| /* | 
 |  * Wireless utility functions | 
 |  * | 
 |  * Copyright 2007-2009	Johannes Berg <johannes@sipsolutions.net> | 
 |  */ | 
 | #include <linux/bitops.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/slab.h> | 
 | #include <net/cfg80211.h> | 
 | #include <net/ip.h> | 
 | #include "core.h" | 
 |  | 
 | struct ieee80211_rate * | 
 | ieee80211_get_response_rate(struct ieee80211_supported_band *sband, | 
 | 			    u32 basic_rates, int bitrate) | 
 | { | 
 | 	struct ieee80211_rate *result = &sband->bitrates[0]; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < sband->n_bitrates; i++) { | 
 | 		if (!(basic_rates & BIT(i))) | 
 | 			continue; | 
 | 		if (sband->bitrates[i].bitrate > bitrate) | 
 | 			continue; | 
 | 		result = &sband->bitrates[i]; | 
 | 	} | 
 |  | 
 | 	return result; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_get_response_rate); | 
 |  | 
 | int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band) | 
 | { | 
 | 	/* see 802.11 17.3.8.3.2 and Annex J | 
 | 	 * there are overlapping channel numbers in 5GHz and 2GHz bands */ | 
 | 	if (band == IEEE80211_BAND_5GHZ) { | 
 | 		if (chan >= 182 && chan <= 196) | 
 | 			return 4000 + chan * 5; | 
 | 		else | 
 | 			return 5000 + chan * 5; | 
 | 	} else { /* IEEE80211_BAND_2GHZ */ | 
 | 		if (chan == 14) | 
 | 			return 2484; | 
 | 		else if (chan < 14) | 
 | 			return 2407 + chan * 5; | 
 | 		else | 
 | 			return 0; /* not supported */ | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_channel_to_frequency); | 
 |  | 
 | int ieee80211_frequency_to_channel(int freq) | 
 | { | 
 | 	/* see 802.11 17.3.8.3.2 and Annex J */ | 
 | 	if (freq == 2484) | 
 | 		return 14; | 
 | 	else if (freq < 2484) | 
 | 		return (freq - 2407) / 5; | 
 | 	else if (freq >= 4910 && freq <= 4980) | 
 | 		return (freq - 4000) / 5; | 
 | 	else | 
 | 		return (freq - 5000) / 5; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_frequency_to_channel); | 
 |  | 
 | struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, | 
 | 						  int freq) | 
 | { | 
 | 	enum ieee80211_band band; | 
 | 	struct ieee80211_supported_band *sband; | 
 | 	int i; | 
 |  | 
 | 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | 
 | 		sband = wiphy->bands[band]; | 
 |  | 
 | 		if (!sband) | 
 | 			continue; | 
 |  | 
 | 		for (i = 0; i < sband->n_channels; i++) { | 
 | 			if (sband->channels[i].center_freq == freq) | 
 | 				return &sband->channels[i]; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 | EXPORT_SYMBOL(__ieee80211_get_channel); | 
 |  | 
 | static void set_mandatory_flags_band(struct ieee80211_supported_band *sband, | 
 | 				     enum ieee80211_band band) | 
 | { | 
 | 	int i, want; | 
 |  | 
 | 	switch (band) { | 
 | 	case IEEE80211_BAND_5GHZ: | 
 | 		want = 3; | 
 | 		for (i = 0; i < sband->n_bitrates; i++) { | 
 | 			if (sband->bitrates[i].bitrate == 60 || | 
 | 			    sband->bitrates[i].bitrate == 120 || | 
 | 			    sband->bitrates[i].bitrate == 240) { | 
 | 				sband->bitrates[i].flags |= | 
 | 					IEEE80211_RATE_MANDATORY_A; | 
 | 				want--; | 
 | 			} | 
 | 		} | 
 | 		WARN_ON(want); | 
 | 		break; | 
 | 	case IEEE80211_BAND_2GHZ: | 
 | 		want = 7; | 
 | 		for (i = 0; i < sband->n_bitrates; i++) { | 
 | 			if (sband->bitrates[i].bitrate == 10) { | 
 | 				sband->bitrates[i].flags |= | 
 | 					IEEE80211_RATE_MANDATORY_B | | 
 | 					IEEE80211_RATE_MANDATORY_G; | 
 | 				want--; | 
 | 			} | 
 |  | 
 | 			if (sband->bitrates[i].bitrate == 20 || | 
 | 			    sband->bitrates[i].bitrate == 55 || | 
 | 			    sband->bitrates[i].bitrate == 110 || | 
 | 			    sband->bitrates[i].bitrate == 60 || | 
 | 			    sband->bitrates[i].bitrate == 120 || | 
 | 			    sband->bitrates[i].bitrate == 240) { | 
 | 				sband->bitrates[i].flags |= | 
 | 					IEEE80211_RATE_MANDATORY_G; | 
 | 				want--; | 
 | 			} | 
 |  | 
 | 			if (sband->bitrates[i].bitrate != 10 && | 
 | 			    sband->bitrates[i].bitrate != 20 && | 
