|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/if_ether.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/kfifo.h> | 
|  | #include <net/cfg80211.h> | 
|  |  | 
|  | #include "mesh.h" | 
|  | #include "decl.h" | 
|  | #include "cmd.h" | 
|  |  | 
|  |  | 
|  | /*************************************************************************** | 
|  | * Mesh sysfs support | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Attributes exported through sysfs | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * lbs_anycast_get - Get function for sysfs attribute anycast_mask | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer where data will be returned | 
|  | */ | 
|  | static ssize_t lbs_anycast_get(struct device *dev, | 
|  | struct device_attribute *attr, char * buf) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | struct cmd_ds_mesh_access mesh_access; | 
|  | int ret; | 
|  |  | 
|  | memset(&mesh_access, 0, sizeof(mesh_access)); | 
|  |  | 
|  | ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_ANYCAST, &mesh_access); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return snprintf(buf, 12, "0x%X\n", le32_to_cpu(mesh_access.data[0])); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_anycast_set - Set function for sysfs attribute anycast_mask | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer that contains new attribute value | 
|  | * @count: size of buffer | 
|  | */ | 
|  | static ssize_t lbs_anycast_set(struct device *dev, | 
|  | struct device_attribute *attr, const char * buf, size_t count) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | struct cmd_ds_mesh_access mesh_access; | 
|  | uint32_t datum; | 
|  | int ret; | 
|  |  | 
|  | memset(&mesh_access, 0, sizeof(mesh_access)); | 
|  | sscanf(buf, "%x", &datum); | 
|  | mesh_access.data[0] = cpu_to_le32(datum); | 
|  |  | 
|  | ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_ANYCAST, &mesh_access); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_prb_rsp_limit_get - Get function for sysfs attribute prb_rsp_limit | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer where data will be returned | 
|  | */ | 
|  | static ssize_t lbs_prb_rsp_limit_get(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | struct cmd_ds_mesh_access mesh_access; | 
|  | int ret; | 
|  | u32 retry_limit; | 
|  |  | 
|  | memset(&mesh_access, 0, sizeof(mesh_access)); | 
|  | mesh_access.data[0] = cpu_to_le32(CMD_ACT_GET); | 
|  |  | 
|  | ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT, | 
|  | &mesh_access); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | retry_limit = le32_to_cpu(mesh_access.data[1]); | 
|  | return snprintf(buf, 10, "%d\n", retry_limit); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_prb_rsp_limit_set - Set function for sysfs attribute prb_rsp_limit | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer that contains new attribute value | 
|  | * @count: size of buffer | 
|  | */ | 
|  | static ssize_t lbs_prb_rsp_limit_set(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | struct cmd_ds_mesh_access mesh_access; | 
|  | int ret; | 
|  | unsigned long retry_limit; | 
|  |  | 
|  | memset(&mesh_access, 0, sizeof(mesh_access)); | 
|  | mesh_access.data[0] = cpu_to_le32(CMD_ACT_SET); | 
|  |  | 
|  | if (!strict_strtoul(buf, 10, &retry_limit)) | 
|  | return -ENOTSUPP; | 
|  | if (retry_limit > 15) | 
|  | return -ENOTSUPP; | 
|  |  | 
|  | mesh_access.data[1] = cpu_to_le32(retry_limit); | 
|  |  | 
|  | ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT, | 
|  | &mesh_access); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_mesh_get - Get function for sysfs attribute mesh | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer where data will be returned | 
|  | */ | 
|  | static ssize_t lbs_mesh_get(struct device *dev, | 
|  | struct device_attribute *attr, char * buf) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | return snprintf(buf, 5, "0x%X\n", !!priv->mesh_dev); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_mesh_set - Set function for sysfs attribute mesh | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer that contains new attribute value | 
|  | * @count: size of buffer | 
|  | */ | 
|  | static ssize_t lbs_mesh_set(struct device *dev, | 
|  | struct device_attribute *attr, const char * buf, size_t count) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | int enable; | 
|  | int ret, action = CMD_ACT_MESH_CONFIG_STOP; | 
|  |  | 
|  | sscanf(buf, "%x", &enable); | 
|  | enable = !!enable; | 
|  | if (enable == !!priv->mesh_dev) | 
|  | return count; | 
|  | if (enable) | 
|  | action = CMD_ACT_MESH_CONFIG_START; | 
|  | ret = lbs_mesh_config(priv, action, priv->channel); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (enable) | 
|  | lbs_add_mesh(priv); | 
|  | else | 
|  | lbs_remove_mesh(priv); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * lbs_mesh attribute to be exported per ethX interface | 
|  | * through sysfs (/sys/class/net/ethX/lbs_mesh) | 
|  | */ | 
|  | static DEVICE_ATTR(lbs_mesh, 0644, lbs_mesh_get, lbs_mesh_set); | 
|  |  | 
|  | /* | 
|  | * anycast_mask attribute to be exported per mshX interface | 
|  | * through sysfs (/sys/class/net/mshX/anycast_mask) | 
|  | */ | 
|  | static DEVICE_ATTR(anycast_mask, 0644, lbs_anycast_get, lbs_anycast_set); | 
|  |  | 
|  | /* | 
|  | * prb_rsp_limit attribute to be exported per mshX interface | 
|  | * through sysfs (/sys/class/net/mshX/prb_rsp_limit) | 
|  | */ | 
|  | static DEVICE_ATTR(prb_rsp_limit, 0644, lbs_prb_rsp_limit_get, | 
|  | lbs_prb_rsp_limit_set); | 
|  |  | 
|  | static struct attribute *lbs_mesh_sysfs_entries[] = { | 
|  | &dev_attr_anycast_mask.attr, | 
|  | &dev_attr_prb_rsp_limit.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct attribute_group lbs_mesh_attr_group = { | 
|  | .attrs = lbs_mesh_sysfs_entries, | 
|  | }; | 
|  |  | 
|  |  | 
|  |  | 
|  | /*************************************************************************** | 
|  | * Initializing and starting, stopping mesh | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Check mesh FW version and appropriately send the mesh start | 
|  | * command | 
|  | */ | 
|  | int lbs_init_mesh(struct lbs_private *priv) | 
|  | { | 
|  | struct net_device *dev = priv->dev; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MESH); | 
|  |  | 
|  | priv->mesh_connect_status = LBS_DISCONNECTED; | 
|  |  | 
|  | /* Determine mesh_fw_ver from fwrelease and fwcapinfo */ | 
|  | /* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */ | 
|  | /* 5.110.22 have mesh command with 0xa3 command id */ | 
|  | /* 10.0.0.p0 FW brings in mesh config command with different id */ | 
|  | /* Check FW version MSB and initialize mesh_fw_ver */ | 
|  | if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5) { | 
|  | /* Enable mesh, if supported, and work out which TLV it uses. | 
|  | 0x100 + 291 is an unofficial value used in 5.110.20.pXX | 
|  | 0x100 + 37 is the official value used in 5.110.21.pXX | 
|  | but we check them in that order because 20.pXX doesn't | 
|  | give an error -- it just silently fails. */ | 
|  |  | 
|  | /* 5.110.20.pXX firmware will fail the command if the channel | 
|  | doesn't match the existing channel. But only if the TLV | 
|  | is correct. If the channel is wrong, _BOTH_ versions will | 
|  | give an error to 0x100+291, and allow 0x100+37 to succeed. | 
|  | It's just that 5.110.20.pXX will not have done anything | 
|  | useful */ | 
|  |  | 
|  | priv->mesh_tlv = TLV_TYPE_OLD_MESH_ID; | 
|  | if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, | 
|  | priv->channel)) { | 
|  | priv->mesh_tlv = TLV_TYPE_MESH_ID; | 
|  | if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, | 
|  | priv->channel)) | 
|  | priv->mesh_tlv = 0; | 
|  | } | 
|  | } else | 
|  | if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) && | 
|  | (priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK)) { | 
|  | /* 10.0.0.pXX new firmwares should succeed with TLV | 
|  | * 0x100+37; Do not invoke command with old TLV. | 
|  | */ | 
|  | priv->mesh_tlv = TLV_TYPE_MESH_ID; | 
|  | if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, | 
|  | priv->channel)) | 
|  | priv->mesh_tlv = 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | if (priv->mesh_tlv) { | 
|  | sprintf(priv->mesh_ssid, "mesh"); | 
|  | priv->mesh_ssid_len = 4; | 
|  |  | 
|  | lbs_add_mesh(priv); | 
|  |  | 
|  | if (device_create_file(&dev->dev, &dev_attr_lbs_mesh)) | 
|  | netdev_err(dev, "cannot register lbs_mesh attribute\n"); | 
|  |  | 
|  | ret = 1; | 
|  | } | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | int lbs_deinit_mesh(struct lbs_private *priv) | 
|  | { | 
|  | struct net_device *dev = priv->dev; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MESH); | 
|  |  | 
|  | if (priv->mesh_tlv) { | 
|  | device_remove_file(&dev->dev, &dev_attr_lbs_mesh); | 
|  | ret = 1; | 
|  | } | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * lbs_mesh_stop - close the mshX interface | 
|  | * | 
|  | * @dev:	A pointer to &net_device structure | 
|  | * returns:	0 | 
|  | */ | 
|  | static int lbs_mesh_stop(struct net_device *dev) | 
|  | { | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MESH); | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  |  | 
|  | priv->mesh_open = 0; | 
|  | priv->mesh_connect_status = LBS_DISCONNECTED; | 
|  |  | 
|  | netif_stop_queue(dev); | 
|  | netif_carrier_off(dev); | 
|  |  | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  |  | 
|  | schedule_work(&priv->mcast_work); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_MESH); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_mesh_dev_open - open the mshX interface | 
|  | * | 
|  | * @dev:	A pointer to &net_device structure | 
|  | * returns:	0 or -EBUSY if monitor mode active | 
|  | */ | 
|  | static int lbs_mesh_dev_open(struct net_device *dev) | 
|  | { | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_NET); | 
|  |  | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  |  | 
|  | if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) { | 
|  | ret = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | priv->mesh_open = 1; | 
|  | priv->mesh_connect_status = LBS_CONNECTED; | 
|  | netif_carrier_on(dev); | 
|  |  | 
|  | if (!priv->tx_pending_len) | 
|  | netif_wake_queue(dev); | 
|  | out: | 
|  |  | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  | lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops mesh_netdev_ops = { | 
|  | .ndo_open		= lbs_mesh_dev_open, | 
|  | .ndo_stop 		= lbs_mesh_stop, | 
|  | .ndo_start_xmit		= lbs_hard_start_xmit, | 
|  | .ndo_set_mac_address	= lbs_set_mac_address, | 
|  | .ndo_set_multicast_list = lbs_set_multicast_list, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * lbs_add_mesh - add mshX interface | 
|  | * | 
|  | * @priv:	A pointer to the &struct lbs_private structure | 
|  | * returns:	0 if successful, -X otherwise | 
|  | */ | 
|  | int lbs_add_mesh(struct lbs_private *priv) | 
|  | { | 
|  | struct net_device *mesh_dev = NULL; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MESH); | 
|  |  | 
|  | /* Allocate a virtual mesh device */ | 
|  | mesh_dev = alloc_netdev(0, "msh%d", ether_setup); | 
|  | if (!mesh_dev) { | 
|  | lbs_deb_mesh("init mshX device failed\n"); | 
|  | ret = -ENOMEM; | 
|  | goto done; | 
|  | } | 
|  | mesh_dev->ml_priv = priv; | 
|  | priv->mesh_dev = mesh_dev; | 
|  |  | 
|  | mesh_dev->netdev_ops = &mesh_netdev_ops; | 
|  | mesh_dev->ethtool_ops = &lbs_ethtool_ops; | 
|  | memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, ETH_ALEN); | 
|  |  | 
|  | SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent); | 
|  |  | 
|  | mesh_dev->flags |= IFF_BROADCAST | IFF_MULTICAST; | 
|  | /* Register virtual mesh interface */ | 
|  | ret = register_netdev(mesh_dev); | 
|  | if (ret) { | 
|  | pr_err("cannot register mshX virtual interface\n"); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | ret = sysfs_create_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group); | 
|  | if (ret) | 
|  | goto err_unregister; | 
|  |  | 
|  | lbs_persist_config_init(mesh_dev); | 
|  |  | 
|  | /* Everything successful */ | 
|  | ret = 0; | 
|  | goto done; | 
|  |  | 
|  | err_unregister: | 
|  | unregister_netdev(mesh_dev); | 
|  |  | 
|  | err_free: | 
|  | free_netdev(mesh_dev); | 
|  |  | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void lbs_remove_mesh(struct lbs_private *priv) | 
|  | { | 
|  | struct net_device *mesh_dev; | 
|  |  | 
|  | mesh_dev = priv->mesh_dev; | 
|  | if (!mesh_dev) | 
|  | return; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MESH); | 
|  | netif_stop_queue(mesh_dev); | 
|  | netif_carrier_off(mesh_dev); | 
|  | sysfs_remove_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group); | 
|  | lbs_persist_config_remove(mesh_dev); | 
|  | unregister_netdev(mesh_dev); | 
|  | priv->mesh_dev = NULL; | 
|  | free_netdev(mesh_dev); | 
|  | lbs_deb_leave(LBS_DEB_MESH); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /*************************************************************************** | 
|  | * Sending and receiving | 
|  | */ | 
|  | struct net_device *lbs_mesh_set_dev(struct lbs_private *priv, | 
|  | struct net_device *dev, struct rxpd *rxpd) | 
|  | { | 
|  | if (priv->mesh_dev) { | 
|  | if (priv->mesh_tlv == TLV_TYPE_OLD_MESH_ID) { | 
|  | if (rxpd->rx_control & RxPD_MESH_FRAME) | 
|  | dev = priv->mesh_dev; | 
|  | } else if (priv->mesh_tlv == TLV_TYPE_MESH_ID) { | 
|  | if (rxpd->u.bss.bss_num == MESH_IFACE_ID) | 
|  | dev = priv->mesh_dev; | 
|  | } | 
|  | } | 
|  | return dev; | 
|  | } | 
|  |  | 
|  |  | 
|  | void lbs_mesh_set_txpd(struct lbs_private *priv, | 
|  | struct net_device *dev, struct txpd *txpd) | 
|  | { | 
|  | if (dev == priv->mesh_dev) { | 
|  | if (priv->mesh_tlv == TLV_TYPE_OLD_MESH_ID) | 
|  | txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME); | 
|  | else if (priv->mesh_tlv == TLV_TYPE_MESH_ID) | 
|  | txpd->u.bss.bss_num = MESH_IFACE_ID; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /*************************************************************************** | 
|  | * Mesh command handling | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * lbs_mesh_bt_add_del - Add or delete Mesh Blinding Table entries | 
|  | * | 
|  | * @priv:	A pointer to &struct lbs_private structure | 
|  | * @add:	TRUE to add the entry, FALSE to delete it | 
|  | * @addr1:	Destination address to blind or unblind | 
|  | * | 
|  | * returns:	0 on success, error on failure | 
|  | */ | 
|  | int lbs_mesh_bt_add_del(struct lbs_private *priv, bool add, u8 *addr1) | 
|  | { | 
|  | struct cmd_ds_bt_access cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_CMD); | 
|  |  | 
|  | BUG_ON(addr1 == NULL); | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | 
|  | memcpy(cmd.addr1, addr1, ETH_ALEN); | 
|  | if (add) { | 
|  | cmd.action = cpu_to_le16(CMD_ACT_BT_ACCESS_ADD); | 
|  | lbs_deb_hex(LBS_DEB_MESH, "BT_ADD: blinded MAC addr", | 
|  | addr1, ETH_ALEN); | 
|  | } else { | 
|  | cmd.action = cpu_to_le16(CMD_ACT_BT_ACCESS_DEL); | 
