|  | /* | 
|  | *  drivers/s390/cio/chsc.c | 
|  | *   S/390 common I/O routines -- channel subsystem call | 
|  | *   $Revision: 1.120 $ | 
|  | * | 
|  | *    Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH, | 
|  | *			      IBM Corporation | 
|  | *    Author(s): Ingo Adlung (adlung@de.ibm.com) | 
|  | *		 Cornelia Huck (cohuck@de.ibm.com) | 
|  | *		 Arnd Bergmann (arndb@de.ibm.com) | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/config.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/device.h> | 
|  |  | 
|  | #include <asm/cio.h> | 
|  |  | 
|  | #include "css.h" | 
|  | #include "cio.h" | 
|  | #include "cio_debug.h" | 
|  | #include "ioasm.h" | 
|  | #include "chsc.h" | 
|  |  | 
|  | static struct channel_path *chps[NR_CHPIDS]; | 
|  |  | 
|  | static void *sei_page; | 
|  |  | 
|  | static int new_channel_path(int chpid); | 
|  |  | 
|  | static inline void | 
|  | set_chp_logically_online(int chp, int onoff) | 
|  | { | 
|  | chps[chp]->state = onoff; | 
|  | } | 
|  |  | 
|  | static int | 
|  | get_chp_status(int chp) | 
|  | { | 
|  | return (chps[chp] ? chps[chp]->state : -ENODEV); | 
|  | } | 
|  |  | 
|  | void | 
|  | chsc_validate_chpids(struct subchannel *sch) | 
|  | { | 
|  | int mask, chp; | 
|  |  | 
|  | for (chp = 0; chp <= 7; chp++) { | 
|  | mask = 0x80 >> chp; | 
|  | if (!get_chp_status(sch->schib.pmcw.chpid[chp])) | 
|  | /* disable using this path */ | 
|  | sch->opm &= ~mask; | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | chpid_is_actually_online(int chp) | 
|  | { | 
|  | int state; | 
|  |  | 
|  | state = get_chp_status(chp); | 
|  | if (state < 0) { | 
|  | need_rescan = 1; | 
|  | queue_work(slow_path_wq, &slow_path_work); | 
|  | } else | 
|  | WARN_ON(!state); | 
|  | } | 
|  |  | 
|  | /* FIXME: this is _always_ called for every subchannel. shouldn't we | 
|  | *	  process more than one at a time? */ | 
|  | static int | 
|  | chsc_get_sch_desc_irq(struct subchannel *sch, void *page) | 
|  | { | 
|  | int ccode, j; | 
|  |  | 
|  | struct { | 
|  | struct chsc_header request; | 
|  | u16 reserved1; | 
|  | u16 f_sch;	  /* first subchannel */ | 
|  | u16 reserved2; | 
|  | u16 l_sch;	  /* last subchannel */ | 
|  | u32 reserved3; | 
|  | struct chsc_header response; | 
|  | u32 reserved4; | 
|  | u8 sch_valid : 1; | 
|  | u8 dev_valid : 1; | 
|  | u8 st	     : 3; /* subchannel type */ | 
|  | u8 zeroes    : 3; | 
|  | u8  unit_addr;	  /* unit address */ | 
|  | u16 devno;	  /* device number */ | 
|  | u8 path_mask; | 
|  | u8 fla_valid_mask; | 
|  | u16 sch;	  /* subchannel */ | 
|  | u8 chpid[8];	  /* chpids 0-7 */ | 
|  | u16 fla[8];	  /* full link addresses 0-7 */ | 
|  | } *ssd_area; | 
|  |  | 
|  | ssd_area = page; | 
|  |  | 
|  | ssd_area->request = (struct chsc_header) { | 
|  | .length = 0x0010, | 
|  | .code   = 0x0004, | 
|  | }; | 
|  |  | 
|  | ssd_area->f_sch = sch->irq; | 
|  | ssd_area->l_sch = sch->irq; | 
|  |  | 
|  | ccode = chsc(ssd_area); | 
|  | if (ccode > 0) { | 
|  | pr_debug("chsc returned with ccode = %d\n", ccode); | 
|  | return (ccode == 3) ? -ENODEV : -EBUSY; | 
|  | } | 
|  |  | 
|  | switch (ssd_area->response.code) { | 
|  | case 0x0001: /* everything ok */ | 
|  | break; | 
|  | case 0x0002: | 
|  | CIO_CRW_EVENT(2, "Invalid command!\n"); | 
|  | return -EINVAL; | 
|  | case 0x0003: | 
|  | CIO_CRW_EVENT(2, "Error in chsc request block!\n"); | 
|  | return -EINVAL; | 
|  | case 0x0004: | 
|  | CIO_CRW_EVENT(2, "Model does not provide ssd\n"); | 
|  | return -EOPNOTSUPP; | 
|  | default: | 
|  | CIO_CRW_EVENT(2, "Unknown CHSC response %d\n", | 
|  | ssd_area->response.code); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ssd_area->st stores the type of the detected | 
|  | * subchannel, with the following definitions: | 
|  | * | 
|  | * 0: I/O subchannel:	  All fields have meaning | 
|  | * 1: CHSC subchannel:	  Only sch_val, st and sch | 
|  | *			  have meaning | 
|  | * 2: Message subchannel: All fields except unit_addr | 
|  | *			  have meaning | 
|  | * 3: ADM subchannel:	  Only sch_val, st and sch | 
|  | *			  have meaning | 
|  | * | 
|  | * Other types are currently undefined. | 
|  | */ | 
|  | if (ssd_area->st > 3) { /* uhm, that looks strange... */ | 
|  | CIO_CRW_EVENT(0, "Strange subchannel type %d" | 
|  | " for sch %04x\n", ssd_area->st, sch->irq); | 
|  | /* | 
|  | * There may have been a new subchannel type defined in the | 
|  | * time since this code was written; since we don't know which | 
|  | * fields have meaning and what to do with it we just jump out | 
|  | */ | 
|  | return 0; | 
|  | } else { | 
|  | const char *type[4] = {"I/O", "chsc", "message", "ADM"}; | 
|  | CIO_CRW_EVENT(6, "ssd: sch %04x is %s subchannel\n", | 
|  | sch->irq, type[ssd_area->st]); | 
|  |  | 
|  | sch->ssd_info.valid = 1; | 
|  | sch->ssd_info.type = ssd_area->st; | 
|  | } | 
|  |  | 
|  | if (ssd_area->st == 0 || ssd_area->st == 2) { | 
|  | for (j = 0; j < 8; j++) { | 
|  | if (!((0x80 >> j) & ssd_area->path_mask & | 
|  | ssd_area->fla_valid_mask)) | 
|  | continue; | 
|  | sch->ssd_info.chpid[j] = ssd_area->chpid[j]; | 
|  | sch->ssd_info.fla[j]   = ssd_area->fla[j]; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int | 
|  | css_get_ssd_info(struct subchannel *sch) | 
|  | { | 
|  | int ret; | 
|  | void *page; | 
|  |  | 
|  | page = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); | 
|  | if (!page) | 
|  | return -ENOMEM; | 
|  | spin_lock_irq(&sch->lock); | 
|  | ret = chsc_get_sch_desc_irq(sch, page); | 
|  | if (ret) { | 
|  | static int cio_chsc_err_msg; | 
|  |  | 
|  | if (!cio_chsc_err_msg) { | 
|  | printk(KERN_ERR | 
|  | "chsc_get_sch_descriptions:" | 
|  | " Error %d while doing chsc; " | 
|  | "processing some machine checks may " | 
|  | "not work\n", ret); | 
|  | cio_chsc_err_msg = 1; | 
|  | } | 
|  | } | 
|  | spin_unlock_irq(&sch->lock); | 
|  | free_page((unsigned long)page); | 
|  | if (!ret) { | 
|  | int j, chpid; | 
|  | /* Allocate channel path structures, if needed. */ | 
|  | for (j = 0; j < 8; j++) { | 
|  | chpid = sch->ssd_info.chpid[j]; | 
|  | if (chpid && (get_chp_status(chpid) < 0)) | 
|  | new_channel_path(chpid); | 
|  | } | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | s390_subchannel_remove_chpid(struct device *dev, void *data) | 
|  | { | 
|  | int j; | 
|  | int mask; | 
|  | struct subchannel *sch; | 
|  | __u8 *chpid; | 
|  | struct schib schib; | 
|  |  | 
|  | sch = to_subchannel(dev); | 
|  | chpid = data; | 
|  | for (j = 0; j < 8; j++) | 
|  | if (sch->schib.pmcw.chpid[j] == *chpid) | 
|  | break; | 
|  | if (j >= 8) | 
|  | return 0; | 
|  |  | 
|  | mask = 0x80 >> j; | 
|  | spin_lock(&sch->lock); | 
|  |  | 
|  | stsch(sch->irq, &schib); | 
|  | if (!schib.pmcw.dnv) | 
|  | goto out_unreg; | 
|  | memcpy(&sch->schib, &schib, sizeof(struct schib)); | 
|  | /* Check for single path devices. */ | 
|  | if (sch->schib.pmcw.pim == 0x80) | 
|  | goto out_unreg; | 
|  | if (sch->vpm == mask) | 
|  | goto out_unreg; | 
|  |  | 
|  | if ((sch->schib.scsw.actl & (SCSW_ACTL_CLEAR_PEND | | 
|  | SCSW_ACTL_HALT_PEND | | 
|  | SCSW_ACTL_START_PEND | | 
|  | SCSW_ACTL_RESUME_PEND)) && | 
|  | (sch->schib.pmcw.lpum == mask)) { | 
|  | int cc = cio_cancel(sch); | 
|  |  | 
|  | if (cc == -ENODEV) | 
|  | goto out_unreg; | 
|  |  | 
|  | if (cc == -EINVAL) { | 
|  | cc = cio_clear(sch); | 
|  | if (cc == -ENODEV) | 
|  | goto out_unreg; | 
|  | /* Call handler. */ | 
|  | if (sch->driver && sch->driver->termination) | 
|  | sch->driver->termination(&sch->dev); | 
|  | goto out_unlock; | 
|  | } | 
|  | } else if ((sch->schib.scsw.actl & SCSW_ACTL_DEVACT) && | 
|  | (sch->schib.scsw.actl & SCSW_ACTL_SCHACT) && | 
|  | (sch->schib.pmcw.lpum == mask)) { | 
|  | int cc; | 
|  |  | 
|  | cc = cio_clear(sch); | 
|  | if (cc == -ENODEV) | 
|  | goto out_unreg; | 
|  | /* Call handler. */ | 
|  | if (sch->driver && sch->driver->termination) | 