 | 			    sband->bitrates[i].bitrate != 55 && | 
 | 			    sband->bitrates[i].bitrate != 110) | 
 | 				sband->bitrates[i].flags |= | 
 | 					IEEE80211_RATE_ERP_G; | 
 | 		} | 
 | 		WARN_ON(want != 0 && want != 3 && want != 6); | 
 | 		break; | 
 | 	case IEEE80211_NUM_BANDS: | 
 | 		WARN_ON(1); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | void ieee80211_set_bitrate_flags(struct wiphy *wiphy) | 
 | { | 
 | 	enum ieee80211_band band; | 
 |  | 
 | 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) | 
 | 		if (wiphy->bands[band]) | 
 | 			set_mandatory_flags_band(wiphy->bands[band], band); | 
 | } | 
 |  | 
 | int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev, | 
 | 				   struct key_params *params, int key_idx, | 
 | 				   bool pairwise, const u8 *mac_addr) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	if (key_idx > 5) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!pairwise && mac_addr && !(rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (pairwise && !mac_addr) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* | 
 | 	 * Disallow pairwise keys with non-zero index unless it's WEP | 
 | 	 * or a vendor specific cipher (because current deployments use | 
 | 	 * pairwise WEP keys with non-zero indices and for vendor specific | 
 | 	 * ciphers this should be validated in the driver or hardware level | 
 | 	 * - but 802.11i clearly specifies to use zero) | 
 | 	 */ | 
 | 	if (pairwise && key_idx && | 
 | 	    ((params->cipher == WLAN_CIPHER_SUITE_TKIP) || | 
 | 	     (params->cipher == WLAN_CIPHER_SUITE_CCMP) || | 
 | 	     (params->cipher == WLAN_CIPHER_SUITE_AES_CMAC))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	switch (params->cipher) { | 
 | 	case WLAN_CIPHER_SUITE_WEP40: | 
 | 		if (params->key_len != WLAN_KEY_LEN_WEP40) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_TKIP: | 
 | 		if (params->key_len != WLAN_KEY_LEN_TKIP) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_CCMP: | 
 | 		if (params->key_len != WLAN_KEY_LEN_CCMP) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_WEP104: | 
 | 		if (params->key_len != WLAN_KEY_LEN_WEP104) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_AES_CMAC: | 
 | 		if (params->key_len != WLAN_KEY_LEN_AES_CMAC) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	default: | 
 | 		/* | 
 | 		 * We don't know anything about this algorithm, | 
 | 		 * allow using it -- but the driver must check | 
 | 		 * all parameters! We still check below whether | 
 | 		 * or not the driver supports this algorithm, | 
 | 		 * of course. | 
 | 		 */ | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (params->seq) { | 
 | 		switch (params->cipher) { | 
 | 		case WLAN_CIPHER_SUITE_WEP40: | 
 | 		case WLAN_CIPHER_SUITE_WEP104: | 
 | 			/* These ciphers do not use key sequence */ | 
 | 			return -EINVAL; | 
 | 		case WLAN_CIPHER_SUITE_TKIP: | 
 | 		case WLAN_CIPHER_SUITE_CCMP: | 
 | 		case WLAN_CIPHER_SUITE_AES_CMAC: | 
 | 			if (params->seq_len != 6) | 
 | 				return -EINVAL; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < rdev->wiphy.n_cipher_suites; i++) | 
 | 		if (params->cipher == rdev->wiphy.cipher_suites[i]) | 
 | 			break; | 
 | 	if (i == rdev->wiphy.n_cipher_suites) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ | 
 | /* Ethernet-II snap header (RFC1042 for most EtherTypes) */ | 
 | const unsigned char rfc1042_header[] __aligned(2) = | 
 | 	{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; | 
 | EXPORT_SYMBOL(rfc1042_header); | 
 |  | 
 | /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ | 
 | const unsigned char bridge_tunnel_header[] __aligned(2) = | 
 | 	{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; | 
 | EXPORT_SYMBOL(bridge_tunnel_header); | 
 |  | 
 | unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc) | 
 | { | 
 | 	unsigned int hdrlen = 24; | 
 |  | 
 | 	if (ieee80211_is_data(fc)) { | 
 | 		if (ieee80211_has_a4(fc)) | 
 | 			hdrlen = 30; | 
