr_mode = VXGE_HW_INTR_MODE_MSIX_ONE_SHOT; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Timer period between device poll */ | 
|  | device_config->device_poll_millis = VXGE_TIMER_DELAY; | 
|  |  | 
|  | /* Configure mac based steering. */ | 
|  | device_config->rts_mac_en = addr_learn_en; | 
|  |  | 
|  | /* Configure Vpaths */ | 
|  | device_config->rth_it_type = VXGE_HW_RTH_IT_TYPE_MULTI_IT; | 
|  |  | 
|  | vxge_debug_ll_config(VXGE_TRACE, "%s : Device Config Params ", | 
|  | __func__); | 
|  | vxge_debug_ll_config(VXGE_TRACE, "intr_mode : %d", | 
|  | device_config->intr_mode); | 
|  | vxge_debug_ll_config(VXGE_TRACE, "device_poll_millis : %d", | 
|  | device_config->device_poll_millis); | 
|  | vxge_debug_ll_config(VXGE_TRACE, "rth_en : %d", | 
|  | device_config->rth_en); | 
|  | vxge_debug_ll_config(VXGE_TRACE, "rth_it_type : %d", | 
|  | device_config->rth_it_type); | 
|  | } | 
|  |  | 
|  | static void __devinit vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: %d Vpath(s) opened", | 
|  | vdev->ndev->name, vdev->no_of_vpath); | 
|  |  | 
|  | switch (vdev->config.intr_type) { | 
|  | case INTA: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Interrupt type INTA", vdev->ndev->name); | 
|  | break; | 
|  |  | 
|  | case MSI_X: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Interrupt type MSI-X", vdev->ndev->name); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (vdev->config.rth_steering) { | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: RTH steering enabled for TCP_IPV4", | 
|  | vdev->ndev->name); | 
|  | } else { | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: RTH steering disabled", vdev->ndev->name); | 
|  | } | 
|  |  | 
|  | switch (vdev->config.tx_steering_type) { | 
|  | case NO_STEERING: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Tx steering disabled", vdev->ndev->name); | 
|  | break; | 
|  | case TX_PRIORITY_STEERING: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Unsupported tx steering option", | 
|  | vdev->ndev->name); | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Tx steering disabled", vdev->ndev->name); | 
|  | vdev->config.tx_steering_type = 0; | 
|  | break; | 
|  | case TX_VLAN_STEERING: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Unsupported tx steering option", | 
|  | vdev->ndev->name); | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Tx steering disabled", vdev->ndev->name); | 
|  | vdev->config.tx_steering_type = 0; | 
|  | break; | 
|  | case TX_MULTIQ_STEERING: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Tx multiqueue steering enabled", | 
|  | vdev->ndev->name); | 
|  | break; | 
|  | case TX_PORT_STEERING: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Tx port steering enabled", | 
|  | vdev->ndev->name); | 
|  | break; | 
|  | default: | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Unsupported tx steering type", | 
|  | vdev->ndev->name); | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Tx steering disabled", vdev->ndev->name); | 
|  | vdev->config.tx_steering_type = 0; | 
|  | } | 
|  |  | 
|  | if (vdev->config.addr_learn_en) | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: MAC Address learning enabled", vdev->ndev->name); | 
|  |  | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
|  | if (!vxge_bVALn(vpath_mask, i, 1)) | 
|  | continue; | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: MTU size - %d", vdev->ndev->name, | 
|  | ((struct __vxge_hw_device  *)(vdev->devh))-> | 
|  | config.vp_config[i].mtu); | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: VLAN tag stripping %s", vdev->ndev->name, | 
|  | ((struct __vxge_hw_device  *)(vdev->devh))-> | 
|  | config.vp_config[i].rpa_strip_vlan_tag | 
|  | ? "Enabled" : "Disabled"); | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: Max frags : %d", vdev->ndev->name, | 
|  | ((struct __vxge_hw_device  *)(vdev->devh))-> | 
|  | config.vp_config[i].fifo.max_frags); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | /** | 
|  | * vxge_pm_suspend - vxge power management suspend entry point | 
|  | * | 
|  | */ | 
|  | static int vxge_pm_suspend(struct pci_dev *pdev, pm_message_t state) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  | /** | 
|  | * vxge_pm_resume - vxge power management resume entry point | 
|  | * | 
|  | */ | 
|  | static int vxge_pm_resume(struct pci_dev *pdev) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * vxge_io_error_detected - called when PCI error is detected | 
|  | * @pdev: Pointer to PCI device | 
|  | * @state: The current pci connection state | 
|  | * | 
|  | * This function is called after a PCI bus error affecting | 
|  | * this device has been detected. | 
|  | */ | 
|  | static pci_ers_result_t vxge_io_error_detected(struct pci_dev *pdev, | 
|  | pci_channel_state_t state) | 
|  | { | 
|  | struct __vxge_hw_device *hldev = pci_get_drvdata(pdev); | 
|  | struct net_device *netdev = hldev->ndev; | 
|  |  | 
|  | netif_device_detach(netdev); | 
|  |  | 
|  | if (state == pci_channel_io_perm_failure) | 
|  | return PCI_ERS_RESULT_DISCONNECT; | 
|  |  | 
|  | if (netif_running(netdev)) { | 
|  | /* Bring down the card, while avoiding PCI I/O */ | 
|  | do_vxge_close(netdev, 0); | 
|  | } | 
|  |  | 
|  | pci_disable_device(pdev); | 
|  |  | 
|  | return PCI_ERS_RESULT_NEED_RESET; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_io_slot_reset - called after the pci bus has been reset. | 
|  | * @pdev: Pointer to PCI device | 
|  | * | 
|  | * Restart the card from scratch, as if from a cold-boot. | 
|  | * At this point, the card has exprienced a hard reset, | 
|  | * followed by fixups by BIOS, and has its config space | 
|  | * set up identically to what it was at cold boot. | 
|  | */ | 
|  | static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev) | 
|  | { | 
|  | struct __vxge_hw_device *hldev = pci_get_drvdata(pdev); | 
|  | struct net_device *netdev = hldev->ndev; | 
|  |  | 
|  | struct vxgedev *vdev = netdev_priv(netdev); | 
|  |  | 
|  | if (pci_enable_device(pdev)) { | 
|  | netdev_err(netdev, "Cannot re-enable device after reset\n"); | 
|  | return PCI_ERS_RESULT_DISCONNECT; | 
|  | } | 
|  |  | 
|  | pci_set_master(pdev); | 
|  | do_vxge_reset(vdev, VXGE_LL_FULL_RESET); | 
|  |  | 
|  | return PCI_ERS_RESULT_RECOVERED; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_io_resume - called when traffic can start flowing again. | 
|  | * @pdev: Pointer to PCI device | 
|  | * | 
|  | * This callback is called when the error recovery driver tells | 
|  | * us that its OK to resume normal operation. | 
|  | */ | 
|  | static void vxge_io_resume(struct pci_dev *pdev) | 
|  | { | 
|  | struct __vxge_hw_device *hldev = pci_get_drvdata(pdev); | 
|  | struct net_device *netdev = hldev->ndev; | 
|  |  | 
|  | if (netif_running(netdev)) { | 
|  | if (vxge_open(netdev)) { | 
|  | netdev_err(netdev, | 
|  | "Can't bring device back up after reset\n"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | netif_device_attach(netdev); | 
|  | } | 
|  |  | 
|  | static inline u32 vxge_get_num_vfs(u64 function_mode) | 
|  | { | 
|  | u32 num_functions = 0; | 
|  |  | 
|  | switch (function_mode) { | 
|  | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION: | 
|  | case VXGE_HW_FUNCTION_MODE_SRIOV_8: | 
|  | num_functions = 8; | 
|  | break; | 
|  | case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION: | 
|  | num_functions = 1; | 
|  | break; | 
|  | case VXGE_HW_FUNCTION_MODE_SRIOV: | 
|  | case VXGE_HW_FUNCTION_MODE_MRIOV: | 
|  | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_17: | 
|  | num_functions = 17; | 
|  | break; | 
|  | case VXGE_HW_FUNCTION_MODE_SRIOV_4: | 
|  | num_functions = 4; | 
|  | break; | 
|  | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_2: | 
|  | num_functions = 2; | 
|  | break; | 
|  | case VXGE_HW_FUNCTION_MODE_MRIOV_8: | 
|  | num_functions = 8; /* TODO */ | 
|  | break; | 
|  | } | 
|  | return num_functions; | 
|  | } | 
|  |  | 
|  | int vxge_fw_upgrade(struct vxgedev *vdev, char *fw_name, int override) | 
|  | { | 
|  | struct __vxge_hw_device *hldev = vdev->devh; | 
|  | u32 maj, min, bld, cmaj, cmin, cbld; | 
|  | enum vxge_hw_status status; | 
|  | const struct firmware *fw; | 
|  | int ret; | 
|  |  | 
|  | ret = request_firmware(&fw, fw_name, &vdev->pdev->dev); | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, "%s: Firmware file '%s' not found", | 
|  | VXGE_DRIVER_NAME, fw_name); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Load the new firmware onto the adapter */ | 
|  | status = vxge_update_fw_image(hldev, fw->data, fw->size); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: FW image download to adapter failed '%s'.", | 
|  | VXGE_DRIVER_NAME, fw_name); | 
|  | ret = -EIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Read the version of the new firmware */ | 
|  | status = vxge_hw_upgrade_read_version(hldev, &maj, &min, &bld); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Upgrade read version failed '%s'.", | 
|  | VXGE_DRIVER_NAME, fw_name); | 
|  | ret = -EIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmaj = vdev->config.device_hw_info.fw_version.major; | 
|  | cmin = vdev->config.device_hw_info.fw_version.minor; | 
|  | cbld = vdev->config.device_hw_info.fw_version.build; | 
|  | /* It's possible the version in /lib/firmware is not the latest version. | 
|  | * If so, we could get into a loop of trying to upgrade to the latest | 
|  | * and flashing the older version. | 
|  | */ | 
|  | if (VXGE_FW_VER(maj, min, bld) == VXGE_FW_VER(cmaj, cmin, cbld) && | 
|  | !override) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | printk(KERN_NOTICE "Upgrade to firmware version %d.%d.%d commencing\n", | 
|  | maj, min, bld); | 
|  |  | 
|  | /* Flash the adapter with the new firmware */ | 
|  | status = vxge_hw_flash_fw(hldev); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, "%s: Upgrade commit failed '%s'.", | 
|  | VXGE_DRIVER_NAME, fw_name); | 
|  | ret = -EIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | printk(KERN_NOTICE "Upgrade of firmware successful!  Adapter must be " | 
|  | "hard reset before using, thus requiring a system reboot or a " | 
|  | "hotplug event.\n"); | 
|  |  | 
|  | out: | 
|  | release_firmware(fw); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int vxge_probe_fw_update(struct vxgedev *vdev) | 
|  | { | 
|  | u32 maj, min, bld; | 
|  | int ret, gpxe = 0; | 
|  | char *fw_name; | 
|  |  | 
|  | maj = vdev->config.device_hw_info.fw_version.major; | 
|  | min = vdev->config.device_hw_info.fw_version.minor; | 
|  | bld = vdev->config.device_hw_info.fw_version.build; | 
|  |  | 
|  | if (VXGE_FW_VER(maj, min, bld) == VXGE_CERT_FW_VER) | 
|  | return 0; | 
|  |  | 
|  | /* Ignore the build number when determining if the current firmware is | 
|  | * "too new" to load the driver | 
|  | */ | 
|  | if (VXGE_FW_VER(maj, min, 0) > VXGE_CERT_FW_VER) { | 
|  | vxge_debug_init(VXGE_ERR, "%s: Firmware newer than last known " | 
|  | "version, unable to load driver\n", | 
|  | VXGE_DRIVER_NAME); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Firmware 1.4.4 and older cannot be upgraded, and is too ancient to | 
|  | * work with this driver. | 
|  | */ | 
|  | if (VXGE_FW_VER(maj, min, bld) <= VXGE_FW_DEAD_VER) { | 
|  | vxge_debug_init(VXGE_ERR, "%s: Firmware %d.%d.%d cannot be " | 
|  | "upgraded\n", VXGE_DRIVER_NAME, maj, min, bld); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* If file not specified, determine gPXE or not */ | 
|  | if (VXGE_FW_VER(maj, min, bld) >= VXGE_EPROM_FW_VER) { | 
|  | int i; | 
|  | for (i = 0; i < VXGE_HW_MAX_ROM_IMAGES; i++) | 
|  | if (vdev->devh->eprom_versions[i]) { | 
|  | gpxe = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (gpxe) | 
|  | fw_name = "vxge/X3fw-pxe.ncf"; | 
|  | else | 
|  | fw_name = "vxge/X3fw.ncf"; | 
|  |  | 
|  | ret = vxge_fw_upgrade(vdev, fw_name, 0); | 
|  | /* -EINVAL and -ENOENT are not fatal errors for flashing firmware on | 
|  | * probe, so ignore them | 
|  | */ | 
|  | if (ret != -EINVAL && ret != -ENOENT) | 
|  | return -EIO; | 
|  | else | 
|  | ret = 0; | 
|  |  | 
|  | if (VXGE_FW_VER(VXGE_CERT_FW_VER_MAJOR, VXGE_CERT_FW_VER_MINOR, 0) > | 
|  | VXGE_FW_VER(maj, min, 0)) { | 
|  | vxge_debug_init(VXGE_ERR, "%s: Firmware %d.%d.%d is too old to" | 
|  | " be used with this driver.\n" | 
|  | "Please get the latest version from " | 
|  | "ftp://ftp.s2io.com/pub/X3100-Drivers/FIRMWARE", | 
|  | VXGE_DRIVER_NAME, maj, min, bld); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devinit is_sriov_initialized(struct pci_dev *pdev) | 
|  | { | 
|  | int pos; | 
|  | u16 ctrl; | 
|  |  | 
|  | pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV); | 
|  | if (pos) { | 
|  | pci_read_config_word(pdev, pos + PCI_SRIOV_CTRL, &ctrl); | 
|  | if (ctrl & PCI_SRIOV_CTRL_VFE) | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_probe | 
|  | * @pdev : structure containing the PCI related information of the device. | 
|  | * @pre: List of PCI devices supported by the driver listed in vxge_id_table. | 
|  | * Description: | 
|  | * This function is called when a new PCI device gets detected and initializes | 
|  | * it. | 
|  | * Return value: | 
|  | * returns 0 on success and negative on failure. | 
|  | * | 
|  | */ | 
|  | static int __devinit | 
|  | vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre) | 
|  | { | 
|  | struct __vxge_hw_device *hldev; | 
|  | enum vxge_hw_status status; | 
|  | int ret; | 
|  | int high_dma = 0; | 
|  | u64 vpath_mask = 0; | 
|  | struct vxgedev *vdev; | 
|  | struct vxge_config *ll_config = NULL; | 
|  | struct vxge_hw_device_config *device_config = NULL; | 
|  | struct vxge_hw_device_attr attr; | 
|  | int i, j, no_of_vpath = 0, max_vpath_supported = 0; | 
|  | u8 *macaddr; | 
|  | struct vxge_mac_addrs *entry; | 
|  | static int bus = -1, device = -1; | 
|  | u32 host_type; | 
|  | u8 new_device = 0; | 
|  | enum vxge_hw_status is_privileged; | 
|  | u32 function_mode; | 
|  | u32 num_vfs = 0; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  | attr.pdev = pdev; | 
|  |  | 
|  | /* In SRIOV-17 mode, functions of the same adapter | 
|  | * can be deployed on different buses | 
|  | */ | 
|  | if (((bus != pdev->bus->number) || (device != PCI_SLOT(pdev->devfn))) && | 
|  | !pdev->is_virtfn) | 
|  | new_device = 1; | 
|  |  | 
|  | bus = pdev->bus->number; | 
|  | device = PCI_SLOT(pdev->devfn); | 
|  |  | 
|  | if (new_device) { | 
|  | if (driver_config->config_dev_cnt && | 
|  | (driver_config->config_dev_cnt != | 
|  | driver_config->total_dev_cnt)) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Configured %d of %d devices", | 
|  | VXGE_DRIVER_NAME, | 
|  | driver_config->config_dev_cnt, | 
|  | driver_config->total_dev_cnt); | 
|  | driver_config->config_dev_cnt = 0; | 
|  | driver_config->total_dev_cnt = 0; | 
|  | } | 
|  |  | 
|  | /* Now making the CPU based no of vpath calculation | 
|  | * applicable for individual functions as well. | 
|  | */ | 
|  | driver_config->g_no_cpus = 0; | 
|  | driver_config->vpath_per_dev = max_config_vpath; | 
|  |  | 
|  | driver_config->total_dev_cnt++; | 
|  | if (++driver_config->config_dev_cnt > max_config_dev) { | 
|  | ret = 0; | 
|  | goto _exit0; | 
|  | } | 
|  |  | 
|  | device_config = kzalloc(sizeof(struct vxge_hw_device_config), | 
|  | GFP_KERNEL); | 
|  | if (!device_config) { | 
|  | ret = -ENOMEM; | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "device_config : malloc failed %s %d", | 
|  | __FILE__, __LINE__); | 
|  | goto _exit0; | 
|  | } | 
|  |  | 
|  | ll_config = kzalloc(sizeof(struct vxge_config), GFP_KERNEL); | 
|  | if (!ll_config) { | 
|  | ret = -ENOMEM; | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "device_config : malloc failed %s %d", | 
|  | __FILE__, __LINE__); | 
|  | goto _exit0; | 
|  | } | 
|  | ll_config->tx_steering_type = TX_MULTIQ_STEERING; | 
|  | ll_config->intr_type = MSI_X; | 
|  | ll_config->napi_weight = NEW_NAPI_WEIGHT; | 
|  | ll_config->rth_steering = RTH_STEERING; | 
|  |  | 
|  | /* get the default configuration parameters */ | 
|  | vxge_hw_device_config_default_get(device_config); | 
|  |  | 
|  | /* initialize configuration parameters */ | 
|  | vxge_device_config_init(device_config, &ll_config->intr_type); | 
|  |  | 
|  | ret = pci_enable_device(pdev); | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s : can not enable PCI device", __func__); | 
|  | goto _exit0; | 
|  | } | 
|  |  | 
|  | if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s : using 64bit DMA", __func__); | 
|  |  | 
|  | high_dma = 1; | 
|  |  | 
|  | if (pci_set_consistent_dma_mask(pdev, | 
|  | DMA_BIT_MASK(64))) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s : unable to obtain 64bit DMA for " | 
|  | "consistent allocations", __func__); | 
|  | ret = -ENOMEM; | 
|  | goto _exit1; | 
|  | } | 
|  | } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s : using 32bit DMA", __func__); | 
|  | } else { | 
|  | ret = -ENOMEM; | 
|  | goto _exit1; | 
|  | } | 
|  |  | 
|  | ret = pci_request_region(pdev, 0, VXGE_DRIVER_NAME); | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s : request regions failed", __func__); | 
|  | goto _exit1; | 
|  | } | 
|  |  | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | attr.bar0 = pci_ioremap_bar(pdev, 0); | 
|  | if (!attr.bar0) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s : cannot remap io memory bar0", __func__); | 
|  | ret = -ENODEV; | 
|  | goto _exit2; | 
|  | } | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "pci ioremap bar0: %p:0x%llx", | 
|  | attr.bar0, | 
|  | (unsigned long long)pci_resource_start(pdev, 0)); | 
|  |  | 
|  | status = vxge_hw_device_hw_info_get(attr.bar0, | 
|  | &ll_config->device_hw_info); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Reading of hardware info failed." | 
|  | "Please try upgrading the firmware.", VXGE_DRIVER_NAME); | 
|  | ret = -EINVAL; | 
|  | goto _exit3; | 
|  | } | 
|  |  | 
|  | vpath_mask = ll_config->device_hw_info.vpath_mask; | 
|  | if (vpath_mask == 0) { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: No vpaths available in device", VXGE_DRIVER_NAME); | 
|  | ret = -EINVAL; | 
|  | goto _exit3; | 
|  | } | 
|  |  | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s:%d  Vpath mask = %llx", __func__, __LINE__, | 
|  | (unsigned long long)vpath_mask); | 
|  |  | 
|  | function_mode = ll_config->device_hw_info.function_mode; | 
|  | host_type = ll_config->device_hw_info.host_type; | 
|  | is_privileged = __vxge_hw_device_is_privilaged(host_type, | 
|  | ll_config->device_hw_info.func_id); | 
|  |  | 
|  | /* Check how many vpaths are available */ | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
|  | if (!((vpath_mask) & vxge_mBIT(i))) | 
|  | continue; | 
|  | max_vpath_supported++; | 
|  | } | 
|  |  | 
|  | if (new_device) | 
|  | num_vfs = vxge_get_num_vfs(function_mode) - 1; | 
|  |  | 
|  | /* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */ | 
|  | if (is_sriov(function_mode) && !is_sriov_initialized(pdev) && | 
|  | (ll_config->intr_type != INTA)) { | 
|  | ret = pci_enable_sriov(pdev, num_vfs); | 
|  | if (ret) | 
|  | vxge_debug_ll_config(VXGE_ERR, | 
|  | "Failed in enabling SRIOV mode: %d\n", ret); | 
|  | /* No need to fail out, as an error here is non-fatal */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Configure vpaths and get driver configured number of vpaths | 
|  | * which is less than or equal to the maximum vpaths per function. | 
|  | */ | 
|  | no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, ll_config); | 
|  | if (!no_of_vpath) { | 
|  | vxge_debug_ll_config(VXGE_ERR, | 
|  | "%s: No more vpaths to configure", VXGE_DRIVER_NAME); | 
|  | ret = 0; | 
|  | goto _exit3; | 
|  | } | 
|  |  | 
|  | /* Setting driver callbacks */ | 
|  | attr.uld_callbacks.link_up = vxge_callback_link_up; | 
|  | attr.uld_callbacks.link_down = vxge_callback_link_down; | 
|  | attr.uld_callbacks.crit_err = vxge_callback_crit_err; | 
|  |  | 
|  | status = vxge_hw_device_initialize(&hldev, &attr, device_config); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "Failed to initialize device (%d)", status); | 
|  | ret = -EINVAL; | 
|  | goto _exit3; | 
|  | } | 
|  |  | 
|  | if (VXGE_FW_VER(ll_config->device_hw_info.fw_version.major, | 
|  | ll_config->device_hw_info.fw_version.minor, | 
|  | ll_config->device_hw_info.fw_version.build) >= | 
|  | VXGE_EPROM_FW_VER) { | 
|  | struct eprom_image img[VXGE_HW_MAX_ROM_IMAGES]; | 
|  |  | 
|  | status = vxge_hw_vpath_eprom_img_ver_get(hldev, img); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, "%s: Reading of EPROM failed", | 
|  | VXGE_DRIVER_NAME); | 
|  | /* This is a non-fatal error, continue */ | 
|  | } | 
|  |  | 
|  | for (i = 0; i < VXGE_HW_MAX_ROM_IMAGES; i++) { | 
|  | hldev->eprom_versions[i] = img[i].version; | 
|  | if (!img[i].is_valid) | 
|  | break; | 
|  | vxge_debug_init(VXGE_TRACE, "%s: EPROM %d, version " | 
|  | "%d.%d.%d.%d", VXGE_DRIVER_NAME, i, | 
|  | VXGE_EPROM_IMG_MAJOR(img[i].version), | 
|  | VXGE_EPROM_IMG_MINOR(img[i].version), | 
|  | VXGE_EPROM_IMG_FIX(img[i].version), | 
|  | VXGE_EPROM_IMG_BUILD(img[i].version)); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* if FCS stripping is not disabled in MAC fail driver load */ | 
|  | status = vxge_hw_vpath_strip_fcs_check(hldev, vpath_mask); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, "%s: FCS stripping is enabled in MAC" | 
|  | " failing driver load", VXGE_DRIVER_NAME); | 
|  | ret = -EINVAL; | 
|  | goto _exit4; | 
|  | } | 
|  |  | 
|  | /* Always enable HWTS.  This will always cause the FCS to be invalid, | 
|  | * due to the fact that HWTS is using the FCS as the location of the | 
|  | * timestamp.  The HW FCS checking will still correctly determine if | 
|  | * there is a valid checksum, and the FCS is being removed by the driver | 
|  | * anyway.  So no fucntionality is being lost.  Since it is always | 
|  | * enabled, we now simply use the ioctl call to set whether or not the | 
|  | * driver should be paying attention to the HWTS. | 
|  | */ | 
|  | if (is_privileged == VXGE_HW_OK) { | 
|  | status = vxge_timestamp_config(hldev); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, "%s: HWTS enable failed", | 
|  | VXGE_DRIVER_NAME); | 
|  | ret = -EFAULT; | 
|  | goto _exit4; | 
|  | } | 
|  | } | 
|  |  | 
|  | vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL); | 
|  |  | 
|  | /* set private device info */ | 
|  | pci_set_drvdata(pdev, hldev); | 
|  |  | 
|  | ll_config->fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS; | 
|  | ll_config->addr_learn_en = addr_learn_en; | 
|  | ll_config->rth_algorithm = RTH_ALG_JENKINS; | 
|  | ll_config->rth_hash_type_tcpipv4 = 1; | 
|  | ll_config->rth_hash_type_ipv4 = 0; | 
|  | ll_config->rth_hash_type_tcpipv6 = 0; | 
|  | ll_config->rth_hash_type_ipv6 = 0; | 
|  | ll_config->rth_hash_type_tcpipv6ex = 0; | 
|  | ll_config->rth_hash_type_ipv6ex = 0; | 
|  | ll_config->rth_bkt_sz = RTH_BUCKET_SIZE; | 
|  | ll_config->tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE; | 
|  | ll_config->rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE; | 
|  |  | 
|  | ret = vxge_device_register(hldev, ll_config, high_dma, no_of_vpath, | 
|  | &vdev); | 
|  | if (ret) { | 
|  | ret = -EINVAL; | 
|  | goto _exit4; | 
|  | } | 
|  |  | 
|  | ret = vxge_probe_fw_update(vdev); | 
|  | if (ret) | 
|  | goto _exit5; | 
|  |  | 
|  | vxge_hw_device_debug_set(hldev, VXGE_TRACE, VXGE_COMPONENT_LL); | 
|  | VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev), | 
|  | vxge_hw_device_trace_level_get(hldev)); | 
|  |  | 
|  | /* set private HW device info */ | 
|  | vdev->mtu = VXGE_HW_DEFAULT_MTU; | 
|  | vdev->bar0 = attr.bar0; | 
|  | vdev->max_vpath_supported = max_vpath_supported; | 
|  | vdev->no_of_vpath = no_of_vpath; | 
|  |  | 
|  | /* Virtual Path count */ | 
|  | for (i = 0, j = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
|  | if (!vxge_bVALn(vpath_mask, i, 1)) | 
|  | continue; | 
|  | if (j >= vdev->no_of_vpath) | 
|  | break; | 
|  |  | 
|  | vdev->vpaths[j].is_configured = 1; | 
|  | vdev->vpaths[j].device_id = i; | 
|  | vdev->vpaths[j].ring.driver_id = j; | 
|  | vdev->vpaths[j].vdev = vdev; | 
|  | vdev->vpaths[j].max_mac_addr_cnt = max_mac_vpath; | 
|  | memcpy((u8 *)vdev->vpaths[j].macaddr, | 
|  | ll_config->device_hw_info.mac_addrs[i], | 
|  | ETH_ALEN); | 
|  |  | 
|  | /* Initialize the mac address list header */ | 
|  | INIT_LIST_HEAD(&vdev->vpaths[j].mac_addr_list); | 
|  |  | 
|  | vdev->vpaths[j].mac_addr_cnt = 0; | 
|  | vdev->vpaths[j].mcast_addr_cnt = 0; | 
|  | j++; | 
|  | } | 
|  | vdev->exec_mode = VXGE_EXEC_MODE_DISABLE; | 
|  | vdev->max_config_port = max_config_port; | 
|  |  | 
|  | vdev->vlan_tag_strip = vlan_tag_strip; | 
|  |  | 
|  | /* map the hashing selector table to the configured vpaths */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | vdev->vpath_selector[i] = vpath_selector[i]; | 
|  |  | 
|  | macaddr = (u8 *)vdev->vpaths[0].macaddr; | 
|  |  | 
|  | ll_config->device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0'; | 
|  | ll_config->device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0'; | 
|  | ll_config->device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0'; | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, "%s: SERIAL NUMBER: %s", | 
|  | vdev->ndev->name, ll_config->device_hw_info.serial_number); | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, "%s: PART NUMBER: %s", | 
|  | vdev->ndev->name, ll_config->device_hw_info.part_number); | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, "%s: Neterion %s Server Adapter", | 
|  | vdev->ndev->name, ll_config->device_hw_info.product_desc); | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, "%s: MAC ADDR: %pM", | 
|  | vdev->ndev->name, macaddr); | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, "%s: Link Width x%d", | 
|  | vdev->ndev->name, vxge_hw_device_link_width_get(hldev)); | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Firmware version : %s Date : %s", vdev->ndev->name, | 
|  | ll_config->device_hw_info.fw_version.version, | 
|  | ll_config->device_hw_info.fw_date.date); | 
|  |  | 
|  | if (new_device) { | 
|  | switch (ll_config->device_hw_info.function_mode) { | 
|  | case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Single Function Mode Enabled", vdev->ndev->name); | 
|  | break; | 
|  | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Multi Function Mode Enabled", vdev->ndev->name); | 
|  | break; | 
|  | case VXGE_HW_FUNCTION_MODE_SRIOV: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Single Root IOV Mode Enabled", vdev->ndev->name); | 
|  | break; | 
|  | case VXGE_HW_FUNCTION_MODE_MRIOV: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Multi Root IOV Mode Enabled", vdev->ndev->name); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | vxge_print_parm(vdev, vpath_mask); | 
|  |  | 
|  | /* Store the fw version for ethttool option */ | 
|  | strcpy(vdev->fw_version, ll_config->device_hw_info.fw_version.version); | 
|  | memcpy(vdev->ndev->dev_addr, (u8 *)vdev->vpaths[0].macaddr, ETH_ALEN); | 
|  | memcpy(vdev->ndev->perm_addr, vdev->ndev->dev_addr, ETH_ALEN); | 
|  |  | 
|  | /* Copy the station mac address to the list */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | entry =	kzalloc(sizeof(struct vxge_mac_addrs), GFP_KERNEL); | 
|  | if (NULL == entry) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: mac_addr_list : memory allocation failed", | 
|  | vdev->ndev->name); | 
|  | ret = -EPERM; | 
|  | goto _exit6; | 
|  | } | 
|  | macaddr = (u8 *)&entry->macaddr; | 
|  | memcpy(macaddr, vdev->ndev->dev_addr, ETH_ALEN); | 
|  | list_add(&entry->item, &vdev->vpaths[i].mac_addr_list); | 
|  | vdev->vpaths[i].mac_addr_cnt = 1; | 
|  | } | 
|  |  | 
|  | kfree(device_config); | 
|  |  | 
|  | /* | 
|  | * INTA is shared in multi-function mode. This is unlike the INTA | 
|  | * implementation in MR mode, where each VH has its own INTA message. | 
|  | * - INTA is masked (disabled) as long as at least one function sets | 
|  | * its TITAN_MASK_ALL_INT.ALARM bit. | 
|  | * - INTA is unmasked (enabled) when all enabled functions have cleared | 
|  | * their own TITAN_MASK_ALL_INT.ALARM bit. | 
|  | * The TITAN_MASK_ALL_INT ALARM & TRAFFIC bits are cleared on power up. | 
|  | * Though this driver leaves the top level interrupts unmasked while | 
|  | * leaving the required module interrupt bits masked on exit, there | 
|  | * could be a rougue driver around that does not follow this procedure | 
|  | * resulting in a failure to generate interrupts. The following code is | 
|  | * present to prevent such a failure. | 
|  | */ | 
|  |  | 
|  | if (ll_config->device_hw_info.function_mode == | 
|  | VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) | 
|  | if (vdev->config.intr_type == INTA) | 
|  | vxge_hw_device_unmask_all(hldev); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...", | 
|  | vdev->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL); | 
|  | VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev), | 
|  | vxge_hw_device_trace_level_get(hldev)); | 
|  |  | 
|  | kfree(ll_config); | 
|  | return 0; | 
|  |  | 
|  | _exit6: | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | vxge_free_mac_add_list(&vdev->vpaths[i]); | 
|  | _exit5: | 
|  | vxge_device_unregister(hldev); | 
|  | _exit4: | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | vxge_hw_device_terminate(hldev); | 
|  | pci_disable_sriov(pdev); | 
|  | _exit3: | 
|  | iounmap(attr.bar0); | 
|  | _exit2: | 
|  | pci_release_region(pdev, 0); | 
|  | _exit1: | 
|  | pci_disable_device(pdev); | 
|  | _exit0: | 
|  | kfree(ll_config); | 
|  | kfree(device_config); | 
|  | driver_config->config_dev_cnt--; | 
|  | driver_config->total_dev_cnt--; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_rem_nic - Free the PCI device | 
|  | * @pdev: structure containing the PCI related information of the device. | 
|  | * Description: This function is called by the Pci subsystem to release a | 
|  | * PCI device and free up all resource held up by the device. | 
|  | */ | 
|  | static void __devexit vxge_remove(struct pci_dev *pdev) | 
|  | { | 
|  | struct __vxge_hw_device *hldev; | 
|  | struct vxgedev *vdev; | 
|  | int i; | 
|  |  | 
|  | hldev = pci_get_drvdata(pdev); | 
|  | if (hldev == NULL) | 
|  | return; | 
|  |  | 
|  | vdev = netdev_priv(hldev->ndev); | 
|  |  | 
|  | vxge_debug_entryexit(vdev->level_trace,	"%s:%d", __func__, __LINE__); | 
|  | vxge_debug_init(vdev->level_trace, "%s : removing PCI device...", | 
|  | __func__); | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | vxge_free_mac_add_list(&vdev->vpaths[i]); | 
|  |  | 
|  | vxge_device_unregister(hldev); | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | /* Do not call pci_disable_sriov here, as it will break child devices */ | 
|  | vxge_hw_device_terminate(hldev); | 
|  | iounmap(vdev->bar0); | 
|  | pci_release_region(pdev, 0); | 
|  | pci_disable_device(pdev); | 
|  | driver_config->config_dev_cnt--; | 
|  | driver_config->total_dev_cnt--; | 
|  |  | 
|  | vxge_debug_init(vdev->level_trace, "%s:%d Device unregistered", | 
|  | __func__, __LINE__); | 
|  | vxge_debug_entryexit(vdev->level_trace,	"%s:%d  Exiting...", __func__, | 
|  | __LINE__); | 
|  | } | 
|  |  | 
|  | static struct pci_error_handlers vxge_err_handler = { | 
|  | .error_detected = vxge_io_error_detected, | 
|  | .slot_reset = vxge_io_slot_reset, | 
|  | .resume = vxge_io_resume, | 
|  | }; | 
|  |  | 
|  | static struct pci_driver vxge_driver = { | 
|  | .name = VXGE_DRIVER_NAME, | 
|  | .id_table = vxge_id_table, | 
|  | .probe = vxge_probe, | 
|  | .remove = __devexit_p(vxge_remove), | 
|  | #ifdef CONFIG_PM | 
|  | .suspend = vxge_pm_suspend, | 
|  | .resume = vxge_pm_resume, | 
|  | #endif | 
|  | .err_handler = &vxge_err_handler, | 
|  | }; | 
|  |  | 
|  | static int __init | 
|  | vxge_starter(void) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | pr_info("Copyright(c) 2002-2010 Exar Corp.\n"); | 
|  | pr_info("Driver version: %s\n", DRV_VERSION); | 
|  |  | 
|  | verify_bandwidth(); | 
|  |  | 
|  | driver_config = kzalloc(sizeof(struct vxge_drv_config), GFP_KERNEL); | 
|  | if (!driver_config) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = pci_register_driver(&vxge_driver); | 
|  | if (ret) { | 
|  | kfree(driver_config); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (driver_config->config_dev_cnt && | 
|  | (driver_config->config_dev_cnt != driver_config->total_dev_cnt)) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Configured %d of %d devices", | 
|  | VXGE_DRIVER_NAME, driver_config->config_dev_cnt, | 
|  | driver_config->total_dev_cnt); | 
|  | err: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit | 
|  | vxge_closer(void) | 
|  | { | 
|  | pci_unregister_driver(&vxge_driver); | 
|  | kfree(driver_config); | 
|  | } | 
|  | module_init(vxge_starter); | 
|  | module_exit(vxge_closer); |