|  | sch->driver->termination(&sch->dev); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | /* trigger path verification. */ | 
|  | if (sch->driver && sch->driver->verify) | 
|  | sch->driver->verify(&sch->dev); | 
|  | out_unlock: | 
|  | spin_unlock(&sch->lock); | 
|  | return 0; | 
|  | out_unreg: | 
|  | spin_unlock(&sch->lock); | 
|  | sch->lpm = 0; | 
|  | if (css_enqueue_subchannel_slow(sch->irq)) { | 
|  | css_clear_subchannel_slow_list(); | 
|  | need_rescan = 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | s390_set_chpid_offline( __u8 chpid) | 
|  | { | 
|  | char dbf_txt[15]; | 
|  |  | 
|  | sprintf(dbf_txt, "chpr%x", chpid); | 
|  | CIO_TRACE_EVENT(2, dbf_txt); | 
|  |  | 
|  | if (get_chp_status(chpid) <= 0) | 
|  | return; | 
|  |  | 
|  | bus_for_each_dev(&css_bus_type, NULL, &chpid, | 
|  | s390_subchannel_remove_chpid); | 
|  |  | 
|  | if (need_rescan || css_slow_subchannels_exist()) | 
|  | queue_work(slow_path_wq, &slow_path_work); | 
|  | } | 
|  |  | 
|  | static int | 
|  | s390_process_res_acc_sch(u8 chpid, __u16 fla, u32 fla_mask, | 
|  | struct subchannel *sch) | 
|  | { | 
|  | int found; | 
|  | int chp; | 
|  | int ccode; | 
|  |  | 
|  | found = 0; | 
|  | for (chp = 0; chp <= 7; chp++) | 
|  | /* | 
|  | * check if chpid is in information updated by ssd | 
|  | */ | 
|  | if (sch->ssd_info.valid && | 
|  | sch->ssd_info.chpid[chp] == chpid && | 
|  | (sch->ssd_info.fla[chp] & fla_mask) == fla) { | 
|  | found = 1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (found == 0) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * Do a stsch to update our subchannel structure with the | 
|  | * new path information and eventually check for logically | 
|  | * offline chpids. | 
|  | */ | 
|  | ccode = stsch(sch->irq, &sch->schib); | 
|  | if (ccode > 0) | 
|  | return 0; | 
|  |  | 
|  | return 0x80 >> chp; | 
|  | } | 
|  |  | 
|  | static int | 
|  | s390_process_res_acc (u8 chpid, __u16 fla, u32 fla_mask) | 
|  | { | 
|  | struct subchannel *sch; | 
|  | int irq, rc; | 
|  | char dbf_txt[15]; | 
|  |  | 
|  | sprintf(dbf_txt, "accpr%x", chpid); | 
|  | CIO_TRACE_EVENT( 2, dbf_txt); | 
|  | if (fla != 0) { | 
|  | sprintf(dbf_txt, "fla%x", fla); | 
|  | CIO_TRACE_EVENT( 2, dbf_txt); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * I/O resources may have become accessible. | 
|  | * Scan through all subchannels that may be concerned and | 
|  | * do a validation on those. | 
|  | * The more information we have (info), the less scanning | 
|  | * will we have to do. | 
|  | */ | 
|  |  | 
|  | if (!get_chp_status(chpid)) | 
|  | return 0; /* no need to do the rest */ | 
|  |  | 
|  | rc = 0; | 
|  | for (irq = 0; irq < __MAX_SUBCHANNELS; irq++) { | 
|  | int chp_mask, old_lpm; | 
|  |  | 
|  | sch = get_subchannel_by_schid(irq); | 
|  | if (!sch) { | 
|  | struct schib schib; | 
|  | int ret; | 
|  | /* | 
|  | * We don't know the device yet, but since a path | 
|  | * may be available now to the device we'll have | 
|  | * to do recognition again. | 
|  | * Since we don't have any idea about which chpid | 
|  | * that beast may be on we'll have to do a stsch | 
|  | * on all devices, grr... | 
|  | */ | 
|  | if (stsch(irq, &schib)) { | 
|  | /* We're through */ | 
|  | if (need_rescan) | 
|  | rc = -EAGAIN; | 
|  | break; | 
|  | } | 
|  | if (need_rescan) { | 
|  | rc = -EAGAIN; | 
|  | continue; | 
|  | } | 
|  | /* Put it on the slow path. */ | 
|  | ret = css_enqueue_subchannel_slow(irq); | 
|  | if (ret) { | 
|  | css_clear_subchannel_slow_list(); | 
|  | need_rescan = 1; | 
|  | } | 
|  | rc = -EAGAIN; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | spin_lock_irq(&sch->lock); | 
|  |  | 
|  | chp_mask = s390_process_res_acc_sch(chpid, fla, fla_mask, sch); | 
|  |  | 
|  | if (chp_mask == 0) { | 
|  |  | 
|  | spin_unlock_irq(&sch->lock); | 
|  | continue; | 
|  | } | 
|  | old_lpm = sch->lpm; | 
|  | sch->lpm = ((sch->schib.pmcw.pim & | 
|  | sch->schib.pmcw.pam & | 
|  | sch->schib.pmcw.pom) | 
|  | | chp_mask) & sch->opm; | 
|  | if (!old_lpm && sch->lpm) | 
|  | device_trigger_reprobe(sch); | 
|  | else if (sch->driver && sch->driver->verify) | 
|  | sch->driver->verify(&sch->dev); | 
|  |  | 
|  | spin_unlock_irq(&sch->lock); | 
|  | put_device(&sch->dev); | 
|  | if (fla_mask == 0xffff) | 
|  | break; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int | 
|  | __get_chpid_from_lir(void *data) | 
|  | { | 
|  | struct lir { | 
|  | u8  iq; | 
|  | u8  ic; | 
|  | u16 sci; | 
|  | /* incident-node descriptor */ | 
|  | u32 indesc[28]; | 
|  | /* attached-node descriptor */ | 
|  | u32 andesc[28]; | 
|  | /* incident-specific information */ | 
|  | u32 isinfo[28]; | 
|  | } *lir; | 
|  |  | 
|  | lir = (struct lir*) data; | 
|  | if (!(lir->iq&0x80)) | 
|  | /* NULL link incident record */ | 
|  | return -EINVAL; | 
|  | if (!(lir->indesc[0]&0xc0000000)) | 
|  | /* node descriptor not valid */ | 
|  | return -EINVAL; | 
|  | if (!(lir->indesc[0]&0x10000000)) | 
|  | /* don't handle device-type nodes - FIXME */ | 
|  | return -EINVAL; | 
|  | /* Byte 3 contains the chpid. Could also be CTCA, but we don't care */ | 
|  |  | 
|  | return (u16) (lir->indesc[0]&0x000000ff); | 
|  | } | 
|  |  | 
|  | int | 
|  | chsc_process_crw(void) | 
|  | { | 
|  | int chpid, ret; | 
|  | struct { | 
|  | struct chsc_header request; | 
|  | u32 reserved1; | 
|  | u32 reserved2; | 
|  | u32 reserved3; | 
|  | struct chsc_header response; | 
|  | u32 reserved4; | 
|  | u8  flags; | 
|  | u8  vf;		/* validity flags */ | 
|  | u8  rs;		/* reporting source */ | 
|  | u8  cc;		/* content code */ | 
|  | u16 fla;	/* full link address */ | 
|  | u16 rsid;	/* reporting source id */ | 
|  | u32 reserved5; | 
|  | u32 reserved6; | 
|  | u32 ccdf[96];	/* content-code dependent field */ | 
|  | /* ccdf has to be big enough for a link-incident record */ | 
|  | } *sei_area; | 
|  |  | 
|  | if (!sei_page) | 
|  | return 0; | 
|  | /* | 
|  | * build the chsc request block for store event information | 
|  | * and do the call | 
|  | * This function is only called by the machine check handler thread, | 
|  | * so we don't need locking for the sei_page. | 
|  | */ | 
|  | sei_area = sei_page; | 
|  |  | 
|  | CIO_TRACE_EVENT( 2, "prcss"); | 
|  | ret = 0; | 
|  | do { | 
|  | int ccode, status; | 
|  | memset(sei_area, 0, sizeof(*sei_area)); | 
|  |  | 
|  | sei_area->request = (struct chsc_header) { | 
|  | .length = 0x0010, | 
|  | .code   = 0x000e, | 
|  | }; | 
|  |  | 
|  | ccode = chsc(sei_area); | 
|  | if (ccode > 0) | 
|  | return 0; | 
|  |  | 
|  | switch (sei_area->response.code) { | 
|  | /* for debug purposes, check for problems */ | 
|  | case 0x0001: | 
|  | CIO_CRW_EVENT(4, "chsc_process_crw: event information " | 
|  | "successfully stored\n"); | 
|  | break; /* everything ok */ | 
|  | case 0x0002: | 
|  | CIO_CRW_EVENT(2, | 
|  | "chsc_process_crw: invalid command!\n"); | 
|  | return 0; | 
|  | case 0x0003: | 
|  | CIO_CRW_EVENT(2, "chsc_process_crw: error in chsc " | 
|  | "request block!\n"); | 
|  | return 0; | 
|  | case 0x0005: | 
|  | CIO_CRW_EVENT(2, "chsc_process_crw: no event " | 
|  | "information stored\n"); | 
|  | return 0; | 
|  | default: | 
|  | CIO_CRW_EVENT(2, "chsc_process_crw: chsc response %d\n", | 
|  | sei_area->response.code); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Check if we might have lost some information. */ | 
|  | if (sei_area->flags & 0x40) | 
|  | CIO_CRW_EVENT(2, "chsc_process_crw: Event information " | 
|  | "has been lost due to overflow!\n"); | 
|  |  | 
|  | if (sei_area->rs != 4) { | 
|  | CIO_CRW_EVENT(2, "chsc_process_crw: reporting source " | 
|  | "(%04X) isn't a chpid!\n", | 
|  | sei_area->rsid); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* which kind of information was stored? */ | 
|  | switch (sei_area->cc) { | 
|  | case 1: /* link incident*/ | 
|  | CIO_CRW_EVENT(4, "chsc_process_crw: " | 
