|  | /* | 
|  | * Device probing and sysfs code. | 
|  | * | 
|  | * Copyright (C) 2005-2006  Kristian Hoegsberg <krh@bitplanet.net> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software Foundation, | 
|  | * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | 
|  | */ | 
|  |  | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/idr.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/kobject.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/rwsem.h> | 
|  | #include <linux/semaphore.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/workqueue.h> | 
|  |  | 
|  | #include <asm/system.h> | 
|  |  | 
|  | #include "fw-device.h" | 
|  | #include "fw-topology.h" | 
|  | #include "fw-transaction.h" | 
|  |  | 
|  | void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 * p) | 
|  | { | 
|  | ci->p = p + 1; | 
|  | ci->end = ci->p + (p[0] >> 16); | 
|  | } | 
|  | EXPORT_SYMBOL(fw_csr_iterator_init); | 
|  |  | 
|  | int fw_csr_iterator_next(struct fw_csr_iterator *ci, int *key, int *value) | 
|  | { | 
|  | *key = *ci->p >> 24; | 
|  | *value = *ci->p & 0xffffff; | 
|  |  | 
|  | return ci->p++ < ci->end; | 
|  | } | 
|  | EXPORT_SYMBOL(fw_csr_iterator_next); | 
|  |  | 
|  | static int is_fw_unit(struct device *dev); | 
|  |  | 
|  | static int match_unit_directory(u32 * directory, const struct fw_device_id *id) | 
|  | { | 
|  | struct fw_csr_iterator ci; | 
|  | int key, value, match; | 
|  |  | 
|  | match = 0; | 
|  | fw_csr_iterator_init(&ci, directory); | 
|  | while (fw_csr_iterator_next(&ci, &key, &value)) { | 
|  | if (key == CSR_VENDOR && value == id->vendor) | 
|  | match |= FW_MATCH_VENDOR; | 
|  | if (key == CSR_MODEL && value == id->model) | 
|  | match |= FW_MATCH_MODEL; | 
|  | if (key == CSR_SPECIFIER_ID && value == id->specifier_id) | 
|  | match |= FW_MATCH_SPECIFIER_ID; | 
|  | if (key == CSR_VERSION && value == id->version) | 
|  | match |= FW_MATCH_VERSION; | 
|  | } | 
|  |  | 
|  | return (match & id->match_flags) == id->match_flags; | 
|  | } | 
|  |  | 
|  | static int fw_unit_match(struct device *dev, struct device_driver *drv) | 
|  | { | 
|  | struct fw_unit *unit = fw_unit(dev); | 
|  | struct fw_driver *driver = fw_driver(drv); | 
|  | int i; | 
|  |  | 
|  | /* We only allow binding to fw_units. */ | 
|  | if (!is_fw_unit(dev)) | 
|  | return 0; | 
|  |  | 
|  | for (i = 0; driver->id_table[i].match_flags != 0; i++) { | 
|  | if (match_unit_directory(unit->directory, &driver->id_table[i])) | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int get_modalias(struct fw_unit *unit, char *buffer, size_t buffer_size) | 
|  | { | 
|  | struct fw_device *device = fw_device(unit->device.parent); | 
|  | struct fw_csr_iterator ci; | 
|  |  | 
|  | int key, value; | 
|  | int vendor = 0; | 
|  | int model = 0; | 
|  | int specifier_id = 0; | 
|  | int version = 0; | 
|  |  | 
|  | fw_csr_iterator_init(&ci, &device->config_rom[5]); | 
|  | while (fw_csr_iterator_next(&ci, &key, &value)) { | 
|  | switch (key) { | 
|  | case CSR_VENDOR: | 
|  | vendor = value; | 
|  | break; | 
|  | case CSR_MODEL: | 
|  | model = value; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | fw_csr_iterator_init(&ci, unit->directory); | 
|  | while (fw_csr_iterator_next(&ci, &key, &value)) { | 
|  | switch (key) { | 
|  | case CSR_SPECIFIER_ID: | 
|  | specifier_id = value; | 
|  | break; | 
|  | case CSR_VERSION: | 
|  | version = value; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return snprintf(buffer, buffer_size, | 
|  | "ieee1394:ven%08Xmo%08Xsp%08Xver%08X", | 
|  | vendor, model, specifier_id, version); | 
|  | } | 
|  |  | 
|  | static int fw_unit_uevent(struct device *dev, struct kobj_uevent_env *env) | 
|  | { | 
|  | struct fw_unit *unit = fw_unit(dev); | 
|  | char modalias[64]; | 
|  |  | 
|  | get_modalias(unit, modalias, sizeof(modalias)); | 
|  |  | 
|  | if (add_uevent_var(env, "MODALIAS=%s", modalias)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct bus_type fw_bus_type = { | 
|  | .name = "firewire", | 
|  | .match = fw_unit_match, | 
|  | }; | 
|  | EXPORT_SYMBOL(fw_bus_type); | 
|  |  | 
|  | int fw_device_enable_phys_dma(struct fw_device *device) | 
|  | { | 
|  | int generation = device->generation; | 
|  |  | 
|  | /* device->node_id, accessed below, must not be older than generation */ | 
|  | smp_rmb(); | 
|  |  | 
|  | return device->card->driver->enable_phys_dma(device->card, | 
|  | device->node_id, | 
|  | generation); | 
|  | } | 
