|  | /****************************************************************************** | 
|  | * | 
|  | * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., | 
|  | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution in the | 
|  | * file called LICENSE. | 
|  | * | 
|  | * Contact Information: | 
|  | *  Intel Linux Wireless <ilw@linux.intel.com> | 
|  | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  | * | 
|  | *****************************************************************************/ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/wireless.h> | 
|  | #include <net/mac80211.h> | 
|  |  | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/delay.h> | 
|  |  | 
|  | #include <linux/workqueue.h> | 
|  |  | 
|  | #include "iwl-dev.h" | 
|  | #include "iwl-sta.h" | 
|  | #include "iwl-core.h" | 
|  | #include "iwl-agn.h" | 
|  |  | 
|  | #define RS_NAME "iwl-agn-rs" | 
|  |  | 
|  | #define NUM_TRY_BEFORE_ANT_TOGGLE 1 | 
|  | #define IWL_NUMBER_TRY      1 | 
|  | #define IWL_HT_NUMBER_TRY   3 | 
|  |  | 
|  | #define IWL_RATE_MAX_WINDOW		62	/* # tx in history window */ | 
|  | #define IWL_RATE_MIN_FAILURE_TH		6	/* min failures to calc tpt */ | 
|  | #define IWL_RATE_MIN_SUCCESS_TH		8	/* min successes to calc tpt */ | 
|  |  | 
|  | /* max allowed rate miss before sync LQ cmd */ | 
|  | #define IWL_MISSED_RATE_MAX		15 | 
|  | /* max time to accum history 2 seconds */ | 
|  | #define IWL_RATE_SCALE_FLUSH_INTVL   (3*HZ) | 
|  |  | 
|  | static u8 rs_ht_to_legacy[] = { | 
|  | IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, | 
|  | IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, | 
|  | IWL_RATE_6M_INDEX, | 
|  | IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX, | 
|  | IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX, | 
|  | IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX, | 
|  | IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX | 
|  | }; | 
|  |  | 
|  | static const u8 ant_toggle_lookup[] = { | 
|  | /*ANT_NONE -> */ ANT_NONE, | 
|  | /*ANT_A    -> */ ANT_B, | 
|  | /*ANT_B    -> */ ANT_C, | 
|  | /*ANT_AB   -> */ ANT_BC, | 
|  | /*ANT_C    -> */ ANT_A, | 
|  | /*ANT_AC   -> */ ANT_AB, | 
|  | /*ANT_BC   -> */ ANT_AC, | 
|  | /*ANT_ABC  -> */ ANT_ABC, | 
|  | }; | 
|  |  | 
|  | #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np)    \ | 
|  | [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,      \ | 
|  | IWL_RATE_SISO_##s##M_PLCP, \ | 
|  | IWL_RATE_MIMO2_##s##M_PLCP,\ | 
|  | IWL_RATE_MIMO3_##s##M_PLCP,\ | 
|  | IWL_RATE_##r##M_IEEE,      \ | 
|  | IWL_RATE_##ip##M_INDEX,    \ | 
|  | IWL_RATE_##in##M_INDEX,    \ | 
|  | IWL_RATE_##rp##M_INDEX,    \ | 
|  | IWL_RATE_##rn##M_INDEX,    \ | 
|  | IWL_RATE_##pp##M_INDEX,    \ | 
|  | IWL_RATE_##np##M_INDEX } | 
|  |  | 
|  | /* | 
|  | * Parameter order: | 
|  | *   rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate | 
|  | * | 
|  | * If there isn't a valid next or previous rate then INV is used which | 
|  | * maps to IWL_RATE_INVALID | 
|  | * | 
|  | */ | 
|  | const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = { | 
|  | IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2),    /*  1mbps */ | 
|  | IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5),          /*  2mbps */ | 
|  | IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11),        /*5.5mbps */ | 
|  | IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18),      /* 11mbps */ | 
|  | IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11),        /*  6mbps */ | 
|  | IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11),       /*  9mbps */ | 
|  | IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18),   /* 12mbps */ | 
|  | IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24),   /* 18mbps */ | 
|  | IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36),   /* 24mbps */ | 
|  | IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48),   /* 36mbps */ | 
|  | IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54),   /* 48mbps */ | 
|  | IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ | 
|  | IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ | 
|  | /* FIXME:RS:          ^^    should be INV (legacy) */ | 
|  | }; | 
|  |  | 
|  | static inline u8 rs_extract_rate(u32 rate_n_flags) | 
|  | { | 
|  | return (u8)(rate_n_flags & RATE_MCS_RATE_MSK); | 
|  | } | 
|  |  | 
|  | static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) | 
|  | { | 
|  | int idx = 0; | 
|  |  | 
|  | /* HT rate format */ | 
|  | if (rate_n_flags & RATE_MCS_HT_MSK) { | 
|  | idx = rs_extract_rate(rate_n_flags); | 
|  |  | 
|  | if (idx >= IWL_RATE_MIMO3_6M_PLCP) | 
|  | idx = idx - IWL_RATE_MIMO3_6M_PLCP; | 
|  | else if (idx >= IWL_RATE_MIMO2_6M_PLCP) | 
|  | idx = idx - IWL_RATE_MIMO2_6M_PLCP; | 
|  |  | 
|  | idx += IWL_FIRST_OFDM_RATE; | 
|  | /* skip 9M not supported in ht*/ | 
|  | if (idx >= IWL_RATE_9M_INDEX) | 
|  | idx += 1; | 
|  | if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE)) | 
|  | return idx; | 
|  |  | 
|  | /* legacy rate format, search for match in table */ | 
|  | } else { | 
|  | for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) | 
|  | if (iwl_rates[idx].plcp == | 
|  | rs_extract_rate(rate_n_flags)) | 
|  | return idx; | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void rs_rate_scale_perform(struct iwl_priv *priv, | 
|  | struct sk_buff *skb, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta); | 
|  | static void rs_fill_link_cmd(struct iwl_priv *priv, | 
|  | struct iwl_lq_sta *lq_sta, u32 rate_n_flags); | 
|  | static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search); | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, | 
|  | u32 *rate_n_flags, int index); | 
|  | #else | 
|  | static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, | 
|  | u32 *rate_n_flags, int index) | 
|  | {} | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * The following tables contain the expected throughput metrics for all rates | 
|  | * | 
|  | *	1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits | 
|  | * | 
|  | * where invalid entries are zeros. | 
|  | * | 
|  | * CCK rates are only valid in legacy table and will only be used in G | 
|  | * (2.4 GHz) band. | 
|  | */ | 
|  |  | 
|  | static s32 expected_tpt_legacy[IWL_RATE_COUNT] = { | 
|  | 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0 | 
|  | }; | 
|  |  | 
|  | static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0, 42, 0,  76, 102, 124, 159, 183, 193, 202}, /* Norm */ | 
|  | {0, 0, 0, 0, 46, 0,  82, 110, 132, 168, 192, 202, 210}, /* SGI */ | 
|  | {0, 0, 0, 0, 47, 0,  91, 133, 171, 242, 305, 334, 362}, /* AGG */ | 
|  | {0, 0, 0, 0, 52, 0, 101, 145, 187, 264, 330, 361, 390}, /* AGG+SGI */ | 
|  | }; | 
|  |  | 
|  | static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0,  77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */ | 
|  | {0, 0, 0, 0,  83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */ | 
|  | {0, 0, 0, 0,  94, 0, 177, 249, 313, 423, 512, 550, 586}, /* AGG */ | 
|  | {0, 0, 0, 0, 104, 0, 193, 270, 338, 454, 545, 584, 620}, /* AGG+SGI */ | 
|  | }; | 
|  |  | 
|  | static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0,  74, 0, 123, 155, 179, 214, 236, 244, 251}, /* Norm */ | 
|  | {0, 0, 0, 0,  81, 0, 131, 164, 188, 223, 243, 251, 257}, /* SGI */ | 
|  | {0, 0, 0, 0,  89, 0, 167, 235, 296, 402, 488, 526, 560}, /* AGG */ | 
|  | {0, 0, 0, 0,  97, 0, 182, 255, 320, 431, 520, 558, 593}, /* AGG+SGI*/ | 
|  | }; | 
|  |  | 
|  | static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */ | 
|  | {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */ | 
|  | {0, 0, 0, 0, 171, 0, 305, 410, 496, 634, 731, 771, 805}, /* AGG */ | 
|  | {0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */ | 
|  | }; | 
|  |  | 
|  | static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0,  99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */ | 
|  | {0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */ | 
|  | {0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */ | 
|  | {0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */ | 
|  | }; | 
|  |  | 
|  | static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = { | 
|  | {0, 0, 0, 0, 152, 0, 211, 239, 255, 279,  290,  294,  297}, /* Norm */ | 
|  | {0, 0, 0, 0, 160, 0, 219, 245, 261, 284,  294,  297,  300}, /* SGI */ | 
|  | {0, 0, 0, 0, 254, 0, 443, 584, 695, 868,  984, 1030, 1070}, /* AGG */ | 
|  | {0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */ | 
|  | }; | 
|  |  | 
|  | /* mbps, mcs */ | 
|  | static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { | 
|  | {  "1", "BPSK DSSS"}, | 
|  | {  "2", "QPSK DSSS"}, | 
|  | {"5.5", "BPSK CCK"}, | 
|  | { "11", "QPSK CCK"}, | 
|  | {  "6", "BPSK 1/2"}, | 
|  | {  "9", "BPSK 1/2"}, | 
|  | { "12", "QPSK 1/2"}, | 
|  | { "18", "QPSK 3/4"}, | 
|  | { "24", "16QAM 1/2"}, | 
|  | { "36", "16QAM 3/4"}, | 
|  | { "48", "64QAM 2/3"}, | 
|  | { "54", "64QAM 3/4"}, | 
|  | { "60", "64QAM 5/6"}, | 
|  | }; | 
|  |  | 
|  | #define MCS_INDEX_PER_STREAM	(8) | 
|  |  | 
|  | static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) | 
|  | { | 
|  | window->data = 0; | 
|  | window->success_counter = 0; | 
|  | window->success_ratio = IWL_INVALID_VALUE; | 
|  | window->counter = 0; | 
|  | window->average_tpt = IWL_INVALID_VALUE; | 
|  | window->stamp = 0; | 
|  | } | 
|  |  | 
|  | static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) | 
|  | { | 
|  | return (ant_type & valid_antenna) == ant_type; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	removes the old data from the statistics. All data that is older than | 
|  | *	TID_MAX_TIME_DIFF, will be deleted. | 
|  | */ | 
|  | static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time) | 
|  | { | 
|  | /* The oldest age we want to keep */ | 
|  | u32 oldest_time = curr_time - TID_MAX_TIME_DIFF; | 
|  |  | 
|  | while (tl->queue_count && | 
|  | (tl->time_stamp < oldest_time)) { | 
|  | tl->total -= tl->packet_count[tl->head]; | 
|  | tl->packet_count[tl->head] = 0; | 
|  | tl->time_stamp += TID_QUEUE_CELL_SPACING; | 
|  | tl->queue_count--; | 
|  | tl->head++; | 
|  | if (tl->head >= TID_QUEUE_MAX_SIZE) | 
|  | tl->head = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	increment traffic load value for tid and also remove | 
|  | *	any old values if passed the certain time period | 
|  | */ | 
|  | static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data, | 
|  | struct ieee80211_hdr *hdr) | 
|  | { | 
|  | u32 curr_time = jiffies_to_msecs(jiffies); | 
|  | u32 time_diff; | 
|  | s32 index; | 
|  | struct iwl_traffic_load *tl = NULL; | 
|  | u8 tid; | 
|  |  | 
|  | if (ieee80211_is_data_qos(hdr->frame_control)) { | 
|  | u8 *qc = ieee80211_get_qos_ctl(hdr); | 
|  | tid = qc[0] & 0xf; | 
|  | } else | 
|  | return MAX_TID_COUNT; | 
|  |  | 
|  | if (unlikely(tid >= TID_MAX_LOAD_COUNT)) | 
|  | return MAX_TID_COUNT; | 
|  |  | 
|  | tl = &lq_data->load[tid]; | 
|  |  | 
|  | curr_time -= curr_time % TID_ROUND_VALUE; | 
|  |  | 
|  | /* Happens only for the first packet. Initialize the data */ | 
|  | if (!(tl->queue_count)) { | 
|  | tl->total = 1; | 
|  | tl->time_stamp = curr_time; | 
|  | tl->queue_count = 1; | 
|  | tl->head = 0; | 
|  | tl->packet_count[0] = 1; | 
|  | return MAX_TID_COUNT; | 
|  | } | 
|  |  | 
|  | time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); | 
|  | index = time_diff / TID_QUEUE_CELL_SPACING; | 
|  |  | 
|  | /* The history is too long: remove data that is older than */ | 
|  | /* TID_MAX_TIME_DIFF */ | 
|  | if (index >= TID_QUEUE_MAX_SIZE) | 
|  | rs_tl_rm_old_stats(tl, curr_time); | 
|  |  | 
|  | index = (tl->head + index) % TID_QUEUE_MAX_SIZE; | 
|  | tl->packet_count[index] = tl->packet_count[index] + 1; | 
|  | tl->total = tl->total + 1; | 
|  |  | 
|  | if ((index + 1) > tl->queue_count) | 
|  | tl->queue_count = index + 1; | 
|  |  | 
|  | return tid; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | static void rs_program_fix_rate(struct iwl_priv *priv, | 
|  | struct iwl_lq_sta *lq_sta) | 
|  | { | 
|  | struct iwl_station_priv *sta_priv = | 
|  | container_of(lq_sta, struct iwl_station_priv, lq_sta); | 
|  | struct iwl_rxon_context *ctx = sta_priv->common.ctx; | 
|  |  | 
|  | lq_sta->active_legacy_rate = 0x0FFF;	/* 1 - 54 MBits, includes CCK */ | 
|  | lq_sta->active_siso_rate   = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */ | 
|  | lq_sta->active_mimo2_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */ | 
|  | lq_sta->active_mimo3_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */ | 
|  |  | 
|  | lq_sta->dbg_fixed_rate = priv->dbg_fixed_rate; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "sta_id %d rate 0x%X\n", | 
|  | lq_sta->lq.sta_id, priv->dbg_fixed_rate); | 
|  |  | 
|  | if (priv->dbg_fixed_rate) { | 
|  | rs_fill_link_cmd(NULL, lq_sta, priv->dbg_fixed_rate); | 
|  | iwl_send_lq_cmd(lq_sta->drv, ctx, &lq_sta->lq, CMD_ASYNC, | 
|  | false); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | get the traffic load value for tid | 
|  | */ | 
|  | static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid) | 
|  | { | 
|  | u32 curr_time = jiffies_to_msecs(jiffies); | 
|  | u32 time_diff; | 
|  | s32 index; | 
|  | struct iwl_traffic_load *tl = NULL; | 
|  |  | 
|  | if (tid >= TID_MAX_LOAD_COUNT) | 
|  | return 0; | 
|  |  | 
|  | tl = &(lq_data->load[tid]); | 
|  |  | 
|  | curr_time -= curr_time % TID_ROUND_VALUE; | 
|  |  | 
|  | if (!(tl->queue_count)) | 
|  | return 0; | 
|  |  | 
|  | time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); | 
|  | index = time_diff / TID_QUEUE_CELL_SPACING; | 
|  |  | 
|  | /* The history is too long: remove data that is older than */ | 
|  | /* TID_MAX_TIME_DIFF */ | 
|  | if (index >= TID_QUEUE_MAX_SIZE) | 
|  | rs_tl_rm_old_stats(tl, curr_time); | 
|  |  | 
|  | return tl->total; | 
|  | } | 
|  |  | 
|  | static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, | 
|  | struct iwl_lq_sta *lq_data, u8 tid, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | int ret = -EAGAIN; | 
|  | u32 load; | 
|  |  | 
|  | /* | 
|  | * Don't create TX aggregation sessions when in high | 
|  | * BT traffic, as they would just be disrupted by BT. | 
|  | */ | 
|  | if (priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) { | 
|  | IWL_ERR(priv, "BT traffic (%d), no aggregation allowed\n", | 
|  | priv->bt_traffic_load); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | load = rs_tl_get_load(lq_data, tid); | 
|  |  | 
|  | if (load > IWL_AGG_LOAD_THRESHOLD) { | 
|  | IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n", | 
|  | sta->addr, tid); | 
|  | ret = ieee80211_start_tx_ba_session(sta, tid, 5000); | 
|  | if (ret == -EAGAIN) { | 
|  | /* | 
|  | * driver and mac80211 is out of sync | 
