|  | /* | 
|  | * This file is part of wl1271 | 
|  | * | 
|  | * Copyright (C) 2009-2010 Nokia Corporation | 
|  | * | 
|  | * Contact: Luciano Coelho <luciano.coelho@nokia.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/crc7.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/ieee80211.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include "wl12xx.h" | 
|  | #include "reg.h" | 
|  | #include "io.h" | 
|  | #include "acx.h" | 
|  | #include "wl12xx_80211.h" | 
|  | #include "cmd.h" | 
|  | #include "event.h" | 
|  | #include "tx.h" | 
|  |  | 
|  | #define WL1271_CMD_FAST_POLL_COUNT       50 | 
|  |  | 
|  | /* | 
|  | * send command to firmware | 
|  | * | 
|  | * @wl: wl struct | 
|  | * @id: command id | 
|  | * @buf: buffer containing the command, must work with dma | 
|  | * @len: length of the buffer | 
|  | */ | 
|  | int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, | 
|  | size_t res_len) | 
|  | { | 
|  | struct wl1271_cmd_header *cmd; | 
|  | unsigned long timeout; | 
|  | u32 intr; | 
|  | int ret = 0; | 
|  | u16 status; | 
|  | u16 poll_count = 0; | 
|  |  | 
|  | cmd = buf; | 
|  | cmd->id = cpu_to_le16(id); | 
|  | cmd->status = 0; | 
|  |  | 
|  | WARN_ON(len % 4 != 0); | 
|  | WARN_ON(test_bit(WL1271_FLAG_IN_ELP, &wl->flags)); | 
|  |  | 
|  | wl1271_write(wl, wl->cmd_box_addr, buf, len, false); | 
|  |  | 
|  | wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD); | 
|  |  | 
|  | timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT); | 
|  |  | 
|  | intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); | 
|  | while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) { | 
|  | if (time_after(jiffies, timeout)) { | 
|  | wl1271_error("command complete timeout"); | 
|  | ret = -ETIMEDOUT; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | poll_count++; | 
|  | if (poll_count < WL1271_CMD_FAST_POLL_COUNT) | 
|  | udelay(10); | 
|  | else | 
|  | msleep(1); | 
|  |  | 
|  | intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); | 
|  | } | 
|  |  | 
|  | /* read back the status code of the command */ | 
|  | if (res_len == 0) | 
|  | res_len = sizeof(struct wl1271_cmd_header); | 
|  | wl1271_read(wl, wl->cmd_box_addr, cmd, res_len, false); | 
|  |  | 
|  | status = le16_to_cpu(cmd->status); | 
|  | if (status != CMD_STATUS_SUCCESS) { | 
|  | wl1271_error("command execute failure %d", status); | 
|  | ret = -EIO; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | wl1271_write32(wl, ACX_REG_INTERRUPT_ACK, | 
|  | WL1271_ACX_INTR_CMD_COMPLETE); | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | WARN_ON(1); | 
|  | ieee80211_queue_work(wl->hw, &wl->recovery_work); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_general_parms(struct wl1271 *wl) | 
|  | { | 
|  | struct wl1271_general_parms_cmd *gen_parms; | 
|  | struct wl1271_ini_general_params *gp = | 
|  | &((struct wl1271_nvs_file *)wl->nvs)->general_params; | 
|  | bool answer = false; | 
|  | int ret; | 
|  |  | 
|  | if (!wl->nvs) | 
|  | return -ENODEV; | 
|  |  | 
|  | gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL); | 
|  | if (!gen_parms) | 
|  | return -ENOMEM; | 
|  |  | 
|  | gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM; | 
|  |  | 
|  | memcpy(&gen_parms->general_params, gp, sizeof(*gp)); | 
|  |  | 
|  | if (gp->tx_bip_fem_auto_detect) | 
|  | answer = true; | 
|  |  | 
|  | /* Override the REF CLK from the NVS with the one from platform data */ | 
|  | gen_parms->general_params.ref_clock = wl->ref_clock; | 
|  |  | 
|  | ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer); | 
|  | if (ret < 0) { | 
|  | wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | gp->tx_bip_fem_manufacturer = | 
|  | gen_parms->general_params.tx_bip_fem_manufacturer; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n", | 
|  | answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer); | 
|  |  | 
|  | out: | 
|  | kfree(gen_parms); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl128x_cmd_general_parms(struct wl1271 *wl) | 
|  | { | 
|  | struct wl128x_general_parms_cmd *gen_parms; | 
|  | struct wl128x_ini_general_params *gp = | 
