| /* | 
 |  * HT handling | 
 |  * | 
 |  * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi> | 
 |  * Copyright 2002-2005, Instant802 Networks, Inc. | 
 |  * Copyright 2005-2006, Devicescape Software, Inc. | 
 |  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
 |  * Copyright 2007, Michael Wu <flamingice@sourmilk.net> | 
 |  * Copyright 2007-2010, Intel Corporation | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | /** | 
 |  * DOC: RX A-MPDU aggregation | 
 |  * | 
 |  * Aggregation on the RX side requires only implementing the | 
 |  * @ampdu_action callback that is invoked to start/stop any | 
 |  * block-ack sessions for RX aggregation. | 
 |  * | 
 |  * When RX aggregation is started by the peer, the driver is | 
 |  * notified via @ampdu_action function, with the | 
 |  * %IEEE80211_AMPDU_RX_START action, and may reject the request | 
 |  * in which case a negative response is sent to the peer, if it | 
 |  * accepts it a positive response is sent. | 
 |  * | 
 |  * While the session is active, the device/driver are required | 
 |  * to de-aggregate frames and pass them up one by one to mac80211, | 
 |  * which will handle the reorder buffer. | 
 |  * | 
 |  * When the aggregation session is stopped again by the peer or | 
 |  * ourselves, the driver's @ampdu_action function will be called | 
 |  * with the action %IEEE80211_AMPDU_RX_STOP. In this case, the | 
 |  * call must not fail. | 
 |  */ | 
 |  | 
 | #include <linux/ieee80211.h> | 
 | #include <linux/slab.h> | 
 | #include <net/mac80211.h> | 
 | #include "ieee80211_i.h" | 
 | #include "driver-ops.h" | 
 |  | 
 | static void ieee80211_free_tid_rx(struct rcu_head *h) | 
 | { | 
 | 	struct tid_ampdu_rx *tid_rx = | 
 | 		container_of(h, struct tid_ampdu_rx, rcu_head); | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < tid_rx->buf_size; i++) | 
 | 		dev_kfree_skb(tid_rx->reorder_buf[i]); | 
 | 	kfree(tid_rx->reorder_buf); | 
 | 	kfree(tid_rx->reorder_time); | 
 | 	kfree(tid_rx); | 
 | } | 
 |  | 
 | void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, | 
 | 				     u16 initiator, u16 reason, bool tx) | 
 | { | 
 | 	struct ieee80211_local *local = sta->local; | 
 | 	struct tid_ampdu_rx *tid_rx; | 
 |  | 
 | 	lockdep_assert_held(&sta->ampdu_mlme.mtx); | 
 |  | 
 | 	tid_rx = rcu_dereference_protected(sta->ampdu_mlme.tid_rx[tid], | 
 | 					lockdep_is_held(&sta->ampdu_mlme.mtx)); | 
 |  | 
 | 	if (!tid_rx) | 
 | 		return; | 
 |  | 
 | 	rcu_assign_pointer(sta->ampdu_mlme.tid_rx[tid], NULL); | 
 |  | 
 | #ifdef CONFIG_MAC80211_HT_DEBUG | 
 | 	printk(KERN_DEBUG "Rx BA session stop requested for %pM tid %u\n", | 
 | 	       sta->sta.addr, tid); | 
 | #endif /* CONFIG_MAC80211_HT_DEBUG */ | 
 |  | 
 | 	if (drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_STOP, | 
 | 			     &sta->sta, tid, NULL, 0)) | 
 | 		printk(KERN_DEBUG "HW problem - can not stop rx " | 
 | 				"aggregation for tid %d\n", tid); | 
 |  | 
 | 	/* check if this is a self generated aggregation halt */ | 
 | 	if (initiator == WLAN_BACK_RECIPIENT && tx) | 
