|  | /* | 
|  | * Common code for mac80211 Prism54 drivers | 
|  | * | 
|  | * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> | 
|  | * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> | 
|  | * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> | 
|  | * | 
|  | * Based on: | 
|  | * - the islsm (softmac prism54) driver, which is: | 
|  | *   Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. | 
|  | * - stlc45xx driver | 
|  | *   Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/firmware.h> | 
|  | #include <linux/etherdevice.h> | 
|  |  | 
|  | #include <net/mac80211.h> | 
|  |  | 
|  | #include "p54.h" | 
|  | #include "lmac.h" | 
|  |  | 
|  | #ifdef P54_MM_DEBUG | 
|  | static void p54_dump_tx_queue(struct p54_common *priv) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct p54_tx_info *range; | 
|  | struct sk_buff *skb; | 
|  | struct p54_hdr *hdr; | 
|  | unsigned int i = 0; | 
|  | u32 prev_addr; | 
|  | u32 largest_hole = 0, free; | 
|  |  | 
|  | spin_lock_irqsave(&priv->tx_queue.lock, flags); | 
|  | wiphy_debug(priv->hw->wiphy, "/ --- tx queue dump (%d entries) ---\n", | 
|  | skb_queue_len(&priv->tx_queue)); | 
|  |  | 
|  | prev_addr = priv->rx_start; | 
|  | skb_queue_walk(&priv->tx_queue, skb) { | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | range = (void *) info->rate_driver_data; | 
|  | hdr = (void *) skb->data; | 
|  |  | 
|  | free = range->start_addr - prev_addr; | 
|  | wiphy_debug(priv->hw->wiphy, | 
|  | "| [%02d] => [skb:%p skb_len:0x%04x " | 
|  | "hdr:{flags:%02x len:%04x req_id:%04x type:%02x} " | 
|  | "mem:{start:%04x end:%04x, free:%d}]\n", | 
|  | i++, skb, skb->len, | 
|  | le16_to_cpu(hdr->flags), le16_to_cpu(hdr->len), | 
|  | le32_to_cpu(hdr->req_id), le16_to_cpu(hdr->type), | 
|  | range->start_addr, range->end_addr, free); | 
|  |  | 
|  | prev_addr = range->end_addr; | 
|  | largest_hole = max(largest_hole, free); | 
|  | } | 
|  | free = priv->rx_end - prev_addr; | 
|  | largest_hole = max(largest_hole, free); | 
|  | wiphy_debug(priv->hw->wiphy, | 
|  | "\\ --- [free: %d], largest free block: %d ---\n", | 
|  | free, largest_hole); | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  | } | 
|  | #endif /* P54_MM_DEBUG */ | 
|  |  | 
|  | /* | 
|  | * So, the firmware is somewhat stupid and doesn't know what places in its | 
|  | * memory incoming data should go to. By poking around in the firmware, we | 
|  | * can find some unused memory to upload our packets to. However, data that we | 
|  | * want the card to TX needs to stay intact until the card has told us that | 
|  | * it is done with it. This function finds empty places we can upload to and | 
|  | * marks allocated areas as reserved if necessary. p54_find_and_unlink_skb or | 
|  | * p54_free_skb frees allocated areas. | 
|  | */ | 
|  | static int p54_assign_address(struct p54_common *priv, struct sk_buff *skb) | 
|  | { | 
|  | struct sk_buff *entry, *target_skb = NULL; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct p54_tx_info *range; | 
|  | struct p54_hdr *data = (void *) skb->data; | 
|  | unsigned long flags; | 
|  | u32 last_addr = priv->rx_start; | 
|  | u32 target_addr = priv->rx_start; | 
|  | u16 len = priv->headroom + skb->len + priv->tailroom + 3; | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | range = (void *) info->rate_driver_data; | 
|  | len = (range->extra_len + len) & ~0x3; | 
|  |  | 
|  | spin_lock_irqsave(&priv->tx_queue.lock, flags); | 
|  | if (unlikely(skb_queue_len(&priv->tx_queue) == 32)) { | 
