|  | /* | 
|  | * Serial Attached SCSI (SAS) Expander discovery and configuration | 
|  | * | 
|  | * Copyright (C) 2005 Adaptec, Inc.  All rights reserved. | 
|  | * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> | 
|  | * | 
|  | * This file is licensed under GPLv2. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of the | 
|  | * License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/scatterlist.h> | 
|  | #include <linux/blkdev.h> | 
|  |  | 
|  | #include "sas_internal.h" | 
|  |  | 
|  | #include <scsi/scsi_transport.h> | 
|  | #include <scsi/scsi_transport_sas.h> | 
|  | #include "../scsi_sas_internal.h" | 
|  |  | 
|  | static int sas_discover_expander(struct domain_device *dev); | 
|  | static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr); | 
|  | static int sas_configure_phy(struct domain_device *dev, int phy_id, | 
|  | u8 *sas_addr, int include); | 
|  | static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr); | 
|  |  | 
|  | /* ---------- SMP task management ---------- */ | 
|  |  | 
|  | static void smp_task_timedout(unsigned long _task) | 
|  | { | 
|  | struct sas_task *task = (void *) _task; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&task->task_state_lock, flags); | 
|  | if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) | 
|  | task->task_state_flags |= SAS_TASK_STATE_ABORTED; | 
|  | spin_unlock_irqrestore(&task->task_state_lock, flags); | 
|  |  | 
|  | complete(&task->completion); | 
|  | } | 
|  |  | 
|  | static void smp_task_done(struct sas_task *task) | 
|  | { | 
|  | if (!del_timer(&task->timer)) | 
|  | return; | 
|  | complete(&task->completion); | 
|  | } | 
|  |  | 
|  | /* Give it some long enough timeout. In seconds. */ | 
|  | #define SMP_TIMEOUT 10 | 
|  |  | 
|  | static int smp_execute_task(struct domain_device *dev, void *req, int req_size, | 
|  | void *resp, int resp_size) | 
|  | { | 
|  | int res, retry; | 
|  | struct sas_task *task = NULL; | 
|  | struct sas_internal *i = | 
|  | to_sas_internal(dev->port->ha->core.shost->transportt); | 
|  |  | 
|  | for (retry = 0; retry < 3; retry++) { | 
|  | task = sas_alloc_task(GFP_KERNEL); | 
|  | if (!task) | 
|  | return -ENOMEM; | 
|  |  | 
|  | task->dev = dev; | 
|  | task->task_proto = dev->tproto; | 
|  | sg_init_one(&task->smp_task.smp_req, req, req_size); | 
|  | sg_init_one(&task->smp_task.smp_resp, resp, resp_size); | 
|  |  | 
|  | task->task_done = smp_task_done; | 
|  |  | 
|  | task->timer.data = (unsigned long) task; | 
|  | task->timer.function = smp_task_timedout; | 
|  | task->timer.expires = jiffies + SMP_TIMEOUT*HZ; | 
|  | add_timer(&task->timer); | 
|  |  | 
|  | res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL); | 
|  |  | 
|  | if (res) { | 
|  | del_timer(&task->timer); | 
|  | SAS_DPRINTK("executing SMP task failed:%d\n", res); | 
|  | goto ex_err; | 
|  | } | 
|  |  | 
|  | wait_for_completion(&task->completion); | 
|  | res = -ECOMM; | 
|  | if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { | 
|  | SAS_DPRINTK("smp task timed out or aborted\n"); | 
|  | i->dft->lldd_abort_task(task); | 
|  | if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { | 
|  | SAS_DPRINTK("SMP task aborted and not done\n"); | 
|  | goto ex_err; | 
|  | } | 
|  | } | 
|  | if (task->task_status.resp == SAS_TASK_COMPLETE && | 
|  | task->task_status.stat == SAM_GOOD) { | 
|  | res = 0; | 
|  | break; | 
|  | } if (task->task_status.resp == SAS_TASK_COMPLETE && | 
|  | task->task_status.stat == SAS_DATA_UNDERRUN) { | 
|  | /* no error, but return the number of bytes of | 
|  | * underrun */ | 
|  | res = task->task_status.residual; | 
|  | break; | 
|  | } if (task->task_status.resp == SAS_TASK_COMPLETE && | 
|  | task->task_status.stat == SAS_DATA_OVERRUN) { | 
|  | res = -EMSGSIZE; | 
|  | break; | 
|  | } else { | 
|  | SAS_DPRINTK("%s: task to dev %016llx response: 0x%x " | 
|  | "status 0x%x\n", __func__, | 
|  | SAS_ADDR(dev->sas_addr), | 
|  | task->task_status.resp, | 
|  | task->task_status.stat); | 
|  | sas_free_task(task); | 
|  | task = NULL; | 
|  | } | 
|  | } | 
|  | ex_err: | 
|  | BUG_ON(retry == 3 && task != NULL); | 
|  | if (task != NULL) { | 
|  | sas_free_task(task); | 
|  | } | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /* ---------- Allocations ---------- */ | 
|  |  | 
|  | static inline void *alloc_smp_req(int size) | 
|  | { | 
|  | u8 *p = kzalloc(size, GFP_KERNEL); | 
|  | if (p) | 
|  | p[0] = SMP_REQUEST; | 
|  | return p; | 
|  | } | 
|  |  | 
|  | static inline void *alloc_smp_resp(int size) | 
|  | { | 
|  | return kzalloc(size, GFP_KERNEL); | 
|  | } | 
|  |  | 
|  | /* ---------- Expander configuration ---------- */ | 
|  |  | 
|  | static void sas_set_ex_phy(struct domain_device *dev, int phy_id, | 
|  | void *disc_resp) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | struct ex_phy *phy = &ex->ex_phy[phy_id]; | 
|  | struct smp_resp *resp = disc_resp; | 
|  | struct discover_resp *dr = &resp->disc; | 
|  | struct sas_rphy *rphy = dev->rphy; | 
|  | int rediscover = (phy->phy != NULL); | 
|  |  | 
|  | if (!rediscover) { | 
|  | phy->phy = sas_phy_alloc(&rphy->dev, phy_id); | 
|  |  | 
|  | /* FIXME: error_handling */ | 
|  | BUG_ON(!phy->phy); | 
|  | } | 
|  |  | 
|  | switch (resp->result) { | 
|  | case SMP_RESP_PHY_VACANT: | 
|  | phy->phy_state = PHY_VACANT; | 
|  | return; | 
|  | default: | 
|  | phy->phy_state = PHY_NOT_PRESENT; | 
|  | return; | 
|  | case SMP_RESP_FUNC_ACC: | 
|  | phy->phy_state = PHY_EMPTY; /* do not know yet */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | phy->phy_id = phy_id; | 
|  | phy->attached_dev_type = dr->attached_dev_type; | 
|  | phy->linkrate = dr->linkrate; | 
|  | phy->attached_sata_host = dr->attached_sata_host; | 
|  | phy->attached_sata_dev  = dr->attached_sata_dev; | 
|  | phy->attached_sata_ps   = dr->attached_sata_ps; | 
|  | phy->attached_iproto = dr->iproto << 1; | 
|  | phy->attached_tproto = dr->tproto << 1; | 
|  | memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE); | 
|  | phy->attached_phy_id = dr->attached_phy_id; | 
|  | phy->phy_change_count = dr->change_count; | 
|  | phy->routing_attr = dr->routing_attr; | 
|  | phy->virtual = dr->virtual; | 
|  | phy->last_da_index = -1; | 
|  |  | 
|  | phy->phy->identify.initiator_port_protocols = phy->attached_iproto; | 
|  | phy->phy->identify.target_port_protocols = phy->attached_tproto; | 
|  | phy->phy->identify.phy_identifier = phy_id; | 
|  | phy->phy->minimum_linkrate_hw = dr->hmin_linkrate; | 
|  | phy->phy->maximum_linkrate_hw = dr->hmax_linkrate; | 
|  | phy->phy->minimum_linkrate = dr->pmin_linkrate; | 
|  | phy->phy->maximum_linkrate = dr->pmax_linkrate; | 
|  | phy->phy->negotiated_linkrate = phy->linkrate; | 
|  |  | 
|  | if (!rediscover) | 
|  | sas_phy_add(phy->phy); | 
|  |  | 
|  | SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n", | 
|  | SAS_ADDR(dev->sas_addr), phy->phy_id, | 
|  | phy->routing_attr == TABLE_ROUTING ? 'T' : | 
|  | phy->routing_attr == DIRECT_ROUTING ? 'D' : | 
|  | phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?', | 
|  | SAS_ADDR(phy->attached_sas_addr)); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | #define DISCOVER_REQ_SIZE  16 | 
|  | #define DISCOVER_RESP_SIZE 56 | 
|  |  | 
|  | static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req, | 
|  | u8 *disc_resp, int single) | 
