|  | /* | 
|  | * eth1394.c -- Ethernet driver for Linux IEEE-1394 Subsystem | 
|  | * | 
|  | * Copyright (C) 2001-2003 Ben Collins <bcollins@debian.org> | 
|  | *               2000 Bonin Franck <boninf@free.fr> | 
|  | *               2003 Steve Kinneberg <kinnebergsteve@acmsystems.com> | 
|  | * | 
|  | * Mainly based on work by Emanuel Pirker and Andreas E. Bombe | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software Foundation, | 
|  | * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | 
|  | */ | 
|  |  | 
|  | /* This driver intends to support RFC 2734, which describes a method for | 
|  | * transporting IPv4 datagrams over IEEE-1394 serial busses. This driver | 
|  | * will ultimately support that method, but currently falls short in | 
|  | * several areas. | 
|  | * | 
|  | * TODO: | 
|  | * RFC 2734 related: | 
|  | * - Add MCAP. Limited Multicast exists only to 224.0.0.1 and 224.0.0.2. | 
|  | * | 
|  | * Non-RFC 2734 related: | 
|  | * - Handle fragmented skb's coming from the networking layer. | 
|  | * - Move generic GASP reception to core 1394 code | 
|  | * - Convert kmalloc/kfree for link fragments to use kmem_cache_* instead | 
|  | * - Stability improvements | 
|  | * - Performance enhancements | 
|  | * - Consider garbage collecting old partial datagrams after X amount of time | 
|  | */ | 
|  |  | 
|  |  | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include <linux/sched.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/init.h> | 
|  |  | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/inetdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/if_ether.h> | 
|  | #include <linux/ip.h> | 
|  | #include <linux/in.h> | 
|  | #include <linux/tcp.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/delay.h> | 
|  | #include <asm/semaphore.h> | 
|  | #include <net/arp.h> | 
|  |  | 
|  | #include "csr1212.h" | 
|  | #include "ieee1394_types.h" | 
|  | #include "ieee1394_core.h" | 
|  | #include "ieee1394_transactions.h" | 
|  | #include "ieee1394.h" | 
|  | #include "highlevel.h" | 
|  | #include "iso.h" | 
|  | #include "nodemgr.h" | 
|  | #include "eth1394.h" | 
|  | #include "config_roms.h" | 
|  |  | 
|  | #define ETH1394_PRINT_G(level, fmt, args...) \ | 
|  | printk(level "%s: " fmt, driver_name, ## args) | 
|  |  | 
|  | #define ETH1394_PRINT(level, dev_name, fmt, args...) \ | 
|  | printk(level "%s: %s: " fmt, driver_name, dev_name, ## args) | 
|  |  | 
|  | #define DEBUG(fmt, args...) \ | 
|  | printk(KERN_ERR "%s:%s[%d]: " fmt "\n", driver_name, __FUNCTION__, __LINE__, ## args) | 
|  | #define TRACE() printk(KERN_ERR "%s:%s[%d] ---- TRACE\n", driver_name, __FUNCTION__, __LINE__) | 
|  |  | 
|  | static char version[] __devinitdata = | 
|  | "$Rev: 1312 $ Ben Collins <bcollins@debian.org>"; | 
|  |  | 
|  | struct fragment_info { | 
|  | struct list_head list; | 
|  | int offset; | 
|  | int len; | 
|  | }; | 
|  |  | 
|  | struct partial_datagram { | 
|  | struct list_head list; | 
|  | u16 dgl; | 
|  | u16 dg_size; | 
|  | u16 ether_type; | 
|  | struct sk_buff *skb; | 
|  | char *pbuf; | 
|  | struct list_head frag_info; | 
|  | }; | 
|  |  | 
|  | struct pdg_list { | 
|  | struct list_head list;		/* partial datagram list per node	*/ | 
|  | unsigned int sz;		/* partial datagram list size per node	*/ | 
|  | spinlock_t lock;		/* partial datagram lock		*/ | 
|  | }; | 
|  |  | 
|  | struct eth1394_host_info { | 
|  | struct hpsb_host *host; | 
|  | struct net_device *dev; | 
|  | }; | 
|  |  | 
|  | struct eth1394_node_ref { | 
|  | struct unit_directory *ud; | 
|  | struct list_head list; | 
|  | }; | 
|  |  | 
|  | struct eth1394_node_info { | 
|  | u16 maxpayload;			/* Max payload			*/ | 
|  | u8 sspd;			/* Max speed			*/ | 
|  | u64 fifo;			/* FIFO address			*/ | 
|  | struct pdg_list pdg;		/* partial RX datagram lists	*/ | 
|  | int dgl;			/* Outgoing datagram label	*/ | 
|  | }; | 
|  |  | 
|  | /* Our ieee1394 highlevel driver */ | 
|  | #define ETH1394_DRIVER_NAME "eth1394" | 
|  | static const char driver_name[] = ETH1394_DRIVER_NAME; | 
|  |  | 
|  | static kmem_cache_t *packet_task_cache; | 
|  |  | 
|  | static struct hpsb_highlevel eth1394_highlevel; | 
|  |  | 
|  | /* Use common.lf to determine header len */ | 
|  | static const int hdr_type_len[] = { | 
|  | sizeof (struct eth1394_uf_hdr), | 
|  | sizeof (struct eth1394_ff_hdr), | 
|  | sizeof (struct eth1394_sf_hdr), | 
|  | sizeof (struct eth1394_sf_hdr) | 
|  | }; | 
|  |  | 
|  | /* Change this to IEEE1394_SPEED_S100 to make testing easier */ | 
|  | #define ETH1394_SPEED_DEF	IEEE1394_SPEED_MAX | 
|  |  | 
|  | /* For now, this needs to be 1500, so that XP works with us */ | 
|  | #define ETH1394_DATA_LEN	ETH_DATA_LEN | 
|  |  | 
|  | static const u16 eth1394_speedto_maxpayload[] = { | 
|  | /*     S100, S200, S400, S800, S1600, S3200 */ | 
|  | 512, 1024, 2048, 4096,  4096,  4096 | 
|  | }; | 
|  |  | 
|  | MODULE_AUTHOR("Ben Collins (bcollins@debian.org)"); | 
|  | MODULE_DESCRIPTION("IEEE 1394 IPv4 Driver (IPv4-over-1394 as per RFC 2734)"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | /* The max_partial_datagrams parameter is the maximum number of fragmented | 
|  | * datagrams per node that eth1394 will keep in memory.  Providing an upper | 
|  | * bound allows us to limit the amount of memory that partial datagrams | 
|  | * consume in the event that some partial datagrams are never completed. | 
|  | */ | 
|  | static int max_partial_datagrams = 25; | 
|  | module_param(max_partial_datagrams, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(max_partial_datagrams, | 
|  | "Maximum number of partially received fragmented datagrams " | 
|  | "(default = 25)."); | 
|  |  | 
|  |  | 
|  | static int ether1394_header(struct sk_buff *skb, struct net_device *dev, | 
|  | unsigned short type, void *daddr, void *saddr, | 
|  | unsigned len); | 
|  | static int ether1394_rebuild_header(struct sk_buff *skb); | 
|  | static int ether1394_header_parse(struct sk_buff *skb, unsigned char *haddr); | 
|  | static int ether1394_header_cache(struct neighbour *neigh, struct hh_cache *hh); | 
|  | static void ether1394_header_cache_update(struct hh_cache *hh, | 
|  | struct net_device *dev, | 
|  | unsigned char * haddr); | 
|  | static int ether1394_mac_addr(struct net_device *dev, void *p); | 
|  |  | 
|  | static void purge_partial_datagram(struct list_head *old); | 
|  | static int ether1394_tx(struct sk_buff *skb, struct net_device *dev); | 
|  | static void ether1394_iso(struct hpsb_iso *iso); | 
|  |  | 
|  | static struct ethtool_ops ethtool_ops; | 
|  |  | 
|  | static int ether1394_write(struct hpsb_host *host, int srcid, int destid, | 
|  | quadlet_t *data, u64 addr, size_t len, u16 flags); | 
|  | static void ether1394_add_host (struct hpsb_host *host); | 
|  | static void ether1394_remove_host (struct hpsb_host *host); | 
|  | static void ether1394_host_reset (struct hpsb_host *host); | 
|  |  | 
|  | /* Function for incoming 1394 packets */ | 
|  | static struct hpsb_address_ops addr_ops = { | 
|  | .write =	ether1394_write, | 
|  | }; | 
|  |  | 
|  | /* Ieee1394 highlevel driver functions */ | 
|  | static struct hpsb_highlevel eth1394_highlevel = { | 
|  | .name =		driver_name, | 
|  | .add_host =	ether1394_add_host, | 
|  | .remove_host =	ether1394_remove_host, | 
|  | .host_reset =	ether1394_host_reset, | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* This is called after an "ifup" */ | 