|  | lbs_deb_hex(LBS_DEB_MESH, "BT_DEL: blinded MAC addr", | 
|  | addr1, ETH_ALEN); | 
|  | } | 
|  |  | 
|  | ret = lbs_cmd_with_response(priv, CMD_BT_ACCESS, &cmd); | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_mesh_bt_reset - Reset/clear the mesh blinding table | 
|  | * | 
|  | * @priv:	A pointer to &struct lbs_private structure | 
|  | * | 
|  | * returns:	0 on success, error on failure | 
|  | */ | 
|  | int lbs_mesh_bt_reset(struct lbs_private *priv) | 
|  | { | 
|  | struct cmd_ds_bt_access cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_CMD); | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | 
|  | cmd.action = cpu_to_le16(CMD_ACT_BT_ACCESS_RESET); | 
|  |  | 
|  | ret = lbs_cmd_with_response(priv, CMD_BT_ACCESS, &cmd); | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_mesh_bt_get_inverted - Gets the inverted status of the mesh | 
|  | * blinding table | 
|  | * | 
|  | * Normally the firmware "blinds" or ignores traffic from mesh nodes in the | 
|  | * table, but an inverted table allows *only* traffic from nodes listed in | 
|  | * the table. | 
|  | * | 
|  | * @priv:	A pointer to &struct lbs_private structure | 
|  | * @inverted:  	On success, TRUE if the blinding table is inverted, | 
|  | *		FALSE if it is not inverted | 
|  | * | 
|  | * returns:	0 on success, error on failure | 
|  | */ | 
|  | int lbs_mesh_bt_get_inverted(struct lbs_private *priv, bool *inverted) | 
|  | { | 
|  | struct cmd_ds_bt_access cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_CMD); | 
|  |  | 
|  | BUG_ON(inverted == NULL); | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | 
|  | cmd.action = cpu_to_le16(CMD_ACT_BT_ACCESS_GET_INVERT); | 
|  |  | 
|  | ret = lbs_cmd_with_response(priv, CMD_BT_ACCESS, &cmd); | 
|  | if (ret == 0) | 
|  | *inverted = !!cmd.id; | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_mesh_bt_set_inverted - Sets the inverted status of the mesh | 
|  | * blinding table | 
|  | * | 
|  | * Normally the firmware "blinds" or ignores traffic from mesh nodes in the | 
|  | * table, but an inverted table allows *only* traffic from nodes listed in | 
|  | * the table. | 
|  | * | 
|  | * @priv:	A pointer to &struct lbs_private structure | 
|  | * @inverted:	TRUE to invert the blinding table (only traffic from | 
|  | *		listed nodes allowed), FALSE to return it | 
|  | *		to normal state (listed nodes ignored) | 
|  | * | 
|  | * returns:	0 on success, error on failure | 
|  | */ | 
|  | int lbs_mesh_bt_set_inverted(struct lbs_private *priv, bool inverted) | 
|  | { | 
|  | struct cmd_ds_bt_access cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_CMD); | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | 
|  | cmd.action = cpu_to_le16(CMD_ACT_BT_ACCESS_SET_INVERT); | 
|  | cmd.id = cpu_to_le32(!!inverted); | 
|  |  | 
|  | ret = lbs_cmd_with_response(priv, CMD_BT_ACCESS, &cmd); | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_mesh_bt_get_entry - List an entry in the mesh blinding table | 
|  | * | 
|  | * @priv:	A pointer to &struct lbs_private structure | 
|  | * @id:		The ID of the entry to list | 
|  | * @addr1:	MAC address associated with the table entry | 
|  | * | 
|  | * returns: 	   	0 on success, error on failure | 
|  | */ | 
|  | int lbs_mesh_bt_get_entry(struct lbs_private *priv, u32 id, u8 *addr1) | 
|  | { | 
|  | struct cmd_ds_bt_access cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_CMD); | 
|  |  | 
|  | BUG_ON(addr1 == NULL); | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | 
|  | cmd.action = cpu_to_le16(CMD_ACT_BT_ACCESS_SET_INVERT); | 
|  | cmd.id = cpu_to_le32(id); | 
|  |  | 
|  | ret = lbs_cmd_with_response(priv, CMD_BT_ACCESS, &cmd); | 
|  | if (ret == 0) | 
|  | memcpy(addr1, cmd.addr1, sizeof(cmd.addr1)); | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_cmd_fwt_access - Access the mesh forwarding table | 
|  | * | 
|  | * @priv:	A pointer to &struct lbs_private structure | 
|  | * @cmd_action:	The forwarding table action to perform | 
|  | * @cmd:	The pre-filled FWT_ACCESS command | 
|  | * | 
|  | * returns:	0 on success and 'cmd' will be filled with the | 
|  | *		firmware's response | 
|  | */ | 
|  | int lbs_cmd_fwt_access(struct lbs_private *priv, u16 cmd_action, | 
|  | struct cmd_ds_fwt_access *cmd) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action); | 
|  |  | 
|  | cmd->hdr.command = cpu_to_le16(CMD_FWT_ACCESS); | 
|  | cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_fwt_access)); | 
|  | cmd->hdr.result = 0; | 
|  | cmd->action = cpu_to_le16(cmd_action); | 
|  |  | 
|  | ret = lbs_cmd_with_response(priv, CMD_FWT_ACCESS, cmd); | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action, | 
|  | struct cmd_ds_mesh_access *cmd) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action); | 
|  |  | 
|  | cmd->hdr.command = cpu_to_le16(CMD_MESH_ACCESS); | 
|  | cmd->hdr.size = cpu_to_le16(sizeof(*cmd)); | 
|  | cmd->hdr.result = 0; | 
|  |  | 
|  | cmd->action = cpu_to_le16(cmd_action); | 
|  |  | 
|  | ret = lbs_cmd_with_response(priv, CMD_MESH_ACCESS, cmd); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_CMD); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __lbs_mesh_config_send(struct lbs_private *priv, | 
|  | struct cmd_ds_mesh_config *cmd, | 
|  | uint16_t action, uint16_t type) | 
|  | { | 
|  | int ret; | 
|  | u16 command = CMD_MESH_CONFIG_OLD; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_CMD); | 
|  |  | 
|  | /* | 
|  | * Command id is 0xac for v10 FW along with mesh interface | 
|  | * id in bits 14-13-12. | 
|  | */ | 
|  | if (priv->mesh_tlv == TLV_TYPE_MESH_ID) | 
|  | command = CMD_MESH_CONFIG | | 
|  | (MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET); | 
|  |  | 
|  | cmd->hdr.command = cpu_to_le16(command); | 
|  | cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config)); | 
|  | cmd->hdr.result = 0; | 
|  |  | 
|  | cmd->type = cpu_to_le16(type); | 
|  | cmd->action = cpu_to_le16(action); | 
|  |  | 
|  | ret = lbs_cmd_with_response(priv, command, cmd); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_CMD); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int lbs_mesh_config_send(struct lbs_private *priv, | 
|  | struct cmd_ds_mesh_config *cmd, | 
|  | uint16_t action, uint16_t type) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!(priv->fwcapinfo & FW_CAPINFO_PERSISTENT_CONFIG)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | ret = __lbs_mesh_config_send(priv, cmd, action, type); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* This function is the CMD_MESH_CONFIG legacy function.  It only handles the | 
|  | * START and STOP actions.  The extended actions supported by CMD_MESH_CONFIG | 
|  | * are all handled by preparing a struct cmd_ds_mesh_config and passing it to | 
|  | * lbs_mesh_config_send. | 
|  | */ | 
|  | int lbs_mesh_config(struct lbs_private *priv, uint16_t action, uint16_t chan) | 
|  | { | 
|  | struct cmd_ds_mesh_config cmd; | 
|  | struct mrvl_meshie *ie; | 
|  | DECLARE_SSID_BUF(ssid); | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.channel = cpu_to_le16(chan); | 
|  | ie = (struct mrvl_meshie *)cmd.data; | 
|  |  | 
|  | switch (action) { | 
|  | case CMD_ACT_MESH_CONFIG_START: | 
|  | ie->id = WLAN_EID_GENERIC; | 
|  | ie->val.oui[0] = 0x00; | 
|  | ie->val.oui[1] = 0x50; | 
|  | ie->val.oui[2] = 0x43; | 
|  | ie->val.type = MARVELL_MESH_IE_TYPE; | 
|  | ie->val.subtype = MARVELL_MESH_IE_SUBTYPE; | 
|  | ie->val.version = MARVELL_MESH_IE_VERSION; | 
|  | ie->val.active_protocol_id = MARVELL_MESH_PROTO_ID_HWMP; | 
|  | ie->val.active_metric_id = MARVELL_MESH_METRIC_ID; | 
|  | ie->val.mesh_capability = MARVELL_MESH_CAPABILITY; | 
|  | ie->val.mesh_id_len = priv->mesh_ssid_len; | 
|  | memcpy(ie->val.mesh_id, priv->mesh_ssid, priv->mesh_ssid_len); | 
|  | ie->len = sizeof(struct mrvl_meshie_val) - | 
|  | IEEE80211_MAX_SSID_LEN + priv->mesh_ssid_len; | 
|  | cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie_val)); | 
|  | break; | 
|  | case CMD_ACT_MESH_CONFIG_STOP: | 
|  | break; | 
|  | default: | 
|  | return -1; | 
|  | } | 
|  | lbs_deb_cmd("mesh config action %d type %x channel %d SSID %s\n", | 
|  | action, priv->mesh_tlv, chan, | 
|  | print_ssid(ssid, priv->mesh_ssid, priv->mesh_ssid_len)); | 
|  |  | 
|  | return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /*************************************************************************** | 
|  | * Persistent configuration support | 
|  | */ | 
|  |  | 
|  | static int mesh_get_default_parameters(struct device *dev, | 
|  | struct mrvl_mesh_defaults *defs) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | struct cmd_ds_mesh_config cmd; | 
|  | int ret; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(struct cmd_ds_mesh_config)); | 
|  | ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_GET, | 
|  | CMD_TYPE_MESH_GET_DEFAULTS); | 
|  |  | 
|  | if (ret) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | memcpy(defs, &cmd.data[0], sizeof(struct mrvl_mesh_defaults)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bootflag_get - Get function for sysfs attribute bootflag | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer where data will be returned | 
|  | */ | 
|  | static ssize_t bootflag_get(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct mrvl_mesh_defaults defs; | 
|  | int ret; | 
|  |  | 
|  | ret = mesh_get_default_parameters(dev, &defs); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bootflag_set - Set function for sysfs attribute bootflag | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer that contains new attribute value | 
|  | * @count: size of buffer | 
|  | */ | 
|  | static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | struct cmd_ds_mesh_config cmd; | 
|  | uint32_t datum; | 
|  | int ret; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | ret = sscanf(buf, "%d", &datum); | 
|  | if ((ret != 1) || (datum > 1)) | 
|  | return -EINVAL; | 
|  |  | 
|  | *((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum); | 
|  | cmd.length = cpu_to_le16(sizeof(uint32_t)); | 
|  | ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET, | 
|  | CMD_TYPE_MESH_SET_BOOTFLAG); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * boottime_get - Get function for sysfs attribute boottime | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer where data will be returned | 
|  | */ | 
|  | static ssize_t boottime_get(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct mrvl_mesh_defaults defs; | 
|  | int ret; | 
|  |  | 
|  | ret = mesh_get_default_parameters(dev, &defs); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return snprintf(buf, 12, "%d\n", defs.boottime); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * boottime_set - Set function for sysfs attribute boottime | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer that contains new attribute value | 
|  | * @count: size of buffer | 
|  | */ | 
|  | static ssize_t boottime_set(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | struct cmd_ds_mesh_config cmd; | 
|  | uint32_t datum; | 
|  | int ret; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | ret = sscanf(buf, "%d", &datum); | 
|  | if ((ret != 1) || (datum > 255)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* A too small boot time will result in the device booting into | 
|  | * standalone (no-host) mode before the host can take control of it, | 
|  | * so the change will be hard to revert.  This may be a desired | 
|  | * feature (e.g to configure a very fast boot time for devices that | 
|  | * will not be attached to a host), but dangerous.  So I'm enforcing a | 
|  | * lower limit of 20 seconds:  remove and recompile the driver if this | 
|  | * does not work for you. | 
|  | */ | 
|  | datum = (datum < 20) ? 20 : datum; | 
|  | cmd.data[0] = datum; | 
|  | cmd.length = cpu_to_le16(sizeof(uint8_t)); | 
|  | ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET, | 
|  | CMD_TYPE_MESH_SET_BOOTTIME); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * channel_get - Get function for sysfs attribute channel | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer where data will be returned | 
|  | */ | 
|  | static ssize_t channel_get(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct mrvl_mesh_defaults defs; | 
|  | int ret; | 
|  |  | 
|  | ret = mesh_get_default_parameters(dev, &defs); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * channel_set - Set function for sysfs attribute channel | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer that contains new attribute value | 
|  | * @count: size of buffer | 
|  | */ | 
|  | static ssize_t channel_set(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | struct cmd_ds_mesh_config cmd; | 
|  | uint32_t datum; | 
|  | int ret; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | ret = sscanf(buf, "%d", &datum); | 
|  | if (ret != 1 || datum < 1 || datum > 11) | 
|  | return -EINVAL; | 
|  |  | 
|  | *((__le16 *)&cmd.data[0]) = cpu_to_le16(datum); | 
|  | cmd.length = cpu_to_le16(sizeof(uint16_t)); | 
|  | ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET, | 
|  | CMD_TYPE_MESH_SET_DEF_CHANNEL); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mesh_id_get - Get function for sysfs attribute mesh_id | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer where data will be returned | 
|  | */ | 
|  | static ssize_t mesh_id_get(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct mrvl_mesh_defaults defs; | 
|  | int ret; | 
|  |  | 
|  | ret = mesh_get_default_parameters(dev, &defs); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (defs.meshie.val.mesh_id_len > IEEE80211_MAX_SSID_LEN) { | 
|  | dev_err(dev, "inconsistent mesh ID length\n"); | 
|  | defs.meshie.val.mesh_id_len = IEEE80211_MAX_SSID_LEN; | 
|  | } | 
|  |  | 
|  | memcpy(buf, defs.meshie.val.mesh_id, defs.meshie.val.mesh_id_len); | 
|  | buf[defs.meshie.val.mesh_id_len] = '\n'; | 
|  | buf[defs.meshie.val.mesh_id_len + 1] = '\0'; | 
|  |  | 
|  | return defs.meshie.val.mesh_id_len + 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mesh_id_set - Set function for sysfs attribute mesh_id | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer that contains new attribute value | 
|  | * @count: size of buffer | 
|  | */ | 
|  | static ssize_t mesh_id_set(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct cmd_ds_mesh_config cmd; | 
|  | struct mrvl_mesh_defaults defs; | 
|  | struct mrvl_meshie *ie; | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | int len; | 
|  | int ret; | 
|  |  | 
|  | if (count < 2 || count > IEEE80211_MAX_SSID_LEN + 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(struct cmd_ds_mesh_config)); | 
|  | ie = (struct mrvl_meshie *) &cmd.data[0]; | 
|  |  | 
|  | /* fetch all other Information Element parameters */ | 
|  | ret = mesh_get_default_parameters(dev, &defs); | 
|  |  | 
|  | cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie)); | 
|  |  | 
|  | /* transfer IE elements */ | 
|  | memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie)); | 
|  |  | 
|  | len = count - 1; | 
|  | memcpy(ie->val.mesh_id, buf, len); | 
|  | /* SSID len */ | 
|  | ie->val.mesh_id_len = len; | 
|  | /* IE len */ | 
|  | ie->len = sizeof(struct mrvl_meshie_val) - IEEE80211_MAX_SSID_LEN + len; | 
|  |  | 
|  | ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET, | 
|  | CMD_TYPE_MESH_SET_MESH_IE); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * protocol_id_get - Get function for sysfs attribute protocol_id | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer where data will be returned | 
|  | */ | 
|  | static ssize_t protocol_id_get(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct mrvl_mesh_defaults defs; | 
|  | int ret; | 
|  |  | 
|  | ret = mesh_get_default_parameters(dev, &defs); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return snprintf(buf, 5, "%d\n", defs.meshie.val.active_protocol_id); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * protocol_id_set - Set function for sysfs attribute protocol_id | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer that contains new attribute value | 
|  | * @count: size of buffer | 
|  | */ | 
|  | static ssize_t protocol_id_set(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | struct cmd_ds_mesh_config cmd; | 
|  | struct mrvl_mesh_defaults defs; | 
|  | struct mrvl_meshie *ie; | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | uint32_t datum; | 
|  | int ret; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | ret = sscanf(buf, "%d", &datum); | 
|  | if ((ret != 1) || (datum > 255)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* fetch all other Information Element parameters */ | 
|  | ret = mesh_get_default_parameters(dev, &defs); | 
|  |  | 
|  | cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie)); | 
|  |  | 
|  | /* transfer IE elements */ | 
|  | ie = (struct mrvl_meshie *) &cmd.data[0]; | 
|  | memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie)); | 
|  | /* update protocol id */ | 
|  | ie->val.active_protocol_id = datum; | 
|  |  | 
|  | ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET, | 
|  | CMD_TYPE_MESH_SET_MESH_IE); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * metric_id_get - Get function for sysfs attribute metric_id | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer where data will be returned | 
|  | */ | 
|  | static ssize_t metric_id_get(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct mrvl_mesh_defaults defs; | 
|  | int ret; | 
|  |  | 
|  | ret = mesh_get_default_parameters(dev, &defs); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return snprintf(buf, 5, "%d\n", defs.meshie.val.active_metric_id); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * metric_id_set - Set function for sysfs attribute metric_id | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer that contains new attribute value | 
|  | * @count: size of buffer | 
|  | */ | 
|  | static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct cmd_ds_mesh_config cmd; | 
|  | struct mrvl_mesh_defaults defs; | 
|  | struct mrvl_meshie *ie; | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | uint32_t datum; | 
|  | int ret; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | ret = sscanf(buf, "%d", &datum); | 
|  | if ((ret != 1) || (datum > 255)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* fetch all other Information Element parameters */ | 
|  | ret = mesh_get_default_parameters(dev, &defs); | 
|  |  | 
|  | cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie)); | 
|  |  | 
|  | /* transfer IE elements */ | 
|  | ie = (struct mrvl_meshie *) &cmd.data[0]; | 
|  | memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie)); | 
|  | /* update metric id */ | 
|  | ie->val.active_metric_id = datum; | 
|  |  | 
|  | ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET, | 
|  | CMD_TYPE_MESH_SET_MESH_IE); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * capability_get - Get function for sysfs attribute capability | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer where data will be returned | 
|  | */ | 
|  | static ssize_t capability_get(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct mrvl_mesh_defaults defs; | 
|  | int ret; | 
|  |  | 
|  | ret = mesh_get_default_parameters(dev, &defs); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return snprintf(buf, 5, "%d\n", defs.meshie.val.mesh_capability); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * capability_set - Set function for sysfs attribute capability | 
|  | * @dev: the &struct device | 
|  | * @attr: device attributes | 
|  | * @buf: buffer that contains new attribute value | 
|  | * @count: size of buffer | 
|  | */ | 
|  | static ssize_t capability_set(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct cmd_ds_mesh_config cmd; | 
|  | struct mrvl_mesh_defaults defs; | 
|  | struct mrvl_meshie *ie; | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | uint32_t datum; | 
|  | int ret; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | ret = sscanf(buf, "%d", &datum); | 
|  | if ((ret != 1) || (datum > 255)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* fetch all other Information Element parameters */ | 
|  | ret = mesh_get_default_parameters(dev, &defs); | 
|  |  | 
|  | cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie)); | 
|  |  | 
|  | /* transfer IE elements */ | 
|  | ie = (struct mrvl_meshie *) &cmd.data[0]; | 
|  | memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie)); | 
|  | /* update value */ | 
|  | ie->val.mesh_capability = datum; | 
|  |  | 
|  | ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET, | 
|  | CMD_TYPE_MESH_SET_MESH_IE); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  |  | 
|  | static DEVICE_ATTR(bootflag, 0644, bootflag_get, bootflag_set); | 
|  | static DEVICE_ATTR(boottime, 0644, boottime_get, boottime_set); | 
|  | static DEVICE_ATTR(channel, 0644, channel_get, channel_set); | 
|  | static DEVICE_ATTR(mesh_id, 0644, mesh_id_get, mesh_id_set); | 
|  | static DEVICE_ATTR(protocol_id, 0644, protocol_id_get, protocol_id_set); | 
|  | static DEVICE_ATTR(metric_id, 0644, metric_id_get, metric_id_set); | 
|  | static DEVICE_ATTR(capability, 0644, capability_get, capability_set); | 
|  |  | 
|  | static struct attribute *boot_opts_attrs[] = { | 
|  | &dev_attr_bootflag.attr, | 
|  | &dev_attr_boottime.attr, | 
|  | &dev_attr_channel.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static struct attribute_group boot_opts_group = { | 
|  | .name = "boot_options", | 
|  | .attrs = boot_opts_attrs, | 
|  | }; | 
|  |  | 
|  | static struct attribute *mesh_ie_attrs[] = { | 
|  | &dev_attr_mesh_id.attr, | 
|  | &dev_attr_protocol_id.attr, | 
|  | &dev_attr_metric_id.attr, | 
|  | &dev_attr_capability.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static struct attribute_group mesh_ie_group = { | 
|  | .name = "mesh_ie", | 
|  | .attrs = mesh_ie_attrs, | 
|  | }; | 
|  |  | 
|  | void lbs_persist_config_init(struct net_device *dev) | 
|  | { | 
|  | int ret; | 
|  | ret = sysfs_create_group(&(dev->dev.kobj), &boot_opts_group); | 
|  | ret = sysfs_create_group(&(dev->dev.kobj), &mesh_ie_group); | 
|  | } | 
|  |  | 
|  | void lbs_persist_config_remove(struct net_device *dev) | 
|  | { | 
|  | sysfs_remove_group(&(dev->dev.kobj), &boot_opts_group); | 
|  | sysfs_remove_group(&(dev->dev.kobj), &mesh_ie_group); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /*************************************************************************** | 
|  | * Ethtool related | 
|  | */ | 
|  |  | 
|  | static const char *mesh_stat_strings[] = { | 
|  | "drop_duplicate_bcast", | 
|  | "drop_ttl_zero", | 
|  | "drop_no_fwd_route", | 
|  | "drop_no_buffers", | 
|  | "fwded_unicast_cnt", | 
|  | "fwded_bcast_cnt", | 
|  | "drop_blind_table", | 
|  | "tx_failed_cnt" | 
|  | }; | 
|  |  | 
|  | void lbs_mesh_ethtool_get_stats(struct net_device *dev, | 
|  | struct ethtool_stats *stats, uint64_t *data) | 
|  | { | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  | struct cmd_ds_mesh_access mesh_access; | 
|  | int ret; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_ETHTOOL); | 
|  |  | 
|  | /* Get Mesh Statistics */ | 
|  | ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_STATS, &mesh_access); | 
|  |  | 
|  | if (ret) { | 
|  | memset(data, 0, MESH_STATS_NUM*(sizeof(uint64_t))); | 
|  | return; | 
|  | } | 
|  |  | 
|  | priv->mstats.fwd_drop_rbt = le32_to_cpu(mesh_access.data[0]); | 
|  | priv->mstats.fwd_drop_ttl = le32_to_cpu(mesh_access.data[1]); | 
|  | priv->mstats.fwd_drop_noroute = le32_to_cpu(mesh_access.data[2]); | 
|  | priv->mstats.fwd_drop_nobuf = le32_to_cpu(mesh_access.data[3]); | 
|  | priv->mstats.fwd_unicast_cnt = le32_to_cpu(mesh_access.data[4]); | 
|  | priv->mstats.fwd_bcast_cnt = le32_to_cpu(mesh_access.data[5]); | 
|  | priv->mstats.drop_blind = le32_to_cpu(mesh_access.data[6]); | 
|  | priv->mstats.tx_failed_cnt = le32_to_cpu(mesh_access.data[7]); | 
|  |  | 
|  | data[0] = priv->mstats.fwd_drop_rbt; | 
|  | data[1] = priv->mstats.fwd_drop_ttl; | 
|  | data[2] = priv->mstats.fwd_drop_noroute; | 
|  | data[3] = priv->mstats.fwd_drop_nobuf; | 
|  | data[4] = priv->mstats.fwd_unicast_cnt; | 
|  | data[5] = priv->mstats.fwd_bcast_cnt; | 
|  | data[6] = priv->mstats.drop_blind; | 
|  | data[7] = priv->mstats.tx_failed_cnt; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_ETHTOOL); | 
|  | } | 
|  |  | 
|  | int lbs_mesh_ethtool_get_sset_count(struct net_device *dev, int sset) | 
|  | { | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  |  | 
|  | if (sset == ETH_SS_STATS && dev == priv->mesh_dev) | 
|  | return MESH_STATS_NUM; | 
|  |  | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | void lbs_mesh_ethtool_get_strings(struct net_device *dev, | 
|  | uint32_t stringset, uint8_t *s) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_ETHTOOL); | 
|  |  | 
|  | switch (stringset) { | 
|  | case ETH_SS_STATS: | 
|  | for (i = 0; i < MESH_STATS_NUM; i++) { | 
|  | memcpy(s + i * ETH_GSTRING_LEN, | 
|  | mesh_stat_strings[i], | 
|  | ETH_GSTRING_LEN); | 
|  | } | 
|  | break; | 
|  | } | 
|  | lbs_deb_enter(LBS_DEB_ETHTOOL); | 
|  | } |