|  | /* | 
|  | * This file contains the major functions in WLAN | 
|  | * driver. It includes init, exit, open, close and main | 
|  | * thread etc.. | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/kfifo.h> | 
|  | #include <linux/slab.h> | 
|  | #include <net/cfg80211.h> | 
|  |  | 
|  | #include "host.h" | 
|  | #include "decl.h" | 
|  | #include "dev.h" | 
|  | #include "cfg.h" | 
|  | #include "debugfs.h" | 
|  | #include "cmd.h" | 
|  |  | 
|  | #define DRIVER_RELEASE_VERSION "323.p0" | 
|  | const char lbs_driver_version[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION | 
|  | #ifdef  DEBUG | 
|  | "-dbg" | 
|  | #endif | 
|  | ""; | 
|  |  | 
|  |  | 
|  | /* Module parameters */ | 
|  | unsigned int lbs_debug; | 
|  | EXPORT_SYMBOL_GPL(lbs_debug); | 
|  | module_param_named(libertas_debug, lbs_debug, int, 0644); | 
|  |  | 
|  | unsigned int lbs_disablemesh; | 
|  | EXPORT_SYMBOL_GPL(lbs_disablemesh); | 
|  | module_param_named(libertas_disablemesh, lbs_disablemesh, int, 0644); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * This global structure is used to send the confirm_sleep command as | 
|  | * fast as possible down to the firmware. | 
|  | */ | 
|  | struct cmd_confirm_sleep confirm_sleep; | 
|  |  | 
|  |  | 
|  | /* | 
|  | * the table to keep region code | 
|  | */ | 
|  | u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE] = | 
|  | { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 }; | 
|  |  | 
|  | /* | 
|  | * FW rate table.  FW refers to rates by their index in this table, not by the | 
|  | * rate value itself.  Values of 0x00 are | 
|  | * reserved positions. | 
|  | */ | 
|  | static u8 fw_data_rates[MAX_RATES] = | 
|  | { 0x02, 0x04, 0x0B, 0x16, 0x00, 0x0C, 0x12, | 
|  | 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x00 | 
|  | }; | 
|  |  | 
|  | /** | 
|  | *  lbs_fw_index_to_data_rate - use index to get the data rate | 
|  | * | 
|  | *  @idx:	The index of data rate | 
|  | *  returns:	data rate or 0 | 
|  | */ | 
|  | u32 lbs_fw_index_to_data_rate(u8 idx) | 
|  | { | 
|  | if (idx >= sizeof(fw_data_rates)) | 
|  | idx = 0; | 
|  | return fw_data_rates[idx]; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  lbs_data_rate_to_fw_index - use rate to get the index | 
|  | * | 
|  | *  @rate:	data rate | 
|  | *  returns:	index or 0 | 
|  | */ | 
|  | u8 lbs_data_rate_to_fw_index(u32 rate) | 
|  | { | 
|  | u8 i; | 
|  |  | 
|  | if (!rate) | 
|  | return 0; | 
|  |  | 
|  | for (i = 0; i < sizeof(fw_data_rates); i++) { | 
|  | if (rate == fw_data_rates[i]) | 
|  | return i; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | *  lbs_dev_open - open the ethX interface | 
|  | * | 
|  | *  @dev:	A pointer to &net_device structure | 
|  | *  returns:	0 or -EBUSY if monitor mode active | 
|  | */ | 
|  | static int lbs_dev_open(struct net_device *dev) | 
|  | { | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_NET); | 
|  |  | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | priv->stopping = false; | 
|  |  | 
|  | if (priv->connect_status == LBS_CONNECTED) | 
|  | netif_carrier_on(dev); | 
|  | else | 
|  | netif_carrier_off(dev); | 
|  |  | 
|  | if (!priv->tx_pending_len) | 
|  | netif_wake_queue(dev); | 
|  |  | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  | lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  lbs_eth_stop - close the ethX interface | 
|  | * | 
|  | *  @dev:	A pointer to &net_device structure | 
|  | *  returns:	0 | 
|  | */ | 
|  | static int lbs_eth_stop(struct net_device *dev) | 
|  | { | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_NET); | 
|  |  | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | priv->stopping = true; | 
|  | netif_stop_queue(dev); | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  |  | 
|  | schedule_work(&priv->mcast_work); | 
|  | cancel_delayed_work_sync(&priv->scan_work); | 
|  | if (priv->scan_req) { | 
|  | cfg80211_scan_done(priv->scan_req, false); | 
|  | priv->scan_req = NULL; | 
|  | } | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_NET); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void lbs_host_to_card_done(struct lbs_private *priv) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_THREAD); | 
|  |  | 
|  | spin_lock_irqsave(&priv->driver_lock, flags); | 
|  |  | 
|  | priv->dnld_sent = DNLD_RES_RECEIVED; | 
|  |  | 
|  | /* Wake main thread if commands are pending */ | 
|  | if (!priv->cur_cmd || priv->tx_pending_len > 0) { | 
|  | if (!priv->wakeup_dev_required) | 