|  | * this might be cause by reloading firmware | 
|  | * stop the tx ba session here | 
|  | */ | 
|  | IWL_ERR(priv, "Fail start Tx agg on tid: %d\n", | 
|  | tid); | 
|  | ieee80211_stop_tx_ba_session(sta, tid); | 
|  | } | 
|  | } else { | 
|  | IWL_ERR(priv, "Aggregation not enabled for tid %d " | 
|  | "because load = %u\n", tid, load); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, | 
|  | struct iwl_lq_sta *lq_data, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | if (tid < TID_MAX_LOAD_COUNT) | 
|  | rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); | 
|  | else | 
|  | IWL_ERR(priv, "tid exceeds max load count: %d/%d\n", | 
|  | tid, TID_MAX_LOAD_COUNT); | 
|  | } | 
|  |  | 
|  | static inline int get_num_of_ant_from_rate(u32 rate_n_flags) | 
|  | { | 
|  | return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) + | 
|  | !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + | 
|  | !!(rate_n_flags & RATE_MCS_ANT_C_MSK); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Static function to get the expected throughput from an iwl_scale_tbl_info | 
|  | * that wraps a NULL pointer check | 
|  | */ | 
|  | static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index) | 
|  | { | 
|  | if (tbl->expected_tpt) | 
|  | return tbl->expected_tpt[rs_index]; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rs_collect_tx_data - Update the success/failure sliding window | 
|  | * | 
|  | * We keep a sliding window of the last 62 packets transmitted | 
|  | * at this rate.  window->data contains the bitmask of successful | 
|  | * packets. | 
|  | */ | 
|  | static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl, | 
|  | int scale_index, int attempts, int successes) | 
|  | { | 
|  | struct iwl_rate_scale_data *window = NULL; | 
|  | static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); | 
|  | s32 fail_count, tpt; | 
|  |  | 
|  | if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Select window for current tx bit rate */ | 
|  | window = &(tbl->win[scale_index]); | 
|  |  | 
|  | /* Get expected throughput */ | 
|  | tpt = get_expected_tpt(tbl, scale_index); | 
|  |  | 
|  | /* | 
|  | * Keep track of only the latest 62 tx frame attempts in this rate's | 
|  | * history window; anything older isn't really relevant any more. | 
|  | * If we have filled up the sliding window, drop the oldest attempt; | 
|  | * if the oldest attempt (highest bit in bitmap) shows "success", | 
|  | * subtract "1" from the success counter (this is the main reason | 
|  | * we keep these bitmaps!). | 
|  | */ | 
|  | while (attempts > 0) { | 
|  | if (window->counter >= IWL_RATE_MAX_WINDOW) { | 
|  |  | 
|  | /* remove earliest */ | 
|  | window->counter = IWL_RATE_MAX_WINDOW - 1; | 
|  |  | 
|  | if (window->data & mask) { | 
|  | window->data &= ~mask; | 
|  | window->success_counter--; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Increment frames-attempted counter */ | 
|  | window->counter++; | 
|  |  | 
|  | /* Shift bitmap by one frame to throw away oldest history */ | 
|  | window->data <<= 1; | 
|  |  | 
|  | /* Mark the most recent #successes attempts as successful */ | 
|  | if (successes > 0) { | 
|  | window->success_counter++; | 
|  | window->data |= 0x1; | 
|  | successes--; | 
|  | } | 
|  |  | 
|  | attempts--; | 
|  | } | 
|  |  | 
|  | /* Calculate current success ratio, avoid divide-by-0! */ | 
|  | if (window->counter > 0) | 
|  | window->success_ratio = 128 * (100 * window->success_counter) | 
|  | / window->counter; | 
|  | else | 
|  | window->success_ratio = IWL_INVALID_VALUE; | 
|  |  | 
|  | fail_count = window->counter - window->success_counter; | 
|  |  | 
|  | /* Calculate average throughput, if we have enough history. */ | 
|  | if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || | 
|  | (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) | 
|  | window->average_tpt = (window->success_ratio * tpt + 64) / 128; | 
|  | else | 
|  | window->average_tpt = IWL_INVALID_VALUE; | 
|  |  | 
|  | /* Tag this window as having been updated */ | 
|  | window->stamp = jiffies; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Fill uCode API rate_n_flags field, based on "search" or "active" table. | 
|  | */ | 
|  | /* FIXME:RS:remove this function and put the flags statically in the table */ | 
|  | static u32 rate_n_flags_from_tbl(struct iwl_priv *priv, | 
|  | struct iwl_scale_tbl_info *tbl, | 
|  | int index, u8 use_green) | 
|  | { | 
|  | u32 rate_n_flags = 0; | 
|  |  | 
|  | if (is_legacy(tbl->lq_type)) { | 
|  | rate_n_flags = iwl_rates[index].plcp; | 
|  | if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) | 
|  | rate_n_flags |= RATE_MCS_CCK_MSK; | 
|  |  | 
|  | } else if (is_Ht(tbl->lq_type)) { | 
|  | if (index > IWL_LAST_OFDM_RATE) { | 
|  | IWL_ERR(priv, "Invalid HT rate index %d\n", index); | 
|  | index = IWL_LAST_OFDM_RATE; | 
|  | } | 
|  | rate_n_flags = RATE_MCS_HT_MSK; | 
|  |  | 
|  | if (is_siso(tbl->lq_type)) | 
|  | rate_n_flags |=	iwl_rates[index].plcp_siso; | 
|  | else if (is_mimo2(tbl->lq_type)) | 
|  | rate_n_flags |=	iwl_rates[index].plcp_mimo2; | 
|  | else | 
|  | rate_n_flags |=	iwl_rates[index].plcp_mimo3; | 
|  | } else { | 
|  | IWL_ERR(priv, "Invalid tbl->lq_type %d\n", tbl->lq_type); | 
|  | } | 
|  |  | 
|  | rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) & | 
|  | RATE_MCS_ANT_ABC_MSK); | 
|  |  | 
|  | if (is_Ht(tbl->lq_type)) { | 
|  | if (tbl->is_ht40) { | 
|  | if (tbl->is_dup) | 
|  | rate_n_flags |= RATE_MCS_DUP_MSK; | 
|  | else | 
|  | rate_n_flags |= RATE_MCS_HT40_MSK; | 
|  | } | 
|  | if (tbl->is_SGI) | 
|  | rate_n_flags |= RATE_MCS_SGI_MSK; | 
|  |  | 
|  | if (use_green) { | 
|  | rate_n_flags |= RATE_MCS_GF_MSK; | 
|  | if (is_siso(tbl->lq_type) && tbl->is_SGI) { | 
|  | rate_n_flags &= ~RATE_MCS_SGI_MSK; | 
|  | IWL_ERR(priv, "GF was set with SGI:SISO\n"); | 
|  | } | 
|  | } | 
|  | } | 
|  | return rate_n_flags; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Interpret uCode API's rate_n_flags format, | 
|  | * fill "search" or "active" tx mode table. | 
|  | */ | 
|  | static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, | 
|  | enum ieee80211_band band, | 
|  | struct iwl_scale_tbl_info *tbl, | 
|  | int *rate_idx) | 
|  | { | 
|  | u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); | 
|  | u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags); | 
|  | u8 mcs; | 
|  |  | 
|  | memset(tbl, 0, sizeof(struct iwl_scale_tbl_info)); | 
|  | *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags); | 
|  |  | 
|  | if (*rate_idx  == IWL_RATE_INVALID) { | 
|  | *rate_idx = -1; | 
|  | return -EINVAL; | 
|  | } | 
|  | tbl->is_SGI = 0;	/* default legacy setup */ | 
|  | tbl->is_ht40 = 0; | 
|  | tbl->is_dup = 0; | 
|  | tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS); | 
|  | tbl->lq_type = LQ_NONE; | 
|  | tbl->max_search = IWL_MAX_SEARCH; | 
|  |  | 
|  | /* legacy rate format */ | 
|  | if (!(rate_n_flags & RATE_MCS_HT_MSK)) { | 
|  | if (num_of_ant == 1) { | 
|  | if (band == IEEE80211_BAND_5GHZ) | 
|  | tbl->lq_type = LQ_A; | 
|  | else | 
|  | tbl->lq_type = LQ_G; | 
|  | } | 
|  | /* HT rate format */ | 
|  | } else { | 
|  | if (rate_n_flags & RATE_MCS_SGI_MSK) | 
|  | tbl->is_SGI = 1; | 
|  |  | 
|  | if ((rate_n_flags & RATE_MCS_HT40_MSK) || | 
|  | (rate_n_flags & RATE_MCS_DUP_MSK)) | 
|  | tbl->is_ht40 = 1; | 
|  |  | 
|  | if (rate_n_flags & RATE_MCS_DUP_MSK) | 
|  | tbl->is_dup = 1; | 
|  |  | 
|  | mcs = rs_extract_rate(rate_n_flags); | 
|  |  | 
|  | /* SISO */ | 
|  | if (mcs <= IWL_RATE_SISO_60M_PLCP) { | 
|  | if (num_of_ant == 1) | 
|  | tbl->lq_type = LQ_SISO; /*else NONE*/ | 
|  | /* MIMO2 */ | 
|  | } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) { | 
|  | if (num_of_ant == 2) | 
|  | tbl->lq_type = LQ_MIMO2; | 
|  | /* MIMO3 */ | 
|  | } else { | 
|  | if (num_of_ant == 3) { | 
|  | tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; | 
|  | tbl->lq_type = LQ_MIMO3; | 
|  | } | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* switch to another antenna/antennas and return 1 */ | 
|  | /* if no other valid antenna found, return 0 */ | 
|  | static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, | 
|  | struct iwl_scale_tbl_info *tbl) | 
|  | { | 
|  | u8 new_ant_type; | 
|  |  | 
|  | if (!tbl->ant_type || tbl->ant_type > ANT_ABC) | 
|  | return 0; | 
|  |  | 
|  | if (!rs_is_valid_ant(valid_ant, tbl->ant_type)) | 
|  | return 0; | 
|  |  | 
|  | new_ant_type = ant_toggle_lookup[tbl->ant_type]; | 
|  |  | 
|  | while ((new_ant_type != tbl->ant_type) && | 
|  | !rs_is_valid_ant(valid_ant, new_ant_type)) | 
|  | new_ant_type = ant_toggle_lookup[new_ant_type]; | 
|  |  | 
|  | if (new_ant_type == tbl->ant_type) | 
|  | return 0; | 
|  |  | 
|  | tbl->ant_type = new_ant_type; | 
|  | *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK; | 
|  | *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Green-field mode is valid if the station supports it and | 
|  | * there are no non-GF stations present in the BSS. | 
|  | */ | 
|  | static bool rs_use_green(struct ieee80211_sta *sta) | 
|  | { | 
|  | struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; | 
|  | struct iwl_rxon_context *ctx = sta_priv->common.ctx; | 
|  |  | 
|  | return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) && | 
|  | !(ctx->ht.non_gf_sta_present); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rs_get_supported_rates - get the available rates | 
|  | * | 
|  | * if management frame or broadcast frame only return | 
|  | * basic available rates. | 
|  | * | 
|  | */ | 
|  | static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_hdr *hdr, | 
|  | enum iwl_table_type rate_type) | 
|  | { | 
|  | if (is_legacy(rate_type)) { | 
|  | return lq_sta->active_legacy_rate; | 
|  | } else { | 
|  | if (is_siso(rate_type)) | 
|  | return lq_sta->active_siso_rate; | 
|  | else if (is_mimo2(rate_type)) | 
|  | return lq_sta->active_mimo2_rate; | 
|  | else | 
|  | return lq_sta->active_mimo3_rate; | 
|  | } | 
|  | } | 
|  |  | 
|  | static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask, | 
|  | int rate_type) | 
|  | { | 
|  | u8 high = IWL_RATE_INVALID; | 
|  | u8 low = IWL_RATE_INVALID; | 
|  |  | 
|  | /* 802.11A or ht walks to the next literal adjacent rate in | 
|  | * the rate table */ | 
|  | if (is_a_band(rate_type) || !is_legacy(rate_type)) { | 
|  | int i; | 
|  | u32 mask; | 
|  |  | 
|  | /* Find the previous rate that is in the rate mask */ | 
|  | i = index - 1; | 
|  | for (mask = (1 << i); i >= 0; i--, mask >>= 1) { | 
|  | if (rate_mask & mask) { | 
|  | low = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Find the next rate that is in the rate mask */ | 
|  | i = index + 1; | 
|  | for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { | 
|  | if (rate_mask & mask) { | 
|  | high = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return (high << 8) | low; | 
|  | } | 
|  |  | 
|  | low = index; | 
|  | while (low != IWL_RATE_INVALID) { | 
|  | low = iwl_rates[low].prev_rs; | 
|  | if (low == IWL_RATE_INVALID) | 
|  | break; | 
|  | if (rate_mask & (1 << low)) | 
|  | break; | 
|  | IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low); | 
|  | } | 
|  |  | 
|  | high = index; | 
|  | while (high != IWL_RATE_INVALID) { | 
|  | high = iwl_rates[high].next_rs; | 
|  | if (high == IWL_RATE_INVALID) | 
|  | break; | 
|  | if (rate_mask & (1 << high)) | 
|  | break; | 
|  | IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high); | 
|  | } | 
|  |  | 
|  | return (high << 8) | low; | 
|  | } | 
|  |  | 
|  | static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta, | 
|  | struct iwl_scale_tbl_info *tbl, | 
|  | u8 scale_index, u8 ht_possible) | 
|  | { | 
|  | s32 low; | 
|  | u16 rate_mask; | 
|  | u16 high_low; | 
|  | u8 switch_to_legacy = 0; | 
|  | u8 is_green = lq_sta->is_green; | 
|  | struct iwl_priv *priv = lq_sta->drv; | 
|  |  | 
|  | /* check if we need to switch from HT to legacy rates. | 
|  | * assumption is that mandatory rates (1Mbps or 6Mbps) | 
|  | * are always supported (spec demand) */ | 
|  | if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) { | 
|  | switch_to_legacy = 1; | 
|  | scale_index = rs_ht_to_legacy[scale_index]; | 
|  | if (lq_sta->band == IEEE80211_BAND_5GHZ) | 
|  | tbl->lq_type = LQ_A; | 
|  | else | 
|  | tbl->lq_type = LQ_G; | 
|  |  | 
|  | if (num_of_ant(tbl->ant_type) > 1) | 
|  | tbl->ant_type = | 
|  | first_antenna(priv->hw_params.valid_tx_ant); | 
|  |  | 
|  | tbl->is_ht40 = 0; | 
|  | tbl->is_SGI = 0; | 
|  | tbl->max_search = IWL_MAX_SEARCH; | 
|  | } | 
|  |  | 
|  | rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type); | 
|  |  | 
|  | /* Mask with station rate restriction */ | 
|  | if (is_legacy(tbl->lq_type)) { | 
|  | /* supp_rates has no CCK bits in A mode */ | 
|  | if (lq_sta->band == IEEE80211_BAND_5GHZ) | 
|  | rate_mask  = (u16)(rate_mask & | 
|  | (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); | 
|  | else | 
|  | rate_mask = (u16)(rate_mask & lq_sta->supp_rates); | 
|  | } | 
|  |  | 
|  | /* If we switched from HT to legacy, check current rate */ | 
|  | if (switch_to_legacy && (rate_mask & (1 << scale_index))) { | 
|  | low = scale_index; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask, | 
|  | tbl->lq_type); | 
|  | low = high_low & 0xff; | 
|  |  | 
|  | if (low == IWL_RATE_INVALID) | 
|  | low = scale_index; | 
|  |  | 
|  | out: | 
|  | return rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Simple function to compare two rate scale table types | 
|  | */ | 
|  | static bool table_type_matches(struct iwl_scale_tbl_info *a, | 
|  | struct iwl_scale_tbl_info *b) | 
|  | { | 
|  | return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) && | 
|  | (a->is_SGI == b->is_SGI); | 
|  | } | 
|  |  | 
|  | static void rs_bt_update_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx, | 
|  | struct iwl_lq_sta *lq_sta) | 
|  | { | 
|  | struct iwl_scale_tbl_info *tbl; | 
|  | bool full_concurrent = priv->bt_full_concurrent; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (priv->bt_ant_couple_ok) { | 
|  | /* | 
|  | * Is there a need to switch between | 
|  | * full concurrency and 3-wire? | 
|  | */ | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | if (priv->bt_ci_compliance && priv->bt_ant_couple_ok) | 
|  | full_concurrent = true; | 
|  | else | 
|  | full_concurrent = false; | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | } | 
|  | if ((priv->bt_traffic_load != priv->last_bt_traffic_load) || | 
|  | (priv->bt_full_concurrent != full_concurrent)) { | 
|  | priv->bt_full_concurrent = full_concurrent; | 
|  |  | 
|  | /* Update uCode's rate table. */ | 
|  | tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); | 
|  | iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); | 
|  |  | 
