|  | /* | 
|  | * EEPROM parser code for mac80211 Prism54 drivers | 
|  | * | 
|  | * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> | 
|  | * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> | 
|  | * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> | 
|  | * | 
|  | * Based on: | 
|  | * - the islsm (softmac prism54) driver, which is: | 
|  | *   Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. | 
|  | * - stlc45xx driver | 
|  | *   Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/firmware.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/sort.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <net/mac80211.h> | 
|  | #include <linux/crc-ccitt.h> | 
|  |  | 
|  | #include "p54.h" | 
|  | #include "eeprom.h" | 
|  | #include "lmac.h" | 
|  |  | 
|  | static struct ieee80211_rate p54_bgrates[] = { | 
|  | { .bitrate = 10, .hw_value = 0, }, | 
|  | { .bitrate = 20, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  | { .bitrate = 55, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  | { .bitrate = 110, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  | { .bitrate = 60, .hw_value = 4, }, | 
|  | { .bitrate = 90, .hw_value = 5, }, | 
|  | { .bitrate = 120, .hw_value = 6, }, | 
|  | { .bitrate = 180, .hw_value = 7, }, | 
|  | { .bitrate = 240, .hw_value = 8, }, | 
|  | { .bitrate = 360, .hw_value = 9, }, | 
|  | { .bitrate = 480, .hw_value = 10, }, | 
|  | { .bitrate = 540, .hw_value = 11, }, | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_rate p54_arates[] = { | 
|  | { .bitrate = 60, .hw_value = 4, }, | 
|  | { .bitrate = 90, .hw_value = 5, }, | 
|  | { .bitrate = 120, .hw_value = 6, }, | 
|  | { .bitrate = 180, .hw_value = 7, }, | 
|  | { .bitrate = 240, .hw_value = 8, }, | 
|  | { .bitrate = 360, .hw_value = 9, }, | 
|  | { .bitrate = 480, .hw_value = 10, }, | 
|  | { .bitrate = 540, .hw_value = 11, }, | 
|  | }; | 
|  |  | 
|  | static struct p54_rssi_db_entry p54_rssi_default = { | 
|  | /* | 
|  | * The defaults are taken from usb-logs of the | 
|  | * vendor driver. So, they should be safe to | 
|  | * use in case we can't get a match from the | 
|  | * rssi <-> dBm conversion database. | 
|  | */ | 
|  | .mul = 130, | 
|  | .add = -398, | 
|  | }; | 
|  |  | 
|  | #define CHAN_HAS_CAL		BIT(0) | 
|  | #define CHAN_HAS_LIMIT		BIT(1) | 
|  | #define CHAN_HAS_CURVE		BIT(2) | 
|  | #define CHAN_HAS_ALL		(CHAN_HAS_CAL | CHAN_HAS_LIMIT | CHAN_HAS_CURVE) | 
|  |  | 
|  | struct p54_channel_entry { | 
|  | u16 freq; | 
|  | u16 data; | 
|  | int index; | 
|  | enum ieee80211_band band; | 
|  | }; | 
|  |  | 
|  | struct p54_channel_list { | 
|  | struct p54_channel_entry *channels; | 
|  | size_t entries; | 
|  | size_t max_entries; | 
|  | size_t band_channel_num[IEEE80211_NUM_BANDS]; | 
|  | }; | 
|  |  | 
|  | static int p54_get_band_from_freq(u16 freq) | 
|  | { | 
|  | /* FIXME: sync these values with the 802.11 spec */ | 
|  |  | 
|  | if ((freq >= 2412) && (freq <= 2484)) | 
|  | return IEEE80211_BAND_2GHZ; | 
|  |  | 
|  | if ((freq >= 4920) && (freq <= 5825)) | 
|  | return IEEE80211_BAND_5GHZ; | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int same_band(u16 freq, u16 freq2) | 
|  | { | 
|  | return p54_get_band_from_freq(freq) == p54_get_band_from_freq(freq2); | 
|  | } | 
|  |  | 
|  | static int p54_compare_channels(const void *_a, | 
|  | const void *_b) | 
|  | { | 
|  | const struct p54_channel_entry *a = _a; | 
|  | const struct p54_channel_entry *b = _b; | 
|  |  | 
|  | return a->freq - b->freq; | 
