USB: EHCI: Add I2C support for SMSC hsic hub
Currently default configuration will be active
during SMSC hub enumeration. For changing the default
configuration, requires I2C support for configuring
the configurable parameters of SMSC hub like VID,PID.
Change-Id: Ie0449b166ddaae990b9a69c3a75f8059250faf0e
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
diff --git a/drivers/misc/smsc_hub.c b/drivers/misc/smsc_hub.c
new file mode 100644
index 0000000..d3304eb
--- /dev/null
+++ b/drivers/misc/smsc_hub.c
@@ -0,0 +1,355 @@
+/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/smsc3503.h>
+#include <mach/msm_xo.h>
+
+#define SMSC3503_I2C_ADDR 0x08
+#define SMSC_GSBI_I2C_BUS_ID 10
+static const unsigned short normal_i2c[] = {
+SMSC3503_I2C_ADDR, I2C_CLIENT_END };
+
+struct hsic_hub {
+ struct regulator *hsic_hub_reg;
+ struct device *dev;
+ struct i2c_client *client;
+ struct msm_xo_voter *xo_handle;
+};
+static struct hsic_hub *smsc_hub;
+
+/* APIs for setting/clearing bits and for reading/writing values */
+static inline int hsic_hub_get_u8(struct i2c_client *client, u8 reg)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0)
+ pr_err("%s:i2c_read8 failed\n", __func__);
+ return ret;
+}
+
+static inline int hsic_hub_get_u16(struct i2c_client *client, u8 reg)
+{
+ int ret;
+
+ ret = i2c_smbus_read_word_data(client, reg);
+ if (ret < 0)
+ pr_err("%s:i2c_read16 failed\n", __func__);
+ return ret;
+}
+
+static inline int hsic_hub_write_word_data(struct i2c_client *client, u8 reg,
+ u16 value)
+{
+ int ret;
+
+ ret = i2c_smbus_write_word_data(client, reg, value);
+ if (ret)
+ pr_err("%s:i2c_write16 failed\n", __func__);
+ return ret;
+}
+
+static inline int hsic_hub_write_byte_data(struct i2c_client *client, u8 reg,
+ u8 value)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, reg, value);
+ if (ret)
+ pr_err("%s:i2c_write_byte_data failed\n", __func__);
+ return ret;
+}
+
+static inline int hsic_hub_set_bits(struct i2c_client *client, u8 reg,
+ u8 value)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ pr_err("%s:i2c_read_byte_data failed\n", __func__);
+ return ret;
+ }
+ return i2c_smbus_write_byte_data(client, reg, (ret | value));
+}
+
+static inline int hsic_hub_clear_bits(struct i2c_client *client, u8 reg,
+ u8 value)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ pr_err("%s:i2c_read_byte_data failed\n", __func__);
+ return ret;
+ }
+ return i2c_smbus_write_byte_data(client, reg, (ret & ~value));
+}
+
+static int i2c_hsic_hub_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ return -EIO;
+
+ return 0;
+}
+
+static int i2c_hsic_hub_remove(struct i2c_client *client)
+{
+ return 0;
+}
+
+static const struct i2c_device_id hsic_hub_id[] = {
+ {"i2c_hsic_hub", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, hsichub_id);
+
+static struct i2c_driver hsic_hub_driver = {
+ .driver = {
+ .name = "i2c_hsic_hub",
+ },
+ .probe = i2c_hsic_hub_probe,
+ .remove = i2c_hsic_hub_remove,
+ .id_table = hsic_hub_id,
+};
+
+#define HSIC_HUB_VDD_VOL_MIN 1650000 /* uV */
+#define HSIC_HUB_VDD_VOL_MAX 1950000 /* uV */
+#define HSIC_HUB_VDD_LOAD 36000 /* uA */
+static int __devinit smsc_hub_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ const struct smsc_hub_platform_data *pdata;
+ struct i2c_adapter *i2c_adap;
+ struct i2c_board_info i2c_info;
+
+ if (!pdev->dev.platform_data) {
+ dev_err(&pdev->dev, "No platform data\n");
+ return -ENODEV;
+ }
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata->hub_reset)
+ return -EINVAL;
+
+ smsc_hub = kzalloc(sizeof(*smsc_hub), GFP_KERNEL);
+ if (!smsc_hub)
+ return -ENOMEM;
+
+ smsc_hub->hsic_hub_reg = regulator_get(&pdev->dev, "EXT_HUB_VDDIO");
+ if (IS_ERR(smsc_hub->hsic_hub_reg)) {
+ dev_err(&pdev->dev, "unable to get ext hub vddcx\n");
+ ret = PTR_ERR(smsc_hub->hsic_hub_reg);
+ goto free_mem;
+ }
+
+ ret = gpio_request(pdata->hub_reset, "HSIC_HUB_RESET_GPIO");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "gpio request failed for GPIO%d\n",
+ pdata->hub_reset);
+ goto gpio_req_fail;
+ }
+
+ ret = regulator_set_voltage(smsc_hub->hsic_hub_reg,
+ HSIC_HUB_VDD_VOL_MIN,
+ HSIC_HUB_VDD_VOL_MAX);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set the voltage"
+ "for hsic hub reg\n");
+ goto reg_set_voltage_fail;
+ }
+
+ ret = regulator_set_optimum_mode(smsc_hub->hsic_hub_reg,
+ HSIC_HUB_VDD_LOAD);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Unable to set optimum mode of regulator:"
+ "VDDCX\n");
+ goto reg_optimum_mode_fail;
+ }
+
+ ret = regulator_enable(smsc_hub->hsic_hub_reg);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable ext hub vddcx\n");
+ goto reg_enable_fail;
+ }
+
+ smsc_hub->xo_handle = msm_xo_get(MSM_XO_TCXO_D1, "hsic_hub");
+ if (IS_ERR(smsc_hub->xo_handle)) {
+ dev_err(&pdev->dev, "not able to get the handle"
+ "for TCXO D1 buffer\n");
+ goto disable_regulator;
+ }
+
+ ret = msm_xo_mode_vote(smsc_hub->xo_handle, MSM_XO_MODE_ON);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to vote for TCXO"
+ "D1 buffer\n");
+ goto xo_vote_fail;
+ }
+
+ gpio_direction_output(pdata->hub_reset, 0);
+ /* Hub reset should be asserted for minimum 2microsec
+ * before deasserting.