 | 		if (ieee80211_is_data_qos(fc)) { | 
 | 			hdrlen += IEEE80211_QOS_CTL_LEN; | 
 | 			if (ieee80211_has_order(fc)) | 
 | 				hdrlen += IEEE80211_HT_CTL_LEN; | 
 | 		} | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (ieee80211_is_ctl(fc)) { | 
 | 		/* | 
 | 		 * ACK and CTS are 10 bytes, all others 16. To see how | 
 | 		 * to get this condition consider | 
 | 		 *   subtype mask:   0b0000000011110000 (0x00F0) | 
 | 		 *   ACK subtype:    0b0000000011010000 (0x00D0) | 
 | 		 *   CTS subtype:    0b0000000011000000 (0x00C0) | 
 | 		 *   bits that matter:         ^^^      (0x00E0) | 
 | 		 *   value of those: 0b0000000011000000 (0x00C0) | 
 | 		 */ | 
 | 		if ((fc & cpu_to_le16(0x00E0)) == cpu_to_le16(0x00C0)) | 
 | 			hdrlen = 10; | 
 | 		else | 
 | 			hdrlen = 16; | 
 | 	} | 
 | out: | 
 | 	return hdrlen; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_hdrlen); | 
 |  | 
 | unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb) | 
 | { | 
 | 	const struct ieee80211_hdr *hdr = | 
 | 			(const struct ieee80211_hdr *)skb->data; | 
 | 	unsigned int hdrlen; | 
 |  | 
 | 	if (unlikely(skb->len < 10)) | 
 | 		return 0; | 
 | 	hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
 | 	if (unlikely(hdrlen > skb->len)) | 
 | 		return 0; | 
 | 	return hdrlen; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); | 
 |  | 
 | static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) | 
 | { | 
 | 	int ae = meshhdr->flags & MESH_FLAGS_AE; | 
 | 	/* 7.1.3.5a.2 */ | 
 | 	switch (ae) { | 
 | 	case 0: | 
 | 		return 6; | 
 | 	case MESH_FLAGS_AE_A4: | 
 | 		return 12; | 
 | 	case MESH_FLAGS_AE_A5_A6: | 
 | 		return 18; | 
 | 	case (MESH_FLAGS_AE_A4 | MESH_FLAGS_AE_A5_A6): | 
 | 		return 24; | 
 | 	default: | 
 | 		return 6; | 
 | 	} | 
 | } | 
 |  | 
 | int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, | 
 | 			   enum nl80211_iftype iftype) | 
 | { | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
 | 	u16 hdrlen, ethertype; | 
 | 	u8 *payload; | 
 | 	u8 dst[ETH_ALEN]; | 
 | 	u8 src[ETH_ALEN] __aligned(2); | 
 |  | 
 | 	if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) | 
 | 		return -1; | 
 |  | 
 | 	hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
 |  | 
 | 	/* convert IEEE 802.11 header + possible LLC headers into Ethernet | 
 | 	 * header | 
 | 	 * IEEE 802.11 address fields: | 
 | 	 * ToDS FromDS Addr1 Addr2 Addr3 Addr4 | 
 | 	 *   0     0   DA    SA    BSSID n/a | 
 | 	 *   0     1   DA    BSSID SA    n/a | 
 | 	 *   1     0   BSSID SA    DA    n/a | 
 | 	 *   1     1   RA    TA    DA    SA | 
 | 	 */ | 
 | 	memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN); | 
 | 	memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN); | 
 |  | 
 | 	switch (hdr->frame_control & | 
 | 		cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) { | 
 | 	case cpu_to_le16(IEEE80211_FCTL_TODS): | 
 | 		if (unlikely(iftype != NL80211_IFTYPE_AP && | 
 | 			     iftype != NL80211_IFTYPE_AP_VLAN && | 
 | 			     iftype != NL80211_IFTYPE_P2P_GO)) | 
 | 			return -1; | 
 | 		break; | 
 | 	case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS): | 
 | 		if (unlikely(iftype != NL80211_IFTYPE_WDS && | 
 | 			     iftype != NL80211_IFTYPE_MESH_POINT && | 
 | 			     iftype != NL80211_IFTYPE_AP_VLAN && | 
 | 			     iftype != NL80211_IFTYPE_STATION)) | 
 | 			return -1; | 
 | 		if (iftype == NL80211_IFTYPE_MESH_POINT) { | 
 | 			struct ieee80211s_hdr *meshdr = | 
 | 				(struct ieee80211s_hdr *) (skb->data + hdrlen); | 
 | 			/* make sure meshdr->flags is on the linear part */ | 
 | 			if (!pskb_may_pull(skb, hdrlen + 1)) | 
 | 				return -1; | 
 | 			if (meshdr->flags & MESH_FLAGS_AE_A5_A6) { | 
 | 				skb_copy_bits(skb, hdrlen + | 
 | 					offsetof(struct ieee80211s_hdr, eaddr1), | 
 | 				       	dst, ETH_ALEN); | 
 | 				skb_copy_bits(skb, hdrlen + | 
 | 					offsetof(struct ieee80211s_hdr, eaddr2), | 
 | 				        src, ETH_ALEN); | 
 | 			} | 
