|  | /****************************************************************************** | 
|  | * | 
|  | * GPL LICENSE SUMMARY | 
|  | * | 
|  | * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, | 
|  | * USA | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution | 
|  | * in the file called LICENSE.GPL. | 
|  | * | 
|  | * Contact Information: | 
|  | *  Intel Linux Wireless <ilw@linux.intel.com> | 
|  | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/sched.h> | 
|  |  | 
|  | #include "iwl-dev.h" | 
|  | #include "iwl-core.h" | 
|  | #include "iwl-io.h" | 
|  | #include "iwl-agn.h" | 
|  |  | 
|  | int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant) | 
|  | { | 
|  | struct iwl_tx_ant_config_cmd tx_ant_cmd = { | 
|  | .valid = cpu_to_le32(valid_tx_ant), | 
|  | }; | 
|  |  | 
|  | if (IWL_UCODE_API(priv->ucode_ver) > 1) { | 
|  | IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant); | 
|  | return iwl_send_cmd_pdu(priv, TX_ANT_CONFIGURATION_CMD, | 
|  | sizeof(struct iwl_tx_ant_config_cmd), | 
|  | &tx_ant_cmd); | 
|  | } else { | 
|  | IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n"); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | } | 
|  |  | 
|  | static u16 iwlagn_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data) | 
|  | { | 
|  | u16 size = (u16)sizeof(struct iwl_addsta_cmd); | 
|  | struct iwl_addsta_cmd *addsta = (struct iwl_addsta_cmd *)data; | 
|  | memcpy(addsta, cmd, size); | 
|  | /* resrved in 5000 */ | 
|  | addsta->rate_n_flags = cpu_to_le16(0); | 
|  | return size; | 
|  | } | 
|  |  | 
|  | static void iwlagn_gain_computation(struct iwl_priv *priv, | 
|  | u32 average_noise[NUM_RX_CHAINS], | 
|  | u16 min_average_noise_antenna_i, | 
|  | u32 min_average_noise, | 
|  | u8 default_chain) | 
|  | { | 
|  | int i; | 
|  | s32 delta_g; | 
|  | struct iwl_chain_noise_data *data = &priv->chain_noise_data; | 
|  |  | 
|  | /* | 
|  | * Find Gain Code for the chains based on "default chain" | 
|  | */ | 
|  | for (i = default_chain + 1; i < NUM_RX_CHAINS; i++) { | 
|  | if ((data->disconn_array[i])) { | 
|  | data->delta_gain_code[i] = 0; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | delta_g = (priv->cfg->base_params->chain_noise_scale * | 
|  | ((s32)average_noise[default_chain] - | 
|  | (s32)average_noise[i])) / 1500; | 
|  |  | 
|  | /* bound gain by 2 bits value max, 3rd bit is sign */ | 
|  | data->delta_gain_code[i] = | 
|  | min(abs(delta_g), (long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE); | 
|  |  | 
|  | if (delta_g < 0) | 
|  | /* | 
|  | * set negative sign ... | 
|  | * note to Intel developers:  This is uCode API format, | 
|  | *   not the format of any internal device registers. | 
|  | *   Do not change this format for e.g. 6050 or similar | 
|  | *   devices.  Change format only if more resolution | 
|  | *   (i.e. more than 2 bits magnitude) is needed. | 
|  | */ | 
|  | data->delta_gain_code[i] |= (1 << 2); | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_CALIB(priv, "Delta gains: ANT_B = %d  ANT_C = %d\n", | 
|  | data->delta_gain_code[1], data->delta_gain_code[2]); | 
|  |  | 
|  | if (!data->radio_write) { | 
|  | struct iwl_calib_chain_noise_gain_cmd cmd; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  |  | 
|  | cmd.hdr.op_code = priv->_agn.phy_calib_chain_noise_gain_cmd; | 
|  | cmd.hdr.first_group = 0; | 
|  | cmd.hdr.groups_num = 1; | 
|  | cmd.hdr.data_valid = 1; | 
|  | cmd.delta_gain_1 = data->delta_gain_code[1]; | 
|  | cmd.delta_gain_2 = data->delta_gain_code[2]; | 
|  | iwl_send_cmd_pdu_async(priv, REPLY_PHY_CALIBRATION_CMD, | 
|  | sizeof(cmd), &cmd, NULL); | 
|  |  | 
|  | data->radio_write = 1; | 