|  | &((struct wl128x_nvs_file *)wl->nvs)->general_params; | 
|  | bool answer = false; | 
|  | int ret; | 
|  |  | 
|  | if (!wl->nvs) | 
|  | return -ENODEV; | 
|  |  | 
|  | gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL); | 
|  | if (!gen_parms) | 
|  | return -ENOMEM; | 
|  |  | 
|  | gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM; | 
|  |  | 
|  | memcpy(&gen_parms->general_params, gp, sizeof(*gp)); | 
|  |  | 
|  | if (gp->tx_bip_fem_auto_detect) | 
|  | answer = true; | 
|  |  | 
|  | /* Replace REF and TCXO CLKs with the ones from platform data */ | 
|  | gen_parms->general_params.ref_clock = wl->ref_clock; | 
|  | gen_parms->general_params.tcxo_ref_clock = wl->tcxo_clock; | 
|  |  | 
|  | ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer); | 
|  | if (ret < 0) { | 
|  | wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | gp->tx_bip_fem_manufacturer = | 
|  | gen_parms->general_params.tx_bip_fem_manufacturer; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n", | 
|  | answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer); | 
|  |  | 
|  | out: | 
|  | kfree(gen_parms); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_radio_parms(struct wl1271 *wl) | 
|  | { | 
|  | struct wl1271_nvs_file *nvs = (struct wl1271_nvs_file *)wl->nvs; | 
|  | struct wl1271_radio_parms_cmd *radio_parms; | 
|  | struct wl1271_ini_general_params *gp = &nvs->general_params; | 
|  | int ret; | 
|  |  | 
|  | if (!wl->nvs) | 
|  | return -ENODEV; | 
|  |  | 
|  | radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL); | 
|  | if (!radio_parms) | 
|  | return -ENOMEM; | 
|  |  | 
|  | radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM; | 
|  |  | 
|  | /* 2.4GHz parameters */ | 
|  | memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2, | 
|  | sizeof(struct wl1271_ini_band_params_2)); | 
|  | memcpy(&radio_parms->dyn_params_2, | 
|  | &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params, | 
|  | sizeof(struct wl1271_ini_fem_params_2)); | 
|  |  | 
|  | /* 5GHz parameters */ | 
|  | memcpy(&radio_parms->static_params_5, | 
|  | &nvs->stat_radio_params_5, | 
|  | sizeof(struct wl1271_ini_band_params_5)); | 
|  | memcpy(&radio_parms->dyn_params_5, | 
|  | &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params, | 
|  | sizeof(struct wl1271_ini_fem_params_5)); | 
|  |  | 
|  | wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ", | 
|  | radio_parms, sizeof(*radio_parms)); | 
|  |  | 
|  | ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0); | 
|  | if (ret < 0) | 
|  | wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed"); | 
|  |  | 
|  | kfree(radio_parms); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl128x_cmd_radio_parms(struct wl1271 *wl) | 
|  | { | 
|  | struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs; | 
|  | struct wl128x_radio_parms_cmd *radio_parms; | 
|  | struct wl128x_ini_general_params *gp = &nvs->general_params; | 
|  | int ret; | 
|  |  | 
|  | if (!wl->nvs) | 
|  | return -ENODEV; | 
|  |  | 
|  | radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL); | 
|  | if (!radio_parms) | 
|  | return -ENOMEM; | 
|  |  | 
|  | radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM; | 
|  |  | 
|  | /* 2.4GHz parameters */ | 
|  | memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2, | 
|  | sizeof(struct wl128x_ini_band_params_2)); | 
|  | memcpy(&radio_parms->dyn_params_2, | 
|  | &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params, | 
|  | sizeof(struct wl128x_ini_fem_params_2)); | 
|  |  | 
|  | /* 5GHz parameters */ | 
|  | memcpy(&radio_parms->static_params_5, | 
|  | &nvs->stat_radio_params_5, | 
|  | sizeof(struct wl128x_ini_band_params_5)); | 
|  | memcpy(&radio_parms->dyn_params_5, | 
|  | &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params, | 
|  | sizeof(struct wl128x_ini_fem_params_5)); | 
|  |  | 
|  | radio_parms->fem_vendor_and_options = nvs->fem_vendor_and_options; | 
|  |  | 
|  | wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ", | 
|  | radio_parms, sizeof(*radio_parms)); | 
|  |  | 