|  | EXPORT_SYMBOL(fw_device_enable_phys_dma); | 
|  |  | 
|  | struct config_rom_attribute { | 
|  | struct device_attribute attr; | 
|  | u32 key; | 
|  | }; | 
|  |  | 
|  | static ssize_t show_immediate(struct device *dev, | 
|  | struct device_attribute *dattr, char *buf) | 
|  | { | 
|  | struct config_rom_attribute *attr = | 
|  | container_of(dattr, struct config_rom_attribute, attr); | 
|  | struct fw_csr_iterator ci; | 
|  | u32 *dir; | 
|  | int key, value, ret = -ENOENT; | 
|  |  | 
|  | down_read(&fw_device_rwsem); | 
|  |  | 
|  | if (is_fw_unit(dev)) | 
|  | dir = fw_unit(dev)->directory; | 
|  | else | 
|  | dir = fw_device(dev)->config_rom + 5; | 
|  |  | 
|  | fw_csr_iterator_init(&ci, dir); | 
|  | while (fw_csr_iterator_next(&ci, &key, &value)) | 
|  | if (attr->key == key) { | 
|  | ret = snprintf(buf, buf ? PAGE_SIZE : 0, | 
|  | "0x%06x\n", value); | 
|  | break; | 
|  | } | 
|  |  | 
|  | up_read(&fw_device_rwsem); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #define IMMEDIATE_ATTR(name, key)				\ | 
|  | { __ATTR(name, S_IRUGO, show_immediate, NULL), key } | 
|  |  | 
|  | static ssize_t show_text_leaf(struct device *dev, | 
|  | struct device_attribute *dattr, char *buf) | 
|  | { | 
|  | struct config_rom_attribute *attr = | 
|  | container_of(dattr, struct config_rom_attribute, attr); | 
|  | struct fw_csr_iterator ci; | 
|  | u32 *dir, *block = NULL, *p, *end; | 
|  | int length, key, value, last_key = 0, ret = -ENOENT; | 
|  | char *b; | 
|  |  | 
|  | down_read(&fw_device_rwsem); | 
|  |  | 
|  | if (is_fw_unit(dev)) | 
|  | dir = fw_unit(dev)->directory; | 
|  | else | 
|  | dir = fw_device(dev)->config_rom + 5; | 
|  |  | 
|  | fw_csr_iterator_init(&ci, dir); | 
|  | while (fw_csr_iterator_next(&ci, &key, &value)) { | 
|  | if (attr->key == last_key && | 
|  | key == (CSR_DESCRIPTOR | CSR_LEAF)) | 
|  | block = ci.p - 1 + value; | 
|  | last_key = key; | 
|  | } | 
|  |  | 
|  | if (block == NULL) | 
|  | goto out; | 
|  |  | 
|  | length = min(block[0] >> 16, 256U); | 
|  | if (length < 3) | 
|  | goto out; | 
|  |  | 
|  | if (block[1] != 0 || block[2] != 0) | 
|  | /* Unknown encoding. */ | 
|  | goto out; | 
|  |  | 
|  | if (buf == NULL) { | 
|  | ret = length * 4; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | b = buf; | 
|  | end = &block[length + 1]; | 
|  | for (p = &block[3]; p < end; p++, b += 4) | 
|  | * (u32 *) b = (__force u32) __cpu_to_be32(*p); | 
|  |  | 
|  | /* Strip trailing whitespace and add newline. */ | 
|  | while (b--, (isspace(*b) || *b == '\0') && b > buf); | 
|  | strcpy(b + 1, "\n"); | 
|  | ret = b + 2 - buf; | 
|  | out: | 
|  | up_read(&fw_device_rwsem); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #define TEXT_LEAF_ATTR(name, key)				\ | 
|  | { __ATTR(name, S_IRUGO, show_text_leaf, NULL), key } | 
|  |  | 
|  | static struct config_rom_attribute config_rom_attributes[] = { | 
|  | IMMEDIATE_ATTR(vendor, CSR_VENDOR), | 
|  | IMMEDIATE_ATTR(hardware_version, CSR_HARDWARE_VERSION), | 
|  | IMMEDIATE_ATTR(specifier_id, CSR_SPECIFIER_ID), | 
|  | IMMEDIATE_ATTR(version, CSR_VERSION), | 
|  | IMMEDIATE_ATTR(model, CSR_MODEL), | 
|  | TEXT_LEAF_ATTR(vendor_name, CSR_VENDOR), | 
|  | TEXT_LEAF_ATTR(model_name, CSR_MODEL), | 
|  | TEXT_LEAF_ATTR(hardware_version_name, CSR_HARDWARE_VERSION), | 
|  | }; | 
|  |  | 
|  | static void init_fw_attribute_group(struct device *dev, | 
|  | struct device_attribute *attrs, | 
|  | struct fw_attribute_group *group) | 
|  | { | 
|  | struct device_attribute *attr; | 
|  | int i, j; | 
|  |  | 
|  | for (j = 0; attrs[j].attr.name != NULL; j++) | 
|  | group->attrs[j] = &attrs[j].attr; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(config_rom_attributes); i++) { | 
|  | attr = &config_rom_attributes[i].attr; | 
|  | if (attr->show(dev, attr, NULL) < 0) | 
|  | continue; | 
|  | group->attrs[j++] = &attr->attr; | 
|  | } | 
|  |  | 
|  | BUG_ON(j >= ARRAY_SIZE(group->attrs)); | 
|  | group->attrs[j++] = NULL; | 
|  | group->groups[0] = &group->group; | 
|  | group->groups[1] = NULL; | 
|  | group->group.attrs = group->attrs; | 
|  | dev->groups = group->groups; | 
|  | } | 
|  |  | 
|  | static ssize_t modalias_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct fw_unit *unit = fw_unit(dev); | 
|  | int length; | 
|  |  | 
|  | length = get_modalias(unit, buf, PAGE_SIZE); | 
|  | strcpy(buf + length, "\n"); | 
|  |  | 
|  | return length + 1; | 
|  | } | 
|  |  | 