|  | data->state = IWL_CHAIN_NOISE_CALIBRATED; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void iwlagn_chain_noise_reset(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_chain_noise_data *data = &priv->chain_noise_data; | 
|  | int ret; | 
|  |  | 
|  | if ((data->state == IWL_CHAIN_NOISE_ALIVE) && | 
|  | iwl_is_any_associated(priv)) { | 
|  | struct iwl_calib_chain_noise_reset_cmd cmd; | 
|  |  | 
|  | /* clear data for chain noise calibration algorithm */ | 
|  | data->chain_noise_a = 0; | 
|  | data->chain_noise_b = 0; | 
|  | data->chain_noise_c = 0; | 
|  | data->chain_signal_a = 0; | 
|  | data->chain_signal_b = 0; | 
|  | data->chain_signal_c = 0; | 
|  | data->beacon_count = 0; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.hdr.op_code = priv->_agn.phy_calib_chain_noise_reset_cmd; | 
|  | cmd.hdr.first_group = 0; | 
|  | cmd.hdr.groups_num = 1; | 
|  | cmd.hdr.data_valid = 1; | 
|  | ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, | 
|  | sizeof(cmd), &cmd); | 
|  | if (ret) | 
|  | IWL_ERR(priv, | 
|  | "Could not send REPLY_PHY_CALIBRATION_CMD\n"); | 
|  | data->state = IWL_CHAIN_NOISE_ACCUMULATE; | 
|  | IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void iwlagn_tx_cmd_protection(struct iwl_priv *priv, | 
|  | struct ieee80211_tx_info *info, | 
|  | __le16 fc, __le32 *tx_flags) | 
|  | { | 
|  | if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS || | 
|  | info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT || | 
|  | info->flags & IEEE80211_TX_CTL_AMPDU) | 
|  | *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK; | 
|  | } | 
|  |  | 
|  | /* Calc max signal level (dBm) among 3 possible receivers */ | 
|  | static int iwlagn_calc_rssi(struct iwl_priv *priv, | 
|  | struct iwl_rx_phy_res *rx_resp) | 
|  | { | 
|  | /* data from PHY/DSP regarding signal strength, etc., | 
|  | *   contents are always there, not configurable by host | 
|  | */ | 
|  | struct iwlagn_non_cfg_phy *ncphy = | 
|  | (struct iwlagn_non_cfg_phy *)rx_resp->non_cfg_phy_buf; | 
|  | u32 val, rssi_a, rssi_b, rssi_c, max_rssi; | 
|  | u8 agc; | 
|  |  | 
|  | val  = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_AGC_IDX]); | 
|  | agc = (val & IWLAGN_OFDM_AGC_MSK) >> IWLAGN_OFDM_AGC_BIT_POS; | 
|  |  | 
|  | /* Find max rssi among 3 possible receivers. | 
|  | * These values are measured by the digital signal processor (DSP). | 
|  | * They should stay fairly constant even as the signal strength varies, | 
|  | *   if the radio's automatic gain control (AGC) is working right. | 
|  | * AGC value (see below) will provide the "interesting" info. | 
|  | */ | 
|  | val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_RSSI_AB_IDX]); | 
|  | rssi_a = (val & IWLAGN_OFDM_RSSI_INBAND_A_BITMSK) >> | 
|  | IWLAGN_OFDM_RSSI_A_BIT_POS; | 
|  | rssi_b = (val & IWLAGN_OFDM_RSSI_INBAND_B_BITMSK) >> | 
|  | IWLAGN_OFDM_RSSI_B_BIT_POS; | 
|  | val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_RSSI_C_IDX]); | 
|  | rssi_c = (val & IWLAGN_OFDM_RSSI_INBAND_C_BITMSK) >> | 
|  | IWLAGN_OFDM_RSSI_C_BIT_POS; | 
|  |  | 
|  | max_rssi = max_t(u32, rssi_a, rssi_b); | 
|  | max_rssi = max_t(u32, max_rssi, rssi_c); | 
|  |  | 
|  | IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n", | 
|  | rssi_a, rssi_b, rssi_c, max_rssi, agc); | 
|  |  | 
|  | /* dBm = max_rssi dB - agc dB - constant. | 
|  | * Higher AGC (higher radio gain) means lower signal. */ | 
|  | return max_rssi - agc - IWLAGN_RSSI_OFFSET; | 
|  | } | 
|  |  | 
|  | static int iwlagn_set_pan_params(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_wipan_params_cmd cmd; | 
|  | struct iwl_rxon_context *ctx_bss, *ctx_pan; | 
|  | int slot0 = 300, slot1 = 0; | 
|  | int ret; | 
|  |  | 
|  | if (priv->valid_contexts == BIT(IWL_RXON_CTX_BSS)) | 
|  | return 0; | 
|  |  | 