|  | "channel subsystem reports link incident," | 
|  | " reporting source is chpid %x\n", | 
|  | sei_area->rsid); | 
|  | chpid = __get_chpid_from_lir(sei_area->ccdf); | 
|  | if (chpid < 0) | 
|  | CIO_CRW_EVENT(4, "%s: Invalid LIR, skipping\n", | 
|  | __FUNCTION__); | 
|  | else | 
|  | s390_set_chpid_offline(chpid); | 
|  | break; | 
|  |  | 
|  | case 2: /* i/o resource accessibiliy */ | 
|  | CIO_CRW_EVENT(4, "chsc_process_crw: " | 
|  | "channel subsystem reports some I/O " | 
|  | "devices may have become accessible\n"); | 
|  | pr_debug("Data received after sei: \n"); | 
|  | pr_debug("Validity flags: %x\n", sei_area->vf); | 
|  |  | 
|  | /* allocate a new channel path structure, if needed */ | 
|  | status = get_chp_status(sei_area->rsid); | 
|  | if (status < 0) | 
|  | new_channel_path(sei_area->rsid); | 
|  | else if (!status) | 
|  | return 0; | 
|  | if ((sei_area->vf & 0x80) == 0) { | 
|  | pr_debug("chpid: %x\n", sei_area->rsid); | 
|  | ret = s390_process_res_acc(sei_area->rsid, | 
|  | 0, 0); | 
|  | } else if ((sei_area->vf & 0xc0) == 0x80) { | 
|  | pr_debug("chpid: %x link addr: %x\n", | 
|  | sei_area->rsid, sei_area->fla); | 
|  | ret = s390_process_res_acc(sei_area->rsid, | 
|  | sei_area->fla, | 
|  | 0xff00); | 
|  | } else if ((sei_area->vf & 0xc0) == 0xc0) { | 
|  | pr_debug("chpid: %x full link addr: %x\n", | 
|  | sei_area->rsid, sei_area->fla); | 
|  | ret = s390_process_res_acc(sei_area->rsid, | 
|  | sei_area->fla, | 
|  | 0xffff); | 
|  | } | 
|  | pr_debug("\n"); | 
|  |  | 
|  | break; | 
|  |  | 
|  | default: /* other stuff */ | 
|  | CIO_CRW_EVENT(4, "chsc_process_crw: event %d\n", | 
|  | sei_area->cc); | 
|  | break; | 
|  | } | 
|  | } while (sei_area->flags & 0x80); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | chp_add(int chpid) | 
|  | { | 
|  | struct subchannel *sch; | 
|  | int irq, ret, rc; | 
|  | char dbf_txt[15]; | 
|  |  | 
|  | if (!get_chp_status(chpid)) | 
|  | return 0; /* no need to do the rest */ | 
|  |  | 
|  | sprintf(dbf_txt, "cadd%x", chpid); | 
|  | CIO_TRACE_EVENT(2, dbf_txt); | 
|  |  | 
|  | rc = 0; | 
|  | for (irq = 0; irq < __MAX_SUBCHANNELS; irq++) { | 
|  | int i; | 
|  |  | 
|  | sch = get_subchannel_by_schid(irq); | 
|  | if (!sch) { | 
|  | struct schib schib; | 
|  |  | 
|  | if (stsch(irq, &schib)) { | 
|  | /* We're through */ | 
|  | if (need_rescan) | 
|  | rc = -EAGAIN; | 
|  | break; | 
|  | } | 
|  | if (need_rescan) { | 
|  | rc = -EAGAIN; | 
|  | continue; | 
|  | } | 
|  | /* Put it on the slow path. */ | 
|  | ret = css_enqueue_subchannel_slow(irq); | 
|  | if (ret) { | 
|  | css_clear_subchannel_slow_list(); | 
|  | need_rescan = 1; | 
|  | } | 
|  | rc = -EAGAIN; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | spin_lock(&sch->lock); | 
|  | for (i=0; i<8; i++) | 
|  | if (sch->schib.pmcw.chpid[i] == chpid) { | 
|  | if (stsch(sch->irq, &sch->schib) != 0) { | 
|  | /* Endgame. */ | 
|  | spin_unlock(&sch->lock); | 
|  | return rc; | 
|  | } | 
|  | break; | 
|  | } | 
|  | if (i==8) { | 
|  | spin_unlock(&sch->lock); | 
|  | return rc; | 
|  | } | 
|  | sch->lpm = ((sch->schib.pmcw.pim & | 
|  | sch->schib.pmcw.pam & | 
|  | sch->schib.pmcw.pom) | 
|  | | 0x80 >> i) & sch->opm; | 
|  |  | 
|  | if (sch->driver && sch->driver->verify) | 
|  | sch->driver->verify(&sch->dev); | 
|  |  | 
|  | spin_unlock(&sch->lock); | 
|  | put_device(&sch->dev); | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handling of crw machine checks with channel path source. | 
|  | */ | 
|  | int | 
|  | chp_process_crw(int chpid, int on) | 
|  | { | 
|  | if (on == 0) { | 
|  | /* Path has gone. We use the link incident routine.*/ | 
|  | s390_set_chpid_offline(chpid); | 
|  | return 0; /* De-register is async anyway. */ | 
|  | } | 
|  | /* | 
|  | * Path has come. Allocate a new channel path structure, | 
|  | * if needed. | 
|  | */ | 
|  | if (get_chp_status(chpid) < 0) | 
|  | new_channel_path(chpid); | 