|  | wake_up_interruptible(&priv->waitq); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->driver_lock, flags); | 
|  | lbs_deb_leave(LBS_DEB_THREAD); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_host_to_card_done); | 
|  |  | 
|  | int lbs_set_mac_address(struct net_device *dev, void *addr) | 
|  | { | 
|  | int ret = 0; | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  | struct sockaddr *phwaddr = addr; | 
|  | struct cmd_ds_802_11_mac_address cmd; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_NET); | 
|  |  | 
|  | /* In case it was called from the mesh device */ | 
|  | dev = priv->dev; | 
|  |  | 
|  | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | 
|  | cmd.action = cpu_to_le16(CMD_ACT_SET); | 
|  | memcpy(cmd.macadd, phwaddr->sa_data, ETH_ALEN); | 
|  |  | 
|  | ret = lbs_cmd_with_response(priv, CMD_802_11_MAC_ADDRESS, &cmd); | 
|  | if (ret) { | 
|  | lbs_deb_net("set MAC address failed\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | memcpy(priv->current_addr, phwaddr->sa_data, ETH_ALEN); | 
|  | memcpy(dev->dev_addr, phwaddr->sa_data, ETH_ALEN); | 
|  | if (priv->mesh_dev) | 
|  | memcpy(priv->mesh_dev->dev_addr, phwaddr->sa_data, ETH_ALEN); | 
|  |  | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline int mac_in_list(unsigned char *list, int list_len, | 
|  | unsigned char *mac) | 
|  | { | 
|  | while (list_len) { | 
|  | if (!memcmp(list, mac, ETH_ALEN)) | 
|  | return 1; | 
|  | list += ETH_ALEN; | 
|  | list_len--; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int lbs_add_mcast_addrs(struct cmd_ds_mac_multicast_adr *cmd, | 
|  | struct net_device *dev, int nr_addrs) | 
|  | { | 
|  | int i = nr_addrs; | 
|  | struct netdev_hw_addr *ha; | 
|  | int cnt; | 
|  |  | 
|  | if ((dev->flags & (IFF_UP|IFF_MULTICAST)) != (IFF_UP|IFF_MULTICAST)) | 
|  | return nr_addrs; | 
|  |  | 
|  | netif_addr_lock_bh(dev); | 
|  | cnt = netdev_mc_count(dev); | 
|  | netdev_for_each_mc_addr(ha, dev) { | 
|  | if (mac_in_list(cmd->maclist, nr_addrs, ha->addr)) { | 
|  | lbs_deb_net("mcast address %s:%pM skipped\n", dev->name, | 
|  | ha->addr); | 
|  | cnt--; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (i == MRVDRV_MAX_MULTICAST_LIST_SIZE) | 
|  | break; | 
|  | memcpy(&cmd->maclist[6*i], ha->addr, ETH_ALEN); | 
|  | lbs_deb_net("mcast address %s:%pM added to filter\n", dev->name, | 
|  | ha->addr); | 
|  | i++; | 
|  | cnt--; | 
|  | } | 
|  | netif_addr_unlock_bh(dev); | 
|  | if (cnt) | 
|  | return -EOVERFLOW; | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static void lbs_set_mcast_worker(struct work_struct *work) | 
|  | { | 
|  | struct lbs_private *priv = container_of(work, struct lbs_private, mcast_work); | 
|  | struct cmd_ds_mac_multicast_adr mcast_cmd; | 
|  | int dev_flags; | 
|  | int nr_addrs; | 
|  | int old_mac_control = priv->mac_control; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_NET); | 
|  |  | 
|  | dev_flags = priv->dev->flags; | 
|  | if (priv->mesh_dev) | 
|  | dev_flags |= priv->mesh_dev->flags; | 
|  |  | 
|  | if (dev_flags & IFF_PROMISC) { | 
|  | priv->mac_control |= CMD_ACT_MAC_PROMISCUOUS_ENABLE; | 
|  | priv->mac_control &= ~(CMD_ACT_MAC_ALL_MULTICAST_ENABLE | | 
|  | CMD_ACT_MAC_MULTICAST_ENABLE); | 
|  | goto out_set_mac_control; | 
|  | } else if (dev_flags & IFF_ALLMULTI) { | 
|  | do_allmulti: | 
|  | priv->mac_control |= CMD_ACT_MAC_ALL_MULTICAST_ENABLE; | 
|  | priv->mac_control &= ~(CMD_ACT_MAC_PROMISCUOUS_ENABLE | | 
|  | CMD_ACT_MAC_MULTICAST_ENABLE); | 
|  | goto out_set_mac_control; | 
|  | } | 
|  |  | 
|  | /* Once for priv->dev, again for priv->mesh_dev if it exists */ | 
|  | nr_addrs = lbs_add_mcast_addrs(&mcast_cmd, priv->dev, 0); | 
|  | if (nr_addrs >= 0 && priv->mesh_dev) | 
|  | nr_addrs = lbs_add_mcast_addrs(&mcast_cmd, priv->mesh_dev, nr_addrs); | 
|  | if (nr_addrs < 0) | 
|  | goto do_allmulti; | 
|  |  | 
|  | if (nr_addrs) { | 
|  | int size = offsetof(struct cmd_ds_mac_multicast_adr, | 
|  | maclist[6*nr_addrs]); | 
|  |  | 
|  | mcast_cmd.action = cpu_to_le16(CMD_ACT_SET); | 
|  | mcast_cmd.hdr.size = cpu_to_le16(size); | 
|  | mcast_cmd.nr_of_adrs = cpu_to_le16(nr_addrs); | 
|  |  | 
|  | lbs_cmd_async(priv, CMD_MAC_MULTICAST_ADR, &mcast_cmd.hdr, size); | 
|  |  | 
|  | priv->mac_control |= CMD_ACT_MAC_MULTICAST_ENABLE; | 
|  | } else | 
|  | priv->mac_control &= ~CMD_ACT_MAC_MULTICAST_ENABLE; | 
|  |  | 
|  | priv->mac_control &= ~(CMD_ACT_MAC_PROMISCUOUS_ENABLE | | 
|  | CMD_ACT_MAC_ALL_MULTICAST_ENABLE); | 
|  | out_set_mac_control: | 
