| |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP |
| |M68000 Hi-Performance Microprocessor Division |
| |M68060 Software Package |
| |Production Release P1.00 -- October 10, 1994 |
| | |
| |M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. |
| | |
| |THE SOFTWARE is provided on an "AS IS" basis and without warranty. |
| |To the maximum extent permitted by applicable law, |
| |MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, |
| |INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE |
| |and any warranty against infringement with regard to the SOFTWARE |
| |(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials. |
| | |
| |To the maximum extent permitted by applicable law, |
| |IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER |
| |(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, |
| |BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) |
| |ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. |
| |Motorola assumes no responsibility for the maintenance and support of the SOFTWARE. |
| | |
| |You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE |
| |so long as this entire notice is retained without alteration in any modified and/or |
| |redistributed versions, and that such modified versions are clearly identified as such. |
| |No licenses are granted by implication, estoppel or otherwise under any patents |
| |or trademarks of Motorola, Inc. |
| |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| | fskeleton.s |
| | |
| | This file contains: |
| | (1) example "Call-out"s |
| | (2) example package entry code |
| | (3) example "Call-out" table |
| | |
| |
| #include <linux/linkage.h> |
| |
| |################################ |
| | (1) EXAMPLE CALL-OUTS # |
| | # |
| | _060_fpsp_done() # |
| | _060_real_ovfl() # |
| | _060_real_unfl() # |
| | _060_real_operr() # |
| | _060_real_snan() # |
| | _060_real_dz() # |
| | _060_real_inex() # |
| | _060_real_bsun() # |
| | _060_real_fline() # |
| | _060_real_fpu_disabled() # |
| | _060_real_trap() # |
| |################################ |
| |
| | |
| | _060_fpsp_done(): |
| | |
| | This is the main exit point for the 68060 Floating-Point |
| | Software Package. For a normal exit, all 060FPSP routines call this |
| | routine. The operating system can do system dependent clean-up or |
| | simply execute an "rte" as with the sample code below. |
| | |
| .global _060_fpsp_done |
| _060_fpsp_done: |
| bral _060_isp_done | do the same as isp_done |
| |
| | |
| | _060_real_ovfl(): |
| | |
| | This is the exit point for the 060FPSP when an enabled overflow exception |
| | is present. The routine below should point to the operating system handler |
| | for enabled overflow conditions. The exception stack frame is an overflow |
| | stack frame. The FP state frame holds the EXCEPTIONAL OPERAND. |
| | |
| | The sample routine below simply clears the exception status bit and |
| | does an "rte". |
| | |
| .global _060_real_ovfl |
| _060_real_ovfl: |
| fsave -(%sp) |
| move.w #0x6000,0x2(%sp) |
| frestore (%sp)+ |
| bral trap | jump to trap handler |
| |
| |
| | |
| | _060_real_unfl(): |
| | |
| | This is the exit point for the 060FPSP when an enabled underflow exception |
| | is present. The routine below should point to the operating system handler |
| | for enabled underflow conditions. The exception stack frame is an underflow |
| | stack frame. The FP state frame holds the EXCEPTIONAL OPERAND. |
| | |
| | The sample routine below simply clears the exception status bit and |
| | does an "rte". |
| | |
| .global _060_real_unfl |
| _060_real_unfl: |
| fsave -(%sp) |
| move.w #0x6000,0x2(%sp) |
| frestore (%sp)+ |
| bral trap | jump to trap handler |
| |
| | |
| | _060_real_operr(): |
| | |
| | This is the exit point for the 060FPSP when an enabled operand error exception |
| | is present. The routine below should point to the operating system handler |