 | 		ieee80211_send_delba(sta->sdata, sta->sta.addr, | 
 | 				     tid, 0, reason); | 
 |  | 
 | 	del_timer_sync(&tid_rx->session_timer); | 
 | 	del_timer_sync(&tid_rx->reorder_timer); | 
 |  | 
 | 	call_rcu(&tid_rx->rcu_head, ieee80211_free_tid_rx); | 
 | } | 
 |  | 
 | void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, | 
 | 				    u16 initiator, u16 reason, bool tx) | 
 | { | 
 | 	mutex_lock(&sta->ampdu_mlme.mtx); | 
 | 	___ieee80211_stop_rx_ba_session(sta, tid, initiator, reason, tx); | 
 | 	mutex_unlock(&sta->ampdu_mlme.mtx); | 
 | } | 
 |  | 
 | /* | 
 |  * After accepting the AddBA Request we activated a timer, | 
 |  * resetting it after each frame that arrives from the originator. | 
 |  */ | 
 | static void sta_rx_agg_session_timer_expired(unsigned long data) | 
 | { | 
 | 	/* not an elegant detour, but there is no choice as the timer passes | 
 | 	 * only one argument, and various sta_info are needed here, so init | 
 | 	 * flow in sta_info_create gives the TID as data, while the timer_to_id | 
 | 	 * array gives the sta through container_of */ | 
 | 	u8 *ptid = (u8 *)data; | 
 | 	u8 *timer_to_id = ptid - *ptid; | 
 | 	struct sta_info *sta = container_of(timer_to_id, struct sta_info, | 
 | 					 timer_to_tid[0]); | 
 |  | 
 | #ifdef CONFIG_MAC80211_HT_DEBUG | 
 | 	printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid); | 
 | #endif | 
 | 	set_bit(*ptid, sta->ampdu_mlme.tid_rx_timer_expired); | 
 | 	ieee80211_queue_work(&sta->local->hw, &sta->ampdu_mlme.work); | 
 | } | 
 |  | 
 | static void sta_rx_agg_reorder_timer_expired(unsigned long data) | 
 | { | 
 | 	u8 *ptid = (u8 *)data; | 
 | 	u8 *timer_to_id = ptid - *ptid; | 
 | 	struct sta_info *sta = container_of(timer_to_id, struct sta_info, | 
 | 			timer_to_tid[0]); | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	ieee80211_release_reorder_timeout(sta, *ptid); | 
 | 	rcu_read_unlock(); | 
 | } | 
 |  | 
 | static void ieee80211_send_addba_resp(struct ieee80211_sub_if_data *sdata, u8 *da, u16 tid, | 
 | 				      u8 dialog_token, u16 status, u16 policy, | 
 | 				      u16 buf_size, u16 timeout) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sk_buff *skb; | 
 | 	struct ieee80211_mgmt *mgmt; | 
 | 	u16 capab; | 
 |  | 
 | 	skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom); | 
 |  | 
 | 	if (!skb) { | 
 | 		printk(KERN_DEBUG "%s: failed to allocate buffer " | 
 | 		       "for addba resp frame\n", sdata->name); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 | 	mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24); | 
 | 	memset(mgmt, 0, 24); | 
 | 	memcpy(mgmt->da, da, ETH_ALEN); | 
 | 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
 | 		memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); | 
 | 	else if (sdata->vif.type == NL80211_IFTYPE_STATION) | 
 | 		memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN); | 
 |  | 
 | 	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
 | 					  IEEE80211_STYPE_ACTION); | 
 |  | 
 | 	skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_resp)); | 