|  | if (priv->mac_control != old_mac_control) | 
|  | lbs_set_mac_control(priv); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_NET); | 
|  | } | 
|  |  | 
|  | void lbs_set_multicast_list(struct net_device *dev) | 
|  | { | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  |  | 
|  | schedule_work(&priv->mcast_work); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  lbs_thread - handles the major jobs in the LBS driver. | 
|  | *  It handles all events generated by firmware, RX data received | 
|  | *  from firmware and TX data sent from kernel. | 
|  | * | 
|  | *  @data:	A pointer to &lbs_thread structure | 
|  | *  returns:	0 | 
|  | */ | 
|  | static int lbs_thread(void *data) | 
|  | { | 
|  | struct net_device *dev = data; | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  | wait_queue_t wait; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_THREAD); | 
|  |  | 
|  | init_waitqueue_entry(&wait, current); | 
|  |  | 
|  | for (;;) { | 
|  | int shouldsleep; | 
|  | u8 resp_idx; | 
|  |  | 
|  | lbs_deb_thread("1: currenttxskb %p, dnld_sent %d\n", | 
|  | priv->currenttxskb, priv->dnld_sent); | 
|  |  | 
|  | add_wait_queue(&priv->waitq, &wait); | 
|  | set_current_state(TASK_INTERRUPTIBLE); | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  |  | 
|  | if (kthread_should_stop()) | 
|  | shouldsleep = 0;	/* Bye */ | 
|  | else if (priv->surpriseremoved) | 
|  | shouldsleep = 1;	/* We need to wait until we're _told_ to die */ | 
|  | else if (priv->psstate == PS_STATE_SLEEP) | 
|  | shouldsleep = 1;	/* Sleep mode. Nothing we can do till it wakes */ | 
|  | else if (priv->cmd_timed_out) | 
|  | shouldsleep = 0;	/* Command timed out. Recover */ | 
|  | else if (!priv->fw_ready) | 
|  | shouldsleep = 1;	/* Firmware not ready. We're waiting for it */ | 
|  | else if (priv->dnld_sent) | 
|  | shouldsleep = 1;	/* Something is en route to the device already */ | 
|  | else if (priv->tx_pending_len > 0) | 
|  | shouldsleep = 0;	/* We've a packet to send */ | 
|  | else if (priv->resp_len[priv->resp_idx]) | 
|  | shouldsleep = 0;	/* We have a command response */ | 
|  | else if (priv->cur_cmd) | 
|  | shouldsleep = 1;	/* Can't send a command; one already running */ | 
|  | else if (!list_empty(&priv->cmdpendingq) && | 
|  | !(priv->wakeup_dev_required)) | 
|  | shouldsleep = 0;	/* We have a command to send */ | 
|  | else if (kfifo_len(&priv->event_fifo)) | 
|  | shouldsleep = 0;	/* We have an event to process */ | 
|  | else | 
|  | shouldsleep = 1;	/* No command */ | 
|  |  | 
|  | if (shouldsleep) { | 
|  | lbs_deb_thread("sleeping, connect_status %d, " | 
|  | "psmode %d, psstate %d\n", | 
|  | priv->connect_status, | 
|  | priv->psmode, priv->psstate); | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  | schedule(); | 
|  | } else | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  |  | 
|  | lbs_deb_thread("2: currenttxskb %p, dnld_send %d\n", | 
|  | priv->currenttxskb, priv->dnld_sent); | 
|  |  | 
|  | set_current_state(TASK_RUNNING); | 
|  | remove_wait_queue(&priv->waitq, &wait); | 
|  |  | 
|  | lbs_deb_thread("3: currenttxskb %p, dnld_sent %d\n", | 
|  | priv->currenttxskb, priv->dnld_sent); | 
|  |  | 
|  | if (kthread_should_stop()) { | 
|  | lbs_deb_thread("break from main thread\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (priv->surpriseremoved) { | 
|  | lbs_deb_thread("adapter removed; waiting to die...\n"); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n", | 
|  | priv->currenttxskb, priv->dnld_sent); | 
|  |  | 
|  | /* Process any pending command response */ | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | resp_idx = priv->resp_idx; | 
|  | if (priv->resp_len[resp_idx]) { | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  | lbs_process_command_response(priv, | 
|  | priv->resp_buf[resp_idx], | 
|  | priv->resp_len[resp_idx]); | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | priv->resp_len[resp_idx] = 0; | 
|  | } | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  |  | 
|  | /* Process hardware events, e.g. card removed, link lost */ | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | while (kfifo_len(&priv->event_fifo)) { | 
|  | u32 event; | 
|  |  | 
|  | if (kfifo_out(&priv->event_fifo, | 
|  | (unsigned char *) &event, sizeof(event)) != | 
|  | sizeof(event)) | 
|  | break; | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  | lbs_process_event(priv, event); | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | } | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  |  | 