|  | static int ether1394_open (struct net_device *dev) | 
|  | { | 
|  | struct eth1394_priv *priv = netdev_priv(dev); | 
|  | int ret = 0; | 
|  |  | 
|  | /* Something bad happened, don't even try */ | 
|  | if (priv->bc_state == ETHER1394_BC_ERROR) { | 
|  | /* we'll try again */ | 
|  | priv->iso = hpsb_iso_recv_init(priv->host, | 
|  | ETHER1394_ISO_BUF_SIZE, | 
|  | ETHER1394_GASP_BUFFERS, | 
|  | priv->broadcast_channel, | 
|  | HPSB_ISO_DMA_PACKET_PER_BUFFER, | 
|  | 1, ether1394_iso); | 
|  | if (priv->iso == NULL) { | 
|  | ETH1394_PRINT(KERN_ERR, dev->name, | 
|  | "Could not allocate isochronous receive " | 
|  | "context for the broadcast channel\n"); | 
|  | priv->bc_state = ETHER1394_BC_ERROR; | 
|  | ret = -EAGAIN; | 
|  | } else { | 
|  | if (hpsb_iso_recv_start(priv->iso, -1, (1 << 3), -1) < 0) | 
|  | priv->bc_state = ETHER1394_BC_STOPPED; | 
|  | else | 
|  | priv->bc_state = ETHER1394_BC_RUNNING; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | netif_start_queue (dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* This is called after an "ifdown" */ | 
|  | static int ether1394_stop (struct net_device *dev) | 
|  | { | 
|  | netif_stop_queue (dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Return statistics to the caller */ | 
|  | static struct net_device_stats *ether1394_stats (struct net_device *dev) | 
|  | { | 
|  | return &(((struct eth1394_priv *)netdev_priv(dev))->stats); | 
|  | } | 
|  |  | 
|  | /* What to do if we timeout. I think a host reset is probably in order, so | 
|  | * that's what we do. Should we increment the stat counters too?  */ | 
|  | static void ether1394_tx_timeout (struct net_device *dev) | 
|  | { | 
|  | ETH1394_PRINT (KERN_ERR, dev->name, "Timeout, resetting host %s\n", | 
|  | ((struct eth1394_priv *)netdev_priv(dev))->host->driver->name); | 
|  |  | 
|  | highlevel_host_reset (((struct eth1394_priv *)netdev_priv(dev))->host); | 
|  |  | 
|  | netif_wake_queue (dev); | 
|  | } | 
|  |  | 
|  | static int ether1394_change_mtu(struct net_device *dev, int new_mtu) | 
|  | { | 
|  | struct eth1394_priv *priv = netdev_priv(dev); | 
|  |  | 
|  | if ((new_mtu < 68) || | 
|  | (new_mtu > min(ETH1394_DATA_LEN, | 
|  | (int)((1 << (priv->host->csr.max_rec + 1)) - | 
|  | (sizeof(union eth1394_hdr) + | 
|  | ETHER1394_GASP_OVERHEAD))))) | 
|  | return -EINVAL; | 
|  | dev->mtu = new_mtu; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void purge_partial_datagram(struct list_head *old) | 
|  | { | 
|  | struct partial_datagram *pd = list_entry(old, struct partial_datagram, list); | 
|  | struct list_head *lh, *n; | 
|  |  | 
|  | list_for_each_safe(lh, n, &pd->frag_info) { | 
|  | struct fragment_info *fi = list_entry(lh, struct fragment_info, list); | 
|  | list_del(lh); | 
|  | kfree(fi); | 
|  | } | 
|  | list_del(old); | 
|  | kfree_skb(pd->skb); | 
|  | kfree(pd); | 
|  | } | 
|  |  | 
|  | /****************************************** | 
|  | * 1394 bus activity functions | 
|  | ******************************************/ | 
|  |  | 
|  | static struct eth1394_node_ref *eth1394_find_node(struct list_head *inl, | 
|  | struct unit_directory *ud) | 
|  | { | 
|  | struct eth1394_node_ref *node; | 
|  |  | 
|  | list_for_each_entry(node, inl, list) | 
|  | if (node->ud == ud) | 
|  | return node; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static struct eth1394_node_ref *eth1394_find_node_guid(struct list_head *inl, | 
|  | u64 guid) | 
|  | { | 
|  | struct eth1394_node_ref *node; | 
|  |  | 
|  | list_for_each_entry(node, inl, list) | 
|  | if (node->ud->ne->guid == guid) | 
|  | return node; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static struct eth1394_node_ref *eth1394_find_node_nodeid(struct list_head *inl, | 
|  | nodeid_t nodeid) | 
|  | { | 
|  | struct eth1394_node_ref *node; | 
|  | list_for_each_entry(node, inl, list) { | 
|  | if (node->ud->ne->nodeid == nodeid) | 
|  | return node; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int eth1394_probe(struct device *dev) | 
|  | { | 
|  | struct unit_directory *ud; | 
|  | struct eth1394_host_info *hi; | 
|  | struct eth1394_priv *priv; | 
|  | struct eth1394_node_ref *new_node; | 
|  | struct eth1394_node_info *node_info; | 
|  |  | 
|  | ud = container_of(dev, struct unit_directory, device); | 
|  |  | 
|  | hi = hpsb_get_hostinfo(ð1394_highlevel, ud->ne->host); | 
|  | if (!hi) | 
|  | return -ENOENT; | 
|  |  | 
|  | new_node = kmalloc(sizeof(struct eth1394_node_ref), | 
|  | in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); | 
|  | if (!new_node) | 
|  | return -ENOMEM; | 
|  |  | 
|  | node_info = kmalloc(sizeof(struct eth1394_node_info), | 
|  | in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); | 
|  | if (!node_info) { | 
|  | kfree(new_node); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | spin_lock_init(&node_info->pdg.lock); | 
|  | INIT_LIST_HEAD(&node_info->pdg.list); | 
|  | node_info->pdg.sz = 0; | 
|  | node_info->fifo = ETHER1394_INVALID_ADDR; | 
|  |  | 
|  | ud->device.driver_data = node_info; | 
|  | new_node->ud = ud; | 
|  |  | 
|  | priv = netdev_priv(hi->dev); | 
|  | list_add_tail(&new_node->list, &priv->ip_node_list); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int eth1394_remove(struct device *dev) | 
|  | { | 
|  | struct unit_directory *ud; | 
|  | struct eth1394_host_info *hi; | 
|  | struct eth1394_priv *priv; | 
|  | struct eth1394_node_ref *old_node; | 
|  | struct eth1394_node_info *node_info; | 
|  | struct list_head *lh, *n; | 
|  | unsigned long flags; | 
|  |  | 
|  | ud = container_of(dev, struct unit_directory, device); | 
|  | hi = hpsb_get_hostinfo(ð1394_highlevel, ud->ne->host); | 
|  | if (!hi) | 
|  | return -ENOENT; | 
|  |  | 
|  | priv = netdev_priv(hi->dev); | 
|  |  | 
|  | old_node = eth1394_find_node(&priv->ip_node_list, ud); | 
|  |  | 
|  | if (old_node) { | 
|  | list_del(&old_node->list); | 
|  | kfree(old_node); | 
|  |  | 
|  | node_info = (struct eth1394_node_info*)ud->device.driver_data; | 
|  |  | 
|  | spin_lock_irqsave(&node_info->pdg.lock, flags); | 
|  | /* The partial datagram list should be empty, but we'll just | 
|  | * make sure anyway... */ | 
|  | list_for_each_safe(lh, n, &node_info->pdg.list) { | 
|  | purge_partial_datagram(lh); | 
|  | } | 
|  | spin_unlock_irqrestore(&node_info->pdg.lock, flags); | 
|  |  | 
|  | kfree(node_info); | 
|  | ud->device.driver_data = NULL; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int eth1394_update(struct unit_directory *ud) | 
|  | { | 
|  | struct eth1394_host_info *hi; | 
|  | struct eth1394_priv *priv; | 
|  | struct eth1394_node_ref *node; | 
|  | struct eth1394_node_info *node_info; | 
|  |  | 
|  | hi = hpsb_get_hostinfo(ð1394_highlevel, ud->ne->host); | 
|  | if (!hi) | 
|  | return -ENOENT; | 
|  |  | 
|  | priv = netdev_priv(hi->dev); | 
|  |  | 
|  | node = eth1394_find_node(&priv->ip_node_list, ud); | 
|  |  | 
|  | if (!node) { | 
|  | node = kmalloc(sizeof(struct eth1394_node_ref), | 
|  | in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); | 
|  | if (!node) | 
|  | return -ENOMEM; | 
|  |  | 
|  | node_info = kmalloc(sizeof(struct eth1394_node_info), | 
|  | in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); | 
|  | if (!node_info) { | 
|  | kfree(node); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | spin_lock_init(&node_info->pdg.lock); | 
|  | INIT_LIST_HEAD(&node_info->pdg.list); | 
|  | node_info->pdg.sz = 0; | 
|  |  | 
|  | ud->device.driver_data = node_info; | 