|  | BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | ctx_bss = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  | ctx_pan = &priv->contexts[IWL_RXON_CTX_PAN]; | 
|  |  | 
|  | /* | 
|  | * If the PAN context is inactive, then we don't need | 
|  | * to update the PAN parameters, the last thing we'll | 
|  | * have done before it goes inactive is making the PAN | 
|  | * parameters be WLAN-only. | 
|  | */ | 
|  | if (!ctx_pan->is_active) | 
|  | return 0; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  |  | 
|  | /* only 2 slots are currently allowed */ | 
|  | cmd.num_slots = 2; | 
|  |  | 
|  | cmd.slots[0].type = 0; /* BSS */ | 
|  | cmd.slots[1].type = 1; /* PAN */ | 
|  |  | 
|  | if (priv->_agn.hw_roc_channel) { | 
|  | /* both contexts must be used for this to happen */ | 
|  | slot1 = priv->_agn.hw_roc_duration; | 
|  | slot0 = IWL_MIN_SLOT_TIME; | 
|  | } else if (ctx_bss->vif && ctx_pan->vif) { | 
|  | int bcnint = ctx_pan->vif->bss_conf.beacon_int; | 
|  | int dtim = ctx_pan->vif->bss_conf.dtim_period ?: 1; | 
|  |  | 
|  | /* should be set, but seems unused?? */ | 
|  | cmd.flags |= cpu_to_le16(IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE); | 
|  |  | 
|  | if (ctx_pan->vif->type == NL80211_IFTYPE_AP && | 
|  | bcnint && | 
|  | bcnint != ctx_bss->vif->bss_conf.beacon_int) { | 
|  | IWL_ERR(priv, | 
|  | "beacon intervals don't match (%d, %d)\n", | 
|  | ctx_bss->vif->bss_conf.beacon_int, | 
|  | ctx_pan->vif->bss_conf.beacon_int); | 
|  | } else | 
|  | bcnint = max_t(int, bcnint, | 
|  | ctx_bss->vif->bss_conf.beacon_int); | 
|  | if (!bcnint) | 
|  | bcnint = DEFAULT_BEACON_INTERVAL; | 
|  | slot0 = bcnint / 2; | 
|  | slot1 = bcnint - slot0; | 
|  |  | 
|  | if (test_bit(STATUS_SCAN_HW, &priv->status) || | 
|  | (!ctx_bss->vif->bss_conf.idle && | 
|  | !ctx_bss->vif->bss_conf.assoc)) { | 
|  | slot0 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME; | 
|  | slot1 = IWL_MIN_SLOT_TIME; | 
|  | } else if (!ctx_pan->vif->bss_conf.idle && | 
|  | !ctx_pan->vif->bss_conf.assoc) { | 
|  | slot1 = bcnint * 3 - IWL_MIN_SLOT_TIME; | 
|  | slot0 = IWL_MIN_SLOT_TIME; | 
|  | } | 
|  | } else if (ctx_pan->vif) { | 
|  | slot0 = 0; | 
|  | slot1 = max_t(int, 1, ctx_pan->vif->bss_conf.dtim_period) * | 
|  | ctx_pan->vif->bss_conf.beacon_int; | 
|  | slot1 = max_t(int, DEFAULT_BEACON_INTERVAL, slot1); | 
|  |  | 
|  | if (test_bit(STATUS_SCAN_HW, &priv->status)) { | 
|  | slot0 = slot1 * 3 - IWL_MIN_SLOT_TIME; | 
|  | slot1 = IWL_MIN_SLOT_TIME; | 
|  | } | 
|  | } | 
|  |  | 
|  | cmd.slots[0].width = cpu_to_le16(slot0); | 
|  | cmd.slots[1].width = cpu_to_le16(slot1); | 
|  |  | 
|  | ret = iwl_send_cmd_pdu(priv, REPLY_WIPAN_PARAMS, sizeof(cmd), &cmd); | 
|  | if (ret) | 
|  | IWL_ERR(priv, "Error setting PAN parameters (%d)\n", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | struct iwl_hcmd_ops iwlagn_hcmd = { | 
|  | .commit_rxon = iwlagn_commit_rxon, | 
|  | .set_rxon_chain = iwlagn_set_rxon_chain, | 
|  | .set_tx_ant = iwlagn_send_tx_ant_config, | 
|  | .send_bt_config = iwl_send_bt_config, | 
|  | .set_pan_params = iwlagn_set_pan_params, | 
|  | }; | 
|  |  | 
|  | struct iwl_hcmd_ops iwlagn_bt_hcmd = { | 
|  | .commit_rxon = iwlagn_commit_rxon, | 
|  | .set_rxon_chain = iwlagn_set_rxon_chain, | 
|  | .set_tx_ant = iwlagn_send_tx_ant_config, | 
|  | .send_bt_config = iwlagn_send_advance_bt_config, | 
|  | .set_pan_params = iwlagn_set_pan_params, | 
|  | }; | 
|  |  | 
|  | struct iwl_hcmd_utils_ops iwlagn_hcmd_utils = { | 
|  | .build_addsta_hcmd = iwlagn_build_addsta_hcmd, | 
|  | .gain_computation = iwlagn_gain_computation, | 
|  | .chain_noise_reset = iwlagn_chain_noise_reset, | 
|  | .tx_cmd_protection = iwlagn_tx_cmd_protection, | 
|  | .calc_rssi = iwlagn_calc_rssi, | 
|  | .request_scan = iwlagn_request_scan, | 
|  | .post_scan = iwlagn_post_scan, | 
|  | }; |