|  | /* Avoid the extra overhead in process_rec_acc. */ | 
|  | return chp_add(chpid); | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | __check_for_io_and_kill(struct subchannel *sch, int index) | 
|  | { | 
|  | int cc; | 
|  |  | 
|  | if (!device_is_online(sch)) | 
|  | /* cio could be doing I/O. */ | 
|  | return 0; | 
|  | cc = stsch(sch->irq, &sch->schib); | 
|  | if (cc) | 
|  | return 0; | 
|  | if (sch->schib.scsw.actl && sch->schib.pmcw.lpum == (0x80 >> index)) { | 
|  | device_set_waiting(sch); | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | __s390_subchannel_vary_chpid(struct subchannel *sch, __u8 chpid, int on) | 
|  | { | 
|  | int chp, old_lpm; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!sch->ssd_info.valid) | 
|  | return; | 
|  |  | 
|  | spin_lock_irqsave(&sch->lock, flags); | 
|  | old_lpm = sch->lpm; | 
|  | for (chp = 0; chp < 8; chp++) { | 
|  | if (sch->ssd_info.chpid[chp] != chpid) | 
|  | continue; | 
|  |  | 
|  | if (on) { | 
|  | sch->opm |= (0x80 >> chp); | 
|  | sch->lpm |= (0x80 >> chp); | 
|  | if (!old_lpm) | 
|  | device_trigger_reprobe(sch); | 
|  | else if (sch->driver && sch->driver->verify) | 
|  | sch->driver->verify(&sch->dev); | 
|  | } else { | 
|  | sch->opm &= ~(0x80 >> chp); | 
|  | sch->lpm &= ~(0x80 >> chp); | 
|  | /* | 
|  | * Give running I/O a grace period in which it | 
|  | * can successfully terminate, even using the | 
|  | * just varied off path. Then kill it. | 
|  | */ | 
|  | if (!__check_for_io_and_kill(sch, chp) && !sch->lpm) { | 
|  | if (css_enqueue_subchannel_slow(sch->irq)) { | 
|  | css_clear_subchannel_slow_list(); | 
|  | need_rescan = 1; | 
|  | } | 
|  | } else if (sch->driver && sch->driver->verify) | 
|  | sch->driver->verify(&sch->dev); | 
|  | } | 
|  | break; | 
|  | } | 
|  | spin_unlock_irqrestore(&sch->lock, flags); | 
|  | } | 
|  |  | 
|  | static int | 
|  | s390_subchannel_vary_chpid_off(struct device *dev, void *data) | 
|  | { | 
|  | struct subchannel *sch; | 
|  | __u8 *chpid; | 
|  |  | 
|  | sch = to_subchannel(dev); | 
|  | chpid = data; | 
|  |  | 
|  | __s390_subchannel_vary_chpid(sch, *chpid, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | s390_subchannel_vary_chpid_on(struct device *dev, void *data) | 
|  | { | 
|  | struct subchannel *sch; | 
|  | __u8 *chpid; | 
|  |  | 
|  | sch = to_subchannel(dev); | 
|  | chpid = data; | 
|  |  | 
|  | __s390_subchannel_vary_chpid(sch, *chpid, 1); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Function: s390_vary_chpid | 
|  | * Varies the specified chpid online or offline | 
|  | */ | 
|  | static int | 
|  | s390_vary_chpid( __u8 chpid, int on) | 
|  | { | 
|  | char dbf_text[15]; | 
|  | int status, irq, ret; | 
|  | struct subchannel *sch; | 
|  |  | 
|  | sprintf(dbf_text, on?"varyon%x":"varyoff%x", chpid); | 
|  | CIO_TRACE_EVENT( 2, dbf_text); | 
|  |  | 
|  | status = get_chp_status(chpid); | 
|  | if (status < 0) { | 
|  | printk(KERN_ERR "Can't vary unknown chpid %02X\n", chpid); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!on && !status) { | 
|  | printk(KERN_ERR "chpid %x is already offline\n", chpid); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | set_chp_logically_online(chpid, on); | 
|  |  | 
|  | /* | 
|  | * Redo PathVerification on the devices the chpid connects to | 
|  | */ | 
|  |  | 
|  | bus_for_each_dev(&css_bus_type, NULL, &chpid, on ? | 
|  | s390_subchannel_vary_chpid_on : | 
|  | s390_subchannel_vary_chpid_off); | 
|  | if (!on) | 
|  | goto out; | 
|  | /* Scan for new devices on varied on path. */ | 
|  | for (irq = 0; irq < __MAX_SUBCHANNELS; irq++) { | 
|  | struct schib schib; | 
|  |  | 
|  | if (need_rescan) | 
|  | break; | 
|  | sch = get_subchannel_by_schid(irq); | 
|  | if (sch) { | 
|  | put_device(&sch->dev); | 
|  | continue; | 
|  | } | 
|  | if (stsch(irq, &schib)) | 
|  | /* We're through */ | 
|  | break; | 
|  | /* Put it on the slow path. */ | 