|  | ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0); | 
|  | if (ret < 0) | 
|  | wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed"); | 
|  |  | 
|  | kfree(radio_parms); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_ext_radio_parms(struct wl1271 *wl) | 
|  | { | 
|  | struct wl1271_ext_radio_parms_cmd *ext_radio_parms; | 
|  | struct conf_rf_settings *rf = &wl->conf.rf; | 
|  | int ret; | 
|  |  | 
|  | if (!wl->nvs) | 
|  | return -ENODEV; | 
|  |  | 
|  | ext_radio_parms = kzalloc(sizeof(*ext_radio_parms), GFP_KERNEL); | 
|  | if (!ext_radio_parms) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ext_radio_parms->test.id = TEST_CMD_INI_FILE_RF_EXTENDED_PARAM; | 
|  |  | 
|  | memcpy(ext_radio_parms->tx_per_channel_power_compensation_2, | 
|  | rf->tx_per_channel_power_compensation_2, | 
|  | CONF_TX_PWR_COMPENSATION_LEN_2); | 
|  | memcpy(ext_radio_parms->tx_per_channel_power_compensation_5, | 
|  | rf->tx_per_channel_power_compensation_5, | 
|  | CONF_TX_PWR_COMPENSATION_LEN_5); | 
|  |  | 
|  | wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_EXT_RADIO_PARAM: ", | 
|  | ext_radio_parms, sizeof(*ext_radio_parms)); | 
|  |  | 
|  | ret = wl1271_cmd_test(wl, ext_radio_parms, sizeof(*ext_radio_parms), 0); | 
|  | if (ret < 0) | 
|  | wl1271_warning("TEST_CMD_INI_FILE_RF_EXTENDED_PARAM failed"); | 
|  |  | 
|  | kfree(ext_radio_parms); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Poll the mailbox event field until any of the bits in the mask is set or a | 
|  | * timeout occurs (WL1271_EVENT_TIMEOUT in msecs) | 
|  | */ | 
|  | static int wl1271_cmd_wait_for_event_or_timeout(struct wl1271 *wl, u32 mask) | 
|  | { | 
|  | u32 events_vector, event; | 
|  | unsigned long timeout; | 
|  |  | 
|  | timeout = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT); | 
|  |  | 
|  | do { | 
|  | if (time_after(jiffies, timeout)) { | 
|  | wl1271_debug(DEBUG_CMD, "timeout waiting for event %d", | 
|  | (int)mask); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | msleep(1); | 
|  |  | 
|  | /* read from both event fields */ | 
|  | wl1271_read(wl, wl->mbox_ptr[0], &events_vector, | 
|  | sizeof(events_vector), false); | 
|  | event = events_vector & mask; | 
|  | wl1271_read(wl, wl->mbox_ptr[1], &events_vector, | 
|  | sizeof(events_vector), false); | 
|  | event |= events_vector & mask; | 
|  | } while (!event); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl1271_cmd_wait_for_event(struct wl1271 *wl, u32 mask) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = wl1271_cmd_wait_for_event_or_timeout(wl, mask); | 
|  | if (ret != 0) { | 
|  | ieee80211_queue_work(wl->hw, &wl->recovery_work); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type) | 
|  | { | 
|  | struct wl1271_cmd_join *join; | 
|  | int ret, i; | 
|  | u8 *bssid; | 
|  |  | 
|  | join = kzalloc(sizeof(*join), GFP_KERNEL); | 
|  | if (!join) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd join"); | 
|  |  | 
|  | /* Reverse order BSSID */ | 
|  | bssid = (u8 *) &join->bssid_lsb; | 
|  | for (i = 0; i < ETH_ALEN; i++) | 
|  | bssid[i] = wl->bssid[ETH_ALEN - i - 1]; | 
|  |  | 
|  | join->rx_config_options = cpu_to_le32(wl->rx_config); | 
|  | join->rx_filter_options = cpu_to_le32(wl->rx_filter); | 
|  | join->bss_type = bss_type; | 
|  | join->basic_rate_set = cpu_to_le32(wl->basic_rate_set); | 
|  | join->supported_rate_set = cpu_to_le32(wl->rate_set); | 
|  |  | 
|  | if (wl->band == IEEE80211_BAND_5GHZ) | 
|  | join->bss_type |= WL1271_JOIN_CMD_BSS_TYPE_5GHZ; | 
|  |  | 
|  | join->beacon_interval = cpu_to_le16(wl->beacon_int); | 
|  | join->dtim_interval = WL1271_DEFAULT_DTIM_PERIOD; | 
|  |  | 
|  | join->channel = wl->channel; | 
|  | join->ssid_len = wl->ssid_len; | 
|  | memcpy(join->ssid, wl->ssid, wl->ssid_len); | 
|  |  | 
|  | join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET; | 
|  |  | 
|  | /* reset TX security counters */ | 
|  | wl->tx_security_last_seq = 0; | 
|  | wl->tx_security_seq = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd join: basic_rate_set=0x%x, rate_set=0x%x", | 