|  | } | 
|  |  | 
|  | static int p54_compare_rssichan(const void *_a, | 
|  | const void *_b) | 
|  | { | 
|  | const struct p54_rssi_db_entry *a = _a; | 
|  | const struct p54_rssi_db_entry *b = _b; | 
|  |  | 
|  | return a->freq - b->freq; | 
|  | } | 
|  |  | 
|  | static int p54_fill_band_bitrates(struct ieee80211_hw *dev, | 
|  | struct ieee80211_supported_band *band_entry, | 
|  | enum ieee80211_band band) | 
|  | { | 
|  | /* TODO: generate rate array dynamically */ | 
|  |  | 
|  | switch (band) { | 
|  | case IEEE80211_BAND_2GHZ: | 
|  | band_entry->bitrates = p54_bgrates; | 
|  | band_entry->n_bitrates = ARRAY_SIZE(p54_bgrates); | 
|  | break; | 
|  | case IEEE80211_BAND_5GHZ: | 
|  | band_entry->bitrates = p54_arates; | 
|  | band_entry->n_bitrates = ARRAY_SIZE(p54_arates); | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int p54_generate_band(struct ieee80211_hw *dev, | 
|  | struct p54_channel_list *list, | 
|  | enum ieee80211_band band) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct ieee80211_supported_band *tmp, *old; | 
|  | unsigned int i, j; | 
|  | int ret = -ENOMEM; | 
|  |  | 
|  | if ((!list->entries) || (!list->band_channel_num[band])) | 
|  | return -EINVAL; | 
|  |  | 
|  | tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); | 
|  | if (!tmp) | 
|  | goto err_out; | 
|  |  | 
|  | tmp->channels = kzalloc(sizeof(struct ieee80211_channel) * | 
|  | list->band_channel_num[band], GFP_KERNEL); | 
|  | if (!tmp->channels) | 
|  | goto err_out; | 
|  |  | 
|  | ret = p54_fill_band_bitrates(dev, tmp, band); | 
|  | if (ret) | 
|  | goto err_out; | 
|  |  | 
|  | for (i = 0, j = 0; (j < list->band_channel_num[band]) && | 
|  | (i < list->entries); i++) { | 
|  | struct p54_channel_entry *chan = &list->channels[i]; | 
|  |  | 
|  | if (chan->band != band) | 
|  | continue; | 
|  |  | 
|  | if (chan->data != CHAN_HAS_ALL) { | 
|  | wiphy_err(dev->wiphy, "%s%s%s is/are missing for " | 
|  | "channel:%d [%d MHz].\n", | 
|  | (chan->data & CHAN_HAS_CAL ? "" : | 
|  | " [iqauto calibration data]"), | 
|  | (chan->data & CHAN_HAS_LIMIT ? "" : | 
|  | " [output power limits]"), | 
|  | (chan->data & CHAN_HAS_CURVE ? "" : | 
|  | " [curve data]"), | 
|  | chan->index, chan->freq); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | tmp->channels[j].band = chan->band; | 
|  | tmp->channels[j].center_freq = chan->freq; | 
|  | j++; | 
|  | } | 
|  |  | 
|  | if (j == 0) { | 
|  | wiphy_err(dev->wiphy, "Disabling totally damaged %d GHz band\n", | 
|  | (band == IEEE80211_BAND_2GHZ) ? 2 : 5); | 
|  |  | 
|  | ret = -ENODATA; | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | tmp->n_channels = j; | 
|  | old = priv->band_table[band]; | 
|  | priv->band_table[band] = tmp; | 
|  | if (old) { | 
|  | kfree(old->channels); | 
|  | kfree(old); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_out: | 
|  | if (tmp) { | 
|  | kfree(tmp->channels); | 
|  | kfree(tmp); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void p54_update_channel_param(struct p54_channel_list *list, | 
|  | u16 freq, u16 data) | 
|  | { | 
|  | int band, i; | 
|  |  | 
|  | /* | 
|  | * usually all lists in the eeprom are mostly sorted. | 
|  | * so it's very likely that the entry we are looking for | 
|  | * is right at the end of the list | 
|  | */ | 
|  | for (i = list->entries; i >= 0; i--) { | 
|  | if (freq == list->channels[i].freq) { | 
|  | list->channels[i].data |= data; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((i < 0) && (list->entries < list->max_entries)) { | 