|  | static ssize_t rom_index_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct fw_device *device = fw_device(dev->parent); | 
|  | struct fw_unit *unit = fw_unit(dev); | 
|  |  | 
|  | return snprintf(buf, PAGE_SIZE, "%d\n", | 
|  | (int)(unit->directory - device->config_rom)); | 
|  | } | 
|  |  | 
|  | static struct device_attribute fw_unit_attributes[] = { | 
|  | __ATTR_RO(modalias), | 
|  | __ATTR_RO(rom_index), | 
|  | __ATTR_NULL, | 
|  | }; | 
|  |  | 
|  | static ssize_t config_rom_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct fw_device *device = fw_device(dev); | 
|  | size_t length; | 
|  |  | 
|  | down_read(&fw_device_rwsem); | 
|  | length = device->config_rom_length * 4; | 
|  | memcpy(buf, device->config_rom, length); | 
|  | up_read(&fw_device_rwsem); | 
|  |  | 
|  | return length; | 
|  | } | 
|  |  | 
|  | static ssize_t guid_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct fw_device *device = fw_device(dev); | 
|  | int ret; | 
|  |  | 
|  | down_read(&fw_device_rwsem); | 
|  | ret = snprintf(buf, PAGE_SIZE, "0x%08x%08x\n", | 
|  | device->config_rom[3], device->config_rom[4]); | 
|  | up_read(&fw_device_rwsem); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct device_attribute fw_device_attributes[] = { | 
|  | __ATTR_RO(config_rom), | 
|  | __ATTR_RO(guid), | 
|  | __ATTR_NULL, | 
|  | }; | 
|  |  | 
|  | static int read_rom(struct fw_device *device, | 
|  | int generation, int index, u32 *data) | 
|  | { | 
|  | int rcode; | 
|  |  | 
|  | /* device->node_id, accessed below, must not be older than generation */ | 
|  | smp_rmb(); | 
|  |  | 
|  | rcode = fw_run_transaction(device->card, TCODE_READ_QUADLET_REQUEST, | 
|  | device->node_id, generation, device->max_speed, | 
|  | (CSR_REGISTER_BASE | CSR_CONFIG_ROM) + index * 4, | 
|  | data, 4); | 
|  | be32_to_cpus(data); | 
|  |  | 
|  | return rcode; | 
|  | } | 
|  |  | 
|  | #define READ_BIB_ROM_SIZE	256 | 
|  | #define READ_BIB_STACK_SIZE	16 | 
|  |  | 
|  | /* | 
|  | * Read the bus info block, perform a speed probe, and read all of the rest of | 
|  | * the config ROM.  We do all this with a cached bus generation.  If the bus | 
|  | * generation changes under us, read_bus_info_block will fail and get retried. | 
|  | * It's better to start all over in this case because the node from which we | 
|  | * are reading the ROM may have changed the ROM during the reset. | 
|  | */ | 
|  | static int read_bus_info_block(struct fw_device *device, int generation) | 
|  | { | 
|  | u32 *rom, *stack, *old_rom, *new_rom; | 
|  | u32 sp, key; | 
|  | int i, end, length, ret = -1; | 
|  |  | 
|  | rom = kmalloc(sizeof(*rom) * READ_BIB_ROM_SIZE + | 
|  | sizeof(*stack) * READ_BIB_STACK_SIZE, GFP_KERNEL); | 
|  | if (rom == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | stack = &rom[READ_BIB_ROM_SIZE]; | 
|  |  | 
|  | device->max_speed = SCODE_100; | 
|  |  | 
|  | /* First read the bus info block. */ | 
|  | for (i = 0; i < 5; i++) { | 
|  | if (read_rom(device, generation, i, &rom[i]) != RCODE_COMPLETE) | 
|  | goto out; | 
|  | /* | 
|  | * As per IEEE1212 7.2, during power-up, devices can | 
|  | * reply with a 0 for the first quadlet of the config | 
|  | * rom to indicate that they are booting (for example, | 
|  | * if the firmware is on the disk of a external | 
|  | * harddisk).  In that case we just fail, and the | 
|  | * retry mechanism will try again later. | 
|  | */ | 
|  | if (i == 0 && rom[i] == 0) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | device->max_speed = device->node->max_speed; | 
|  |  | 
|  | /* | 
|  | * Determine the speed of | 
|  | *   - devices with link speed less than PHY speed, | 
|  | *   - devices with 1394b PHY (unless only connected to 1394a PHYs), | 
|  | *   - all devices if there are 1394b repeaters. | 
|  | * Note, we cannot use the bus info block's link_spd as starting point | 
|  | * because some buggy firmwares set it lower than necessary and because | 
|  | * 1394-1995 nodes do not have the field. | 
|  | */ | 
|  | if ((rom[2] & 0x7) < device->max_speed || | 
|  | device->max_speed == SCODE_BETA || | 
|  | device->card->beta_repeaters_present) { | 
|  | u32 dummy; | 
|  |  | 
|  | /* for S1600 and S3200 */ | 
|  | if (device->max_speed == SCODE_BETA) | 
|  | device->max_speed = device->card->link_speed; | 
|  |  | 
|  | while (device->max_speed > SCODE_100) { | 
|  | if (read_rom(device, generation, 0, &dummy) == | 
|  | RCODE_COMPLETE) | 
|  | break; | 