|  | join->basic_rate_set, join->supported_rate_set); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("failed to initiate cmd join"); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | ret = wl1271_cmd_wait_for_event(wl, JOIN_EVENT_COMPLETE_ID); | 
|  | if (ret < 0) | 
|  | wl1271_error("cmd join event completion error"); | 
|  |  | 
|  | out_free: | 
|  | kfree(join); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * send test command to firmware | 
|  | * | 
|  | * @wl: wl struct | 
|  | * @buf: buffer containing the command, with all headers, must work with dma | 
|  | * @len: length of the buffer | 
|  | * @answer: is answer needed | 
|  | */ | 
|  | int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer) | 
|  | { | 
|  | int ret; | 
|  | size_t res_len = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd test"); | 
|  |  | 
|  | if (answer) | 
|  | res_len = buf_len; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len, res_len); | 
|  |  | 
|  | if (ret < 0) { | 
|  | wl1271_warning("TEST command failed"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * read acx from firmware | 
|  | * | 
|  | * @wl: wl struct | 
|  | * @id: acx id | 
|  | * @buf: buffer for the response, including all headers, must work with dma | 
|  | * @len: length of buf | 
|  | */ | 
|  | int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len) | 
|  | { | 
|  | struct acx_header *acx = buf; | 
|  | int ret; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd interrogate"); | 
|  |  | 
|  | acx->id = cpu_to_le16(id); | 
|  |  | 
|  | /* payload length, does not include any headers */ | 
|  | acx->len = cpu_to_le16(len - sizeof(*acx)); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx), len); | 
|  | if (ret < 0) | 
|  | wl1271_error("INTERROGATE command failed"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * write acx value to firmware | 
|  | * | 
|  | * @wl: wl struct | 
|  | * @id: acx id | 
|  | * @buf: buffer containing acx, including all headers, must work with dma | 
|  | * @len: length of buf | 
|  | */ | 
|  | int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len) | 
|  | { | 
|  | struct acx_header *acx = buf; | 
|  | int ret; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd configure"); | 
|  |  | 
|  | acx->id = cpu_to_le16(id); | 
|  |  | 
|  | /* payload length, does not include any headers */ | 
|  | acx->len = cpu_to_le16(len - sizeof(*acx)); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len, 0); | 
|  | if (ret < 0) { | 
|  | wl1271_warning("CONFIGURE command NOK"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_data_path(struct wl1271 *wl, bool enable) | 
|  | { | 
|  | struct cmd_enabledisable_path *cmd; | 
|  | int ret; | 
|  | u16 cmd_rx, cmd_tx; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd data path"); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* the channel here is only used for calibration, so hardcoded to 1 */ | 
|  | cmd->channel = 1; | 
|  |  | 
|  | if (enable) { | 
|  | cmd_rx = CMD_ENABLE_RX; | 
|  | cmd_tx = CMD_ENABLE_TX; | 
|  | } else { | 
|  | cmd_rx = CMD_DISABLE_RX; | 
|  | cmd_tx = CMD_DISABLE_TX; | 
|  | } | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("rx %s cmd for channel %d failed", | 
|  | enable ? "start" : "stop", cmd->channel); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d", | 
|  | enable ? "start" : "stop", cmd->channel); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("tx %s cmd for channel %d failed", | 
|  | enable ? "start" : "stop", cmd->channel); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d", | 
|  | enable ? "start" : "stop", cmd->channel); | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode) | 
|  | { | 
|  | struct wl1271_cmd_ps_params *ps_params = NULL; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd set ps mode"); | 
|  |  | 
|  | ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL); | 
|  | if (!ps_params) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ps_params->ps_mode = ps_mode; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params, | 
|  | sizeof(*ps_params), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("cmd set_ps_mode failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(ps_params); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id, | 
