|  | /* | 
|  |  | 
|  | Broadcom B43 wireless driver | 
|  |  | 
|  | G PHY LO (LocalOscillator) Measuring and Control routines | 
|  |  | 
|  | Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, | 
|  | Copyright (c) 2005, 2006 Stefano Brivio <stefano.brivio@polimi.it> | 
|  | Copyright (c) 2005-2007 Michael Buesch <mb@bu3sch.de> | 
|  | Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> | 
|  | Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 2 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; see the file COPYING.  If not, write to | 
|  | the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, | 
|  | Boston, MA 02110-1301, USA. | 
|  |  | 
|  | */ | 
|  |  | 
|  | #include "b43.h" | 
|  | #include "lo.h" | 
|  | #include "phy_g.h" | 
|  | #include "main.h" | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  |  | 
|  | static struct b43_lo_calib *b43_find_lo_calib(struct b43_txpower_lo_control *lo, | 
|  | const struct b43_bbatt *bbatt, | 
|  | const struct b43_rfatt *rfatt) | 
|  | { | 
|  | struct b43_lo_calib *c; | 
|  |  | 
|  | list_for_each_entry(c, &lo->calib_list, list) { | 
|  | if (!b43_compare_bbatt(&c->bbatt, bbatt)) | 
|  | continue; | 
|  | if (!b43_compare_rfatt(&c->rfatt, rfatt)) | 
|  | continue; | 
|  | return c; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Write the LocalOscillator Control (adjust) value-pair. */ | 
|  | static void b43_lo_write(struct b43_wldev *dev, struct b43_loctl *control) | 
|  | { | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | u16 value; | 
|  |  | 
|  | if (B43_DEBUG) { | 
|  | if (unlikely(abs(control->i) > 16 || abs(control->q) > 16)) { | 
|  | b43dbg(dev->wl, "Invalid LO control pair " | 
|  | "(I: %d, Q: %d)\n", control->i, control->q); | 
|  | dump_stack(); | 
|  | return; | 
|  | } | 
|  | } | 
|  | B43_WARN_ON(phy->type != B43_PHYTYPE_G); | 
|  |  | 
|  | value = (u8) (control->q); | 
|  | value |= ((u8) (control->i)) << 8; | 
|  | b43_phy_write(dev, B43_PHY_LO_CTL, value); | 
|  | } | 
|  |  | 
|  | static u16 lo_measure_feedthrough(struct b43_wldev *dev, | 
|  | u16 lna, u16 pga, u16 trsw_rx) | 
|  | { | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | u16 rfover; | 
|  | u16 feedthrough; | 
|  |  | 
|  | if (phy->gmode) { | 
|  | lna <<= B43_PHY_RFOVERVAL_LNA_SHIFT; | 
|  | pga <<= B43_PHY_RFOVERVAL_PGA_SHIFT; | 
|  |  | 
|  | B43_WARN_ON(lna & ~B43_PHY_RFOVERVAL_LNA); | 
|  | B43_WARN_ON(pga & ~B43_PHY_RFOVERVAL_PGA); | 
|  | /*FIXME This assertion fails		B43_WARN_ON(trsw_rx & ~(B43_PHY_RFOVERVAL_TRSWRX | | 
|  | B43_PHY_RFOVERVAL_BW)); | 
|  | */ | 
|  | trsw_rx &= (B43_PHY_RFOVERVAL_TRSWRX | B43_PHY_RFOVERVAL_BW); | 
|  |  | 
|  | /* Construct the RF Override Value */ | 
|  | rfover = B43_PHY_RFOVERVAL_UNK; | 
|  | rfover |= pga; | 
|  | rfover |= lna; | 
|  | rfover |= trsw_rx; | 
|  | if ((dev->sdev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) | 
|  | && phy->rev > 6) | 
|  | rfover |= B43_PHY_RFOVERVAL_EXTLNA; | 
|  |  | 
|  | b43_phy_write(dev, B43_PHY_PGACTL, 0xE300); | 
|  | b43_phy_write(dev, B43_PHY_RFOVERVAL, rfover); | 
|  | udelay(10); | 
|  | rfover |= B43_PHY_RFOVERVAL_BW_LBW; | 
|  | b43_phy_write(dev, B43_PHY_RFOVERVAL, rfover); | 
|  | udelay(10); | 
|  | rfover |= B43_PHY_RFOVERVAL_BW_LPF; | 
|  | b43_phy_write(dev, B43_PHY_RFOVERVAL, rfover); | 
|  | udelay(10); | 
|  | b43_phy_write(dev, B43_PHY_PGACTL, 0xF300); | 
|  | } else { | 
|  | pga |= B43_PHY_PGACTL_UNKNOWN; | 
|  | b43_phy_write(dev, B43_PHY_PGACTL, pga); | 
|  | udelay(10); | 
|  | pga |= B43_PHY_PGACTL_LOWBANDW; | 
|  | b43_phy_write(dev, B43_PHY_PGACTL, pga); | 
|  | udelay(10); | 
|  | pga |= B43_PHY_PGACTL_LPF; | 
|  | b43_phy_write(dev, B43_PHY_PGACTL, pga); | 
|  | } | 
|  | udelay(21); | 
|  | feedthrough = b43_phy_read(dev, B43_PHY_LO_LEAKAGE); | 
|  |  | 
|  | /* This is a good place to check if we need to relax a bit, | 
|  | * as this is the main function called regularly | 
|  | * in the LO calibration. */ | 
|  | cond_resched(); | 
|  |  | 
|  | return feedthrough; | 
|  | } | 
|  |  | 
|  | /* TXCTL Register and Value Table. | 
|  | * Returns the "TXCTL Register". | 
|  | * "value" is the "TXCTL Value". | 