|  | queue_work(priv->workqueue, &priv->bt_full_concurrency); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * mac80211 sends us Tx status | 
|  | */ | 
|  | static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, | 
|  | struct ieee80211_sta *sta, void *priv_sta, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | int legacy_success; | 
|  | int retries; | 
|  | int rs_index, mac_index, i; | 
|  | struct iwl_lq_sta *lq_sta = priv_sta; | 
|  | struct iwl_link_quality_cmd *table; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
|  | struct iwl_priv *priv = (struct iwl_priv *)priv_r; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | enum mac80211_rate_control_flags mac_flags; | 
|  | u32 tx_rate; | 
|  | struct iwl_scale_tbl_info tbl_type; | 
|  | struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; | 
|  | struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; | 
|  | struct iwl_rxon_context *ctx = sta_priv->common.ctx; | 
|  |  | 
|  | IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n"); | 
|  |  | 
|  | /* Treat uninitialized rate scaling data same as non-existing. */ | 
|  | if (!lq_sta) { | 
|  | IWL_DEBUG_RATE(priv, "Station rate scaling not created yet.\n"); | 
|  | return; | 
|  | } else if (!lq_sta->drv) { | 
|  | IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!ieee80211_is_data(hdr->frame_control) || | 
|  | info->flags & IEEE80211_TX_CTL_NO_ACK) | 
|  | return; | 
|  |  | 
|  | /* This packet was aggregated but doesn't carry status info */ | 
|  | if ((info->flags & IEEE80211_TX_CTL_AMPDU) && | 
|  | !(info->flags & IEEE80211_TX_STAT_AMPDU)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Ignore this Tx frame response if its initial rate doesn't match | 
|  | * that of latest Link Quality command.  There may be stragglers | 
|  | * from a previous Link Quality command, but we're no longer interested | 
|  | * in those; they're either from the "active" mode while we're trying | 
|  | * to check "search" mode, or a prior "search" mode after we've moved | 
|  | * to a new "search" mode (which might become the new "active" mode). | 
|  | */ | 
|  | table = &lq_sta->lq; | 
|  | tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); | 
|  | rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); | 
|  | if (priv->band == IEEE80211_BAND_5GHZ) | 
|  | rs_index -= IWL_FIRST_OFDM_RATE; | 
|  | mac_flags = info->status.rates[0].flags; | 
|  | mac_index = info->status.rates[0].idx; | 
|  | /* For HT packets, map MCS to PLCP */ | 
|  | if (mac_flags & IEEE80211_TX_RC_MCS) { | 
|  | mac_index &= RATE_MCS_CODE_MSK;	/* Remove # of streams */ | 
|  | if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE)) | 
|  | mac_index++; | 
|  | /* | 
|  | * mac80211 HT index is always zero-indexed; we need to move | 
|  | * HT OFDM rates after CCK rates in 2.4 GHz band | 
|  | */ | 
|  | if (priv->band == IEEE80211_BAND_2GHZ) | 
|  | mac_index += IWL_FIRST_OFDM_RATE; | 
|  | } | 
|  | /* Here we actually compare this rate to the latest LQ command */ | 
|  | if ((mac_index < 0) || | 
|  | (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) || | 
|  | (tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) || | 
|  | (tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA)) || | 
|  | (tbl_type.ant_type != info->antenna_sel_tx) || | 
|  | (!!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)) || | 
|  | (!!(tx_rate & RATE_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) || | 
|  | (rs_index != mac_index)) { | 
|  | IWL_DEBUG_RATE(priv, "initial rate %d does not match %d (0x%x)\n", mac_index, rs_index, tx_rate); | 
|  | /* | 
|  | * Since rates mis-match, the last LQ command may have failed. | 
|  | * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with | 
|  | * ... driver. | 
|  | */ | 
|  | lq_sta->missed_rate_counter++; | 
|  | if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) { | 
|  | lq_sta->missed_rate_counter = 0; | 
|  | iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); | 
|  | } | 
|  | /* Regardless, ignore this status info for outdated rate */ | 
|  | return; | 
|  | } else | 
|  | /* Rate did match, so reset the missed_rate_counter */ | 
|  | lq_sta->missed_rate_counter = 0; | 
|  |  | 
|  | /* Figure out if rate scale algorithm is in active or search table */ | 
|  | if (table_type_matches(&tbl_type, | 
|  | &(lq_sta->lq_info[lq_sta->active_tbl]))) { | 
|  | curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); | 
|  | } else if (table_type_matches(&tbl_type, | 
|  | &lq_sta->lq_info[1 - lq_sta->active_tbl])) { | 
|  | curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); | 
|  | other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | } else { | 
|  | IWL_DEBUG_RATE(priv, "Neither active nor search matches tx rate\n"); | 
|  | tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | IWL_DEBUG_RATE(priv, "active- lq:%x, ant:%x, SGI:%d\n", | 
|  | tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI); | 
|  | tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); | 
|  | IWL_DEBUG_RATE(priv, "search- lq:%x, ant:%x, SGI:%d\n", | 
|  | tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI); | 
|  | IWL_DEBUG_RATE(priv, "actual- lq:%x, ant:%x, SGI:%d\n", | 
|  | tbl_type.lq_type, tbl_type.ant_type, tbl_type.is_SGI); | 
|  | /* | 
|  | * no matching table found, let's by-pass the data collection | 
|  | * and continue to perform rate scale to find the rate table | 
|  | */ | 
|  | rs_stay_in_table(lq_sta, true); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Updating the frame history depends on whether packets were | 
|  | * aggregated. | 
|  | * | 
|  | * For aggregation, all packets were transmitted at the same rate, the | 
|  | * first index into rate scale table. | 
|  | */ | 
|  | if (info->flags & IEEE80211_TX_STAT_AMPDU) { | 
|  | tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); | 
|  | rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, | 
|  | &rs_index); | 
|  | rs_collect_tx_data(curr_tbl, rs_index, | 
|  | info->status.ampdu_len, | 
|  | info->status.ampdu_ack_len); | 
|  |  | 
|  | /* Update success/fail counts if not searching for new mode */ | 
|  | if (lq_sta->stay_in_tbl) { | 
|  | lq_sta->total_success += info->status.ampdu_ack_len; | 
|  | lq_sta->total_failed += (info->status.ampdu_len - | 
|  | info->status.ampdu_ack_len); | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * For legacy, update frame history with for each Tx retry. | 
|  | */ | 
|  | retries = info->status.rates[0].count - 1; | 
|  | /* HW doesn't send more than 15 retries */ | 
|  | retries = min(retries, 15); | 
|  |  | 
|  | /* The last transmission may have been successful */ | 
|  | legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); | 
|  | /* Collect data for each rate used during failed TX attempts */ | 
|  | for (i = 0; i <= retries; ++i) { | 
|  | tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags); | 
|  | rs_get_tbl_info_from_mcs(tx_rate, priv->band, | 
|  | &tbl_type, &rs_index); | 
|  | /* | 
|  | * Only collect stats if retried rate is in the same RS | 
|  | * table as active/search. | 
|  | */ | 
|  | if (table_type_matches(&tbl_type, curr_tbl)) | 
|  | tmp_tbl = curr_tbl; | 
|  | else if (table_type_matches(&tbl_type, other_tbl)) | 
|  | tmp_tbl = other_tbl; | 
|  | else | 
|  | continue; | 
|  | rs_collect_tx_data(tmp_tbl, rs_index, 1, | 
|  | i < retries ? 0 : legacy_success); | 
|  | } | 
|  |  | 
|  | /* Update success/fail counts if not searching for new mode */ | 
|  | if (lq_sta->stay_in_tbl) { | 
|  | lq_sta->total_success += legacy_success; | 
|  | lq_sta->total_failed += retries + (1 - legacy_success); | 
|  | } | 
|  | } | 
|  | /* The last TX rate is cached in lq_sta; it's set in if/else above */ | 
|  | lq_sta->last_rate_n_flags = tx_rate; | 
|  | done: | 
|  | /* See if there's a better rate or modulation mode to try. */ | 
|  | if (sta && sta->supp_rates[sband->band]) | 
|  | rs_rate_scale_perform(priv, skb, sta, lq_sta); | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | if (priv->dbg_fixed_rate != lq_sta->dbg_fixed_rate) | 
|  | rs_program_fix_rate(priv, lq_sta); | 
|  | #endif | 
|  | if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist) | 
|  | rs_bt_update_lq(priv, ctx, lq_sta); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Begin a period of staying with a selected modulation mode. | 
|  | * Set "stay_in_tbl" flag to prevent any mode switches. | 
|  | * Set frame tx success limits according to legacy vs. high-throughput, | 
|  | * and reset overall (spanning all rates) tx success history statistics. | 
|  | * These control how long we stay using same modulation mode before | 
|  | * searching for a new mode. | 
|  | */ | 
|  | static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy, | 
|  | struct iwl_lq_sta *lq_sta) | 
|  | { | 
|  | IWL_DEBUG_RATE(priv, "we are staying in the same table\n"); | 
|  | lq_sta->stay_in_tbl = 1;	/* only place this gets set */ | 
|  | if (is_legacy) { | 
|  | lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT; | 
|  | lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT; | 
|  | lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT; | 
|  | } else { | 
|  | lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT; | 
|  | lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT; | 
|  | lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT; | 
|  | } | 
|  | lq_sta->table_count = 0; | 
|  | lq_sta->total_failed = 0; | 
|  | lq_sta->total_success = 0; | 
|  | lq_sta->flush_timer = jiffies; | 
|  | lq_sta->action_counter = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Find correct throughput table for given mode of modulation | 
|  | */ | 
|  | static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, | 
|  | struct iwl_scale_tbl_info *tbl) | 
|  | { | 
|  | /* Used to choose among HT tables */ | 
|  | s32 (*ht_tbl_pointer)[IWL_RATE_COUNT]; | 
|  |  | 
|  | /* Check for invalid LQ type */ | 
|  | if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) { | 
|  | tbl->expected_tpt = expected_tpt_legacy; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Legacy rates have only one table */ | 
|  | if (is_legacy(tbl->lq_type)) { | 
|  | tbl->expected_tpt = expected_tpt_legacy; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Choose among many HT tables depending on number of streams | 
|  | * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation | 
|  | * status */ | 
|  | if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) | 
|  | ht_tbl_pointer = expected_tpt_siso20MHz; | 
|  | else if (is_siso(tbl->lq_type)) | 
|  | ht_tbl_pointer = expected_tpt_siso40MHz; | 
|  | else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) | 
|  | ht_tbl_pointer = expected_tpt_mimo2_20MHz; | 
|  | else if (is_mimo2(tbl->lq_type)) | 
|  | ht_tbl_pointer = expected_tpt_mimo2_40MHz; | 
|  | else if (is_mimo3(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) | 
|  | ht_tbl_pointer = expected_tpt_mimo3_20MHz; | 
|  | else /* if (is_mimo3(tbl->lq_type)) <-- must be true */ | 
|  | ht_tbl_pointer = expected_tpt_mimo3_40MHz; | 
|  |  | 
|  | if (!tbl->is_SGI && !lq_sta->is_agg)		/* Normal */ | 
|  | tbl->expected_tpt = ht_tbl_pointer[0]; | 
|  | else if (tbl->is_SGI && !lq_sta->is_agg)	/* SGI */ | 
|  | tbl->expected_tpt = ht_tbl_pointer[1]; | 
|  | else if (!tbl->is_SGI && lq_sta->is_agg)	/* AGG */ | 
|  | tbl->expected_tpt = ht_tbl_pointer[2]; | 
|  | else						/* AGG+SGI */ | 
|  | tbl->expected_tpt = ht_tbl_pointer[3]; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Find starting rate for new "search" high-throughput mode of modulation. | 
|  | * Goal is to find lowest expected rate (under perfect conditions) that is | 
|  | * above the current measured throughput of "active" mode, to give new mode | 
|  | * a fair chance to prove itself without too many challenges. | 
|  | * | 
|  | * This gets called when transitioning to more aggressive modulation | 
|  | * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive | 
|  | * (i.e. MIMO to SISO).  When moving to MIMO, bit rate will typically need | 
|  | * to decrease to match "active" throughput.  When moving from MIMO to SISO, | 
|  | * bit rate will typically need to increase, but not if performance was bad. | 
|  | */ | 
|  | static s32 rs_get_best_rate(struct iwl_priv *priv, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct iwl_scale_tbl_info *tbl,	/* "search" */ | 
|  | u16 rate_mask, s8 index) | 
|  | { | 
|  | /* "active" values */ | 
|  | struct iwl_scale_tbl_info *active_tbl = | 
|  | &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | s32 active_sr = active_tbl->win[index].success_ratio; | 
|  | s32 active_tpt = active_tbl->expected_tpt[index]; | 
|  |  | 
|  | /* expected "search" throughput */ | 
|  | s32 *tpt_tbl = tbl->expected_tpt; | 
|  |  | 
|  | s32 new_rate, high, low, start_hi; | 
|  | u16 high_low; | 
|  | s8 rate = index; | 
|  |  | 
|  | new_rate = high = low = start_hi = IWL_RATE_INVALID; | 
|  |  | 
|  | for (; ;) { | 
|  | high_low = rs_get_adjacent_rate(priv, rate, rate_mask, | 
|  | tbl->lq_type); | 
|  |  | 
|  | low = high_low & 0xff; | 
|  | high = (high_low >> 8) & 0xff; | 
|  |  | 
|  | /* | 
|  | * Lower the "search" bit rate, to give new "search" mode | 
|  | * approximately the same throughput as "active" if: | 
|  | * | 
|  | * 1) "Active" mode has been working modestly well (but not | 
|  | *    great), and expected "search" throughput (under perfect | 
|  | *    conditions) at candidate rate is above the actual | 
|  | *    measured "active" throughput (but less than expected | 
|  | *    "active" throughput under perfect conditions). | 
|  | * OR | 
|  | * 2) "Active" mode has been working perfectly or very well | 
|  | *    and expected "search" throughput (under perfect | 
|  | *    conditions) at candidate rate is above expected | 
|  | *    "active" throughput (under perfect conditions). | 
|  | */ | 
|  | if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) && | 
|  | ((active_sr > IWL_RATE_DECREASE_TH) && | 
|  | (active_sr <= IWL_RATE_HIGH_TH) && | 
|  | (tpt_tbl[rate] <= active_tpt))) || | 
|  | ((active_sr >= IWL_RATE_SCALE_SWITCH) && | 
|  | (tpt_tbl[rate] > active_tpt))) { | 
|  |  | 
|  | /* (2nd or later pass) | 
|  | * If we've already tried to raise the rate, and are | 
|  | * now trying to lower it, use the higher rate. */ | 
|  | if (start_hi != IWL_RATE_INVALID) { | 
|  | new_rate = start_hi; | 
|  | break; | 
|  | } | 
|  |  | 
|  | new_rate = rate; | 
|  |  | 
|  | /* Loop again with lower rate */ | 
|  | if (low != IWL_RATE_INVALID) | 
|  | rate = low; | 
|  |  | 
|  | /* Lower rate not available, use the original */ | 
|  | else | 
|  | break; | 
|  |  | 
|  | /* Else try to raise the "search" rate to match "active" */ | 
|  | } else { | 
|  | /* (2nd or later pass) | 
|  | * If we've already tried to lower the rate, and are | 