|  | /* | 
|  | * The tx_queue is now really full. | 
|  | * | 
|  | * TODO: check if the device has crashed and reset it. | 
|  | */ | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | skb_queue_walk(&priv->tx_queue, entry) { | 
|  | u32 hole_size; | 
|  | info = IEEE80211_SKB_CB(entry); | 
|  | range = (void *) info->rate_driver_data; | 
|  | hole_size = range->start_addr - last_addr; | 
|  |  | 
|  | if (!target_skb && hole_size >= len) { | 
|  | target_skb = entry->prev; | 
|  | hole_size -= len; | 
|  | target_addr = last_addr; | 
|  | break; | 
|  | } | 
|  | last_addr = range->end_addr; | 
|  | } | 
|  | if (unlikely(!target_skb)) { | 
|  | if (priv->rx_end - last_addr >= len) { | 
|  | target_skb = priv->tx_queue.prev; | 
|  | if (!skb_queue_empty(&priv->tx_queue)) { | 
|  | info = IEEE80211_SKB_CB(target_skb); | 
|  | range = (void *)info->rate_driver_data; | 
|  | target_addr = range->end_addr; | 
|  | } | 
|  | } else { | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  | return -ENOSPC; | 
|  | } | 
|  | } | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | range = (void *) info->rate_driver_data; | 
|  | range->start_addr = target_addr; | 
|  | range->end_addr = target_addr + len; | 
|  | data->req_id = cpu_to_le32(target_addr + priv->headroom); | 
|  | if (IS_DATA_FRAME(skb) && | 
|  | unlikely(GET_HW_QUEUE(skb) == P54_QUEUE_BEACON)) | 
|  | priv->beacon_req_id = data->req_id; | 
|  |  | 
|  | __skb_queue_after(&priv->tx_queue, target_skb, skb); | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void p54_tx_pending(struct p54_common *priv) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | int ret; | 
|  |  | 
|  | skb = skb_dequeue(&priv->tx_pending); | 
|  | if (unlikely(!skb)) | 
|  | return ; | 
|  |  | 
|  | ret = p54_assign_address(priv, skb); | 
|  | if (unlikely(ret)) | 
|  | skb_queue_head(&priv->tx_pending, skb); | 
|  | else | 
|  | priv->tx(priv->hw, skb); | 
|  | } | 
|  |  | 
|  | static void p54_wake_queues(struct p54_common *priv) | 
|  | { | 
|  | unsigned long flags; | 
|  | unsigned int i; | 
|  |  | 
|  | if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) | 
|  | return ; | 
|  |  | 
|  | p54_tx_pending(priv); | 
|  |  | 
|  | spin_lock_irqsave(&priv->tx_stats_lock, flags); | 
|  | for (i = 0; i < priv->hw->queues; i++) { | 
|  | if (priv->tx_stats[i + P54_QUEUE_DATA].len < | 
|  | priv->tx_stats[i + P54_QUEUE_DATA].limit) | 
|  | ieee80211_wake_queue(priv->hw, i); | 
|  | } | 
|  | spin_unlock_irqrestore(&priv->tx_stats_lock, flags); | 
|  | } | 
|  |  | 
|  | static int p54_tx_qos_accounting_alloc(struct p54_common *priv, | 
|  | struct sk_buff *skb, | 
|  | const u16 p54_queue) | 
|  | { | 
|  | struct p54_tx_queue_stats *queue; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (WARN_ON(p54_queue >= P54_QUEUE_NUM)) | 
|  | return -EINVAL; | 
|  |  | 
|  | queue = &priv->tx_stats[p54_queue]; | 
|  |  | 
|  | spin_lock_irqsave(&priv->tx_stats_lock, flags); | 
|  | if (unlikely(queue->len >= queue->limit && IS_QOS_QUEUE(p54_queue))) { | 
|  | spin_unlock_irqrestore(&priv->tx_stats_lock, flags); | 
|  | return -ENOSPC; | 
|  | } | 
|  |  | 
|  | queue->len++; | 
|  | queue->count++; | 
|  |  | 
|  | if (unlikely(queue->len == queue->limit && IS_QOS_QUEUE(p54_queue))) { | 
|  | u16 ac_queue = p54_queue - P54_QUEUE_DATA; | 
|  | ieee80211_stop_queue(priv->hw, ac_queue); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->tx_stats_lock, flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void p54_tx_qos_accounting_free(struct p54_common *priv, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | if (IS_DATA_FRAME(skb)) { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&priv->tx_stats_lock, flags); | 
|  | priv->tx_stats[GET_HW_QUEUE(skb)].len--; | 
|  | spin_unlock_irqrestore(&priv->tx_stats_lock, flags); | 
|  |  | 
|  | if (unlikely(GET_HW_QUEUE(skb) == P54_QUEUE_BEACON)) { | 
|  | if (priv->beacon_req_id == GET_REQ_ID(skb)) { | 
|  | /* this is the  active beacon set anymore */ | 
|  | priv->beacon_req_id = 0; | 
|  | } | 
|  | complete(&priv->beacon_comp); | 
|  | } | 
|  | } | 
|  | p54_wake_queues(priv); | 
|  | } | 
|  |  | 
|  | void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | if (unlikely(!skb)) | 
|  | return ; | 
|  |  | 
|  | skb_unlink(skb, &priv->tx_queue); | 
|  | p54_tx_qos_accounting_free(priv, skb); | 
|  | dev_kfree_skb_any(skb); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(p54_free_skb); | 
|  |  | 
|  | static struct sk_buff *p54_find_and_unlink_skb(struct p54_common *priv, | 
|  | const __le32 req_id) | 
|  | { | 
|  | struct sk_buff *entry; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&priv->tx_queue.lock, flags); | 
|  | skb_queue_walk(&priv->tx_queue, entry) { | 
|  | struct p54_hdr *hdr = (struct p54_hdr *) entry->data; | 
|  |  | 
|  | if (hdr->req_id == req_id) { | 
|  | __skb_unlink(entry, &priv->tx_queue); | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  | p54_tx_qos_accounting_free(priv, entry); | 
|  | return entry; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | void p54_tx(struct p54_common *priv, struct sk_buff *skb) | 
|  | { | 
|  | skb_queue_tail(&priv->tx_pending, skb); | 
|  | p54_tx_pending(priv); | 
|  | } | 
|  |  | 
|  | static int p54_rssi_to_dbm(struct p54_common *priv, int rssi) | 
|  | { | 
|  | if (priv->rxhw != 5) { | 
|  | return ((rssi * priv->cur_rssi->mul) / 64 + | 
|  | priv->cur_rssi->add) / 4; | 
|  | } else { | 
|  | /* | 
|  | * TODO: find the correct formula | 
|  | */ | 
|  | return rssi / 2 - 110; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Even if the firmware is capable of dealing with incoming traffic, | 
|  | * while dozing, we have to prepared in case mac80211 uses PS-POLL | 
|  | * to retrieve outstanding frames from our AP. | 
|  | * (see comment in net/mac80211/mlme.c @ line 1993) | 
|  | */ | 
|  | static void p54_pspoll_workaround(struct p54_common *priv, struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (void *) skb->data; | 
|  | struct ieee80211_tim_ie *tim_ie; | 
|  | u8 *tim; | 
|  | u8 tim_len; | 
|  | bool new_psm; | 
|  |  | 
|  | /* only beacons have a TIM IE */ | 
|  | if (!ieee80211_is_beacon(hdr->frame_control)) | 
|  | return; | 
|  |  | 
|  | if (!priv->aid) | 
|  | return; | 
|  |  | 
|  | /* only consider beacons from the associated BSSID */ | 
|  | if (compare_ether_addr(hdr->addr3, priv->bssid)) | 
|  | return; | 
|  |  | 
|  | tim = p54_find_ie(skb, WLAN_EID_TIM); | 
|  | if (!tim) | 
|  | return; | 
|  |  | 
|  | tim_len = tim[1]; | 
|  | tim_ie = (struct ieee80211_tim_ie *) &tim[2]; | 
|  |  | 
|  | new_psm = ieee80211_check_tim(tim_ie, tim_len, priv->aid); | 
|  | if (new_psm != priv->powersave_override) { | 
|  | priv->powersave_override = new_psm; | 
|  | p54_set_ps(priv); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int p54_rx_data(struct p54_common *priv, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_rx_data *hdr = (struct p54_rx_data *) skb->data; | 
|  | struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb); | 
|  | u16 freq = le16_to_cpu(hdr->freq); | 
|  | size_t header_len = sizeof(*hdr); | 
|  | u32 tsf32; | 
|  | u8 rate = hdr->rate & 0xf; | 
|  |  | 
|  | /* | 
|  | * If the device is in a unspecified state we have to | 
|  | * ignore all data frames. Else we could end up with a | 
|  | * nasty crash. | 
|  | */ | 
|  | if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) | 
|  | return 0; | 
|  |  | 
|  | if (!(hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_IN_FCS_GOOD))) | 
|  | return 0; | 
|  |  | 
|  | if (hdr->decrypt_status == P54_DECRYPT_OK) | 
|  | rx_status->flag |= RX_FLAG_DECRYPTED; | 
|  | if ((hdr->decrypt_status == P54_DECRYPT_FAIL_MICHAEL) || | 
|  | (hdr->decrypt_status == P54_DECRYPT_FAIL_TKIP)) | 
|  | rx_status->flag |= RX_FLAG_MMIC_ERROR; | 
|  |  | 
|  | rx_status->signal = p54_rssi_to_dbm(priv, hdr->rssi); | 
|  | if (hdr->rate & 0x10) | 
|  | rx_status->flag |= RX_FLAG_SHORTPRE; | 
|  | if (priv->hw->conf.channel->band == IEEE80211_BAND_5GHZ) | 
|  | rx_status->rate_idx = (rate < 4) ? 0 : rate - 4; | 
|  | else | 
|  | rx_status->rate_idx = rate; | 
|  |  | 
|  | rx_status->freq = freq; | 
|  | rx_status->band =  priv->hw->conf.channel->band; | 
|  | rx_status->antenna = hdr->antenna; | 
|  |  | 
|  | tsf32 = le32_to_cpu(hdr->tsf32); | 
|  | if (tsf32 < priv->tsf_low32) | 
|  | priv->tsf_high32++; | 
|  | rx_status->mactime = ((u64)priv->tsf_high32) << 32 | tsf32; | 
|  | priv->tsf_low32 = tsf32; | 
|  |  | 
|  | rx_status->flag |= RX_FLAG_MACTIME_MPDU; | 
|  |  | 
|  | if (hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN)) | 
|  | header_len += hdr->align[0]; | 
|  |  | 
|  | skb_pull(skb, header_len); | 
|  | skb_trim(skb, le16_to_cpu(hdr->len)); | 
|  | if (unlikely(priv->hw->conf.flags & IEEE80211_CONF_PS)) | 
|  | p54_pspoll_workaround(priv, skb); | 
|  |  | 
|  | ieee80211_rx_irqsafe(priv->hw, skb); | 
|  |  | 
|  | ieee80211_queue_delayed_work(priv->hw, &priv->work, | 
|  | msecs_to_jiffies(P54_STATISTICS_UPDATE)); | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void p54_rx_frame_sent(struct p54_common *priv, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | 
|  | struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct p54_hdr *entry_hdr; | 
|  | struct p54_tx_data *entry_data; | 
|  | struct sk_buff *entry; | 
|  | unsigned int pad = 0, frame_len; | 
|  | int count, idx; | 
|  |  | 
|  | entry = p54_find_and_unlink_skb(priv, hdr->req_id); | 
|  | if (unlikely(!entry)) | 
|  | return ; | 
|  |  | 
|  | frame_len = entry->len; | 
|  | info = IEEE80211_SKB_CB(entry); | 
|  | entry_hdr = (struct p54_hdr *) entry->data; | 
|  | entry_data = (struct p54_tx_data *) entry_hdr->data; | 
|  | priv->stats.dot11ACKFailureCount += payload->tries - 1; | 
|  |  | 
|  | /* | 
|  | * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are | 
|  | * generated by the driver. Therefore tx_status is bogus | 
|  | * and we don't want to confuse the mac80211 stack. | 
|  | */ | 
|  | if (unlikely(entry_data->hw_queue < P54_QUEUE_FWSCAN)) { | 
|  | dev_kfree_skb_any(entry); | 
|  | return ; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Clear manually, ieee80211_tx_info_clear_status would | 
|  | * clear the counts too and we need them. | 
|  | */ | 
|  | memset(&info->status.ampdu_ack_len, 0, | 
|  | sizeof(struct ieee80211_tx_info) - | 
|  | offsetof(struct ieee80211_tx_info, status.ampdu_ack_len)); | 