|  | void *buf, size_t buf_len, int index, u32 rates) | 
|  | { | 
|  | struct wl1271_cmd_template_set *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd template_set %d", template_id); | 
|  |  | 
|  | WARN_ON(buf_len > WL1271_CMD_TEMPL_MAX_SIZE); | 
|  | buf_len = min_t(size_t, buf_len, WL1271_CMD_TEMPL_MAX_SIZE); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->len = cpu_to_le16(buf_len); | 
|  | cmd->template_type = template_id; | 
|  | cmd->enabled_rates = cpu_to_le32(rates); | 
|  | cmd->short_retry_limit = wl->conf.tx.tmpl_short_retry_limit; | 
|  | cmd->long_retry_limit = wl->conf.tx.tmpl_long_retry_limit; | 
|  | cmd->index = index; | 
|  |  | 
|  | if (buf) | 
|  | memcpy(cmd->template_data, buf, buf_len); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_warning("cmd set_template failed: %d", ret); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | out_free: | 
|  | kfree(cmd); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_build_null_data(struct wl1271 *wl) | 
|  | { | 
|  | struct sk_buff *skb = NULL; | 
|  | int size; | 
|  | void *ptr; | 
|  | int ret = -ENOMEM; | 
|  |  | 
|  |  | 
|  | if (wl->bss_type == BSS_TYPE_IBSS) { | 
|  | size = sizeof(struct wl12xx_null_data_template); | 
|  | ptr = NULL; | 
|  | } else { | 
|  | skb = ieee80211_nullfunc_get(wl->hw, wl->vif); | 
|  | if (!skb) | 
|  | goto out; | 
|  | size = skb->len; | 
|  | ptr = skb->data; | 
|  | } | 
|  |  | 
|  | ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, ptr, size, 0, | 
|  | wl->basic_rate); | 
|  |  | 
|  | out: | 
|  | dev_kfree_skb(skb); | 
|  | if (ret) | 
|  | wl1271_warning("cmd buld null data failed %d", ret); | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_build_klv_null_data(struct wl1271 *wl) | 
|  | { | 
|  | struct sk_buff *skb = NULL; | 
|  | int ret = -ENOMEM; | 
|  |  | 
|  | skb = ieee80211_nullfunc_get(wl->hw, wl->vif); | 
|  | if (!skb) | 
|  | goto out; | 
|  |  | 
|  | ret = wl1271_cmd_template_set(wl, CMD_TEMPL_KLV, | 
|  | skb->data, skb->len, | 
|  | CMD_TEMPL_KLV_IDX_NULL_DATA, | 
|  | wl->basic_rate); | 
|  |  | 
|  | out: | 
|  | dev_kfree_skb(skb); | 
|  | if (ret) | 
|  | wl1271_warning("cmd build klv null data failed %d", ret); | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | int ret = 0; | 
|  |  | 
|  | skb = ieee80211_pspoll_get(wl->hw, wl->vif); | 
|  | if (!skb) | 
|  | goto out; | 
|  |  | 
|  | ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, skb->data, | 
|  | skb->len, 0, wl->basic_rate_set); | 
|  |  | 
|  | out: | 
|  | dev_kfree_skb(skb); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_build_probe_req(struct wl1271 *wl, | 
|  | const u8 *ssid, size_t ssid_len, | 
|  | const u8 *ie, size_t ie_len, u8 band) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | int ret; | 
|  |  | 
|  | skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len, | 
|  | ie, ie_len); | 
|  | if (!skb) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", skb->data, skb->len); | 
|  |  | 
|  | if (band == IEEE80211_BAND_2GHZ) | 
|  | ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, | 
|  | skb->data, skb->len, 0, | 
|  | wl->conf.tx.basic_rate); | 
|  | else | 
|  | ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5, | 
|  | skb->data, skb->len, 0, | 
|  | wl->conf.tx.basic_rate_5); | 
|  |  | 
|  | out: | 
|  | dev_kfree_skb(skb); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | struct sk_buff *wl1271_cmd_build_ap_probe_req(struct wl1271 *wl, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!skb) | 
|  | skb = ieee80211_ap_probereq_get(wl->hw, wl->vif); | 
|  | if (!skb) | 
|  | goto out; | 
|  |  | 
|  | wl1271_dump(DEBUG_SCAN, "AP PROBE REQ: ", skb->data, skb->len); | 
|  |  | 
|  | if (wl->band == IEEE80211_BAND_2GHZ) | 
|  | ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, | 
|  | skb->data, skb->len, 0, | 
|  | wl->conf.tx.basic_rate); | 
|  | else | 
|  | ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5, | 
|  | skb->data, skb->len, 0, | 
|  | wl->conf.tx.basic_rate_5); | 