|  | { | 
|  | int i, res; | 
|  |  | 
|  | disc_req[9] = single; | 
|  | for (i = 1 ; i < 3; i++) { | 
|  | struct discover_resp *dr; | 
|  |  | 
|  | res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, | 
|  | disc_resp, DISCOVER_RESP_SIZE); | 
|  | if (res) | 
|  | return res; | 
|  | /* This is detecting a failure to transmit inital | 
|  | * dev to host FIS as described in section G.5 of | 
|  | * sas-2 r 04b */ | 
|  | dr = &((struct smp_resp *)disc_resp)->disc; | 
|  | if (!(dr->attached_dev_type == 0 && | 
|  | dr->attached_sata_dev)) | 
|  | break; | 
|  | /* In order to generate the dev to host FIS, we | 
|  | * send a link reset to the expander port */ | 
|  | sas_smp_phy_control(dev, single, PHY_FUNC_LINK_RESET, NULL); | 
|  | /* Wait for the reset to trigger the negotiation */ | 
|  | msleep(500); | 
|  | } | 
|  | sas_set_ex_phy(dev, single, disc_resp); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sas_ex_phy_discover(struct domain_device *dev, int single) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | int  res = 0; | 
|  | u8   *disc_req; | 
|  | u8   *disc_resp; | 
|  |  | 
|  | disc_req = alloc_smp_req(DISCOVER_REQ_SIZE); | 
|  | if (!disc_req) | 
|  | return -ENOMEM; | 
|  |  | 
|  | disc_resp = alloc_smp_req(DISCOVER_RESP_SIZE); | 
|  | if (!disc_resp) { | 
|  | kfree(disc_req); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | disc_req[1] = SMP_DISCOVER; | 
|  |  | 
|  | if (0 <= single && single < ex->num_phys) { | 
|  | res = sas_ex_phy_discover_helper(dev, disc_req, disc_resp, single); | 
|  | } else { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ex->num_phys; i++) { | 
|  | res = sas_ex_phy_discover_helper(dev, disc_req, | 
|  | disc_resp, i); | 
|  | if (res) | 
|  | goto out_err; | 
|  | } | 
|  | } | 
|  | out_err: | 
|  | kfree(disc_resp); | 
|  | kfree(disc_req); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_expander_discover(struct domain_device *dev) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | int res = -ENOMEM; | 
|  |  | 
|  | ex->ex_phy = kzalloc(sizeof(*ex->ex_phy)*ex->num_phys, GFP_KERNEL); | 
|  | if (!ex->ex_phy) | 
|  | return -ENOMEM; | 
|  |  | 
|  | res = sas_ex_phy_discover(dev, -1); | 
|  | if (res) | 
|  | goto out_err; | 
|  |  | 
|  | return 0; | 
|  | out_err: | 
|  | kfree(ex->ex_phy); | 
|  | ex->ex_phy = NULL; | 
|  | return res; | 
|  | } | 
|  |  | 
|  | #define MAX_EXPANDER_PHYS 128 | 
|  |  | 
|  | static void ex_assign_report_general(struct domain_device *dev, | 
|  | struct smp_resp *resp) | 
|  | { | 
|  | struct report_general_resp *rg = &resp->rg; | 
|  |  | 
|  | dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count); | 
|  | dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes); | 
|  | dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS); | 
|  | dev->ex_dev.conf_route_table = rg->conf_route_table; | 
|  | dev->ex_dev.configuring = rg->configuring; | 
|  | memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8); | 
|  | } | 
|  |  | 
|  | #define RG_REQ_SIZE   8 | 
|  | #define RG_RESP_SIZE 32 | 
|  |  | 
|  | static int sas_ex_general(struct domain_device *dev) | 
|  | { | 
|  | u8 *rg_req; | 
|  | struct smp_resp *rg_resp; | 
|  | int res; | 
|  | int i; | 
|  |  | 
|  | rg_req = alloc_smp_req(RG_REQ_SIZE); | 
|  | if (!rg_req) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rg_resp = alloc_smp_resp(RG_RESP_SIZE); | 
|  | if (!rg_resp) { | 
|  | kfree(rg_req); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | rg_req[1] = SMP_REPORT_GENERAL; | 
|  |  | 
|  | for (i = 0; i < 5; i++) { | 
|  | res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp, | 
|  | RG_RESP_SIZE); | 
|  |  | 
|  | if (res) { | 
|  | SAS_DPRINTK("RG to ex %016llx failed:0x%x\n", | 
|  | SAS_ADDR(dev->sas_addr), res); | 
|  | goto out; | 
|  | } else if (rg_resp->result != SMP_RESP_FUNC_ACC) { | 
|  | SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n", | 
|  | SAS_ADDR(dev->sas_addr), rg_resp->result); | 
|  | res = rg_resp->result; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ex_assign_report_general(dev, rg_resp); | 
|  |  | 
|  | if (dev->ex_dev.configuring) { | 
|  | SAS_DPRINTK("RG: ex %llx self-configuring...\n", | 
|  | SAS_ADDR(dev->sas_addr)); | 
|  | schedule_timeout_interruptible(5*HZ); | 
|  | } else | 
|  | break; | 
|  | } | 
|  | out: | 
|  | kfree(rg_req); | 
|  | kfree(rg_resp); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static void ex_assign_manuf_info(struct domain_device *dev, void | 
|  | *_mi_resp) | 
|  | { | 
|  | u8 *mi_resp = _mi_resp; | 
|  | struct sas_rphy *rphy = dev->rphy; | 
|  | struct sas_expander_device *edev = rphy_to_expander_device(rphy); | 
|  |  | 
|  | memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN); | 
|  | memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN); | 
|  | memcpy(edev->product_rev, mi_resp + 36, | 
|  | SAS_EXPANDER_PRODUCT_REV_LEN); | 
|  |  | 
|  | if (mi_resp[8] & 1) { | 
|  | memcpy(edev->component_vendor_id, mi_resp + 40, | 
|  | SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); | 
|  | edev->component_id = mi_resp[48] << 8 | mi_resp[49]; | 
|  | edev->component_revision_id = mi_resp[50]; | 
|  | } | 
|  | } | 
|  |  | 
|  | #define MI_REQ_SIZE   8 | 
|  | #define MI_RESP_SIZE 64 | 
|  |  | 
|  | static int sas_ex_manuf_info(struct domain_device *dev) | 
|  | { | 
|  | u8 *mi_req; | 
|  | u8 *mi_resp; | 
|  | int res; | 
|  |  | 
|  | mi_req = alloc_smp_req(MI_REQ_SIZE); | 
|  | if (!mi_req) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mi_resp = alloc_smp_resp(MI_RESP_SIZE); | 
|  | if (!mi_resp) { | 
|  | kfree(mi_req); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | mi_req[1] = SMP_REPORT_MANUF_INFO; | 
|  |  | 
|  | res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE); | 
|  | if (res) { | 
|  | SAS_DPRINTK("MI: ex %016llx failed:0x%x\n", | 
|  | SAS_ADDR(dev->sas_addr), res); | 
|  | goto out; | 
|  | } else if (mi_resp[2] != SMP_RESP_FUNC_ACC) { | 
|  | SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n", | 
|  | SAS_ADDR(dev->sas_addr), mi_resp[2]); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ex_assign_manuf_info(dev, mi_resp); | 
|  | out: | 
|  | kfree(mi_req); | 
|  | kfree(mi_resp); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | #define PC_REQ_SIZE  44 | 
|  | #define PC_RESP_SIZE 8 | 
|  |  | 
|  | int sas_smp_phy_control(struct domain_device *dev, int phy_id, | 
|  | enum phy_func phy_func, | 
|  | struct sas_phy_linkrates *rates) | 
|  | { | 
|  | u8 *pc_req; | 
|  | u8 *pc_resp; | 
|  | int res; | 
|  |  | 
|  | pc_req = alloc_smp_req(PC_REQ_SIZE); | 
|  | if (!pc_req) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pc_resp = alloc_smp_resp(PC_RESP_SIZE); | 
|  | if (!pc_resp) { | 
|  | kfree(pc_req); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | pc_req[1] = SMP_PHY_CONTROL; | 
|  | pc_req[9] = phy_id; | 
|  | pc_req[10]= phy_func; | 
|  | if (rates) { | 
|  | pc_req[32] = rates->minimum_linkrate << 4; | 
|  | pc_req[33] = rates->maximum_linkrate << 4; | 
|  | } | 
|  |  | 
|  | res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE); | 
|  |  | 
|  | kfree(pc_resp); | 
|  | kfree(pc_req); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static void sas_ex_disable_phy(struct domain_device *dev, int phy_id) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | struct ex_phy *phy = &ex->ex_phy[phy_id]; | 