|  | BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, | 
|  | status.ampdu_ack_len) != 23); | 
|  |  | 
|  | if (entry_hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN)) | 
|  | pad = entry_data->align[0]; | 
|  |  | 
|  | /* walk through the rates array and adjust the counts */ | 
|  | count = payload->tries; | 
|  | for (idx = 0; idx < 4; idx++) { | 
|  | if (count >= info->status.rates[idx].count) { | 
|  | count -= info->status.rates[idx].count; | 
|  | } else if (count > 0) { | 
|  | info->status.rates[idx].count = count; | 
|  | count = 0; | 
|  | } else { | 
|  | info->status.rates[idx].idx = -1; | 
|  | info->status.rates[idx].count = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && | 
|  | !(payload->status & P54_TX_FAILED)) | 
|  | info->flags |= IEEE80211_TX_STAT_ACK; | 
|  | if (payload->status & P54_TX_PSM_CANCELLED) | 
|  | info->flags |= IEEE80211_TX_STAT_TX_FILTERED; | 
|  | info->status.ack_signal = p54_rssi_to_dbm(priv, | 
|  | (int)payload->ack_rssi); | 
|  |  | 
|  | /* Undo all changes to the frame. */ | 
|  | switch (entry_data->key_type) { | 
|  | case P54_CRYPTO_TKIPMICHAEL: { | 
|  | u8 *iv = (u8 *)(entry_data->align + pad + | 
|  | entry_data->crypt_offset); | 
|  |  | 
|  | /* Restore the original TKIP IV. */ | 
|  | iv[2] = iv[0]; | 
|  | iv[0] = iv[1]; | 
|  | iv[1] = (iv[0] | 0x20) & 0x7f;	/* WEPSeed - 8.3.2.2 */ | 
|  |  | 
|  | frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */ | 
|  | break; | 
|  | } | 
|  | case P54_CRYPTO_AESCCMP: | 
|  | frame_len -= 8; /* remove CCMP_MIC */ | 
|  | break; | 
|  | case P54_CRYPTO_WEP: | 
|  | frame_len -= 4; /* remove WEP_ICV */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | skb_trim(entry, frame_len); | 
|  | skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); | 
|  | ieee80211_tx_status_irqsafe(priv->hw, entry); | 
|  | } | 
|  |  | 
|  | static void p54_rx_eeprom_readback(struct p54_common *priv, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | 
|  | struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; | 
|  | struct sk_buff *tmp; | 
|  |  | 
|  | if (!priv->eeprom) | 
|  | return ; | 
|  |  | 
|  | if (priv->fw_var >= 0x509) { | 
|  | memcpy(priv->eeprom, eeprom->v2.data, | 
|  | le16_to_cpu(eeprom->v2.len)); | 
|  | } else { | 
|  | memcpy(priv->eeprom, eeprom->v1.data, | 
|  | le16_to_cpu(eeprom->v1.len)); | 
|  | } | 
|  |  | 
|  | priv->eeprom = NULL; | 
|  | tmp = p54_find_and_unlink_skb(priv, hdr->req_id); | 
|  | dev_kfree_skb_any(tmp); | 
|  | complete(&priv->eeprom_comp); | 
|  | } | 
|  |  | 
|  | static void p54_rx_stats(struct p54_common *priv, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | 
|  | struct p54_statistics *stats = (struct p54_statistics *) hdr->data; | 
|  | struct sk_buff *tmp; | 
|  | u32 tsf32; | 
|  |  | 
|  | if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) | 
|  | return ; | 
|  |  | 
|  | tsf32 = le32_to_cpu(stats->tsf32); | 
|  | if (tsf32 < priv->tsf_low32) | 
|  | priv->tsf_high32++; | 
|  | priv->tsf_low32 = tsf32; | 
|  |  | 
|  | priv->stats.dot11RTSFailureCount = le32_to_cpu(stats->rts_fail); | 
|  | priv->stats.dot11RTSSuccessCount = le32_to_cpu(stats->rts_success); | 
|  | priv->stats.dot11FCSErrorCount = le32_to_cpu(stats->rx_bad_fcs); | 
|  |  | 
|  | priv->noise = p54_rssi_to_dbm(priv, le32_to_cpu(stats->noise)); | 
|  |  | 
|  | tmp = p54_find_and_unlink_skb(priv, hdr->req_id); | 
|  | dev_kfree_skb_any(tmp); | 
|  | } | 
|  |  | 
|  | static void p54_rx_trap(struct p54_common *priv, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | 
|  | struct p54_trap *trap = (struct p54_trap *) hdr->data; | 
|  | u16 event = le16_to_cpu(trap->event); | 
|  | u16 freq = le16_to_cpu(trap->frequency); | 
|  |  | 
|  | switch (event) { | 
|  | case P54_TRAP_BEACON_TX: | 
|  | break; | 
|  | case P54_TRAP_RADAR: | 
|  | wiphy_info(priv->hw->wiphy, "radar (freq:%d MHz)\n", freq); | 
|  | break; | 
|  | case P54_TRAP_NO_BEACON: | 
|  | if (priv->vif) | 
|  | ieee80211_beacon_loss(priv->vif); | 
|  | break; | 
|  | case P54_TRAP_SCAN: | 
|  | break; | 
|  | case P54_TRAP_TBTT: | 
|  | break; | 
|  | case P54_TRAP_TIMER: | 
|  | break; | 
|  | case P54_TRAP_FAA_RADIO_OFF: | 
|  | wiphy_rfkill_set_hw_state(priv->hw->wiphy, true); | 
|  | break; | 
|  | case P54_TRAP_FAA_RADIO_ON: | 
|  | wiphy_rfkill_set_hw_state(priv->hw->wiphy, false); | 
|  | break; | 
|  | default: | 
|  | wiphy_info(priv->hw->wiphy, "received event:%x freq:%d\n", | 
|  | event, freq); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int p54_rx_control(struct p54_common *priv, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | 
|  |  | 
|  | switch (le16_to_cpu(hdr->type)) { | 
|  | case P54_CONTROL_TYPE_TXDONE: | 
|  | p54_rx_frame_sent(priv, skb); | 
|  | break; | 
|  | case P54_CONTROL_TYPE_TRAP: | 
|  | p54_rx_trap(priv, skb); | 
|  | break; | 
|  | case P54_CONTROL_TYPE_BBP: | 
|  | break; | 
|  | case P54_CONTROL_TYPE_STAT_READBACK: | 
|  | p54_rx_stats(priv, skb); | 
|  | break; | 
|  | case P54_CONTROL_TYPE_EEPROM_READBACK: | 
|  | p54_rx_eeprom_readback(priv, skb); | 
|  | break; | 
|  | default: | 
|  | wiphy_debug(priv->hw->wiphy, | 
|  | "not handling 0x%02x type control frame\n", | 
|  | le16_to_cpu(hdr->type)); | 
|  | break; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* returns zero if skb can be reused */ | 
|  | int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | u16 type = le16_to_cpu(*((__le16 *)skb->data)); | 
|  |  | 
|  | if (type & P54_HDR_FLAG_CONTROL) | 
|  | return p54_rx_control(priv, skb); | 
|  | else | 
|  | return p54_rx_data(priv, skb); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(p54_rx); | 
|  |  | 
|  | static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb, | 
|  | struct ieee80211_tx_info *info, u8 *queue, | 
|  | u32 *extra_len, u16 *flags, u16 *aid, | 
|  | bool *burst_possible) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
|  |  | 
|  | if (ieee80211_is_data_qos(hdr->frame_control)) | 
|  | *burst_possible = true; | 
|  | else | 
|  | *burst_possible = false; | 
|  |  | 
|  | if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)) | 
|  | *flags |= P54_HDR_FLAG_DATA_OUT_SEQNR; | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE) | 
|  | *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL; | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT) | 
|  | *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL; | 
|  |  | 
|  | *queue = skb_get_queue_mapping(skb) + P54_QUEUE_DATA; | 
|  |  | 
|  | switch (priv->mode) { | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | /* | 
|  | * We have to set P54_HDR_FLAG_DATA_OUT_PROMISC for | 
|  | * every frame in promiscuous/monitor mode. | 
|  | * see STSW45x0C LMAC API - page 12. | 
|  | */ | 
|  | *aid = 0; | 
|  | *flags |= P54_HDR_FLAG_DATA_OUT_PROMISC; | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | *aid = 1; | 
|  | break; | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { | 
|  | *aid = 0; | 
|  | *queue = P54_QUEUE_CAB; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (unlikely(ieee80211_is_mgmt(hdr->frame_control))) { | 
|  | if (ieee80211_is_probe_resp(hdr->frame_control)) { | 
|  | *aid = 0; | 
|  | *flags |= P54_HDR_FLAG_DATA_OUT_TIMESTAMP | | 
|  | P54_HDR_FLAG_DATA_OUT_NOCANCEL; | 
|  | return; | 
|  | } else if (ieee80211_is_beacon(hdr->frame_control)) { | 
|  | *aid = 0; | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_CTL_INJECTED) { | 
|  | /* | 
|  | * Injecting beacons on top of a AP is | 
|  | * not a good idea... nevertheless, | 
|  | * it should be doable. | 
|  | */ | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | *flags |= P54_HDR_FLAG_DATA_OUT_TIMESTAMP; | 
|  | *queue = P54_QUEUE_BEACON; | 
|  | *extra_len = IEEE80211_MAX_TIM_LEN; | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (info->control.sta) | 
|  | *aid = info->control.sta->aid; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static u8 p54_convert_algo(u32 cipher) | 
|  | { | 
|  | switch (cipher) { | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | return P54_CRYPTO_WEP; | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | return P54_CRYPTO_TKIPMICHAEL; | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | return P54_CRYPTO_AESCCMP; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | void p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct p54_tx_info *p54info; | 
|  | struct p54_hdr *hdr; | 
|  | struct p54_tx_data *txhdr; | 
|  | unsigned int padding, len, extra_len = 0; | 
|  | int i, j, ridx; | 
|  | u16 hdr_flags = 0, aid = 0; | 
|  | u8 rate, queue = 0, crypt_offset = 0; | 
|  | u8 cts_rate = 0x20; | 
|  | u8 rc_flags; | 
|  | u8 calculated_tries[4]; | 
|  | u8 nrates = 0, nremaining = 8; | 
|  | bool burst_allowed = false; | 
|  |  | 
|  | p54_tx_80211_header(priv, skb, info, &queue, &extra_len, | 
|  | &hdr_flags, &aid, &burst_allowed); | 
|  |  | 
|  | if (p54_tx_qos_accounting_alloc(priv, skb, queue)) { | 
|  | dev_kfree_skb_any(skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3; | 
|  | len = skb->len; | 
|  |  | 
|  | if (info->control.hw_key) { | 
|  | crypt_offset = ieee80211_get_hdrlen_from_skb(skb); | 
|  | if (info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) { | 
|  | u8 *iv = (u8 *)(skb->data + crypt_offset); | 
|  | /* | 
|  | * The firmware excepts that the IV has to have | 
|  | * this special format | 
|  | */ | 
|  | iv[1] = iv[0]; | 
|  | iv[0] = iv[2]; | 
|  | iv[2] = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | txhdr = (struct p54_tx_data *) skb_push(skb, sizeof(*txhdr) + padding); | 
|  | hdr = (struct p54_hdr *) skb_push(skb, sizeof(*hdr)); | 
|  |  | 
|  | if (padding) | 
|  | hdr_flags |= P54_HDR_FLAG_DATA_ALIGN; | 
|  | hdr->type = cpu_to_le16(aid); | 
|  | hdr->rts_tries = info->control.rates[0].count; | 
|  |  | 
|  | /* | 
|  | * we register the rates in perfect order, and | 
|  | * RTS/CTS won't happen on 5 GHz | 
|  | */ | 
|  | cts_rate = info->control.rts_cts_rate_idx; | 
|  |  | 
|  | memset(&txhdr->rateset, 0, sizeof(txhdr->rateset)); | 
|  |  | 
|  | /* see how many rates got used */ | 
|  | for (i = 0; i < dev->max_rates; i++) { | 
|  | if (info->control.rates[i].idx < 0) | 
|  | break; | 
|  | nrates++; | 
|  | } | 
|  |  | 
|  | /* limit tries to 8/nrates per rate */ | 
|  | for (i = 0; i < nrates; i++) { | 
|  | /* | 
|  | * The magic expression here is equivalent to 8/nrates for | 
|  | * all values that matter, but avoids division and jumps. | 
|  | * Note that nrates can only take the values 1 through 4. | 
|  | */ | 
|  | calculated_tries[i] = min_t(int, ((15 >> nrates) | 1) + 1, | 
|  | info->control.rates[i].count); | 
|  | nremaining -= calculated_tries[i]; | 
|  | } | 
|  |  | 
|  | /* if there are tries left, distribute from back to front */ | 
|  | for (i = nrates - 1; nremaining > 0 && i >= 0; i--) { | 
|  | int tmp = info->control.rates[i].count - calculated_tries[i]; | 
|  |  | 
|  | if (tmp <= 0) | 
|  | continue; | 
|  | /* RC requested more tries at this rate */ | 
|  |  | 
|  | tmp = min_t(int, tmp, nremaining); | 
|  | calculated_tries[i] += tmp; | 
|  | nremaining -= tmp; | 
|  | } | 
|  |  | 
|  | ridx = 0; | 
|  | for (i = 0; i < nrates && ridx < 8; i++) { | 
|  | /* we register the rates in perfect order */ | 
|  | rate = info->control.rates[i].idx; | 
|  | if (info->band == IEEE80211_BAND_5GHZ) | 
|  | rate += 4; | 
|  |  | 
|  | /* store the count we actually calculated for TX status */ | 
|  | info->control.rates[i].count = calculated_tries[i]; | 
|  |  | 
|  | rc_flags = info->control.rates[i].flags; | 
|  | if (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) { | 
|  | rate |= 0x10; | 
|  | cts_rate |= 0x10; | 
|  | } | 
|  | if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { | 
|  | burst_allowed = false; | 
|  | rate |= 0x40; | 
|  | } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { | 
|  | rate |= 0x20; | 
|  | burst_allowed = false; | 
|  | } | 
|  | for (j = 0; j < calculated_tries[i] && ridx < 8; j++) { | 
|  | txhdr->rateset[ridx] = rate; | 
|  | ridx++; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (burst_allowed) | 
|  | hdr_flags |= P54_HDR_FLAG_DATA_OUT_BURST; | 
|  |  | 
|  | /* TODO: enable bursting */ | 
|  | hdr->flags = cpu_to_le16(hdr_flags); | 
|  | hdr->tries = ridx; | 
|  | txhdr->rts_rate_idx = 0; | 
|  | if (info->control.hw_key) { | 
|  | txhdr->key_type = p54_convert_algo(info->control.hw_key->cipher); | 
|  | txhdr->key_len = min((u8)16, info->control.hw_key->keylen); | 
|  | memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len); | 
|  | if (info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) { | 
|  | /* reserve space for the MIC key */ | 
|  | len += 8; | 
|  | memcpy(skb_put(skb, 8), &(info->control.hw_key->key | 
|  | [NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY]), 8); | 
|  | } | 
|  | /* reserve some space for ICV */ | 
|  | len += info->control.hw_key->icv_len; | 
|  | memset(skb_put(skb, info->control.hw_key->icv_len), 0, | 
|  | info->control.hw_key->icv_len); | 
|  | } else { | 
|  | txhdr->key_type = 0; | 
|  | txhdr->key_len = 0; | 
|  | } | 
|  | txhdr->crypt_offset = crypt_offset; | 
|  | txhdr->hw_queue = queue; | 
|  | txhdr->backlog = priv->tx_stats[queue].len - 1; | 
|  | memset(txhdr->durations, 0, sizeof(txhdr->durations)); | 
|  | txhdr->tx_antenna = ((info->antenna_sel_tx == 0) ? | 
|  | 2 : info->antenna_sel_tx - 1) & priv->tx_diversity_mask; | 
|  | if (priv->rxhw == 5) { | 
|  | txhdr->longbow.cts_rate = cts_rate; | 
|  | txhdr->longbow.output_power = cpu_to_le16(priv->output_power); | 
|  | } else { | 
|  | txhdr->normal.output_power = priv->output_power; | 
|  | txhdr->normal.cts_rate = cts_rate; | 
|  | } | 
|  | if (padding) | 
|  | txhdr->align[0] = padding; | 
|  |  | 
|  | hdr->len = cpu_to_le16(len); | 
|  | /* modifies skb->cb and with it info, so must be last! */ | 
|  | p54info = (void *) info->rate_driver_data; | 
|  | p54info->extra_len = extra_len; | 
|  |  | 
|  | p54_tx(priv, skb); | 
|  | } |