|  |  | 
|  | if (ret < 0) | 
|  | wl1271_error("Unable to set ap probe request template."); | 
|  |  | 
|  | out: | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_build_arp_rsp(struct wl1271 *wl, __be32 ip_addr) | 
|  | { | 
|  | int ret; | 
|  | struct wl12xx_arp_rsp_template tmpl; | 
|  | struct ieee80211_hdr_3addr *hdr; | 
|  | struct arphdr *arp_hdr; | 
|  |  | 
|  | memset(&tmpl, 0, sizeof(tmpl)); | 
|  |  | 
|  | /* mac80211 header */ | 
|  | hdr = &tmpl.hdr; | 
|  | hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
|  | IEEE80211_STYPE_DATA | | 
|  | IEEE80211_FCTL_TODS); | 
|  | memcpy(hdr->addr1, wl->vif->bss_conf.bssid, ETH_ALEN); | 
|  | memcpy(hdr->addr2, wl->vif->addr, ETH_ALEN); | 
|  | memset(hdr->addr3, 0xff, ETH_ALEN); | 
|  |  | 
|  | /* llc layer */ | 
|  | memcpy(tmpl.llc_hdr, rfc1042_header, sizeof(rfc1042_header)); | 
|  | tmpl.llc_type = cpu_to_be16(ETH_P_ARP); | 
|  |  | 
|  | /* arp header */ | 
|  | arp_hdr = &tmpl.arp_hdr; | 
|  | arp_hdr->ar_hrd = cpu_to_be16(ARPHRD_ETHER); | 
|  | arp_hdr->ar_pro = cpu_to_be16(ETH_P_IP); | 
|  | arp_hdr->ar_hln = ETH_ALEN; | 
|  | arp_hdr->ar_pln = 4; | 
|  | arp_hdr->ar_op = cpu_to_be16(ARPOP_REPLY); | 
|  |  | 
|  | /* arp payload */ | 
|  | memcpy(tmpl.sender_hw, wl->vif->addr, ETH_ALEN); | 
|  | tmpl.sender_ip = ip_addr; | 
|  |  | 
|  | ret = wl1271_cmd_template_set(wl, CMD_TEMPL_ARP_RSP, | 
|  | &tmpl, sizeof(tmpl), 0, | 
|  | wl->basic_rate); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_build_qos_null_data(struct wl1271 *wl) | 
|  | { | 
|  | struct ieee80211_qos_hdr template; | 
|  |  | 
|  | memset(&template, 0, sizeof(template)); | 
|  |  | 
|  | memcpy(template.addr1, wl->bssid, ETH_ALEN); | 
|  | memcpy(template.addr2, wl->mac_addr, ETH_ALEN); | 
|  | memcpy(template.addr3, wl->bssid, ETH_ALEN); | 
|  |  | 
|  | template.frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
|  | IEEE80211_STYPE_QOS_NULLFUNC | | 
|  | IEEE80211_FCTL_TODS); | 
|  |  | 
|  | /* FIXME: not sure what priority to use here */ | 
|  | template.qos_ctrl = cpu_to_le16(0); | 
|  |  | 
|  | return wl1271_cmd_template_set(wl, CMD_TEMPL_QOS_NULL_DATA, &template, | 
|  | sizeof(template), 0, | 
|  | wl->basic_rate); | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_set_sta_default_wep_key(struct wl1271 *wl, u8 id) | 
|  | { | 
|  | struct wl1271_cmd_set_sta_keys *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd set_default_wep_key %d", id); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->id = id; | 
|  | cmd->key_action = cpu_to_le16(KEY_SET_ID); | 
|  | cmd->key_type = KEY_WEP; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_warning("cmd set_default_wep_key failed: %d", ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_set_ap_default_wep_key(struct wl1271 *wl, u8 id) | 
|  | { | 
|  | struct wl1271_cmd_set_ap_keys *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd set_ap_default_wep_key %d", id); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->hlid = WL1271_AP_BROADCAST_HLID; | 
|  | cmd->key_id = id; | 
|  | cmd->lid_key_type = WEP_DEFAULT_LID_TYPE; | 
|  | cmd->key_action = cpu_to_le16(KEY_SET_ID); | 
|  | cmd->key_type = KEY_WEP; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_warning("cmd set_ap_default_wep_key failed: %d", ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_set_sta_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type, | 
|  | u8 key_size, const u8 *key, const u8 *addr, | 
|  | u32 tx_seq_32, u16 tx_seq_16) | 
|  | { | 
|  | struct wl1271_cmd_set_sta_keys *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (key_type != KEY_WEP) | 
|  | memcpy(cmd->addr, addr, ETH_ALEN); | 
|  |  | 
|  | cmd->key_action = cpu_to_le16(action); | 
|  | cmd->key_size = key_size; | 
|  | cmd->key_type = key_type; | 
|  |  | 
|  | cmd->ac_seq_num16[0] = cpu_to_le16(tx_seq_16); | 
|  | cmd->ac_seq_num32[0] = cpu_to_le32(tx_seq_32); | 
|  |  | 
|  | /* we have only one SSID profile */ | 
|  | cmd->ssid_profile = 0; | 
|  |  | 
|  | cmd->id = id; | 
|  |  | 
|  | if (key_type == KEY_TKIP) { | 
|  | /* | 
|  | * We get the key in the following form: | 