 | 			hdrlen += ieee80211_get_mesh_hdrlen(meshdr); | 
 | 		} | 
 | 		break; | 
 | 	case cpu_to_le16(IEEE80211_FCTL_FROMDS): | 
 | 		if ((iftype != NL80211_IFTYPE_STATION && | 
 | 		     iftype != NL80211_IFTYPE_P2P_CLIENT && | 
 | 		     iftype != NL80211_IFTYPE_MESH_POINT) || | 
 | 		    (is_multicast_ether_addr(dst) && | 
 | 		     !compare_ether_addr(src, addr))) | 
 | 			return -1; | 
 | 		if (iftype == NL80211_IFTYPE_MESH_POINT) { | 
 | 			struct ieee80211s_hdr *meshdr = | 
 | 				(struct ieee80211s_hdr *) (skb->data + hdrlen); | 
 | 			/* make sure meshdr->flags is on the linear part */ | 
 | 			if (!pskb_may_pull(skb, hdrlen + 1)) | 
 | 				return -1; | 
 | 			if (meshdr->flags & MESH_FLAGS_AE_A4) | 
 | 				skb_copy_bits(skb, hdrlen + | 
 | 					offsetof(struct ieee80211s_hdr, eaddr1), | 
 | 					src, ETH_ALEN); | 
 | 			hdrlen += ieee80211_get_mesh_hdrlen(meshdr); | 
 | 		} | 
 | 		break; | 
 | 	case cpu_to_le16(0): | 
 | 		if (iftype != NL80211_IFTYPE_ADHOC) | 
 | 			return -1; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (!pskb_may_pull(skb, hdrlen + 8)) | 
 | 		return -1; | 
 |  | 
 | 	payload = skb->data + hdrlen; | 
 | 	ethertype = (payload[6] << 8) | payload[7]; | 
 |  | 
 | 	if (likely((compare_ether_addr(payload, rfc1042_header) == 0 && | 
 | 		    ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || | 
 | 		   compare_ether_addr(payload, bridge_tunnel_header) == 0)) { | 
 | 		/* remove RFC1042 or Bridge-Tunnel encapsulation and | 
 | 		 * replace EtherType */ | 
 | 		skb_pull(skb, hdrlen + 6); | 
 | 		memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); | 
 | 		memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); | 
 | 	} else { | 
 | 		struct ethhdr *ehdr; | 
 | 		__be16 len; | 
 |  | 
 | 		skb_pull(skb, hdrlen); | 
 | 		len = htons(skb->len); | 
 | 		ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr)); | 
 | 		memcpy(ehdr->h_dest, dst, ETH_ALEN); | 
 | 		memcpy(ehdr->h_source, src, ETH_ALEN); | 
 | 		ehdr->h_proto = len; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_data_to_8023); | 
 |  | 
 | int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, | 
 | 			     enum nl80211_iftype iftype, u8 *bssid, bool qos) | 
 | { | 
 | 	struct ieee80211_hdr hdr; | 
 | 	u16 hdrlen, ethertype; | 
 | 	__le16 fc; | 
 | 	const u8 *encaps_data; | 
 | 	int encaps_len, skip_header_bytes; | 
 | 	int nh_pos, h_pos; | 
 | 	int head_need; | 
 |  | 
 | 	if (unlikely(skb->len < ETH_HLEN)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	nh_pos = skb_network_header(skb) - skb->data; | 
 | 	h_pos = skb_transport_header(skb) - skb->data; | 
 |  | 
 | 	/* convert Ethernet header to proper 802.11 header (based on | 
 | 	 * operation mode) */ | 
 | 	ethertype = (skb->data[12] << 8) | skb->data[13]; | 
 | 	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); | 
 |  | 
 | 	switch (iftype) { | 
 | 	case NL80211_IFTYPE_AP: | 
 | 	case NL80211_IFTYPE_AP_VLAN: | 
 | 	case NL80211_IFTYPE_P2P_GO: | 
 | 		fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | 
 | 		/* DA BSSID SA */ | 
 | 		memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
 | 		memcpy(hdr.addr2, addr, ETH_ALEN); | 
 | 		memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 		hdrlen = 24; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_STATION: | 
 | 	case NL80211_IFTYPE_P2P_CLIENT: | 
 | 		fc |= cpu_to_le16(IEEE80211_FCTL_TODS); | 
 | 		/* BSSID SA DA */ | 
 | 		memcpy(hdr.addr1, bssid, ETH_ALEN); | 
 | 		memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 		memcpy(hdr.addr3, skb->data, ETH_ALEN); | 
 | 		hdrlen = 24; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_ADHOC: | 
 | 		/* DA SA BSSID */ | 
 | 		memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
 | 		memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 		memcpy(hdr.addr3, bssid, ETH_ALEN); | 
 | 		hdrlen = 24; | 
 | 		break; | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 |  | 
 | 	if (qos) { | 