|  | if (priv->wakeup_dev_required) { | 
|  | lbs_deb_thread("Waking up device...\n"); | 
|  | /* Wake up device */ | 
|  | if (priv->exit_deep_sleep(priv)) | 
|  | lbs_deb_thread("Wakeup device failed\n"); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* command timeout stuff */ | 
|  | if (priv->cmd_timed_out && priv->cur_cmd) { | 
|  | struct cmd_ctrl_node *cmdnode = priv->cur_cmd; | 
|  |  | 
|  | netdev_info(dev, "Timeout submitting command 0x%04x\n", | 
|  | le16_to_cpu(cmdnode->cmdbuf->command)); | 
|  | lbs_complete_command(priv, cmdnode, -ETIMEDOUT); | 
|  | if (priv->reset_card) | 
|  | priv->reset_card(priv); | 
|  | } | 
|  | priv->cmd_timed_out = 0; | 
|  |  | 
|  | if (!priv->fw_ready) | 
|  | continue; | 
|  |  | 
|  | /* Check if we need to confirm Sleep Request received previously */ | 
|  | if (priv->psstate == PS_STATE_PRE_SLEEP && | 
|  | !priv->dnld_sent && !priv->cur_cmd) { | 
|  | if (priv->connect_status == LBS_CONNECTED) { | 
|  | lbs_deb_thread("pre-sleep, currenttxskb %p, " | 
|  | "dnld_sent %d, cur_cmd %p\n", | 
|  | priv->currenttxskb, priv->dnld_sent, | 
|  | priv->cur_cmd); | 
|  |  | 
|  | lbs_ps_confirm_sleep(priv); | 
|  | } else { | 
|  | /* workaround for firmware sending | 
|  | * deauth/linkloss event immediately | 
|  | * after sleep request; remove this | 
|  | * after firmware fixes it | 
|  | */ | 
|  | priv->psstate = PS_STATE_AWAKE; | 
|  | netdev_alert(dev, | 
|  | "ignore PS_SleepConfirm in non-connected state\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* The PS state is changed during processing of Sleep Request | 
|  | * event above | 
|  | */ | 
|  | if ((priv->psstate == PS_STATE_SLEEP) || | 
|  | (priv->psstate == PS_STATE_PRE_SLEEP)) | 
|  | continue; | 
|  |  | 
|  | if (priv->is_deep_sleep) | 
|  | continue; | 
|  |  | 
|  | /* Execute the next command */ | 
|  | if (!priv->dnld_sent && !priv->cur_cmd) | 
|  | lbs_execute_next_command(priv); | 
|  |  | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | if (!priv->dnld_sent && priv->tx_pending_len > 0) { | 
|  | int ret = priv->hw_host_to_card(priv, MVMS_DAT, | 
|  | priv->tx_pending_buf, | 
|  | priv->tx_pending_len); | 
|  | if (ret) { | 
|  | lbs_deb_tx("host_to_card failed %d\n", ret); | 
|  | priv->dnld_sent = DNLD_RES_RECEIVED; | 
|  | } | 
|  | priv->tx_pending_len = 0; | 
|  | if (!priv->currenttxskb) { | 
|  | /* We can wake the queues immediately if we aren't | 
|  | waiting for TX feedback */ | 
|  | if (priv->connect_status == LBS_CONNECTED) | 
|  | netif_wake_queue(priv->dev); | 
|  | if (priv->mesh_dev && | 
|  | lbs_mesh_connected(priv)) | 
|  | netif_wake_queue(priv->mesh_dev); | 
|  | } | 
|  | } | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  | } | 
|  |  | 
|  | del_timer(&priv->command_timer); | 
|  | del_timer(&priv->auto_deepsleep_timer); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_THREAD); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_setup_firmware - gets the HW spec from the firmware and sets | 
|  | *        some basic parameters | 
|  | * | 
|  | *  @priv:	A pointer to &struct lbs_private structure | 
|  | *  returns:	0 or -1 | 
|  | */ | 
|  | static int lbs_setup_firmware(struct lbs_private *priv) | 
|  | { | 
|  | int ret = -1; | 
|  | s16 curlevel = 0, minlevel = 0, maxlevel = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_FW); | 
|  |  | 
|  | /* Read MAC address from firmware */ | 
|  | memset(priv->current_addr, 0xff, ETH_ALEN); | 
|  | ret = lbs_update_hw_spec(priv); | 
|  | if (ret) | 
|  | goto done; | 
|  |  | 
|  | /* Read power levels if available */ | 
|  | ret = lbs_get_tx_power(priv, &curlevel, &minlevel, &maxlevel); | 
|  | if (ret == 0) { | 
|  | priv->txpower_cur = curlevel; | 
|  | priv->txpower_min = minlevel; | 
|  | priv->txpower_max = maxlevel; | 
|  | } | 
|  |  | 
|  | /* Send cmd to FW to enable 11D function */ | 
|  | ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_11D_ENABLE, 1); | 
|  |  | 
|  | lbs_set_mac_control(priv); | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int lbs_suspend(struct lbs_private *priv) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_FW); | 
|  |  | 
|  | if (priv->is_deep_sleep) { | 
|  | ret = lbs_set_deep_sleep(priv, 0); | 
|  | if (ret) { | 
|  | netdev_err(priv->dev, | 
|  | "deep sleep cancellation failed: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  | priv->deep_sleep_required = 1; | 
|  | } | 
|  |  | 
|  | ret = lbs_set_host_sleep(priv, 1); | 
|  |  | 