|  | * now trying to raise it, use the lower rate. */ | 
|  | if (new_rate != IWL_RATE_INVALID) | 
|  | break; | 
|  |  | 
|  | /* Loop again with higher rate */ | 
|  | else if (high != IWL_RATE_INVALID) { | 
|  | start_hi = high; | 
|  | rate = high; | 
|  |  | 
|  | /* Higher rate not available, use the original */ | 
|  | } else { | 
|  | new_rate = rate; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return new_rate; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set up search table for MIMO2 | 
|  | */ | 
|  | static int rs_switch_to_mimo2(struct iwl_priv *priv, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_conf *conf, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_scale_tbl_info *tbl, int index) | 
|  | { | 
|  | u16 rate_mask; | 
|  | s32 rate; | 
|  | s8 is_green = lq_sta->is_green; | 
|  | struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; | 
|  | struct iwl_rxon_context *ctx = sta_priv->common.ctx; | 
|  |  | 
|  | if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) | 
|  | return -1; | 
|  |  | 
|  | if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) | 
|  | == WLAN_HT_CAP_SM_PS_STATIC) | 
|  | return -1; | 
|  |  | 
|  | /* Need both Tx chains/antennas to support MIMO */ | 
|  | if (priv->hw_params.tx_chains_num < 2) | 
|  | return -1; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO2\n"); | 
|  |  | 
|  | tbl->lq_type = LQ_MIMO2; | 
|  | tbl->is_dup = lq_sta->is_dup; | 
|  | tbl->action = 0; | 
|  | tbl->max_search = IWL_MAX_SEARCH; | 
|  | rate_mask = lq_sta->active_mimo2_rate; | 
|  |  | 
|  | if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) | 
|  | tbl->is_ht40 = 1; | 
|  | else | 
|  | tbl->is_ht40 = 0; | 
|  |  | 
|  | rs_set_expected_tpt_table(lq_sta, tbl); | 
|  |  | 
|  | rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask); | 
|  | if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { | 
|  | IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n", | 
|  | rate, rate_mask); | 
|  | return -1; | 
|  | } | 
|  | tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n", | 
|  | tbl->current_rate, is_green); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set up search table for MIMO3 | 
|  | */ | 
|  | static int rs_switch_to_mimo3(struct iwl_priv *priv, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_conf *conf, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_scale_tbl_info *tbl, int index) | 
|  | { | 
|  | u16 rate_mask; | 
|  | s32 rate; | 
|  | s8 is_green = lq_sta->is_green; | 
|  | struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; | 
|  | struct iwl_rxon_context *ctx = sta_priv->common.ctx; | 
|  |  | 
|  | if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) | 
|  | return -1; | 
|  |  | 
|  | if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) | 
|  | == WLAN_HT_CAP_SM_PS_STATIC) | 
|  | return -1; | 
|  |  | 
|  | /* Need both Tx chains/antennas to support MIMO */ | 
|  | if (priv->hw_params.tx_chains_num < 3) | 
|  | return -1; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO3\n"); | 
|  |  | 
|  | tbl->lq_type = LQ_MIMO3; | 
|  | tbl->is_dup = lq_sta->is_dup; | 
|  | tbl->action = 0; | 
|  | tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; | 
|  | rate_mask = lq_sta->active_mimo3_rate; | 
|  |  | 
|  | if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) | 
|  | tbl->is_ht40 = 1; | 
|  | else | 
|  | tbl->is_ht40 = 0; | 
|  |  | 
|  | rs_set_expected_tpt_table(lq_sta, tbl); | 
|  |  | 
|  | rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: MIMO3 best rate %d mask %X\n", | 
|  | rate, rate_mask); | 
|  | if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { | 
|  | IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n", | 
|  | rate, rate_mask); | 
|  | return -1; | 
|  | } | 
|  | tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n", | 
|  | tbl->current_rate, is_green); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set up search table for SISO | 
|  | */ | 
|  | static int rs_switch_to_siso(struct iwl_priv *priv, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_conf *conf, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_scale_tbl_info *tbl, int index) | 
|  | { | 
|  | u16 rate_mask; | 
|  | u8 is_green = lq_sta->is_green; | 
|  | s32 rate; | 
|  | struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; | 
|  | struct iwl_rxon_context *ctx = sta_priv->common.ctx; | 
|  |  | 
|  | if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) | 
|  | return -1; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: try to switch to SISO\n"); | 
|  |  | 
|  | tbl->is_dup = lq_sta->is_dup; | 
|  | tbl->lq_type = LQ_SISO; | 
|  | tbl->action = 0; | 
|  | tbl->max_search = IWL_MAX_SEARCH; | 
|  | rate_mask = lq_sta->active_siso_rate; | 
|  |  | 
|  | if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) | 
|  | tbl->is_ht40 = 1; | 
|  | else | 
|  | tbl->is_ht40 = 0; | 
|  |  | 
|  | if (is_green) | 
|  | tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/ | 
|  |  | 
|  | rs_set_expected_tpt_table(lq_sta, tbl); | 
|  | rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: get best rate %d mask %X\n", rate, rate_mask); | 
|  | if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { | 
|  | IWL_DEBUG_RATE(priv, "can not switch with index %d rate mask %x\n", | 
|  | rate, rate_mask); | 
|  | return -1; | 
|  | } | 
|  | tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green); | 
|  | IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n", | 
|  | tbl->current_rate, is_green); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Try to switch to new modulation mode from legacy | 
|  | */ | 
|  | static int rs_move_legacy_other(struct iwl_priv *priv, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_conf *conf, | 
|  | struct ieee80211_sta *sta, | 
|  | int index) | 
|  | { | 
|  | struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | struct iwl_scale_tbl_info *search_tbl = | 
|  | &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); | 
|  | struct iwl_rate_scale_data *window = &(tbl->win[index]); | 
|  | u32 sz = (sizeof(struct iwl_scale_tbl_info) - | 
|  | (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); | 
|  | u8 start_action; | 
|  | u8 valid_tx_ant = priv->hw_params.valid_tx_ant; | 
|  | u8 tx_chains_num = priv->hw_params.tx_chains_num; | 
|  | int ret = 0; | 
|  | u8 update_search_tbl_counter = 0; | 
|  |  | 
|  | switch (priv->bt_traffic_load) { | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_NONE: | 
|  | /* nothing */ | 
|  | break; | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_LOW: | 
|  | /* avoid antenna B unless MIMO */ | 
|  | valid_tx_ant = first_antenna(priv->hw_params.valid_tx_ant); | 
|  | if (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2) | 
|  | tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; | 
|  | break; | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: | 
|  | /* avoid antenna B and MIMO */ | 
|  | valid_tx_ant = first_antenna(priv->hw_params.valid_tx_ant); | 
|  | if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2 && | 
|  | tbl->action != IWL_LEGACY_SWITCH_SISO) | 
|  | tbl->action = IWL_LEGACY_SWITCH_SISO; | 
|  | break; | 
|  | default: | 
|  | IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!iwl_ht_enabled(priv)) | 
|  | /* stay in Legacy */ | 
|  | tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; | 
|  | else if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE && | 
|  | tbl->action > IWL_LEGACY_SWITCH_SISO) | 
|  | tbl->action = IWL_LEGACY_SWITCH_SISO; | 
|  |  | 
|  | /* configure as 1x1 if bt full concurrency */ | 
|  | if (priv->bt_full_concurrent) { | 
|  | if (!iwl_ht_enabled(priv)) | 
|  | tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; | 
|  | else if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2) | 
|  | tbl->action = IWL_LEGACY_SWITCH_SISO; | 
|  | valid_tx_ant = first_antenna(priv->hw_params.valid_tx_ant); | 
|  | } | 
|  |  | 
|  | start_action = tbl->action; | 
|  | for (; ;) { | 
|  | lq_sta->action_counter++; | 
|  | switch (tbl->action) { | 
|  | case IWL_LEGACY_SWITCH_ANTENNA1: | 
|  | case IWL_LEGACY_SWITCH_ANTENNA2: | 
|  | IWL_DEBUG_RATE(priv, "LQ: Legacy toggle Antenna\n"); | 
|  |  | 
|  | if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 && | 
|  | tx_chains_num <= 1) || | 
|  | (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 && | 
|  | tx_chains_num <= 2)) | 
|  | break; | 
|  |  | 
|  | /* Don't change antenna if success has been great */ | 
|  | if (window->success_ratio >= IWL_RS_GOOD_RATIO && | 
|  | !priv->bt_full_concurrent && | 
|  | priv->bt_traffic_load == | 
|  | IWL_BT_COEX_TRAFFIC_LOAD_NONE) | 
|  | break; | 
|  |  | 
|  | /* Set up search table to try other antenna */ | 
|  | memcpy(search_tbl, tbl, sz); | 
|  |  | 
|  | if (rs_toggle_antenna(valid_tx_ant, | 
|  | &search_tbl->current_rate, search_tbl)) { | 
|  | update_search_tbl_counter = 1; | 
|  | rs_set_expected_tpt_table(lq_sta, search_tbl); | 
|  | goto out; | 
|  | } | 
|  | break; | 
|  | case IWL_LEGACY_SWITCH_SISO: | 
|  | IWL_DEBUG_RATE(priv, "LQ: Legacy switch to SISO\n"); | 
|  |  | 
|  | /* Set up search table to try SISO */ | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | search_tbl->is_SGI = 0; | 
|  | ret = rs_switch_to_siso(priv, lq_sta, conf, sta, | 
|  | search_tbl, index); | 
|  | if (!ret) { | 
|  | lq_sta->action_counter = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | break; | 
|  | case IWL_LEGACY_SWITCH_MIMO2_AB: | 
|  | case IWL_LEGACY_SWITCH_MIMO2_AC: | 
|  | case IWL_LEGACY_SWITCH_MIMO2_BC: | 
|  | IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO2\n"); | 
|  |  | 
|  | /* Set up search table to try MIMO */ | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | search_tbl->is_SGI = 0; | 
|  |  | 
|  | if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AB) | 
|  | search_tbl->ant_type = ANT_AB; | 
|  | else if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AC) | 
|  | search_tbl->ant_type = ANT_AC; | 
|  | else | 
|  | search_tbl->ant_type = ANT_BC; | 
|  |  | 
|  | if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) | 
|  | break; | 
|  |  | 
|  | ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, | 
|  | search_tbl, index); | 
|  | if (!ret) { | 
|  | lq_sta->action_counter = 0; | 
|  | goto out; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IWL_LEGACY_SWITCH_MIMO3_ABC: | 
|  | IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO3\n"); | 
|  |  | 
|  | /* Set up search table to try MIMO3 */ | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | search_tbl->is_SGI = 0; | 
|  |  | 
|  | search_tbl->ant_type = ANT_ABC; | 
|  |  | 
|  | if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) | 
|  | break; | 
|  |  | 
|  | ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta, | 
|  | search_tbl, index); | 
|  | if (!ret) { | 
|  | lq_sta->action_counter = 0; | 
|  | goto out; | 
|  | } | 
|  | break; | 
|  | } | 
|  | tbl->action++; | 
|  | if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) | 
|  | tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; | 
|  |  | 
|  | if (tbl->action == start_action) | 
|  | break; | 
|  |  | 
|  | } | 
|  | search_tbl->lq_type = LQ_NONE; | 
|  | return 0; | 
|  |  | 
|  | out: | 
|  | lq_sta->search_better_tbl = 1; | 
|  | tbl->action++; | 
|  | if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) | 
|  | tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; | 
|  | if (update_search_tbl_counter) | 
|  | search_tbl->action = tbl->action; | 
|  | return 0; | 
|  |  | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Try to switch to new modulation mode from SISO | 
|  | */ | 
|  | static int rs_move_siso_to_other(struct iwl_priv *priv, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_conf *conf, | 
|  | struct ieee80211_sta *sta, int index) | 
|  | { | 
|  | u8 is_green = lq_sta->is_green; | 
|  | struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | struct iwl_scale_tbl_info *search_tbl = | 
|  | &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); | 
|  | struct iwl_rate_scale_data *window = &(tbl->win[index]); | 
|  | struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; | 
|  | u32 sz = (sizeof(struct iwl_scale_tbl_info) - | 
|  | (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); | 
|  | u8 start_action; | 
|  | u8 valid_tx_ant = priv->hw_params.valid_tx_ant; | 
|  | u8 tx_chains_num = priv->hw_params.tx_chains_num; | 
|  | u8 update_search_tbl_counter = 0; | 
|  | int ret; | 
|  |  | 
|  | switch (priv->bt_traffic_load) { | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_NONE: | 
|  | /* nothing */ | 
|  | break; | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_LOW: | 
|  | /* avoid antenna B unless MIMO */ | 
|  | valid_tx_ant = first_antenna(priv->hw_params.valid_tx_ant); | 
|  | if (tbl->action == IWL_SISO_SWITCH_ANTENNA2) | 
|  | tbl->action = IWL_SISO_SWITCH_ANTENNA1; | 
|  | break; | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: | 
|  | /* avoid antenna B and MIMO */ | 
|  | valid_tx_ant = first_antenna(priv->hw_params.valid_tx_ant); | 
|  | if (tbl->action != IWL_SISO_SWITCH_ANTENNA1) | 
|  | tbl->action = IWL_SISO_SWITCH_ANTENNA1; | 
|  | break; | 
|  | default: | 
|  | IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE && | 
|  | tbl->action > IWL_SISO_SWITCH_ANTENNA2) { | 
|  | /* stay in SISO */ | 
|  | tbl->action = IWL_SISO_SWITCH_ANTENNA1; | 
|  | } | 
|  |  | 
|  | /* configure as 1x1 if bt full concurrency */ | 
|  | if (priv->bt_full_concurrent) { | 
|  | valid_tx_ant = first_antenna(priv->hw_params.valid_tx_ant); | 
|  | if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2) | 
|  | tbl->action = IWL_SISO_SWITCH_ANTENNA1; | 
|  | } | 
|  |  | 
|  | start_action = tbl->action; | 
|  | for (;;) { | 
|  | lq_sta->action_counter++; | 
|  | switch (tbl->action) { | 
|  | case IWL_SISO_SWITCH_ANTENNA1: | 
|  | case IWL_SISO_SWITCH_ANTENNA2: | 
|  | IWL_DEBUG_RATE(priv, "LQ: SISO toggle Antenna\n"); | 
|  | if ((tbl->action == IWL_SISO_SWITCH_ANTENNA1 && | 
|  | tx_chains_num <= 1) || | 
|  | (tbl->action == IWL_SISO_SWITCH_ANTENNA2 && | 
|  | tx_chains_num <= 2)) | 
|  | break; | 
|  |  | 
|  | if (window->success_ratio >= IWL_RS_GOOD_RATIO && | 
|  | !priv->bt_full_concurrent && | 
|  | priv->bt_traffic_load == | 
|  | IWL_BT_COEX_TRAFFIC_LOAD_NONE) | 
|  | break; | 
|  |  | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | if (rs_toggle_antenna(valid_tx_ant, | 
|  | &search_tbl->current_rate, search_tbl)) { | 
|  | update_search_tbl_counter = 1; | 
|  | goto out; | 
|  | } | 
|  | break; | 
|  | case IWL_SISO_SWITCH_MIMO2_AB: | 
|  | case IWL_SISO_SWITCH_MIMO2_AC: | 
|  | case IWL_SISO_SWITCH_MIMO2_BC: | 
|  | IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO2\n"); | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | search_tbl->is_SGI = 0; | 
