|  | /* | 
|  | * This file is part of wl1271 | 
|  | * | 
|  | * Copyright (C) 2009-2010 Nokia Corporation | 
|  | * | 
|  | * Contact: Luciano Coelho <luciano.coelho@nokia.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/irq.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/crc7.h> | 
|  | #include <linux/vmalloc.h> | 
|  | #include <linux/mmc/sdio_func.h> | 
|  | #include <linux/mmc/sdio_ids.h> | 
|  | #include <linux/mmc/card.h> | 
|  | #include <linux/mmc/host.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/wl12xx.h> | 
|  | #include <linux/pm_runtime.h> | 
|  |  | 
|  | #include "wl12xx.h" | 
|  | #include "wl12xx_80211.h" | 
|  | #include "io.h" | 
|  |  | 
|  | #ifndef SDIO_VENDOR_ID_TI | 
|  | #define SDIO_VENDOR_ID_TI		0x0097 | 
|  | #endif | 
|  |  | 
|  | #ifndef SDIO_DEVICE_ID_TI_WL1271 | 
|  | #define SDIO_DEVICE_ID_TI_WL1271	0x4076 | 
|  | #endif | 
|  |  | 
|  | static const struct sdio_device_id wl1271_devices[] = { | 
|  | { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(sdio, wl1271_devices); | 
|  |  | 
|  | static void wl1271_sdio_set_block_size(struct wl1271 *wl, unsigned int blksz) | 
|  | { | 
|  | sdio_claim_host(wl->if_priv); | 
|  | sdio_set_block_size(wl->if_priv, blksz); | 
|  | sdio_release_host(wl->if_priv); | 
|  | } | 
|  |  | 
|  | static inline struct sdio_func *wl_to_func(struct wl1271 *wl) | 
|  | { | 
|  | return wl->if_priv; | 
|  | } | 
|  |  | 
|  | static struct device *wl1271_sdio_wl_to_dev(struct wl1271 *wl) | 
|  | { | 
|  | return &(wl_to_func(wl)->dev); | 
|  | } | 
|  |  | 
|  | static irqreturn_t wl1271_hardirq(int irq, void *cookie) | 
|  | { | 
|  | struct wl1271 *wl = cookie; | 
|  | unsigned long flags; | 
|  |  | 
|  | wl1271_debug(DEBUG_IRQ, "IRQ"); | 
|  |  | 
|  | /* complete the ELP completion */ | 
|  | spin_lock_irqsave(&wl->wl_lock, flags); | 
|  | set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags); | 
|  | if (wl->elp_compl) { | 
|  | complete(wl->elp_compl); | 
|  | wl->elp_compl = NULL; | 
|  | } | 
|  |  | 
|  | if (test_bit(WL1271_FLAG_SUSPENDED, &wl->flags)) { | 
|  | /* don't enqueue a work right now. mark it as pending */ | 
|  | set_bit(WL1271_FLAG_PENDING_WORK, &wl->flags); | 
|  | wl1271_debug(DEBUG_IRQ, "should not enqueue work"); | 
|  | disable_irq_nosync(wl->irq); | 
|  | pm_wakeup_event(wl1271_sdio_wl_to_dev(wl), 0); | 
|  | spin_unlock_irqrestore(&wl->wl_lock, flags); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  | spin_unlock_irqrestore(&wl->wl_lock, flags); | 
|  |  | 
|  | return IRQ_WAKE_THREAD; | 
|  | } | 
|  |  | 
|  | static void wl1271_sdio_disable_interrupts(struct wl1271 *wl) | 
|  | { | 
|  | disable_irq(wl->irq); | 
|  | } | 
|  |  | 
|  | static void wl1271_sdio_enable_interrupts(struct wl1271 *wl) | 
|  | { | 
|  | enable_irq(wl->irq); | 
|  | } | 
|  |  | 
|  | static void wl1271_sdio_reset(struct wl1271 *wl) | 
|  | { | 
|  | } | 
|  |  | 
|  | static void wl1271_sdio_init(struct wl1271 *wl) | 
|  | { | 
|  | } | 
|  |  | 
|  | static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf, | 
|  | size_t len, bool fixed) | 
|  | { | 
|  | int ret; | 
|  | struct sdio_func *func = wl_to_func(wl); | 
|  |  | 
|  | if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { | 
|  | ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret); | 
|  | wl1271_debug(DEBUG_SDIO, "sdio read 52 addr 0x%x, byte 0x%02x", | 
|  | addr, ((u8 *)buf)[0]); | 
|  | } else { | 
|  | if (fixed) | 
|  | ret = sdio_readsb(func, buf, addr, len); | 
|  | else | 
|  | ret = sdio_memcpy_fromio(func, buf, addr, len); | 
|  |  | 
|  | wl1271_debug(DEBUG_SDIO, "sdio read 53 addr 0x%x, %zu bytes", | 
|  | addr, len); | 
|  | wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len); | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | wl1271_error("sdio read failed (%d)", ret); | 
|  | } | 
|  |  | 
|  | static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf, | 
|  | size_t len, bool fixed) | 
|  | { | 
|  | int ret; | 
|  | struct sdio_func *func = wl_to_func(wl); | 
|  |  | 
|  | if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { | 
|  | sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret); | 