|  | * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes) | 
|  | * but the target is expecting: | 
|  | * TKIP - RX MIC - TX MIC | 
|  | */ | 
|  | memcpy(cmd->key, key, 16); | 
|  | memcpy(cmd->key + 16, key + 24, 8); | 
|  | memcpy(cmd->key + 24, key + 16, 8); | 
|  |  | 
|  | } else { | 
|  | memcpy(cmd->key, key, key_size); | 
|  | } | 
|  |  | 
|  | wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd)); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_warning("could not set keys"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_set_ap_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type, | 
|  | u8 key_size, const u8 *key, u8 hlid, u32 tx_seq_32, | 
|  | u16 tx_seq_16) | 
|  | { | 
|  | struct wl1271_cmd_set_ap_keys *cmd; | 
|  | int ret = 0; | 
|  | u8 lid_type; | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (hlid == WL1271_AP_BROADCAST_HLID) { | 
|  | if (key_type == KEY_WEP) | 
|  | lid_type = WEP_DEFAULT_LID_TYPE; | 
|  | else | 
|  | lid_type = BROADCAST_LID_TYPE; | 
|  | } else { | 
|  | lid_type = UNICAST_LID_TYPE; | 
|  | } | 
|  |  | 
|  | wl1271_debug(DEBUG_CRYPT, "ap key action: %d id: %d lid: %d type: %d" | 
|  | " hlid: %d", (int)action, (int)id, (int)lid_type, | 
|  | (int)key_type, (int)hlid); | 
|  |  | 
|  | cmd->lid_key_type = lid_type; | 
|  | cmd->hlid = hlid; | 
|  | cmd->key_action = cpu_to_le16(action); | 
|  | cmd->key_size = key_size; | 
|  | cmd->key_type = key_type; | 
|  | cmd->key_id = id; | 
|  | cmd->ac_seq_num16[0] = cpu_to_le16(tx_seq_16); | 
|  | cmd->ac_seq_num32[0] = cpu_to_le32(tx_seq_32); | 
|  |  | 
|  | if (key_type == KEY_TKIP) { | 
|  | /* | 
|  | * We get the key in the following form: | 
|  | * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes) | 
|  | * but the target is expecting: | 
|  | * TKIP - RX MIC - TX MIC | 
|  | */ | 
|  | memcpy(cmd->key, key, 16); | 
|  | memcpy(cmd->key + 16, key + 24, 8); | 
|  | memcpy(cmd->key + 24, key + 16, 8); | 
|  | } else { | 
|  | memcpy(cmd->key, key, key_size); | 
|  | } | 
|  |  | 
|  | wl1271_dump(DEBUG_CRYPT, "TARGET AP KEY: ", cmd, sizeof(*cmd)); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_warning("could not set ap keys"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_disconnect(struct wl1271 *wl) | 
|  | { | 
|  | struct wl1271_cmd_disconnect *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd disconnect"); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->rx_config_options = cpu_to_le32(wl->rx_config); | 
|  | cmd->rx_filter_options = cpu_to_le32(wl->rx_filter); | 
|  | /* disconnect reason is not used in immediate disconnections */ | 
|  | cmd->type = DISCONNECT_IMMEDIATE; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_DISCONNECT, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("failed to send disconnect command"); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | ret = wl1271_cmd_wait_for_event(wl, DISCONNECT_EVENT_COMPLETE_ID); | 
|  | if (ret < 0) | 
|  | wl1271_error("cmd disconnect event completion error"); | 
|  |  | 
|  | out_free: | 
|  | kfree(cmd); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_set_sta_state(struct wl1271 *wl) | 
|  | { | 
|  | struct wl1271_cmd_set_sta_state *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd set sta state"); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->state = WL1271_CMD_STA_STATE_CONNECTED; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SET_STA_STATE, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("failed to send set STA state command"); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | out_free: | 
|  | kfree(cmd); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_start_bss(struct wl1271 *wl) | 
|  | { | 
|  | struct wl1271_cmd_bss_start *cmd; | 
|  | struct ieee80211_bss_conf *bss_conf = &wl->vif->bss_conf; | 
|  | int ret; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd start bss"); | 
|  |  | 
|  | /* | 
|  | * FIXME: We currently do not support hidden SSID. The real SSID | 
|  | * should be fetched from mac80211 first. | 
|  | */ | 
|  | if (wl->ssid_len == 0) { | 
|  | wl1271_warning("Hidden SSID currently not supported for AP"); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | memcpy(cmd->bssid, bss_conf->bssid, ETH_ALEN); | 
|  |  | 
|  | cmd->aging_period = cpu_to_le16(WL1271_AP_DEF_INACTIV_SEC); | 
|  | cmd->bss_index = WL1271_AP_BSS_INDEX; | 
|  | cmd->global_hlid = WL1271_AP_GLOBAL_HLID; | 
|  | cmd->broadcast_hlid = WL1271_AP_BROADCAST_HLID; | 
|  | cmd->basic_rate_set = cpu_to_le32(wl->basic_rate_set); | 
|  | cmd->beacon_interval = cpu_to_le16(wl->beacon_int); | 
|  | cmd->dtim_interval = bss_conf->dtim_period; | 
|  | cmd->beacon_expiry = WL1271_AP_DEF_BEACON_EXP; | 
|  | cmd->channel = wl->channel; | 
|  | cmd->ssid_len = wl->ssid_len; | 
|  | cmd->ssid_type = SSID_TYPE_PUBLIC; | 
|  | memcpy(cmd->ssid, wl->ssid, wl->ssid_len); | 
|  |  | 
|  | switch (wl->band) { | 
|  | case IEEE80211_BAND_2GHZ: | 
|  | cmd->band = RADIO_BAND_2_4GHZ; | 
|  | break; | 
|  | case IEEE80211_BAND_5GHZ: | 
|  | cmd->band = RADIO_BAND_5GHZ; | 
|  | break; | 
|  | default: | 
|  | wl1271_warning("bss start - unknown band: %d", (int)wl->band); | 
|  | cmd->band = RADIO_BAND_2_4GHZ; | 
|  | break; | 
|  | } | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_BSS_START, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("failed to initiate cmd start bss"); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | out_free: | 
|  | kfree(cmd); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_stop_bss(struct wl1271 *wl) | 
|  | { | 
|  | struct wl1271_cmd_bss_start *cmd; | 
|  | int ret; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd stop bss"); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->bss_index = WL1271_AP_BSS_INDEX; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_BSS_STOP, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("failed to initiate cmd stop bss"); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | out_free: | 
|  | kfree(cmd); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_add_sta(struct wl1271 *wl, struct ieee80211_sta *sta, u8 hlid) | 
|  | { | 
|  | struct wl1271_cmd_add_sta *cmd; | 
|  | int ret; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd add sta %d", (int)hlid); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* currently we don't support UAPSD */ | 
|  | cmd->sp_len = 0; | 
|  |  | 
|  | memcpy(cmd->addr, sta->addr, ETH_ALEN); | 
|  | cmd->bss_index = WL1271_AP_BSS_INDEX; | 
|  | cmd->aid = sta->aid; | 
|  | cmd->hlid = hlid; | 
|  |  | 
|  | /* | 
|  | * FIXME: Does STA support QOS? We need to propagate this info from | 
|  | * hostapd. Currently not that important since this is only used for | 
|  | * sending the correct flavor of null-data packet in response to a | 
|  | * trigger. | 
|  | */ | 
|  | cmd->wmm = 0; | 
|  |  | 
|  | cmd->supported_rates = cpu_to_le32(wl1271_tx_enabled_rates_get(wl, | 
|  | sta->supp_rates[wl->band])); | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "new sta rates: 0x%x", cmd->supported_rates); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_ADD_STA, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("failed to initiate cmd add sta"); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | out_free: | 
|  | kfree(cmd); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_remove_sta(struct wl1271 *wl, u8 hlid) | 
|  | { | 
|  | struct wl1271_cmd_remove_sta *cmd; | 
|  | int ret; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd remove sta %d", (int)hlid); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->hlid = hlid; | 
|  | /* We never send a deauth, mac80211 is in charge of this */ | 
|  | cmd->reason_opcode = 0; | 
|  | cmd->send_deauth_flag = 0; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_REMOVE_STA, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) { | 
|  | wl1271_error("failed to initiate cmd remove sta"); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We are ok with a timeout here. The event is sometimes not sent | 
|  | * due to a firmware bug. | 
|  | */ | 
|  | wl1271_cmd_wait_for_event_or_timeout(wl, STA_REMOVE_COMPLETE_EVENT_ID); | 
|  |  | 
|  | out_free: | 
|  | kfree(cmd); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } |