|  | /** | 
|  | * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI | 
|  | * | 
|  | * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com | 
|  | * Author: Keshava Munegowda <keshava_mgowda@ti.com> | 
|  | * | 
|  | * This program is free software: you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2  of | 
|  | * the License as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program.  If not, see <http://www.gnu.org/licenses/>. | 
|  | */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <plat/usb.h> | 
|  | #include <linux/pm_runtime.h> | 
|  |  | 
|  | #define USBHS_DRIVER_NAME	"usbhs_omap" | 
|  | #define OMAP_EHCI_DEVICE	"ehci-omap" | 
|  | #define OMAP_OHCI_DEVICE	"ohci-omap3" | 
|  |  | 
|  | /* OMAP USBHOST Register addresses  */ | 
|  |  | 
|  | /* TLL Register Set */ | 
|  | #define	OMAP_USBTLL_REVISION				(0x00) | 
|  | #define	OMAP_USBTLL_SYSCONFIG				(0x10) | 
|  | #define	OMAP_USBTLL_SYSCONFIG_CACTIVITY			(1 << 8) | 
|  | #define	OMAP_USBTLL_SYSCONFIG_SIDLEMODE			(1 << 3) | 
|  | #define	OMAP_USBTLL_SYSCONFIG_ENAWAKEUP			(1 << 2) | 
|  | #define	OMAP_USBTLL_SYSCONFIG_SOFTRESET			(1 << 1) | 
|  | #define	OMAP_USBTLL_SYSCONFIG_AUTOIDLE			(1 << 0) | 
|  |  | 
|  | #define	OMAP_USBTLL_SYSSTATUS				(0x14) | 
|  | #define	OMAP_USBTLL_SYSSTATUS_RESETDONE			(1 << 0) | 
|  |  | 
|  | #define	OMAP_USBTLL_IRQSTATUS				(0x18) | 
|  | #define	OMAP_USBTLL_IRQENABLE				(0x1C) | 
|  |  | 
|  | #define	OMAP_TLL_SHARED_CONF				(0x30) | 
|  | #define	OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN		(1 << 6) | 
|  | #define	OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN		(1 << 5) | 
|  | #define	OMAP_TLL_SHARED_CONF_USB_DIVRATION		(1 << 2) | 
|  | #define	OMAP_TLL_SHARED_CONF_FCLK_REQ			(1 << 1) | 
|  | #define	OMAP_TLL_SHARED_CONF_FCLK_IS_ON			(1 << 0) | 
|  |  | 
|  | #define	OMAP_TLL_CHANNEL_CONF(num)			(0x040 + 0x004 * num) | 
|  | #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT		24 | 
|  | #define	OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11) | 
|  | #define	OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE		(1 << 10) | 
|  | #define	OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE		(1 << 9) | 
|  | #define	OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE		(1 << 8) | 
|  | #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS		(1 << 1) | 
|  | #define	OMAP_TLL_CHANNEL_CONF_CHANEN			(1 << 0) | 
|  |  | 
|  | #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0		0x0 | 
|  | #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM		0x1 | 
|  | #define OMAP_TLL_FSLSMODE_3PIN_PHY			0x2 | 
|  | #define OMAP_TLL_FSLSMODE_4PIN_PHY			0x3 | 
|  | #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0		0x4 | 
|  | #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM		0x5 | 
|  | #define OMAP_TLL_FSLSMODE_3PIN_TLL			0x6 | 
|  | #define OMAP_TLL_FSLSMODE_4PIN_TLL			0x7 | 
|  | #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0		0xA | 
|  | #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM		0xB | 
|  |  | 
|  | #define	OMAP_TLL_ULPI_FUNCTION_CTRL(num)		(0x804 + 0x100 * num) | 
|  | #define	OMAP_TLL_ULPI_INTERFACE_CTRL(num)		(0x807 + 0x100 * num) | 
|  | #define	OMAP_TLL_ULPI_OTG_CTRL(num)			(0x80A + 0x100 * num) | 
|  | #define	OMAP_TLL_ULPI_INT_EN_RISE(num)			(0x80D + 0x100 * num) | 
|  | #define	OMAP_TLL_ULPI_INT_EN_FALL(num)			(0x810 + 0x100 * num) | 
|  | #define	OMAP_TLL_ULPI_INT_STATUS(num)			(0x813 + 0x100 * num) | 
|  | #define	OMAP_TLL_ULPI_INT_LATCH(num)			(0x814 + 0x100 * num) | 
|  | #define	OMAP_TLL_ULPI_DEBUG(num)			(0x815 + 0x100 * num) | 
|  | #define	OMAP_TLL_ULPI_SCRATCH_REGISTER(num)		(0x816 + 0x100 * num) | 
|  |  | 
|  | #define OMAP_TLL_CHANNEL_COUNT				3 | 
|  | #define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 0) | 
|  | #define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 1) | 
|  | #define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 2) | 
|  |  | 
|  | /* UHH Register Set */ | 
|  | #define	OMAP_UHH_REVISION				(0x00) | 
|  | #define	OMAP_UHH_SYSCONFIG				(0x10) | 
|  | #define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12) | 
|  | #define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8) | 
|  | #define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3) | 
|  | #define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2) | 
|  | #define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1) | 
|  | #define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0) | 
|  |  | 
|  | #define	OMAP_UHH_SYSSTATUS				(0x14) | 
|  | #define	OMAP_UHH_HOSTCONFIG				(0x40) | 
|  | #define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0) | 
|  | #define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0) | 
|  | #define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11) | 
|  | #define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12) | 
|  | #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2) | 
|  | #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3) | 
|  | #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4) | 
|  | #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5) | 
|  | #define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8) | 
|  | #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9) | 
|  | #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10) | 
|  | #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK		(1 << 31) | 
|  |  | 
|  | /* OMAP4-specific defines */ | 
|  | #define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2) | 
|  | #define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2) | 
|  | #define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4) | 
|  | #define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4) | 
|  | #define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0) | 
|  |  | 
|  | #define OMAP4_P1_MODE_CLEAR				(3 << 16) | 
|  | #define OMAP4_P1_MODE_TLL				(1 << 16) | 
|  | #define OMAP4_P1_MODE_HSIC				(3 << 16) | 
|  | #define OMAP4_P2_MODE_CLEAR				(3 << 18) | 
|  | #define OMAP4_P2_MODE_TLL				(1 << 18) | 
|  | #define OMAP4_P2_MODE_HSIC				(3 << 18) | 
|  |  | 
|  | #define OMAP_REV2_TLL_CHANNEL_COUNT			2 | 
|  |  | 
|  | #define	OMAP_UHH_DEBUG_CSR				(0x44) | 
|  |  | 
|  | /* Values of UHH_REVISION - Note: these are not given in the TRM */ | 
|  | #define OMAP_USBHS_REV1		0x00000010	/* OMAP3 */ | 
|  | #define OMAP_USBHS_REV2		0x50700100	/* OMAP4 */ | 
|  |  | 
|  | #define is_omap_usbhs_rev1(x)	(x->usbhs_rev == OMAP_USBHS_REV1) | 
|  | #define is_omap_usbhs_rev2(x)	(x->usbhs_rev == OMAP_USBHS_REV2) | 
|  |  | 
|  | #define is_ehci_phy_mode(x)	(x == OMAP_EHCI_PORT_MODE_PHY) | 
|  | #define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL) | 
|  | #define is_ehci_hsic_mode(x)	(x == OMAP_EHCI_PORT_MODE_HSIC) | 
|  |  | 
|  |  | 
|  | struct usbhs_hcd_omap { | 
|  | struct clk			*xclk60mhsp1_ck; | 
|  | struct clk			*xclk60mhsp2_ck; | 
|  | struct clk			*utmi_p1_fck; | 
|  | struct clk			*usbhost_p1_fck; | 
|  | struct clk			*usbtll_p1_fck; | 
|  | struct clk			*utmi_p2_fck; | 
|  | struct clk			*usbhost_p2_fck; | 
|  | struct clk			*usbtll_p2_fck; | 
|  | struct clk			*init_60m_fclk; | 
|  | struct clk			*ehci_logic_fck; | 
|  |  | 
|  | void __iomem			*uhh_base; | 
|  | void __iomem			*tll_base; | 
|  |  | 
|  | struct usbhs_omap_platform_data	platdata; | 
|  |  | 
|  | u32				usbhs_rev; | 
|  | spinlock_t			lock; | 
|  | }; | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | const char usbhs_driver_name[] = USBHS_DRIVER_NAME; | 
|  | static u64 usbhs_dmamask = ~(u32)0; | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | static inline void usbhs_write(void __iomem *base, u32 reg, u32 val) | 
|  | { | 
|  | __raw_writel(val, base + reg); | 
|  | } | 
|  |  | 
|  | static inline u32 usbhs_read(void __iomem *base, u32 reg) | 
|  | { | 
|  | return __raw_readl(base + reg); | 
|  | } | 
|  |  | 
|  | static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val) | 
|  | { | 
|  | __raw_writeb(val, base + reg); | 
|  | } | 
|  |  | 
|  | static inline u8 usbhs_readb(void __iomem *base, u8 reg) | 
|  | { | 
|  | return __raw_readb(base + reg); | 
|  | } | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | static struct platform_device *omap_usbhs_alloc_child(const char *name, | 
|  | struct resource	*res, int num_resources, void *pdata, | 
|  | size_t pdata_size, struct device *dev) | 
|  | { | 
|  | struct platform_device	*child; | 
|  | int			ret; | 
|  |  | 
|  | child = platform_device_alloc(name, 0); | 
|  |  | 
|  | if (!child) { | 
|  | dev_err(dev, "platform_device_alloc %s failed\n", name); | 
|  | goto err_end; | 
|  | } | 
|  |  | 
|  | ret = platform_device_add_resources(child, res, num_resources); | 
|  | if (ret) { | 
|  | dev_err(dev, "platform_device_add_resources failed\n"); | 
|  | goto err_alloc; | 
|  | } | 
|  |  | 
|  | ret = platform_device_add_data(child, pdata, pdata_size); | 
|  | if (ret) { | 
|  | dev_err(dev, "platform_device_add_data failed\n"); | 
|  | goto err_alloc; | 
|  | } | 
|  |  | 
|  | child->dev.dma_mask		= &usbhs_dmamask; | 
|  | child->dev.coherent_dma_mask	= 0xffffffff; | 
|  | child->dev.parent		= dev; | 
|  |  | 
|  | ret = platform_device_add(child); | 
|  | if (ret) { | 
|  | dev_err(dev, "platform_device_add failed\n"); | 
|  | goto err_alloc; | 
|  | } | 
|  |  | 
|  | return child; | 
|  |  | 
|  | err_alloc: | 
|  | platform_device_put(child); | 
|  |  | 
|  | err_end: | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int omap_usbhs_alloc_children(struct platform_device *pdev) | 
|  | { | 
|  | struct device				*dev = &pdev->dev; | 
|  | struct usbhs_hcd_omap			*omap; | 
|  | struct ehci_hcd_omap_platform_data	*ehci_data; | 
|  | struct ohci_hcd_omap_platform_data	*ohci_data; | 
|  | struct platform_device			*ehci; | 
|  | struct platform_device			*ohci; | 
|  | struct resource				*res; | 
|  | struct resource				resources[2]; | 
|  | int					ret; | 
|  |  | 
|  | omap = platform_get_drvdata(pdev); | 
|  | ehci_data = omap->platdata.ehci_data; | 
|  | ohci_data = omap->platdata.ohci_data; | 
|  |  | 
|  | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci"); | 
|  | if (!res) { | 
|  | dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n"); | 
|  | ret = -ENODEV; | 
|  | goto err_end; | 
|  | } | 
|  | resources[0] = *res; | 
|  |  | 
|  | res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq"); | 
|  | if (!res) { | 
|  | dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n"); | 
|  | ret = -ENODEV; | 
|  | goto err_end; | 
|  | } | 
|  | resources[1] = *res; | 
|  |  | 
|  | ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data, | 
|  | sizeof(*ehci_data), dev); | 
|  |  | 
|  | if (!ehci) { | 
|  | dev_err(dev, "omap_usbhs_alloc_child failed\n"); | 
|  | ret = -ENOMEM; | 
|  | goto err_end; | 
|  | } | 
|  |  | 
|  | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci"); | 
|  | if (!res) { | 
|  | dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n"); | 
|  | ret = -ENODEV; | 
|  | goto err_ehci; | 
|  | } | 
|  | resources[0] = *res; | 
|  |  | 
|  | res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq"); | 
|  | if (!res) { | 
|  | dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n"); | 
|  | ret = -ENODEV; | 
|  | goto err_ehci; | 
|  | } | 
|  | resources[1] = *res; | 
|  |  | 
|  | ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data, | 
|  | sizeof(*ohci_data), dev); | 
|  | if (!ohci) { | 
|  | dev_err(dev, "omap_usbhs_alloc_child failed\n"); | 
|  | ret = -ENOMEM; | 
|  | goto err_ehci; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_ehci: | 
|  | platform_device_unregister(ehci); | 
|  |  | 
|  | err_end: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static bool is_ohci_port(enum usbhs_omap_port_mode pmode) | 
|  | { | 
|  | switch (pmode) { | 
|  | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | 
|  | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | 
|  | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | 
|  | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | 
|  | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | 
|  | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | 
|  | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | 
|  | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | 
|  | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | 
|  | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | 
|  | return true; | 
|  |  | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * convert the port-mode enum to a value we can use in the FSLSMODE | 
|  | * field of USBTLL_CHANNEL_CONF | 
|  | */ | 
|  | static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) | 
|  | { | 
|  | switch (mode) { | 
|  | case OMAP_USBHS_PORT_MODE_UNUSED: | 
|  | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | 
|  | return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; | 
|  |  | 
|  | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | 
|  | return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM; | 
|  |  | 
|  | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | 
|  | return OMAP_TLL_FSLSMODE_3PIN_PHY; | 
|  |  | 
|  | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | 
|  | return OMAP_TLL_FSLSMODE_4PIN_PHY; | 
|  |  | 
|  | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | 
|  | return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0; | 
|  |  | 
|  | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | 
|  | return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM; | 
|  |  | 
|  | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | 
|  | return OMAP_TLL_FSLSMODE_3PIN_TLL; | 
|  |  | 
|  | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | 
|  | return OMAP_TLL_FSLSMODE_4PIN_TLL; | 
|  |  | 
|  | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | 
|  | return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0; | 
|  |  | 
|  | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | 
|  | return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM; | 
|  | default: | 
|  | pr_warning("Invalid port mode, using default\n"); | 
|  | return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count) | 
|  | { | 
|  | struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev); | 
|  | struct usbhs_omap_platform_data	*pdata = dev->platform_data; | 
|  | unsigned			reg; | 
|  | int				i; | 
|  |  | 
|  | /* Program Common TLL register */ | 
|  | reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF); | 
|  | reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON | 
|  | | OMAP_TLL_SHARED_CONF_USB_DIVRATION); | 
|  | reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; | 
|  | reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; | 
|  |  | 
|  | usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); | 
|  |  | 
|  | /* Enable channels now */ | 
|  | for (i = 0; i < tll_channel_count; i++) { | 
|  | reg = usbhs_read(omap->tll_base, | 
|  | OMAP_TLL_CHANNEL_CONF(i)); | 
|  |  | 
|  | if (is_ohci_port(pdata->port_mode[i])) { | 
|  | reg |= ohci_omap3_fslsmode(pdata->port_mode[i]) | 
|  | << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; | 
|  | reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; | 
|  | } else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) { | 
|  |  | 
|  | /* Disable AutoIdle, BitStuffing and use SDR Mode */ | 
|  | reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE | 
|  | | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF | 
|  | | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); | 
|  |  | 
|  | } else | 
|  | continue; | 
|  |  | 
|  | reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; | 
|  | usbhs_write(omap->tll_base, | 
|  | OMAP_TLL_CHANNEL_CONF(i), reg); | 
|  |  | 
|  | usbhs_writeb(omap->tll_base, | 
|  | OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int usbhs_runtime_resume(struct device *dev) | 
|  | { | 
|  | struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev); | 
|  | struct usbhs_omap_platform_data	*pdata = &omap->platdata; | 
|  | unsigned long			flags; | 
|  |  | 
|  | dev_dbg(dev, "usbhs_runtime_resume\n"); | 
|  |  | 
|  | if (!pdata) { | 
|  | dev_dbg(dev, "missing platform_data\n"); | 
|  | return  -ENODEV; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&omap->lock, flags); | 
|  |  | 
|  | if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck)) | 
|  | clk_enable(omap->ehci_logic_fck); | 
|  |  | 
|  | if (is_ehci_tll_mode(pdata->port_mode[0])) { | 
|  | clk_enable(omap->usbhost_p1_fck); | 
|  | clk_enable(omap->usbtll_p1_fck); | 
|  | } | 
|  | if (is_ehci_tll_mode(pdata->port_mode[1])) { | 
|  | clk_enable(omap->usbhost_p2_fck); | 
|  | clk_enable(omap->usbtll_p2_fck); | 
|  | } | 
|  | clk_enable(omap->utmi_p1_fck); | 
|  | clk_enable(omap->utmi_p2_fck); | 
|  |  | 
|  | spin_unlock_irqrestore(&omap->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usbhs_runtime_suspend(struct device *dev) | 
|  | { | 
|  | struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev); | 
|  | struct usbhs_omap_platform_data	*pdata = &omap->platdata; | 
|  | unsigned long			flags; | 
|  |  | 
|  | dev_dbg(dev, "usbhs_runtime_suspend\n"); | 
|  |  | 
|  | if (!pdata) { | 
|  | dev_dbg(dev, "missing platform_data\n"); | 
|  | return  -ENODEV; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&omap->lock, flags); | 
|  |  | 
|  | if (is_ehci_tll_mode(pdata->port_mode[0])) { | 
|  | clk_disable(omap->usbhost_p1_fck); | 
|  | clk_disable(omap->usbtll_p1_fck); | 
|  | } | 
|  | if (is_ehci_tll_mode(pdata->port_mode[1])) { | 
|  | clk_disable(omap->usbhost_p2_fck); | 
|  | clk_disable(omap->usbtll_p2_fck); | 
|  | } | 
|  | clk_disable(omap->utmi_p2_fck); | 
|  | clk_disable(omap->utmi_p1_fck); | 
|  |  | 
|  | if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck)) | 
|  | clk_disable(omap->ehci_logic_fck); | 
|  |  | 
|  | spin_unlock_irqrestore(&omap->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void omap_usbhs_init(struct device *dev) | 
|  | { | 
|  | struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev); | 
|  | struct usbhs_omap_platform_data	*pdata = &omap->platdata; | 
|  | unsigned long			flags; | 
|  | unsigned			reg; | 
|  |  | 
|  | dev_dbg(dev, "starting TI HSUSB Controller\n"); | 
|  |  | 
|  | pm_runtime_get_sync(dev); | 
|  | spin_lock_irqsave(&omap->lock, flags); | 
|  |  | 
|  | if (pdata->ehci_data->phy_reset) { | 
|  | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) | 
|  | gpio_request_one(pdata->ehci_data->reset_gpio_port[0], | 
|  | GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); | 
|  |  | 
|  | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) | 
|  | gpio_request_one(pdata->ehci_data->reset_gpio_port[1], | 
|  | GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); | 
|  |  | 
|  | /* Hold the PHY in RESET for enough time till DIR is high */ | 
|  | udelay(10); | 
|  | } | 
|  |  | 
|  | omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); | 
|  | dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); | 
|  |  | 
|  | reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); | 
|  | /* setup ULPI bypass and burst configurations */ | 
|  | reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN | 
|  | | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN | 
|  | | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); | 
|  | reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK; | 
|  | reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; | 
|  |  | 
|  | if (is_omap_usbhs_rev1(omap)) { | 
|  | if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED) | 
|  | reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; | 
|  | if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED) | 
|  | reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; | 
|  | if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED) | 
|  | reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; | 
|  |  | 
|  | /* Bypass the TLL module for PHY mode operation */ | 
|  | if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) { | 
|  | dev_dbg(dev, "OMAP3 ES version <= ES2.1\n"); | 
|  | if (is_ehci_phy_mode(pdata->port_mode[0]) || | 
|  | is_ehci_phy_mode(pdata->port_mode[1]) || | 
|  | is_ehci_phy_mode(pdata->port_mode[2])) | 
|  | reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; | 
|  | else | 
|  | reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; | 
|  | } else { | 
|  | dev_dbg(dev, "OMAP3 ES version > ES2.1\n"); | 
|  | if (is_ehci_phy_mode(pdata->port_mode[0])) | 
|  | reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; | 
|  | else | 
|  | reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; | 
|  | if (is_ehci_phy_mode(pdata->port_mode[1])) | 
|  | reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; | 
|  | else | 
|  | reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; | 
|  | if (is_ehci_phy_mode(pdata->port_mode[2])) | 
|  | reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; | 
|  | else | 
|  | reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; | 
|  | } | 
|  | } else if (is_omap_usbhs_rev2(omap)) { | 
|  | /* Clear port mode fields for PHY mode*/ | 
|  | reg &= ~OMAP4_P1_MODE_CLEAR; | 
|  | reg &= ~OMAP4_P2_MODE_CLEAR; | 
|  |  | 
|  | if (is_ehci_tll_mode(pdata->port_mode[0]) || | 
|  | (is_ohci_port(pdata->port_mode[0]))) | 
|  | reg |= OMAP4_P1_MODE_TLL; | 
|  | else if (is_ehci_hsic_mode(pdata->port_mode[0])) | 
|  | reg |= OMAP4_P1_MODE_HSIC; | 
|  |  | 
|  | if (is_ehci_tll_mode(pdata->port_mode[1]) || | 
|  | (is_ohci_port(pdata->port_mode[1]))) | 
|  | reg |= OMAP4_P2_MODE_TLL; | 
|  | else if (is_ehci_hsic_mode(pdata->port_mode[1])) | 
|  | reg |= OMAP4_P2_MODE_HSIC; | 
|  | } | 
|  |  | 
|  | usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); | 
|  | dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg); | 
|  |  | 
|  | if (is_ehci_tll_mode(pdata->port_mode[0]) || | 
|  | is_ehci_tll_mode(pdata->port_mode[1]) || | 
|  | is_ehci_tll_mode(pdata->port_mode[2]) || | 
|  | (is_ohci_port(pdata->port_mode[0])) || | 
|  | (is_ohci_port(pdata->port_mode[1])) || | 
|  | (is_ohci_port(pdata->port_mode[2]))) { | 
|  |  | 
|  | /* Enable UTMI mode for required TLL channels */ | 
|  | if (is_omap_usbhs_rev2(omap)) | 
|  | usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT); | 
|  | else | 
|  | usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT); | 
|  | } | 
|  |  | 
|  | if (pdata->ehci_data->phy_reset) { | 
|  | /* Hold the PHY in RESET for enough time till | 
|  | * PHY is settled and ready | 
|  | */ | 
|  | udelay(10); | 
|  |  | 
|  | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) | 
|  | gpio_set_value | 
|  | (pdata->ehci_data->reset_gpio_port[0], 1); | 
|  |  | 
|  | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) | 
|  | gpio_set_value | 
|  | (pdata->ehci_data->reset_gpio_port[1], 1); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&omap->lock, flags); | 
|  | pm_runtime_put_sync(dev); | 
|  | } | 
|  |  | 
|  | static void omap_usbhs_deinit(struct device *dev) | 
|  | { | 
|  | struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev); | 
|  | struct usbhs_omap_platform_data	*pdata = &omap->platdata; | 
|  |  | 
|  | if (pdata->ehci_data->phy_reset) { | 
|  | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) | 
|  | gpio_free(pdata->ehci_data->reset_gpio_port[0]); | 
|  |  | 
|  | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) | 
|  | gpio_free(pdata->ehci_data->reset_gpio_port[1]); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * usbhs_omap_probe - initialize TI-based HCDs | 
|  | * | 
|  | * Allocates basic resources for this USB host controller. | 
|  | */ | 
|  | static int __devinit usbhs_omap_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device			*dev =  &pdev->dev; | 
|  | struct usbhs_omap_platform_data	*pdata = dev->platform_data; | 
|  | struct usbhs_hcd_omap		*omap; | 
|  | struct resource			*res; | 
|  | int				ret = 0; | 
|  | int				i; | 
|  |  | 
|  | if (!pdata) { | 
|  | dev_err(dev, "Missing platform data\n"); | 
|  | ret = -ENOMEM; | 
|  | goto end_probe; | 
|  | } | 
|  |  | 
|  | omap = kzalloc(sizeof(*omap), GFP_KERNEL); | 
|  | if (!omap) { | 
|  | dev_err(dev, "Memory allocation failed\n"); | 
|  | ret = -ENOMEM; | 
|  | goto end_probe; | 
|  | } | 
|  |  | 
|  | spin_lock_init(&omap->lock); | 
|  |  | 
|  | for (i = 0; i < OMAP3_HS_USB_PORTS; i++) | 
|  | omap->platdata.port_mode[i] = pdata->port_mode[i]; | 
|  |  | 
|  | omap->platdata.ehci_data = pdata->ehci_data; | 
|  | omap->platdata.ohci_data = pdata->ohci_data; | 
|  |  | 
|  | pm_runtime_enable(dev); | 
|  |  | 
|  |  | 
|  | for (i = 0; i < OMAP3_HS_USB_PORTS; i++) | 
|  | if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) || | 
|  | is_ehci_hsic_mode(i)) { | 
|  | omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck"); | 
|  | if (IS_ERR(omap->ehci_logic_fck)) { | 
|  | ret = PTR_ERR(omap->ehci_logic_fck); | 
|  | dev_warn(dev, "ehci_logic_fck failed:%d\n", | 
|  | ret); | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); | 
|  | if (IS_ERR(omap->utmi_p1_fck)) { | 
|  | ret = PTR_ERR(omap->utmi_p1_fck); | 
|  | dev_err(dev, "utmi_p1_gfclk failed error:%d\n",	ret); | 
|  | goto err_end; | 
|  | } | 
|  |  | 
|  | omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); | 
|  | if (IS_ERR(omap->xclk60mhsp1_ck)) { | 
|  | ret = PTR_ERR(omap->xclk60mhsp1_ck); | 
|  | dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); | 
|  | goto err_utmi_p1_fck; | 
|  | } | 
|  |  | 
|  | omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); | 
|  | if (IS_ERR(omap->utmi_p2_fck)) { | 
|  | ret = PTR_ERR(omap->utmi_p2_fck); | 
|  | dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); | 
|  | goto err_xclk60mhsp1_ck; | 
|  | } | 
|  |  | 
|  | omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); | 
|  | if (IS_ERR(omap->xclk60mhsp2_ck)) { | 
|  | ret = PTR_ERR(omap->xclk60mhsp2_ck); | 
|  | dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); | 
|  | goto err_utmi_p2_fck; | 
|  | } | 
|  |  | 
|  | omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); | 
|  | if (IS_ERR(omap->usbhost_p1_fck)) { | 
|  | ret = PTR_ERR(omap->usbhost_p1_fck); | 
|  | dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); | 
|  | goto err_xclk60mhsp2_ck; | 
|  | } | 
|  |  | 
|  | omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk"); | 
|  | if (IS_ERR(omap->usbtll_p1_fck)) { | 
|  | ret = PTR_ERR(omap->usbtll_p1_fck); | 
|  | dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret); | 
|  | goto err_usbhost_p1_fck; | 
|  | } | 
|  |  | 
|  | omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); | 
|  | if (IS_ERR(omap->usbhost_p2_fck)) { | 
|  | ret = PTR_ERR(omap->usbhost_p2_fck); | 
|  | dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); | 
|  | goto err_usbtll_p1_fck; | 
|  | } | 
|  |  | 
|  | omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk"); | 
|  | if (IS_ERR(omap->usbtll_p2_fck)) { | 
|  | ret = PTR_ERR(omap->usbtll_p2_fck); | 
|  | dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret); | 
|  | goto err_usbhost_p2_fck; | 
|  | } | 
|  |  | 
|  | omap->init_60m_fclk = clk_get(dev, "init_60m_fclk"); | 
|  | if (IS_ERR(omap->init_60m_fclk)) { | 
|  | ret = PTR_ERR(omap->init_60m_fclk); | 
|  | dev_err(dev, "init_60m_fclk failed error:%d\n", ret); | 
|  | goto err_usbtll_p2_fck; | 
|  | } | 
|  |  | 
|  | if (is_ehci_phy_mode(pdata->port_mode[0])) { | 
|  | /* for OMAP3 , the clk set paretn fails */ | 
|  | ret = clk_set_parent(omap->utmi_p1_fck, | 
|  | omap->xclk60mhsp1_ck); | 
|  | if (ret != 0) | 
|  | dev_err(dev, "xclk60mhsp1_ck set parent" | 
|  | "failed error:%d\n", ret); | 
|  | } else if (is_ehci_tll_mode(pdata->port_mode[0])) { | 
|  | ret = clk_set_parent(omap->utmi_p1_fck, | 
|  | omap->init_60m_fclk); | 
|  | if (ret != 0) | 
|  | dev_err(dev, "init_60m_fclk set parent" | 
|  | "failed error:%d\n", ret); | 
|  | } | 
|  |  | 
|  | if (is_ehci_phy_mode(pdata->port_mode[1])) { | 
|  | ret = clk_set_parent(omap->utmi_p2_fck, | 
|  | omap->xclk60mhsp2_ck); | 
|  | if (ret != 0) | 
|  | dev_err(dev, "xclk60mhsp2_ck set parent" | 
|  | "failed error:%d\n", ret); | 
|  | } else if (is_ehci_tll_mode(pdata->port_mode[1])) { | 
|  | ret = clk_set_parent(omap->utmi_p2_fck, | 
|  | omap->init_60m_fclk); | 
|  | if (ret != 0) | 
|  | dev_err(dev, "init_60m_fclk set parent" | 
|  | "failed error:%d\n", ret); | 
|  | } | 
|  |  | 
|  | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh"); | 
|  | if (!res) { | 
|  | dev_err(dev, "UHH EHCI get resource failed\n"); | 
|  | ret = -ENODEV; | 
|  | goto err_init_60m_fclk; | 
|  | } | 
|  |  | 
|  | omap->uhh_base = ioremap(res->start, resource_size(res)); | 
|  | if (!omap->uhh_base) { | 
|  | dev_err(dev, "UHH ioremap failed\n"); | 
|  | ret = -ENOMEM; | 
|  | goto err_init_60m_fclk; | 
|  | } | 
|  |  | 
|  | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll"); | 
|  | if (!res) { | 
|  | dev_err(dev, "UHH EHCI get resource failed\n"); | 
|  | ret = -ENODEV; | 
|  | goto err_tll; | 
|  | } | 
|  |  | 
|  | omap->tll_base = ioremap(res->start, resource_size(res)); | 
|  | if (!omap->tll_base) { | 
|  | dev_err(dev, "TLL ioremap failed\n"); | 
|  | ret = -ENOMEM; | 
|  | goto err_tll; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, omap); | 
|  |  | 
|  | ret = omap_usbhs_alloc_children(pdev); | 
|  | if (ret) { | 
|  | dev_err(dev, "omap_usbhs_alloc_children failed\n"); | 
|  | goto err_alloc; | 
|  | } | 
|  |  | 
|  | omap_usbhs_init(dev); | 
|  |  | 
|  | goto end_probe; | 
|  |  | 
|  | err_alloc: | 
|  | iounmap(omap->tll_base); | 
|  |  | 
|  | err_tll: | 
|  | iounmap(omap->uhh_base); | 
|  |  | 
|  | err_init_60m_fclk: | 
|  | clk_put(omap->init_60m_fclk); | 
|  |  | 
|  | err_usbtll_p2_fck: | 
|  | clk_put(omap->usbtll_p2_fck); | 
|  |  | 
|  | err_usbhost_p2_fck: | 
|  | clk_put(omap->usbhost_p2_fck); | 
|  |  | 
|  | err_usbtll_p1_fck: | 
|  | clk_put(omap->usbtll_p1_fck); | 
|  |  | 
|  | err_usbhost_p1_fck: | 
|  | clk_put(omap->usbhost_p1_fck); | 
|  |  | 
|  | err_xclk60mhsp2_ck: | 
|  | clk_put(omap->xclk60mhsp2_ck); | 
|  |  | 
|  | err_utmi_p2_fck: | 
|  | clk_put(omap->utmi_p2_fck); | 
|  |  | 
|  | err_xclk60mhsp1_ck: | 
|  | clk_put(omap->xclk60mhsp1_ck); | 
|  |  | 
|  | err_utmi_p1_fck: | 
|  | clk_put(omap->utmi_p1_fck); | 
|  |  | 
|  | err_end: | 
|  | clk_put(omap->ehci_logic_fck); | 
|  | pm_runtime_disable(dev); | 
|  | kfree(omap); | 
|  |  | 
|  | end_probe: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs | 
|  | * @pdev: USB Host Controller being removed | 
|  | * | 
|  | * Reverses the effect of usbhs_omap_probe(). | 
|  | */ | 
|  | static int __devexit usbhs_omap_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); | 
|  |  | 
|  | omap_usbhs_deinit(&pdev->dev); | 
|  | iounmap(omap->tll_base); | 
|  | iounmap(omap->uhh_base); | 
|  | clk_put(omap->init_60m_fclk); | 
|  | clk_put(omap->usbtll_p2_fck); | 
|  | clk_put(omap->usbhost_p2_fck); | 
|  | clk_put(omap->usbtll_p1_fck); | 
|  | clk_put(omap->usbhost_p1_fck); | 
|  | clk_put(omap->xclk60mhsp2_ck); | 
|  | clk_put(omap->utmi_p2_fck); | 
|  | clk_put(omap->xclk60mhsp1_ck); | 
|  | clk_put(omap->utmi_p1_fck); | 
|  | clk_put(omap->ehci_logic_fck); | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | kfree(omap); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops usbhsomap_dev_pm_ops = { | 
|  | .runtime_suspend	= usbhs_runtime_suspend, | 
|  | .runtime_resume		= usbhs_runtime_resume, | 
|  | }; | 
|  |  | 
|  | static struct platform_driver usbhs_omap_driver = { | 
|  | .driver = { | 
|  | .name		= (char *)usbhs_driver_name, | 
|  | .owner		= THIS_MODULE, | 
|  | .pm		= &usbhsomap_dev_pm_ops, | 
|  | }, | 
|  | .remove		= __exit_p(usbhs_omap_remove), | 
|  | }; | 
|  |  | 
|  | MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); | 
|  | MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI"); | 
|  |  | 
|  | static int __init omap_usbhs_drvinit(void) | 
|  | { | 
|  | return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * init before ehci and ohci drivers; | 
|  | * The usbhs core driver should be initialized much before | 
|  | * the omap ehci and ohci probe functions are called. | 
|  | */ | 
|  | fs_initcall(omap_usbhs_drvinit); | 
|  |  | 
|  | static void __exit omap_usbhs_drvexit(void) | 
|  | { | 
|  | platform_driver_unregister(&usbhs_omap_driver); | 
|  | } | 
|  | module_exit(omap_usbhs_drvexit); |