|  | /* entry does not exist yet. Initialize a new one. */ | 
|  | band = p54_get_band_from_freq(freq); | 
|  |  | 
|  | /* | 
|  | * filter out frequencies which don't belong into | 
|  | * any supported band. | 
|  | */ | 
|  | if (band < 0) | 
|  | return ; | 
|  |  | 
|  | i = list->entries++; | 
|  | list->band_channel_num[band]++; | 
|  |  | 
|  | list->channels[i].freq = freq; | 
|  | list->channels[i].data = data; | 
|  | list->channels[i].band = band; | 
|  | list->channels[i].index = ieee80211_frequency_to_channel(freq); | 
|  | /* TODO: parse output_limit and fill max_power */ | 
|  | } | 
|  | } | 
|  |  | 
|  | static int p54_generate_channel_lists(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct p54_channel_list *list; | 
|  | unsigned int i, j, max_channel_num; | 
|  | int ret = 0; | 
|  | u16 freq; | 
|  |  | 
|  | if ((priv->iq_autocal_len != priv->curve_data->entries) || | 
|  | (priv->iq_autocal_len != priv->output_limit->entries)) | 
|  | wiphy_err(dev->wiphy, | 
|  | "Unsupported or damaged EEPROM detected. " | 
|  | "You may not be able to use all channels.\n"); | 
|  |  | 
|  | max_channel_num = max_t(unsigned int, priv->output_limit->entries, | 
|  | priv->iq_autocal_len); | 
|  | max_channel_num = max_t(unsigned int, max_channel_num, | 
|  | priv->curve_data->entries); | 
|  |  | 
|  | list = kzalloc(sizeof(*list), GFP_KERNEL); | 
|  | if (!list) { | 
|  | ret = -ENOMEM; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | list->max_entries = max_channel_num; | 
|  | list->channels = kzalloc(sizeof(struct p54_channel_entry) * | 
|  | max_channel_num, GFP_KERNEL); | 
|  | if (!list->channels) { | 
|  | ret = -ENOMEM; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < max_channel_num; i++) { | 
|  | if (i < priv->iq_autocal_len) { | 
|  | freq = le16_to_cpu(priv->iq_autocal[i].freq); | 
|  | p54_update_channel_param(list, freq, CHAN_HAS_CAL); | 
|  | } | 
|  |  | 
|  | if (i < priv->output_limit->entries) { | 
|  | freq = le16_to_cpup((__le16 *) (i * | 
|  | priv->output_limit->entry_size + | 
|  | priv->output_limit->offset + | 
|  | priv->output_limit->data)); | 
|  |  | 
|  | p54_update_channel_param(list, freq, CHAN_HAS_LIMIT); | 
|  | } | 
|  |  | 
|  | if (i < priv->curve_data->entries) { | 
|  | freq = le16_to_cpup((__le16 *) (i * | 
|  | priv->curve_data->entry_size + | 
|  | priv->curve_data->offset + | 
|  | priv->curve_data->data)); | 
|  |  | 
|  | p54_update_channel_param(list, freq, CHAN_HAS_CURVE); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* sort the channel list by frequency */ | 
|  | sort(list->channels, list->entries, sizeof(struct p54_channel_entry), | 
|  | p54_compare_channels, NULL); | 
|  |  | 
|  | for (i = 0, j = 0; i < IEEE80211_NUM_BANDS; i++) { | 
|  | if (p54_generate_band(dev, list, i) == 0) | 
|  | j++; | 
|  | } | 
|  | if (j == 0) { | 
|  | /* no useable band available. */ | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | free: | 
|  | if (list) { | 
|  | kfree(list->channels); | 
|  | kfree(list); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int p54_convert_rev0(struct ieee80211_hw *dev, | 
|  | struct pda_pa_curve_data *curve_data) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct p54_pa_curve_data_sample *dst; | 
|  | struct pda_pa_curve_data_sample_rev0 *src; | 
|  | size_t cd_len = sizeof(*curve_data) + | 
|  | (curve_data->points_per_channel*sizeof(*dst) + 2) * | 
|  | curve_data->channels; | 
|  | unsigned int i, j; | 
|  | void *source, *target; | 