|  | ret = css_enqueue_subchannel_slow(irq); | 
|  | if (ret) { | 
|  | css_clear_subchannel_slow_list(); | 
|  | need_rescan = 1; | 
|  | } | 
|  | } | 
|  | out: | 
|  | if (need_rescan || css_slow_subchannels_exist()) | 
|  | queue_work(slow_path_wq, &slow_path_work); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Files for the channel path entries. | 
|  | */ | 
|  | static ssize_t | 
|  | chp_status_show(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct channel_path *chp = container_of(dev, struct channel_path, dev); | 
|  |  | 
|  | if (!chp) | 
|  | return 0; | 
|  | return (get_chp_status(chp->id) ? sprintf(buf, "online\n") : | 
|  | sprintf(buf, "offline\n")); | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | chp_status_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | struct channel_path *cp = container_of(dev, struct channel_path, dev); | 
|  | char cmd[10]; | 
|  | int num_args; | 
|  | int error; | 
|  |  | 
|  | num_args = sscanf(buf, "%5s", cmd); | 
|  | if (!num_args) | 
|  | return count; | 
|  |  | 
|  | if (!strnicmp(cmd, "on", 2)) | 
|  | error = s390_vary_chpid(cp->id, 1); | 
|  | else if (!strnicmp(cmd, "off", 3)) | 
|  | error = s390_vary_chpid(cp->id, 0); | 
|  | else | 
|  | error = -EINVAL; | 
|  |  | 
|  | return error < 0 ? error : count; | 
|  |  | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(status, 0644, chp_status_show, chp_status_write); | 
|  |  | 
|  | static ssize_t | 
|  | chp_type_show(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct channel_path *chp = container_of(dev, struct channel_path, dev); | 
|  |  | 
|  | if (!chp) | 
|  | return 0; | 
|  | return sprintf(buf, "%x\n", chp->desc.desc); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(type, 0444, chp_type_show, NULL); | 
|  |  | 
|  | static struct attribute * chp_attrs[] = { | 
|  | &dev_attr_status.attr, | 
|  | &dev_attr_type.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct attribute_group chp_attr_group = { | 
|  | .attrs = chp_attrs, | 
|  | }; | 
|  |  | 
|  | static void | 
|  | chp_release(struct device *dev) | 
|  | { | 
|  | struct channel_path *cp; | 
|  |  | 
|  | cp = container_of(dev, struct channel_path, dev); | 
|  | kfree(cp); | 
|  | } | 
|  |  | 
|  | static int | 
|  | chsc_determine_channel_path_description(int chpid, | 
|  | struct channel_path_desc *desc) | 
|  | { | 
|  | int ccode, ret; | 
|  |  | 
|  | struct { | 
|  | struct chsc_header request; | 
|  | u32 : 24; | 
|  | u32 first_chpid : 8; | 
|  | u32 : 24; | 
|  | u32 last_chpid : 8; | 
|  | u32 zeroes1; | 
|  | struct chsc_header response; | 
|  | u32 zeroes2; | 
|  | struct channel_path_desc desc; | 
|  | } *scpd_area; | 
|  |  | 
|  | scpd_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); | 
|  | if (!scpd_area) | 
|  | return -ENOMEM; | 
|  |  | 
|  | scpd_area->request = (struct chsc_header) { | 
|  | .length = 0x0010, | 
|  | .code   = 0x0002, | 
|  | }; | 
|  |  | 
|  | scpd_area->first_chpid = chpid; | 
|  | scpd_area->last_chpid = chpid; | 
|  |  | 
|  | ccode = chsc(scpd_area); | 
|  | if (ccode > 0) { | 
|  | ret = (ccode == 3) ? -ENODEV : -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | switch (scpd_area->response.code) { | 
|  | case 0x0001: /* Success. */ | 
|  | memcpy(desc, &scpd_area->desc, | 
|  | sizeof(struct channel_path_desc)); | 
|  | ret = 0; | 
|  | break; | 
|  | case 0x0003: /* Invalid block. */ | 
|  | case 0x0007: /* Invalid format. */ | 
|  | case 0x0008: /* Other invalid block. */ | 
|  | CIO_CRW_EVENT(2, "Error in chsc request block!\n"); | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | case 0x0004: /* Command not provided in model. */ | 
|  | CIO_CRW_EVENT(2, "Model does not provide scpd\n"); | 
|  | ret = -EOPNOTSUPP; | 
|  | break; | 
|  | default: | 
|  | CIO_CRW_EVENT(2, "Unknown CHSC response %d\n", | 
|  | scpd_area->response.code); | 
|  | ret = -EIO; | 
|  | } | 
|  | out: | 