 | 	mgmt->u.action.category = WLAN_CATEGORY_BACK; | 
 | 	mgmt->u.action.u.addba_resp.action_code = WLAN_ACTION_ADDBA_RESP; | 
 | 	mgmt->u.action.u.addba_resp.dialog_token = dialog_token; | 
 |  | 
 | 	capab = (u16)(policy << 1);	/* bit 1 aggregation policy */ | 
 | 	capab |= (u16)(tid << 2); 	/* bit 5:2 TID number */ | 
 | 	capab |= (u16)(buf_size << 6);	/* bit 15:6 max size of aggregation */ | 
 |  | 
 | 	mgmt->u.action.u.addba_resp.capab = cpu_to_le16(capab); | 
 | 	mgmt->u.action.u.addba_resp.timeout = cpu_to_le16(timeout); | 
 | 	mgmt->u.action.u.addba_resp.status = cpu_to_le16(status); | 
 |  | 
 | 	ieee80211_tx_skb(sdata, skb); | 
 | } | 
 |  | 
 | void ieee80211_process_addba_request(struct ieee80211_local *local, | 
 | 				     struct sta_info *sta, | 
 | 				     struct ieee80211_mgmt *mgmt, | 
 | 				     size_t len) | 
 | { | 
 | 	struct tid_ampdu_rx *tid_agg_rx; | 
 | 	u16 capab, tid, timeout, ba_policy, buf_size, start_seq_num, status; | 
 | 	u8 dialog_token; | 
 | 	int ret = -EOPNOTSUPP; | 
 |  | 
 | 	/* extract session parameters from addba request frame */ | 
 | 	dialog_token = mgmt->u.action.u.addba_req.dialog_token; | 
 | 	timeout = le16_to_cpu(mgmt->u.action.u.addba_req.timeout); | 
 | 	start_seq_num = | 
 | 		le16_to_cpu(mgmt->u.action.u.addba_req.start_seq_num) >> 4; | 
 |  | 
 | 	capab = le16_to_cpu(mgmt->u.action.u.addba_req.capab); | 
 | 	ba_policy = (capab & IEEE80211_ADDBA_PARAM_POLICY_MASK) >> 1; | 
 | 	tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2; | 
 | 	buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6; | 
 |  | 
 | 	status = WLAN_STATUS_REQUEST_DECLINED; | 
 |  | 
 | 	if (test_sta_flags(sta, WLAN_STA_BLOCK_BA)) { | 
 | #ifdef CONFIG_MAC80211_HT_DEBUG | 
 | 		printk(KERN_DEBUG "Suspend in progress. " | 
 | 		       "Denying ADDBA request\n"); | 
 | #endif | 
 | 		goto end_no_lock; | 
 | 	} | 
 |  | 
 | 	/* sanity check for incoming parameters: | 
 | 	 * check if configuration can support the BA policy | 
 | 	 * and if buffer size does not exceeds max value */ | 
 | 	/* XXX: check own ht delayed BA capability?? */ | 
 | 	if (((ba_policy != 1) && | 
 | 	     (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA))) || | 
 | 	    (buf_size > IEEE80211_MAX_AMPDU_BUF)) { | 
 | 		status = WLAN_STATUS_INVALID_QOS_PARAM; | 
 | #ifdef CONFIG_MAC80211_HT_DEBUG | 
 | 		if (net_ratelimit()) | 
 | 			printk(KERN_DEBUG "AddBA Req with bad params from " | 
 | 				"%pM on tid %u. policy %d, buffer size %d\n", | 
 | 				mgmt->sa, tid, ba_policy, | 
 | 				buf_size); | 
 | #endif /* CONFIG_MAC80211_HT_DEBUG */ | 
 | 		goto end_no_lock; | 
 | 	} | 
 | 	/* determine default buffer size */ | 
 | 	if (buf_size == 0) | 
 | 		buf_size = IEEE80211_MAX_AMPDU_BUF; | 
 |  | 
 | 	/* make sure the size doesn't exceed the maximum supported by the hw */ | 
 | 	if (buf_size > local->hw.max_rx_aggregation_subframes) | 
 | 		buf_size = local->hw.max_rx_aggregation_subframes; | 
 |  | 
 | 	/* examine state machine */ | 
 | 	mutex_lock(&sta->ampdu_mlme.mtx); | 