|  | node->ud = ud; | 
|  |  | 
|  | priv = netdev_priv(hi->dev); | 
|  | list_add_tail(&node->list, &priv->ip_node_list); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct ieee1394_device_id eth1394_id_table[] = { | 
|  | { | 
|  | .match_flags = (IEEE1394_MATCH_SPECIFIER_ID | | 
|  | IEEE1394_MATCH_VERSION), | 
|  | .specifier_id =	ETHER1394_GASP_SPECIFIER_ID, | 
|  | .version = ETHER1394_GASP_VERSION, | 
|  | }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(ieee1394, eth1394_id_table); | 
|  |  | 
|  | static struct hpsb_protocol_driver eth1394_proto_driver = { | 
|  | .name		= "IPv4 over 1394 Driver", | 
|  | .id_table	= eth1394_id_table, | 
|  | .update		= eth1394_update, | 
|  | .driver		= { | 
|  | .name		= ETH1394_DRIVER_NAME, | 
|  | .bus		= &ieee1394_bus_type, | 
|  | .probe		= eth1394_probe, | 
|  | .remove		= eth1394_remove, | 
|  | }, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static void ether1394_reset_priv (struct net_device *dev, int set_mtu) | 
|  | { | 
|  | unsigned long flags; | 
|  | int i; | 
|  | struct eth1394_priv *priv = netdev_priv(dev); | 
|  | struct hpsb_host *host = priv->host; | 
|  | u64 guid = *((u64*)&(host->csr.rom->bus_info_data[3])); | 
|  | u16 maxpayload = 1 << (host->csr.max_rec + 1); | 
|  | int max_speed = IEEE1394_SPEED_MAX; | 
|  |  | 
|  | spin_lock_irqsave (&priv->lock, flags); | 
|  |  | 
|  | memset(priv->ud_list, 0, sizeof(struct node_entry*) * ALL_NODES); | 
|  | priv->bc_maxpayload = 512; | 
|  |  | 
|  | /* Determine speed limit */ | 
|  | for (i = 0; i < host->node_count; i++) | 
|  | if (max_speed > host->speed_map[NODEID_TO_NODE(host->node_id) * | 
|  | 64 + i]) | 
|  | max_speed = host->speed_map[NODEID_TO_NODE(host->node_id) * | 
|  | 64 + i]; | 
|  | priv->bc_sspd = max_speed; | 
|  |  | 
|  | /* We'll use our maxpayload as the default mtu */ | 
|  | if (set_mtu) { | 
|  | dev->mtu = min(ETH1394_DATA_LEN, | 
|  | (int)(maxpayload - | 
|  | (sizeof(union eth1394_hdr) + | 
|  | ETHER1394_GASP_OVERHEAD))); | 
|  |  | 
|  | /* Set our hardware address while we're at it */ | 
|  | *(u64*)dev->dev_addr = guid; | 
|  | *(u64*)dev->broadcast = ~0x0ULL; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore (&priv->lock, flags); | 
|  | } | 
|  |  | 
|  | /* This function is called right before register_netdev */ | 
|  | static void ether1394_init_dev (struct net_device *dev) | 
|  | { | 
|  | /* Our functions */ | 
|  | dev->open		= ether1394_open; | 
|  | dev->stop		= ether1394_stop; | 
|  | dev->hard_start_xmit	= ether1394_tx; | 
|  | dev->get_stats		= ether1394_stats; | 
|  | dev->tx_timeout		= ether1394_tx_timeout; | 
|  | dev->change_mtu		= ether1394_change_mtu; | 
|  |  | 
|  | dev->hard_header	= ether1394_header; | 
|  | dev->rebuild_header	= ether1394_rebuild_header; | 
|  | dev->hard_header_cache	= ether1394_header_cache; | 
|  | dev->header_cache_update= ether1394_header_cache_update; | 
|  | dev->hard_header_parse	= ether1394_header_parse; | 
|  | dev->set_mac_address	= ether1394_mac_addr; | 
|  | SET_ETHTOOL_OPS(dev, ðtool_ops); | 
|  |  | 
|  | /* Some constants */ | 
|  | dev->watchdog_timeo	= ETHER1394_TIMEOUT; | 
|  | dev->flags		= IFF_BROADCAST | IFF_MULTICAST; | 
|  | dev->features		= NETIF_F_HIGHDMA; | 
|  | dev->addr_len		= ETH1394_ALEN; | 
|  | dev->hard_header_len 	= ETH1394_HLEN; | 
|  | dev->type		= ARPHRD_IEEE1394; | 
|  |  | 
|  | ether1394_reset_priv (dev, 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function is called every time a card is found. It is generally called | 
|  | * when the module is installed. This is where we add all of our ethernet | 
|  | * devices. One for each host. | 
|  | */ | 
|  | static void ether1394_add_host (struct hpsb_host *host) | 
|  | { | 
|  | struct eth1394_host_info *hi = NULL; | 
|  | struct net_device *dev = NULL; | 
|  | struct eth1394_priv *priv; | 
|  | static int version_printed = 0; | 
|  | u64 fifo_addr; | 
|  |  | 
|  | if (!(host->config_roms & HPSB_CONFIG_ROM_ENTRY_IP1394)) | 
|  | return; | 
|  |  | 
|  | fifo_addr = hpsb_allocate_and_register_addrspace(ð1394_highlevel, | 
|  | host, | 
|  | &addr_ops, | 
|  | ETHER1394_REGION_ADDR_LEN, | 
|  | ETHER1394_REGION_ADDR_LEN, | 
|  | -1, -1); | 
|  | if (fifo_addr == ~0ULL) | 
|  | goto out; | 
|  |  | 
|  | if (version_printed++ == 0) | 
|  | ETH1394_PRINT_G (KERN_INFO, "%s\n", version); | 
|  |  | 
|  | /* We should really have our own alloc_hpsbdev() function in | 
|  | * net_init.c instead of calling the one for ethernet then hijacking | 
|  | * it for ourselves.  That way we'd be a real networking device. */ | 
|  | dev = alloc_etherdev(sizeof (struct eth1394_priv)); | 
|  |  | 
|  | if (dev == NULL) { | 
|  | ETH1394_PRINT_G (KERN_ERR, "Out of memory trying to allocate " | 
|  | "etherdevice for IEEE 1394 device %s-%d\n", | 
|  | host->driver->name, host->id); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | SET_MODULE_OWNER(dev); | 
|  | SET_NETDEV_DEV(dev, &host->device); | 
|  |  | 
|  | priv = netdev_priv(dev); | 
|  |  | 
|  | INIT_LIST_HEAD(&priv->ip_node_list); | 
|  |  | 
|  | spin_lock_init(&priv->lock); | 
|  | priv->host = host; | 
|  | priv->local_fifo = fifo_addr; | 
|  |  | 
|  | hi = hpsb_create_hostinfo(ð1394_highlevel, host, sizeof(*hi)); | 
|  |  | 
|  | if (hi == NULL) { | 
|  | ETH1394_PRINT_G (KERN_ERR, "Out of memory trying to create " | 
|  | "hostinfo for IEEE 1394 device %s-%d\n", | 
|  | host->driver->name, host->id); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ether1394_init_dev(dev); | 
|  |  | 
|  | if (register_netdev (dev)) { | 
|  | ETH1394_PRINT (KERN_ERR, dev->name, "Error registering network driver\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ETH1394_PRINT (KERN_INFO, dev->name, "IEEE-1394 IPv4 over 1394 Ethernet (fw-host%d)\n", | 
|  | host->id); | 
|  |  | 
|  | hi->host = host; | 
|  | hi->dev = dev; | 
|  |  | 
|  | /* Ignore validity in hopes that it will be set in the future.  It'll | 
|  | * be checked when the eth device is opened. */ | 
|  | priv->broadcast_channel = host->csr.broadcast_channel & 0x3f; | 
|  |  | 
|  | priv->iso = hpsb_iso_recv_init(host, | 
|  | ETHER1394_ISO_BUF_SIZE, | 
|  | ETHER1394_GASP_BUFFERS, | 
|  | priv->broadcast_channel, | 
|  | HPSB_ISO_DMA_PACKET_PER_BUFFER, | 
|  | 1, ether1394_iso); | 
|  | if (priv->iso == NULL) { | 
|  | ETH1394_PRINT(KERN_ERR, dev->name, | 
|  | "Could not allocate isochronous receive context " | 
|  | "for the broadcast channel\n"); | 
|  | priv->bc_state = ETHER1394_BC_ERROR; | 
|  | } else { | 
|  | if (hpsb_iso_recv_start(priv->iso, -1, (1 << 3), -1) < 0) | 
|  | priv->bc_state = ETHER1394_BC_STOPPED; | 
|  | else | 
|  | priv->bc_state = ETHER1394_BC_RUNNING; | 
|  | } | 
|  |  | 
|  | return; | 
|  |  | 
|  | out: | 
|  | if (dev != NULL) | 
|  | free_netdev(dev); | 
|  | if (hi) | 
|  | hpsb_destroy_hostinfo(ð1394_highlevel, host); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Remove a card from our list */ | 
|  | static void ether1394_remove_host (struct hpsb_host *host) | 
|  | { | 
|  | struct eth1394_host_info *hi; | 
|  |  | 
|  | hi = hpsb_get_hostinfo(ð1394_highlevel, host); | 
|  | if (hi != NULL) { | 
|  | struct eth1394_priv *priv = netdev_priv(hi->dev); | 
|  |  | 
|  | hpsb_unregister_addrspace(ð1394_highlevel, host, | 
|  | priv->local_fifo); | 
|  |  | 
|  | if (priv->iso != NULL) | 
|  | hpsb_iso_shutdown(priv->iso); | 
|  |  | 
|  | if (hi->dev) { | 
|  | unregister_netdev (hi->dev); | 