|  |  | 
|  | sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL); | 
|  | phy->linkrate = SAS_PHY_DISABLED; | 
|  | } | 
|  |  | 
|  | static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ex->num_phys; i++) { | 
|  | struct ex_phy *phy = &ex->ex_phy[i]; | 
|  |  | 
|  | if (phy->phy_state == PHY_VACANT || | 
|  | phy->phy_state == PHY_NOT_PRESENT) | 
|  | continue; | 
|  |  | 
|  | if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr)) | 
|  | sas_ex_disable_phy(dev, i); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int sas_dev_present_in_domain(struct asd_sas_port *port, | 
|  | u8 *sas_addr) | 
|  | { | 
|  | struct domain_device *dev; | 
|  |  | 
|  | if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr)) | 
|  | return 1; | 
|  | list_for_each_entry(dev, &port->dev_list, dev_list_node) { | 
|  | if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr)) | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define RPEL_REQ_SIZE	16 | 
|  | #define RPEL_RESP_SIZE	32 | 
|  | int sas_smp_get_phy_events(struct sas_phy *phy) | 
|  | { | 
|  | int res; | 
|  | u8 *req; | 
|  | u8 *resp; | 
|  | struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent); | 
|  | struct domain_device *dev = sas_find_dev_by_rphy(rphy); | 
|  |  | 
|  | req = alloc_smp_req(RPEL_REQ_SIZE); | 
|  | if (!req) | 
|  | return -ENOMEM; | 
|  |  | 
|  | resp = alloc_smp_resp(RPEL_RESP_SIZE); | 
|  | if (!resp) { | 
|  | kfree(req); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | req[1] = SMP_REPORT_PHY_ERR_LOG; | 
|  | req[9] = phy->number; | 
|  |  | 
|  | res = smp_execute_task(dev, req, RPEL_REQ_SIZE, | 
|  | resp, RPEL_RESP_SIZE); | 
|  |  | 
|  | if (!res) | 
|  | goto out; | 
|  |  | 
|  | phy->invalid_dword_count = scsi_to_u32(&resp[12]); | 
|  | phy->running_disparity_error_count = scsi_to_u32(&resp[16]); | 
|  | phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]); | 
|  | phy->phy_reset_problem_count = scsi_to_u32(&resp[24]); | 
|  |  | 
|  | out: | 
|  | kfree(resp); | 
|  | return res; | 
|  |  | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SCSI_SAS_ATA | 
|  |  | 
|  | #define RPS_REQ_SIZE  16 | 
|  | #define RPS_RESP_SIZE 60 | 
|  |  | 
|  | static int sas_get_report_phy_sata(struct domain_device *dev, | 
|  | int phy_id, | 
|  | struct smp_resp *rps_resp) | 
|  | { | 
|  | int res; | 
|  | u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE); | 
|  | u8 *resp = (u8 *)rps_resp; | 
|  |  | 
|  | if (!rps_req) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rps_req[1] = SMP_REPORT_PHY_SATA; | 
|  | rps_req[9] = phy_id; | 
|  |  | 
|  | res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE, | 
|  | rps_resp, RPS_RESP_SIZE); | 
|  |  | 
|  | /* 0x34 is the FIS type for the D2H fis.  There's a potential | 
|  | * standards cockup here.  sas-2 explicitly specifies the FIS | 
|  | * should be encoded so that FIS type is in resp[24]. | 
|  | * However, some expanders endian reverse this.  Undo the | 
|  | * reversal here */ | 
|  | if (!res && resp[27] == 0x34 && resp[24] != 0x34) { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < 5; i++) { | 
|  | int j = 24 + (i*4); | 
|  | u8 a, b; | 
|  | a = resp[j + 0]; | 
|  | b = resp[j + 1]; | 
|  | resp[j + 0] = resp[j + 3]; | 
|  | resp[j + 1] = resp[j + 2]; | 
|  | resp[j + 2] = b; | 
|  | resp[j + 3] = a; | 
|  | } | 
|  | } | 
|  |  | 
|  | kfree(rps_req); | 
|  | return res; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void sas_ex_get_linkrate(struct domain_device *parent, | 
|  | struct domain_device *child, | 
|  | struct ex_phy *parent_phy) | 
|  | { | 
|  | struct expander_device *parent_ex = &parent->ex_dev; | 
|  | struct sas_port *port; | 
|  | int i; | 
|  |  | 
|  | child->pathways = 0; | 
|  |  | 
|  | port = parent_phy->port; | 
|  |  | 
|  | for (i = 0; i < parent_ex->num_phys; i++) { | 
|  | struct ex_phy *phy = &parent_ex->ex_phy[i]; | 
|  |  | 
|  | if (phy->phy_state == PHY_VACANT || | 
|  | phy->phy_state == PHY_NOT_PRESENT) | 
|  | continue; | 
|  |  | 
|  | if (SAS_ADDR(phy->attached_sas_addr) == | 
|  | SAS_ADDR(child->sas_addr)) { | 
|  |  | 
|  | child->min_linkrate = min(parent->min_linkrate, | 
|  | phy->linkrate); | 
|  | child->max_linkrate = max(parent->max_linkrate, | 
|  | phy->linkrate); | 
|  | child->pathways++; | 
|  | sas_port_add_phy(port, phy->phy); | 
|  | } | 
|  | } | 
|  | child->linkrate = min(parent_phy->linkrate, child->max_linkrate); | 
|  | child->pathways = min(child->pathways, parent->pathways); | 
|  | } | 
|  |  | 
|  | static struct domain_device *sas_ex_discover_end_dev( | 
|  | struct domain_device *parent, int phy_id) | 
|  | { | 
|  | struct expander_device *parent_ex = &parent->ex_dev; | 
|  | struct ex_phy *phy = &parent_ex->ex_phy[phy_id]; | 
|  | struct domain_device *child = NULL; | 
|  | struct sas_rphy *rphy; | 
|  | int res; | 
|  |  | 
|  | if (phy->attached_sata_host || phy->attached_sata_ps) | 
|  | return NULL; | 
|  |  | 
|  | child = kzalloc(sizeof(*child), GFP_KERNEL); | 
|  | if (!child) | 
|  | return NULL; | 
|  |  | 
|  | child->parent = parent; | 
|  | child->port   = parent->port; | 
|  | child->iproto = phy->attached_iproto; | 
|  | memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); | 
|  | sas_hash_addr(child->hashed_sas_addr, child->sas_addr); | 
|  | if (!phy->port) { | 
|  | phy->port = sas_port_alloc(&parent->rphy->dev, phy_id); | 
|  | if (unlikely(!phy->port)) | 
|  | goto out_err; | 
|  | if (unlikely(sas_port_add(phy->port) != 0)) { | 
|  | sas_port_free(phy->port); | 
|  | goto out_err; | 
|  | } | 
|  | } | 
|  | sas_ex_get_linkrate(parent, child, phy); | 
|  |  | 
|  | #ifdef CONFIG_SCSI_SAS_ATA | 
|  | if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) { | 
|  | child->dev_type = SATA_DEV; | 
|  | if (phy->attached_tproto & SAS_PROTOCOL_STP) | 
|  | child->tproto = phy->attached_tproto; | 
|  | if (phy->attached_sata_dev) | 
|  | child->tproto |= SATA_DEV; | 
|  | res = sas_get_report_phy_sata(parent, phy_id, | 
|  | &child->sata_dev.rps_resp); | 
|  | if (res) { | 
|  | SAS_DPRINTK("report phy sata to %016llx:0x%x returned " | 
|  | "0x%x\n", SAS_ADDR(parent->sas_addr), | 
|  | phy_id, res); | 
|  | goto out_free; | 
|  | } | 
|  | memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis, | 
|  | sizeof(struct dev_to_host_fis)); | 
|  |  | 
|  | rphy = sas_end_device_alloc(phy->port); | 
|  | if (unlikely(!rphy)) | 
|  | goto out_free; | 
|  |  | 
|  | sas_init_dev(child); | 
|  |  | 
|  | child->rphy = rphy; | 
|  |  | 
|  | spin_lock_irq(&parent->port->dev_list_lock); | 
|  | list_add_tail(&child->dev_list_node, &parent->port->dev_list); | 
|  | spin_unlock_irq(&parent->port->dev_list_lock); | 
|  |  | 
|  | res = sas_discover_sata(child); | 
|  | if (res) { | 
|  | SAS_DPRINTK("sas_discover_sata() for device %16llx at " | 
|  | "%016llx:0x%x returned 0x%x\n", | 
|  | SAS_ADDR(child->sas_addr), | 
|  | SAS_ADDR(parent->sas_addr), phy_id, res); | 
|  | goto out_list_del; | 
|  | } | 
|  | } else | 
|  | #endif | 
|  | if (phy->attached_tproto & SAS_PROTOCOL_SSP) { | 
|  | child->dev_type = SAS_END_DEV; | 
|  | rphy = sas_end_device_alloc(phy->port); | 
|  | /* FIXME: error handling */ | 
|  | if (unlikely(!rphy)) | 
|  | goto out_free; | 
|  | child->tproto = phy->attached_tproto; | 
|  | sas_init_dev(child); | 