| | for enabled operand error exceptions. The exception stack frame is an operand error |
| | stack frame. The FP state frame holds the source operand of the faulting |
| | instruction. |
| | |
| | The sample routine below simply clears the exception status bit and |
| | does an "rte". |
| | |
| .global _060_real_operr |
| _060_real_operr: |
| fsave -(%sp) |
| move.w #0x6000,0x2(%sp) |
| frestore (%sp)+ |
| bral trap | jump to trap handler |
| |
| | |
| | _060_real_snan(): |
| | |
| | This is the exit point for the 060FPSP when an enabled signalling NaN exception |
| | is present. The routine below should point to the operating system handler |
| | for enabled signalling NaN exceptions. The exception stack frame is a signalling NaN |
| | stack frame. The FP state frame holds the source operand of the faulting |
| | instruction. |
| | |
| | The sample routine below simply clears the exception status bit and |
| | does an "rte". |
| | |
| .global _060_real_snan |
| _060_real_snan: |
| fsave -(%sp) |
| move.w #0x6000,0x2(%sp) |
| frestore (%sp)+ |
| bral trap | jump to trap handler |
| |
| | |
| | _060_real_dz(): |
| | |
| | This is the exit point for the 060FPSP when an enabled divide-by-zero exception |
| | is present. The routine below should point to the operating system handler |
| | for enabled divide-by-zero exceptions. The exception stack frame is a divide-by-zero |
| | stack frame. The FP state frame holds the source operand of the faulting |
| | instruction. |
| | |
| | The sample routine below simply clears the exception status bit and |
| | does an "rte". |
| | |
| .global _060_real_dz |
| _060_real_dz: |
| fsave -(%sp) |
| move.w #0x6000,0x2(%sp) |
| frestore (%sp)+ |
| bral trap | jump to trap handler |
| |
| | |
| | _060_real_inex(): |
| | |
| | This is the exit point for the 060FPSP when an enabled inexact exception |
| | is present. The routine below should point to the operating system handler |
| | for enabled inexact exceptions. The exception stack frame is an inexact |
| | stack frame. The FP state frame holds the source operand of the faulting |
| | instruction. |
| | |
| | The sample routine below simply clears the exception status bit and |
| | does an "rte". |
| | |
| .global _060_real_inex |
| _060_real_inex: |
| fsave -(%sp) |
| move.w #0x6000,0x2(%sp) |
| frestore (%sp)+ |
| bral trap | jump to trap handler |
| |
| | |
| | _060_real_bsun(): |
| | |
| | This is the exit point for the 060FPSP when an enabled bsun exception |
| | is present. The routine below should point to the operating system handler |
| | for enabled bsun exceptions. The exception stack frame is a bsun |
| | stack frame. |
| | |
| | The sample routine below clears the exception status bit, clears the NaN |
| | bit in the FPSR, and does an "rte". The instruction that caused the |
| | bsun will now be re-executed but with the NaN FPSR bit cleared. |
| | |
| .global _060_real_bsun |
| _060_real_bsun: |
| | fsave -(%sp) |
| |
| fmove.l %fpsr,-(%sp) |
| andi.b #0xfe,(%sp) |
| fmove.l (%sp)+,%fpsr |
| |
| bral trap | jump to trap handler |
| |
| | |
| | _060_real_fline(): |
| | |
| | This is the exit point for the 060FPSP when an F-Line Illegal exception is |
| | encountered. Three different types of exceptions can enter the F-Line exception |
| | vector number 11: FP Unimplemented Instructions, FP implemented instructions when |
| | the FPU is disabled, and F-Line Illegal instructions. The 060FPSP module |
| | _fpsp_fline() distinguishes between the three and acts appropriately. F-Line |
| | Illegals branch here. |
| | |
| .global _060_real_fline |
| _060_real_fline: |
| bral trap | jump to trap handler |
| |
| | |
| | _060_real_fpu_disabled(): |
| | |
| | This is the exit point for the 060FPSP when an FPU disabled exception is |
| | encountered. Three different types of exceptions can enter the F-Line exception |