 |  | 
 | 	if (sta->ampdu_mlme.tid_rx[tid]) { | 
 | #ifdef CONFIG_MAC80211_HT_DEBUG | 
 | 		if (net_ratelimit()) | 
 | 			printk(KERN_DEBUG "unexpected AddBA Req from " | 
 | 				"%pM on tid %u\n", | 
 | 				mgmt->sa, tid); | 
 | #endif /* CONFIG_MAC80211_HT_DEBUG */ | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	/* prepare A-MPDU MLME for Rx aggregation */ | 
 | 	tid_agg_rx = kmalloc(sizeof(struct tid_ampdu_rx), GFP_KERNEL); | 
 | 	if (!tid_agg_rx) { | 
 | #ifdef CONFIG_MAC80211_HT_DEBUG | 
 | 		if (net_ratelimit()) | 
 | 			printk(KERN_ERR "allocate rx mlme to tid %d failed\n", | 
 | 					tid); | 
 | #endif | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	spin_lock_init(&tid_agg_rx->reorder_lock); | 
 |  | 
 | 	/* rx timer */ | 
 | 	tid_agg_rx->session_timer.function = sta_rx_agg_session_timer_expired; | 
 | 	tid_agg_rx->session_timer.data = (unsigned long)&sta->timer_to_tid[tid]; | 
 | 	init_timer(&tid_agg_rx->session_timer); | 
 |  | 
 | 	/* rx reorder timer */ | 
 | 	tid_agg_rx->reorder_timer.function = sta_rx_agg_reorder_timer_expired; | 
 | 	tid_agg_rx->reorder_timer.data = (unsigned long)&sta->timer_to_tid[tid]; | 
 | 	init_timer(&tid_agg_rx->reorder_timer); | 
 |  | 
 | 	/* prepare reordering buffer */ | 
 | 	tid_agg_rx->reorder_buf = | 
 | 		kcalloc(buf_size, sizeof(struct sk_buff *), GFP_KERNEL); | 
 | 	tid_agg_rx->reorder_time = | 
 | 		kcalloc(buf_size, sizeof(unsigned long), GFP_KERNEL); | 
 | 	if (!tid_agg_rx->reorder_buf || !tid_agg_rx->reorder_time) { | 
 | #ifdef CONFIG_MAC80211_HT_DEBUG | 
 | 		if (net_ratelimit()) | 
 | 			printk(KERN_ERR "can not allocate reordering buffer " | 
 | 			       "to tid %d\n", tid); | 
 | #endif | 
 | 		kfree(tid_agg_rx->reorder_buf); | 
 | 		kfree(tid_agg_rx->reorder_time); | 
 | 		kfree(tid_agg_rx); | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	ret = drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_START, | 
 | 			       &sta->sta, tid, &start_seq_num, 0); | 
 | #ifdef CONFIG_MAC80211_HT_DEBUG | 
 | 	printk(KERN_DEBUG "Rx A-MPDU request on tid %d result %d\n", tid, ret); | 
 | #endif /* CONFIG_MAC80211_HT_DEBUG */ | 
 |  | 
 | 	if (ret) { | 
 | 		kfree(tid_agg_rx->reorder_buf); | 
 | 		kfree(tid_agg_rx->reorder_time); | 
 | 		kfree(tid_agg_rx); | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	/* update data */ | 
 | 	tid_agg_rx->dialog_token = dialog_token; | 
 | 	tid_agg_rx->ssn = start_seq_num; | 
 | 	tid_agg_rx->head_seq_num = start_seq_num; | 
 | 	tid_agg_rx->buf_size = buf_size; | 
 | 	tid_agg_rx->timeout = timeout; | 
 | 	tid_agg_rx->stored_mpdu_num = 0; | 
 | 	status = WLAN_STATUS_SUCCESS; | 
 |  | 
 | 	/* activate it for RX */ | 
 | 	rcu_assign_pointer(sta->ampdu_mlme.tid_rx[tid], tid_agg_rx); | 
 |  | 
 | 	if (timeout) | 
 | 		mod_timer(&tid_agg_rx->session_timer, TU_TO_EXP_TIME(timeout)); | 
 |  | 
 | end: | 
 | 	mutex_unlock(&sta->ampdu_mlme.mtx); | 
 |  | 
 | end_no_lock: | 
 | 	ieee80211_send_addba_resp(sta->sdata, sta->sta.addr, tid, | 
 | 				  dialog_token, status, 1, buf_size, timeout); | 
 | } |