|  | netif_device_detach(priv->dev); | 
|  | if (priv->mesh_dev) | 
|  | netif_device_detach(priv->mesh_dev); | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_suspend); | 
|  |  | 
|  | int lbs_resume(struct lbs_private *priv) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_FW); | 
|  |  | 
|  | ret = lbs_set_host_sleep(priv, 0); | 
|  |  | 
|  | netif_device_attach(priv->dev); | 
|  | if (priv->mesh_dev) | 
|  | netif_device_attach(priv->mesh_dev); | 
|  |  | 
|  | if (priv->deep_sleep_required) { | 
|  | priv->deep_sleep_required = 0; | 
|  | ret = lbs_set_deep_sleep(priv, 1); | 
|  | if (ret) | 
|  | netdev_err(priv->dev, | 
|  | "deep sleep activation failed: %d\n", ret); | 
|  | } | 
|  |  | 
|  | if (priv->setup_fw_on_resume) | 
|  | ret = lbs_setup_firmware(priv); | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_resume); | 
|  |  | 
|  | /** | 
|  | * lbs_cmd_timeout_handler - handles the timeout of command sending. | 
|  | * It will re-send the same command again. | 
|  | * | 
|  | * @data: &struct lbs_private pointer | 
|  | */ | 
|  | static void lbs_cmd_timeout_handler(unsigned long data) | 
|  | { | 
|  | struct lbs_private *priv = (struct lbs_private *)data; | 
|  | unsigned long flags; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_CMD); | 
|  | spin_lock_irqsave(&priv->driver_lock, flags); | 
|  |  | 
|  | if (!priv->cur_cmd) | 
|  | goto out; | 
|  |  | 
|  | netdev_info(priv->dev, "command 0x%04x timed out\n", | 
|  | le16_to_cpu(priv->cur_cmd->cmdbuf->command)); | 
|  |  | 
|  | priv->cmd_timed_out = 1; | 
|  | wake_up_interruptible(&priv->waitq); | 
|  | out: | 
|  | spin_unlock_irqrestore(&priv->driver_lock, flags); | 
|  | lbs_deb_leave(LBS_DEB_CMD); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * auto_deepsleep_timer_fn - put the device back to deep sleep mode when | 
|  | * timer expires and no activity (command, event, data etc.) is detected. | 
|  | * @data:	&struct lbs_private pointer | 
|  | * returns:	N/A | 
|  | */ | 
|  | static void auto_deepsleep_timer_fn(unsigned long data) | 
|  | { | 
|  | struct lbs_private *priv = (struct lbs_private *)data; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_CMD); | 
|  |  | 
|  | if (priv->is_activity_detected) { | 
|  | priv->is_activity_detected = 0; | 
|  | } else { | 
|  | if (priv->is_auto_deep_sleep_enabled && | 
|  | (!priv->wakeup_dev_required) && | 
|  | (priv->connect_status != LBS_CONNECTED)) { | 
|  | struct cmd_header cmd; | 
|  |  | 
|  | lbs_deb_main("Entering auto deep sleep mode...\n"); | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.size = cpu_to_le16(sizeof(cmd)); | 
|  | lbs_cmd_async(priv, CMD_802_11_DEEP_SLEEP, &cmd, | 
|  | sizeof(cmd)); | 
|  | } | 
|  | } | 
|  | mod_timer(&priv->auto_deepsleep_timer , jiffies + | 
|  | (priv->auto_deep_sleep_timeout * HZ)/1000); | 
|  | lbs_deb_leave(LBS_DEB_CMD); | 
|  | } | 
|  |  | 
|  | int lbs_enter_auto_deep_sleep(struct lbs_private *priv) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_SDIO); | 
|  |  | 
|  | priv->is_auto_deep_sleep_enabled = 1; | 
|  | if (priv->is_deep_sleep) | 
|  | priv->wakeup_dev_required = 1; | 
|  | mod_timer(&priv->auto_deepsleep_timer , | 
|  | jiffies + (priv->auto_deep_sleep_timeout * HZ)/1000); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_SDIO); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int lbs_exit_auto_deep_sleep(struct lbs_private *priv) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_SDIO); | 
|  |  | 
|  | priv->is_auto_deep_sleep_enabled = 0; | 
|  | priv->auto_deep_sleep_timeout = 0; | 
|  | del_timer(&priv->auto_deepsleep_timer); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_SDIO); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lbs_init_adapter(struct lbs_private *priv) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | memset(priv->current_addr, 0xff, ETH_ALEN); | 
|  |  | 
|  | priv->connect_status = LBS_DISCONNECTED; | 
|  | priv->channel = DEFAULT_AD_HOC_CHANNEL; | 
|  | priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON; | 
|  | priv->radio_on = 1; | 
|  | priv->psmode = LBS802_11POWERMODECAM; | 
|  | priv->psstate = PS_STATE_FULL_POWER; | 
|  | priv->is_deep_sleep = 0; | 
|  | priv->is_auto_deep_sleep_enabled = 0; | 
|  | priv->deep_sleep_required = 0; | 
|  | priv->wakeup_dev_required = 0; | 
|  | init_waitqueue_head(&priv->ds_awake_q); | 
|  | init_waitqueue_head(&priv->scan_q); | 
|  | priv->authtype_auto = 1; | 
|  | priv->is_host_sleep_configured = 0; | 
|  | priv->is_host_sleep_activated = 0; | 