|  | * "pad_mix_gain" is the PAD Mixer Gain. | 
|  | */ | 
|  | static u16 lo_txctl_register_table(struct b43_wldev *dev, | 
|  | u16 *value, u16 *pad_mix_gain) | 
|  | { | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | u16 reg, v, padmix; | 
|  |  | 
|  | if (phy->type == B43_PHYTYPE_B) { | 
|  | v = 0x30; | 
|  | if (phy->radio_rev <= 5) { | 
|  | reg = 0x43; | 
|  | padmix = 0; | 
|  | } else { | 
|  | reg = 0x52; | 
|  | padmix = 5; | 
|  | } | 
|  | } else { | 
|  | if (phy->rev >= 2 && phy->radio_rev == 8) { | 
|  | reg = 0x43; | 
|  | v = 0x10; | 
|  | padmix = 2; | 
|  | } else { | 
|  | reg = 0x52; | 
|  | v = 0x30; | 
|  | padmix = 5; | 
|  | } | 
|  | } | 
|  | if (value) | 
|  | *value = v; | 
|  | if (pad_mix_gain) | 
|  | *pad_mix_gain = padmix; | 
|  |  | 
|  | return reg; | 
|  | } | 
|  |  | 
|  | static void lo_measure_txctl_values(struct b43_wldev *dev) | 
|  | { | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | struct b43_phy_g *gphy = phy->g; | 
|  | struct b43_txpower_lo_control *lo = gphy->lo_control; | 
|  | u16 reg, mask; | 
|  | u16 trsw_rx, pga; | 
|  | u16 radio_pctl_reg; | 
|  |  | 
|  | static const u8 tx_bias_values[] = { | 
|  | 0x09, 0x08, 0x0A, 0x01, 0x00, | 
|  | 0x02, 0x05, 0x04, 0x06, | 
|  | }; | 
|  | static const u8 tx_magn_values[] = { | 
|  | 0x70, 0x40, | 
|  | }; | 
|  |  | 
|  | if (!has_loopback_gain(phy)) { | 
|  | radio_pctl_reg = 6; | 
|  | trsw_rx = 2; | 
|  | pga = 0; | 
|  | } else { | 
|  | int lb_gain;	/* Loopback gain (in dB) */ | 
|  |  | 
|  | trsw_rx = 0; | 
|  | lb_gain = gphy->max_lb_gain / 2; | 
|  | if (lb_gain > 10) { | 
|  | radio_pctl_reg = 0; | 
|  | pga = abs(10 - lb_gain) / 6; | 
|  | pga = clamp_val(pga, 0, 15); | 
|  | } else { | 
|  | int cmp_val; | 
|  | int tmp; | 
|  |  | 
|  | pga = 0; | 
|  | cmp_val = 0x24; | 
|  | if ((phy->rev >= 2) && | 
|  | (phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) | 
|  | cmp_val = 0x3C; | 
|  | tmp = lb_gain; | 
|  | if ((10 - lb_gain) < cmp_val) | 
|  | tmp = (10 - lb_gain); | 
|  | if (tmp < 0) | 
|  | tmp += 6; | 
|  | else | 
|  | tmp += 3; | 
|  | cmp_val /= 4; | 
|  | tmp /= 4; | 
|  | if (tmp >= cmp_val) | 
|  | radio_pctl_reg = cmp_val; | 
|  | else | 
|  | radio_pctl_reg = tmp; | 
|  | } | 
|  | } | 
|  | b43_radio_maskset(dev, 0x43, 0xFFF0, radio_pctl_reg); | 
|  | b43_gphy_set_baseband_attenuation(dev, 2); | 
|  |  | 
|  | reg = lo_txctl_register_table(dev, &mask, NULL); | 
|  | mask = ~mask; | 
|  | b43_radio_mask(dev, reg, mask); | 
|  |  | 
|  | if (has_tx_magnification(phy)) { | 
|  | int i, j; | 
|  | int feedthrough; | 
|  | int min_feedth = 0xFFFF; | 
|  | u8 tx_magn, tx_bias; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(tx_magn_values); i++) { | 
|  | tx_magn = tx_magn_values[i]; | 
|  | b43_radio_maskset(dev, 0x52, 0xFF0F, tx_magn); | 
|  | for (j = 0; j < ARRAY_SIZE(tx_bias_values); j++) { | 
|  | tx_bias = tx_bias_values[j]; | 
|  | b43_radio_maskset(dev, 0x52, 0xFFF0, tx_bias); | 
|  | feedthrough = | 
|  | lo_measure_feedthrough(dev, 0, pga, | 
|  | trsw_rx); | 
|  | if (feedthrough < min_feedth) { | 
|  | lo->tx_bias = tx_bias; | 
|  | lo->tx_magn = tx_magn; | 
|  | min_feedth = feedthrough; | 
|  | } | 
|  | if (lo->tx_bias == 0) | 
|  | break; | 
|  | } | 
|  | b43_radio_write16(dev, 0x52, | 
|  | (b43_radio_read16(dev, 0x52) | 
|  | & 0xFF00) | lo->tx_bias | lo-> | 
|  | tx_magn); | 
|  | } | 
|  | } else { | 
|  | lo->tx_magn = 0; | 
|  | lo->tx_bias = 0; | 
|  | b43_radio_mask(dev, 0x52, 0xFFF0);	/* TX bias == 0 */ | 
|  | } | 
|  | lo->txctl_measured_time = jiffies; | 
|  | } | 
|  |  | 
|  | static void lo_read_power_vector(struct b43_wldev *dev) | 
|  | { | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | struct b43_phy_g *gphy = phy->g; | 
|  | struct b43_txpower_lo_control *lo = gphy->lo_control; | 
|  | int i; | 
|  | u64 tmp; | 
|  | u64 power_vector = 0; | 
|  |  | 
|  | for (i = 0; i < 8; i += 2) { | 
|  | tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x310 + i); | 
|  | power_vector |= (tmp << (i * 8)); | 
|  | /* Clear the vector on the device. */ | 
|  | b43_shm_write16(dev, B43_SHM_SHARED, 0x310 + i, 0); | 