 | 		fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); | 
 | 		hdrlen += 2; | 
 | 	} | 
 |  | 
 | 	hdr.frame_control = fc; | 
 | 	hdr.duration_id = 0; | 
 | 	hdr.seq_ctrl = 0; | 
 |  | 
 | 	skip_header_bytes = ETH_HLEN; | 
 | 	if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { | 
 | 		encaps_data = bridge_tunnel_header; | 
 | 		encaps_len = sizeof(bridge_tunnel_header); | 
 | 		skip_header_bytes -= 2; | 
 | 	} else if (ethertype > 0x600) { | 
 | 		encaps_data = rfc1042_header; | 
 | 		encaps_len = sizeof(rfc1042_header); | 
 | 		skip_header_bytes -= 2; | 
 | 	} else { | 
 | 		encaps_data = NULL; | 
 | 		encaps_len = 0; | 
 | 	} | 
 |  | 
 | 	skb_pull(skb, skip_header_bytes); | 
 | 	nh_pos -= skip_header_bytes; | 
 | 	h_pos -= skip_header_bytes; | 
 |  | 
 | 	head_need = hdrlen + encaps_len - skb_headroom(skb); | 
 |  | 
 | 	if (head_need > 0 || skb_cloned(skb)) { | 
 | 		head_need = max(head_need, 0); | 
 | 		if (head_need) | 
 | 			skb_orphan(skb); | 
 |  | 
 | 		if (pskb_expand_head(skb, head_need, 0, GFP_ATOMIC)) { | 
 | 			pr_err("failed to reallocate Tx buffer\n"); | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 		skb->truesize += head_need; | 
 | 	} | 
 |  | 
 | 	if (encaps_data) { | 
 | 		memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); | 
 | 		nh_pos += encaps_len; | 
 | 		h_pos += encaps_len; | 
 | 	} | 
 |  | 
 | 	memcpy(skb_push(skb, hdrlen), &hdr, hdrlen); | 
 |  | 
 | 	nh_pos += hdrlen; | 
 | 	h_pos += hdrlen; | 
 |  | 
 | 	/* Update skb pointers to various headers since this modified frame | 
 | 	 * is going to go through Linux networking code that may potentially | 
 | 	 * need things like pointer to IP header. */ | 
 | 	skb_set_mac_header(skb, 0); | 
 | 	skb_set_network_header(skb, nh_pos); | 
 | 	skb_set_transport_header(skb, h_pos); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_data_from_8023); | 
 |  | 
 |  | 
 | void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, | 
 | 			      const u8 *addr, enum nl80211_iftype iftype, | 
 | 			      const unsigned int extra_headroom, | 
 | 			      bool has_80211_header) | 
 | { | 
 | 	struct sk_buff *frame = NULL; | 
 | 	u16 ethertype; | 
 | 	u8 *payload; | 
 | 	const struct ethhdr *eth; | 
 | 	int remaining, err; | 
 | 	u8 dst[ETH_ALEN], src[ETH_ALEN]; | 
 |  | 
 | 	if (has_80211_header) { | 
 | 		err = ieee80211_data_to_8023(skb, addr, iftype); | 
 | 		if (err) | 
 | 			goto out; | 
 |  | 
 | 		/* skip the wrapping header */ | 
 | 		eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr)); | 
 | 		if (!eth) | 
 | 			goto out; | 
 | 	} else { | 
 | 		eth = (struct ethhdr *) skb->data; | 
 | 	} | 
 |  | 
 | 	while (skb != frame) { | 
 | 		u8 padding; | 
 | 		__be16 len = eth->h_proto; | 
 | 		unsigned int subframe_len = sizeof(struct ethhdr) + ntohs(len); | 
 |  | 
 | 		remaining = skb->len; | 
 | 		memcpy(dst, eth->h_dest, ETH_ALEN); | 
 | 		memcpy(src, eth->h_source, ETH_ALEN); | 
 |  | 
 | 		padding = (4 - subframe_len) & 0x3; | 
 | 		/* the last MSDU has no padding */ | 
 | 		if (subframe_len > remaining) | 
 | 			goto purge; | 
 |  | 
 | 		skb_pull(skb, sizeof(struct ethhdr)); | 
 | 		/* reuse skb for the last subframe */ | 
 | 		if (remaining <= subframe_len + padding) | 
 | 			frame = skb; | 
 | 		else { | 
 | 			unsigned int hlen = ALIGN(extra_headroom, 4); | 
 | 			/* | 
 | 			 * Allocate and reserve two bytes more for payload | 
 | 			 * alignment since sizeof(struct ethhdr) is 14. | 
 | 			 */ | 
 | 			frame = dev_alloc_skb(hlen + subframe_len + 2); | 
 | 			if (!frame) | 
 | 				goto purge; | 
 |  | 
 | 			skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2); | 
 | 			memcpy(skb_put(frame, ntohs(len)), skb->data, | 
 | 				ntohs(len)); | 
 |  | 
 | 			eth = (struct ethhdr *)skb_pull(skb, ntohs(len) + | 
 | 							padding); | 
 | 			if (!eth) { | 
 | 				dev_kfree_skb(frame); | 
 | 				goto purge; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		skb_reset_network_header(frame); | 