|  |  | 
|  | if (tbl->action == IWL_SISO_SWITCH_MIMO2_AB) | 
|  | search_tbl->ant_type = ANT_AB; | 
|  | else if (tbl->action == IWL_SISO_SWITCH_MIMO2_AC) | 
|  | search_tbl->ant_type = ANT_AC; | 
|  | else | 
|  | search_tbl->ant_type = ANT_BC; | 
|  |  | 
|  | if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) | 
|  | break; | 
|  |  | 
|  | ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, | 
|  | search_tbl, index); | 
|  | if (!ret) | 
|  | goto out; | 
|  | break; | 
|  | case IWL_SISO_SWITCH_GI: | 
|  | if (!tbl->is_ht40 && !(ht_cap->cap & | 
|  | IEEE80211_HT_CAP_SGI_20)) | 
|  | break; | 
|  | if (tbl->is_ht40 && !(ht_cap->cap & | 
|  | IEEE80211_HT_CAP_SGI_40)) | 
|  | break; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: SISO toggle SGI/NGI\n"); | 
|  |  | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | if (is_green) { | 
|  | if (!tbl->is_SGI) | 
|  | break; | 
|  | else | 
|  | IWL_ERR(priv, | 
|  | "SGI was set in GF+SISO\n"); | 
|  | } | 
|  | search_tbl->is_SGI = !tbl->is_SGI; | 
|  | rs_set_expected_tpt_table(lq_sta, search_tbl); | 
|  | if (tbl->is_SGI) { | 
|  | s32 tpt = lq_sta->last_tpt / 100; | 
|  | if (tpt >= search_tbl->expected_tpt[index]) | 
|  | break; | 
|  | } | 
|  | search_tbl->current_rate = | 
|  | rate_n_flags_from_tbl(priv, search_tbl, | 
|  | index, is_green); | 
|  | update_search_tbl_counter = 1; | 
|  | goto out; | 
|  | case IWL_SISO_SWITCH_MIMO3_ABC: | 
|  | IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO3\n"); | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | search_tbl->is_SGI = 0; | 
|  | search_tbl->ant_type = ANT_ABC; | 
|  |  | 
|  | if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) | 
|  | break; | 
|  |  | 
|  | ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta, | 
|  | search_tbl, index); | 
|  | if (!ret) | 
|  | goto out; | 
|  | break; | 
|  | } | 
|  | tbl->action++; | 
|  | if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) | 
|  | tbl->action = IWL_SISO_SWITCH_ANTENNA1; | 
|  |  | 
|  | if (tbl->action == start_action) | 
|  | break; | 
|  | } | 
|  | search_tbl->lq_type = LQ_NONE; | 
|  | return 0; | 
|  |  | 
|  | out: | 
|  | lq_sta->search_better_tbl = 1; | 
|  | tbl->action++; | 
|  | if (tbl->action > IWL_SISO_SWITCH_MIMO3_ABC) | 
|  | tbl->action = IWL_SISO_SWITCH_ANTENNA1; | 
|  | if (update_search_tbl_counter) | 
|  | search_tbl->action = tbl->action; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Try to switch to new modulation mode from MIMO2 | 
|  | */ | 
|  | static int rs_move_mimo2_to_other(struct iwl_priv *priv, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_conf *conf, | 
|  | struct ieee80211_sta *sta, int index) | 
|  | { | 
|  | s8 is_green = lq_sta->is_green; | 
|  | struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | struct iwl_scale_tbl_info *search_tbl = | 
|  | &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); | 
|  | struct iwl_rate_scale_data *window = &(tbl->win[index]); | 
|  | struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; | 
|  | u32 sz = (sizeof(struct iwl_scale_tbl_info) - | 
|  | (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); | 
|  | u8 start_action; | 
|  | u8 valid_tx_ant = priv->hw_params.valid_tx_ant; | 
|  | u8 tx_chains_num = priv->hw_params.tx_chains_num; | 
|  | u8 update_search_tbl_counter = 0; | 
|  | int ret; | 
|  |  | 
|  | switch (priv->bt_traffic_load) { | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_NONE: | 
|  | /* nothing */ | 
|  | break; | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: | 
|  | /* avoid antenna B and MIMO */ | 
|  | if (tbl->action != IWL_MIMO2_SWITCH_SISO_A) | 
|  | tbl->action = IWL_MIMO2_SWITCH_SISO_A; | 
|  | break; | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_LOW: | 
|  | /* avoid antenna B unless MIMO */ | 
|  | if (tbl->action == IWL_MIMO2_SWITCH_SISO_B || | 
|  | tbl->action == IWL_MIMO2_SWITCH_SISO_C) | 
|  | tbl->action = IWL_MIMO2_SWITCH_SISO_A; | 
|  | break; | 
|  | default: | 
|  | IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) && | 
|  | (tbl->action < IWL_MIMO2_SWITCH_SISO_A || | 
|  | tbl->action > IWL_MIMO2_SWITCH_SISO_C)) { | 
|  | /* switch in SISO */ | 
|  | tbl->action = IWL_MIMO2_SWITCH_SISO_A; | 
|  | } | 
|  |  | 
|  | /* configure as 1x1 if bt full concurrency */ | 
|  | if (priv->bt_full_concurrent && | 
|  | (tbl->action < IWL_MIMO2_SWITCH_SISO_A || | 
|  | tbl->action > IWL_MIMO2_SWITCH_SISO_C)) | 
|  | tbl->action = IWL_MIMO2_SWITCH_SISO_A; | 
|  |  | 
|  | start_action = tbl->action; | 
|  | for (;;) { | 
|  | lq_sta->action_counter++; | 
|  | switch (tbl->action) { | 
|  | case IWL_MIMO2_SWITCH_ANTENNA1: | 
|  | case IWL_MIMO2_SWITCH_ANTENNA2: | 
|  | IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle Antennas\n"); | 
|  |  | 
|  | if (tx_chains_num <= 2) | 
|  | break; | 
|  |  | 
|  | if (window->success_ratio >= IWL_RS_GOOD_RATIO) | 
|  | break; | 
|  |  | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | if (rs_toggle_antenna(valid_tx_ant, | 
|  | &search_tbl->current_rate, search_tbl)) { | 
|  | update_search_tbl_counter = 1; | 
|  | goto out; | 
|  | } | 
|  | break; | 
|  | case IWL_MIMO2_SWITCH_SISO_A: | 
|  | case IWL_MIMO2_SWITCH_SISO_B: | 
|  | case IWL_MIMO2_SWITCH_SISO_C: | 
|  | IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to SISO\n"); | 
|  |  | 
|  | /* Set up new search table for SISO */ | 
|  | memcpy(search_tbl, tbl, sz); | 
|  |  | 
|  | if (tbl->action == IWL_MIMO2_SWITCH_SISO_A) | 
|  | search_tbl->ant_type = ANT_A; | 
|  | else if (tbl->action == IWL_MIMO2_SWITCH_SISO_B) | 
|  | search_tbl->ant_type = ANT_B; | 
|  | else | 
|  | search_tbl->ant_type = ANT_C; | 
|  |  | 
|  | if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) | 
|  | break; | 
|  |  | 
|  | ret = rs_switch_to_siso(priv, lq_sta, conf, sta, | 
|  | search_tbl, index); | 
|  | if (!ret) | 
|  | goto out; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case IWL_MIMO2_SWITCH_GI: | 
|  | if (!tbl->is_ht40 && !(ht_cap->cap & | 
|  | IEEE80211_HT_CAP_SGI_20)) | 
|  | break; | 
|  | if (tbl->is_ht40 && !(ht_cap->cap & | 
|  | IEEE80211_HT_CAP_SGI_40)) | 
|  | break; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle SGI/NGI\n"); | 
|  |  | 
|  | /* Set up new search table for MIMO2 */ | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | search_tbl->is_SGI = !tbl->is_SGI; | 
|  | rs_set_expected_tpt_table(lq_sta, search_tbl); | 
|  | /* | 
|  | * If active table already uses the fastest possible | 
|  | * modulation (dual stream with short guard interval), | 
|  | * and it's working well, there's no need to look | 
|  | * for a better type of modulation! | 
|  | */ | 
|  | if (tbl->is_SGI) { | 
|  | s32 tpt = lq_sta->last_tpt / 100; | 
|  | if (tpt >= search_tbl->expected_tpt[index]) | 
|  | break; | 
|  | } | 
|  | search_tbl->current_rate = | 
|  | rate_n_flags_from_tbl(priv, search_tbl, | 
|  | index, is_green); | 
|  | update_search_tbl_counter = 1; | 
|  | goto out; | 
|  |  | 
|  | case IWL_MIMO2_SWITCH_MIMO3_ABC: | 
|  | IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to MIMO3\n"); | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | search_tbl->is_SGI = 0; | 
|  | search_tbl->ant_type = ANT_ABC; | 
|  |  | 
|  | if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) | 
|  | break; | 
|  |  | 
|  | ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta, | 
|  | search_tbl, index); | 
|  | if (!ret) | 
|  | goto out; | 
|  |  | 
|  | break; | 
|  | } | 
|  | tbl->action++; | 
|  | if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC) | 
|  | tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; | 
|  |  | 
|  | if (tbl->action == start_action) | 
|  | break; | 
|  | } | 
|  | search_tbl->lq_type = LQ_NONE; | 
|  | return 0; | 
|  | out: | 
|  | lq_sta->search_better_tbl = 1; | 
|  | tbl->action++; | 
|  | if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC) | 
|  | tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; | 
|  | if (update_search_tbl_counter) | 
|  | search_tbl->action = tbl->action; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Try to switch to new modulation mode from MIMO3 | 
|  | */ | 
|  | static int rs_move_mimo3_to_other(struct iwl_priv *priv, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct ieee80211_conf *conf, | 
|  | struct ieee80211_sta *sta, int index) | 
|  | { | 
|  | s8 is_green = lq_sta->is_green; | 
|  | struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | struct iwl_scale_tbl_info *search_tbl = | 
|  | &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); | 
|  | struct iwl_rate_scale_data *window = &(tbl->win[index]); | 
|  | struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; | 
|  | u32 sz = (sizeof(struct iwl_scale_tbl_info) - | 
|  | (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); | 
|  | u8 start_action; | 
|  | u8 valid_tx_ant = priv->hw_params.valid_tx_ant; | 
|  | u8 tx_chains_num = priv->hw_params.tx_chains_num; | 
|  | int ret; | 
|  | u8 update_search_tbl_counter = 0; | 
|  |  | 
|  | switch (priv->bt_traffic_load) { | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_NONE: | 
|  | /* nothing */ | 
|  | break; | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: | 
|  | /* avoid antenna B and MIMO */ | 
|  | if (tbl->action != IWL_MIMO3_SWITCH_SISO_A) | 
|  | tbl->action = IWL_MIMO3_SWITCH_SISO_A; | 
|  | break; | 
|  | case IWL_BT_COEX_TRAFFIC_LOAD_LOW: | 
|  | /* avoid antenna B unless MIMO */ | 
|  | if (tbl->action == IWL_MIMO3_SWITCH_SISO_B || | 
|  | tbl->action == IWL_MIMO3_SWITCH_SISO_C) | 
|  | tbl->action = IWL_MIMO3_SWITCH_SISO_A; | 
|  | break; | 
|  | default: | 
|  | IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) && | 
|  | (tbl->action < IWL_MIMO3_SWITCH_SISO_A || | 
|  | tbl->action > IWL_MIMO3_SWITCH_SISO_C)) { | 
|  | /* switch in SISO */ | 
|  | tbl->action = IWL_MIMO3_SWITCH_SISO_A; | 
|  | } | 
|  |  | 
|  | /* configure as 1x1 if bt full concurrency */ | 
|  | if (priv->bt_full_concurrent && | 
|  | (tbl->action < IWL_MIMO3_SWITCH_SISO_A || | 
|  | tbl->action > IWL_MIMO3_SWITCH_SISO_C)) | 
|  | tbl->action = IWL_MIMO3_SWITCH_SISO_A; | 
|  |  | 
|  | start_action = tbl->action; | 
|  | for (;;) { | 
|  | lq_sta->action_counter++; | 
|  | switch (tbl->action) { | 
|  | case IWL_MIMO3_SWITCH_ANTENNA1: | 
|  | case IWL_MIMO3_SWITCH_ANTENNA2: | 
|  | IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle Antennas\n"); | 
|  |  | 
|  | if (tx_chains_num <= 3) | 
|  | break; | 
|  |  | 
|  | if (window->success_ratio >= IWL_RS_GOOD_RATIO) | 
|  | break; | 
|  |  | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | if (rs_toggle_antenna(valid_tx_ant, | 
|  | &search_tbl->current_rate, search_tbl)) | 
|  | goto out; | 
|  | break; | 
|  | case IWL_MIMO3_SWITCH_SISO_A: | 
|  | case IWL_MIMO3_SWITCH_SISO_B: | 
|  | case IWL_MIMO3_SWITCH_SISO_C: | 
|  | IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to SISO\n"); | 
|  |  | 
|  | /* Set up new search table for SISO */ | 
|  | memcpy(search_tbl, tbl, sz); | 
|  |  | 
|  | if (tbl->action == IWL_MIMO3_SWITCH_SISO_A) | 
|  | search_tbl->ant_type = ANT_A; | 
|  | else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B) | 
|  | search_tbl->ant_type = ANT_B; | 
|  | else | 
|  | search_tbl->ant_type = ANT_C; | 
|  |  | 
|  | if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) | 
|  | break; | 
|  |  | 
|  | ret = rs_switch_to_siso(priv, lq_sta, conf, sta, | 
|  | search_tbl, index); | 
|  | if (!ret) | 
|  | goto out; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case IWL_MIMO3_SWITCH_MIMO2_AB: | 
|  | case IWL_MIMO3_SWITCH_MIMO2_AC: | 
|  | case IWL_MIMO3_SWITCH_MIMO2_BC: | 
|  | IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to MIMO2\n"); | 
|  |  | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | search_tbl->is_SGI = 0; | 
|  | if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB) | 
|  | search_tbl->ant_type = ANT_AB; | 
|  | else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC) | 
|  | search_tbl->ant_type = ANT_AC; | 
|  | else | 
|  | search_tbl->ant_type = ANT_BC; | 
|  |  | 
|  | if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) | 
|  | break; | 
|  |  | 
|  | ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, | 
|  | search_tbl, index); | 
|  | if (!ret) | 
|  | goto out; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case IWL_MIMO3_SWITCH_GI: | 
|  | if (!tbl->is_ht40 && !(ht_cap->cap & | 
|  | IEEE80211_HT_CAP_SGI_20)) | 
|  | break; | 
|  | if (tbl->is_ht40 && !(ht_cap->cap & | 
|  | IEEE80211_HT_CAP_SGI_40)) | 
|  | break; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle SGI/NGI\n"); | 
|  |  | 
|  | /* Set up new search table for MIMO */ | 
|  | memcpy(search_tbl, tbl, sz); | 
|  | search_tbl->is_SGI = !tbl->is_SGI; | 
|  | rs_set_expected_tpt_table(lq_sta, search_tbl); | 
|  | /* | 
|  | * If active table already uses the fastest possible | 
|  | * modulation (dual stream with short guard interval), | 
|  | * and it's working well, there's no need to look | 
|  | * for a better type of modulation! | 
|  | */ | 
|  | if (tbl->is_SGI) { | 
|  | s32 tpt = lq_sta->last_tpt / 100; | 
|  | if (tpt >= search_tbl->expected_tpt[index]) | 
|  | break; | 
|  | } | 
|  | search_tbl->current_rate = | 
|  | rate_n_flags_from_tbl(priv, search_tbl, | 
|  | index, is_green); | 
|  | update_search_tbl_counter = 1; | 
|  | goto out; | 
|  | } | 
|  | tbl->action++; | 
|  | if (tbl->action > IWL_MIMO3_SWITCH_GI) | 
|  | tbl->action = IWL_MIMO3_SWITCH_ANTENNA1; | 
|  |  | 
|  | if (tbl->action == start_action) | 
|  | break; | 
|  | } | 
|  | search_tbl->lq_type = LQ_NONE; | 
|  | return 0; | 
|  | out: | 
|  | lq_sta->search_better_tbl = 1; | 
|  | tbl->action++; | 
|  | if (tbl->action > IWL_MIMO3_SWITCH_GI) | 
|  | tbl->action = IWL_MIMO3_SWITCH_ANTENNA1; | 
|  | if (update_search_tbl_counter) | 
|  | search_tbl->action = tbl->action; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check whether we should continue using same modulation mode, or | 
|  | * begin search for a new mode, based on: | 
|  | * 1) # tx successes or failures while using this mode | 
|  | * 2) # times calling this function | 
|  | * 3) elapsed time in this mode (not used, for now) | 
|  | */ | 
|  | static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search) | 
|  | { | 
|  | struct iwl_scale_tbl_info *tbl; | 
|  | int i; | 
|  | int active_tbl; | 
|  | int flush_interval_passed = 0; | 
|  | struct iwl_priv *priv; | 
|  |  | 
|  | priv = lq_sta->drv; | 
|  | active_tbl = lq_sta->active_tbl; | 
|  |  | 
|  | tbl = &(lq_sta->lq_info[active_tbl]); | 
|  |  | 
|  | /* If we've been disallowing search, see if we should now allow it */ | 
|  | if (lq_sta->stay_in_tbl) { | 
|  |  | 
|  | /* Elapsed time using current modulation mode */ | 
|  | if (lq_sta->flush_timer) | 
|  | flush_interval_passed = | 
|  | time_after(jiffies, | 
|  | (unsigned long)(lq_sta->flush_timer + | 
|  | IWL_RATE_SCALE_FLUSH_INTVL)); | 
|  |  | 
|  | /* | 
|  | * Check if we should allow search for new modulation mode. | 
|  | * If many frames have failed or succeeded, or we've used | 
|  | * this same modulation for a long time, allow search, and | 
|  | * reset history stats that keep track of whether we should | 
|  | * allow a new search.  Also (below) reset all bitmaps and | 
|  | * stats in active history. | 
|  | */ | 
|  | if (force_search || | 
|  | (lq_sta->total_failed > lq_sta->max_failure_limit) || | 
|  | (lq_sta->total_success > lq_sta->max_success_limit) || | 
|  | ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer) | 
|  | && (flush_interval_passed))) { | 
|  | IWL_DEBUG_RATE(priv, "LQ: stay is expired %d %d %d\n:", | 
|  | lq_sta->total_failed, | 
|  | lq_sta->total_success, | 
|  | flush_interval_passed); | 
|  |  | 
|  | /* Allow search for new mode */ | 
|  | lq_sta->stay_in_tbl = 0;	/* only place reset */ | 
|  | lq_sta->total_failed = 0; | 
|  | lq_sta->total_success = 0; | 
|  | lq_sta->flush_timer = 0; | 
|  |  | 
|  | /* | 
|  | * Else if we've used this modulation mode enough repetitions | 
|  | * (regardless of elapsed time or success/failure), reset | 
|  | * history bitmaps and rate-specific stats for all rates in | 
|  | * active table. | 
|  | */ | 
|  | } else { | 
|  | lq_sta->table_count++; | 
|  | if (lq_sta->table_count >= | 
|  | lq_sta->table_count_limit) { | 
|  | lq_sta->table_count = 0; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: stay in table clear win\n"); | 
|  | for (i = 0; i < IWL_RATE_COUNT; i++) | 
|  | rs_rate_scale_clear_window( | 
|  | &(tbl->win[i])); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* If transitioning to allow "search", reset all history | 
|  | * bitmaps and stats in active table (this will become the new | 
|  | * "search" table). */ | 
|  | if (!lq_sta->stay_in_tbl) { | 
|  | for (i = 0; i < IWL_RATE_COUNT; i++) | 
|  | rs_rate_scale_clear_window(&(tbl->win[i])); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * setup rate table in uCode | 
|  | * return rate_n_flags as used in the table | 
|  | */ | 
|  | static void rs_update_rate_tbl(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx, | 
|  | struct iwl_lq_sta *lq_sta, | 
|  | struct iwl_scale_tbl_info *tbl, | 
|  | int index, u8 is_green) | 
|  | { | 
|  | u32 rate; | 
|  |  | 
|  | /* Update uCode's rate table. */ | 
|  | rate = rate_n_flags_from_tbl(priv, tbl, index, is_green); | 
|  | rs_fill_link_cmd(priv, lq_sta, rate); | 
|  | iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Do rate scaling and search for new modulation mode. | 
|  | */ | 
|  | static void rs_rate_scale_perform(struct iwl_priv *priv, | 
|  | struct sk_buff *skb, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta) | 
|  | { | 
|  | struct ieee80211_hw *hw = priv->hw; | 
|  | struct ieee80211_conf *conf = &hw->conf; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
|  | int low = IWL_RATE_INVALID; | 
|  | int high = IWL_RATE_INVALID; | 
|  | int index; | 
|  | int i; | 
|  | struct iwl_rate_scale_data *window = NULL; | 
|  | int current_tpt = IWL_INVALID_VALUE; | 
|  | int low_tpt = IWL_INVALID_VALUE; | 
|  | int high_tpt = IWL_INVALID_VALUE; | 
|  | u32 fail_count; | 
|  | s8 scale_action = 0; | 
|  | u16 rate_mask; | 
|  | u8 update_lq = 0; | 
|  | struct iwl_scale_tbl_info *tbl, *tbl1; | 
|  | u16 rate_scale_index_msk = 0; | 
|  | u8 is_green = 0; | 
|  | u8 active_tbl = 0; | 
|  | u8 done_search = 0; | 
|  | u16 high_low; | 
|  | s32 sr; | 
|  | u8 tid = MAX_TID_COUNT; | 
|  | struct iwl_tid_data *tid_data; | 
|  | struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; | 
|  | struct iwl_rxon_context *ctx = sta_priv->common.ctx; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n"); | 
|  |  | 
|  | /* Send management frames and NO_ACK data using lowest rate. */ | 
|  | /* TODO: this could probably be improved.. */ | 
|  | if (!ieee80211_is_data(hdr->frame_control) || | 
|  | info->flags & IEEE80211_TX_CTL_NO_ACK) | 
|  | return; | 
|  |  | 
|  | if (!sta || !lq_sta) | 
|  | return; | 
|  |  | 
|  | lq_sta->supp_rates = sta->supp_rates[lq_sta->band]; | 
|  |  | 
|  | tid = rs_tl_add_packet(lq_sta, hdr); | 
|  | if ((tid != MAX_TID_COUNT) && (lq_sta->tx_agg_tid_en & (1 << tid))) { | 
|  | tid_data = &priv->stations[lq_sta->lq.sta_id].tid[tid]; | 
|  | if (tid_data->agg.state == IWL_AGG_OFF) | 
|  | lq_sta->is_agg = 0; | 
|  | else | 
|  | lq_sta->is_agg = 1; | 
|  | } else | 
|  | lq_sta->is_agg = 0; | 
|  |  | 
|  | /* | 
|  | * Select rate-scale / modulation-mode table to work with in | 
|  | * the rest of this function:  "search" if searching for better | 
|  | * modulation mode, or "active" if doing rate scaling within a mode. | 
|  | */ | 
|  | if (!lq_sta->search_better_tbl) | 
|  | active_tbl = lq_sta->active_tbl; | 
|  | else | 
|  | active_tbl = 1 - lq_sta->active_tbl; | 
|  |  | 
|  | tbl = &(lq_sta->lq_info[active_tbl]); | 
|  | if (is_legacy(tbl->lq_type)) | 
|  | lq_sta->is_green = 0; | 
|  | else | 
|  | lq_sta->is_green = rs_use_green(sta); | 
|  | is_green = lq_sta->is_green; | 
|  |  | 
|  | /* current tx rate */ | 
|  | index = lq_sta->last_txrate_idx; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "Rate scale index %d for type %d\n", index, | 
|  | tbl->lq_type); | 
|  |  | 
|  | /* rates available for this association, and for modulation mode */ | 
|  | rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "mask 0x%04X\n", rate_mask); | 
|  |  | 
|  | /* mask with station rate restriction */ | 
|  | if (is_legacy(tbl->lq_type)) { | 
|  | if (lq_sta->band == IEEE80211_BAND_5GHZ) | 
|  | /* supp_rates has no CCK bits in A mode */ | 
|  | rate_scale_index_msk = (u16) (rate_mask & | 
|  | (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); | 
|  | else | 
|  | rate_scale_index_msk = (u16) (rate_mask & | 
|  | lq_sta->supp_rates); | 
|  |  | 
|  | } else | 
|  | rate_scale_index_msk = rate_mask; | 
|  |  | 
|  | if (!rate_scale_index_msk) | 
|  | rate_scale_index_msk = rate_mask; | 
|  |  | 
|  | if (!((1 << index) & rate_scale_index_msk)) { | 
|  | IWL_ERR(priv, "Current Rate is not valid\n"); | 
|  | if (lq_sta->search_better_tbl) { | 
|  | /* revert to active table if search table is not valid*/ | 
|  | tbl->lq_type = LQ_NONE; | 
|  | lq_sta->search_better_tbl = 0; | 
|  | tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | /* get "active" rate info */ | 
|  | index = iwl_hwrate_to_plcp_idx(tbl->current_rate); | 
|  | rs_update_rate_tbl(priv, ctx, lq_sta, tbl, | 
|  | index, is_green); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Get expected throughput table and history window for current rate */ | 
|  | if (!tbl->expected_tpt) { | 
|  | IWL_ERR(priv, "tbl->expected_tpt is NULL\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* force user max rate if set by user */ | 
|  | if ((lq_sta->max_rate_idx != -1) && | 
|  | (lq_sta->max_rate_idx < index)) { | 
|  | index = lq_sta->max_rate_idx; | 
|  | update_lq = 1; | 
|  | window = &(tbl->win[index]); | 
|  | goto lq_update; | 
|  | } | 
|  |  | 
|  | window = &(tbl->win[index]); | 
|  |  | 
|  | /* | 
|  | * If there is not enough history to calculate actual average | 
|  | * throughput, keep analyzing results of more tx frames, without | 
|  | * changing rate or mode (bypass most of the rest of this function). | 
|  | * Set up new rate table in uCode only if old rate is not supported | 
|  | * in current association (use new rate found above). | 
|  | */ | 
|  | fail_count = window->counter - window->success_counter; | 
|  | if ((fail_count < IWL_RATE_MIN_FAILURE_TH) && | 
|  | (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) { | 
|  | IWL_DEBUG_RATE(priv, "LQ: still below TH. succ=%d total=%d " | 
|  | "for index %d\n", | 
|  | window->success_counter, window->counter, index); | 
|  |  | 
|  | /* Can't calculate this yet; not enough history */ | 
|  | window->average_tpt = IWL_INVALID_VALUE; | 
|  |  | 
|  | /* Should we stay with this modulation mode, | 
|  | * or search for a new one? */ | 
|  | rs_stay_in_table(lq_sta, false); | 
|  |  | 
|  | goto out; | 
|  | } | 
|  | /* Else we have enough samples; calculate estimate of | 
|  | * actual average throughput */ | 
|  | if (window->average_tpt != ((window->success_ratio * | 
|  | tbl->expected_tpt[index] + 64) / 128)) { | 
|  | IWL_ERR(priv, "expected_tpt should have been calculated by now\n"); | 
|  | window->average_tpt = ((window->success_ratio * | 
|  | tbl->expected_tpt[index] + 64) / 128); | 
|  | } | 
|  |  | 
|  | /* If we are searching for better modulation mode, check success. */ | 
|  | if (lq_sta->search_better_tbl && | 
|  | (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI)) { | 
|  | /* If good success, continue using the "search" mode; | 
|  | * no need to send new link quality command, since we're | 
|  | * continuing to use the setup that we've been trying. */ | 
|  | if (window->average_tpt > lq_sta->last_tpt) { | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: SWITCHING TO NEW TABLE " | 
|  | "suc=%d cur-tpt=%d old-tpt=%d\n", | 
|  | window->success_ratio, | 
|  | window->average_tpt, | 
|  | lq_sta->last_tpt); | 
|  |  | 
|  | if (!is_legacy(tbl->lq_type)) | 
|  | lq_sta->enable_counter = 1; | 
|  |  | 
|  | /* Swap tables; "search" becomes "active" */ | 
|  | lq_sta->active_tbl = active_tbl; | 
|  | current_tpt = window->average_tpt; | 
|  |  | 
|  | /* Else poor success; go back to mode in "active" table */ | 
|  | } else { | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: GOING BACK TO THE OLD TABLE " | 
|  | "suc=%d cur-tpt=%d old-tpt=%d\n", | 
|  | window->success_ratio, | 
|  | window->average_tpt, | 
|  | lq_sta->last_tpt); | 
|  |  | 
|  | /* Nullify "search" table */ | 
|  | tbl->lq_type = LQ_NONE; | 
|  |  | 
|  | /* Revert to "active" table */ | 
|  | active_tbl = lq_sta->active_tbl; | 
|  | tbl = &(lq_sta->lq_info[active_tbl]); | 
|  |  | 
|  | /* Revert to "active" rate and throughput info */ | 
|  | index = iwl_hwrate_to_plcp_idx(tbl->current_rate); | 
|  | current_tpt = lq_sta->last_tpt; | 
|  |  | 
|  | /* Need to set up a new rate table in uCode */ | 
|  | update_lq = 1; | 
|  | } | 
|  |  | 
|  | /* Either way, we've made a decision; modulation mode | 
|  | * search is done, allow rate adjustment next time. */ | 
|  | lq_sta->search_better_tbl = 0; | 
|  | done_search = 1;	/* Don't switch modes below! */ | 
|  | goto lq_update; | 
|  | } | 
|  |  | 
|  | /* (Else) not in search of better modulation mode, try for better | 
|  | * starting rate, while staying in this mode. */ | 
|  | high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk, | 
|  | tbl->lq_type); | 
|  | low = high_low & 0xff; | 
|  | high = (high_low >> 8) & 0xff; | 
|  |  | 
|  | /* If user set max rate, dont allow higher than user constrain */ | 
|  | if ((lq_sta->max_rate_idx != -1) && | 
|  | (lq_sta->max_rate_idx < high)) | 
|  | high = IWL_RATE_INVALID; | 
|  |  | 
|  | sr = window->success_ratio; | 
|  |  | 
|  | /* Collect measured throughputs for current and adjacent rates */ | 
|  | current_tpt = window->average_tpt; | 
|  | if (low != IWL_RATE_INVALID) | 
|  | low_tpt = tbl->win[low].average_tpt; | 
|  | if (high != IWL_RATE_INVALID) | 
|  | high_tpt = tbl->win[high].average_tpt; | 
|  |  | 
|  | scale_action = 0; | 
|  |  | 
|  | /* Too many failures, decrease rate */ | 
|  | if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) { | 
|  | IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n"); | 
|  | scale_action = -1; | 
|  |  | 
|  | /* No throughput measured yet for adjacent rates; try increase. */ | 
|  | } else if ((low_tpt == IWL_INVALID_VALUE) && | 
|  | (high_tpt == IWL_INVALID_VALUE)) { | 
|  |  | 
|  | if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) | 
|  | scale_action = 1; | 
|  | else if (low != IWL_RATE_INVALID) | 
|  | scale_action = 0; | 
|  | } | 
|  |  | 
|  | /* Both adjacent throughputs are measured, but neither one has better | 
|  | * throughput; we're using the best rate, don't change it! */ | 
|  | else if ((low_tpt != IWL_INVALID_VALUE) && | 
|  | (high_tpt != IWL_INVALID_VALUE) && | 
|  | (low_tpt < current_tpt) && | 
|  | (high_tpt < current_tpt)) | 
|  | scale_action = 0; | 
|  |  | 
|  | /* At least one adjacent rate's throughput is measured, | 
|  | * and may have better performance. */ | 
|  | else { | 
|  | /* Higher adjacent rate's throughput is measured */ | 
|  | if (high_tpt != IWL_INVALID_VALUE) { | 
|  | /* Higher rate has better throughput */ | 
|  | if (high_tpt > current_tpt && | 
|  | sr >= IWL_RATE_INCREASE_TH) { | 
|  | scale_action = 1; | 
|  | } else { | 
|  | scale_action = 0; | 
|  | } | 
|  |  | 
|  | /* Lower adjacent rate's throughput is measured */ | 
|  | } else if (low_tpt != IWL_INVALID_VALUE) { | 
|  | /* Lower rate has better throughput */ | 
|  | if (low_tpt > current_tpt) { | 
|  | IWL_DEBUG_RATE(priv, | 
|  | "decrease rate because of low tpt\n"); | 
|  | scale_action = -1; | 
|  | } else if (sr >= IWL_RATE_INCREASE_TH) { | 
|  | scale_action = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Sanity check; asked for decrease, but success rate or throughput | 
|  | * has been good at old rate.  Don't change it. */ | 
|  | if ((scale_action == -1) && (low != IWL_RATE_INVALID) && | 
|  | ((sr > IWL_RATE_HIGH_TH) || | 
|  | (current_tpt > (100 * tbl->expected_tpt[low])))) | 
|  | scale_action = 0; | 
|  | if (!iwl_ht_enabled(priv) && !is_legacy(tbl->lq_type)) | 
|  | scale_action = -1; | 
|  | if (iwl_tx_ant_restriction(priv) != IWL_ANT_OK_MULTI && | 
|  | (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) | 
|  | scale_action = -1; | 
|  |  | 
|  | if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && | 
|  | (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) { | 
|  | if (lq_sta->last_bt_traffic > priv->bt_traffic_load) { | 
|  | /* | 
|  | * don't set scale_action, don't want to scale up if | 
|  | * the rate scale doesn't otherwise think that is a | 
|  | * good idea. | 
|  | */ | 
|  | } else if (lq_sta->last_bt_traffic <= priv->bt_traffic_load) { | 
|  | scale_action = -1; | 
|  | } | 
|  | } | 
|  | lq_sta->last_bt_traffic = priv->bt_traffic_load; | 
|  |  | 
|  | if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && | 
|  | (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) { | 
|  | /* search for a new modulation */ | 
|  | rs_stay_in_table(lq_sta, true); | 
|  | goto lq_update; | 
|  | } | 
|  |  | 
|  | switch (scale_action) { | 
|  | case -1: | 
|  | /* Decrease starting rate, update uCode's rate table */ | 
|  | if (low != IWL_RATE_INVALID) { | 
|  | update_lq = 1; | 
|  | index = low; | 
|  | } | 
|  |  | 
|  | break; | 
|  | case 1: | 
|  | /* Increase starting rate, update uCode's rate table */ | 
|  | if (high != IWL_RATE_INVALID) { | 
|  | update_lq = 1; | 
|  | index = high; | 
|  | } | 
|  |  | 
|  | break; | 
|  | case 0: | 
|  | /* No change */ | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "choose rate scale index %d action %d low %d " | 
|  | "high %d type %d\n", | 
|  | index, scale_action, low, high, tbl->lq_type); | 
|  |  | 
|  | lq_update: | 
|  | /* Replace uCode's rate table for the destination station. */ | 
|  | if (update_lq) | 
|  | rs_update_rate_tbl(priv, ctx, lq_sta, tbl, index, is_green); | 
|  |  | 
|  | if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI) { | 
|  | /* Should we stay with this modulation mode, | 
|  | * or search for a new one? */ | 
|  | rs_stay_in_table(lq_sta, false); | 
|  | } | 
|  | /* | 
|  | * Search for new modulation mode if we're: | 
|  | * 1)  Not changing rates right now | 
|  | * 2)  Not just finishing up a search | 
|  | * 3)  Allowing a new search | 
|  | */ | 
|  | if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { | 
|  | /* Save current throughput to compare with "search" throughput*/ | 
|  | lq_sta->last_tpt = current_tpt; | 
|  |  | 
|  | /* Select a new "search" modulation mode to try. | 
|  | * If one is found, set up the new "search" table. */ | 
|  | if (is_legacy(tbl->lq_type)) | 
|  | rs_move_legacy_other(priv, lq_sta, conf, sta, index); | 
|  | else if (is_siso(tbl->lq_type)) | 
|  | rs_move_siso_to_other(priv, lq_sta, conf, sta, index); | 
|  | else if (is_mimo2(tbl->lq_type)) | 
|  | rs_move_mimo2_to_other(priv, lq_sta, conf, sta, index); | 
|  | else | 
|  | rs_move_mimo3_to_other(priv, lq_sta, conf, sta, index); | 
|  |  | 
|  | /* If new "search" mode was selected, set up in uCode table */ | 
|  | if (lq_sta->search_better_tbl) { | 
|  | /* Access the "search" table, clear its history. */ | 
|  | tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); | 
|  | for (i = 0; i < IWL_RATE_COUNT; i++) | 
|  | rs_rate_scale_clear_window(&(tbl->win[i])); | 
|  |  | 
|  | /* Use new "search" start rate */ | 
|  | index = iwl_hwrate_to_plcp_idx(tbl->current_rate); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "Switch current  mcs: %X index: %d\n", | 
|  | tbl->current_rate, index); | 
|  | rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); | 
|  | iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); | 
|  | } else | 
|  | done_search = 1; | 
|  | } | 
|  |  | 
|  | if (done_search && !lq_sta->stay_in_tbl) { | 
|  | /* If the "active" (non-search) mode was legacy, | 
|  | * and we've tried switching antennas, | 
|  | * but we haven't been able to try HT modes (not available), | 
|  | * stay with best antenna legacy modulation for a while | 
|  | * before next round of mode comparisons. */ | 
|  | tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  | if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) && | 
|  | lq_sta->action_counter > tbl1->max_search) { | 
|  | IWL_DEBUG_RATE(priv, "LQ: STAY in legacy table\n"); | 
|  | rs_set_stay_in_table(priv, 1, lq_sta); | 
|  | } | 
|  |  | 
|  | /* If we're in an HT mode, and all 3 mode switch actions | 
|  | * have been tried and compared, stay in this best modulation | 
|  | * mode for a while before next round of mode comparisons. */ | 
|  | if (lq_sta->enable_counter && | 
|  | (lq_sta->action_counter >= tbl1->max_search) && | 
|  | iwl_ht_enabled(priv)) { | 
|  | if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && | 
|  | (lq_sta->tx_agg_tid_en & (1 << tid)) && | 
|  | (tid != MAX_TID_COUNT)) { | 
|  | tid_data = | 
|  | &priv->stations[lq_sta->lq.sta_id].tid[tid]; | 
|  | if (tid_data->agg.state == IWL_AGG_OFF) { | 
|  | IWL_DEBUG_RATE(priv, | 
|  | "try to aggregate tid %d\n", | 
|  | tid); | 
|  | rs_tl_turn_on_agg(priv, tid, | 
|  | lq_sta, sta); | 
|  | } | 
|  | } | 
|  | rs_set_stay_in_table(priv, 0, lq_sta); | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, index, is_green); | 
|  | i = index; | 
|  | lq_sta->last_txrate_idx = i; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rs_initialize_lq - Initialize a station's hardware rate table | 
|  | * | 
|  | * The uCode's station table contains a table of fallback rates | 
|  | * for automatic fallback during transmission. | 
|  | * | 
|  | * NOTE: This sets up a default set of values.  These will be replaced later | 
|  | *       if the driver's iwl-agn-rs rate scaling algorithm is used, instead of | 
|  | *       rc80211_simple. | 
|  | * | 
|  | * NOTE: Run REPLY_ADD_STA command to set up station table entry, before | 
|  | *       calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, | 
|  | *       which requires station table entry to exist). | 
|  | */ | 
|  | static void rs_initialize_lq(struct iwl_priv *priv, | 
|  | struct ieee80211_conf *conf, | 
|  | struct ieee80211_sta *sta, | 
|  | struct iwl_lq_sta *lq_sta) | 
|  | { | 
|  | struct iwl_scale_tbl_info *tbl; | 
|  | int rate_idx; | 
|  | int i; | 
|  | u32 rate; | 
|  | u8 use_green = rs_use_green(sta); | 
|  | u8 active_tbl = 0; | 
|  | u8 valid_tx_ant; | 
|  | struct iwl_station_priv *sta_priv; | 
|  | struct iwl_rxon_context *ctx; | 
|  |  | 
|  | if (!sta || !lq_sta) | 
|  | return; | 
|  |  | 
|  | sta_priv = (void *)sta->drv_priv; | 
|  | ctx = sta_priv->common.ctx; | 
|  |  | 
|  | i = lq_sta->last_txrate_idx; | 
|  |  | 
|  | valid_tx_ant = priv->hw_params.valid_tx_ant; | 
|  |  | 
|  | if (!lq_sta->search_better_tbl) | 
|  | active_tbl = lq_sta->active_tbl; | 
|  | else | 
|  | active_tbl = 1 - lq_sta->active_tbl; | 
|  |  | 
|  | tbl = &(lq_sta->lq_info[active_tbl]); | 
|  |  | 
|  | if ((i < 0) || (i >= IWL_RATE_COUNT)) | 
|  | i = 0; | 
|  |  | 
|  | rate = iwl_rates[i].plcp; | 
|  | tbl->ant_type = first_antenna(valid_tx_ant); | 
|  | rate |= tbl->ant_type << RATE_MCS_ANT_POS; | 
|  |  | 
|  | if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE) | 
|  | rate |= RATE_MCS_CCK_MSK; | 
|  |  | 
|  | rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx); | 
|  | if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type)) | 
|  | rs_toggle_antenna(valid_tx_ant, &rate, tbl); | 
|  |  | 
|  | rate = rate_n_flags_from_tbl(priv, tbl, rate_idx, use_green); | 
|  | tbl->current_rate = rate; | 
|  | rs_set_expected_tpt_table(lq_sta, tbl); | 
|  | rs_fill_link_cmd(NULL, lq_sta, rate); | 
|  | priv->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq; | 
|  | iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_SYNC, true); | 
|  | } | 
|  |  | 
|  | static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, | 
|  | struct ieee80211_tx_rate_control *txrc) | 
|  | { | 
|  |  | 
|  | struct sk_buff *skb = txrc->skb; | 
|  | struct ieee80211_supported_band *sband = txrc->sband; | 
|  | struct iwl_priv *priv __maybe_unused = (struct iwl_priv *)priv_r; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct iwl_lq_sta *lq_sta = priv_sta; | 
|  | int rate_idx; | 
|  |  | 
|  | IWL_DEBUG_RATE_LIMIT(priv, "rate scale calculate new rate for skb\n"); | 
|  |  | 
|  | /* Get max rate if user set max rate */ | 
|  | if (lq_sta) { | 
|  | lq_sta->max_rate_idx = txrc->max_rate_idx; | 
|  | if ((sband->band == IEEE80211_BAND_5GHZ) && | 
|  | (lq_sta->max_rate_idx != -1)) | 
|  | lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE; | 
|  | if ((lq_sta->max_rate_idx < 0) || | 
|  | (lq_sta->max_rate_idx >= IWL_RATE_COUNT)) | 
|  | lq_sta->max_rate_idx = -1; | 
|  | } | 
|  |  | 
|  | /* Treat uninitialized rate scaling data same as non-existing. */ | 
|  | if (lq_sta && !lq_sta->drv) { | 
|  | IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n"); | 
|  | priv_sta = NULL; | 
|  | } | 
|  |  | 
|  | /* Send management frames and NO_ACK data using lowest rate. */ | 
|  | if (rate_control_send_low(sta, priv_sta, txrc)) | 
|  | return; | 
|  |  | 
|  | rate_idx  = lq_sta->last_txrate_idx; | 
|  |  | 
|  | if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) { | 
|  | rate_idx -= IWL_FIRST_OFDM_RATE; | 
|  | /* 6M and 9M shared same MCS index */ | 
|  | rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0; | 
|  | if (rs_extract_rate(lq_sta->last_rate_n_flags) >= | 
|  | IWL_RATE_MIMO3_6M_PLCP) | 
|  | rate_idx = rate_idx + (2 * MCS_INDEX_PER_STREAM); | 
|  | else if (rs_extract_rate(lq_sta->last_rate_n_flags) >= | 
|  | IWL_RATE_MIMO2_6M_PLCP) | 
|  | rate_idx = rate_idx + MCS_INDEX_PER_STREAM; | 
|  | info->control.rates[0].flags = IEEE80211_TX_RC_MCS; | 
|  | if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK) | 
|  | info->control.rates[0].flags |= IEEE80211_TX_RC_SHORT_GI; | 
|  | if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK) | 
|  | info->control.rates[0].flags |= IEEE80211_TX_RC_DUP_DATA; | 
|  | if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK) | 
|  | info->control.rates[0].flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; | 
|  | if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK) | 
|  | info->control.rates[0].flags |= IEEE80211_TX_RC_GREEN_FIELD; | 
|  | } else { | 
|  | /* Check for invalid rates */ | 
|  | if ((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT_LEGACY) || | 
|  | ((sband->band == IEEE80211_BAND_5GHZ) && | 
|  | (rate_idx < IWL_FIRST_OFDM_RATE))) | 
|  | rate_idx = rate_lowest_index(sband, sta); | 
|  | /* On valid 5 GHz rate, adjust index */ | 
|  | else if (sband->band == IEEE80211_BAND_5GHZ) | 
|  | rate_idx -= IWL_FIRST_OFDM_RATE; | 
|  | info->control.rates[0].flags = 0; | 
|  | } | 
|  | info->control.rates[0].idx = rate_idx; | 
|  |  | 
|  | } | 
|  |  | 
|  | static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta, | 
|  | gfp_t gfp) | 
|  | { | 
|  | struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv; | 
|  | struct iwl_priv *priv; | 
|  |  | 
|  | priv = (struct iwl_priv *)priv_rate; | 
|  | IWL_DEBUG_RATE(priv, "create station rate scale window\n"); | 
|  |  | 
|  | return &sta_priv->lq_sta; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called after adding a new station to initialize rate scaling | 
|  | */ | 
|  | void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id) | 
|  | { | 
|  | int i, j; | 
|  | struct ieee80211_hw *hw = priv->hw; | 
|  | struct ieee80211_conf *conf = &priv->hw->conf; | 
|  | struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; | 
|  | struct iwl_station_priv *sta_priv; | 
|  | struct iwl_lq_sta *lq_sta; | 
|  | struct ieee80211_supported_band *sband; | 
|  |  | 
|  | sta_priv = (struct iwl_station_priv *) sta->drv_priv; | 
|  | lq_sta = &sta_priv->lq_sta; | 
|  | sband = hw->wiphy->bands[conf->channel->band]; | 
|  |  | 
|  |  | 
|  | lq_sta->lq.sta_id = sta_id; | 
|  |  | 
|  | for (j = 0; j < LQ_SIZE; j++) | 
|  | for (i = 0; i < IWL_RATE_COUNT; i++) | 
|  | rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); | 
|  |  | 
|  | lq_sta->flush_timer = 0; | 
|  | lq_sta->supp_rates = sta->supp_rates[sband->band]; | 
|  | for (j = 0; j < LQ_SIZE; j++) | 
|  | for (i = 0; i < IWL_RATE_COUNT; i++) | 
|  | rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init for station %d ***\n", | 
|  | sta_id); | 
|  | /* TODO: what is a good starting rate for STA? About middle? Maybe not | 
|  | * the lowest or the highest rate.. Could consider using RSSI from | 
|  | * previous packets? Need to have IEEE 802.1X auth succeed immediately | 
|  | * after assoc.. */ | 
|  |  | 
|  | lq_sta->is_dup = 0; | 
|  | lq_sta->max_rate_idx = -1; | 
|  | lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX; | 
|  | lq_sta->is_green = rs_use_green(sta); | 
|  | lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000); | 
|  | lq_sta->band = priv->band; | 
|  | /* | 
|  | * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), | 
|  | * supp_rates[] does not; shift to convert format, force 9 MBits off. | 
|  | */ | 
|  | lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1; | 
|  | lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1; | 
|  | lq_sta->active_siso_rate &= ~((u16)0x2); | 
|  | lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; | 
|  |  | 
|  | /* Same here */ | 
|  | lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1; | 
|  | lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1; | 
|  | lq_sta->active_mimo2_rate &= ~((u16)0x2); | 
|  | lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; | 
|  |  | 
|  | lq_sta->active_mimo3_rate = ht_cap->mcs.rx_mask[2] << 1; | 
|  | lq_sta->active_mimo3_rate |= ht_cap->mcs.rx_mask[2] & 0x1; | 
|  | lq_sta->active_mimo3_rate &= ~((u16)0x2); | 
|  | lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n", | 
|  | lq_sta->active_siso_rate, | 
|  | lq_sta->active_mimo2_rate, | 
|  | lq_sta->active_mimo3_rate); | 
|  |  | 
|  | /* These values will be overridden later */ | 
|  | lq_sta->lq.general_params.single_stream_ant_msk = | 
|  | first_antenna(priv->hw_params.valid_tx_ant); | 
|  | lq_sta->lq.general_params.dual_stream_ant_msk = | 
|  | priv->hw_params.valid_tx_ant & | 
|  | ~first_antenna(priv->hw_params.valid_tx_ant); | 
|  | if (!lq_sta->lq.general_params.dual_stream_ant_msk) { | 
|  | lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB; | 
|  | } else if (num_of_ant(priv->hw_params.valid_tx_ant) == 2) { | 
|  | lq_sta->lq.general_params.dual_stream_ant_msk = | 
|  | priv->hw_params.valid_tx_ant; | 
|  | } | 
|  |  | 
|  | /* as default allow aggregation for all tids */ | 
|  | lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; | 
|  | lq_sta->drv = priv; | 
|  |  | 
|  | /* Set last_txrate_idx to lowest rate */ | 
|  | lq_sta->last_txrate_idx = rate_lowest_index(sband, sta); | 
|  | if (sband->band == IEEE80211_BAND_5GHZ) | 
|  | lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; | 
|  | lq_sta->is_agg = 0; | 
|  |  | 
|  | priv->dbg_fixed_rate = 0; | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | lq_sta->dbg_fixed_rate = 0; | 
|  | #endif | 
|  |  | 
|  | rs_initialize_lq(priv, conf, sta, lq_sta); | 
|  | } | 
|  |  | 
|  | static void rs_fill_link_cmd(struct iwl_priv *priv, | 
|  | struct iwl_lq_sta *lq_sta, u32 new_rate) | 
|  | { | 
|  | struct iwl_scale_tbl_info tbl_type; | 
|  | int index = 0; | 
|  | int rate_idx; | 
|  | int repeat_rate = 0; | 
|  | u8 ant_toggle_cnt = 0; | 
|  | u8 use_ht_possible = 1; | 
|  | u8 valid_tx_ant = 0; | 
|  | struct iwl_station_priv *sta_priv = | 
|  | container_of(lq_sta, struct iwl_station_priv, lq_sta); | 
|  | struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq; | 
|  |  | 
|  | /* Override starting rate (index 0) if needed for debug purposes */ | 
|  | rs_dbgfs_set_mcs(lq_sta, &new_rate, index); | 
|  |  | 
|  | /* Interpret new_rate (rate_n_flags) */ | 
|  | rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, | 
|  | &tbl_type, &rate_idx); | 
|  |  | 
|  | if (priv && priv->bt_full_concurrent) { | 
|  | /* 1x1 only */ | 
|  | tbl_type.ant_type = | 
|  | first_antenna(priv->hw_params.valid_tx_ant); | 
|  | } | 
|  |  | 