|  | } | 
|  | if (power_vector) | 
|  | lo->power_vector = power_vector; | 
|  | lo->pwr_vec_read_time = jiffies; | 
|  | } | 
|  |  | 
|  | /* 802.11/LO/GPHY/MeasuringGains */ | 
|  | static void lo_measure_gain_values(struct b43_wldev *dev, | 
|  | s16 max_rx_gain, int use_trsw_rx) | 
|  | { | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | struct b43_phy_g *gphy = phy->g; | 
|  | u16 tmp; | 
|  |  | 
|  | if (max_rx_gain < 0) | 
|  | max_rx_gain = 0; | 
|  |  | 
|  | if (has_loopback_gain(phy)) { | 
|  | int trsw_rx = 0; | 
|  | int trsw_rx_gain; | 
|  |  | 
|  | if (use_trsw_rx) { | 
|  | trsw_rx_gain = gphy->trsw_rx_gain / 2; | 
|  | if (max_rx_gain >= trsw_rx_gain) { | 
|  | trsw_rx_gain = max_rx_gain - trsw_rx_gain; | 
|  | trsw_rx = 0x20; | 
|  | } | 
|  | } else | 
|  | trsw_rx_gain = max_rx_gain; | 
|  | if (trsw_rx_gain < 9) { | 
|  | gphy->lna_lod_gain = 0; | 
|  | } else { | 
|  | gphy->lna_lod_gain = 1; | 
|  | trsw_rx_gain -= 8; | 
|  | } | 
|  | trsw_rx_gain = clamp_val(trsw_rx_gain, 0, 0x2D); | 
|  | gphy->pga_gain = trsw_rx_gain / 3; | 
|  | if (gphy->pga_gain >= 5) { | 
|  | gphy->pga_gain -= 5; | 
|  | gphy->lna_gain = 2; | 
|  | } else | 
|  | gphy->lna_gain = 0; | 
|  | } else { | 
|  | gphy->lna_gain = 0; | 
|  | gphy->trsw_rx_gain = 0x20; | 
|  | if (max_rx_gain >= 0x14) { | 
|  | gphy->lna_lod_gain = 1; | 
|  | gphy->pga_gain = 2; | 
|  | } else if (max_rx_gain >= 0x12) { | 
|  | gphy->lna_lod_gain = 1; | 
|  | gphy->pga_gain = 1; | 
|  | } else if (max_rx_gain >= 0xF) { | 
|  | gphy->lna_lod_gain = 1; | 
|  | gphy->pga_gain = 0; | 
|  | } else { | 
|  | gphy->lna_lod_gain = 0; | 
|  | gphy->pga_gain = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | tmp = b43_radio_read16(dev, 0x7A); | 
|  | if (gphy->lna_lod_gain == 0) | 
|  | tmp &= ~0x0008; | 
|  | else | 
|  | tmp |= 0x0008; | 
|  | b43_radio_write16(dev, 0x7A, tmp); | 
|  | } | 
|  |  | 
|  | struct lo_g_saved_values { | 
|  | u8 old_channel; | 
|  |  | 
|  | /* Core registers */ | 
|  | u16 reg_3F4; | 
|  | u16 reg_3E2; | 
|  |  | 
|  | /* PHY registers */ | 
|  | u16 phy_lo_mask; | 
|  | u16 phy_extg_01; | 
|  | u16 phy_dacctl_hwpctl; | 
|  | u16 phy_dacctl; | 
|  | u16 phy_cck_14; | 
|  | u16 phy_hpwr_tssictl; | 
|  | u16 phy_analogover; | 
|  | u16 phy_analogoverval; | 
|  | u16 phy_rfover; | 
|  | u16 phy_rfoverval; | 
|  | u16 phy_classctl; | 
|  | u16 phy_cck_3E; | 
|  | u16 phy_crs0; | 
|  | u16 phy_pgactl; | 
|  | u16 phy_cck_2A; | 
|  | u16 phy_syncctl; | 
|  | u16 phy_cck_30; | 
|  | u16 phy_cck_06; | 
|  |  | 
|  | /* Radio registers */ | 
|  | u16 radio_43; | 
|  | u16 radio_7A; | 
|  | u16 radio_52; | 
|  | }; | 
|  |  | 
|  | static void lo_measure_setup(struct b43_wldev *dev, | 
|  | struct lo_g_saved_values *sav) | 
|  | { | 
|  | struct ssb_sprom *sprom = &dev->sdev->bus->sprom; | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | struct b43_phy_g *gphy = phy->g; | 
|  | struct b43_txpower_lo_control *lo = gphy->lo_control; | 
|  | u16 tmp; | 
|  |  | 
|  | if (b43_has_hardware_pctl(dev)) { | 
|  | sav->phy_lo_mask = b43_phy_read(dev, B43_PHY_LO_MASK); | 
|  | sav->phy_extg_01 = b43_phy_read(dev, B43_PHY_EXTG(0x01)); | 
|  | sav->phy_dacctl_hwpctl = b43_phy_read(dev, B43_PHY_DACCTL); | 
|  | sav->phy_cck_14 = b43_phy_read(dev, B43_PHY_CCK(0x14)); | 
|  | sav->phy_hpwr_tssictl = b43_phy_read(dev, B43_PHY_HPWR_TSSICTL); | 
|  |  | 
|  | b43_phy_set(dev, B43_PHY_HPWR_TSSICTL, 0x100); | 
|  | b43_phy_set(dev, B43_PHY_EXTG(0x01), 0x40); | 
|  | b43_phy_set(dev, B43_PHY_DACCTL, 0x40); | 
|  | b43_phy_set(dev, B43_PHY_CCK(0x14), 0x200); | 
|  | } | 
|  | if (phy->type == B43_PHYTYPE_B && | 
|  | phy->radio_ver == 0x2050 && phy->radio_rev < 6) { | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x16), 0x410); | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x17), 0x820); | 
|  | } | 
|  | if (phy->rev >= 2) { | 
|  | sav->phy_analogover = b43_phy_read(dev, B43_PHY_ANALOGOVER); | 
|  | sav->phy_analogoverval = | 
|  | b43_phy_read(dev, B43_PHY_ANALOGOVERVAL); | 
|  | sav->phy_rfover = b43_phy_read(dev, B43_PHY_RFOVER); | 
|  | sav->phy_rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL); | 