 | 		frame->dev = skb->dev; | 
 | 		frame->priority = skb->priority; | 
 |  | 
 | 		payload = frame->data; | 
 | 		ethertype = (payload[6] << 8) | payload[7]; | 
 |  | 
 | 		if (likely((compare_ether_addr(payload, rfc1042_header) == 0 && | 
 | 			    ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || | 
 | 			   compare_ether_addr(payload, | 
 | 					      bridge_tunnel_header) == 0)) { | 
 | 			/* remove RFC1042 or Bridge-Tunnel | 
 | 			 * encapsulation and replace EtherType */ | 
 | 			skb_pull(frame, 6); | 
 | 			memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN); | 
 | 			memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN); | 
 | 		} else { | 
 | 			memcpy(skb_push(frame, sizeof(__be16)), &len, | 
 | 				sizeof(__be16)); | 
 | 			memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN); | 
 | 			memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN); | 
 | 		} | 
 | 		__skb_queue_tail(list, frame); | 
 | 	} | 
 |  | 
 | 	return; | 
 |  | 
 |  purge: | 
 | 	__skb_queue_purge(list); | 
 |  out: | 
 | 	dev_kfree_skb(skb); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_amsdu_to_8023s); | 
 |  | 
 | /* Given a data frame determine the 802.1p/1d tag to use. */ | 
 | unsigned int cfg80211_classify8021d(struct sk_buff *skb) | 
 | { | 
 | 	unsigned int dscp; | 
 |  | 
 | 	/* skb->priority values from 256->263 are magic values to | 
 | 	 * directly indicate a specific 802.1d priority.  This is used | 
 | 	 * to allow 802.1d priority to be passed directly in from VLAN | 
 | 	 * tags, etc. | 
 | 	 */ | 
 | 	if (skb->priority >= 256 && skb->priority <= 263) | 
 | 		return skb->priority - 256; | 
 |  | 
 | 	switch (skb->protocol) { | 
 | 	case htons(ETH_P_IP): | 
 | 		dscp = ip_hdr(skb)->tos & 0xfc; | 
 | 		break; | 
 | 	default: | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return dscp >> 5; | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_classify8021d); | 
 |  | 
 | const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie) | 
 | { | 
 | 	u8 *end, *pos; | 
 |  | 
 | 	pos = bss->information_elements; | 
 | 	if (pos == NULL) | 
 | 		return NULL; | 
 | 	end = pos + bss->len_information_elements; | 
 |  | 
 | 	while (pos + 1 < end) { | 
 | 		if (pos + 2 + pos[1] > end) | 
 | 			break; | 
 | 		if (pos[0] == ie) | 
 | 			return pos; | 
 | 		pos += 2 + pos[1]; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_bss_get_ie); | 
 |  | 
 | void cfg80211_upload_connect_keys(struct wireless_dev *wdev) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); | 
 | 	struct net_device *dev = wdev->netdev; | 
 | 	int i; | 
 |  | 
 | 	if (!wdev->connect_keys) | 
 | 		return; | 
 |  | 
 | 	for (i = 0; i < 6; i++) { | 
 | 		if (!wdev->connect_keys->params[i].cipher) | 
 | 			continue; | 
 | 		if (rdev->ops->add_key(wdev->wiphy, dev, i, false, NULL, | 
 | 					&wdev->connect_keys->params[i])) { | 
 | 			netdev_err(dev, "failed to set key %d\n", i); | 
 | 			continue; | 
 | 		} | 
 | 		if (wdev->connect_keys->def == i) | 
 | 			if (rdev->ops->set_default_key(wdev->wiphy, dev, | 
 | 						       i, true, true)) { | 
 | 				netdev_err(dev, "failed to set defkey %d\n", i); | 
 | 				continue; | 
 | 			} | 
 | 		if (wdev->connect_keys->defmgmt == i) | 
 | 			if (rdev->ops->set_default_mgmt_key(wdev->wiphy, dev, i)) | 
 | 				netdev_err(dev, "failed to set mgtdef %d\n", i); | 
 | 	} | 
 |  | 
 | 	kfree(wdev->connect_keys); | 
 | 	wdev->connect_keys = NULL; | 
 | } | 
 |  | 
 | static void cfg80211_process_wdev_events(struct wireless_dev *wdev) | 
 | { | 
 | 	struct cfg80211_event *ev; | 
 | 	unsigned long flags; | 
 | 	const u8 *bssid = NULL; | 
 |  | 
 | 	spin_lock_irqsave(&wdev->event_lock, flags); | 
 | 	while (!list_empty(&wdev->event_list)) { | 
 | 		ev = list_first_entry(&wdev->event_list, | 
 | 				      struct cfg80211_event, list); | 
 | 		list_del(&ev->list); | 
 | 		spin_unlock_irqrestore(&wdev->event_lock, flags); | 
 |  | 
 | 		wdev_lock(wdev); | 