|  | free_netdev(hi->dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* A reset has just arisen */ | 
|  | static void ether1394_host_reset (struct hpsb_host *host) | 
|  | { | 
|  | struct eth1394_host_info *hi; | 
|  | struct eth1394_priv *priv; | 
|  | struct net_device *dev; | 
|  | struct list_head *lh, *n; | 
|  | struct eth1394_node_ref *node; | 
|  | struct eth1394_node_info *node_info; | 
|  | unsigned long flags; | 
|  |  | 
|  | hi = hpsb_get_hostinfo(ð1394_highlevel, host); | 
|  |  | 
|  | /* This can happen for hosts that we don't use */ | 
|  | if (hi == NULL) | 
|  | return; | 
|  |  | 
|  | dev = hi->dev; | 
|  | priv = (struct eth1394_priv *)netdev_priv(dev); | 
|  |  | 
|  | /* Reset our private host data, but not our mtu */ | 
|  | netif_stop_queue (dev); | 
|  | ether1394_reset_priv (dev, 0); | 
|  |  | 
|  | list_for_each_entry(node, &priv->ip_node_list, list) { | 
|  | node_info = (struct eth1394_node_info*)node->ud->device.driver_data; | 
|  |  | 
|  | spin_lock_irqsave(&node_info->pdg.lock, flags); | 
|  |  | 
|  | list_for_each_safe(lh, n, &node_info->pdg.list) { | 
|  | purge_partial_datagram(lh); | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&(node_info->pdg.list)); | 
|  | node_info->pdg.sz = 0; | 
|  |  | 
|  | spin_unlock_irqrestore(&node_info->pdg.lock, flags); | 
|  | } | 
|  |  | 
|  | netif_wake_queue (dev); | 
|  | } | 
|  |  | 
|  | /****************************************** | 
|  | * HW Header net device functions | 
|  | ******************************************/ | 
|  | /* These functions have been adapted from net/ethernet/eth.c */ | 
|  |  | 
|  |  | 
|  | /* Create a fake MAC header for an arbitrary protocol layer. | 
|  | * saddr=NULL means use device source address | 
|  | * daddr=NULL means leave destination address (eg unresolved arp). */ | 
|  | static int ether1394_header(struct sk_buff *skb, struct net_device *dev, | 
|  | unsigned short type, void *daddr, void *saddr, | 
|  | unsigned len) | 
|  | { | 
|  | struct eth1394hdr *eth = (struct eth1394hdr *)skb_push(skb, ETH1394_HLEN); | 
|  |  | 
|  | eth->h_proto = htons(type); | 
|  |  | 
|  | if (dev->flags & (IFF_LOOPBACK|IFF_NOARP)) { | 
|  | memset(eth->h_dest, 0, dev->addr_len); | 
|  | return(dev->hard_header_len); | 
|  | } | 
|  |  | 
|  | if (daddr) { | 
|  | memcpy(eth->h_dest,daddr,dev->addr_len); | 
|  | return dev->hard_header_len; | 
|  | } | 
|  |  | 
|  | return -dev->hard_header_len; | 
|  |  | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Rebuild the faked MAC header. This is called after an ARP | 
|  | * (or in future other address resolution) has completed on this | 
|  | * sk_buff. We now let ARP fill in the other fields. | 
|  | * | 
|  | * This routine CANNOT use cached dst->neigh! | 
|  | * Really, it is used only when dst->neigh is wrong. | 
|  | */ | 
|  | static int ether1394_rebuild_header(struct sk_buff *skb) | 
|  | { | 
|  | struct eth1394hdr *eth = (struct eth1394hdr *)skb->data; | 
|  | struct net_device *dev = skb->dev; | 
|  |  | 
|  | switch (eth->h_proto) { | 
|  |  | 
|  | #ifdef CONFIG_INET | 
|  | case __constant_htons(ETH_P_IP): | 
|  | return arp_find((unsigned char*)ð->h_dest, skb); | 
|  | #endif | 
|  | default: | 
|  | ETH1394_PRINT(KERN_DEBUG, dev->name, | 
|  | "unable to resolve type %04x addresses.\n", | 
|  | eth->h_proto); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ether1394_header_parse(struct sk_buff *skb, unsigned char *haddr) | 
|  | { | 
|  | struct net_device *dev = skb->dev; | 
|  | memcpy(haddr, dev->dev_addr, ETH1394_ALEN); | 
|  | return ETH1394_ALEN; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int ether1394_header_cache(struct neighbour *neigh, struct hh_cache *hh) | 
|  | { | 
|  | unsigned short type = hh->hh_type; | 
|  | struct eth1394hdr *eth = (struct eth1394hdr*)(((u8*)hh->hh_data) + | 
|  | (16 - ETH1394_HLEN)); | 
|  | struct net_device *dev = neigh->dev; | 
|  |  | 
|  | if (type == __constant_htons(ETH_P_802_3)) { | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | eth->h_proto = type; | 
|  | memcpy(eth->h_dest, neigh->ha, dev->addr_len); | 
|  |  | 
|  | hh->hh_len = ETH1394_HLEN; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Called by Address Resolution module to notify changes in address. */ | 
|  | static void ether1394_header_cache_update(struct hh_cache *hh, | 
|  | struct net_device *dev, | 
|  | unsigned char * haddr) | 
|  | { | 
|  | memcpy(((u8*)hh->hh_data) + (16 - ETH1394_HLEN), haddr, dev->addr_len); | 
|  | } | 
|  |  | 
|  | static int ether1394_mac_addr(struct net_device *dev, void *p) | 
|  | { | 
|  | if (netif_running(dev)) | 
|  | return -EBUSY; | 
|  |  | 
|  | /* Not going to allow setting the MAC address, we really need to use | 
|  | * the real one supplied by the hardware */ | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /****************************************** | 
|  | * Datagram reception code | 
|  | ******************************************/ | 
|  |  | 
|  | /* Copied from net/ethernet/eth.c */ | 
|  | static inline u16 ether1394_type_trans(struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct eth1394hdr *eth; | 
|  | unsigned char *rawp; | 
|  |  | 
|  | skb->mac.raw = skb->data; | 
|  | skb_pull (skb, ETH1394_HLEN); | 
|  | eth = eth1394_hdr(skb); | 
|  |  | 
|  | if (*eth->h_dest & 1) { | 
|  | if (memcmp(eth->h_dest, dev->broadcast, dev->addr_len)==0) | 
|  | skb->pkt_type = PACKET_BROADCAST; | 
|  | #if 0 | 
|  | else | 
|  | skb->pkt_type = PACKET_MULTICAST; | 
|  | #endif | 
|  | } else { | 
|  | if (memcmp(eth->h_dest, dev->dev_addr, dev->addr_len)) | 
|  | skb->pkt_type = PACKET_OTHERHOST; | 
|  | } | 
|  |  | 
|  | if (ntohs (eth->h_proto) >= 1536) | 
|  | return eth->h_proto; | 
|  |  | 
|  | rawp = skb->data; | 
|  |  | 
|  | if (*(unsigned short *)rawp == 0xFFFF) | 
|  | return htons (ETH_P_802_3); | 
|  |  | 
|  | return htons (ETH_P_802_2); | 
|  | } | 
|  |  | 
|  | /* Parse an encapsulated IP1394 header into an ethernet frame packet. | 
|  | * We also perform ARP translation here, if need be.  */ | 
|  | static inline u16 ether1394_parse_encap(struct sk_buff *skb, | 
|  | struct net_device *dev, | 
|  | nodeid_t srcid, nodeid_t destid, | 
|  | u16 ether_type) | 
|  | { | 
|  | struct eth1394_priv *priv = netdev_priv(dev); | 
|  | u64 dest_hw; | 
|  | unsigned short ret = 0; | 
|  |  | 
|  | /* Setup our hw addresses. We use these to build the | 
|  | * ethernet header.  */ | 
|  | if (destid == (LOCAL_BUS | ALL_NODES)) | 
|  | dest_hw = ~0ULL;  /* broadcast */ | 
|  | else | 
|  | dest_hw = cpu_to_be64((((u64)priv->host->csr.guid_hi) << 32) | | 
|  | priv->host->csr.guid_lo); | 
|  |  | 
|  | /* If this is an ARP packet, convert it. First, we want to make | 
|  | * use of some of the fields, since they tell us a little bit | 
|  | * about the sending machine.  */ | 
|  | if (ether_type == __constant_htons (ETH_P_ARP)) { | 
|  | struct eth1394_arp *arp1394 = (struct eth1394_arp*)skb->data; | 
|  | struct arphdr *arp = (struct arphdr *)skb->data; | 
|  | unsigned char *arp_ptr = (unsigned char *)(arp + 1); | 
|  | u64 fifo_addr = (u64)ntohs(arp1394->fifo_hi) << 32 | | 
|  | ntohl(arp1394->fifo_lo); | 
|  | u8 max_rec = min(priv->host->csr.max_rec, | 
|  | (u8)(arp1394->max_rec)); | 
|  | int sspd = arp1394->sspd; | 
|  | u16 maxpayload; | 
|  | struct eth1394_node_ref *node; | 
|  | struct eth1394_node_info *node_info; | 
|  |  | 
|  | /* Sanity check. MacOSX seems to be sending us 131 in this | 