|  | init_waitqueue_head(&priv->host_sleep_q); | 
|  | mutex_init(&priv->lock); | 
|  |  | 
|  | setup_timer(&priv->command_timer, lbs_cmd_timeout_handler, | 
|  | (unsigned long)priv); | 
|  | setup_timer(&priv->auto_deepsleep_timer, auto_deepsleep_timer_fn, | 
|  | (unsigned long)priv); | 
|  |  | 
|  | INIT_LIST_HEAD(&priv->cmdfreeq); | 
|  | INIT_LIST_HEAD(&priv->cmdpendingq); | 
|  |  | 
|  | spin_lock_init(&priv->driver_lock); | 
|  |  | 
|  | /* Allocate the command buffers */ | 
|  | if (lbs_allocate_cmd_buffer(priv)) { | 
|  | pr_err("Out of memory allocating command buffers\n"); | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  | priv->resp_idx = 0; | 
|  | priv->resp_len[0] = priv->resp_len[1] = 0; | 
|  |  | 
|  | /* Create the event FIFO */ | 
|  | ret = kfifo_alloc(&priv->event_fifo, sizeof(u32) * 16, GFP_KERNEL); | 
|  | if (ret) { | 
|  | pr_err("Out of memory allocating event FIFO buffer\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void lbs_free_adapter(struct lbs_private *priv) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | lbs_free_cmd_buffer(priv); | 
|  | kfifo_free(&priv->event_fifo); | 
|  | del_timer(&priv->command_timer); | 
|  | del_timer(&priv->auto_deepsleep_timer); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops lbs_netdev_ops = { | 
|  | .ndo_open 		= lbs_dev_open, | 
|  | .ndo_stop		= lbs_eth_stop, | 
|  | .ndo_start_xmit		= lbs_hard_start_xmit, | 
|  | .ndo_set_mac_address	= lbs_set_mac_address, | 
|  | .ndo_set_multicast_list = lbs_set_multicast_list, | 
|  | .ndo_change_mtu		= eth_change_mtu, | 
|  | .ndo_validate_addr	= eth_validate_addr, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * lbs_add_card - adds the card. It will probe the | 
|  | * card, allocate the lbs_priv and initialize the device. | 
|  | * | 
|  | * @card:	A pointer to card | 
|  | * @dmdev:	A pointer to &struct device | 
|  | * returns:	A pointer to &struct lbs_private structure | 
|  | */ | 
|  | struct lbs_private *lbs_add_card(void *card, struct device *dmdev) | 
|  | { | 
|  | struct net_device *dev; | 
|  | struct wireless_dev *wdev; | 
|  | struct lbs_private *priv = NULL; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | /* Allocate an Ethernet device and register it */ | 
|  | wdev = lbs_cfg_alloc(dmdev); | 
|  | if (IS_ERR(wdev)) { | 
|  | pr_err("cfg80211 init failed\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | wdev->iftype = NL80211_IFTYPE_STATION; | 
|  | priv = wdev_priv(wdev); | 
|  | priv->wdev = wdev; | 
|  |  | 
|  | if (lbs_init_adapter(priv)) { | 
|  | pr_err("failed to initialize adapter structure\n"); | 
|  | goto err_wdev; | 
|  | } | 
|  |  | 
|  | dev = alloc_netdev(0, "wlan%d", ether_setup); | 
|  | if (!dev) { | 
|  | dev_err(dmdev, "no memory for network device instance\n"); | 
|  | goto err_adapter; | 
|  | } | 
|  |  | 
|  | dev->ieee80211_ptr = wdev; | 
|  | dev->ml_priv = priv; | 
|  | SET_NETDEV_DEV(dev, dmdev); | 
|  | wdev->netdev = dev; | 
|  | priv->dev = dev; | 
|  |  | 
|  | dev->netdev_ops = &lbs_netdev_ops; | 
|  | dev->watchdog_timeo = 5 * HZ; | 
|  | dev->ethtool_ops = &lbs_ethtool_ops; | 
|  | dev->flags |= IFF_BROADCAST | IFF_MULTICAST; | 
|  |  | 
|  | priv->card = card; | 
|  |  | 
|  | strcpy(dev->name, "wlan%d"); | 
|  |  | 
|  | lbs_deb_thread("Starting main thread...\n"); | 
|  | init_waitqueue_head(&priv->waitq); | 
|  | priv->main_thread = kthread_run(lbs_thread, dev, "lbs_main"); | 
|  | if (IS_ERR(priv->main_thread)) { | 
|  | lbs_deb_thread("Error creating main thread.\n"); | 
|  | goto err_ndev; | 
|  | } | 
|  |  | 
|  | priv->work_thread = create_singlethread_workqueue("lbs_worker"); | 
|  | INIT_WORK(&priv->mcast_work, lbs_set_mcast_worker); | 
|  |  | 
|  | priv->wol_criteria = EHS_REMOVE_WAKEUP; | 
|  | priv->wol_gpio = 0xff; | 
|  | priv->wol_gap = 20; | 
|  | priv->ehs_remove_supported = true; | 
|  |  | 
|  | goto done; | 
|  |  | 
|  | err_ndev: | 
|  | free_netdev(dev); | 
|  |  | 
|  | err_adapter: | 
|  | lbs_free_adapter(priv); | 
|  |  | 
|  | err_wdev: | 
|  | lbs_cfg_free(priv); | 
|  |  | 
|  | priv = NULL; | 
|  |  | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_MAIN, "priv %p", priv); | 
|  | return priv; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_add_card); | 
|  |  | 
|  |  | 
|  | void lbs_remove_card(struct lbs_private *priv) | 
|  | { | 
|  | struct net_device *dev = priv->dev; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | lbs_remove_mesh(priv); | 
|  | lbs_scan_deinit(priv); | 
|  |  | 
