|  | /* | 
|  | * This file is part of wl1251 | 
|  | * | 
|  | * Copyright (C) 2008 Nokia Corporation | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/irq.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/crc7.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/wl12xx.h> | 
|  |  | 
|  | #include "wl1251.h" | 
|  | #include "reg.h" | 
|  | #include "spi.h" | 
|  |  | 
|  | static irqreturn_t wl1251_irq(int irq, void *cookie) | 
|  | { | 
|  | struct wl1251 *wl; | 
|  |  | 
|  | wl1251_debug(DEBUG_IRQ, "IRQ"); | 
|  |  | 
|  | wl = cookie; | 
|  |  | 
|  | ieee80211_queue_work(wl->hw, &wl->irq_work); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static struct spi_device *wl_to_spi(struct wl1251 *wl) | 
|  | { | 
|  | return wl->if_priv; | 
|  | } | 
|  |  | 
|  | static void wl1251_spi_reset(struct wl1251 *wl) | 
|  | { | 
|  | u8 *cmd; | 
|  | struct spi_transfer t; | 
|  | struct spi_message m; | 
|  |  | 
|  | cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | wl1251_error("could not allocate cmd for spi reset"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | memset(&t, 0, sizeof(t)); | 
|  | spi_message_init(&m); | 
|  |  | 
|  | memset(cmd, 0xff, WSPI_INIT_CMD_LEN); | 
|  |  | 
|  | t.tx_buf = cmd; | 
|  | t.len = WSPI_INIT_CMD_LEN; | 
|  | spi_message_add_tail(&t, &m); | 
|  |  | 
|  | spi_sync(wl_to_spi(wl), &m); | 
|  |  | 
|  | wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN); | 
|  | } | 
|  |  | 
|  | static void wl1251_spi_wake(struct wl1251 *wl) | 
|  | { | 
|  | u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd; | 
|  | struct spi_transfer t; | 
|  | struct spi_message m; | 
|  |  | 
|  | cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | wl1251_error("could not allocate cmd for spi init"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | memset(crc, 0, sizeof(crc)); | 
|  | memset(&t, 0, sizeof(t)); | 
|  | spi_message_init(&m); | 
|  |  | 
|  | /* | 
|  | * Set WSPI_INIT_COMMAND | 
|  | * the data is being send from the MSB to LSB | 
|  | */ | 
|  | cmd[2] = 0xff; | 
|  | cmd[3] = 0xff; | 
|  | cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; | 
|  | cmd[0] = 0; | 
|  | cmd[7] = 0; | 
|  | cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3; | 
|  | cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; | 
|  |  | 
|  | if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0) | 
|  | cmd[5] |=  WSPI_INIT_CMD_DIS_FIXEDBUSY; | 
|  | else | 
|  | cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY; | 
|  |  | 
|  | cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS | 
|  | | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; | 
|  |  | 
|  | crc[0] = cmd[1]; | 
|  | crc[1] = cmd[0]; | 
|  | crc[2] = cmd[7]; | 
|  | crc[3] = cmd[6]; | 
|  | crc[4] = cmd[5]; | 
|  |  | 
|  | cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1; | 
|  | cmd[4] |= WSPI_INIT_CMD_END; | 
|  |  | 
|  | t.tx_buf = cmd; | 
|  | t.len = WSPI_INIT_CMD_LEN; | 
|  | spi_message_add_tail(&t, &m); | 
|  |  | 
|  | spi_sync(wl_to_spi(wl), &m); | 
|  |  | 
|  | wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN); | 
|  | } | 
|  |  | 
|  | static void wl1251_spi_reset_wake(struct wl1251 *wl) | 
|  | { | 
|  | wl1251_spi_reset(wl); | 
|  | wl1251_spi_wake(wl); | 
|  | } | 
|  |  | 
|  | static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf, | 
|  | size_t len) | 
|  | { | 
|  | struct spi_transfer t[3]; | 
|  | struct spi_message m; | 
|  | u8 *busy_buf; | 
|  | u32 *cmd; | 
|  |  | 
|  | cmd = &wl->buffer_cmd; | 
|  | busy_buf = wl->buffer_busyword; | 
|  |  | 
|  | *cmd = 0; | 
|  | *cmd |= WSPI_CMD_READ; | 
|  | *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; | 
|  | *cmd |= addr & WSPI_CMD_BYTE_ADDR; | 
|  |  | 
|  | spi_message_init(&m); | 
|  | memset(t, 0, sizeof(t)); | 
|  |  | 
|  | t[0].tx_buf = cmd; | 
|  | t[0].len = 4; | 
|  | spi_message_add_tail(&t[0], &m); | 
|  |  | 
|  | /* Busy and non busy words read */ | 
|  | t[1].rx_buf = busy_buf; | 
|  | t[1].len = WL1251_BUSY_WORD_LEN; | 
|  | spi_message_add_tail(&t[1], &m); | 
|  |  | 
|  | t[2].rx_buf = buf; | 
|  | t[2].len = len; | 
|  | spi_message_add_tail(&t[2], &m); | 
|  |  | 
|  | spi_sync(wl_to_spi(wl), &m); | 
|  |  | 
|  | /* FIXME: check busy words */ | 
|  |  | 
|  | wl1251_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd)); | 
|  | wl1251_dump(DEBUG_SPI, "spi_read buf <- ", buf, len); | 
|  | } | 
|  |  | 
|  | static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf, | 
|  | size_t len) | 
|  | { | 
|  | struct spi_transfer t[2]; | 
|  | struct spi_message m; | 
|  | u32 *cmd; | 
|  |  | 
|  | cmd = &wl->buffer_cmd; | 
|  |  | 
|  | *cmd = 0; | 
|  | *cmd |= WSPI_CMD_WRITE; | 
|  | *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; | 
|  | *cmd |= addr & WSPI_CMD_BYTE_ADDR; | 
|  |  | 
|  | spi_message_init(&m); | 
|  | memset(t, 0, sizeof(t)); | 
|  |  | 
|  | t[0].tx_buf = cmd; | 
|  | t[0].len = sizeof(*cmd); | 
|  | spi_message_add_tail(&t[0], &m); | 
|  |  | 
|  | t[1].tx_buf = buf; | 
|  | t[1].len = len; | 
|  | spi_message_add_tail(&t[1], &m); | 
|  |  | 
|  | spi_sync(wl_to_spi(wl), &m); | 
|  |  | 
|  | wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd)); | 
|  | wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len); | 
|  | } | 
|  |  | 
|  | static void wl1251_spi_enable_irq(struct wl1251 *wl) | 
|  | { | 
|  | return enable_irq(wl->irq); | 
|  | } | 
|  |  | 
|  | static void wl1251_spi_disable_irq(struct wl1251 *wl) | 
|  | { | 
|  | return disable_irq(wl->irq); | 
|  | } | 
|  |  | 
|  | static int wl1251_spi_set_power(struct wl1251 *wl, bool enable) | 
|  | { | 
|  | if (wl->set_power) | 
|  | wl->set_power(enable); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct wl1251_if_operations wl1251_spi_ops = { | 
|  | .read = wl1251_spi_read, | 
|  | .write = wl1251_spi_write, | 
|  | .reset = wl1251_spi_reset_wake, | 
|  | .enable_irq = wl1251_spi_enable_irq, | 
|  | .disable_irq = wl1251_spi_disable_irq, | 
|  | .power = wl1251_spi_set_power, | 
|  | }; | 
|  |  | 
|  | static int __devinit wl1251_spi_probe(struct spi_device *spi) | 
|  | { | 
|  | struct wl12xx_platform_data *pdata; | 
|  | struct ieee80211_hw *hw; | 
|  | struct wl1251 *wl; | 
|  | int ret; | 
|  |  | 
|  | pdata = spi->dev.platform_data; | 
|  | if (!pdata) { | 
|  | wl1251_error("no platform data"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | hw = wl1251_alloc_hw(); | 
|  | if (IS_ERR(hw)) | 
|  | return PTR_ERR(hw); | 
|  |  | 
|  | wl = hw->priv; | 
|  |  | 
|  | SET_IEEE80211_DEV(hw, &spi->dev); | 
|  | dev_set_drvdata(&spi->dev, wl); | 
|  | wl->if_priv = spi; | 
|  | wl->if_ops = &wl1251_spi_ops; | 
|  |  | 
|  | /* This is the only SPI value that we need to set here, the rest | 
|  | * comes from the board-peripherals file */ | 
|  | spi->bits_per_word = 32; | 
|  |  | 
|  | ret = spi_setup(spi); | 
|  | if (ret < 0) { | 
|  | wl1251_error("spi_setup failed"); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | wl->set_power = pdata->set_power; | 
|  | if (!wl->set_power) { | 
|  | wl1251_error("set power function missing in platform data"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | wl->irq = spi->irq; | 
|  | if (wl->irq < 0) { | 
|  | wl1251_error("irq missing in platform data"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | wl->use_eeprom = pdata->use_eeprom; | 
|  |  | 
|  | ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl); | 
|  | if (ret < 0) { | 
|  | wl1251_error("request_irq() failed: %d", ret); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); | 
|  |  | 
|  | disable_irq(wl->irq); | 
|  |  | 
|  | ret = wl1251_init_ieee80211(wl); | 
|  | if (ret) | 
|  | goto out_irq; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_irq: | 
|  | free_irq(wl->irq, wl); | 
|  |  | 
|  | out_free: | 
|  | ieee80211_free_hw(hw); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit wl1251_spi_remove(struct spi_device *spi) | 
|  | { | 
|  | struct wl1251 *wl = dev_get_drvdata(&spi->dev); | 
|  |  | 
|  | free_irq(wl->irq, wl); | 
|  | wl1251_free_hw(wl); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct spi_driver wl1251_spi_driver = { | 
|  | .driver = { | 
|  | .name		= DRIVER_NAME, | 
|  | .bus		= &spi_bus_type, | 
|  | .owner		= THIS_MODULE, | 
|  | }, | 
|  |  | 
|  | .probe		= wl1251_spi_probe, | 
|  | .remove		= __devexit_p(wl1251_spi_remove), | 
|  | }; | 
|  |  | 
|  | static int __init wl1251_spi_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = spi_register_driver(&wl1251_spi_driver); | 
|  | if (ret < 0) { | 
|  | wl1251_error("failed to register spi driver: %d", ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit wl1251_spi_exit(void) | 
|  | { | 
|  | spi_unregister_driver(&wl1251_spi_driver); | 
|  |  | 
|  | wl1251_notice("unloaded"); | 
|  | } | 
|  |  | 
|  | module_init(wl1251_spi_init); | 
|  | module_exit(wl1251_spi_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>"); | 
|  | MODULE_ALIAS("spi:wl1251"); |