|  | * field (atleast on my Panther G5). Not sure why. */ | 
|  | if (sspd > 5 || sspd < 0) | 
|  | sspd = 0; | 
|  |  | 
|  | maxpayload = min(eth1394_speedto_maxpayload[sspd], (u16)(1 << (max_rec + 1))); | 
|  |  | 
|  | node = eth1394_find_node_guid(&priv->ip_node_list, | 
|  | be64_to_cpu(arp1394->s_uniq_id)); | 
|  | if (!node) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | node_info = (struct eth1394_node_info*)node->ud->device.driver_data; | 
|  |  | 
|  | /* Update our speed/payload/fifo_offset table */ | 
|  | node_info->maxpayload =	maxpayload; | 
|  | node_info->sspd =	sspd; | 
|  | node_info->fifo =	fifo_addr; | 
|  |  | 
|  | /* Now that we're done with the 1394 specific stuff, we'll | 
|  | * need to alter some of the data.  Believe it or not, all | 
|  | * that needs to be done is sender_IP_address needs to be | 
|  | * moved, the destination hardware address get stuffed | 
|  | * in and the hardware address length set to 8. | 
|  | * | 
|  | * IMPORTANT: The code below overwrites 1394 specific data | 
|  | * needed above so keep the munging of the data for the | 
|  | * higher level IP stack last. */ | 
|  |  | 
|  | arp->ar_hln = 8; | 
|  | arp_ptr += arp->ar_hln;		/* skip over sender unique id */ | 
|  | *(u32*)arp_ptr = arp1394->sip;	/* move sender IP addr */ | 
|  | arp_ptr += arp->ar_pln;		/* skip over sender IP addr */ | 
|  |  | 
|  | if (arp->ar_op == 1) | 
|  | /* just set ARP req target unique ID to 0 */ | 
|  | *((u64*)arp_ptr) = 0; | 
|  | else | 
|  | *((u64*)arp_ptr) = *((u64*)dev->dev_addr); | 
|  | } | 
|  |  | 
|  | /* Now add the ethernet header. */ | 
|  | if (dev->hard_header (skb, dev, __constant_ntohs (ether_type), | 
|  | &dest_hw, NULL, skb->len) >= 0) | 
|  | ret = ether1394_type_trans(skb, dev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline int fragment_overlap(struct list_head *frag_list, int offset, int len) | 
|  | { | 
|  | struct fragment_info *fi; | 
|  |  | 
|  | list_for_each_entry(fi, frag_list, list) { | 
|  | if ( ! ((offset > (fi->offset + fi->len - 1)) || | 
|  | ((offset + len - 1) < fi->offset))) | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline struct list_head *find_partial_datagram(struct list_head *pdgl, int dgl) | 
|  | { | 
|  | struct partial_datagram *pd; | 
|  |  | 
|  | list_for_each_entry(pd, pdgl, list) { | 
|  | if (pd->dgl == dgl) | 
|  | return &pd->list; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Assumes that new fragment does not overlap any existing fragments */ | 
|  | static inline int new_fragment(struct list_head *frag_info, int offset, int len) | 
|  | { | 
|  | struct list_head *lh; | 
|  | struct fragment_info *fi, *fi2, *new; | 
|  |  | 
|  | list_for_each(lh, frag_info) { | 
|  | fi = list_entry(lh, struct fragment_info, list); | 
|  | if ((fi->offset + fi->len) == offset) { | 
|  | /* The new fragment can be tacked on to the end */ | 
|  | fi->len += len; | 
|  | /* Did the new fragment plug a hole? */ | 
|  | fi2 = list_entry(lh->next, struct fragment_info, list); | 
|  | if ((fi->offset + fi->len) == fi2->offset) { | 
|  | /* glue fragments together */ | 
|  | fi->len += fi2->len; | 
|  | list_del(lh->next); | 
|  | kfree(fi2); | 
|  | } | 
|  | return 0; | 
|  | } else if ((offset + len) == fi->offset) { | 
|  | /* The new fragment can be tacked on to the beginning */ | 
|  | fi->offset = offset; | 
|  | fi->len += len; | 
|  | /* Did the new fragment plug a hole? */ | 
|  | fi2 = list_entry(lh->prev, struct fragment_info, list); | 
|  | if ((fi2->offset + fi2->len) == fi->offset) { | 
|  | /* glue fragments together */ | 
|  | fi2->len += fi->len; | 
|  | list_del(lh); | 
|  | kfree(fi); | 
|  | } | 
|  | return 0; | 
|  | } else if (offset > (fi->offset + fi->len)) { | 
|  | break; | 
|  | } else if ((offset + len) < fi->offset) { | 
|  | lh = lh->prev; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | new = kmalloc(sizeof(struct fragment_info), GFP_ATOMIC); | 
|  | if (!new) | 
|  | return -ENOMEM; | 
|  |  | 
|  | new->offset = offset; | 
|  | new->len = len; | 
|  |  | 
|  | list_add(&new->list, lh); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int new_partial_datagram(struct net_device *dev, | 
|  | struct list_head *pdgl, int dgl, | 
|  | int dg_size, char *frag_buf, | 
|  | int frag_off, int frag_len) | 
|  | { | 
|  | struct partial_datagram *new; | 
|  |  | 
|  | new = kmalloc(sizeof(struct partial_datagram), GFP_ATOMIC); | 
|  | if (!new) | 
|  | return -ENOMEM; | 
|  |  | 
|  | INIT_LIST_HEAD(&new->frag_info); | 
|  |  | 
|  | if (new_fragment(&new->frag_info, frag_off, frag_len) < 0) { | 
|  | kfree(new); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | new->dgl = dgl; | 
|  | new->dg_size = dg_size; | 
|  |  | 
|  | new->skb = dev_alloc_skb(dg_size + dev->hard_header_len + 15); | 
|  | if (!new->skb) { | 
|  | struct fragment_info *fi = list_entry(new->frag_info.next, | 
|  | struct fragment_info, | 
|  | list); | 
|  | kfree(fi); | 
|  | kfree(new); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | skb_reserve(new->skb, (dev->hard_header_len + 15) & ~15); | 
|  | new->pbuf = skb_put(new->skb, dg_size); | 
|  | memcpy(new->pbuf + frag_off, frag_buf, frag_len); | 
|  |  | 
|  | list_add(&new->list, pdgl); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int update_partial_datagram(struct list_head *pdgl, struct list_head *lh, | 
|  | char *frag_buf, int frag_off, int frag_len) | 
|  | { | 
|  | struct partial_datagram *pd = list_entry(lh, struct partial_datagram, list); | 
|  |  | 
|  | if (new_fragment(&pd->frag_info, frag_off, frag_len) < 0) { | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | memcpy(pd->pbuf + frag_off, frag_buf, frag_len); | 
|  |  | 
|  | /* Move list entry to beginnig of list so that oldest partial | 
|  | * datagrams percolate to the end of the list */ | 
|  | list_del(lh); | 
|  | list_add(lh, pdgl); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int is_datagram_complete(struct list_head *lh, int dg_size) | 
|  | { | 
|  | struct partial_datagram *pd = list_entry(lh, struct partial_datagram, list); | 
|  | struct fragment_info *fi = list_entry(pd->frag_info.next, | 
|  | struct fragment_info, list); | 
|  |  | 
|  | return (fi->len == dg_size); | 
|  | } | 
|  |  | 
|  | /* Packet reception. We convert the IP1394 encapsulation header to an | 
|  | * ethernet header, and fill it with some of our other fields. This is | 
|  | * an incoming packet from the 1394 bus.  */ | 
|  | static int ether1394_data_handler(struct net_device *dev, int srcid, int destid, | 
|  | char *buf, int len) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | unsigned long flags; | 
|  | struct eth1394_priv *priv = netdev_priv(dev); | 
|  | union eth1394_hdr *hdr = (union eth1394_hdr *)buf; | 
|  | u16 ether_type = 0;  /* initialized to clear warning */ | 
|  | int hdr_len; | 
|  | struct unit_directory *ud = priv->ud_list[NODEID_TO_NODE(srcid)]; | 
|  | struct eth1394_node_info *node_info; | 
|  |  | 
|  | if (!ud) { | 
|  | struct eth1394_node_ref *node; | 
|  | node = eth1394_find_node_nodeid(&priv->ip_node_list, srcid); | 
|  | if (!node) { | 
|  | HPSB_PRINT(KERN_ERR, "ether1394 rx: sender nodeid " | 
|  | "lookup failure: " NODE_BUS_FMT, | 
|  | NODE_BUS_ARGS(priv->host, srcid)); | 
|  | priv->stats.rx_dropped++; | 
|  | return -1; | 
|  | } | 
|  | ud = node->ud; | 
|  |  | 
|  | priv->ud_list[NODEID_TO_NODE(srcid)] = ud; | 
|  | } | 
|  |  | 
|  | node_info = (struct eth1394_node_info*)ud->device.driver_data; | 
|  |  | 
|  | /* First, did we receive a fragmented or unfragmented datagram? */ | 
|  | hdr->words.word1 = ntohs(hdr->words.word1); | 
|  |  | 
|  | hdr_len = hdr_type_len[hdr->common.lf]; | 
|  |  | 
|  | if (hdr->common.lf == ETH1394_HDR_LF_UF) { | 
|  | /* An unfragmented datagram has been received by the ieee1394 | 
|  | * bus. Build an skbuff around it so we can pass it to the | 
|  | * high level network layer. */ | 
|  |  | 
|  | skb = dev_alloc_skb(len + dev->hard_header_len + 15); | 
|  | if (!skb) { | 
|  | HPSB_PRINT (KERN_ERR, "ether1394 rx: low on mem\n"); | 
|  | priv->stats.rx_dropped++; | 
|  | return -1; | 
|  | } | 
|  | skb_reserve(skb, (dev->hard_header_len + 15) & ~15); | 
|  | memcpy(skb_put(skb, len - hdr_len), buf + hdr_len, len - hdr_len); | 
|  | ether_type = hdr->uf.ether_type; | 
|  | } else { | 
|  | /* A datagram fragment has been received, now the fun begins. */ | 
|  |  | 
|  | struct list_head *pdgl, *lh; | 
|  | struct partial_datagram *pd; | 
|  | int fg_off; | 
|  | int fg_len = len - hdr_len; | 
|  | int dg_size; | 
|  | int dgl; | 
|  | int retval; | 
|  | struct pdg_list *pdg = &(node_info->pdg); | 
|  |  | 
|  | hdr->words.word3 = ntohs(hdr->words.word3); | 
|  | /* The 4th header word is reserved so no need to do ntohs() */ | 
|  |  | 
|  | if (hdr->common.lf == ETH1394_HDR_LF_FF) { | 
|  | ether_type = hdr->ff.ether_type; | 
|  | dgl = hdr->ff.dgl; | 
|  | dg_size = hdr->ff.dg_size + 1; | 
|  | fg_off = 0; | 
|  | } else { | 
|  | hdr->words.word2 = ntohs(hdr->words.word2); | 
|  | dgl = hdr->sf.dgl; | 
|  | dg_size = hdr->sf.dg_size + 1; | 
|  | fg_off = hdr->sf.fg_off; | 
|  | } | 
|  | spin_lock_irqsave(&pdg->lock, flags); | 
|  |  | 
|  | pdgl = &(pdg->list); | 
|  | lh = find_partial_datagram(pdgl, dgl); | 
|  |  | 
|  | if (lh == NULL) { | 
|  | while (pdg->sz >= max_partial_datagrams) { | 
|  | /* remove the oldest */ | 
|  | purge_partial_datagram(pdgl->prev); | 
|  | pdg->sz--; | 
|  | } | 
|  |  | 
|  | retval = new_partial_datagram(dev, pdgl, dgl, dg_size, | 
|  | buf + hdr_len, fg_off, | 
|  | fg_len); | 
|  | if (retval < 0) { | 
|  | spin_unlock_irqrestore(&pdg->lock, flags); | 
|  | goto bad_proto; | 
|  | } | 
|  | pdg->sz++; | 
|  | lh = find_partial_datagram(pdgl, dgl); | 
|  | } else { | 
|  | struct partial_datagram *pd; | 
|  |  | 
|  | pd = list_entry(lh, struct partial_datagram, list); | 
|  |  | 
|  | if (fragment_overlap(&pd->frag_info, fg_off, fg_len)) { | 
|  | /* Overlapping fragments, obliterate old | 
|  | * datagram and start new one. */ | 
|  | purge_partial_datagram(lh); | 
|  | retval = new_partial_datagram(dev, pdgl, dgl, | 
|  | dg_size, | 
|  | buf + hdr_len, | 
|  | fg_off, fg_len); | 
|  | if (retval < 0) { | 
|  | pdg->sz--; | 
|  | spin_unlock_irqrestore(&pdg->lock, flags); | 
|  | goto bad_proto; | 
|  | } | 
|  | } else { | 
|  | retval = update_partial_datagram(pdgl, lh, | 
|  | buf + hdr_len, | 
|  | fg_off, fg_len); | 
|  | if (retval < 0) { | 
|  | /* Couldn't save off fragment anyway | 
|  | * so might as well obliterate the | 
|  | * datagram now. */ | 
|  | purge_partial_datagram(lh); | 
|  | pdg->sz--; | 
|  | spin_unlock_irqrestore(&pdg->lock, flags); | 
|  | goto bad_proto; | 
|  | } | 
|  | } /* fragment overlap */ | 
|  | } /* new datagram or add to existing one */ | 
|  |  | 
|  | pd = list_entry(lh, struct partial_datagram, list); | 
|  |  | 
|  | if (hdr->common.lf == ETH1394_HDR_LF_FF) { | 
|  | pd->ether_type = ether_type; | 
|  | } | 
|  |  | 
|  | if (is_datagram_complete(lh, dg_size)) { | 
|  | ether_type = pd->ether_type; | 
|  | pdg->sz--; | 
|  | skb = skb_get(pd->skb); | 
|  | purge_partial_datagram(lh); | 
|  | spin_unlock_irqrestore(&pdg->lock, flags); | 
|  | } else { | 
|  | /* Datagram is not complete, we're done for the | 
|  | * moment. */ | 
|  | spin_unlock_irqrestore(&pdg->lock, flags); | 
|  | return 0; | 
|  | } | 
|  | } /* unframgented datagram or fragmented one */ | 
|  |  | 
|  | /* Write metadata, and then pass to the receive level */ | 
|  | skb->dev = dev; | 
|  | skb->ip_summed = CHECKSUM_UNNECESSARY;	/* don't check it */ | 
|  |  | 
|  | /* Parse the encapsulation header. This actually does the job of | 
|  | * converting to an ethernet frame header, aswell as arp | 
|  | * conversion if needed. ARP conversion is easier in this | 
|  | * direction, since we are using ethernet as our backend.  */ | 
|  | skb->protocol = ether1394_parse_encap(skb, dev, srcid, destid, | 
|  | ether_type); | 
|  |  | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | if (!skb->protocol) { | 
|  | priv->stats.rx_errors++; | 
|  | priv->stats.rx_dropped++; | 
|  | dev_kfree_skb_any(skb); | 
|  | goto bad_proto; | 
|  | } | 
|  |  | 
|  | if (netif_rx(skb) == NET_RX_DROP) { | 
|  | priv->stats.rx_errors++; | 
|  | priv->stats.rx_dropped++; | 
|  | goto bad_proto; | 
|  | } | 
|  |  | 
|  | /* Statistics */ | 
|  | priv->stats.rx_packets++; | 
|  | priv->stats.rx_bytes += skb->len; | 
|  |  | 
|  | bad_proto: | 
|  | if (netif_queue_stopped(dev)) | 
|  | netif_wake_queue(dev); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | dev->last_rx = jiffies; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ether1394_write(struct hpsb_host *host, int srcid, int destid, | 
|  | quadlet_t *data, u64 addr, size_t len, u16 flags) | 
|  | { | 
|  | struct eth1394_host_info *hi; | 
|  |  | 
|  | hi = hpsb_get_hostinfo(ð1394_highlevel, host); | 
|  | if (hi == NULL) { | 
|  | ETH1394_PRINT_G(KERN_ERR, "Could not find net device for host %s\n", | 
|  | host->driver->name); | 
|  | return RCODE_ADDRESS_ERROR; | 
|  | } | 
|  |  | 
|  | if (ether1394_data_handler(hi->dev, srcid, destid, (char*)data, len)) | 
|  | return RCODE_ADDRESS_ERROR; | 
|  | else | 
|  | return RCODE_COMPLETE; | 
|  | } | 
|  |  | 
|  | static void ether1394_iso(struct hpsb_iso *iso) | 
|  | { | 
|  | quadlet_t *data; | 
|  | char *buf; | 
|  | struct eth1394_host_info *hi; | 
|  | struct net_device *dev; | 
|  | struct eth1394_priv *priv; | 
|  | unsigned int len; | 
|  | u32 specifier_id; | 
|  | u16 source_id; | 
|  | int i; | 
|  | int nready; | 
|  |  | 
|  | hi = hpsb_get_hostinfo(ð1394_highlevel, iso->host); | 
|  | if (hi == NULL) { | 
|  | ETH1394_PRINT_G(KERN_ERR, "Could not find net device for host %s\n", | 
|  | iso->host->driver->name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | dev = hi->dev; | 
|  |  | 
|  | nready = hpsb_iso_n_ready(iso); | 
|  | for (i = 0; i < nready; i++) { | 
|  | struct hpsb_iso_packet_info *info = | 
|  | &iso->infos[(iso->first_packet + i) % iso->buf_packets]; | 
|  | data = (quadlet_t*) (iso->data_buf.kvirt + info->offset); | 
|  |  | 
|  | /* skip over GASP header */ | 
|  | buf = (char *)data + 8; | 
|  | len = info->len - 8; | 
|  |  | 
|  | specifier_id = (((be32_to_cpu(data[0]) & 0xffff) << 8) | | 
|  | ((be32_to_cpu(data[1]) & 0xff000000) >> 24)); | 
|  | source_id = be32_to_cpu(data[0]) >> 16; | 
|  |  | 
|  | priv = netdev_priv(dev); | 
|  |  | 
|  | if (info->channel != (iso->host->csr.broadcast_channel & 0x3f) || | 
|  | specifier_id != ETHER1394_GASP_SPECIFIER_ID) { | 
|  | /* This packet is not for us */ | 
|  | continue; | 
|  | } | 
|  | ether1394_data_handler(dev, source_id, LOCAL_BUS | ALL_NODES, | 
|  | buf, len); | 
|  | } | 
|  |  | 
|  | hpsb_iso_recv_release_packets(iso, i); | 
|  |  | 
|  | dev->last_rx = jiffies; | 
|  | } | 
|  |  | 
|  | /****************************************** | 