 | 		switch (ev->type) { | 
 | 		case EVENT_CONNECT_RESULT: | 
 | 			if (!is_zero_ether_addr(ev->cr.bssid)) | 
 | 				bssid = ev->cr.bssid; | 
 | 			__cfg80211_connect_result( | 
 | 				wdev->netdev, bssid, | 
 | 				ev->cr.req_ie, ev->cr.req_ie_len, | 
 | 				ev->cr.resp_ie, ev->cr.resp_ie_len, | 
 | 				ev->cr.status, | 
 | 				ev->cr.status == WLAN_STATUS_SUCCESS, | 
 | 				NULL); | 
 | 			break; | 
 | 		case EVENT_ROAMED: | 
 | 			__cfg80211_roamed(wdev, ev->rm.channel, ev->rm.bssid, | 
 | 					  ev->rm.req_ie, ev->rm.req_ie_len, | 
 | 					  ev->rm.resp_ie, ev->rm.resp_ie_len); | 
 | 			break; | 
 | 		case EVENT_DISCONNECTED: | 
 | 			__cfg80211_disconnected(wdev->netdev, | 
 | 						ev->dc.ie, ev->dc.ie_len, | 
 | 						ev->dc.reason, true); | 
 | 			break; | 
 | 		case EVENT_IBSS_JOINED: | 
 | 			__cfg80211_ibss_joined(wdev->netdev, ev->ij.bssid); | 
 | 			break; | 
 | 		} | 
 | 		wdev_unlock(wdev); | 
 |  | 
 | 		kfree(ev); | 
 |  | 
 | 		spin_lock_irqsave(&wdev->event_lock, flags); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&wdev->event_lock, flags); | 
 | } | 
 |  | 
 | void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev) | 
 | { | 
 | 	struct wireless_dev *wdev; | 
 |  | 
 | 	ASSERT_RTNL(); | 
 | 	ASSERT_RDEV_LOCK(rdev); | 
 |  | 
 | 	mutex_lock(&rdev->devlist_mtx); | 
 |  | 
 | 	list_for_each_entry(wdev, &rdev->netdev_list, list) | 
 | 		cfg80211_process_wdev_events(wdev); | 
 |  | 
 | 	mutex_unlock(&rdev->devlist_mtx); | 
 | } | 
 |  | 
 | int cfg80211_change_iface(struct cfg80211_registered_device *rdev, | 
 | 			  struct net_device *dev, enum nl80211_iftype ntype, | 
 | 			  u32 *flags, struct vif_params *params) | 
 | { | 
 | 	int err; | 
 | 	enum nl80211_iftype otype = dev->ieee80211_ptr->iftype; | 
 |  | 
 | 	ASSERT_RDEV_LOCK(rdev); | 
 |  | 
 | 	/* don't support changing VLANs, you just re-create them */ | 
 | 	if (otype == NL80211_IFTYPE_AP_VLAN) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (!rdev->ops->change_virtual_intf || | 
 | 	    !(rdev->wiphy.interface_modes & (1 << ntype))) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	/* if it's part of a bridge, reject changing type to station/ibss */ | 
 | 	if ((dev->priv_flags & IFF_BRIDGE_PORT) && | 
 | 	    (ntype == NL80211_IFTYPE_ADHOC || | 
 | 	     ntype == NL80211_IFTYPE_STATION || | 
 | 	     ntype == NL80211_IFTYPE_P2P_CLIENT)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (ntype != otype) { | 
 | 		err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr, | 
 | 						    ntype); | 
 | 		if (err) | 
 | 			return err; | 
 |  | 
 | 		dev->ieee80211_ptr->use_4addr = false; | 
 | 		dev->ieee80211_ptr->mesh_id_up_len = 0; | 
 |  | 
 | 		switch (otype) { | 
 | 		case NL80211_IFTYPE_ADHOC: | 
 | 			cfg80211_leave_ibss(rdev, dev, false); | 
 | 			break; | 
 | 		case NL80211_IFTYPE_STATION: | 
 | 		case NL80211_IFTYPE_P2P_CLIENT: | 
 | 			cfg80211_disconnect(rdev, dev, | 
 | 					    WLAN_REASON_DEAUTH_LEAVING, true); | 
 | 			break; | 
 | 		case NL80211_IFTYPE_MESH_POINT: | 
 | 			/* mesh should be handled? */ | 
 | 			break; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		cfg80211_process_rdev_events(rdev); | 
 | 	} | 
 |  | 
 | 	err = rdev->ops->change_virtual_intf(&rdev->wiphy, dev, | 
 | 					     ntype, flags, params); | 
 |  | 
 | 	WARN_ON(!err && dev->ieee80211_ptr->iftype != ntype); | 
 |  | 
 | 	if (!err && params && params->use_4addr != -1) | 
 | 		dev->ieee80211_ptr->use_4addr = params->use_4addr; | 
 |  | 
 | 	if (!err) { | 
 | 		dev->priv_flags &= ~IFF_DONT_BRIDGE; | 
 | 		switch (ntype) { | 
 | 		case NL80211_IFTYPE_STATION: | 
 | 			if (dev->ieee80211_ptr->use_4addr) | 
 | 				break; | 
 | 			/* fall through */ | 
 | 		case NL80211_IFTYPE_P2P_CLIENT: | 
 | 		case NL80211_IFTYPE_ADHOC: | 
 | 			dev->priv_flags |= IFF_DONT_BRIDGE; | 
 | 			break; | 
 | 		case NL80211_IFTYPE_P2P_GO: | 
 | 		case NL80211_IFTYPE_AP: | 
 | 		case NL80211_IFTYPE_AP_VLAN: | 