|  |  | 
|  | priv->curve_data = kmalloc(sizeof(*priv->curve_data) + cd_len, | 
|  | GFP_KERNEL); | 
|  | if (!priv->curve_data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | priv->curve_data->entries = curve_data->channels; | 
|  | priv->curve_data->entry_size = sizeof(__le16) + | 
|  | sizeof(*dst) * curve_data->points_per_channel; | 
|  | priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data); | 
|  | priv->curve_data->len = cd_len; | 
|  | memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data)); | 
|  | source = curve_data->data; | 
|  | target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data; | 
|  | for (i = 0; i < curve_data->channels; i++) { | 
|  | __le16 *freq = source; | 
|  | source += sizeof(__le16); | 
|  | *((__le16 *)target) = *freq; | 
|  | target += sizeof(__le16); | 
|  | for (j = 0; j < curve_data->points_per_channel; j++) { | 
|  | dst = target; | 
|  | src = source; | 
|  |  | 
|  | dst->rf_power = src->rf_power; | 
|  | dst->pa_detector = src->pa_detector; | 
|  | dst->data_64qam = src->pcv; | 
|  | /* "invent" the points for the other modulations */ | 
|  | #define SUB(x, y) (u8)(((x) - (y)) > (x) ? 0 : (x) - (y)) | 
|  | dst->data_16qam = SUB(src->pcv, 12); | 
|  | dst->data_qpsk = SUB(dst->data_16qam, 12); | 
|  | dst->data_bpsk = SUB(dst->data_qpsk, 12); | 
|  | dst->data_barker = SUB(dst->data_bpsk, 14); | 
|  | #undef SUB | 
|  | target += sizeof(*dst); | 
|  | source += sizeof(*src); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int p54_convert_rev1(struct ieee80211_hw *dev, | 
|  | struct pda_pa_curve_data *curve_data) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct p54_pa_curve_data_sample *dst; | 
|  | struct pda_pa_curve_data_sample_rev1 *src; | 
|  | size_t cd_len = sizeof(*curve_data) + | 
|  | (curve_data->points_per_channel*sizeof(*dst) + 2) * | 
|  | curve_data->channels; | 
|  | unsigned int i, j; | 
|  | void *source, *target; | 
|  |  | 
|  | priv->curve_data = kzalloc(cd_len + sizeof(*priv->curve_data), | 
|  | GFP_KERNEL); | 
|  | if (!priv->curve_data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | priv->curve_data->entries = curve_data->channels; | 
|  | priv->curve_data->entry_size = sizeof(__le16) + | 
|  | sizeof(*dst) * curve_data->points_per_channel; | 
|  | priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data); | 
|  | priv->curve_data->len = cd_len; | 
|  | memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data)); | 
|  | source = curve_data->data; | 
|  | target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data; | 
|  | for (i = 0; i < curve_data->channels; i++) { | 
|  | __le16 *freq = source; | 
|  | source += sizeof(__le16); | 
|  | *((__le16 *)target) = *freq; | 
|  | target += sizeof(__le16); | 
|  | for (j = 0; j < curve_data->points_per_channel; j++) { | 
|  | memcpy(target, source, sizeof(*src)); | 
|  |  | 
|  | target += sizeof(*dst); | 
|  | source += sizeof(*src); | 
|  | } | 
|  | source++; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const char *p54_rf_chips[] = { "INVALID-0", "Duette3", "Duette2", | 
|  | "Frisbee", "Xbow", "Longbow", "INVALID-6", "INVALID-7" }; | 
|  |  | 
|  | static int p54_parse_rssical(struct ieee80211_hw *dev, | 
|  | u8 *data, int len, u16 type) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct p54_rssi_db_entry *entry; | 
|  | size_t db_len, entries; | 
|  | int offset = 0, i; | 
|  |  | 
|  | if (type != PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) { | 