|  | * Datagram transmission code | 
|  | ******************************************/ | 
|  |  | 
|  | /* Convert a standard ARP packet to 1394 ARP. The first 8 bytes (the entire | 
|  | * arphdr) is the same format as the ip1394 header, so they overlap.  The rest | 
|  | * needs to be munged a bit.  The remainder of the arphdr is formatted based | 
|  | * on hwaddr len and ipaddr len.  We know what they'll be, so it's easy to | 
|  | * judge. | 
|  | * | 
|  | * Now that the EUI is used for the hardware address all we need to do to make | 
|  | * this work for 1394 is to insert 2 quadlets that contain max_rec size, | 
|  | * speed, and unicast FIFO address information between the sender_unique_id | 
|  | * and the IP addresses. | 
|  | */ | 
|  | static inline void ether1394_arp_to_1394arp(struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct eth1394_priv *priv = netdev_priv(dev); | 
|  |  | 
|  | struct arphdr *arp = (struct arphdr *)skb->data; | 
|  | unsigned char *arp_ptr = (unsigned char *)(arp + 1); | 
|  | struct eth1394_arp *arp1394 = (struct eth1394_arp *)skb->data; | 
|  |  | 
|  | /* Believe it or not, all that need to happen is sender IP get moved | 
|  | * and set hw_addr_len, max_rec, sspd, fifo_hi and fifo_lo.  */ | 
|  | arp1394->hw_addr_len	= 16; | 
|  | arp1394->sip		= *(u32*)(arp_ptr + ETH1394_ALEN); | 
|  | arp1394->max_rec	= priv->host->csr.max_rec; | 
|  | arp1394->sspd		= priv->host->csr.lnk_spd; | 
|  | arp1394->fifo_hi	= htons (priv->local_fifo >> 32); | 
|  | arp1394->fifo_lo	= htonl (priv->local_fifo & ~0x0); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* We need to encapsulate the standard header with our own. We use the | 
|  | * ethernet header's proto for our own. */ | 
|  | static inline unsigned int ether1394_encapsulate_prep(unsigned int max_payload, | 
|  | int proto, | 
|  | union eth1394_hdr *hdr, | 
|  | u16 dg_size, u16 dgl) | 
|  | { | 
|  | unsigned int adj_max_payload = max_payload - hdr_type_len[ETH1394_HDR_LF_UF]; | 
|  |  | 
|  | /* Does it all fit in one packet? */ | 
|  | if (dg_size <= adj_max_payload) { | 
|  | hdr->uf.lf = ETH1394_HDR_LF_UF; | 
|  | hdr->uf.ether_type = proto; | 
|  | } else { | 
|  | hdr->ff.lf = ETH1394_HDR_LF_FF; | 
|  | hdr->ff.ether_type = proto; | 
|  | hdr->ff.dg_size = dg_size - 1; | 
|  | hdr->ff.dgl = dgl; | 
|  | adj_max_payload = max_payload - hdr_type_len[ETH1394_HDR_LF_FF]; | 
|  | } | 
|  | return((dg_size + (adj_max_payload - 1)) / adj_max_payload); | 
|  | } | 
|  |  | 
|  | static inline unsigned int ether1394_encapsulate(struct sk_buff *skb, | 
|  | unsigned int max_payload, | 
|  | union eth1394_hdr *hdr) | 
|  | { | 
|  | union eth1394_hdr *bufhdr; | 
|  | int ftype = hdr->common.lf; | 
|  | int hdrsz = hdr_type_len[ftype]; | 
|  | unsigned int adj_max_payload = max_payload - hdrsz; | 
|  |  | 
|  | switch(ftype) { | 
|  | case ETH1394_HDR_LF_UF: | 
|  | bufhdr = (union eth1394_hdr *)skb_push(skb, hdrsz); | 
|  | bufhdr->words.word1 = htons(hdr->words.word1); | 
|  | bufhdr->words.word2 = hdr->words.word2; | 
|  | break; | 
|  |  | 
|  | case ETH1394_HDR_LF_FF: | 
|  | bufhdr = (union eth1394_hdr *)skb_push(skb, hdrsz); | 
|  | bufhdr->words.word1 = htons(hdr->words.word1); | 
|  | bufhdr->words.word2 = hdr->words.word2; | 
|  | bufhdr->words.word3 = htons(hdr->words.word3); | 
|  | bufhdr->words.word4 = 0; | 
|  |  | 
|  | /* Set frag type here for future interior fragments */ | 
|  | hdr->common.lf = ETH1394_HDR_LF_IF; | 
|  | hdr->sf.fg_off = 0; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | hdr->sf.fg_off += adj_max_payload; | 
|  | bufhdr = (union eth1394_hdr *)skb_pull(skb, adj_max_payload); | 
|  | if (max_payload >= skb->len) | 
|  | hdr->common.lf = ETH1394_HDR_LF_LF; | 
|  | bufhdr->words.word1 = htons(hdr->words.word1); | 
|  | bufhdr->words.word2 = htons(hdr->words.word2); | 
|  | bufhdr->words.word3 = htons(hdr->words.word3); | 
|  | bufhdr->words.word4 = 0; | 
|  | } | 
|  |  | 
|  | return min(max_payload, skb->len); | 
|  | } | 
|  |  | 
|  | static inline struct hpsb_packet *ether1394_alloc_common_packet(struct hpsb_host *host) | 
|  | { | 
|  | struct hpsb_packet *p; | 
|  |  | 
|  | p = hpsb_alloc_packet(0); | 
|  | if (p) { | 
|  | p->host = host; | 
|  | p->generation = get_hpsb_generation(host); | 
|  | p->type = hpsb_async; | 
|  | } | 
|  | return p; | 
|  | } | 
|  |  | 
|  | static inline int ether1394_prep_write_packet(struct hpsb_packet *p, | 
|  | struct hpsb_host *host, | 
|  | nodeid_t node, u64 addr, | 
|  | void * data, int tx_len) | 
|  | { | 
|  | p->node_id = node; | 
|  | p->data = NULL; | 
|  |  | 
|  | p->tcode = TCODE_WRITEB; | 
|  | p->header[1] = (host->node_id << 16) | (addr >> 32); | 
|  | p->header[2] = addr & 0xffffffff; | 
|  |  | 
|  | p->header_size = 16; | 
|  | p->expect_response = 1; | 
|  |  | 
|  | if (hpsb_get_tlabel(p)) { | 
|  | ETH1394_PRINT_G(KERN_ERR, "No more tlabels left while sending " | 
|  | "to node " NODE_BUS_FMT "\n", NODE_BUS_ARGS(host, node)); | 
|  | return -1; | 
|  | } | 
|  | p->header[0] = (p->node_id << 16) | (p->tlabel << 10) | 
|  | | (1 << 8) | (TCODE_WRITEB << 4); | 
|  |  | 
|  | p->header[3] = tx_len << 16; | 
|  | p->data_size = (tx_len + 3) & ~3; | 
|  | p->data = (quadlet_t*)data; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline void ether1394_prep_gasp_packet(struct hpsb_packet *p, | 
|  | struct eth1394_priv *priv, | 
|  | struct sk_buff *skb, int length) | 
|  | { | 
|  | p->header_size = 4; | 
|  | p->tcode = TCODE_STREAM_DATA; | 
|  |  | 
|  | p->header[0] = (length << 16) | (3 << 14) | 
|  | | ((priv->broadcast_channel) << 8) | 
|  | | (TCODE_STREAM_DATA << 4); | 
|  | p->data_size = length; | 
|  | p->data = ((quadlet_t*)skb->data) - 2; | 
|  | p->data[0] = cpu_to_be32((priv->host->node_id << 16) | | 
|  | ETHER1394_GASP_SPECIFIER_ID_HI); | 
|  | p->data[1] = __constant_cpu_to_be32((ETHER1394_GASP_SPECIFIER_ID_LO << 24) | | 
|  | ETHER1394_GASP_VERSION); | 
|  |  | 
|  | /* Setting the node id to ALL_NODES (not LOCAL_BUS | ALL_NODES) | 
|  | * prevents hpsb_send_packet() from setting the speed to an arbitrary | 
|  | * value based on packet->node_id if packet->node_id is not set. */ | 
|  | p->node_id = ALL_NODES; | 
|  | p->speed_code = priv->bc_sspd; | 
|  | } | 
|  |  | 
|  | static inline void ether1394_free_packet(struct hpsb_packet *packet) | 
|  | { | 
|  | if (packet->tcode != TCODE_STREAM_DATA) | 
|  | hpsb_free_tlabel(packet); | 
|  | hpsb_free_packet(packet); | 
|  | } | 
|  |  | 
|  | static void ether1394_complete_cb(void *__ptask); | 
|  |  | 
|  | static int ether1394_send_packet(struct packet_task *ptask, unsigned int tx_len) | 
|  | { | 
|  | struct eth1394_priv *priv = ptask->priv; | 
|  | struct hpsb_packet *packet = NULL; | 
|  |  | 
|  | packet = ether1394_alloc_common_packet(priv->host); | 
|  | if (!packet) | 
|  | return -1; | 
|  |  | 
|  | if (ptask->tx_type == ETH1394_GASP) { | 
|  | int length = tx_len + (2 * sizeof(quadlet_t)); | 
|  |  | 
|  | ether1394_prep_gasp_packet(packet, priv, ptask->skb, length); | 
|  | } else if (ether1394_prep_write_packet(packet, priv->host, | 
|  | ptask->dest_node, | 
|  | ptask->addr, ptask->skb->data, | 
|  | tx_len)) { | 
|  | hpsb_free_packet(packet); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | ptask->packet = packet; | 
|  | hpsb_set_packet_complete_task(ptask->packet, ether1394_complete_cb, | 
|  | ptask); | 
|  |  | 
|  | if (hpsb_send_packet(packet) < 0) { | 
|  | ether1394_free_packet(packet); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Task function to be run when a datagram transmission is completed */ | 
|  | static inline void ether1394_dg_complete(struct packet_task *ptask, int fail) | 
|  | { | 
|  | struct sk_buff *skb = ptask->skb; | 
|  | struct net_device *dev = skb->dev; | 
|  | struct eth1394_priv *priv = netdev_priv(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | /* Statistics */ | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | if (fail) { | 
|  | priv->stats.tx_dropped++; | 
|  | priv->stats.tx_errors++; | 
|  | } else { | 
|  | priv->stats.tx_bytes += skb->len; | 
|  | priv->stats.tx_packets++; | 
|  | } | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | dev_kfree_skb_any(skb); | 
|  | kmem_cache_free(packet_task_cache, ptask); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Callback for when a packet has been sent and the status of that packet is | 
|  | * known */ | 
|  | static void ether1394_complete_cb(void *__ptask) | 
|  | { | 
|  | struct packet_task *ptask = (struct packet_task *)__ptask; | 
|  | struct hpsb_packet *packet = ptask->packet; | 
|  | int fail = 0; | 
|  |  | 
|  | if (packet->tcode != TCODE_STREAM_DATA) | 
|  | fail = hpsb_packet_success(packet); | 
|  |  | 
|  | ether1394_free_packet(packet); | 
|  |  | 
|  | ptask->outstanding_pkts--; | 
|  | if (ptask->outstanding_pkts > 0 && !fail) { | 
|  | int tx_len; | 
|  |  | 
|  | /* Add the encapsulation header to the fragment */ | 
|  | tx_len = ether1394_encapsulate(ptask->skb, ptask->max_payload, | 
|  | &ptask->hdr); | 
|  | if (ether1394_send_packet(ptask, tx_len)) | 
|  | ether1394_dg_complete(ptask, 1); | 
|  | } else { | 
|  | ether1394_dg_complete(ptask, fail); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* Transmit a packet (called by kernel) */ | 
|  | static int ether1394_tx (struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | gfp_t kmflags = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; | 
|  | struct eth1394hdr *eth; | 
|  | struct eth1394_priv *priv = netdev_priv(dev); | 
|  | int proto; | 
|  | unsigned long flags; | 
|  | nodeid_t dest_node; | 
|  | eth1394_tx_type tx_type; | 
|  | int ret = 0; | 
|  | unsigned int tx_len; | 
|  | unsigned int max_payload; | 
|  | u16 dg_size; | 
|  | u16 dgl; | 
|  | struct packet_task *ptask; | 
|  | struct eth1394_node_ref *node; | 
|  | struct eth1394_node_info *node_info = NULL; | 
|  |  | 
|  | ptask = kmem_cache_alloc(packet_task_cache, kmflags); | 
|  | if (ptask == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | /* XXX Ignore this for now. Noticed that when MacOSX is the IRM, | 
|  | * it does not set our validity bit. We need to compensate for | 
|  | * that somewhere else, but not in eth1394. */ | 
|  | #if 0 | 
|  | if ((priv->host->csr.broadcast_channel & 0xc0000000) != 0xc0000000) { | 
|  | ret = -EAGAIN; | 
|  | goto fail; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if ((skb = skb_share_check (skb, kmflags)) == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | /* Get rid of the fake eth1394 header, but save a pointer */ | 
|  | eth = (struct eth1394hdr*)skb->data; | 
|  | skb_pull(skb, ETH1394_HLEN); | 
|  |  | 
|  | proto = eth->h_proto; | 
|  | dg_size = skb->len; | 
|  |  | 
|  | /* Set the transmission type for the packet.  ARP packets and IP | 
|  | * broadcast packets are sent via GASP. */ | 
|  | if (memcmp(eth->h_dest, dev->broadcast, ETH1394_ALEN) == 0 || | 
|  | proto == __constant_htons(ETH_P_ARP) || | 
|  | (proto == __constant_htons(ETH_P_IP) && | 
|  | IN_MULTICAST(__constant_ntohl(skb->nh.iph->daddr)))) { | 
|  | tx_type = ETH1394_GASP; | 
|  | dest_node = LOCAL_BUS | ALL_NODES; | 
|  | max_payload = priv->bc_maxpayload - ETHER1394_GASP_OVERHEAD; | 
|  | BUG_ON(max_payload < (512 - ETHER1394_GASP_OVERHEAD)); | 
|  | dgl = priv->bc_dgl; | 
|  | if (max_payload < dg_size + hdr_type_len[ETH1394_HDR_LF_UF]) | 
|  | priv->bc_dgl++; | 
|  | } else { | 
|  | node = eth1394_find_node_guid(&priv->ip_node_list, | 
|  | be64_to_cpu(*(u64*)eth->h_dest)); | 
|  | if (!node) { | 
|  | ret = -EAGAIN; | 
|  | goto fail; | 
|  | } | 
|  | node_info = (struct eth1394_node_info*)node->ud->device.driver_data; | 
|  | if (node_info->fifo == ETHER1394_INVALID_ADDR) { | 
|  | ret = -EAGAIN; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | dest_node = node->ud->ne->nodeid; | 
|  | max_payload = node_info->maxpayload; | 
|  | BUG_ON(max_payload < (512 - ETHER1394_GASP_OVERHEAD)); | 
|  |  | 
|  | dgl = node_info->dgl; | 
|  | if (max_payload < dg_size + hdr_type_len[ETH1394_HDR_LF_UF]) | 
|  | node_info->dgl++; | 
|  | tx_type = ETH1394_WRREQ; | 
|  | } | 
|  |  | 
|  | /* If this is an ARP packet, convert it */ | 
|  | if (proto == __constant_htons (ETH_P_ARP)) | 
|  | ether1394_arp_to_1394arp (skb, dev); | 
|  |  | 
|  | ptask->hdr.words.word1 = 0; | 
|  | ptask->hdr.words.word2 = 0; | 
|  | ptask->hdr.words.word3 = 0; | 
|  | ptask->hdr.words.word4 = 0; | 
|  | ptask->skb = skb; | 
|  | ptask->priv = priv; | 
|  | ptask->tx_type = tx_type; | 
|  |  | 
|  | if (tx_type != ETH1394_GASP) { | 
|  | u64 addr; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | addr = node_info->fifo; | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | ptask->addr = addr; | 
|  | ptask->dest_node = dest_node; | 
|  | } | 
|  |  | 
|  | ptask->tx_type = tx_type; | 
|  | ptask->max_payload = max_payload; | 
|  | ptask->outstanding_pkts = ether1394_encapsulate_prep(max_payload, proto, | 
|  | &ptask->hdr, dg_size, | 
|  | dgl); | 
|  |  | 
|  | /* Add the encapsulation header to the fragment */ | 
|  | tx_len = ether1394_encapsulate(skb, max_payload, &ptask->hdr); | 
|  | dev->trans_start = jiffies; | 
|  | if (ether1394_send_packet(ptask, tx_len)) | 
|  | goto fail; | 
|  |  | 
|  | netif_wake_queue(dev); | 
|  | return 0; | 
|  | fail: | 
|  | if (ptask) | 
|  | kmem_cache_free(packet_task_cache, ptask); | 
|  |  | 
|  | if (skb != NULL) | 
|  | dev_kfree_skb(skb); | 
|  |  | 
|  | spin_lock_irqsave (&priv->lock, flags); | 
|  | priv->stats.tx_dropped++; | 
|  | priv->stats.tx_errors++; | 
|  | spin_unlock_irqrestore (&priv->lock, flags); | 
|  |  | 
|  | if (netif_queue_stopped(dev)) | 
|  | netif_wake_queue(dev); | 
|  |  | 
|  | return 0;  /* returning non-zero causes serious problems */ | 
|  | } | 
|  |  | 
|  | static void ether1394_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) | 
|  | { | 
|  | strcpy (info->driver, driver_name); | 
|  | strcpy (info->version, "$Rev: 1312 $"); | 
|  | /* FIXME XXX provide sane businfo */ | 
|  | strcpy (info->bus_info, "ieee1394"); | 
|  | } | 
|  |  | 
|  | static struct ethtool_ops ethtool_ops = { | 
|  | .get_drvinfo = ether1394_get_drvinfo | 
|  | }; | 
|  |  | 
|  | static int __init ether1394_init_module (void) | 
|  | { | 
|  | packet_task_cache = kmem_cache_create("packet_task", sizeof(struct packet_task), | 
|  | 0, 0, NULL, NULL); | 
|  |  | 
|  | /* Register ourselves as a highlevel driver */ | 
|  | hpsb_register_highlevel(ð1394_highlevel); | 
|  |  | 
|  | return hpsb_register_protocol(ð1394_proto_driver); | 
|  | } | 
|  |  | 
|  | static void __exit ether1394_exit_module (void) | 
|  | { | 
|  | hpsb_unregister_protocol(ð1394_proto_driver); | 
|  | hpsb_unregister_highlevel(ð1394_highlevel); | 
|  | kmem_cache_destroy(packet_task_cache); | 
|  | } | 
|  |  | 
|  | module_init(ether1394_init_module); | 
|  | module_exit(ether1394_exit_module); |