|  | free_page((unsigned long)scpd_area); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Entries for chpids on the system bus. | 
|  | * This replaces /proc/chpids. | 
|  | */ | 
|  | static int | 
|  | new_channel_path(int chpid) | 
|  | { | 
|  | struct channel_path *chp; | 
|  | int ret; | 
|  |  | 
|  | chp = kmalloc(sizeof(struct channel_path), GFP_KERNEL); | 
|  | if (!chp) | 
|  | return -ENOMEM; | 
|  | memset(chp, 0, sizeof(struct channel_path)); | 
|  |  | 
|  | /* fill in status, etc. */ | 
|  | chp->id = chpid; | 
|  | chp->state = 1; | 
|  | chp->dev = (struct device) { | 
|  | .parent  = &css_bus_device, | 
|  | .release = chp_release, | 
|  | }; | 
|  | snprintf(chp->dev.bus_id, BUS_ID_SIZE, "chp0.%x", chpid); | 
|  |  | 
|  | /* Obtain channel path description and fill it in. */ | 
|  | ret = chsc_determine_channel_path_description(chpid, &chp->desc); | 
|  | if (ret) | 
|  | goto out_free; | 
|  |  | 
|  | /* make it known to the system */ | 
|  | ret = device_register(&chp->dev); | 
|  | if (ret) { | 
|  | printk(KERN_WARNING "%s: could not register %02x\n", | 
|  | __func__, chpid); | 
|  | goto out_free; | 
|  | } | 
|  | ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group); | 
|  | if (ret) { | 
|  | device_unregister(&chp->dev); | 
|  | goto out_free; | 
|  | } else | 
|  | chps[chpid] = chp; | 
|  | return ret; | 
|  | out_free: | 
|  | kfree(chp); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void * | 
|  | chsc_get_chp_desc(struct subchannel *sch, int chp_no) | 
|  | { | 
|  | struct channel_path *chp; | 
|  | struct channel_path_desc *desc; | 
|  |  | 
|  | chp = chps[sch->schib.pmcw.chpid[chp_no]]; | 
|  | if (!chp) | 
|  | return NULL; | 
|  | desc = kmalloc(sizeof(struct channel_path_desc), GFP_KERNEL); | 
|  | if (!desc) | 
|  | return NULL; | 
|  | memcpy(desc, &chp->desc, sizeof(struct channel_path_desc)); | 
|  | return desc; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __init | 
|  | chsc_alloc_sei_area(void) | 
|  | { | 
|  | sei_page = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); | 
|  | if (!sei_page) | 
|  | printk(KERN_WARNING"Can't allocate page for processing of " \ | 
|  | "chsc machine checks!\n"); | 
|  | return (sei_page ? 0 : -ENOMEM); | 
|  | } | 
|  |  | 
|  | subsys_initcall(chsc_alloc_sei_area); | 
|  |  | 
|  | struct css_general_char css_general_characteristics; | 
|  | struct css_chsc_char css_chsc_characteristics; | 
|  |  | 
|  | int __init | 
|  | chsc_determine_css_characteristics(void) | 
|  | { | 
|  | int result; | 
|  | struct { | 
|  | struct chsc_header request; | 
|  | u32 reserved1; | 
|  | u32 reserved2; | 
|  | u32 reserved3; | 
|  | struct chsc_header response; | 
|  | u32 reserved4; | 
|  | u32 general_char[510]; | 
|  | u32 chsc_char[518]; | 
|  | } *scsc_area; | 
|  |  | 
|  | scsc_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); | 
|  | if (!scsc_area) { | 
|  | printk(KERN_WARNING"cio: Was not able to determine available" \ | 
|  | "CHSCs due to no memory.\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | scsc_area->request = (struct chsc_header) { | 
|  | .length = 0x0010, | 
|  | .code   = 0x0010, | 
|  | }; | 
|  |  | 
|  | result = chsc(scsc_area); | 
|  | if (result) { | 
|  | printk(KERN_WARNING"cio: Was not able to determine " \ | 
|  | "available CHSCs, cc=%i.\n", result); | 
|  | result = -EIO; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (scsc_area->response.code != 1) { | 
|  | printk(KERN_WARNING"cio: Was not able to determine " \ | 
|  | "available CHSCs.\n"); | 
|  | result = -EIO; | 
|  | goto exit; | 
|  | } | 
|  | memcpy(&css_general_characteristics, scsc_area->general_char, | 
|  | sizeof(css_general_characteristics)); | 
|  | memcpy(&css_chsc_characteristics, scsc_area->chsc_char, | 
|  | sizeof(css_chsc_characteristics)); | 
|  | exit: | 
|  | free_page ((unsigned long) scsc_area); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL_GPL(css_general_characteristics); | 
|  | EXPORT_SYMBOL_GPL(css_chsc_characteristics); |