|  | dev = priv->dev; | 
|  |  | 
|  | cancel_work_sync(&priv->mcast_work); | 
|  |  | 
|  | /* worker thread destruction blocks on the in-flight command which | 
|  | * should have been cleared already in lbs_stop_card(). | 
|  | */ | 
|  | lbs_deb_main("destroying worker thread\n"); | 
|  | destroy_workqueue(priv->work_thread); | 
|  | lbs_deb_main("done destroying worker thread\n"); | 
|  |  | 
|  | if (priv->psmode == LBS802_11POWERMODEMAX_PSP) { | 
|  | priv->psmode = LBS802_11POWERMODECAM; | 
|  | lbs_set_ps_mode(priv, PS_MODE_ACTION_EXIT_PS, true); | 
|  | } | 
|  |  | 
|  | if (priv->is_deep_sleep) { | 
|  | priv->is_deep_sleep = 0; | 
|  | wake_up_interruptible(&priv->ds_awake_q); | 
|  | } | 
|  |  | 
|  | priv->is_host_sleep_configured = 0; | 
|  | priv->is_host_sleep_activated = 0; | 
|  | wake_up_interruptible(&priv->host_sleep_q); | 
|  |  | 
|  | /* Stop the thread servicing the interrupts */ | 
|  | priv->surpriseremoved = 1; | 
|  | kthread_stop(priv->main_thread); | 
|  |  | 
|  | lbs_free_adapter(priv); | 
|  | lbs_cfg_free(priv); | 
|  | free_netdev(dev); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_remove_card); | 
|  |  | 
|  |  | 
|  | int lbs_rtap_supported(struct lbs_private *priv) | 
|  | { | 
|  | if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5) | 
|  | return 1; | 
|  |  | 
|  | /* newer firmware use a capability mask */ | 
|  | return ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) && | 
|  | (priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK)); | 
|  | } | 
|  |  | 
|  |  | 
|  | int lbs_start_card(struct lbs_private *priv) | 
|  | { | 
|  | struct net_device *dev = priv->dev; | 
|  | int ret = -1; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | /* poke the firmware */ | 
|  | ret = lbs_setup_firmware(priv); | 
|  | if (ret) | 
|  | goto done; | 
|  |  | 
|  | if (lbs_cfg_register(priv)) { | 
|  | pr_err("cannot register device\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | lbs_update_channel(priv); | 
|  |  | 
|  | if (!lbs_disablemesh) | 
|  | lbs_init_mesh(priv); | 
|  | else | 
|  | pr_info("%s: mesh disabled\n", dev->name); | 
|  |  | 
|  | lbs_debugfs_init_one(priv, dev); | 
|  |  | 
|  | netdev_info(dev, "Marvell WLAN 802.11 adapter\n"); | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_start_card); | 
|  |  | 
|  |  | 
|  | void lbs_stop_card(struct lbs_private *priv) | 
|  | { | 
|  | struct net_device *dev; | 
|  | struct cmd_ctrl_node *cmdnode; | 
|  | unsigned long flags; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | if (!priv) | 
|  | goto out; | 
|  | dev = priv->dev; | 
|  |  | 
|  | netif_stop_queue(dev); | 
|  | netif_carrier_off(dev); | 
|  |  | 
|  | lbs_debugfs_remove_one(priv); | 
|  | lbs_deinit_mesh(priv); | 
|  |  | 
|  | /* Delete the timeout of the currently processing command */ | 
|  | del_timer_sync(&priv->command_timer); | 
|  | del_timer_sync(&priv->auto_deepsleep_timer); | 
|  |  | 
|  | /* Flush pending command nodes */ | 
|  | spin_lock_irqsave(&priv->driver_lock, flags); | 
|  | lbs_deb_main("clearing pending commands\n"); | 
|  | list_for_each_entry(cmdnode, &priv->cmdpendingq, list) { | 
|  | cmdnode->result = -ENOENT; | 
|  | cmdnode->cmdwaitqwoken = 1; | 
|  | wake_up_interruptible(&cmdnode->cmdwait_q); | 
|  | } | 
|  |  | 
|  | /* Flush the command the card is currently processing */ | 
|  | if (priv->cur_cmd) { | 
|  | lbs_deb_main("clearing current command\n"); | 
|  | priv->cur_cmd->result = -ENOENT; | 
|  | priv->cur_cmd->cmdwaitqwoken = 1; | 
|  | wake_up_interruptible(&priv->cur_cmd->cmdwait_q); | 
|  | } | 
|  | lbs_deb_main("done clearing commands\n"); | 
|  | spin_unlock_irqrestore(&priv->driver_lock, flags); | 
|  |  | 
|  | unregister_netdev(dev); | 
|  |  | 
|  | out: | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_stop_card); | 
|  |  | 
|  |  | 
|  | void lbs_queue_event(struct lbs_private *priv, u32 event) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_THREAD); | 
|  | spin_lock_irqsave(&priv->driver_lock, flags); | 
|  |  | 
|  | if (priv->psstate == PS_STATE_SLEEP) | 
|  | priv->psstate = PS_STATE_AWAKE; | 
|  |  | 
|  | kfifo_in(&priv->event_fifo, (unsigned char *) &event, sizeof(u32)); | 
|  |  | 
|  | wake_up_interruptible(&priv->waitq); | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->driver_lock, flags); | 
|  | lbs_deb_leave(LBS_DEB_THREAD); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_queue_event); | 
|  |  | 
|  | void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_THREAD); | 