|  | device->max_speed--; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Now parse the config rom.  The config rom is a recursive | 
|  | * directory structure so we parse it using a stack of | 
|  | * references to the blocks that make up the structure.  We | 
|  | * push a reference to the root directory on the stack to | 
|  | * start things off. | 
|  | */ | 
|  | length = i; | 
|  | sp = 0; | 
|  | stack[sp++] = 0xc0000005; | 
|  | while (sp > 0) { | 
|  | /* | 
|  | * Pop the next block reference of the stack.  The | 
|  | * lower 24 bits is the offset into the config rom, | 
|  | * the upper 8 bits are the type of the reference the | 
|  | * block. | 
|  | */ | 
|  | key = stack[--sp]; | 
|  | i = key & 0xffffff; | 
|  | if (i >= READ_BIB_ROM_SIZE) | 
|  | /* | 
|  | * The reference points outside the standard | 
|  | * config rom area, something's fishy. | 
|  | */ | 
|  | goto out; | 
|  |  | 
|  | /* Read header quadlet for the block to get the length. */ | 
|  | if (read_rom(device, generation, i, &rom[i]) != RCODE_COMPLETE) | 
|  | goto out; | 
|  | end = i + (rom[i] >> 16) + 1; | 
|  | i++; | 
|  | if (end > READ_BIB_ROM_SIZE) | 
|  | /* | 
|  | * This block extends outside standard config | 
|  | * area (and the array we're reading it | 
|  | * into).  That's broken, so ignore this | 
|  | * device. | 
|  | */ | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * Now read in the block.  If this is a directory | 
|  | * block, check the entries as we read them to see if | 
|  | * it references another block, and push it in that case. | 
|  | */ | 
|  | while (i < end) { | 
|  | if (read_rom(device, generation, i, &rom[i]) != | 
|  | RCODE_COMPLETE) | 
|  | goto out; | 
|  | if ((key >> 30) == 3 && (rom[i] >> 30) > 1 && | 
|  | sp < READ_BIB_STACK_SIZE) | 
|  | stack[sp++] = i + rom[i]; | 
|  | i++; | 
|  | } | 
|  | if (length < i) | 
|  | length = i; | 
|  | } | 
|  |  | 
|  | old_rom = device->config_rom; | 
|  | new_rom = kmemdup(rom, length * 4, GFP_KERNEL); | 
|  | if (new_rom == NULL) | 
|  | goto out; | 
|  |  | 
|  | down_write(&fw_device_rwsem); | 
|  | device->config_rom = new_rom; | 
|  | device->config_rom_length = length; | 
|  | up_write(&fw_device_rwsem); | 
|  |  | 
|  | kfree(old_rom); | 
|  | ret = 0; | 
|  | device->cmc = rom[2] >> 30 & 1; | 
|  | out: | 
|  | kfree(rom); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void fw_unit_release(struct device *dev) | 
|  | { | 
|  | struct fw_unit *unit = fw_unit(dev); | 
|  |  | 
|  | kfree(unit); | 
|  | } | 
|  |  | 
|  | static struct device_type fw_unit_type = { | 
|  | .uevent		= fw_unit_uevent, | 
|  | .release	= fw_unit_release, | 
|  | }; | 
|  |  | 
|  | static int is_fw_unit(struct device *dev) | 
|  | { | 
|  | return dev->type == &fw_unit_type; | 
|  | } | 
|  |  | 
|  | static void create_units(struct fw_device *device) | 
|  | { | 
|  | struct fw_csr_iterator ci; | 
|  | struct fw_unit *unit; | 
|  | int key, value, i; | 
|  |  | 
|  | i = 0; | 
|  | fw_csr_iterator_init(&ci, &device->config_rom[5]); | 
|  | while (fw_csr_iterator_next(&ci, &key, &value)) { | 
|  | if (key != (CSR_UNIT | CSR_DIRECTORY)) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * Get the address of the unit directory and try to | 
|  | * match the drivers id_tables against it. | 
|  | */ | 
|  | unit = kzalloc(sizeof(*unit), GFP_KERNEL); | 
|  | if (unit == NULL) { | 
|  | fw_error("failed to allocate memory for unit\n"); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | unit->directory = ci.p + value - 1; | 
|  | unit->device.bus = &fw_bus_type; | 
|  | unit->device.type = &fw_unit_type; | 
|  | unit->device.parent = &device->device; | 
|  | dev_set_name(&unit->device, "%s.%d", dev_name(&device->device), i++); | 
|  |  | 
|  | init_fw_attribute_group(&unit->device, | 
|  | fw_unit_attributes, | 
|  | &unit->attribute_group); | 
|  | if (device_register(&unit->device) < 0) | 
|  | goto skip_unit; | 
|  |  | 
|  | continue; | 
|  |  | 
|  | skip_unit: | 
|  | kfree(unit); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int shutdown_unit(struct device *device, void *data) | 
|  | { | 
|  | device_unregister(device); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * fw_device_rwsem acts as dual purpose mutex: | 
|  | *   - serializes accesses to fw_device_idr, | 
|  | *   - serializes accesses to fw_device.config_rom/.config_rom_length and | 
|  | *     fw_unit.directory, unless those accesses happen at safe occasions | 
|  | */ | 
|  | DECLARE_RWSEM(fw_device_rwsem); | 
|  |  | 
|  | DEFINE_IDR(fw_device_idr); | 
|  | int fw_cdev_major; | 
|  |  | 
|  | struct fw_device *fw_device_get_by_devt(dev_t devt) | 
|  | { | 
|  | struct fw_device *device; | 
|  |  | 
|  | down_read(&fw_device_rwsem); | 
|  | device = idr_find(&fw_device_idr, MINOR(devt)); | 
|  | if (device) | 
|  | fw_device_get(device); | 
|  | up_read(&fw_device_rwsem); | 
|  |  | 
|  | return device; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * These defines control the retry behavior for reading the config | 
|  | * rom.  It shouldn't be necessary to tweak these; if the device | 
|  | * doesn't respond to a config rom read within 10 seconds, it's not | 
|  | * going to respond at all.  As for the initial delay, a lot of | 
|  | * devices will be able to respond within half a second after bus | 
|  | * reset.  On the other hand, it's not really worth being more | 
|  | * aggressive than that, since it scales pretty well; if 10 devices | 
|  | * are plugged in, they're all getting read within one second. | 
|  | */ | 
|  |  | 
|  | #define MAX_RETRIES	10 | 
|  | #define RETRY_DELAY	(3 * HZ) | 
|  | #define INITIAL_DELAY	(HZ / 2) | 
|  | #define SHUTDOWN_DELAY	(2 * HZ) | 
|  |  | 
|  | static void fw_device_shutdown(struct work_struct *work) | 
|  | { | 
|  | struct fw_device *device = | 
|  | container_of(work, struct fw_device, work.work); | 
|  | int minor = MINOR(device->device.devt); | 
|  |  | 
|  | if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY) | 
|  | && !list_empty(&device->card->link)) { | 
|  | schedule_delayed_work(&device->work, SHUTDOWN_DELAY); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (atomic_cmpxchg(&device->state, | 
|  | FW_DEVICE_GONE, | 
|  | FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE) | 
|  | return; | 
|  |  | 
|  | fw_device_cdev_remove(device); | 
|  | device_for_each_child(&device->device, NULL, shutdown_unit); | 
|  | device_unregister(&device->device); | 
|  |  | 
|  | down_write(&fw_device_rwsem); | 
|  | idr_remove(&fw_device_idr, minor); | 
|  | up_write(&fw_device_rwsem); | 
|  |  | 
|  | fw_device_put(device); | 
|  | } | 
|  |  | 
|  | static void fw_device_release(struct device *dev) | 
|  | { | 
|  | struct fw_device *device = fw_device(dev); | 
|  | struct fw_card *card = device->card; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* | 
|  | * Take the card lock so we don't set this to NULL while a | 
|  | * FW_NODE_UPDATED callback is being handled or while the | 
|  | * bus manager work looks at this node. | 
|  | */ | 
|  | spin_lock_irqsave(&card->lock, flags); | 
|  | device->node->data = NULL; | 
|  | spin_unlock_irqrestore(&card->lock, flags); | 
|  |  | 
|  | fw_node_put(device->node); | 
|  | kfree(device->config_rom); | 
|  | kfree(device); | 
|  | fw_card_put(card); | 
|  | } | 
|  |  | 
|  | static struct device_type fw_device_type = { | 
|  | .release = fw_device_release, | 
|  | }; | 
|  |  | 
|  | static int update_unit(struct device *dev, void *data) | 
|  | { | 
|  | struct fw_unit *unit = fw_unit(dev); | 
|  | struct fw_driver *driver = (struct fw_driver *)dev->driver; | 
|  |  | 
|  | if (is_fw_unit(dev) && driver != NULL && driver->update != NULL) { | 
|  | down(&dev->sem); | 
|  | driver->update(unit); | 
|  | up(&dev->sem); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void fw_device_update(struct work_struct *work) | 
|  | { | 
|  | struct fw_device *device = | 
|  | container_of(work, struct fw_device, work.work); | 
|  |  | 
|  | fw_device_cdev_update(device); | 
|  | device_for_each_child(&device->device, NULL, update_unit); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If a device was pending for deletion because its node went away but its | 
|  | * bus info block and root directory header matches that of a newly discovered | 
|  | * device, revive the existing fw_device. | 
|  | * The newly allocated fw_device becomes obsolete instead. | 
|  | */ | 
|  | static int lookup_existing_device(struct device *dev, void *data) | 
|  | { | 
|  | struct fw_device *old = fw_device(dev); | 
|  | struct fw_device *new = data; | 
|  | struct fw_card *card = new->card; | 
|  | int match = 0; | 
|  |  | 
|  | down_read(&fw_device_rwsem); /* serialize config_rom access */ | 
|  | spin_lock_irq(&card->lock);  /* serialize node access */ | 
|  |  | 
|  | if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 && | 
|  | atomic_cmpxchg(&old->state, | 
|  | FW_DEVICE_GONE, | 
|  | FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { | 
|  | struct fw_node *current_node = new->node; | 
|  | struct fw_node *obsolete_node = old->node; | 
|  |  | 
|  | new->node = obsolete_node; | 
|  | new->node->data = new; | 
|  | old->node = current_node; | 
|  | old->node->data = old; | 
|  |  | 
|  | old->max_speed = new->max_speed; | 
|  | old->node_id = current_node->node_id; | 
|  | smp_wmb();  /* update node_id before generation */ | 
|  | old->generation = card->generation; | 
|  | old->config_rom_retries = 0; | 
|  | fw_notify("rediscovered device %s\n", dev_name(dev)); | 
|  |  | 
|  | PREPARE_DELAYED_WORK(&old->work, fw_device_update); | 
|  | schedule_delayed_work(&old->work, 0); | 
|  |  | 
|  | if (current_node == card->root_node) | 
|  | fw_schedule_bm_work(card, 0); | 
|  |  | 
|  | match = 1; | 
|  | } | 
|  |  | 
|  | spin_unlock_irq(&card->lock); | 
|  | up_read(&fw_device_rwsem); | 
|  |  | 
|  | return match; | 
|  | } | 
|  |  | 
|  | enum { BC_UNKNOWN = 0, BC_UNIMPLEMENTED, BC_IMPLEMENTED, }; | 
|  |  | 
|  | void fw_device_set_broadcast_channel(struct fw_device *device, int generation) | 
|  | { | 
|  | struct fw_card *card = device->card; | 
|  | __be32 data; | 
|  | int rcode; | 
|  |  | 
|  | if (!card->broadcast_channel_allocated) | 
|  | return; | 
|  |  | 
|  | if (device->bc_implemented == BC_UNKNOWN) { | 
|  | rcode = fw_run_transaction(card, TCODE_READ_QUADLET_REQUEST, | 
|  | device->node_id, generation, device->max_speed, | 
|  | CSR_REGISTER_BASE + CSR_BROADCAST_CHANNEL, | 
|  | &data, 4); | 
|  | switch (rcode) { | 
|  | case RCODE_COMPLETE: | 
|  | if (data & cpu_to_be32(1 << 31)) { | 
|  | device->bc_implemented = BC_IMPLEMENTED; | 
|  | break; | 
|  | } | 
|  | /* else fall through to case address error */ | 
|  | case RCODE_ADDRESS_ERROR: | 
|  | device->bc_implemented = BC_UNIMPLEMENTED; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (device->bc_implemented == BC_IMPLEMENTED) { | 
|  | data = cpu_to_be32(BROADCAST_CHANNEL_INITIAL | | 
|  | BROADCAST_CHANNEL_VALID); | 
|  | fw_run_transaction(card, TCODE_WRITE_QUADLET_REQUEST, | 
|  | device->node_id, generation, device->max_speed, | 
|  | CSR_REGISTER_BASE + CSR_BROADCAST_CHANNEL, | 
|  | &data, 4); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void fw_device_init(struct work_struct *work) | 
|  | { | 
|  | struct fw_device *device = | 
|  | container_of(work, struct fw_device, work.work); | 
|  | struct device *revived_dev; | 
|  | int minor, ret; | 
|  |  | 
|  | /* | 
|  | * All failure paths here set node->data to NULL, so that we | 
|  | * don't try to do device_for_each_child() on a kfree()'d | 
|  | * device. | 
|  | */ | 
|  |  | 
|  | if (read_bus_info_block(device, device->generation) < 0) { | 
|  | if (device->config_rom_retries < MAX_RETRIES && | 
|  | atomic_read(&device->state) == FW_DEVICE_INITIALIZING) { | 
|  | device->config_rom_retries++; | 
|  | schedule_delayed_work(&device->work, RETRY_DELAY); | 
|  | } else { | 
|  | fw_notify("giving up on config rom for node id %x\n", | 
|  | device->node_id); | 
|  | if (device->node == device->card->root_node) | 
|  | fw_schedule_bm_work(device->card, 0); | 
|  | fw_device_release(&device->device); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | revived_dev = device_find_child(device->card->device, | 
|  | device, lookup_existing_device); | 
|  | if (revived_dev) { | 
|  | put_device(revived_dev); | 
|  | fw_device_release(&device->device); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | device_initialize(&device->device); | 
|  |  | 
|  | fw_device_get(device); | 
|  | down_write(&fw_device_rwsem); | 
|  | ret = idr_pre_get(&fw_device_idr, GFP_KERNEL) ? | 
|  | idr_get_new(&fw_device_idr, device, &minor) : | 
|  | -ENOMEM; | 
|  | up_write(&fw_device_rwsem); | 
|  |  | 
|  | if (ret < 0) | 
|  | goto error; | 
|  |  | 
|  | device->device.bus = &fw_bus_type; | 
|  | device->device.type = &fw_device_type; | 
|  | device->device.parent = device->card->device; | 
|  | device->device.devt = MKDEV(fw_cdev_major, minor); | 
|  | dev_set_name(&device->device, "fw%d", minor); | 
|  |  | 
|  | init_fw_attribute_group(&device->device, | 
|  | fw_device_attributes, | 
|  | &device->attribute_group); | 
|  | if (device_add(&device->device)) { | 
|  | fw_error("Failed to add device.\n"); | 
|  | goto error_with_cdev; | 
|  | } | 
|  |  | 
|  | create_units(device); | 
|  |  | 
|  | /* | 
|  | * Transition the device to running state.  If it got pulled | 
|  | * out from under us while we did the intialization work, we | 
|  | * have to shut down the device again here.  Normally, though, | 
|  | * fw_node_event will be responsible for shutting it down when | 
|  | * necessary.  We have to use the atomic cmpxchg here to avoid | 
|  | * racing with the FW_NODE_DESTROYED case in | 
|  | * fw_node_event(). | 
|  | */ | 
|  | if (atomic_cmpxchg(&device->state, | 
|  | FW_DEVICE_INITIALIZING, | 
|  | FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { | 
|  | PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); | 
|  | schedule_delayed_work(&device->work, SHUTDOWN_DELAY); | 
|  | } else { | 
|  | if (device->config_rom_retries) | 
|  | fw_notify("created device %s: GUID %08x%08x, S%d00, " | 
|  | "%d config ROM retries\n", | 
|  | dev_name(&device->device), | 
|  | device->config_rom[3], device->config_rom[4], | 
|  | 1 << device->max_speed, | 
|  | device->config_rom_retries); | 
|  | else | 
|  | fw_notify("created device %s: GUID %08x%08x, S%d00\n", | 
|  | dev_name(&device->device), | 
|  | device->config_rom[3], device->config_rom[4], | 
|  | 1 << device->max_speed); | 
|  | device->config_rom_retries = 0; | 
|  |  | 
|  | fw_device_set_broadcast_channel(device, device->generation); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reschedule the IRM work if we just finished reading the | 
|  | * root node config rom.  If this races with a bus reset we | 
|  | * just end up running the IRM work a couple of extra times - | 
|  | * pretty harmless. | 
|  | */ | 
|  | if (device->node == device->card->root_node) | 
|  | fw_schedule_bm_work(device->card, 0); | 
|  |  | 
|  | return; | 
|  |  | 
|  | error_with_cdev: | 
|  | down_write(&fw_device_rwsem); | 
|  | idr_remove(&fw_device_idr, minor); | 
|  | up_write(&fw_device_rwsem); | 
|  | error: | 
|  | fw_device_put(device);		/* fw_device_idr's reference */ | 
|  |  | 
|  | put_device(&device->device);	/* our reference */ | 
|  | } | 
|  |  | 
|  | enum { | 
|  | REREAD_BIB_ERROR, | 
|  | REREAD_BIB_GONE, | 
|  | REREAD_BIB_UNCHANGED, | 
|  | REREAD_BIB_CHANGED, | 
|  | }; | 
|  |  | 
|  | /* Reread and compare bus info block and header of root directory */ | 
|  | static int reread_bus_info_block(struct fw_device *device, int generation) | 
|  | { | 
|  | u32 q; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < 6; i++) { | 
|  | if (read_rom(device, generation, i, &q) != RCODE_COMPLETE) | 
|  | return REREAD_BIB_ERROR; | 
|  |  | 
|  | if (i == 0 && q == 0) | 
|  | return REREAD_BIB_GONE; | 
|  |  | 
|  | if (q != device->config_rom[i]) | 
|  | return REREAD_BIB_CHANGED; | 
|  | } | 
|  |  | 
|  | return REREAD_BIB_UNCHANGED; | 
|  | } | 
|  |  | 
|  | static void fw_device_refresh(struct work_struct *work) | 
|  | { | 
|  | struct fw_device *device = | 
|  | container_of(work, struct fw_device, work.work); | 
|  | struct fw_card *card = device->card; | 
|  | int node_id = device->node_id; | 
|  |  | 
|  | switch (reread_bus_info_block(device, device->generation)) { | 
|  | case REREAD_BIB_ERROR: | 
|  | if (device->config_rom_retries < MAX_RETRIES / 2 && | 
|  | atomic_read(&device->state) == FW_DEVICE_INITIALIZING) { | 
|  | device->config_rom_retries++; | 
|  | schedule_delayed_work(&device->work, RETRY_DELAY / 2); | 
|  |  | 
|  | return; | 
|  | } | 
|  | goto give_up; | 
|  |  | 
|  | case REREAD_BIB_GONE: | 
|  | goto gone; | 
|  |  | 
|  | case REREAD_BIB_UNCHANGED: | 
|  | if (atomic_cmpxchg(&device->state, | 
|  | FW_DEVICE_INITIALIZING, | 
|  | FW_DEVICE_RUNNING) == FW_DEVICE_GONE) | 
|  | goto gone; | 
|  |  | 
|  | fw_device_update(work); | 
|  | device->config_rom_retries = 0; | 
|  | goto out; | 
|  |  | 
|  | case REREAD_BIB_CHANGED: | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Something changed.  We keep things simple and don't investigate | 
|  | * further.  We just destroy all previous units and create new ones. | 
|  | */ | 
|  | device_for_each_child(&device->device, NULL, shutdown_unit); | 
|  |  | 
|  | if (read_bus_info_block(device, device->generation) < 0) { | 
|  | if (device->config_rom_retries < MAX_RETRIES && | 
|  | atomic_read(&device->state) == FW_DEVICE_INITIALIZING) { | 
|  | device->config_rom_retries++; | 
|  | schedule_delayed_work(&device->work, RETRY_DELAY); | 
|  |  | 
|  | return; | 
|  | } | 
|  | goto give_up; | 
|  | } | 
|  |  | 
|  | create_units(device); | 
|  |  | 
|  | if (atomic_cmpxchg(&device->state, | 
|  | FW_DEVICE_INITIALIZING, | 
|  | FW_DEVICE_RUNNING) == FW_DEVICE_GONE) | 
|  | goto gone; | 
|  |  | 
|  | fw_notify("refreshed device %s\n", dev_name(&device->device)); | 
|  | device->config_rom_retries = 0; | 
|  | goto out; | 
|  |  | 
|  | give_up: | 
|  | fw_notify("giving up on refresh of device %s\n", dev_name(&device->device)); | 
|  | gone: | 
|  | atomic_set(&device->state, FW_DEVICE_GONE); | 
|  | PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); | 
|  | schedule_delayed_work(&device->work, SHUTDOWN_DELAY); | 
|  | out: | 
|  | if (node_id == card->root_node->node_id) | 
|  | fw_schedule_bm_work(card, 0); | 
|  | } | 
|  |  | 
|  | void fw_node_event(struct fw_card *card, struct fw_node *node, int event) | 
|  | { | 
|  | struct fw_device *device; | 
|  |  | 
|  | switch (event) { | 
|  | case FW_NODE_CREATED: | 
|  | case FW_NODE_LINK_ON: | 
|  | if (!node->link_on) | 
|  | break; | 
|  | create: | 
|  | device = kzalloc(sizeof(*device), GFP_ATOMIC); | 
|  | if (device == NULL) | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * Do minimal intialization of the device here, the | 
|  | * rest will happen in fw_device_init(). | 
|  | * | 
|  | * Attention:  A lot of things, even fw_device_get(), | 
|  | * cannot be done before fw_device_init() finished! | 
|  | * You can basically just check device->state and | 
|  | * schedule work until then, but only while holding | 
|  | * card->lock. | 
|  | */ | 
|  | atomic_set(&device->state, FW_DEVICE_INITIALIZING); | 
|  | device->card = fw_card_get(card); | 
|  | device->node = fw_node_get(node); | 
|  | device->node_id = node->node_id; | 
|  | device->generation = card->generation; | 
|  | mutex_init(&device->client_list_mutex); | 
|  | INIT_LIST_HEAD(&device->client_list); | 
|  |  | 
|  | /* | 
|  | * Set the node data to point back to this device so | 
|  | * FW_NODE_UPDATED callbacks can update the node_id | 
|  | * and generation for the device. | 
|  | */ | 
|  | node->data = device; | 
|  |  | 
|  | /* | 
|  | * Many devices are slow to respond after bus resets, | 
|  | * especially if they are bus powered and go through | 
|  | * power-up after getting plugged in.  We schedule the | 
|  | * first config rom scan half a second after bus reset. | 
|  | */ | 
|  | INIT_DELAYED_WORK(&device->work, fw_device_init); | 
|  | schedule_delayed_work(&device->work, INITIAL_DELAY); | 
|  | break; | 
|  |  | 
|  | case FW_NODE_INITIATED_RESET: | 
|  | device = node->data; | 
|  | if (device == NULL) | 
|  | goto create; | 
|  |  | 
|  | device->node_id = node->node_id; | 
|  | smp_wmb();  /* update node_id before generation */ | 
|  | device->generation = card->generation; | 
|  | if (atomic_cmpxchg(&device->state, | 
|  | FW_DEVICE_RUNNING, | 
|  | FW_DEVICE_INITIALIZING) == FW_DEVICE_RUNNING) { | 
|  | PREPARE_DELAYED_WORK(&device->work, fw_device_refresh); | 
|  | schedule_delayed_work(&device->work, | 
|  | node == card->local_node ? 0 : INITIAL_DELAY); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FW_NODE_UPDATED: | 
|  | if (!node->link_on || node->data == NULL) | 
|  | break; | 
|  |  | 
|  | device = node->data; | 
|  | device->node_id = node->node_id; | 
|  | smp_wmb();  /* update node_id before generation */ | 
|  | device->generation = card->generation; | 
|  | if (atomic_read(&device->state) == FW_DEVICE_RUNNING) { | 
|  | PREPARE_DELAYED_WORK(&device->work, fw_device_update); | 
|  | schedule_delayed_work(&device->work, 0); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FW_NODE_DESTROYED: | 
|  | case FW_NODE_LINK_OFF: | 
|  | if (!node->data) | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * Destroy the device associated with the node.  There | 
|  | * are two cases here: either the device is fully | 
|  | * initialized (FW_DEVICE_RUNNING) or we're in the | 
|  | * process of reading its config rom | 
|  | * (FW_DEVICE_INITIALIZING).  If it is fully | 
|  | * initialized we can reuse device->work to schedule a | 
|  | * full fw_device_shutdown().  If not, there's work | 
|  | * scheduled to read it's config rom, and we just put | 
|  | * the device in shutdown state to have that code fail | 
|  | * to create the device. | 
|  | */ | 
|  | device = node->data; | 
|  | if (atomic_xchg(&device->state, | 
|  | FW_DEVICE_GONE) == FW_DEVICE_RUNNING) { | 
|  | PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); | 
|  | schedule_delayed_work(&device->work, | 
|  | list_empty(&card->link) ? 0 : SHUTDOWN_DELAY); | 
|  | } | 
|  | break; | 
|  | } | 
|  | } |