|  | wl1271_debug(DEBUG_SDIO, "sdio write 52 addr 0x%x, byte 0x%02x", | 
|  | addr, ((u8 *)buf)[0]); | 
|  | } else { | 
|  | wl1271_debug(DEBUG_SDIO, "sdio write 53 addr 0x%x, %zu bytes", | 
|  | addr, len); | 
|  | wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len); | 
|  |  | 
|  | if (fixed) | 
|  | ret = sdio_writesb(func, addr, buf, len); | 
|  | else | 
|  | ret = sdio_memcpy_toio(func, addr, buf, len); | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | wl1271_error("sdio write failed (%d)", ret); | 
|  | } | 
|  |  | 
|  | static int wl1271_sdio_power_on(struct wl1271 *wl) | 
|  | { | 
|  | struct sdio_func *func = wl_to_func(wl); | 
|  | int ret; | 
|  |  | 
|  | /* Make sure the card will not be powered off by runtime PM */ | 
|  | ret = pm_runtime_get_sync(&func->dev); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | /* Runtime PM might be disabled, so power up the card manually */ | 
|  | ret = mmc_power_restore_host(func->card->host); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | sdio_claim_host(func); | 
|  | sdio_enable_func(func); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int wl1271_sdio_power_off(struct wl1271 *wl) | 
|  | { | 
|  | struct sdio_func *func = wl_to_func(wl); | 
|  | int ret; | 
|  |  | 
|  | sdio_disable_func(func); | 
|  | sdio_release_host(func); | 
|  |  | 
|  | /* Runtime PM might be disabled, so power off the card manually */ | 
|  | ret = mmc_power_save_host(func->card->host); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* Let runtime PM know the card is powered off */ | 
|  | return pm_runtime_put_sync(&func->dev); | 
|  | } | 
|  |  | 
|  | static int wl1271_sdio_set_power(struct wl1271 *wl, bool enable) | 
|  | { | 
|  | if (enable) | 
|  | return wl1271_sdio_power_on(wl); | 
|  | else | 
|  | return wl1271_sdio_power_off(wl); | 
|  | } | 
|  |  | 
|  | static struct wl1271_if_operations sdio_ops = { | 
|  | .read		= wl1271_sdio_raw_read, | 
|  | .write		= wl1271_sdio_raw_write, | 
|  | .reset		= wl1271_sdio_reset, | 
|  | .init		= wl1271_sdio_init, | 
|  | .power		= wl1271_sdio_set_power, | 
|  | .dev		= wl1271_sdio_wl_to_dev, | 
|  | .enable_irq	= wl1271_sdio_enable_interrupts, | 
|  | .disable_irq	= wl1271_sdio_disable_interrupts, | 
|  | .set_block_size = wl1271_sdio_set_block_size, | 
|  | }; | 
|  |  | 
|  | static int __devinit wl1271_probe(struct sdio_func *func, | 
|  | const struct sdio_device_id *id) | 
|  | { | 
|  | struct ieee80211_hw *hw; | 
|  | const struct wl12xx_platform_data *wlan_data; | 
|  | struct wl1271 *wl; | 
|  | unsigned long irqflags; | 
|  | mmc_pm_flag_t mmcflags; | 
|  | int ret; | 
|  |  | 
|  | /* We are only able to handle the wlan function */ | 
|  | if (func->num != 0x02) | 
|  | return -ENODEV; | 
|  |  | 
|  | hw = wl1271_alloc_hw(); | 
|  | if (IS_ERR(hw)) | 
|  | return PTR_ERR(hw); | 
|  |  | 
|  | wl = hw->priv; | 
|  |  | 
|  | wl->if_priv = func; | 
|  | wl->if_ops = &sdio_ops; | 
|  |  | 
|  | /* Grab access to FN0 for ELP reg. */ | 
|  | func->card->quirks |= MMC_QUIRK_LENIENT_FN0; | 
|  |  | 
|  | /* Use block mode for transferring over one block size of data */ | 
|  | func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; | 
|  |  | 
|  | wlan_data = wl12xx_get_platform_data(); | 
|  | if (IS_ERR(wlan_data)) { | 
|  | ret = PTR_ERR(wlan_data); | 
|  | wl1271_error("missing wlan platform data: %d", ret); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | wl->irq = wlan_data->irq; | 
|  | wl->ref_clock = wlan_data->board_ref_clock; | 
|  | wl->tcxo_clock = wlan_data->board_tcxo_clock; | 
|  | wl->platform_quirks = wlan_data->platform_quirks; | 
|  |  | 
|  | if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) | 
|  | irqflags = IRQF_TRIGGER_RISING; | 
|  | else | 
|  | irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT; | 
|  |  | 
|  | ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq, | 
|  | irqflags, | 
|  | DRIVER_NAME, wl); | 
|  | if (ret < 0) { | 
|  | wl1271_error("request_irq() failed: %d", ret); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | enable_irq_wake(wl->irq); | 
|  | device_init_wakeup(wl1271_sdio_wl_to_dev(wl), 1); | 
|  |  | 
|  | disable_irq(wl->irq); | 
|  |  | 
|  | /* if sdio can keep power while host is suspended, enable wow */ | 
|  | mmcflags = sdio_get_host_pm_caps(func); | 
|  | wl1271_debug(DEBUG_SDIO, "sdio PM caps = 0x%x", mmcflags); | 
|  |  | 
|  | if (mmcflags & MMC_PM_KEEP_POWER) | 
|  | hw->wiphy->wowlan.flags = WIPHY_WOWLAN_ANY; | 
|  |  | 
|  | ret = wl1271_init_ieee80211(wl); | 
|  | if (ret) | 
|  | goto out_irq; | 
|  |  | 
|  | ret = wl1271_register_hw(wl); | 
|  | if (ret) | 
|  | goto out_irq; | 
|  |  | 
|  | sdio_set_drvdata(func, wl); | 
|  |  | 
|  | /* Tell PM core that we don't need the card to be powered now */ | 
|  | pm_runtime_put_noidle(&func->dev); | 
|  |  | 
|  | wl1271_notice("initialized"); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_irq: | 
|  | free_irq(wl->irq, wl); | 
|  |  | 
|  | out_free: | 
|  | wl1271_free_hw(wl); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __devexit wl1271_remove(struct sdio_func *func) | 
|  | { | 
|  | struct wl1271 *wl = sdio_get_drvdata(func); | 
|  |  | 
|  | /* Undo decrement done above in wl1271_probe */ | 
|  | pm_runtime_get_noresume(&func->dev); | 
|  |  | 
|  | wl1271_unregister_hw(wl); | 
|  | device_init_wakeup(wl1271_sdio_wl_to_dev(wl), 0); | 
|  | disable_irq_wake(wl->irq); | 
|  | free_irq(wl->irq, wl); | 
|  | wl1271_free_hw(wl); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int wl1271_suspend(struct device *dev) | 
|  | { | 
|  | /* Tell MMC/SDIO core it's OK to power down the card | 
|  | * (if it isn't already), but not to remove it completely */ | 
|  | struct sdio_func *func = dev_to_sdio_func(dev); | 
|  | struct wl1271 *wl = sdio_get_drvdata(func); | 
|  | mmc_pm_flag_t sdio_flags; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_MAC80211, "wl1271 suspend. wow_enabled: %d", | 
|  | wl->wow_enabled); | 
|  |  | 
|  | /* check whether sdio should keep power */ | 
|  | if (wl->wow_enabled) { | 
|  | sdio_flags = sdio_get_host_pm_caps(func); | 
|  |  | 
|  | if (!(sdio_flags & MMC_PM_KEEP_POWER)) { | 
|  | wl1271_error("can't keep power while host " | 
|  | "is suspended"); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* keep power while host suspended */ | 
|  | ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); | 
|  | if (ret) { | 
|  | wl1271_error("error while trying to keep power"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* release host */ | 
|  | sdio_release_host(func); | 
|  | } | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int wl1271_resume(struct device *dev) | 
|  | { | 
|  | struct sdio_func *func = dev_to_sdio_func(dev); | 
|  | struct wl1271 *wl = sdio_get_drvdata(func); | 
|  |  | 
|  | wl1271_debug(DEBUG_MAC80211, "wl1271 resume"); | 
|  | if (wl->wow_enabled) { | 
|  | /* claim back host */ | 
|  | sdio_claim_host(func); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops wl1271_sdio_pm_ops = { | 
|  | .suspend	= wl1271_suspend, | 
|  | .resume		= wl1271_resume, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static struct sdio_driver wl1271_sdio_driver = { | 
|  | .name		= "wl1271_sdio", | 
|  | .id_table	= wl1271_devices, | 
|  | .probe		= wl1271_probe, | 
|  | .remove		= __devexit_p(wl1271_remove), | 
|  | #ifdef CONFIG_PM | 
|  | .drv = { | 
|  | .pm = &wl1271_sdio_pm_ops, | 
|  | }, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static int __init wl1271_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = sdio_register_driver(&wl1271_sdio_driver); | 
|  | if (ret < 0) { | 
|  | wl1271_error("failed to register sdio driver: %d", ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit wl1271_exit(void) | 
|  | { | 
|  | sdio_unregister_driver(&wl1271_sdio_driver); | 
|  |  | 
|  | wl1271_notice("unloaded"); | 
|  | } | 
|  |  | 
|  | module_init(wl1271_init); | 
|  | module_exit(wl1271_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); | 
|  | MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>"); | 
|  | MODULE_FIRMWARE(WL1271_FW_NAME); | 
|  | MODULE_FIRMWARE(WL128X_FW_NAME); | 
|  | MODULE_FIRMWARE(WL127X_AP_FW_NAME); | 
|  | MODULE_FIRMWARE(WL128X_AP_FW_NAME); |