+ */
+ udelay(5);
+ gpio_direction_output(pdata->hub_reset, 1);
+
+ ret = i2c_add_driver(&hsic_hub_driver);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add I2C hsic_hub_driver\n");
+ goto i2c_add_fail;
+ }
+ usleep_range(10000, 12000);
+ i2c_adap = i2c_get_adapter(SMSC_GSBI_I2C_BUS_ID);
+
+ if (!i2c_adap) {
+ dev_err(&pdev->dev, "failed to get i2c adapter\n");
+ i2c_del_driver(&hsic_hub_driver);
+ goto i2c_add_fail;
+ }
+
+ memset(&i2c_info, 0, sizeof(struct i2c_board_info));
+ strlcpy(i2c_info.type, "i2c_hsic_hub", I2C_NAME_SIZE);
+
+ smsc_hub->client = i2c_new_probed_device(i2c_adap, &i2c_info,
+ normal_i2c, NULL);
+ i2c_put_adapter(i2c_adap);
+ if (!smsc_hub->client)
+ dev_err(&pdev->dev, "failed to connect to smsc_hub"
+ "through I2C\n");
+
+i2c_add_fail:
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+
+xo_vote_fail:
+ msm_xo_put(smsc_hub->xo_handle);
+disable_regulator:
+ regulator_disable(smsc_hub->hsic_hub_reg);
+reg_enable_fail:
+ regulator_set_optimum_mode(smsc_hub->hsic_hub_reg, 0);
+reg_optimum_mode_fail:
+ regulator_set_voltage(smsc_hub->hsic_hub_reg, 0,
+ HSIC_HUB_VDD_VOL_MIN);
+reg_set_voltage_fail:
+ gpio_free(pdata->hub_reset);
+gpio_req_fail:
+ regulator_put(smsc_hub->hsic_hub_reg);
+free_mem:
+ kfree(smsc_hub);
+
+ return ret;
+}
+
+static int smsc_hub_remove(struct platform_device *pdev)
+{
+ const struct smsc_hub_platform_data *pdata;
+
+ pdata = pdev->dev.platform_data;
+ if (smsc_hub->client) {
+ i2c_unregister_device(smsc_hub->client);
+ smsc_hub->client = NULL;
+ i2c_del_driver(&hsic_hub_driver);
+ }
+ pm_runtime_disable(&pdev->dev);
+ msm_xo_put(smsc_hub->xo_handle);
+
+ regulator_disable(smsc_hub->hsic_hub_reg);
+ regulator_set_optimum_mode(smsc_hub->hsic_hub_reg, 0);
+ regulator_set_voltage(smsc_hub->hsic_hub_reg, 0,
+ HSIC_HUB_VDD_VOL_MIN);
+ gpio_free(pdata->hub_reset);
+ regulator_put(smsc_hub->hsic_hub_reg);
+ kfree(smsc_hub);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int msm_smsc_runtime_idle(struct device *dev)
+{
+ dev_dbg(dev, "SMSC HUB runtime idle\n");
+
+ return 0;
+}
+
+static int smsc_hub_lpm_enter(struct device *dev)
+{
+ int ret;
+
+ ret = msm_xo_mode_vote(smsc_hub->xo_handle, MSM_XO_MODE_OFF);
+ if (ret) {
+ pr_err("%s: failed to devote for TCXO"
+ "D1 buffer%d\n", __func__, ret);
+ }
+ return ret;
+}
+
+static int smsc_hub_lpm_exit(struct device *dev)
+{
+ int ret;
+
+ ret = msm_xo_mode_vote(smsc_hub->xo_handle, MSM_XO_MODE_ON);
+ if (ret) {
+ pr_err("%s: failed to vote for TCXO"
+ "D1 buffer%d\n", __func__, ret);
+ }
+ return ret;
+}
+#endif
+
+#ifdef CONFIG_PM
+static const struct dev_pm_ops smsc_hub_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(smsc_hub_lpm_enter, smsc_hub_lpm_exit)
+ SET_RUNTIME_PM_OPS(smsc_hub_lpm_enter, smsc_hub_lpm_exit,
+ msm_smsc_runtime_idle)
+};
+#endif
+
+static struct platform_driver smsc_hub_driver = {
+ .driver = {
+ .name = "msm_smsc_hub",
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &smsc_hub_dev_pm_ops,
+#endif
+ },
+ .remove = smsc_hub_remove,
+};
+
+static int __init smsc_hub_init(void)
+{
+ return platform_driver_probe(&smsc_hub_driver, smsc_hub_probe);
+}
+
+static void __exit smsc_hub_exit(void)
+{
+ platform_driver_unregister(&smsc_hub_driver);
+}
+subsys_initcall(smsc_hub_init);
+module_exit(smsc_hub_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SMSC HSIC HUB driver");