|  | /* How many times should we repeat the initial rate? */ | 
|  | if (is_legacy(tbl_type.lq_type)) { | 
|  | ant_toggle_cnt = 1; | 
|  | repeat_rate = IWL_NUMBER_TRY; | 
|  | } else { | 
|  | repeat_rate = min(IWL_HT_NUMBER_TRY, | 
|  | LINK_QUAL_AGG_DISABLE_START_DEF - 1); | 
|  | } | 
|  |  | 
|  | lq_cmd->general_params.mimo_delimiter = | 
|  | is_mimo(tbl_type.lq_type) ? 1 : 0; | 
|  |  | 
|  | /* Fill 1st table entry (index 0) */ | 
|  | lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); | 
|  |  | 
|  | if (num_of_ant(tbl_type.ant_type) == 1) { | 
|  | lq_cmd->general_params.single_stream_ant_msk = | 
|  | tbl_type.ant_type; | 
|  | } else if (num_of_ant(tbl_type.ant_type) == 2) { | 
|  | lq_cmd->general_params.dual_stream_ant_msk = | 
|  | tbl_type.ant_type; | 
|  | } /* otherwise we don't modify the existing value */ | 
|  |  | 
|  | index++; | 
|  | repeat_rate--; | 
|  | if (priv) { | 
|  | if (priv->bt_full_concurrent) | 
|  | valid_tx_ant = ANT_A; | 
|  | else | 
|  | valid_tx_ant = priv->hw_params.valid_tx_ant; | 
|  | } | 
|  |  | 
|  | /* Fill rest of rate table */ | 
|  | while (index < LINK_QUAL_MAX_RETRY_NUM) { | 
|  | /* Repeat initial/next rate. | 
|  | * For legacy IWL_NUMBER_TRY == 1, this loop will not execute. | 
|  | * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ | 
|  | while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { | 
|  | if (is_legacy(tbl_type.lq_type)) { | 
|  | if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) | 
|  | ant_toggle_cnt++; | 
|  | else if (priv && | 
|  | rs_toggle_antenna(valid_tx_ant, | 
|  | &new_rate, &tbl_type)) | 
|  | ant_toggle_cnt = 1; | 
|  | } | 
|  |  | 
|  | /* Override next rate if needed for debug purposes */ | 
|  | rs_dbgfs_set_mcs(lq_sta, &new_rate, index); | 
|  |  | 
|  | /* Fill next table entry */ | 
|  | lq_cmd->rs_table[index].rate_n_flags = | 
|  | cpu_to_le32(new_rate); | 
|  | repeat_rate--; | 
|  | index++; | 
|  | } | 
|  |  | 
|  | rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, | 
|  | &rate_idx); | 
|  |  | 
|  | if (priv && priv->bt_full_concurrent) { | 
|  | /* 1x1 only */ | 
|  | tbl_type.ant_type = | 
|  | first_antenna(priv->hw_params.valid_tx_ant); | 
|  | } | 
|  |  | 
|  | /* Indicate to uCode which entries might be MIMO. | 
|  | * If initial rate was MIMO, this will finally end up | 
|  | * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ | 
|  | if (is_mimo(tbl_type.lq_type)) | 
|  | lq_cmd->general_params.mimo_delimiter = index; | 
|  |  | 
|  | /* Get next rate */ | 
|  | new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, | 
|  | use_ht_possible); | 
|  |  | 
|  | /* How many times should we repeat the next rate? */ | 
|  | if (is_legacy(tbl_type.lq_type)) { | 
|  | if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) | 
|  | ant_toggle_cnt++; | 
|  | else if (priv && | 
|  | rs_toggle_antenna(valid_tx_ant, | 
|  | &new_rate, &tbl_type)) | 
|  | ant_toggle_cnt = 1; | 
|  |  | 
|  | repeat_rate = IWL_NUMBER_TRY; | 
|  | } else { | 
|  | repeat_rate = IWL_HT_NUMBER_TRY; | 
|  | } | 
|  |  | 
|  | /* Don't allow HT rates after next pass. | 
|  | * rs_get_lower_rate() will change type to LQ_A or LQ_G. */ | 
|  | use_ht_possible = 0; | 
|  |  | 
|  | /* Override next rate if needed for debug purposes */ | 
|  | rs_dbgfs_set_mcs(lq_sta, &new_rate, index); | 
|  |  | 
|  | /* Fill next table entry */ | 
|  | lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); | 
|  |  | 
|  | index++; | 
|  | repeat_rate--; | 
|  | } | 
|  |  | 
|  | lq_cmd->agg_params.agg_frame_cnt_limit = | 
|  | sta_priv->max_agg_bufsize ?: LINK_QUAL_AGG_FRAME_LIMIT_DEF; | 
|  | lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; | 
|  |  | 
|  | lq_cmd->agg_params.agg_time_limit = | 
|  | cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); | 
|  | /* | 
|  | * overwrite if needed, pass aggregation time limit | 
|  | * to uCode in uSec | 
|  | */ | 
|  | if (priv && priv->cfg->bt_params && | 
|  | priv->cfg->bt_params->agg_time_limit && | 
|  | priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) | 
|  | lq_cmd->agg_params.agg_time_limit = | 
|  | cpu_to_le16(priv->cfg->bt_params->agg_time_limit); | 
|  | } | 
|  |  | 
|  | static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) | 
|  | { | 
|  | return hw->priv; | 
|  | } | 
|  | /* rate scale requires free function to be implemented */ | 
|  | static void rs_free(void *priv_rate) | 
|  | { | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta, | 
|  | void *priv_sta) | 
|  | { | 
|  | struct iwl_priv *priv __maybe_unused = priv_r; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "enter\n"); | 
|  | IWL_DEBUG_RATE(priv, "leave\n"); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | static int open_file_generic(struct inode *inode, struct file *file) | 
|  | { | 
|  | file->private_data = inode->i_private; | 
|  | return 0; | 
|  | } | 
|  | static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, | 
|  | u32 *rate_n_flags, int index) | 
|  | { | 
|  | struct iwl_priv *priv; | 
|  | u8 valid_tx_ant; | 
|  | u8 ant_sel_tx; | 
|  |  | 
|  | priv = lq_sta->drv; | 
|  | valid_tx_ant = priv->hw_params.valid_tx_ant; | 
|  | if (lq_sta->dbg_fixed_rate) { | 
|  | ant_sel_tx = | 
|  | ((lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK) | 
|  | >> RATE_MCS_ANT_POS); | 
|  | if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) { | 
|  | *rate_n_flags = lq_sta->dbg_fixed_rate; | 
|  | IWL_DEBUG_RATE(priv, "Fixed rate ON\n"); | 
|  | } else { | 
|  | lq_sta->dbg_fixed_rate = 0; | 
|  | priv->dbg_fixed_rate = 0; | 
|  | IWL_ERR(priv, | 
|  | "Invalid antenna selection 0x%X, Valid is 0x%X\n", | 
|  | ant_sel_tx, valid_tx_ant); | 
|  | IWL_DEBUG_RATE(priv, "Fixed rate OFF\n"); | 
|  | } | 
|  | } else { | 
|  | IWL_DEBUG_RATE(priv, "Fixed rate OFF\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, | 
|  | const char __user *user_buf, size_t count, loff_t *ppos) | 
|  | { | 
|  | struct iwl_lq_sta *lq_sta = file->private_data; | 
|  | struct iwl_priv *priv; | 
|  | char buf[64]; | 
|  | size_t buf_size; | 
|  | u32 parsed_rate; | 
|  |  | 
|  |  | 
|  | priv = lq_sta->drv; | 
|  | memset(buf, 0, sizeof(buf)); | 
|  | buf_size = min(count, sizeof(buf) -  1); | 
|  | if (copy_from_user(buf, user_buf, buf_size)) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (sscanf(buf, "%x", &parsed_rate) == 1) | 
|  | priv->dbg_fixed_rate = lq_sta->dbg_fixed_rate = parsed_rate; | 
|  | else | 
|  | priv->dbg_fixed_rate = lq_sta->dbg_fixed_rate = 0; | 
|  |  | 
|  | rs_program_fix_rate(priv, lq_sta); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, | 
|  | char __user *user_buf, size_t count, loff_t *ppos) | 
|  | { | 
|  | char *buff; | 
|  | int desc = 0; | 
|  | int i = 0; | 
|  | int index = 0; | 
|  | ssize_t ret; | 
|  |  | 
|  | struct iwl_lq_sta *lq_sta = file->private_data; | 
|  | struct iwl_priv *priv; | 
|  | struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); | 
|  |  | 
|  | priv = lq_sta->drv; | 
|  | buff = kmalloc(1024, GFP_KERNEL); | 
|  | if (!buff) | 
|  | return -ENOMEM; | 
|  |  | 
|  | desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); | 
|  | desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", | 
|  | lq_sta->total_failed, lq_sta->total_success, | 
|  | lq_sta->active_legacy_rate); | 
|  | desc += sprintf(buff+desc, "fixed rate 0x%X\n", | 
|  | priv->dbg_fixed_rate); | 
|  | desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n", | 
|  | (priv->hw_params.valid_tx_ant & ANT_A) ? "ANT_A," : "", | 
|  | (priv->hw_params.valid_tx_ant & ANT_B) ? "ANT_B," : "", | 
|  | (priv->hw_params.valid_tx_ant & ANT_C) ? "ANT_C" : ""); | 
|  | desc += sprintf(buff+desc, "lq type %s\n", | 
|  | (is_legacy(tbl->lq_type)) ? "legacy" : "HT"); | 
|  | if (is_Ht(tbl->lq_type)) { | 
|  | desc += sprintf(buff+desc, " %s", | 
|  | (is_siso(tbl->lq_type)) ? "SISO" : | 
|  | ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3")); | 
|  | desc += sprintf(buff+desc, " %s", | 
|  | (tbl->is_ht40) ? "40MHz" : "20MHz"); | 
|  | desc += sprintf(buff+desc, " %s %s %s\n", (tbl->is_SGI) ? "SGI" : "", | 
|  | (lq_sta->is_green) ? "GF enabled" : "", | 
|  | (lq_sta->is_agg) ? "AGG on" : ""); | 
|  | } | 
|  | desc += sprintf(buff+desc, "last tx rate=0x%X\n", | 
|  | lq_sta->last_rate_n_flags); | 
|  | desc += sprintf(buff+desc, "general:" | 
|  | "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", | 
|  | lq_sta->lq.general_params.flags, | 
|  | lq_sta->lq.general_params.mimo_delimiter, | 
|  | lq_sta->lq.general_params.single_stream_ant_msk, | 
|  | lq_sta->lq.general_params.dual_stream_ant_msk); | 
|  |  | 
|  | desc += sprintf(buff+desc, "agg:" | 
|  | "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", | 
|  | le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit), | 
|  | lq_sta->lq.agg_params.agg_dis_start_th, | 
|  | lq_sta->lq.agg_params.agg_frame_cnt_limit); | 
|  |  | 
|  | desc += sprintf(buff+desc, | 
|  | "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", | 
|  | lq_sta->lq.general_params.start_rate_index[0], | 
|  | lq_sta->lq.general_params.start_rate_index[1], | 
|  | lq_sta->lq.general_params.start_rate_index[2], | 
|  | lq_sta->lq.general_params.start_rate_index[3]); | 
|  |  | 
|  | for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { | 
|  | index = iwl_hwrate_to_plcp_idx( | 
|  | le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags)); | 
|  | if (is_legacy(tbl->lq_type)) { | 
|  | desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n", | 
|  | i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags), | 
|  | iwl_rate_mcs[index].mbps); | 
|  | } else { | 
|  | desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps (%s)\n", | 
|  | i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags), | 
|  | iwl_rate_mcs[index].mbps, iwl_rate_mcs[index].mcs); | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); | 
|  | kfree(buff); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct file_operations rs_sta_dbgfs_scale_table_ops = { | 
|  | .write = rs_sta_dbgfs_scale_table_write, | 
|  | .read = rs_sta_dbgfs_scale_table_read, | 
|  | .open = open_file_generic, | 
|  | .llseek = default_llseek, | 
|  | }; | 
|  | static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, | 
|  | char __user *user_buf, size_t count, loff_t *ppos) | 
|  | { | 
|  | char *buff; | 
|  | int desc = 0; | 
|  | int i, j; | 
|  | ssize_t ret; | 
|  |  | 
|  | struct iwl_lq_sta *lq_sta = file->private_data; | 
|  |  | 
|  | buff = kmalloc(1024, GFP_KERNEL); | 
|  | if (!buff) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (i = 0; i < LQ_SIZE; i++) { | 
|  | desc += sprintf(buff+desc, | 
|  | "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n" | 
|  | "rate=0x%X\n", | 
|  | lq_sta->active_tbl == i ? "*" : "x", | 
|  | lq_sta->lq_info[i].lq_type, | 
|  | lq_sta->lq_info[i].is_SGI, | 
|  | lq_sta->lq_info[i].is_ht40, | 
|  | lq_sta->lq_info[i].is_dup, | 
|  | lq_sta->is_green, | 
|  | lq_sta->lq_info[i].current_rate); | 
|  | for (j = 0; j < IWL_RATE_COUNT; j++) { | 
|  | desc += sprintf(buff+desc, | 
|  | "counter=%d success=%d %%=%d\n", | 
|  | lq_sta->lq_info[i].win[j].counter, | 
|  | lq_sta->lq_info[i].win[j].success_counter, | 
|  | lq_sta->lq_info[i].win[j].success_ratio); | 
|  | } | 
|  | } | 
|  | ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); | 
|  | kfree(buff); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct file_operations rs_sta_dbgfs_stats_table_ops = { | 
|  | .read = rs_sta_dbgfs_stats_table_read, | 
|  | .open = open_file_generic, | 
|  | .llseek = default_llseek, | 
|  | }; | 
|  |  | 
|  | static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file, | 
|  | char __user *user_buf, size_t count, loff_t *ppos) | 
|  | { | 
|  | struct iwl_lq_sta *lq_sta = file->private_data; | 
|  | struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl]; | 
|  | char buff[120]; | 
|  | int desc = 0; | 
|  |  | 
|  | if (is_Ht(tbl->lq_type)) | 
|  | desc += sprintf(buff+desc, | 
|  | "Bit Rate= %d Mb/s\n", | 
|  | tbl->expected_tpt[lq_sta->last_txrate_idx]); | 
|  | else | 
|  | desc += sprintf(buff+desc, | 
|  | "Bit Rate= %d Mb/s\n", | 
|  | iwl_rates[lq_sta->last_txrate_idx].ieee >> 1); | 
|  |  | 
|  | return simple_read_from_buffer(user_buf, count, ppos, buff, desc); | 
|  | } | 
|  |  | 
|  | static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = { | 
|  | .read = rs_sta_dbgfs_rate_scale_data_read, | 
|  | .open = open_file_generic, | 
|  | .llseek = default_llseek, | 
|  | }; | 
|  |  | 
|  | static void rs_add_debugfs(void *priv, void *priv_sta, | 
|  | struct dentry *dir) | 
|  | { | 
|  | struct iwl_lq_sta *lq_sta = priv_sta; | 
|  | lq_sta->rs_sta_dbgfs_scale_table_file = | 
|  | debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir, | 
|  | lq_sta, &rs_sta_dbgfs_scale_table_ops); | 
|  | lq_sta->rs_sta_dbgfs_stats_table_file = | 
|  | debugfs_create_file("rate_stats_table", S_IRUSR, dir, | 
|  | lq_sta, &rs_sta_dbgfs_stats_table_ops); | 
|  | lq_sta->rs_sta_dbgfs_rate_scale_data_file = | 
|  | debugfs_create_file("rate_scale_data", S_IRUSR, dir, | 
|  | lq_sta, &rs_sta_dbgfs_rate_scale_data_ops); | 
|  | lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = | 
|  | debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir, | 
|  | &lq_sta->tx_agg_tid_en); | 
|  |  | 
|  | } | 
|  |  | 
|  | static void rs_remove_debugfs(void *priv, void *priv_sta) | 
|  | { | 
|  | struct iwl_lq_sta *lq_sta = priv_sta; | 
|  | debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); | 
|  | debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); | 
|  | debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file); | 
|  | debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Initialization of rate scaling information is done by driver after | 
|  | * the station is added. Since mac80211 calls this function before a | 
|  | * station is added we ignore it. | 
|  | */ | 
|  | static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband, | 
|  | struct ieee80211_sta *sta, void *priv_sta) | 
|  | { | 
|  | } | 
|  | static struct rate_control_ops rs_ops = { | 
|  | .module = NULL, | 
|  | .name = RS_NAME, | 
|  | .tx_status = rs_tx_status, | 
|  | .get_rate = rs_get_rate, | 
|  | .rate_init = rs_rate_init_stub, | 
|  | .alloc = rs_alloc, | 
|  | .free = rs_free, | 
|  | .alloc_sta = rs_alloc_sta, | 
|  | .free_sta = rs_free_sta, | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | .add_sta_debugfs = rs_add_debugfs, | 
|  | .remove_sta_debugfs = rs_remove_debugfs, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | int iwlagn_rate_control_register(void) | 
|  | { | 
|  | return ieee80211_rate_control_register(&rs_ops); | 
|  | } | 
|  |  | 
|  | void iwlagn_rate_control_unregister(void) | 
|  | { | 
|  | ieee80211_rate_control_unregister(&rs_ops); | 
|  | } | 
|  |  |