|  |  | 
|  | child->rphy = rphy; | 
|  | sas_fill_in_rphy(child, rphy); | 
|  |  | 
|  | spin_lock_irq(&parent->port->dev_list_lock); | 
|  | list_add_tail(&child->dev_list_node, &parent->port->dev_list); | 
|  | spin_unlock_irq(&parent->port->dev_list_lock); | 
|  |  | 
|  | res = sas_discover_end_dev(child); | 
|  | if (res) { | 
|  | SAS_DPRINTK("sas_discover_end_dev() for device %16llx " | 
|  | "at %016llx:0x%x returned 0x%x\n", | 
|  | SAS_ADDR(child->sas_addr), | 
|  | SAS_ADDR(parent->sas_addr), phy_id, res); | 
|  | goto out_list_del; | 
|  | } | 
|  | } else { | 
|  | SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n", | 
|  | phy->attached_tproto, SAS_ADDR(parent->sas_addr), | 
|  | phy_id); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | list_add_tail(&child->siblings, &parent_ex->children); | 
|  | return child; | 
|  |  | 
|  | out_list_del: | 
|  | sas_rphy_free(child->rphy); | 
|  | child->rphy = NULL; | 
|  | list_del(&child->dev_list_node); | 
|  | out_free: | 
|  | sas_port_delete(phy->port); | 
|  | out_err: | 
|  | phy->port = NULL; | 
|  | kfree(child); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* See if this phy is part of a wide port */ | 
|  | static int sas_ex_join_wide_port(struct domain_device *parent, int phy_id) | 
|  | { | 
|  | struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id]; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < parent->ex_dev.num_phys; i++) { | 
|  | struct ex_phy *ephy = &parent->ex_dev.ex_phy[i]; | 
|  |  | 
|  | if (ephy == phy) | 
|  | continue; | 
|  |  | 
|  | if (!memcmp(phy->attached_sas_addr, ephy->attached_sas_addr, | 
|  | SAS_ADDR_SIZE) && ephy->port) { | 
|  | sas_port_add_phy(ephy->port, phy->phy); | 
|  | phy->phy_state = PHY_DEVICE_DISCOVERED; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static struct domain_device *sas_ex_discover_expander( | 
|  | struct domain_device *parent, int phy_id) | 
|  | { | 
|  | struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy); | 
|  | struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id]; | 
|  | struct domain_device *child = NULL; | 
|  | struct sas_rphy *rphy; | 
|  | struct sas_expander_device *edev; | 
|  | struct asd_sas_port *port; | 
|  | int res; | 
|  |  | 
|  | if (phy->routing_attr == DIRECT_ROUTING) { | 
|  | SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not " | 
|  | "allowed\n", | 
|  | SAS_ADDR(parent->sas_addr), phy_id, | 
|  | SAS_ADDR(phy->attached_sas_addr), | 
|  | phy->attached_phy_id); | 
|  | return NULL; | 
|  | } | 
|  | child = kzalloc(sizeof(*child), GFP_KERNEL); | 
|  | if (!child) | 
|  | return NULL; | 
|  |  | 
|  | phy->port = sas_port_alloc(&parent->rphy->dev, phy_id); | 
|  | /* FIXME: better error handling */ | 
|  | BUG_ON(sas_port_add(phy->port) != 0); | 
|  |  | 
|  |  | 
|  | switch (phy->attached_dev_type) { | 
|  | case EDGE_DEV: | 
|  | rphy = sas_expander_alloc(phy->port, | 
|  | SAS_EDGE_EXPANDER_DEVICE); | 
|  | break; | 
|  | case FANOUT_DEV: | 
|  | rphy = sas_expander_alloc(phy->port, | 
|  | SAS_FANOUT_EXPANDER_DEVICE); | 
|  | break; | 
|  | default: | 
|  | rphy = NULL;	/* shut gcc up */ | 
|  | BUG(); | 
|  | } | 
|  | port = parent->port; | 
|  | child->rphy = rphy; | 
|  | edev = rphy_to_expander_device(rphy); | 
|  | child->dev_type = phy->attached_dev_type; | 
|  | child->parent = parent; | 
|  | child->port = port; | 
|  | child->iproto = phy->attached_iproto; | 
|  | child->tproto = phy->attached_tproto; | 
|  | memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); | 
|  | sas_hash_addr(child->hashed_sas_addr, child->sas_addr); | 
|  | sas_ex_get_linkrate(parent, child, phy); | 
|  | edev->level = parent_ex->level + 1; | 
|  | parent->port->disc.max_level = max(parent->port->disc.max_level, | 
|  | edev->level); | 
|  | sas_init_dev(child); | 
|  | sas_fill_in_rphy(child, rphy); | 
|  | sas_rphy_add(rphy); | 
|  |  | 
|  | spin_lock_irq(&parent->port->dev_list_lock); | 
|  | list_add_tail(&child->dev_list_node, &parent->port->dev_list); | 
|  | spin_unlock_irq(&parent->port->dev_list_lock); | 
|  |  | 
|  | res = sas_discover_expander(child); | 
|  | if (res) { | 
|  | kfree(child); | 
|  | return NULL; | 
|  | } | 
|  | list_add_tail(&child->siblings, &parent->ex_dev.children); | 
|  | return child; | 
|  | } | 
|  |  | 
|  | static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | struct ex_phy *ex_phy = &ex->ex_phy[phy_id]; | 
|  | struct domain_device *child = NULL; | 
|  | int res = 0; | 
|  |  | 
|  | /* Phy state */ | 
|  | if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) { | 
|  | if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL)) | 
|  | res = sas_ex_phy_discover(dev, phy_id); | 
|  | if (res) | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /* Parent and domain coherency */ | 
|  | if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) == | 
|  | SAS_ADDR(dev->port->sas_addr))) { | 
|  | sas_add_parent_port(dev, phy_id); | 
|  | return 0; | 
|  | } | 
|  | if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) == | 
|  | SAS_ADDR(dev->parent->sas_addr))) { | 
|  | sas_add_parent_port(dev, phy_id); | 
|  | if (ex_phy->routing_attr == TABLE_ROUTING) | 
|  | sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr)) | 
|  | sas_ex_disable_port(dev, ex_phy->attached_sas_addr); | 
|  |  | 
|  | if (ex_phy->attached_dev_type == NO_DEVICE) { | 
|  | if (ex_phy->routing_attr == DIRECT_ROUTING) { | 
|  | memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE); | 
|  | sas_configure_routing(dev, ex_phy->attached_sas_addr); | 
|  | } | 
|  | return 0; | 
|  | } else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN) | 
|  | return 0; | 
|  |  | 
|  | if (ex_phy->attached_dev_type != SAS_END_DEV && | 
|  | ex_phy->attached_dev_type != FANOUT_DEV && | 
|  | ex_phy->attached_dev_type != EDGE_DEV) { | 
|  | SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx " | 
|  | "phy 0x%x\n", ex_phy->attached_dev_type, | 
|  | SAS_ADDR(dev->sas_addr), | 
|  | phy_id); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | res = sas_configure_routing(dev, ex_phy->attached_sas_addr); | 
|  | if (res) { | 
|  | SAS_DPRINTK("configure routing for dev %016llx " | 
|  | "reported 0x%x. Forgotten\n", | 
|  | SAS_ADDR(ex_phy->attached_sas_addr), res); | 
|  | sas_disable_routing(dev, ex_phy->attached_sas_addr); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | res = sas_ex_join_wide_port(dev, phy_id); | 
|  | if (!res) { | 
|  | SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n", | 
|  | phy_id, SAS_ADDR(ex_phy->attached_sas_addr)); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | switch (ex_phy->attached_dev_type) { | 
|  | case SAS_END_DEV: | 
|  | child = sas_ex_discover_end_dev(dev, phy_id); | 
|  | break; | 
|  | case FANOUT_DEV: | 
|  | if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) { | 
|  | SAS_DPRINTK("second fanout expander %016llx phy 0x%x " | 
|  | "attached to ex %016llx phy 0x%x\n", | 
|  | SAS_ADDR(ex_phy->attached_sas_addr), | 
|  | ex_phy->attached_phy_id, | 
|  | SAS_ADDR(dev->sas_addr), | 
|  | phy_id); | 
|  | sas_ex_disable_phy(dev, phy_id); | 
|  | break; | 
|  | } else | 
|  | memcpy(dev->port->disc.fanout_sas_addr, | 
|  | ex_phy->attached_sas_addr, SAS_ADDR_SIZE); | 
|  | /* fallthrough */ | 
|  | case EDGE_DEV: | 
|  | child = sas_ex_discover_expander(dev, phy_id); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (child) { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ex->num_phys; i++) { | 
|  | if (ex->ex_phy[i].phy_state == PHY_VACANT || | 
|  | ex->ex_phy[i].phy_state == PHY_NOT_PRESENT) | 
|  | continue; | 
|  |  | 
|  | if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) == | 
|  | SAS_ADDR(child->sas_addr)) | 
|  | ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED; | 
|  | } | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ex->num_phys; i++) { | 
|  | struct ex_phy *phy = &ex->ex_phy[i]; | 
|  |  | 
|  | if (phy->phy_state == PHY_VACANT || | 
|  | phy->phy_state == PHY_NOT_PRESENT) | 
|  | continue; | 
|  |  | 
|  | if ((phy->attached_dev_type == EDGE_DEV || | 
|  | phy->attached_dev_type == FANOUT_DEV) && | 
|  | phy->routing_attr == SUBTRACTIVE_ROUTING) { | 
|  |  | 
|  | memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sas_check_level_subtractive_boundary(struct domain_device *dev) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | struct domain_device *child; | 
|  | u8 sub_addr[8] = {0, }; | 
|  |  | 
|  | list_for_each_entry(child, &ex->children, siblings) { | 
|  | if (child->dev_type != EDGE_DEV && | 
|  | child->dev_type != FANOUT_DEV) | 
|  | continue; | 
|  | if (sub_addr[0] == 0) { | 
|  | sas_find_sub_addr(child, sub_addr); | 
|  | continue; | 
|  | } else { | 
|  | u8 s2[8]; | 
|  |  | 
|  | if (sas_find_sub_addr(child, s2) && | 
|  | (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) { | 
|  |  | 
|  | SAS_DPRINTK("ex %016llx->%016llx-?->%016llx " | 
|  | "diverges from subtractive " | 
|  | "boundary %016llx\n", | 
|  | SAS_ADDR(dev->sas_addr), | 
|  | SAS_ADDR(child->sas_addr), | 
|  | SAS_ADDR(s2), | 
|  | SAS_ADDR(sub_addr)); | 
|  |  | 
|  | sas_ex_disable_port(child, s2); | 
|  | } | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | /** | 
|  | * sas_ex_discover_devices -- discover devices attached to this expander | 
|  | * dev: pointer to the expander domain device | 
|  | * single: if you want to do a single phy, else set to -1; | 
|  | * | 
|  | * Configure this expander for use with its devices and register the | 
|  | * devices of this expander. | 
|  | */ | 
|  | static int sas_ex_discover_devices(struct domain_device *dev, int single) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | int i = 0, end = ex->num_phys; | 
|  | int res = 0; | 
|  |  | 
|  | if (0 <= single && single < end) { | 
|  | i = single; | 
|  | end = i+1; | 
|  | } | 
|  |  | 
|  | for ( ; i < end; i++) { | 
|  | struct ex_phy *ex_phy = &ex->ex_phy[i]; | 
|  |  | 
|  | if (ex_phy->phy_state == PHY_VACANT || | 
|  | ex_phy->phy_state == PHY_NOT_PRESENT || | 
|  | ex_phy->phy_state == PHY_DEVICE_DISCOVERED) | 
|  | continue; | 
|  |  | 
|  | switch (ex_phy->linkrate) { | 
|  | case SAS_PHY_DISABLED: | 
|  | case SAS_PHY_RESET_PROBLEM: | 
|  | case SAS_SATA_PORT_SELECTOR: | 
|  | continue; | 
|  | default: | 
|  | res = sas_ex_discover_dev(dev, i); | 
|  | if (res) | 
|  | break; | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!res) | 
|  | sas_check_level_subtractive_boundary(dev); | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_check_ex_subtractive_boundary(struct domain_device *dev) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | int i; | 
|  | u8  *sub_sas_addr = NULL; | 
|  |  | 
|  | if (dev->dev_type != EDGE_DEV) | 
|  | return 0; | 
|  |  | 
|  | for (i = 0; i < ex->num_phys; i++) { | 
|  | struct ex_phy *phy = &ex->ex_phy[i]; | 
|  |  | 
|  | if (phy->phy_state == PHY_VACANT || | 
|  | phy->phy_state == PHY_NOT_PRESENT) | 
|  | continue; | 
|  |  | 
|  | if ((phy->attached_dev_type == FANOUT_DEV || | 
|  | phy->attached_dev_type == EDGE_DEV) && | 
|  | phy->routing_attr == SUBTRACTIVE_ROUTING) { | 
|  |  | 
|  | if (!sub_sas_addr) | 
|  | sub_sas_addr = &phy->attached_sas_addr[0]; | 
|  | else if (SAS_ADDR(sub_sas_addr) != | 
|  | SAS_ADDR(phy->attached_sas_addr)) { | 
|  |  | 
|  | SAS_DPRINTK("ex %016llx phy 0x%x " | 
|  | "diverges(%016llx) on subtractive " | 
|  | "boundary(%016llx). Disabled\n", | 
|  | SAS_ADDR(dev->sas_addr), i, | 
|  | SAS_ADDR(phy->attached_sas_addr), | 
|  | SAS_ADDR(sub_sas_addr)); | 
|  | sas_ex_disable_phy(dev, i); | 
|  | } | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void sas_print_parent_topology_bug(struct domain_device *child, | 
|  | struct ex_phy *parent_phy, | 
|  | struct ex_phy *child_phy) | 
|  | { | 
|  | static const char ra_char[] = { | 
|  | [DIRECT_ROUTING] = 'D', | 
|  | [SUBTRACTIVE_ROUTING] = 'S', | 
|  | [TABLE_ROUTING] = 'T', | 
|  | }; | 
|  | static const char *ex_type[] = { | 
|  | [EDGE_DEV] = "edge", | 
|  | [FANOUT_DEV] = "fanout", | 
|  | }; | 
|  | struct domain_device *parent = child->parent; | 
|  |  | 
|  | sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x " | 
|  | "has %c:%c routing link!\n", | 
|  |  | 
|  | ex_type[parent->dev_type], | 
|  | SAS_ADDR(parent->sas_addr), | 
|  | parent_phy->phy_id, | 
|  |  | 
|  | ex_type[child->dev_type], | 
|  | SAS_ADDR(child->sas_addr), | 
|  | child_phy->phy_id, | 
|  |  | 
|  | ra_char[parent_phy->routing_attr], | 
|  | ra_char[child_phy->routing_attr]); | 
|  | } | 
|  |  | 
|  | static int sas_check_eeds(struct domain_device *child, | 
|  | struct ex_phy *parent_phy, | 
|  | struct ex_phy *child_phy) | 
|  | { | 
|  | int res = 0; | 
|  | struct domain_device *parent = child->parent; | 
|  |  | 
|  | if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) { | 
|  | res = -ENODEV; | 
|  | SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx " | 
|  | "phy S:0x%x, while there is a fanout ex %016llx\n", | 
|  | SAS_ADDR(parent->sas_addr), | 
|  | parent_phy->phy_id, | 
|  | SAS_ADDR(child->sas_addr), | 
|  | child_phy->phy_id, | 
|  | SAS_ADDR(parent->port->disc.fanout_sas_addr)); | 
|  | } else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) { | 
|  | memcpy(parent->port->disc.eeds_a, parent->sas_addr, | 
|  | SAS_ADDR_SIZE); | 
|  | memcpy(parent->port->disc.eeds_b, child->sas_addr, | 
|  | SAS_ADDR_SIZE); | 
|  | } else if (((SAS_ADDR(parent->port->disc.eeds_a) == | 
|  | SAS_ADDR(parent->sas_addr)) || | 
|  | (SAS_ADDR(parent->port->disc.eeds_a) == | 
|  | SAS_ADDR(child->sas_addr))) | 
|  | && | 
|  | ((SAS_ADDR(parent->port->disc.eeds_b) == | 
|  | SAS_ADDR(parent->sas_addr)) || | 
|  | (SAS_ADDR(parent->port->disc.eeds_b) == | 
|  | SAS_ADDR(child->sas_addr)))) | 
|  | ; | 
|  | else { | 
|  | res = -ENODEV; | 
|  | SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx " | 
|  | "phy 0x%x link forms a third EEDS!\n", | 
|  | SAS_ADDR(parent->sas_addr), | 
|  | parent_phy->phy_id, | 
|  | SAS_ADDR(child->sas_addr), | 
|  | child_phy->phy_id); | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /* Here we spill over 80 columns.  It is intentional. | 
|  | */ | 
|  | static int sas_check_parent_topology(struct domain_device *child) | 
|  | { | 
|  | struct expander_device *child_ex = &child->ex_dev; | 
|  | struct expander_device *parent_ex; | 
|  | int i; | 
|  | int res = 0; | 
|  |  | 
|  | if (!child->parent) | 
|  | return 0; | 
|  |  | 
|  | if (child->parent->dev_type != EDGE_DEV && | 
|  | child->parent->dev_type != FANOUT_DEV) | 
|  | return 0; | 
|  |  | 
|  | parent_ex = &child->parent->ex_dev; | 
|  |  | 
|  | for (i = 0; i < parent_ex->num_phys; i++) { | 
|  | struct ex_phy *parent_phy = &parent_ex->ex_phy[i]; | 
|  | struct ex_phy *child_phy; | 
|  |  | 
|  | if (parent_phy->phy_state == PHY_VACANT || | 
|  | parent_phy->phy_state == PHY_NOT_PRESENT) | 
|  | continue; | 
|  |  | 
|  | if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr)) | 
|  | continue; | 
|  |  | 
|  | child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id]; | 
|  |  | 
|  | switch (child->parent->dev_type) { | 
|  | case EDGE_DEV: | 
|  | if (child->dev_type == FANOUT_DEV) { | 
|  | if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING || | 
|  | child_phy->routing_attr != TABLE_ROUTING) { | 
|  | sas_print_parent_topology_bug(child, parent_phy, child_phy); | 
|  | res = -ENODEV; | 
|  | } | 
|  | } else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) { | 
|  | if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) { | 
|  | res = sas_check_eeds(child, parent_phy, child_phy); | 
|  | } else if (child_phy->routing_attr != TABLE_ROUTING) { | 
|  | sas_print_parent_topology_bug(child, parent_phy, child_phy); | 
|  | res = -ENODEV; | 
|  | } | 
|  | } else if (parent_phy->routing_attr == TABLE_ROUTING && | 
|  | child_phy->routing_attr != SUBTRACTIVE_ROUTING) { | 
|  | sas_print_parent_topology_bug(child, parent_phy, child_phy); | 
|  | res = -ENODEV; | 
|  | } | 
|  | break; | 
|  | case FANOUT_DEV: | 
|  | if (parent_phy->routing_attr != TABLE_ROUTING || | 
|  | child_phy->routing_attr != SUBTRACTIVE_ROUTING) { | 
|  | sas_print_parent_topology_bug(child, parent_phy, child_phy); | 
|  | res = -ENODEV; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | #define RRI_REQ_SIZE  16 | 
|  | #define RRI_RESP_SIZE 44 | 
|  |  | 
|  | static int sas_configure_present(struct domain_device *dev, int phy_id, | 
|  | u8 *sas_addr, int *index, int *present) | 
|  | { | 
|  | int i, res = 0; | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | struct ex_phy *phy = &ex->ex_phy[phy_id]; | 
|  | u8 *rri_req; | 
|  | u8 *rri_resp; | 
|  |  | 
|  | *present = 0; | 
|  | *index = 0; | 
|  |  | 
|  | rri_req = alloc_smp_req(RRI_REQ_SIZE); | 
|  | if (!rri_req) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rri_resp = alloc_smp_resp(RRI_RESP_SIZE); | 
|  | if (!rri_resp) { | 
|  | kfree(rri_req); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | rri_req[1] = SMP_REPORT_ROUTE_INFO; | 
|  | rri_req[9] = phy_id; | 
|  |  | 
|  | for (i = 0; i < ex->max_route_indexes ; i++) { | 
|  | *(__be16 *)(rri_req+6) = cpu_to_be16(i); | 
|  | res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp, | 
|  | RRI_RESP_SIZE); | 
|  | if (res) | 
|  | goto out; | 
|  | res = rri_resp[2]; | 
|  | if (res == SMP_RESP_NO_INDEX) { | 
|  | SAS_DPRINTK("overflow of indexes: dev %016llx " | 
|  | "phy 0x%x index 0x%x\n", | 
|  | SAS_ADDR(dev->sas_addr), phy_id, i); | 
|  | goto out; | 
|  | } else if (res != SMP_RESP_FUNC_ACC) { | 
|  | SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x " | 
|  | "result 0x%x\n", __func__, | 
|  | SAS_ADDR(dev->sas_addr), phy_id, i, res); | 
|  | goto out; | 
|  | } | 
|  | if (SAS_ADDR(sas_addr) != 0) { | 
|  | if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) { | 
|  | *index = i; | 
|  | if ((rri_resp[12] & 0x80) == 0x80) | 
|  | *present = 0; | 
|  | else | 
|  | *present = 1; | 
|  | goto out; | 
|  | } else if (SAS_ADDR(rri_resp+16) == 0) { | 
|  | *index = i; | 
|  | *present = 0; | 
|  | goto out; | 
|  | } | 
|  | } else if (SAS_ADDR(rri_resp+16) == 0 && | 
|  | phy->last_da_index < i) { | 
|  | phy->last_da_index = i; | 
|  | *index = i; | 
|  | *present = 0; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | res = -1; | 
|  | out: | 
|  | kfree(rri_req); | 
|  | kfree(rri_resp); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | #define CRI_REQ_SIZE  44 | 
|  | #define CRI_RESP_SIZE  8 | 
|  |  | 
|  | static int sas_configure_set(struct domain_device *dev, int phy_id, | 
|  | u8 *sas_addr, int index, int include) | 
|  | { | 
|  | int res; | 
|  | u8 *cri_req; | 
|  | u8 *cri_resp; | 
|  |  | 
|  | cri_req = alloc_smp_req(CRI_REQ_SIZE); | 
|  | if (!cri_req) | 
|  | return -ENOMEM; | 
|  |  | 
|  | cri_resp = alloc_smp_resp(CRI_RESP_SIZE); | 
|  | if (!cri_resp) { | 
|  | kfree(cri_req); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | cri_req[1] = SMP_CONF_ROUTE_INFO; | 
|  | *(__be16 *)(cri_req+6) = cpu_to_be16(index); | 
|  | cri_req[9] = phy_id; | 
|  | if (SAS_ADDR(sas_addr) == 0 || !include) | 
|  | cri_req[12] |= 0x80; | 
|  | memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE); | 
|  |  | 
|  | res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp, | 
|  | CRI_RESP_SIZE); | 
|  | if (res) | 
|  | goto out; | 
|  | res = cri_resp[2]; | 
|  | if (res == SMP_RESP_NO_INDEX) { | 
|  | SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x " | 
|  | "index 0x%x\n", | 
|  | SAS_ADDR(dev->sas_addr), phy_id, index); | 
|  | } | 
|  | out: | 
|  | kfree(cri_req); | 
|  | kfree(cri_resp); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_configure_phy(struct domain_device *dev, int phy_id, | 
|  | u8 *sas_addr, int include) | 
|  | { | 
|  | int index; | 
|  | int present; | 
|  | int res; | 
|  |  | 
|  | res = sas_configure_present(dev, phy_id, sas_addr, &index, &present); | 
|  | if (res) | 
|  | return res; | 
|  | if (include ^ present) | 
|  | return sas_configure_set(dev, phy_id, sas_addr, index,include); | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * sas_configure_parent -- configure routing table of parent | 
|  | * parent: parent expander | 
|  | * child: child expander | 
|  | * sas_addr: SAS port identifier of device directly attached to child | 
|  | */ | 
|  | static int sas_configure_parent(struct domain_device *parent, | 
|  | struct domain_device *child, | 
|  | u8 *sas_addr, int include) | 
|  | { | 
|  | struct expander_device *ex_parent = &parent->ex_dev; | 
|  | int res = 0; | 
|  | int i; | 
|  |  | 
|  | if (parent->parent) { | 
|  | res = sas_configure_parent(parent->parent, parent, sas_addr, | 
|  | include); | 
|  | if (res) | 
|  | return res; | 
|  | } | 
|  |  | 
|  | if (ex_parent->conf_route_table == 0) { | 
|  | SAS_DPRINTK("ex %016llx has self-configuring routing table\n", | 
|  | SAS_ADDR(parent->sas_addr)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ex_parent->num_phys; i++) { | 
|  | struct ex_phy *phy = &ex_parent->ex_phy[i]; | 
|  |  | 
|  | if ((phy->routing_attr == TABLE_ROUTING) && | 
|  | (SAS_ADDR(phy->attached_sas_addr) == | 
|  | SAS_ADDR(child->sas_addr))) { | 
|  | res = sas_configure_phy(parent, i, sas_addr, include); | 
|  | if (res) | 
|  | return res; | 
|  | } | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * sas_configure_routing -- configure routing | 
|  | * dev: expander device | 
|  | * sas_addr: port identifier of device directly attached to the expander device | 
|  | */ | 
|  | static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr) | 
|  | { | 
|  | if (dev->parent) | 
|  | return sas_configure_parent(dev->parent, dev, sas_addr, 1); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr) | 
|  | { | 
|  | if (dev->parent) | 
|  | return sas_configure_parent(dev->parent, dev, sas_addr, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * sas_discover_expander -- expander discovery | 
|  | * @ex: pointer to expander domain device | 
|  | * | 
|  | * See comment in sas_discover_sata(). | 
|  | */ | 
|  | static int sas_discover_expander(struct domain_device *dev) | 
|  | { | 
|  | int res; | 
|  |  | 
|  | res = sas_notify_lldd_dev_found(dev); | 
|  | if (res) | 
|  | return res; | 
|  |  | 
|  | res = sas_ex_general(dev); | 
|  | if (res) | 
|  | goto out_err; | 
|  | res = sas_ex_manuf_info(dev); | 
|  | if (res) | 
|  | goto out_err; | 
|  |  | 
|  | res = sas_expander_discover(dev); | 
|  | if (res) { | 
|  | SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n", | 
|  | SAS_ADDR(dev->sas_addr), res); | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | sas_check_ex_subtractive_boundary(dev); | 
|  | res = sas_check_parent_topology(dev); | 
|  | if (res) | 
|  | goto out_err; | 
|  | return 0; | 
|  | out_err: | 
|  | sas_notify_lldd_dev_gone(dev); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_ex_level_discovery(struct asd_sas_port *port, const int level) | 
|  | { | 
|  | int res = 0; | 
|  | struct domain_device *dev; | 
|  |  | 
|  | list_for_each_entry(dev, &port->dev_list, dev_list_node) { | 
|  | if (dev->dev_type == EDGE_DEV || | 
|  | dev->dev_type == FANOUT_DEV) { | 
|  | struct sas_expander_device *ex = | 
|  | rphy_to_expander_device(dev->rphy); | 
|  |  | 
|  | if (level == ex->level) | 
|  | res = sas_ex_discover_devices(dev, -1); | 
|  | else if (level > 0) | 
|  | res = sas_ex_discover_devices(port->port_dev, -1); | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_ex_bfs_disc(struct asd_sas_port *port) | 
|  | { | 
|  | int res; | 
|  | int level; | 
|  |  | 
|  | do { | 
|  | level = port->disc.max_level; | 
|  | res = sas_ex_level_discovery(port, level); | 
|  | mb(); | 
|  | } while (level < port->disc.max_level); | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | int sas_discover_root_expander(struct domain_device *dev) | 
|  | { | 
|  | int res; | 
|  | struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); | 
|  |  | 
|  | res = sas_rphy_add(dev->rphy); | 
|  | if (res) | 
|  | goto out_err; | 
|  |  | 
|  | ex->level = dev->port->disc.max_level; /* 0 */ | 
|  | res = sas_discover_expander(dev); | 
|  | if (res) | 
|  | goto out_err2; | 
|  |  | 
|  | sas_ex_bfs_disc(dev->port); | 
|  |  | 
|  | return res; | 
|  |  | 
|  | out_err2: | 
|  | sas_rphy_remove(dev->rphy); | 
|  | out_err: | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /* ---------- Domain revalidation ---------- */ | 
|  |  | 
|  | static int sas_get_phy_discover(struct domain_device *dev, | 
|  | int phy_id, struct smp_resp *disc_resp) | 
|  | { | 
|  | int res; | 
|  | u8 *disc_req; | 
|  |  | 
|  | disc_req = alloc_smp_req(DISCOVER_REQ_SIZE); | 
|  | if (!disc_req) | 
|  | return -ENOMEM; | 
|  |  | 
|  | disc_req[1] = SMP_DISCOVER; | 
|  | disc_req[9] = phy_id; | 
|  |  | 
|  | res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, | 
|  | disc_resp, DISCOVER_RESP_SIZE); | 
|  | if (res) | 
|  | goto out; | 
|  | else if (disc_resp->result != SMP_RESP_FUNC_ACC) { | 
|  | res = disc_resp->result; | 
|  | goto out; | 
|  | } | 
|  | out: | 
|  | kfree(disc_req); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_get_phy_change_count(struct domain_device *dev, | 
|  | int phy_id, int *pcc) | 
|  | { | 
|  | int res; | 
|  | struct smp_resp *disc_resp; | 
|  |  | 
|  | disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); | 
|  | if (!disc_resp) | 
|  | return -ENOMEM; | 
|  |  | 
|  | res = sas_get_phy_discover(dev, phy_id, disc_resp); | 
|  | if (!res) | 
|  | *pcc = disc_resp->disc.change_count; | 
|  |  | 
|  | kfree(disc_resp); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_get_phy_attached_sas_addr(struct domain_device *dev, | 
|  | int phy_id, u8 *attached_sas_addr) | 
|  | { | 
|  | int res; | 
|  | struct smp_resp *disc_resp; | 
|  | struct discover_resp *dr; | 
|  |  | 
|  | disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); | 
|  | if (!disc_resp) | 
|  | return -ENOMEM; | 
|  | dr = &disc_resp->disc; | 
|  |  | 
|  | res = sas_get_phy_discover(dev, phy_id, disc_resp); | 
|  | if (!res) { | 
|  | memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8); | 
|  | if (dr->attached_dev_type == 0) | 
|  | memset(attached_sas_addr, 0, 8); | 
|  | } | 
|  | kfree(disc_resp); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id, | 
|  | int from_phy) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | int res = 0; | 
|  | int i; | 
|  |  | 
|  | for (i = from_phy; i < ex->num_phys; i++) { | 
|  | int phy_change_count = 0; | 
|  |  | 
|  | res = sas_get_phy_change_count(dev, i, &phy_change_count); | 
|  | if (res) | 
|  | goto out; | 
|  | else if (phy_change_count != ex->ex_phy[i].phy_change_count) { | 
|  | ex->ex_phy[i].phy_change_count = phy_change_count; | 
|  | *phy_id = i; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | out: | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_get_ex_change_count(struct domain_device *dev, int *ecc) | 
|  | { | 
|  | int res; | 
|  | u8  *rg_req; | 
|  | struct smp_resp  *rg_resp; | 
|  |  | 
|  | rg_req = alloc_smp_req(RG_REQ_SIZE); | 
|  | if (!rg_req) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rg_resp = alloc_smp_resp(RG_RESP_SIZE); | 
|  | if (!rg_resp) { | 
|  | kfree(rg_req); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | rg_req[1] = SMP_REPORT_GENERAL; | 
|  |  | 
|  | res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp, | 
|  | RG_RESP_SIZE); | 
|  | if (res) | 
|  | goto out; | 
|  | if (rg_resp->result != SMP_RESP_FUNC_ACC) { | 
|  | res = rg_resp->result; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | *ecc = be16_to_cpu(rg_resp->rg.change_count); | 
|  | out: | 
|  | kfree(rg_resp); | 
|  | kfree(rg_req); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_find_bcast_dev(struct domain_device *dev, | 
|  | struct domain_device **src_dev) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | int ex_change_count = -1; | 
|  | int res; | 
|  |  | 
|  | res = sas_get_ex_change_count(dev, &ex_change_count); | 
|  | if (res) | 
|  | goto out; | 
|  | if (ex_change_count != -1 && | 
|  | ex_change_count != ex->ex_change_count) { | 
|  | *src_dev = dev; | 
|  | ex->ex_change_count = ex_change_count; | 
|  | } else { | 
|  | struct domain_device *ch; | 
|  |  | 
|  | list_for_each_entry(ch, &ex->children, siblings) { | 
|  | if (ch->dev_type == EDGE_DEV || | 
|  | ch->dev_type == FANOUT_DEV) { | 
|  | res = sas_find_bcast_dev(ch, src_dev); | 
|  | if (src_dev) | 
|  | return res; | 
|  | } | 
|  | } | 
|  | } | 
|  | out: | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static void sas_unregister_ex_tree(struct domain_device *dev) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | struct domain_device *child, *n; | 
|  |  | 
|  | list_for_each_entry_safe(child, n, &ex->children, siblings) { | 
|  | if (child->dev_type == EDGE_DEV || | 
|  | child->dev_type == FANOUT_DEV) | 
|  | sas_unregister_ex_tree(child); | 
|  | else | 
|  | sas_unregister_dev(child); | 
|  | } | 
|  | sas_unregister_dev(dev); | 
|  | } | 
|  |  | 
|  | static void sas_unregister_devs_sas_addr(struct domain_device *parent, | 
|  | int phy_id) | 
|  | { | 
|  | struct expander_device *ex_dev = &parent->ex_dev; | 
|  | struct ex_phy *phy = &ex_dev->ex_phy[phy_id]; | 
|  | struct domain_device *child, *n; | 
|  |  | 
|  | list_for_each_entry_safe(child, n, &ex_dev->children, siblings) { | 
|  | if (SAS_ADDR(child->sas_addr) == | 
|  | SAS_ADDR(phy->attached_sas_addr)) { | 
|  | if (child->dev_type == EDGE_DEV || | 
|  | child->dev_type == FANOUT_DEV) | 
|  | sas_unregister_ex_tree(child); | 
|  | else | 
|  | sas_unregister_dev(child); | 
|  | break; | 
|  | } | 
|  | } | 
|  | sas_disable_routing(parent, phy->attached_sas_addr); | 
|  | memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); | 
|  | sas_port_delete_phy(phy->port, phy->phy); | 
|  | if (phy->port->num_phys == 0) | 
|  | sas_port_delete(phy->port); | 
|  | phy->port = NULL; | 
|  | } | 
|  |  | 
|  | static int sas_discover_bfs_by_root_level(struct domain_device *root, | 
|  | const int level) | 
|  | { | 
|  | struct expander_device *ex_root = &root->ex_dev; | 
|  | struct domain_device *child; | 
|  | int res = 0; | 
|  |  | 
|  | list_for_each_entry(child, &ex_root->children, siblings) { | 
|  | if (child->dev_type == EDGE_DEV || | 
|  | child->dev_type == FANOUT_DEV) { | 
|  | struct sas_expander_device *ex = | 
|  | rphy_to_expander_device(child->rphy); | 
|  |  | 
|  | if (level > ex->level) | 
|  | res = sas_discover_bfs_by_root_level(child, | 
|  | level); | 
|  | else if (level == ex->level) | 
|  | res = sas_ex_discover_devices(child, -1); | 
|  | } | 
|  | } | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_discover_bfs_by_root(struct domain_device *dev) | 
|  | { | 
|  | int res; | 
|  | struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); | 
|  | int level = ex->level+1; | 
|  |  | 
|  | res = sas_ex_discover_devices(dev, -1); | 
|  | if (res) | 
|  | goto out; | 
|  | do { | 
|  | res = sas_discover_bfs_by_root_level(dev, level); | 
|  | mb(); | 
|  | level += 1; | 
|  | } while (level <= dev->port->disc.max_level); | 
|  | out: | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_discover_new(struct domain_device *dev, int phy_id) | 
|  | { | 
|  | struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id]; | 
|  | struct domain_device *child; | 
|  | int res; | 
|  |  | 
|  | SAS_DPRINTK("ex %016llx phy%d new device attached\n", | 
|  | SAS_ADDR(dev->sas_addr), phy_id); | 
|  | res = sas_ex_phy_discover(dev, phy_id); | 
|  | if (res) | 
|  | goto out; | 
|  | res = sas_ex_discover_devices(dev, phy_id); | 
|  | if (res) | 
|  | goto out; | 
|  | list_for_each_entry(child, &dev->ex_dev.children, siblings) { | 
|  | if (SAS_ADDR(child->sas_addr) == | 
|  | SAS_ADDR(ex_phy->attached_sas_addr)) { | 
|  | if (child->dev_type == EDGE_DEV || | 
|  | child->dev_type == FANOUT_DEV) | 
|  | res = sas_discover_bfs_by_root(child); | 
|  | break; | 
|  | } | 
|  | } | 
|  | out: | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_rediscover_dev(struct domain_device *dev, int phy_id) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | struct ex_phy *phy = &ex->ex_phy[phy_id]; | 
|  | u8 attached_sas_addr[8]; | 
|  | int res; | 
|  |  | 
|  | res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr); | 
|  | switch (res) { | 
|  | case SMP_RESP_NO_PHY: | 
|  | phy->phy_state = PHY_NOT_PRESENT; | 
|  | sas_unregister_devs_sas_addr(dev, phy_id); | 
|  | goto out; break; | 
|  | case SMP_RESP_PHY_VACANT: | 
|  | phy->phy_state = PHY_VACANT; | 
|  | sas_unregister_devs_sas_addr(dev, phy_id); | 
|  | goto out; break; | 
|  | case SMP_RESP_FUNC_ACC: | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (SAS_ADDR(attached_sas_addr) == 0) { | 
|  | phy->phy_state = PHY_EMPTY; | 
|  | sas_unregister_devs_sas_addr(dev, phy_id); | 
|  | } else if (SAS_ADDR(attached_sas_addr) == | 
|  | SAS_ADDR(phy->attached_sas_addr)) { | 
|  | SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n", | 
|  | SAS_ADDR(dev->sas_addr), phy_id); | 
|  | sas_ex_phy_discover(dev, phy_id); | 
|  | } else | 
|  | res = sas_discover_new(dev, phy_id); | 
|  | out: | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int sas_rediscover(struct domain_device *dev, const int phy_id) | 
|  | { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | struct ex_phy *changed_phy = &ex->ex_phy[phy_id]; | 
|  | int res = 0; | 
|  | int i; | 
|  |  | 
|  | SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n", | 
|  | SAS_ADDR(dev->sas_addr), phy_id); | 
|  |  | 
|  | if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) { | 
|  | for (i = 0; i < ex->num_phys; i++) { | 
|  | struct ex_phy *phy = &ex->ex_phy[i]; | 
|  |  | 
|  | if (i == phy_id) | 
|  | continue; | 
|  | if (SAS_ADDR(phy->attached_sas_addr) == | 
|  | SAS_ADDR(changed_phy->attached_sas_addr)) { | 
|  | SAS_DPRINTK("phy%d part of wide port with " | 
|  | "phy%d\n", phy_id, i); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | res = sas_rediscover_dev(dev, phy_id); | 
|  | } else | 
|  | res = sas_discover_new(dev, phy_id); | 
|  | out: | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * sas_revalidate_domain -- revalidate the domain | 
|  | * @port: port to the domain of interest | 
|  | * | 
|  | * NOTE: this process _must_ quit (return) as soon as any connection | 
|  | * errors are encountered.  Connection recovery is done elsewhere. | 
|  | * Discover process only interrogates devices in order to discover the | 
|  | * domain. | 
|  | */ | 
|  | int sas_ex_revalidate_domain(struct domain_device *port_dev) | 
|  | { | 
|  | int res; | 
|  | struct domain_device *dev = NULL; | 
|  |  | 
|  | res = sas_find_bcast_dev(port_dev, &dev); | 
|  | if (res) | 
|  | goto out; | 
|  | if (dev) { | 
|  | struct expander_device *ex = &dev->ex_dev; | 
|  | int i = 0, phy_id; | 
|  |  | 
|  | do { | 
|  | phy_id = -1; | 
|  | res = sas_find_bcast_phy(dev, &phy_id, i); | 
|  | if (phy_id == -1) | 
|  | break; | 
|  | res = sas_rediscover(dev, phy_id); | 
|  | i = phy_id + 1; | 
|  | } while (i < ex->num_phys); | 
|  | } | 
|  | out: | 
|  | return res; | 
|  | } | 
|  |  | 
|  | int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, | 
|  | struct request *req) | 
|  | { | 
|  | struct domain_device *dev; | 
|  | int ret, type; | 
|  | struct request *rsp = req->next_rq; | 
|  |  | 
|  | if (!rsp) { | 
|  | printk("%s: space for a smp response is missing\n", | 
|  | __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* no rphy means no smp target support (ie aic94xx host) */ | 
|  | if (!rphy) | 
|  | return sas_smp_host_handler(shost, req, rsp); | 
|  |  | 
|  | type = rphy->identify.device_type; | 
|  |  | 
|  | if (type != SAS_EDGE_EXPANDER_DEVICE && | 
|  | type != SAS_FANOUT_EXPANDER_DEVICE) { | 
|  | printk("%s: can we send a smp request to a device?\n", | 
|  | __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | dev = sas_find_dev_by_rphy(rphy); | 
|  | if (!dev) { | 
|  | printk("%s: fail to find a domain_device?\n", __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* do we need to support multiple segments? */ | 
|  | if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) { | 
|  | printk("%s: multiple segments req %u %u, rsp %u %u\n", | 
|  | __func__, req->bio->bi_vcnt, req->data_len, | 
|  | rsp->bio->bi_vcnt, rsp->data_len); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ret = smp_execute_task(dev, bio_data(req->bio), req->data_len, | 
|  | bio_data(rsp->bio), rsp->data_len); | 
|  | if (ret > 0) { | 
|  | /* positive number is the untransferred residual */ | 
|  | rsp->data_len = ret; | 
|  | req->data_len = 0; | 
|  | ret = 0; | 
|  | } else if (ret == 0) { | 
|  | rsp->data_len = 0; | 
|  | req->data_len = 0; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } |