|  | /* | 
|  | * This file is part of wl1271 | 
|  | * | 
|  | * Copyright (C) 2009 Nokia Corporation | 
|  | * | 
|  | * Contact: Luciano Coelho <luciano.coelho@nokia.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/gfp.h> | 
|  |  | 
|  | #include "wl12xx.h" | 
|  | #include "acx.h" | 
|  | #include "reg.h" | 
|  | #include "rx.h" | 
|  | #include "io.h" | 
|  |  | 
|  | static u8 wl1271_rx_get_mem_block(struct wl1271_fw_common_status *status, | 
|  | u32 drv_rx_counter) | 
|  | { | 
|  | return le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) & | 
|  | RX_MEM_BLOCK_MASK; | 
|  | } | 
|  |  | 
|  | static u32 wl1271_rx_get_buf_size(struct wl1271_fw_common_status *status, | 
|  | u32 drv_rx_counter) | 
|  | { | 
|  | return (le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) & | 
|  | RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV; | 
|  | } | 
|  |  | 
|  | static void wl1271_rx_status(struct wl1271 *wl, | 
|  | struct wl1271_rx_descriptor *desc, | 
|  | struct ieee80211_rx_status *status, | 
|  | u8 beacon) | 
|  | { | 
|  | memset(status, 0, sizeof(struct ieee80211_rx_status)); | 
|  |  | 
|  | if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG) | 
|  | status->band = IEEE80211_BAND_2GHZ; | 
|  | else | 
|  | status->band = IEEE80211_BAND_5GHZ; | 
|  |  | 
|  | status->rate_idx = wl1271_rate_to_idx(desc->rate, status->band); | 
|  |  | 
|  | #ifdef CONFIG_WL12XX_HT | 
|  | /* 11n support */ | 
|  | if (desc->rate <= CONF_HW_RXTX_RATE_MCS0) | 
|  | status->flag |= RX_FLAG_HT; | 
|  | #endif | 
|  |  | 
|  | status->signal = desc->rssi; | 
|  |  | 
|  | /* | 
|  | * FIXME: In wl1251, the SNR should be divided by two.  In wl1271 we | 
|  | * need to divide by two for now, but TI has been discussing about | 
|  | * changing it.  This needs to be rechecked. | 
|  | */ | 
|  | wl->noise = desc->rssi - (desc->snr >> 1); | 
|  |  | 
|  | status->freq = ieee80211_channel_to_frequency(desc->channel, | 
|  | status->band); | 
|  |  | 
|  | if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) { | 
|  | u8 desc_err_code = desc->status & WL1271_RX_DESC_STATUS_MASK; | 
|  |  | 
|  | status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED | | 
|  | RX_FLAG_DECRYPTED; | 
|  |  | 
|  | if (unlikely(desc_err_code == WL1271_RX_DESC_MIC_FAIL)) { | 
|  | status->flag |= RX_FLAG_MMIC_ERROR; | 
|  | wl1271_warning("Michael MIC error"); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length) | 
|  | { | 
|  | struct wl1271_rx_descriptor *desc; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_hdr *hdr; | 
|  | u8 *buf; | 
|  | u8 beacon = 0; | 
|  |  | 
|  | /* | 
|  | * In PLT mode we seem to get frames and mac80211 warns about them, | 
|  | * workaround this by not retrieving them at all. | 
|  | */ | 
|  | if (unlikely(wl->state == WL1271_STATE_PLT)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* the data read starts with the descriptor */ | 
|  | desc = (struct wl1271_rx_descriptor *) data; | 
|  |  | 
|  | switch (desc->status & WL1271_RX_DESC_STATUS_MASK) { | 
|  | /* discard corrupted packets */ | 
|  | case WL1271_RX_DESC_DRIVER_RX_Q_FAIL: | 
|  | case WL1271_RX_DESC_DECRYPT_FAIL: | 
|  | wl1271_warning("corrupted packet in RX with status: 0x%x", | 
|  | desc->status & WL1271_RX_DESC_STATUS_MASK); | 
|  | return -EINVAL; | 
|  | case WL1271_RX_DESC_SUCCESS: | 
|  | case WL1271_RX_DESC_MIC_FAIL: | 
|  | break; | 
|  | default: | 
|  | wl1271_error("invalid RX descriptor status: 0x%x", | 
|  | desc->status & WL1271_RX_DESC_STATUS_MASK); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | skb = __dev_alloc_skb(length, GFP_KERNEL); | 
|  | if (!skb) { | 
|  | wl1271_error("Couldn't allocate RX frame"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | buf = skb_put(skb, length); | 
|  | memcpy(buf, data, length); | 
|  |  | 
|  | /* now we pull the descriptor out of the buffer */ | 
|  | skb_pull(skb, sizeof(*desc)); | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *)skb->data; | 
|  | if (ieee80211_is_beacon(hdr->frame_control)) | 
|  | beacon = 1; | 
|  |  | 
|  | wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon); | 
|  |  | 
|  | wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, | 
|  | skb->len - desc->pad_len, | 
|  | beacon ? "beacon" : ""); | 
|  |  | 
|  | skb_trim(skb, skb->len - desc->pad_len); | 
|  |  | 
|  | skb_queue_tail(&wl->deferred_rx_queue, skb); | 
|  | ieee80211_queue_work(wl->hw, &wl->netstack_work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_common_status *status) | 
|  | { | 
|  | struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map; | 
|  | u32 buf_size; | 
|  | u32 fw_rx_counter  = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK; | 
|  | u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK; | 
|  | u32 rx_counter; | 
|  | u32 mem_block; | 
|  | u32 pkt_length; | 
|  | u32 pkt_offset; | 
|  |  | 
|  | while (drv_rx_counter != fw_rx_counter) { | 
|  | buf_size = 0; | 
|  | rx_counter = drv_rx_counter; | 
|  | while (rx_counter != fw_rx_counter) { | 
|  | pkt_length = wl1271_rx_get_buf_size(status, rx_counter); | 
|  | if (buf_size + pkt_length > WL1271_AGGR_BUFFER_SIZE) | 
|  | break; | 
|  | buf_size += pkt_length; | 
|  | rx_counter++; | 
|  | rx_counter &= NUM_RX_PKT_DESC_MOD_MASK; | 
|  | } | 
|  |  | 
|  | if (buf_size == 0) { | 
|  | wl1271_warning("received empty data"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (wl->chip.id != CHIP_ID_1283_PG20) { | 
|  | /* | 
|  | * Choose the block we want to read | 
|  | * For aggregated packets, only the first memory block | 
|  | * should be retrieved. The FW takes care of the rest. | 
|  | */ | 
|  | mem_block = wl1271_rx_get_mem_block(status, | 
|  | drv_rx_counter); | 
|  |  | 
|  | wl->rx_mem_pool_addr.addr = (mem_block << 8) + | 
|  | le32_to_cpu(wl_mem_map->packet_memory_pool_start); | 
|  |  | 
|  | wl->rx_mem_pool_addr.addr_extra = | 
|  | wl->rx_mem_pool_addr.addr + 4; | 
|  |  | 
|  | wl1271_write(wl, WL1271_SLV_REG_DATA, | 
|  | &wl->rx_mem_pool_addr, | 
|  | sizeof(wl->rx_mem_pool_addr), false); | 
|  | } | 
|  |  | 
|  | /* Read all available packets at once */ | 
|  | wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf, | 
|  | buf_size, true); | 
|  |  | 
|  | /* Split data into separate packets */ | 
|  | pkt_offset = 0; | 
|  | while (pkt_offset < buf_size) { | 
|  | pkt_length = wl1271_rx_get_buf_size(status, | 
|  | drv_rx_counter); | 
|  | /* | 
|  | * the handle data call can only fail in memory-outage | 
|  | * conditions, in that case the received frame will just | 
|  | * be dropped. | 
|  | */ | 
|  | wl1271_rx_handle_data(wl, | 
|  | wl->aggr_buf + pkt_offset, | 
|  | pkt_length); | 
|  | wl->rx_counter++; | 
|  | drv_rx_counter++; | 
|  | drv_rx_counter &= NUM_RX_PKT_DESC_MOD_MASK; | 
|  | pkt_offset += pkt_length; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write the driver's packet counter to the FW. This is only required | 
|  | * for older hardware revisions | 
|  | */ | 
|  | if (wl->quirks & WL12XX_QUIRK_END_OF_TRANSACTION) | 
|  | wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter); | 
|  | } | 
|  |  | 
|  | void wl1271_set_default_filters(struct wl1271 *wl) | 
|  | { | 
|  | if (wl->bss_type == BSS_TYPE_AP_BSS) { | 
|  | wl->rx_config = WL1271_DEFAULT_AP_RX_CONFIG; | 
|  | wl->rx_filter = WL1271_DEFAULT_AP_RX_FILTER; | 
|  | } else { | 
|  | wl->rx_config = WL1271_DEFAULT_STA_RX_CONFIG; | 
|  | wl->rx_filter = WL1271_DEFAULT_STA_RX_FILTER; | 
|  | } | 
|  | } |