|  | sav->phy_classctl = b43_phy_read(dev, B43_PHY_CLASSCTL); | 
|  | sav->phy_cck_3E = b43_phy_read(dev, B43_PHY_CCK(0x3E)); | 
|  | sav->phy_crs0 = b43_phy_read(dev, B43_PHY_CRS0); | 
|  |  | 
|  | b43_phy_mask(dev, B43_PHY_CLASSCTL, 0xFFFC); | 
|  | b43_phy_mask(dev, B43_PHY_CRS0, 0x7FFF); | 
|  | b43_phy_set(dev, B43_PHY_ANALOGOVER, 0x0003); | 
|  | b43_phy_mask(dev, B43_PHY_ANALOGOVERVAL, 0xFFFC); | 
|  | if (phy->type == B43_PHYTYPE_G) { | 
|  | if ((phy->rev >= 7) && | 
|  | (sprom->boardflags_lo & B43_BFL_EXTLNA)) { | 
|  | b43_phy_write(dev, B43_PHY_RFOVER, 0x933); | 
|  | } else { | 
|  | b43_phy_write(dev, B43_PHY_RFOVER, 0x133); | 
|  | } | 
|  | } else { | 
|  | b43_phy_write(dev, B43_PHY_RFOVER, 0); | 
|  | } | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x3E), 0); | 
|  | } | 
|  | sav->reg_3F4 = b43_read16(dev, 0x3F4); | 
|  | sav->reg_3E2 = b43_read16(dev, 0x3E2); | 
|  | sav->radio_43 = b43_radio_read16(dev, 0x43); | 
|  | sav->radio_7A = b43_radio_read16(dev, 0x7A); | 
|  | sav->phy_pgactl = b43_phy_read(dev, B43_PHY_PGACTL); | 
|  | sav->phy_cck_2A = b43_phy_read(dev, B43_PHY_CCK(0x2A)); | 
|  | sav->phy_syncctl = b43_phy_read(dev, B43_PHY_SYNCCTL); | 
|  | sav->phy_dacctl = b43_phy_read(dev, B43_PHY_DACCTL); | 
|  |  | 
|  | if (!has_tx_magnification(phy)) { | 
|  | sav->radio_52 = b43_radio_read16(dev, 0x52); | 
|  | sav->radio_52 &= 0x00F0; | 
|  | } | 
|  | if (phy->type == B43_PHYTYPE_B) { | 
|  | sav->phy_cck_30 = b43_phy_read(dev, B43_PHY_CCK(0x30)); | 
|  | sav->phy_cck_06 = b43_phy_read(dev, B43_PHY_CCK(0x06)); | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x30), 0x00FF); | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x06), 0x3F3F); | 
|  | } else { | 
|  | b43_write16(dev, 0x3E2, b43_read16(dev, 0x3E2) | 
|  | | 0x8000); | 
|  | } | 
|  | b43_write16(dev, 0x3F4, b43_read16(dev, 0x3F4) | 
|  | & 0xF000); | 
|  |  | 
|  | tmp = | 
|  | (phy->type == B43_PHYTYPE_G) ? B43_PHY_LO_MASK : B43_PHY_CCK(0x2E); | 
|  | b43_phy_write(dev, tmp, 0x007F); | 
|  |  | 
|  | tmp = sav->phy_syncctl; | 
|  | b43_phy_write(dev, B43_PHY_SYNCCTL, tmp & 0xFF7F); | 
|  | tmp = sav->radio_7A; | 
|  | b43_radio_write16(dev, 0x007A, tmp & 0xFFF0); | 
|  |  | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x2A), 0x8A3); | 
|  | if (phy->type == B43_PHYTYPE_G || | 
|  | (phy->type == B43_PHYTYPE_B && | 
|  | phy->radio_ver == 0x2050 && phy->radio_rev >= 6)) { | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x2B), 0x1003); | 
|  | } else | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x2B), 0x0802); | 
|  | if (phy->rev >= 2) | 
|  | b43_dummy_transmission(dev, false, true); | 
|  | b43_gphy_channel_switch(dev, 6, 0); | 
|  | b43_radio_read16(dev, 0x51);	/* dummy read */ | 
|  | if (phy->type == B43_PHYTYPE_G) | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x2F), 0); | 
|  |  | 
|  | /* Re-measure the txctl values, if needed. */ | 
|  | if (time_before(lo->txctl_measured_time, | 
|  | jiffies - B43_LO_TXCTL_EXPIRE)) | 
|  | lo_measure_txctl_values(dev); | 
|  |  | 
|  | if (phy->type == B43_PHYTYPE_G && phy->rev >= 3) { | 
|  | b43_phy_write(dev, B43_PHY_LO_MASK, 0xC078); | 
|  | } else { | 
|  | if (phy->type == B43_PHYTYPE_B) | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8078); | 
|  | else | 
|  | b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void lo_measure_restore(struct b43_wldev *dev, | 
|  | struct lo_g_saved_values *sav) | 
|  | { | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | struct b43_phy_g *gphy = phy->g; | 
|  | u16 tmp; | 
|  |  | 
|  | if (phy->rev >= 2) { | 
|  | b43_phy_write(dev, B43_PHY_PGACTL, 0xE300); | 
|  | tmp = (gphy->pga_gain << 8); | 
|  | b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA0); | 
|  | udelay(5); | 
|  | b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA2); | 
|  | udelay(2); | 
|  | b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA3); | 
|  | } else { | 
|  | tmp = (gphy->pga_gain | 0xEFA0); | 
|  | b43_phy_write(dev, B43_PHY_PGACTL, tmp); | 
|  | } | 
|  | if (phy->type == B43_PHYTYPE_G) { | 
|  | if (phy->rev >= 3) | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x2E), 0xC078); | 
|  | else | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8078); | 
|  | if (phy->rev >= 2) | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x0202); | 
|  | else | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x0101); | 
|  | } | 
|  | b43_write16(dev, 0x3F4, sav->reg_3F4); | 
|  | b43_phy_write(dev, B43_PHY_PGACTL, sav->phy_pgactl); | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x2A), sav->phy_cck_2A); | 
|  | b43_phy_write(dev, B43_PHY_SYNCCTL, sav->phy_syncctl); | 
|  | b43_phy_write(dev, B43_PHY_DACCTL, sav->phy_dacctl); | 
|  | b43_radio_write16(dev, 0x43, sav->radio_43); | 
|  | b43_radio_write16(dev, 0x7A, sav->radio_7A); | 
|  | if (!has_tx_magnification(phy)) { | 
|  | tmp = sav->radio_52; | 
|  | b43_radio_maskset(dev, 0x52, 0xFF0F, tmp); | 
|  | } | 
|  | b43_write16(dev, 0x3E2, sav->reg_3E2); | 
|  | if (phy->type == B43_PHYTYPE_B && | 
|  | phy->radio_ver == 0x2050 && phy->radio_rev <= 5) { | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x30), sav->phy_cck_30); | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x06), sav->phy_cck_06); | 
|  | } | 
|  | if (phy->rev >= 2) { | 
|  | b43_phy_write(dev, B43_PHY_ANALOGOVER, sav->phy_analogover); | 
|  | b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, | 
|  | sav->phy_analogoverval); | 
|  | b43_phy_write(dev, B43_PHY_CLASSCTL, sav->phy_classctl); | 
|  | b43_phy_write(dev, B43_PHY_RFOVER, sav->phy_rfover); | 
|  | b43_phy_write(dev, B43_PHY_RFOVERVAL, sav->phy_rfoverval); | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x3E), sav->phy_cck_3E); | 
|  | b43_phy_write(dev, B43_PHY_CRS0, sav->phy_crs0); | 
|  | } | 
|  | if (b43_has_hardware_pctl(dev)) { | 
|  | tmp = (sav->phy_lo_mask & 0xBFFF); | 
|  | b43_phy_write(dev, B43_PHY_LO_MASK, tmp); | 
|  | b43_phy_write(dev, B43_PHY_EXTG(0x01), sav->phy_extg_01); | 
|  | b43_phy_write(dev, B43_PHY_DACCTL, sav->phy_dacctl_hwpctl); | 
|  | b43_phy_write(dev, B43_PHY_CCK(0x14), sav->phy_cck_14); | 
|  | b43_phy_write(dev, B43_PHY_HPWR_TSSICTL, sav->phy_hpwr_tssictl); | 
|  | } | 
|  | b43_gphy_channel_switch(dev, sav->old_channel, 1); | 
|  | } | 
|  |  | 
|  | struct b43_lo_g_statemachine { | 
|  | int current_state; | 
|  | int nr_measured; | 
|  | int state_val_multiplier; | 
|  | u16 lowest_feedth; | 
|  | struct b43_loctl min_loctl; | 
|  | }; | 
|  |  | 
|  | /* Loop over each possible value in this state. */ | 
|  | static int lo_probe_possible_loctls(struct b43_wldev *dev, | 
|  | struct b43_loctl *probe_loctl, | 
|  | struct b43_lo_g_statemachine *d) | 
|  | { | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | struct b43_phy_g *gphy = phy->g; | 
|  | struct b43_loctl test_loctl; | 
|  | struct b43_loctl orig_loctl; | 
|  | struct b43_loctl prev_loctl = { | 
|  | .i = -100, | 
|  | .q = -100, | 
|  | }; | 
|  | int i; | 
|  | int begin, end; | 
|  | int found_lower = 0; | 
|  | u16 feedth; | 
|  |  | 
|  | static const struct b43_loctl modifiers[] = { | 
|  | {.i = 1,.q = 1,}, | 
|  | {.i = 1,.q = 0,}, | 
|  | {.i = 1,.q = -1,}, | 
|  | {.i = 0,.q = -1,}, | 
|  | {.i = -1,.q = -1,}, | 
|  | {.i = -1,.q = 0,}, | 
|  | {.i = -1,.q = 1,}, | 
|  | {.i = 0,.q = 1,}, | 
|  | }; | 
|  |  | 
|  | if (d->current_state == 0) { | 
|  | begin = 1; | 
|  | end = 8; | 
|  | } else if (d->current_state % 2 == 0) { | 
|  | begin = d->current_state - 1; | 
|  | end = d->current_state + 1; | 
|  | } else { | 
|  | begin = d->current_state - 2; | 
|  | end = d->current_state + 2; | 
|  | } | 
|  | if (begin < 1) | 
|  | begin += 8; | 
|  | if (end > 8) | 
|  | end -= 8; | 
|  |  | 
|  | memcpy(&orig_loctl, probe_loctl, sizeof(struct b43_loctl)); | 
|  | i = begin; | 
|  | d->current_state = i; | 
|  | while (1) { | 
|  | B43_WARN_ON(!(i >= 1 && i <= 8)); | 
|  | memcpy(&test_loctl, &orig_loctl, sizeof(struct b43_loctl)); | 
|  | test_loctl.i += modifiers[i - 1].i * d->state_val_multiplier; | 
|  | test_loctl.q += modifiers[i - 1].q * d->state_val_multiplier; | 
|  | if ((test_loctl.i != prev_loctl.i || | 
|  | test_loctl.q != prev_loctl.q) && | 
|  | (abs(test_loctl.i) <= 16 && abs(test_loctl.q) <= 16)) { | 
|  | b43_lo_write(dev, &test_loctl); | 
|  | feedth = lo_measure_feedthrough(dev, gphy->lna_gain, | 
|  | gphy->pga_gain, | 
|  | gphy->trsw_rx_gain); | 
|  | if (feedth < d->lowest_feedth) { | 
|  | memcpy(probe_loctl, &test_loctl, | 
|  | sizeof(struct b43_loctl)); | 
|  | found_lower = 1; | 
|  | d->lowest_feedth = feedth; | 
|  | if ((d->nr_measured < 2) && | 
|  | !has_loopback_gain(phy)) | 
|  | break; | 
|  | } | 
|  | } | 
|  | memcpy(&prev_loctl, &test_loctl, sizeof(prev_loctl)); | 
|  | if (i == end) | 
|  | break; | 
|  | if (i == 8) | 
|  | i = 1; | 
|  | else | 
|  | i++; | 
|  | d->current_state = i; | 
|  | } | 
|  |  | 
|  | return found_lower; | 
|  | } | 
|  |  | 
|  | static void lo_probe_loctls_statemachine(struct b43_wldev *dev, | 
|  | struct b43_loctl *loctl, | 
|  | int *max_rx_gain) | 
|  | { | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | struct b43_phy_g *gphy = phy->g; | 
|  | struct b43_lo_g_statemachine d; | 
|  | u16 feedth; | 
|  | int found_lower; | 
|  | struct b43_loctl probe_loctl; | 
|  | int max_repeat = 1, repeat_cnt = 0; | 
|  |  | 
|  | d.nr_measured = 0; | 
|  | d.state_val_multiplier = 1; | 
|  | if (has_loopback_gain(phy)) | 
|  | d.state_val_multiplier = 3; | 
|  |  | 
|  | memcpy(&d.min_loctl, loctl, sizeof(struct b43_loctl)); | 
|  | if (has_loopback_gain(phy)) | 
|  | max_repeat = 4; | 
|  | do { | 
|  | b43_lo_write(dev, &d.min_loctl); | 
|  | feedth = lo_measure_feedthrough(dev, gphy->lna_gain, | 
|  | gphy->pga_gain, | 
|  | gphy->trsw_rx_gain); | 
|  | if (feedth < 0x258) { | 
|  | if (feedth >= 0x12C) | 
|  | *max_rx_gain += 6; | 
|  | else | 
|  | *max_rx_gain += 3; | 
|  | feedth = lo_measure_feedthrough(dev, gphy->lna_gain, | 
|  | gphy->pga_gain, | 
|  | gphy->trsw_rx_gain); | 
|  | } | 
|  | d.lowest_feedth = feedth; | 
|  |  | 
|  | d.current_state = 0; | 
|  | do { | 
|  | B43_WARN_ON(! | 
|  | (d.current_state >= 0 | 
|  | && d.current_state <= 8)); | 
|  | memcpy(&probe_loctl, &d.min_loctl, | 
|  | sizeof(struct b43_loctl)); | 
|  | found_lower = | 
|  | lo_probe_possible_loctls(dev, &probe_loctl, &d); | 
|  | if (!found_lower) | 
|  | break; | 
|  | if ((probe_loctl.i == d.min_loctl.i) && | 
|  | (probe_loctl.q == d.min_loctl.q)) | 
|  | break; | 
|  | memcpy(&d.min_loctl, &probe_loctl, | 
|  | sizeof(struct b43_loctl)); | 
|  | d.nr_measured++; | 
|  | } while (d.nr_measured < 24); | 
|  | memcpy(loctl, &d.min_loctl, sizeof(struct b43_loctl)); | 
|  |  | 
|  | if (has_loopback_gain(phy)) { | 
|  | if (d.lowest_feedth > 0x1194) | 
|  | *max_rx_gain -= 6; | 
|  | else if (d.lowest_feedth < 0x5DC) | 
|  | *max_rx_gain += 3; | 
|  | if (repeat_cnt == 0) { | 
|  | if (d.lowest_feedth <= 0x5DC) { | 
|  | d.state_val_multiplier = 1; | 
|  | repeat_cnt++; | 
|  | } else | 
|  | d.state_val_multiplier = 2; | 
|  | } else if (repeat_cnt == 2) | 
|  | d.state_val_multiplier = 1; | 
|  | } | 
|  | lo_measure_gain_values(dev, *max_rx_gain, | 
|  | has_loopback_gain(phy)); | 
|  | } while (++repeat_cnt < max_repeat); | 
|  | } | 
|  |  | 
|  | static | 
|  | struct b43_lo_calib *b43_calibrate_lo_setting(struct b43_wldev *dev, | 
|  | const struct b43_bbatt *bbatt, | 
|  | const struct b43_rfatt *rfatt) | 
|  | { | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | struct b43_phy_g *gphy = phy->g; | 
|  | struct b43_loctl loctl = { | 
|  | .i = 0, | 
|  | .q = 0, | 
|  | }; | 
|  | int max_rx_gain; | 
|  | struct b43_lo_calib *cal; | 
|  | struct lo_g_saved_values uninitialized_var(saved_regs); | 
|  | /* Values from the "TXCTL Register and Value Table" */ | 
|  | u16 txctl_reg; | 
|  | u16 txctl_value; | 
|  | u16 pad_mix_gain; | 
|  |  | 
|  | saved_regs.old_channel = phy->channel; | 
|  | b43_mac_suspend(dev); | 
|  | lo_measure_setup(dev, &saved_regs); | 
|  |  | 
|  | txctl_reg = lo_txctl_register_table(dev, &txctl_value, &pad_mix_gain); | 
|  |  | 
|  | b43_radio_maskset(dev, 0x43, 0xFFF0, rfatt->att); | 
|  | b43_radio_maskset(dev, txctl_reg, ~txctl_value, (rfatt->with_padmix ? txctl_value :0)); | 
|  |  | 
|  | max_rx_gain = rfatt->att * 2; | 
|  | max_rx_gain += bbatt->att / 2; | 
|  | if (rfatt->with_padmix) | 
|  | max_rx_gain -= pad_mix_gain; | 