|  |  | 
|  | if (priv->psstate == PS_STATE_SLEEP) | 
|  | priv->psstate = PS_STATE_AWAKE; | 
|  |  | 
|  | /* Swap buffers by flipping the response index */ | 
|  | BUG_ON(resp_idx > 1); | 
|  | priv->resp_idx = resp_idx; | 
|  |  | 
|  | wake_up_interruptible(&priv->waitq); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_THREAD); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_notify_command_response); | 
|  |  | 
|  | /** | 
|  | *  lbs_get_firmware - Retrieves two-stage firmware | 
|  | * | 
|  | *  @dev:     	A pointer to &device structure | 
|  | *  @user_helper: User-defined helper firmware file | 
|  | *  @user_mainfw: User-defined main firmware file | 
|  | *  @card_model: Bus-specific card model ID used to filter firmware table | 
|  | *		elements | 
|  | *  @fw_table:	Table of firmware file names and device model numbers | 
|  | *		terminated by an entry with a NULL helper name | 
|  | *  @helper:	On success, the helper firmware; caller must free | 
|  | *  @mainfw:	On success, the main firmware; caller must free | 
|  | * | 
|  | *  returns:		0 on success, non-zero on failure | 
|  | */ | 
|  | int lbs_get_firmware(struct device *dev, const char *user_helper, | 
|  | const char *user_mainfw, u32 card_model, | 
|  | const struct lbs_fw_table *fw_table, | 
|  | const struct firmware **helper, | 
|  | const struct firmware **mainfw) | 
|  | { | 
|  | const struct lbs_fw_table *iter; | 
|  | int ret; | 
|  |  | 
|  | BUG_ON(helper == NULL); | 
|  | BUG_ON(mainfw == NULL); | 
|  |  | 
|  | /* Try user-specified firmware first */ | 
|  | if (user_helper) { | 
|  | ret = request_firmware(helper, user_helper, dev); | 
|  | if (ret) { | 
|  | dev_err(dev, "couldn't find helper firmware %s\n", | 
|  | user_helper); | 
|  | goto fail; | 
|  | } | 
|  | } | 
|  | if (user_mainfw) { | 
|  | ret = request_firmware(mainfw, user_mainfw, dev); | 
|  | if (ret) { | 
|  | dev_err(dev, "couldn't find main firmware %s\n", | 
|  | user_mainfw); | 
|  | goto fail; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (*helper && *mainfw) | 
|  | return 0; | 
|  |  | 
|  | /* Otherwise search for firmware to use.  If neither the helper or | 
|  | * the main firmware were specified by the user, then we need to | 
|  | * make sure that found helper & main are from the same entry in | 
|  | * fw_table. | 
|  | */ | 
|  | iter = fw_table; | 
|  | while (iter && iter->helper) { | 
|  | if (iter->model != card_model) | 
|  | goto next; | 
|  |  | 
|  | if (*helper == NULL) { | 
|  | ret = request_firmware(helper, iter->helper, dev); | 
|  | if (ret) | 
|  | goto next; | 
|  |  | 
|  | /* If the device has one-stage firmware (ie cf8305) and | 
|  | * we've got it then we don't need to bother with the | 
|  | * main firmware. | 
|  | */ | 
|  | if (iter->fwname == NULL) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (*mainfw == NULL) { | 
|  | ret = request_firmware(mainfw, iter->fwname, dev); | 
|  | if (ret && !user_helper) { | 
|  | /* Clear the helper if it wasn't user-specified | 
|  | * and the main firmware load failed, to ensure | 
|  | * we don't have mismatched firmware pairs. | 
|  | */ | 
|  | release_firmware(*helper); | 
|  | *helper = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (*helper && *mainfw) | 
|  | return 0; | 
|  |  | 
|  | next: | 
|  | iter++; | 
|  | } | 
|  |  | 
|  | fail: | 
|  | /* Failed */ | 
|  | if (*helper) { | 
|  | release_firmware(*helper); | 
|  | *helper = NULL; | 
|  | } | 
|  | if (*mainfw) { | 
|  | release_firmware(*mainfw); | 
|  | *mainfw = NULL; | 
|  | } | 
|  |  | 
|  | return -ENOENT; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_get_firmware); | 
|  |  | 
|  | static int __init lbs_init_module(void) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  | memset(&confirm_sleep, 0, sizeof(confirm_sleep)); | 
|  | confirm_sleep.hdr.command = cpu_to_le16(CMD_802_11_PS_MODE); | 
|  | confirm_sleep.hdr.size = cpu_to_le16(sizeof(confirm_sleep)); | 
|  | confirm_sleep.action = cpu_to_le16(PS_MODE_ACTION_SLEEP_CONFIRMED); | 
|  | lbs_debugfs_init(); | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit lbs_exit_module(void) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  | lbs_debugfs_remove(); | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | } | 
|  |  | 
|  | module_init(lbs_init_module); | 
|  | module_exit(lbs_exit_module); | 
|  |  | 
|  | MODULE_DESCRIPTION("Libertas WLAN Driver Library"); | 
|  | MODULE_AUTHOR("Marvell International Ltd."); | 
|  | MODULE_LICENSE("GPL"); |