| | vector number 11: FP Unimplemented Instructions, FP implemented instructions when |
| | the FPU is disabled, and F-Line Illegal instructions. The 060FPSP module |
| | _fpsp_fline() distinguishes between the three and acts appropriately. FPU disabled |
| | exceptions branch here. |
| | |
| | The sample code below enables the FPU, sets the PC field in the exception stack |
| | frame to the PC of the instruction causing the exception, and does an "rte". |
| | The execution of the instruction then proceeds with an enabled floating-point |
| | unit. |
| | |
| .global _060_real_fpu_disabled |
| _060_real_fpu_disabled: |
| move.l %d0,-(%sp) | enabled the fpu |
| .long 0x4E7A0808 |movec pcr,%d0 |
| bclr #0x1,%d0 |
| .long 0x4E7B0808 |movec %d0,pcr |
| move.l (%sp)+,%d0 |
| |
| move.l 0xc(%sp),0x2(%sp) | set "Current PC" |
| rte |
| |
| | |
| | _060_real_trap(): |
| | |
| | This is the exit point for the 060FPSP when an emulated "ftrapcc" instruction |
| | discovers that the trap condition is true and it should branch to the operating |
| | system handler for the trap exception vector number 7. |
| | |
| | The sample code below simply executes an "rte". |
| | |
| .global _060_real_trap |
| _060_real_trap: |
| bral trap | jump to trap handler |
| |
| |############################################################################ |
| |
| |################################# |
| | (2) EXAMPLE PACKAGE ENTRY CODE # |
| |################################# |
| |
| .global _060_fpsp_snan |
| _060_fpsp_snan: |
| bra.l _FP_CALL_TOP+0x80+0x00 |
| |
| .global _060_fpsp_operr |
| _060_fpsp_operr: |
| bra.l _FP_CALL_TOP+0x80+0x08 |
| |
| .global _060_fpsp_ovfl |
| _060_fpsp_ovfl: |
| bra.l _FP_CALL_TOP+0x80+0x10 |
| |
| .global _060_fpsp_unfl |
| _060_fpsp_unfl: |
| bra.l _FP_CALL_TOP+0x80+0x18 |
| |
| .global _060_fpsp_dz |
| _060_fpsp_dz: |
| bra.l _FP_CALL_TOP+0x80+0x20 |
| |
| .global _060_fpsp_inex |
| _060_fpsp_inex: |
| bra.l _FP_CALL_TOP+0x80+0x28 |
| |
| .global _060_fpsp_fline |
| _060_fpsp_fline: |
| bra.l _FP_CALL_TOP+0x80+0x30 |
| |
| .global _060_fpsp_unsupp |
| _060_fpsp_unsupp: |
| bra.l _FP_CALL_TOP+0x80+0x38 |
| |
| .global _060_fpsp_effadd |
| _060_fpsp_effadd: |
| bra.l _FP_CALL_TOP+0x80+0x40 |
| |
| |############################################################################ |
| |
| |############################### |
| | (3) EXAMPLE CALL-OUT SECTION # |
| |############################### |
| |
| | The size of this section MUST be 128 bytes!!! |
| |
| _FP_CALL_TOP: |
| .long _060_real_bsun - _FP_CALL_TOP |
| .long _060_real_snan - _FP_CALL_TOP |
| .long _060_real_operr - _FP_CALL_TOP |
| .long _060_real_ovfl - _FP_CALL_TOP |
| .long _060_real_unfl - _FP_CALL_TOP |
| .long _060_real_dz - _FP_CALL_TOP |
| .long _060_real_inex - _FP_CALL_TOP |
| .long _060_real_fline - _FP_CALL_TOP |
| .long _060_real_fpu_disabled - _FP_CALL_TOP |
| .long _060_real_trap - _FP_CALL_TOP |
| .long _060_real_trace - _FP_CALL_TOP |
| .long _060_real_access - _FP_CALL_TOP |
| .long _060_fpsp_done - _FP_CALL_TOP |
| |
| .long 0x00000000, 0x00000000, 0x00000000 |
| |
| .long _060_imem_read - _FP_CALL_TOP |
| .long _060_dmem_read - _FP_CALL_TOP |
| .long _060_dmem_write - _FP_CALL_TOP |
| .long _060_imem_read_word - _FP_CALL_TOP |
| .long _060_imem_read_long - _FP_CALL_TOP |
| .long _060_dmem_read_byte - _FP_CALL_TOP |
| .long _060_dmem_read_word - _FP_CALL_TOP |
| .long _060_dmem_read_long - _FP_CALL_TOP |
| .long _060_dmem_write_byte - _FP_CALL_TOP |
| .long _060_dmem_write_word - _FP_CALL_TOP |
| .long _060_dmem_write_long - _FP_CALL_TOP |
| |
| .long 0x00000000 |
| |
| .long 0x00000000, 0x00000000, 0x00000000, 0x00000000 |
| |
| |############################################################################ |
| |
| | 060 FPSP KERNEL PACKAGE NEEDS TO GO HERE!!! |
| |
| #include "fpsp.sa" |