 | 		case NL80211_IFTYPE_WDS: | 
 | 		case NL80211_IFTYPE_MESH_POINT: | 
 | 			/* bridging OK */ | 
 | 			break; | 
 | 		case NL80211_IFTYPE_MONITOR: | 
 | 			/* monitor can't bridge anyway */ | 
 | 			break; | 
 | 		case NL80211_IFTYPE_UNSPECIFIED: | 
 | 		case NUM_NL80211_IFTYPES: | 
 | 			/* not happening */ | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | u16 cfg80211_calculate_bitrate(struct rate_info *rate) | 
 | { | 
 | 	int modulation, streams, bitrate; | 
 |  | 
 | 	if (!(rate->flags & RATE_INFO_FLAGS_MCS)) | 
 | 		return rate->legacy; | 
 |  | 
 | 	/* the formula below does only work for MCS values smaller than 32 */ | 
 | 	if (rate->mcs >= 32) | 
 | 		return 0; | 
 |  | 
 | 	modulation = rate->mcs & 7; | 
 | 	streams = (rate->mcs >> 3) + 1; | 
 |  | 
 | 	bitrate = (rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) ? | 
 | 			13500000 : 6500000; | 
 |  | 
 | 	if (modulation < 4) | 
 | 		bitrate *= (modulation + 1); | 
 | 	else if (modulation == 4) | 
 | 		bitrate *= (modulation + 2); | 
 | 	else | 
 | 		bitrate *= (modulation + 3); | 
 |  | 
 | 	bitrate *= streams; | 
 |  | 
 | 	if (rate->flags & RATE_INFO_FLAGS_SHORT_GI) | 
 | 		bitrate = (bitrate / 9) * 10; | 
 |  | 
 | 	/* do NOT round down here */ | 
 | 	return (bitrate + 50000) / 100000; | 
 | } | 
 |  | 
 | int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev, | 
 | 				 u32 beacon_int) | 
 | { | 
 | 	struct wireless_dev *wdev; | 
 | 	int res = 0; | 
 |  | 
 | 	if (!beacon_int) | 
 | 		return -EINVAL; | 
 |  | 
 | 	mutex_lock(&rdev->devlist_mtx); | 
 |  | 
 | 	list_for_each_entry(wdev, &rdev->netdev_list, list) { | 
 | 		if (!wdev->beacon_interval) | 
 | 			continue; | 
 | 		if (wdev->beacon_interval != beacon_int) { | 
 | 			res = -EINVAL; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&rdev->devlist_mtx); | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, | 
 | 				  struct wireless_dev *wdev, | 
 | 				  enum nl80211_iftype iftype) | 
 | { | 
 | 	struct wireless_dev *wdev_iter; | 
 | 	int num[NUM_NL80211_IFTYPES]; | 
 | 	int total = 1; | 
 | 	int i, j; | 
 |  | 
 | 	ASSERT_RTNL(); | 
 |  | 
 | 	/* Always allow software iftypes */ | 
 | 	if (rdev->wiphy.software_iftypes & BIT(iftype)) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * Drivers will gradually all set this flag, until all | 
 | 	 * have it we only enforce for those that set it. | 
 | 	 */ | 
 | 	if (!(rdev->wiphy.flags & WIPHY_FLAG_ENFORCE_COMBINATIONS)) | 
 | 		return 0; | 
 |  | 
 | 	memset(num, 0, sizeof(num)); | 
 |  | 
 | 	num[iftype] = 1; | 
 |  | 
 | 	mutex_lock(&rdev->devlist_mtx); | 
 | 	list_for_each_entry(wdev_iter, &rdev->netdev_list, list) { | 
 | 		if (wdev_iter == wdev) | 
 | 			continue; | 
 | 		if (!netif_running(wdev_iter->netdev)) | 
 | 			continue; | 
 |  | 
 | 		if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype)) | 
 | 			continue; | 
 |  | 
 | 		num[wdev_iter->iftype]++; | 
 | 		total++; | 
 | 	} | 
 | 	mutex_unlock(&rdev->devlist_mtx); | 
 |  | 
 | 	for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) { | 
 | 		const struct ieee80211_iface_combination *c; | 
 | 		struct ieee80211_iface_limit *limits; | 
 |  | 
 | 		c = &rdev->wiphy.iface_combinations[i]; | 
 |  | 
 | 		limits = kmemdup(c->limits, sizeof(limits[0]) * c->n_limits, | 
 | 				 GFP_KERNEL); | 
 | 		if (!limits) | 
 | 			return -ENOMEM; | 
 | 		if (total > c->max_interfaces) | 
 | 			goto cont; | 
 |  | 
 | 		for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) { | 
 | 			if (rdev->wiphy.software_iftypes & BIT(iftype)) | 
 | 				continue; | 
 | 			for (j = 0; j < c->n_limits; j++) { | 
 | 				if (!(limits[j].types & iftype)) | 
 | 					continue; | 
 | 				if (limits[j].max < num[iftype]) | 
 | 					goto cont; | 
 | 				limits[j].max -= num[iftype]; | 
 | 			} | 
 | 		} | 
 | 		/* yay, it fits */ | 
 | 		kfree(limits); | 
 | 		return 0; | 
 |  cont: | 
 | 		kfree(limits); | 
 | 	} | 
 |  | 
 | 	return -EBUSY; | 
 | } |