|  | entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2; | 
|  | if (len != sizeof(struct pda_rssi_cal_entry) * entries) { | 
|  | wiphy_err(dev->wiphy, "rssical size mismatch.\n"); | 
|  | goto err_data; | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * Some devices (Dell 1450 USB, Xbow 5GHz card, etc...) | 
|  | * have an empty two byte header. | 
|  | */ | 
|  | if (*((__le16 *)&data[offset]) == cpu_to_le16(0)) | 
|  | offset += 2; | 
|  |  | 
|  | entries = (len - offset) / | 
|  | sizeof(struct pda_rssi_cal_ext_entry); | 
|  |  | 
|  | if ((len - offset) % sizeof(struct pda_rssi_cal_ext_entry) || | 
|  | entries <= 0) { | 
|  | wiphy_err(dev->wiphy, "invalid rssi database.\n"); | 
|  | goto err_data; | 
|  | } | 
|  | } | 
|  |  | 
|  | db_len = sizeof(*entry) * entries; | 
|  | priv->rssi_db = kzalloc(db_len + sizeof(*priv->rssi_db), GFP_KERNEL); | 
|  | if (!priv->rssi_db) | 
|  | return -ENOMEM; | 
|  |  | 
|  | priv->rssi_db->offset = 0; | 
|  | priv->rssi_db->entries = entries; | 
|  | priv->rssi_db->entry_size = sizeof(*entry); | 
|  | priv->rssi_db->len = db_len; | 
|  |  | 
|  | entry = (void *)((unsigned long)priv->rssi_db->data + priv->rssi_db->offset); | 
|  | if (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) { | 
|  | struct pda_rssi_cal_ext_entry *cal = (void *) &data[offset]; | 
|  |  | 
|  | for (i = 0; i < entries; i++) { | 
|  | entry[i].freq = le16_to_cpu(cal[i].freq); | 
|  | entry[i].mul = (s16) le16_to_cpu(cal[i].mul); | 
|  | entry[i].add = (s16) le16_to_cpu(cal[i].add); | 
|  | } | 
|  | } else { | 
|  | struct pda_rssi_cal_entry *cal = (void *) &data[offset]; | 
|  |  | 
|  | for (i = 0; i < entries; i++) { | 
|  | u16 freq = 0; | 
|  | switch (i) { | 
|  | case IEEE80211_BAND_2GHZ: | 
|  | freq = 2437; | 
|  | break; | 
|  | case IEEE80211_BAND_5GHZ: | 
|  | freq = 5240; | 
|  | break; | 
|  | } | 
|  |  | 
|  | entry[i].freq = freq; | 
|  | entry[i].mul = (s16) le16_to_cpu(cal[i].mul); | 
|  | entry[i].add = (s16) le16_to_cpu(cal[i].add); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* sort the list by channel frequency */ | 
|  | sort(entry, entries, sizeof(*entry), p54_compare_rssichan, NULL); | 
|  | return 0; | 
|  |  | 
|  | err_data: | 
|  | wiphy_err(dev->wiphy, | 
|  | "rssi calibration data packing type:(%x) len:%d.\n", | 
|  | type, len); | 
|  |  | 
|  | print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE, data, len); | 
|  |  | 
|  | wiphy_err(dev->wiphy, "please report this issue.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | struct p54_rssi_db_entry *p54_rssi_find(struct p54_common *priv, const u16 freq) | 
|  | { | 
|  | struct p54_rssi_db_entry *entry; | 
|  | int i, found = -1; | 
|  |  | 
|  | if (!priv->rssi_db) | 
|  | return &p54_rssi_default; | 
|  |  | 
|  | entry = (void *)(priv->rssi_db->data + priv->rssi_db->offset); | 
|  | for (i = 0; i < priv->rssi_db->entries; i++) { | 
|  | if (!same_band(freq, entry[i].freq)) | 
|  | continue; | 
|  |  | 
|  | if (found == -1) { | 
|  | found = i; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* nearest match */ | 
|  | if (abs(freq - entry[i].freq) < | 
|  | abs(freq - entry[found].freq)) { | 
|  | found = i; | 
|  | continue; | 
|  | } else { | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return found < 0 ? &p54_rssi_default : &entry[found]; | 
|  | } | 
|  |  | 
|  | static void p54_parse_default_country(struct ieee80211_hw *dev, | 
|  | void *data, int len) | 
|  | { | 
|  | struct pda_country *country; | 
|  |  | 
|  | if (len != sizeof(*country)) { | 