|  | if (has_loopback_gain(phy)) | 
|  | max_rx_gain += gphy->max_lb_gain; | 
|  | lo_measure_gain_values(dev, max_rx_gain, | 
|  | has_loopback_gain(phy)); | 
|  |  | 
|  | b43_gphy_set_baseband_attenuation(dev, bbatt->att); | 
|  | lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain); | 
|  |  | 
|  | lo_measure_restore(dev, &saved_regs); | 
|  | b43_mac_enable(dev); | 
|  |  | 
|  | if (b43_debug(dev, B43_DBG_LO)) { | 
|  | b43dbg(dev->wl, "LO: Calibrated for BB(%u), RF(%u,%u) " | 
|  | "=> I=%d Q=%d\n", | 
|  | bbatt->att, rfatt->att, rfatt->with_padmix, | 
|  | loctl.i, loctl.q); | 
|  | } | 
|  |  | 
|  | cal = kmalloc(sizeof(*cal), GFP_KERNEL); | 
|  | if (!cal) { | 
|  | b43warn(dev->wl, "LO calib: out of memory\n"); | 
|  | return NULL; | 
|  | } | 
|  | memcpy(&cal->bbatt, bbatt, sizeof(*bbatt)); | 
|  | memcpy(&cal->rfatt, rfatt, sizeof(*rfatt)); | 
|  | memcpy(&cal->ctl, &loctl, sizeof(loctl)); | 
|  | cal->calib_time = jiffies; | 
|  | INIT_LIST_HEAD(&cal->list); | 
|  |  | 
|  | return cal; | 
|  | } | 
|  |  | 
|  | /* Get a calibrated LO setting for the given attenuation values. | 
|  | * Might return a NULL pointer under OOM! */ | 
|  | static | 
|  | struct b43_lo_calib *b43_get_calib_lo_settings(struct b43_wldev *dev, | 
|  | const struct b43_bbatt *bbatt, | 
|  | const struct b43_rfatt *rfatt) | 
|  | { | 
|  | struct b43_txpower_lo_control *lo = dev->phy.g->lo_control; | 
|  | struct b43_lo_calib *c; | 
|  |  | 
|  | c = b43_find_lo_calib(lo, bbatt, rfatt); | 
|  | if (c) | 
|  | return c; | 
|  | /* Not in the list of calibrated LO settings. | 
|  | * Calibrate it now. */ | 
|  | c = b43_calibrate_lo_setting(dev, bbatt, rfatt); | 
|  | if (!c) | 
|  | return NULL; | 
|  | list_add(&c->list, &lo->calib_list); | 
|  |  | 
|  | return c; | 
|  | } | 
|  |  | 
|  | void b43_gphy_dc_lt_init(struct b43_wldev *dev, bool update_all) | 
|  | { | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | struct b43_phy_g *gphy = phy->g; | 
|  | struct b43_txpower_lo_control *lo = gphy->lo_control; | 
|  | int i; | 
|  | int rf_offset, bb_offset; | 
|  | const struct b43_rfatt *rfatt; | 
|  | const struct b43_bbatt *bbatt; | 
|  | u64 power_vector; | 
|  | bool table_changed = 0; | 
|  |  | 
|  | BUILD_BUG_ON(B43_DC_LT_SIZE != 32); | 
|  | B43_WARN_ON(lo->rfatt_list.len * lo->bbatt_list.len > 64); | 
|  |  | 
|  | power_vector = lo->power_vector; | 
|  | if (!update_all && !power_vector) | 
|  | return; /* Nothing to do. */ | 
|  |  | 
|  | /* Suspend the MAC now to avoid continuous suspend/enable | 
|  | * cycles in the loop. */ | 
|  | b43_mac_suspend(dev); | 
|  |  | 
|  | for (i = 0; i < B43_DC_LT_SIZE * 2; i++) { | 
|  | struct b43_lo_calib *cal; | 
|  | int idx; | 
|  | u16 val; | 
|  |  | 
|  | if (!update_all && !(power_vector & (((u64)1ULL) << i))) | 
|  | continue; | 
|  | /* Update the table entry for this power_vector bit. | 
|  | * The table rows are RFatt entries and columns are BBatt. */ | 
|  | bb_offset = i / lo->rfatt_list.len; | 
|  | rf_offset = i % lo->rfatt_list.len; | 
|  | bbatt = &(lo->bbatt_list.list[bb_offset]); | 
|  | rfatt = &(lo->rfatt_list.list[rf_offset]); | 
|  |  | 
|  | cal = b43_calibrate_lo_setting(dev, bbatt, rfatt); | 
|  | if (!cal) { | 
|  | b43warn(dev->wl, "LO: Could not " | 
|  | "calibrate DC table entry\n"); | 
|  | continue; | 
|  | } | 
|  | /*FIXME: Is Q really in the low nibble? */ | 
|  | val = (u8)(cal->ctl.q); | 
|  | val |= ((u8)(cal->ctl.i)) << 4; | 
|  | kfree(cal); | 
|  |  | 
|  | /* Get the index into the hardware DC LT. */ | 
|  | idx = i / 2; | 
|  | /* Change the table in memory. */ | 
|  | if (i % 2) { | 
|  | /* Change the high byte. */ | 
|  | lo->dc_lt[idx] = (lo->dc_lt[idx] & 0x00FF) | 
|  | | ((val & 0x00FF) << 8); | 
|  | } else { | 
|  | /* Change the low byte. */ | 
|  | lo->dc_lt[idx] = (lo->dc_lt[idx] & 0xFF00) | 
|  | | (val & 0x00FF); | 
|  | } | 
|  | table_changed = 1; | 
|  | } | 
|  | if (table_changed) { | 
|  | /* The table changed in memory. Update the hardware table. */ | 
|  | for (i = 0; i < B43_DC_LT_SIZE; i++) | 
|  | b43_phy_write(dev, 0x3A0 + i, lo->dc_lt[i]); | 
|  | } | 
|  | b43_mac_enable(dev); | 
|  | } | 
|  |  | 
|  | /* Fixup the RF attenuation value for the case where we are | 
|  | * using the PAD mixer. */ | 
|  | static inline void b43_lo_fixup_rfatt(struct b43_rfatt *rf) | 
|  | { | 
|  | if (!rf->with_padmix) | 
|  | return; | 
|  | if ((rf->att != 1) && (rf->att != 2) && (rf->att != 3)) | 
|  | rf->att = 4; | 
|  | } | 
|  |  | 
|  | void b43_lo_g_adjust(struct b43_wldev *dev) | 
|  | { | 
|  | struct b43_phy_g *gphy = dev->phy.g; | 
|  | struct b43_lo_calib *cal; | 
|  | struct b43_rfatt rf; | 
|  |  | 
|  | memcpy(&rf, &gphy->rfatt, sizeof(rf)); | 
|  | b43_lo_fixup_rfatt(&rf); | 
|  |  | 
|  | cal = b43_get_calib_lo_settings(dev, &gphy->bbatt, &rf); | 
|  | if (!cal) | 
|  | return; | 
|  | b43_lo_write(dev, &cal->ctl); | 
|  | } | 
|  |  | 
|  | void b43_lo_g_adjust_to(struct b43_wldev *dev, | 
|  | u16 rfatt, u16 bbatt, u16 tx_control) | 
|  | { | 
|  | struct b43_rfatt rf; | 
|  | struct b43_bbatt bb; | 
|  | struct b43_lo_calib *cal; | 
|  |  | 
|  | memset(&rf, 0, sizeof(rf)); | 
|  | memset(&bb, 0, sizeof(bb)); | 
|  | rf.att = rfatt; | 
|  | bb.att = bbatt; | 
|  | b43_lo_fixup_rfatt(&rf); | 
|  | cal = b43_get_calib_lo_settings(dev, &bb, &rf); | 
|  | if (!cal) | 
|  | return; | 
|  | b43_lo_write(dev, &cal->ctl); | 
|  | } | 
|  |  | 
|  | /* Periodic LO maintanance work */ | 
|  | void b43_lo_g_maintanance_work(struct b43_wldev *dev) | 
|  | { | 
|  | struct b43_phy *phy = &dev->phy; | 
|  | struct b43_phy_g *gphy = phy->g; | 
|  | struct b43_txpower_lo_control *lo = gphy->lo_control; | 
|  | unsigned long now; | 
|  | unsigned long expire; | 
|  | struct b43_lo_calib *cal, *tmp; | 
|  | bool current_item_expired = 0; | 
|  | bool hwpctl; | 
|  |  | 
|  | if (!lo) | 
|  | return; | 
|  | now = jiffies; | 
|  | hwpctl = b43_has_hardware_pctl(dev); | 
|  |  | 
|  | if (hwpctl) { | 
|  | /* Read the power vector and update it, if needed. */ | 
|  | expire = now - B43_LO_PWRVEC_EXPIRE; | 
|  | if (time_before(lo->pwr_vec_read_time, expire)) { | 
|  | lo_read_power_vector(dev); | 
|  | b43_gphy_dc_lt_init(dev, 0); | 
|  | } | 
|  | //FIXME Recalc the whole DC table from time to time? | 
|  | } | 
|  |  | 
|  | if (hwpctl) | 
|  | return; | 
|  | /* Search for expired LO settings. Remove them. | 
|  | * Recalibrate the current setting, if expired. */ | 
|  | expire = now - B43_LO_CALIB_EXPIRE; | 
|  | list_for_each_entry_safe(cal, tmp, &lo->calib_list, list) { | 
|  | if (!time_before(cal->calib_time, expire)) | 
|  | continue; | 
|  | /* This item expired. */ | 
|  | if (b43_compare_bbatt(&cal->bbatt, &gphy->bbatt) && | 
|  | b43_compare_rfatt(&cal->rfatt, &gphy->rfatt)) { | 
|  | B43_WARN_ON(current_item_expired); | 
|  | current_item_expired = 1; | 
|  | } | 
|  | if (b43_debug(dev, B43_DBG_LO)) { | 
|  | b43dbg(dev->wl, "LO: Item BB(%u), RF(%u,%u), " | 
|  | "I=%d, Q=%d expired\n", | 
|  | cal->bbatt.att, cal->rfatt.att, | 
|  | cal->rfatt.with_padmix, | 
|  | cal->ctl.i, cal->ctl.q); | 
|  | } | 
|  | list_del(&cal->list); | 
|  | kfree(cal); | 
|  | } | 
|  | if (current_item_expired || unlikely(list_empty(&lo->calib_list))) { | 
|  | /* Recalibrate currently used LO setting. */ | 
|  | if (b43_debug(dev, B43_DBG_LO)) | 
|  | b43dbg(dev->wl, "LO: Recalibrating current LO setting\n"); | 
|  | cal = b43_calibrate_lo_setting(dev, &gphy->bbatt, &gphy->rfatt); | 
|  | if (cal) { | 
|  | list_add(&cal->list, &lo->calib_list); | 
|  | b43_lo_write(dev, &cal->ctl); | 
|  | } else | 
|  | b43warn(dev->wl, "Failed to recalibrate current LO setting\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | void b43_lo_g_cleanup(struct b43_wldev *dev) | 
|  | { | 
|  | struct b43_txpower_lo_control *lo = dev->phy.g->lo_control; | 
|  | struct b43_lo_calib *cal, *tmp; | 
|  |  | 
|  | if (!lo) | 
|  | return; | 
|  | list_for_each_entry_safe(cal, tmp, &lo->calib_list, list) { | 
|  | list_del(&cal->list); | 
|  | kfree(cal); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* LO Initialization */ | 
|  | void b43_lo_g_init(struct b43_wldev *dev) | 
|  | { | 
|  | if (b43_has_hardware_pctl(dev)) { | 
|  | lo_read_power_vector(dev); | 
|  | b43_gphy_dc_lt_init(dev, 1); | 
|  | } | 
|  | } |