|  | wiphy_err(dev->wiphy, | 
|  | "found possible invalid default country eeprom entry. (entry size: %d)\n", | 
|  | len); | 
|  |  | 
|  | print_hex_dump_bytes("country:", DUMP_PREFIX_NONE, | 
|  | data, len); | 
|  |  | 
|  | wiphy_err(dev->wiphy, "please report this issue.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | country = (struct pda_country *) data; | 
|  | if (country->flags == PDR_COUNTRY_CERT_CODE_PSEUDO) | 
|  | regulatory_hint(dev->wiphy, country->alpha2); | 
|  | else { | 
|  | /* TODO: | 
|  | * write a shared/common function that converts | 
|  | * "Regulatory domain codes" (802.11-2007 14.8.2.2) | 
|  | * into ISO/IEC 3166-1 alpha2 for regulatory_hint. | 
|  | */ | 
|  | } | 
|  | } | 
|  |  | 
|  | static int p54_convert_output_limits(struct ieee80211_hw *dev, | 
|  | u8 *data, size_t len) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  |  | 
|  | if (len < 2) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (data[0] != 0) { | 
|  | wiphy_err(dev->wiphy, "unknown output power db revision:%x\n", | 
|  | data[0]); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (2 + data[1] * sizeof(struct pda_channel_output_limit) > len) | 
|  | return -EINVAL; | 
|  |  | 
|  | priv->output_limit = kmalloc(data[1] * | 
|  | sizeof(struct pda_channel_output_limit) + | 
|  | sizeof(*priv->output_limit), GFP_KERNEL); | 
|  |  | 
|  | if (!priv->output_limit) | 
|  | return -ENOMEM; | 
|  |  | 
|  | priv->output_limit->offset = 0; | 
|  | priv->output_limit->entries = data[1]; | 
|  | priv->output_limit->entry_size = | 
|  | sizeof(struct pda_channel_output_limit); | 
|  | priv->output_limit->len = priv->output_limit->entry_size * | 
|  | priv->output_limit->entries + | 
|  | priv->output_limit->offset; | 
|  |  | 
|  | memcpy(priv->output_limit->data, &data[2], | 
|  | data[1] * sizeof(struct pda_channel_output_limit)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct p54_cal_database *p54_convert_db(struct pda_custom_wrapper *src, | 
|  | size_t total_len) | 
|  | { | 
|  | struct p54_cal_database *dst; | 
|  | size_t payload_len, entries, entry_size, offset; | 
|  |  | 
|  | payload_len = le16_to_cpu(src->len); | 
|  | entries = le16_to_cpu(src->entries); | 
|  | entry_size = le16_to_cpu(src->entry_size); | 
|  | offset = le16_to_cpu(src->offset); | 
|  | if (((entries * entry_size + offset) != payload_len) || | 
|  | (payload_len + sizeof(*src) != total_len)) | 
|  | return NULL; | 
|  |  | 
|  | dst = kmalloc(sizeof(*dst) + payload_len, GFP_KERNEL); | 
|  | if (!dst) | 
|  | return NULL; | 
|  |  | 
|  | dst->entries = entries; | 
|  | dst->entry_size = entry_size; | 
|  | dst->offset = offset; | 
|  | dst->len = payload_len; | 
|  |  | 
|  | memcpy(dst->data, src->data, payload_len); | 
|  | return dst; | 
|  | } | 
|  |  | 
|  | int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct eeprom_pda_wrap *wrap; | 
|  | struct pda_entry *entry; | 
|  | unsigned int data_len, entry_len; | 
|  | void *tmp; | 
|  | int err; | 
|  | u8 *end = (u8 *)eeprom + len; | 
|  | u16 synth = 0; | 
|  | u16 crc16 = ~0; | 
|  |  | 
|  | wrap = (struct eeprom_pda_wrap *) eeprom; | 
|  | entry = (void *)wrap->data + le16_to_cpu(wrap->len); | 
|  |  | 
|  | /* verify that at least the entry length/code fits */ | 
|  | while ((u8 *)entry <= end - sizeof(*entry)) { | 
|  | entry_len = le16_to_cpu(entry->len); | 
|  | data_len = ((entry_len - 1) << 1); | 
|  |  | 
|  | /* abort if entry exceeds whole structure */ | 
|  | if ((u8 *)entry + sizeof(*entry) + data_len > end) | 
|  | break; | 
|  |  | 
|  | switch (le16_to_cpu(entry->code)) { | 
|  | case PDR_MAC_ADDRESS: | 
|  | if (data_len != ETH_ALEN) | 
|  | break; | 
|  | SET_IEEE80211_PERM_ADDR(dev, entry->data); | 
|  | break; | 
|  | case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS: | 
|  | if (priv->output_limit) | 
|  | break; | 
|  | err = p54_convert_output_limits(dev, entry->data, | 
|  | data_len); | 
|  | if (err) | 
|  | goto err; | 
|  | break; | 
|  | case PDR_PRISM_PA_CAL_CURVE_DATA: { | 
|  | struct pda_pa_curve_data *curve_data = | 
|  | (struct pda_pa_curve_data *)entry->data; | 
|  | if (data_len < sizeof(*curve_data)) { | 
|  | err = -EINVAL; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | switch (curve_data->cal_method_rev) { | 
|  | case 0: | 
|  | err = p54_convert_rev0(dev, curve_data); | 
|  | break; | 
|  | case 1: | 
|  | err = p54_convert_rev1(dev, curve_data); | 
|  | break; | 
|  | default: | 
|  | wiphy_err(dev->wiphy, | 
|  | "unknown curve data revision %d\n", | 
|  | curve_data->cal_method_rev); | 
|  | err = -ENODEV; | 
|  | break; | 
|  | } | 
|  | if (err) | 
|  | goto err; | 
|  | } | 
|  | break; | 
|  | case PDR_PRISM_ZIF_TX_IQ_CALIBRATION: | 
|  | priv->iq_autocal = kmemdup(entry->data, data_len, | 
|  | GFP_KERNEL); | 
|  | if (!priv->iq_autocal) { | 
|  | err = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry); | 
|  | break; | 
|  | case PDR_DEFAULT_COUNTRY: | 
|  | p54_parse_default_country(dev, entry->data, data_len); | 
|  | break; | 
|  | case PDR_INTERFACE_LIST: | 
|  | tmp = entry->data; | 
|  | while ((u8 *)tmp < entry->data + data_len) { | 
|  | struct exp_if *exp_if = tmp; | 
|  | if (exp_if->if_id == cpu_to_le16(IF_ID_ISL39000)) | 
|  | synth = le16_to_cpu(exp_if->variant); | 
|  | tmp += sizeof(*exp_if); | 
|  | } | 
|  | break; | 
|  | case PDR_HARDWARE_PLATFORM_COMPONENT_ID: | 
|  | if (data_len < 2) | 
|  | break; | 
|  | priv->version = *(u8 *)(entry->data + 1); | 
|  | break; | 
|  | case PDR_RSSI_LINEAR_APPROXIMATION: | 
|  | case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND: | 
|  | case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED: | 
|  | err = p54_parse_rssical(dev, entry->data, data_len, | 
|  | le16_to_cpu(entry->code)); | 
|  | if (err) | 
|  | goto err; | 
|  | break; | 
|  | case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2: { | 
|  | struct pda_custom_wrapper *pda = (void *) entry->data; | 
|  | __le16 *src; | 
|  | u16 *dst; | 
|  | int i; | 
|  |  | 
|  | if (priv->rssi_db || data_len < sizeof(*pda)) | 
|  | break; | 
|  |  | 
|  | priv->rssi_db = p54_convert_db(pda, data_len); | 
|  | if (!priv->rssi_db) | 
|  | break; | 
|  |  | 
|  | src = (void *) priv->rssi_db->data; | 
|  | dst = (void *) priv->rssi_db->data; | 
|  |  | 
|  | for (i = 0; i < priv->rssi_db->entries; i++) | 
|  | *(dst++) = (s16) le16_to_cpu(*(src++)); | 
|  |  | 
|  | } | 
|  | break; | 
|  | case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM: { | 
|  | struct pda_custom_wrapper *pda = (void *) entry->data; | 
|  | if (priv->output_limit || data_len < sizeof(*pda)) | 
|  | break; | 
|  | priv->output_limit = p54_convert_db(pda, data_len); | 
|  | } | 
|  | break; | 
|  | case PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM: { | 
|  | struct pda_custom_wrapper *pda = (void *) entry->data; | 
|  | if (priv->curve_data || data_len < sizeof(*pda)) | 
|  | break; | 
|  | priv->curve_data = p54_convert_db(pda, data_len); | 
|  | } | 
|  | break; | 
|  | case PDR_END: | 
|  | crc16 = ~crc_ccitt(crc16, (u8 *) entry, sizeof(*entry)); | 
|  | if (crc16 != le16_to_cpup((__le16 *)entry->data)) { | 
|  | wiphy_err(dev->wiphy, "eeprom failed checksum " | 
|  | "test!\n"); | 
|  | err = -ENOMSG; | 
|  | goto err; | 
|  | } else { | 
|  | goto good_eeprom; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | crc16 = crc_ccitt(crc16, (u8 *)entry, (entry_len + 1) * 2); | 
|  | entry = (void *)entry + (entry_len + 1) * 2; | 
|  | } | 
|  |  | 
|  | wiphy_err(dev->wiphy, "unexpected end of eeprom data.\n"); | 
|  | err = -ENODATA; | 
|  | goto err; | 
|  |  | 
|  | good_eeprom: | 
|  | if (!synth || !priv->iq_autocal || !priv->output_limit || | 
|  | !priv->curve_data) { | 
|  | wiphy_err(dev->wiphy, | 
|  | "not all required entries found in eeprom!\n"); | 
|  | err = -EINVAL; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | err = p54_generate_channel_lists(dev); | 
|  | if (err) | 
|  | goto err; | 
|  |  | 
|  | priv->rxhw = synth & PDR_SYNTH_FRONTEND_MASK; | 
|  | if (priv->rxhw == PDR_SYNTH_FRONTEND_XBOW) | 
|  | p54_init_xbow_synth(priv); | 
|  | if (!(synth & PDR_SYNTH_24_GHZ_DISABLED)) | 
|  | dev->wiphy->bands[IEEE80211_BAND_2GHZ] = | 
|  | priv->band_table[IEEE80211_BAND_2GHZ]; | 
|  | if (!(synth & PDR_SYNTH_5_GHZ_DISABLED)) | 
|  | dev->wiphy->bands[IEEE80211_BAND_5GHZ] = | 
|  | priv->band_table[IEEE80211_BAND_5GHZ]; | 
|  | if ((synth & PDR_SYNTH_RX_DIV_MASK) == PDR_SYNTH_RX_DIV_SUPPORTED) | 
|  | priv->rx_diversity_mask = 3; | 
|  | if ((synth & PDR_SYNTH_TX_DIV_MASK) == PDR_SYNTH_TX_DIV_SUPPORTED) | 
|  | priv->tx_diversity_mask = 3; | 
|  |  | 
|  | if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { | 
|  | u8 perm_addr[ETH_ALEN]; | 
|  |  | 
|  | wiphy_warn(dev->wiphy, | 
|  | "Invalid hwaddr! Using randomly generated MAC addr\n"); | 
|  | random_ether_addr(perm_addr); | 
|  | SET_IEEE80211_PERM_ADDR(dev, perm_addr); | 
|  | } | 
|  |  | 
|  | priv->cur_rssi = &p54_rssi_default; | 
|  |  | 
|  | wiphy_info(dev->wiphy, "hwaddr %pM, MAC:isl38%02x RF:%s\n", | 
|  | dev->wiphy->perm_addr, priv->version, | 
|  | p54_rf_chips[priv->rxhw]); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | kfree(priv->iq_autocal); | 
|  | kfree(priv->output_limit); | 
|  | kfree(priv->curve_data); | 
|  | kfree(priv->rssi_db); | 
|  | priv->iq_autocal = NULL; | 
|  | priv->output_limit = NULL; | 
|  | priv->curve_data = NULL; | 
|  | priv->rssi_db = NULL; | 
|  |  | 
|  | wiphy_err(dev->wiphy, "eeprom parse failed!\n"); | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(p54_parse_eeprom); | 
|  |  | 
|  | int p54_read_eeprom(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | size_t eeprom_size = 0x2020, offset = 0, blocksize, maxblocksize; | 
|  | int ret = -ENOMEM; | 
|  | void *eeprom; | 
|  |  | 
|  | maxblocksize = EEPROM_READBACK_LEN; | 
|  | if (priv->fw_var >= 0x509) | 
|  | maxblocksize -= 0xc; | 
|  | else | 
|  | maxblocksize -= 0x4; | 
|  |  | 
|  | eeprom = kzalloc(eeprom_size, GFP_KERNEL); | 
|  | if (unlikely(!eeprom)) | 
|  | goto free; | 
|  |  | 
|  | while (eeprom_size) { | 
|  | blocksize = min(eeprom_size, maxblocksize); | 
|  | ret = p54_download_eeprom(priv, (void *) (eeprom + offset), | 
|  | offset, blocksize); | 
|  | if (unlikely(ret)) | 
|  | goto free; | 
|  |  | 
|  | offset += blocksize; | 
|  | eeprom_size -= blocksize; | 
|  | } | 
|  |  | 
|  | ret = p54_parse_eeprom(dev, eeprom, offset); | 
|  | free: | 
|  | kfree(eeprom); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(p54_read_eeprom); |