| /* | 
 |  * bcm.c - Broadcast Manager to filter/send (cyclic) CAN content | 
 |  * | 
 |  * Copyright (c) 2002-2007 Volkswagen Group Electronic Research | 
 |  * All rights reserved. | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions | 
 |  * are met: | 
 |  * 1. Redistributions of source code must retain the above copyright | 
 |  *    notice, this list of conditions and the following disclaimer. | 
 |  * 2. Redistributions in binary form must reproduce the above copyright | 
 |  *    notice, this list of conditions and the following disclaimer in the | 
 |  *    documentation and/or other materials provided with the distribution. | 
 |  * 3. Neither the name of Volkswagen nor the names of its contributors | 
 |  *    may be used to endorse or promote products derived from this software | 
 |  *    without specific prior written permission. | 
 |  * | 
 |  * Alternatively, provided that this notice is retained in full, this | 
 |  * software may be distributed under the terms of the GNU General | 
 |  * Public License ("GPL") version 2, in which case the provisions of the | 
 |  * GPL apply INSTEAD OF those given above. | 
 |  * | 
 |  * The provided data structures and external interfaces from this code | 
 |  * are not restricted to be used by modules with a GPL compatible license. | 
 |  * | 
 |  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
 |  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
 |  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | 
 |  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
 |  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | 
 |  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | 
 |  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | 
 |  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | 
 |  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | 
 |  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | 
 |  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH | 
 |  * DAMAGE. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/hrtimer.h> | 
 | #include <linux/list.h> | 
 | #include <linux/proc_fs.h> | 
 | #include <linux/seq_file.h> | 
 | #include <linux/uio.h> | 
 | #include <linux/net.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/socket.h> | 
 | #include <linux/if_arp.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/can.h> | 
 | #include <linux/can/core.h> | 
 | #include <linux/can/bcm.h> | 
 | #include <linux/slab.h> | 
 | #include <net/sock.h> | 
 | #include <net/net_namespace.h> | 
 |  | 
 | /* | 
 |  * To send multiple CAN frame content within TX_SETUP or to filter | 
 |  * CAN messages with multiplex index within RX_SETUP, the number of | 
 |  * different filters is limited to 256 due to the one byte index value. | 
 |  */ | 
 | #define MAX_NFRAMES 256 | 
 |  | 
 | /* use of last_frames[index].can_dlc */ | 
 | #define RX_RECV    0x40 /* received data for this element */ | 
 | #define RX_THR     0x80 /* element not been sent due to throttle feature */ | 
 | #define BCM_CAN_DLC_MASK 0x0F /* clean private flags in can_dlc by masking */ | 
 |  | 
 | /* get best masking value for can_rx_register() for a given single can_id */ | 
 | #define REGMASK(id) ((id & CAN_EFF_FLAG) ? \ | 
 | 		     (CAN_EFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG) : \ | 
 | 		     (CAN_SFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG)) | 
 |  | 
 | #define CAN_BCM_VERSION CAN_VERSION | 
 | static __initdata const char banner[] = KERN_INFO | 
 | 	"can: broadcast manager protocol (rev " CAN_BCM_VERSION " t)\n"; | 
 |  | 
 | MODULE_DESCRIPTION("PF_CAN broadcast manager protocol"); | 
 | MODULE_LICENSE("Dual BSD/GPL"); | 
 | MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>"); | 
 | MODULE_ALIAS("can-proto-2"); | 
 |  | 
 | /* easy access to can_frame payload */ | 
 | static inline u64 GET_U64(const struct can_frame *cp) | 
 | { | 
 | 	return *(u64 *)cp->data; | 
 | } | 
 |  | 
 | struct bcm_op { | 
 | 	struct list_head list; | 
 | 	int ifindex; | 
 | 	canid_t can_id; | 
 | 	u32 flags; | 
 | 	unsigned long frames_abs, frames_filtered; | 
 | 	struct timeval ival1, ival2; | 
 | 	struct hrtimer timer, thrtimer; | 
 | 	struct tasklet_struct tsklet, thrtsklet; | 
 | 	ktime_t rx_stamp, kt_ival1, kt_ival2, kt_lastmsg; | 
 | 	int rx_ifindex; | 
 | 	u32 count; | 
 | 	u32 nframes; | 
 | 	u32 currframe; | 
 | 	struct can_frame *frames; | 
 | 	struct can_frame *last_frames; | 
 | 	struct can_frame sframe; | 
 | 	struct can_frame last_sframe; | 
 | 	struct sock *sk; | 
 | 	struct net_device *rx_reg_dev; | 
 | }; | 
 |  | 
 | static struct proc_dir_entry *proc_dir; | 
 |  | 
 | struct bcm_sock { | 
 | 	struct sock sk; | 
 | 	int bound; | 
 | 	int ifindex; | 
 | 	struct notifier_block notifier; | 
 | 	struct list_head rx_ops; | 
 | 	struct list_head tx_ops; | 
 | 	unsigned long dropped_usr_msgs; | 
 | 	struct proc_dir_entry *bcm_proc_read; | 
 | 	char procname [32]; /* inode number in decimal with \0 */ | 
 | }; | 
 |  | 
 | static inline struct bcm_sock *bcm_sk(const struct sock *sk) | 
 | { | 
 | 	return (struct bcm_sock *)sk; | 
 | } | 
 |  | 
 | #define CFSIZ sizeof(struct can_frame) | 
 | #define OPSIZ sizeof(struct bcm_op) | 
 | #define MHSIZ sizeof(struct bcm_msg_head) | 
 |  | 
 | /* | 
 |  * procfs functions | 
 |  */ | 
 | static char *bcm_proc_getifname(char *result, int ifindex) | 
 | { | 
 | 	struct net_device *dev; | 
 |  | 
 | 	if (!ifindex) | 
 | 		return "any"; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	dev = dev_get_by_index_rcu(&init_net, ifindex); | 
 | 	if (dev) | 
 | 		strcpy(result, dev->name); | 
 | 	else | 
 | 		strcpy(result, "???"); | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | static int bcm_proc_show(struct seq_file *m, void *v) | 
 | { | 
 | 	char ifname[IFNAMSIZ]; | 
 | 	struct sock *sk = (struct sock *)m->private; | 
 | 	struct bcm_sock *bo = bcm_sk(sk); | 
 | 	struct bcm_op *op; | 
 |  | 
 | 	seq_printf(m, ">>> socket %pK", sk->sk_socket); | 
 | 	seq_printf(m, " / sk %pK", sk); | 
 | 	seq_printf(m, " / bo %pK", bo); | 
 | 	seq_printf(m, " / dropped %lu", bo->dropped_usr_msgs); | 
 | 	seq_printf(m, " / bound %s", bcm_proc_getifname(ifname, bo->ifindex)); | 
 | 	seq_printf(m, " <<<\n"); | 
 |  | 
 | 	list_for_each_entry(op, &bo->rx_ops, list) { | 
 |  | 
 | 		unsigned long reduction; | 
 |  | 
 | 		/* print only active entries & prevent division by zero */ | 
 | 		if (!op->frames_abs) | 
 | 			continue; | 
 |  | 
 | 		seq_printf(m, "rx_op: %03X %-5s ", | 
 | 				op->can_id, bcm_proc_getifname(ifname, op->ifindex)); | 
 | 		seq_printf(m, "[%u]%c ", op->nframes, | 
 | 				(op->flags & RX_CHECK_DLC)?'d':' '); | 
 | 		if (op->kt_ival1.tv64) | 
 | 			seq_printf(m, "timeo=%lld ", | 
 | 					(long long) | 
 | 					ktime_to_us(op->kt_ival1)); | 
 |  | 
 | 		if (op->kt_ival2.tv64) | 
 | 			seq_printf(m, "thr=%lld ", | 
 | 					(long long) | 
 | 					ktime_to_us(op->kt_ival2)); | 
 |  | 
 | 		seq_printf(m, "# recv %ld (%ld) => reduction: ", | 
 | 				op->frames_filtered, op->frames_abs); | 
 |  | 
 | 		reduction = 100 - (op->frames_filtered * 100) / op->frames_abs; | 
 |  | 
 | 		seq_printf(m, "%s%ld%%\n", | 
 | 				(reduction == 100)?"near ":"", reduction); | 
 | 	} | 
 |  | 
 | 	list_for_each_entry(op, &bo->tx_ops, list) { | 
 |  | 
 | 		seq_printf(m, "tx_op: %03X %s [%u] ", | 
 | 				op->can_id, | 
 | 				bcm_proc_getifname(ifname, op->ifindex), | 
 | 				op->nframes); | 
 |  | 
 | 		if (op->kt_ival1.tv64) | 
 | 			seq_printf(m, "t1=%lld ", | 
 | 					(long long) ktime_to_us(op->kt_ival1)); | 
 |  | 
 | 		if (op->kt_ival2.tv64) | 
 | 			seq_printf(m, "t2=%lld ", | 
 | 					(long long) ktime_to_us(op->kt_ival2)); | 
 |  | 
 | 		seq_printf(m, "# sent %ld\n", op->frames_abs); | 
 | 	} | 
 | 	seq_putc(m, '\n'); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int bcm_proc_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	return single_open(file, bcm_proc_show, PDE(inode)->data); | 
 | } | 
 |  | 
 | static const struct file_operations bcm_proc_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.open		= bcm_proc_open, | 
 | 	.read		= seq_read, | 
 | 	.llseek		= seq_lseek, | 
 | 	.release	= single_release, | 
 | }; | 
 |  | 
 | /* | 
 |  * bcm_can_tx - send the (next) CAN frame to the appropriate CAN interface | 
 |  *              of the given bcm tx op | 
 |  */ | 
 | static void bcm_can_tx(struct bcm_op *op) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	struct net_device *dev; | 
 | 	struct can_frame *cf = &op->frames[op->currframe]; | 
 |  | 
 | 	/* no target device? => exit */ | 
 | 	if (!op->ifindex) | 
 | 		return; | 
 |  | 
 | 	dev = dev_get_by_index(&init_net, op->ifindex); | 
 | 	if (!dev) { | 
 | 		/* RFC: should this bcm_op remove itself here? */ | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	skb = alloc_skb(CFSIZ, gfp_any()); | 
 | 	if (!skb) | 
 | 		goto out; | 
 |  | 
 | 	memcpy(skb_put(skb, CFSIZ), cf, CFSIZ); | 
 |  | 
 | 	/* send with loopback */ | 
 | 	skb->dev = dev; | 
 | 	skb->sk = op->sk; | 
 | 	can_send(skb, 1); | 
 |  | 
 | 	/* update statistics */ | 
 | 	op->currframe++; | 
 | 	op->frames_abs++; | 
 |  | 
 | 	/* reached last frame? */ | 
 | 	if (op->currframe >= op->nframes) | 
 | 		op->currframe = 0; | 
 |  out: | 
 | 	dev_put(dev); | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_send_to_user - send a BCM message to the userspace | 
 |  *                    (consisting of bcm_msg_head + x CAN frames) | 
 |  */ | 
 | static void bcm_send_to_user(struct bcm_op *op, struct bcm_msg_head *head, | 
 | 			     struct can_frame *frames, int has_timestamp) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	struct can_frame *firstframe; | 
 | 	struct sockaddr_can *addr; | 
 | 	struct sock *sk = op->sk; | 
 | 	unsigned int datalen = head->nframes * CFSIZ; | 
 | 	int err; | 
 |  | 
 | 	skb = alloc_skb(sizeof(*head) + datalen, gfp_any()); | 
 | 	if (!skb) | 
 | 		return; | 
 |  | 
 | 	memcpy(skb_put(skb, sizeof(*head)), head, sizeof(*head)); | 
 |  | 
 | 	if (head->nframes) { | 
 | 		/* can_frames starting here */ | 
 | 		firstframe = (struct can_frame *)skb_tail_pointer(skb); | 
 |  | 
 | 		memcpy(skb_put(skb, datalen), frames, datalen); | 
 |  | 
 | 		/* | 
 | 		 * the BCM uses the can_dlc-element of the can_frame | 
 | 		 * structure for internal purposes. This is only | 
 | 		 * relevant for updates that are generated by the | 
 | 		 * BCM, where nframes is 1 | 
 | 		 */ | 
 | 		if (head->nframes == 1) | 
 | 			firstframe->can_dlc &= BCM_CAN_DLC_MASK; | 
 | 	} | 
 |  | 
 | 	if (has_timestamp) { | 
 | 		/* restore rx timestamp */ | 
 | 		skb->tstamp = op->rx_stamp; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 *  Put the datagram to the queue so that bcm_recvmsg() can | 
 | 	 *  get it from there.  We need to pass the interface index to | 
 | 	 *  bcm_recvmsg().  We pass a whole struct sockaddr_can in skb->cb | 
 | 	 *  containing the interface index. | 
 | 	 */ | 
 |  | 
 | 	BUILD_BUG_ON(sizeof(skb->cb) < sizeof(struct sockaddr_can)); | 
 | 	addr = (struct sockaddr_can *)skb->cb; | 
 | 	memset(addr, 0, sizeof(*addr)); | 
 | 	addr->can_family  = AF_CAN; | 
 | 	addr->can_ifindex = op->rx_ifindex; | 
 |  | 
 | 	err = sock_queue_rcv_skb(sk, skb); | 
 | 	if (err < 0) { | 
 | 		struct bcm_sock *bo = bcm_sk(sk); | 
 |  | 
 | 		kfree_skb(skb); | 
 | 		/* don't care about overflows in this statistic */ | 
 | 		bo->dropped_usr_msgs++; | 
 | 	} | 
 | } | 
 |  | 
 | static void bcm_tx_start_timer(struct bcm_op *op) | 
 | { | 
 | 	if (op->kt_ival1.tv64 && op->count) | 
 | 		hrtimer_start(&op->timer, | 
 | 			      ktime_add(ktime_get(), op->kt_ival1), | 
 | 			      HRTIMER_MODE_ABS); | 
 | 	else if (op->kt_ival2.tv64) | 
 | 		hrtimer_start(&op->timer, | 
 | 			      ktime_add(ktime_get(), op->kt_ival2), | 
 | 			      HRTIMER_MODE_ABS); | 
 | } | 
 |  | 
 | static void bcm_tx_timeout_tsklet(unsigned long data) | 
 | { | 
 | 	struct bcm_op *op = (struct bcm_op *)data; | 
 | 	struct bcm_msg_head msg_head; | 
 |  | 
 | 	if (op->kt_ival1.tv64 && (op->count > 0)) { | 
 |  | 
 | 		op->count--; | 
 | 		if (!op->count && (op->flags & TX_COUNTEVT)) { | 
 |  | 
 | 			/* create notification to user */ | 
 | 			msg_head.opcode  = TX_EXPIRED; | 
 | 			msg_head.flags   = op->flags; | 
 | 			msg_head.count   = op->count; | 
 | 			msg_head.ival1   = op->ival1; | 
 | 			msg_head.ival2   = op->ival2; | 
 | 			msg_head.can_id  = op->can_id; | 
 | 			msg_head.nframes = 0; | 
 |  | 
 | 			bcm_send_to_user(op, &msg_head, NULL, 0); | 
 | 		} | 
 | 		bcm_can_tx(op); | 
 |  | 
 | 	} else if (op->kt_ival2.tv64) | 
 | 		bcm_can_tx(op); | 
 |  | 
 | 	bcm_tx_start_timer(op); | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_tx_timeout_handler - performs cyclic CAN frame transmissions | 
 |  */ | 
 | static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer) | 
 | { | 
 | 	struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer); | 
 |  | 
 | 	tasklet_schedule(&op->tsklet); | 
 |  | 
 | 	return HRTIMER_NORESTART; | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_rx_changed - create a RX_CHANGED notification due to changed content | 
 |  */ | 
 | static void bcm_rx_changed(struct bcm_op *op, struct can_frame *data) | 
 | { | 
 | 	struct bcm_msg_head head; | 
 |  | 
 | 	/* update statistics */ | 
 | 	op->frames_filtered++; | 
 |  | 
 | 	/* prevent statistics overflow */ | 
 | 	if (op->frames_filtered > ULONG_MAX/100) | 
 | 		op->frames_filtered = op->frames_abs = 0; | 
 |  | 
 | 	/* this element is not throttled anymore */ | 
 | 	data->can_dlc &= (BCM_CAN_DLC_MASK|RX_RECV); | 
 |  | 
 | 	head.opcode  = RX_CHANGED; | 
 | 	head.flags   = op->flags; | 
 | 	head.count   = op->count; | 
 | 	head.ival1   = op->ival1; | 
 | 	head.ival2   = op->ival2; | 
 | 	head.can_id  = op->can_id; | 
 | 	head.nframes = 1; | 
 |  | 
 | 	bcm_send_to_user(op, &head, data, 1); | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_rx_update_and_send - process a detected relevant receive content change | 
 |  *                          1. update the last received data | 
 |  *                          2. send a notification to the user (if possible) | 
 |  */ | 
 | static void bcm_rx_update_and_send(struct bcm_op *op, | 
 | 				   struct can_frame *lastdata, | 
 | 				   const struct can_frame *rxdata) | 
 | { | 
 | 	memcpy(lastdata, rxdata, CFSIZ); | 
 |  | 
 | 	/* mark as used and throttled by default */ | 
 | 	lastdata->can_dlc |= (RX_RECV|RX_THR); | 
 |  | 
 | 	/* throtteling mode inactive ? */ | 
 | 	if (!op->kt_ival2.tv64) { | 
 | 		/* send RX_CHANGED to the user immediately */ | 
 | 		bcm_rx_changed(op, lastdata); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* with active throttling timer we are just done here */ | 
 | 	if (hrtimer_active(&op->thrtimer)) | 
 | 		return; | 
 |  | 
 | 	/* first receiption with enabled throttling mode */ | 
 | 	if (!op->kt_lastmsg.tv64) | 
 | 		goto rx_changed_settime; | 
 |  | 
 | 	/* got a second frame inside a potential throttle period? */ | 
 | 	if (ktime_us_delta(ktime_get(), op->kt_lastmsg) < | 
 | 	    ktime_to_us(op->kt_ival2)) { | 
 | 		/* do not send the saved data - only start throttle timer */ | 
 | 		hrtimer_start(&op->thrtimer, | 
 | 			      ktime_add(op->kt_lastmsg, op->kt_ival2), | 
 | 			      HRTIMER_MODE_ABS); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* the gap was that big, that throttling was not needed here */ | 
 | rx_changed_settime: | 
 | 	bcm_rx_changed(op, lastdata); | 
 | 	op->kt_lastmsg = ktime_get(); | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_rx_cmp_to_index - (bit)compares the currently received data to formerly | 
 |  *                       received data stored in op->last_frames[] | 
 |  */ | 
 | static void bcm_rx_cmp_to_index(struct bcm_op *op, unsigned int index, | 
 | 				const struct can_frame *rxdata) | 
 | { | 
 | 	/* | 
 | 	 * no one uses the MSBs of can_dlc for comparation, | 
 | 	 * so we use it here to detect the first time of reception | 
 | 	 */ | 
 |  | 
 | 	if (!(op->last_frames[index].can_dlc & RX_RECV)) { | 
 | 		/* received data for the first time => send update to user */ | 
 | 		bcm_rx_update_and_send(op, &op->last_frames[index], rxdata); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* do a real check in can_frame data section */ | 
 |  | 
 | 	if ((GET_U64(&op->frames[index]) & GET_U64(rxdata)) != | 
 | 	    (GET_U64(&op->frames[index]) & GET_U64(&op->last_frames[index]))) { | 
 | 		bcm_rx_update_and_send(op, &op->last_frames[index], rxdata); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (op->flags & RX_CHECK_DLC) { | 
 | 		/* do a real check in can_frame dlc */ | 
 | 		if (rxdata->can_dlc != (op->last_frames[index].can_dlc & | 
 | 					BCM_CAN_DLC_MASK)) { | 
 | 			bcm_rx_update_and_send(op, &op->last_frames[index], | 
 | 					       rxdata); | 
 | 			return; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_rx_starttimer - enable timeout monitoring for CAN frame receiption | 
 |  */ | 
 | static void bcm_rx_starttimer(struct bcm_op *op) | 
 | { | 
 | 	if (op->flags & RX_NO_AUTOTIMER) | 
 | 		return; | 
 |  | 
 | 	if (op->kt_ival1.tv64) | 
 | 		hrtimer_start(&op->timer, op->kt_ival1, HRTIMER_MODE_REL); | 
 | } | 
 |  | 
 | static void bcm_rx_timeout_tsklet(unsigned long data) | 
 | { | 
 | 	struct bcm_op *op = (struct bcm_op *)data; | 
 | 	struct bcm_msg_head msg_head; | 
 |  | 
 | 	/* create notification to user */ | 
 | 	msg_head.opcode  = RX_TIMEOUT; | 
 | 	msg_head.flags   = op->flags; | 
 | 	msg_head.count   = op->count; | 
 | 	msg_head.ival1   = op->ival1; | 
 | 	msg_head.ival2   = op->ival2; | 
 | 	msg_head.can_id  = op->can_id; | 
 | 	msg_head.nframes = 0; | 
 |  | 
 | 	bcm_send_to_user(op, &msg_head, NULL, 0); | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_rx_timeout_handler - when the (cyclic) CAN frame receiption timed out | 
 |  */ | 
 | static enum hrtimer_restart bcm_rx_timeout_handler(struct hrtimer *hrtimer) | 
 | { | 
 | 	struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer); | 
 |  | 
 | 	/* schedule before NET_RX_SOFTIRQ */ | 
 | 	tasklet_hi_schedule(&op->tsklet); | 
 |  | 
 | 	/* no restart of the timer is done here! */ | 
 |  | 
 | 	/* if user wants to be informed, when cyclic CAN-Messages come back */ | 
 | 	if ((op->flags & RX_ANNOUNCE_RESUME) && op->last_frames) { | 
 | 		/* clear received can_frames to indicate 'nothing received' */ | 
 | 		memset(op->last_frames, 0, op->nframes * CFSIZ); | 
 | 	} | 
 |  | 
 | 	return HRTIMER_NORESTART; | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_rx_do_flush - helper for bcm_rx_thr_flush | 
 |  */ | 
 | static inline int bcm_rx_do_flush(struct bcm_op *op, int update, | 
 | 				  unsigned int index) | 
 | { | 
 | 	if ((op->last_frames) && (op->last_frames[index].can_dlc & RX_THR)) { | 
 | 		if (update) | 
 | 			bcm_rx_changed(op, &op->last_frames[index]); | 
 | 		return 1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_rx_thr_flush - Check for throttled data and send it to the userspace | 
 |  * | 
 |  * update == 0 : just check if throttled data is available  (any irq context) | 
 |  * update == 1 : check and send throttled data to userspace (soft_irq context) | 
 |  */ | 
 | static int bcm_rx_thr_flush(struct bcm_op *op, int update) | 
 | { | 
 | 	int updated = 0; | 
 |  | 
 | 	if (op->nframes > 1) { | 
 | 		unsigned int i; | 
 |  | 
 | 		/* for MUX filter we start at index 1 */ | 
 | 		for (i = 1; i < op->nframes; i++) | 
 | 			updated += bcm_rx_do_flush(op, update, i); | 
 |  | 
 | 	} else { | 
 | 		/* for RX_FILTER_ID and simple filter */ | 
 | 		updated += bcm_rx_do_flush(op, update, 0); | 
 | 	} | 
 |  | 
 | 	return updated; | 
 | } | 
 |  | 
 | static void bcm_rx_thr_tsklet(unsigned long data) | 
 | { | 
 | 	struct bcm_op *op = (struct bcm_op *)data; | 
 |  | 
 | 	/* push the changed data to the userspace */ | 
 | 	bcm_rx_thr_flush(op, 1); | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_rx_thr_handler - the time for blocked content updates is over now: | 
 |  *                      Check for throttled data and send it to the userspace | 
 |  */ | 
 | static enum hrtimer_restart bcm_rx_thr_handler(struct hrtimer *hrtimer) | 
 | { | 
 | 	struct bcm_op *op = container_of(hrtimer, struct bcm_op, thrtimer); | 
 |  | 
 | 	tasklet_schedule(&op->thrtsklet); | 
 |  | 
 | 	if (bcm_rx_thr_flush(op, 0)) { | 
 | 		hrtimer_forward(hrtimer, ktime_get(), op->kt_ival2); | 
 | 		return HRTIMER_RESTART; | 
 | 	} else { | 
 | 		/* rearm throttle handling */ | 
 | 		op->kt_lastmsg = ktime_set(0, 0); | 
 | 		return HRTIMER_NORESTART; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_rx_handler - handle a CAN frame receiption | 
 |  */ | 
 | static void bcm_rx_handler(struct sk_buff *skb, void *data) | 
 | { | 
 | 	struct bcm_op *op = (struct bcm_op *)data; | 
 | 	const struct can_frame *rxframe = (struct can_frame *)skb->data; | 
 | 	unsigned int i; | 
 |  | 
 | 	/* disable timeout */ | 
 | 	hrtimer_cancel(&op->timer); | 
 |  | 
 | 	if (op->can_id != rxframe->can_id) | 
 | 		return; | 
 |  | 
 | 	/* save rx timestamp */ | 
 | 	op->rx_stamp = skb->tstamp; | 
 | 	/* save originator for recvfrom() */ | 
 | 	op->rx_ifindex = skb->dev->ifindex; | 
 | 	/* update statistics */ | 
 | 	op->frames_abs++; | 
 |  | 
 | 	if (op->flags & RX_RTR_FRAME) { | 
 | 		/* send reply for RTR-request (placed in op->frames[0]) */ | 
 | 		bcm_can_tx(op); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (op->flags & RX_FILTER_ID) { | 
 | 		/* the easiest case */ | 
 | 		bcm_rx_update_and_send(op, &op->last_frames[0], rxframe); | 
 | 		goto rx_starttimer; | 
 | 	} | 
 |  | 
 | 	if (op->nframes == 1) { | 
 | 		/* simple compare with index 0 */ | 
 | 		bcm_rx_cmp_to_index(op, 0, rxframe); | 
 | 		goto rx_starttimer; | 
 | 	} | 
 |  | 
 | 	if (op->nframes > 1) { | 
 | 		/* | 
 | 		 * multiplex compare | 
 | 		 * | 
 | 		 * find the first multiplex mask that fits. | 
 | 		 * Remark: The MUX-mask is stored in index 0 | 
 | 		 */ | 
 |  | 
 | 		for (i = 1; i < op->nframes; i++) { | 
 | 			if ((GET_U64(&op->frames[0]) & GET_U64(rxframe)) == | 
 | 			    (GET_U64(&op->frames[0]) & | 
 | 			     GET_U64(&op->frames[i]))) { | 
 | 				bcm_rx_cmp_to_index(op, i, rxframe); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | rx_starttimer: | 
 | 	bcm_rx_starttimer(op); | 
 | } | 
 |  | 
 | /* | 
 |  * helpers for bcm_op handling: find & delete bcm [rx|tx] op elements | 
 |  */ | 
 | static struct bcm_op *bcm_find_op(struct list_head *ops, canid_t can_id, | 
 | 				  int ifindex) | 
 | { | 
 | 	struct bcm_op *op; | 
 |  | 
 | 	list_for_each_entry(op, ops, list) { | 
 | 		if ((op->can_id == can_id) && (op->ifindex == ifindex)) | 
 | 			return op; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static void bcm_remove_op(struct bcm_op *op) | 
 | { | 
 | 	hrtimer_cancel(&op->timer); | 
 | 	hrtimer_cancel(&op->thrtimer); | 
 |  | 
 | 	if (op->tsklet.func) | 
 | 		tasklet_kill(&op->tsklet); | 
 |  | 
 | 	if (op->thrtsklet.func) | 
 | 		tasklet_kill(&op->thrtsklet); | 
 |  | 
 | 	if ((op->frames) && (op->frames != &op->sframe)) | 
 | 		kfree(op->frames); | 
 |  | 
 | 	if ((op->last_frames) && (op->last_frames != &op->last_sframe)) | 
 | 		kfree(op->last_frames); | 
 |  | 
 | 	kfree(op); | 
 | } | 
 |  | 
 | static void bcm_rx_unreg(struct net_device *dev, struct bcm_op *op) | 
 | { | 
 | 	if (op->rx_reg_dev == dev) { | 
 | 		can_rx_unregister(dev, op->can_id, REGMASK(op->can_id), | 
 | 				  bcm_rx_handler, op); | 
 |  | 
 | 		/* mark as removed subscription */ | 
 | 		op->rx_reg_dev = NULL; | 
 | 	} else | 
 | 		printk(KERN_ERR "can-bcm: bcm_rx_unreg: registered device " | 
 | 		       "mismatch %p %p\n", op->rx_reg_dev, dev); | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_delete_rx_op - find and remove a rx op (returns number of removed ops) | 
 |  */ | 
 | static int bcm_delete_rx_op(struct list_head *ops, canid_t can_id, int ifindex) | 
 | { | 
 | 	struct bcm_op *op, *n; | 
 |  | 
 | 	list_for_each_entry_safe(op, n, ops, list) { | 
 | 		if ((op->can_id == can_id) && (op->ifindex == ifindex)) { | 
 |  | 
 | 			/* | 
 | 			 * Don't care if we're bound or not (due to netdev | 
 | 			 * problems) can_rx_unregister() is always a save | 
 | 			 * thing to do here. | 
 | 			 */ | 
 | 			if (op->ifindex) { | 
 | 				/* | 
 | 				 * Only remove subscriptions that had not | 
 | 				 * been removed due to NETDEV_UNREGISTER | 
 | 				 * in bcm_notifier() | 
 | 				 */ | 
 | 				if (op->rx_reg_dev) { | 
 | 					struct net_device *dev; | 
 |  | 
 | 					dev = dev_get_by_index(&init_net, | 
 | 							       op->ifindex); | 
 | 					if (dev) { | 
 | 						bcm_rx_unreg(dev, op); | 
 | 						dev_put(dev); | 
 | 					} | 
 | 				} | 
 | 			} else | 
 | 				can_rx_unregister(NULL, op->can_id, | 
 | 						  REGMASK(op->can_id), | 
 | 						  bcm_rx_handler, op); | 
 |  | 
 | 			list_del(&op->list); | 
 | 			bcm_remove_op(op); | 
 | 			return 1; /* done */ | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; /* not found */ | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_delete_tx_op - find and remove a tx op (returns number of removed ops) | 
 |  */ | 
 | static int bcm_delete_tx_op(struct list_head *ops, canid_t can_id, int ifindex) | 
 | { | 
 | 	struct bcm_op *op, *n; | 
 |  | 
 | 	list_for_each_entry_safe(op, n, ops, list) { | 
 | 		if ((op->can_id == can_id) && (op->ifindex == ifindex)) { | 
 | 			list_del(&op->list); | 
 | 			bcm_remove_op(op); | 
 | 			return 1; /* done */ | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; /* not found */ | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_read_op - read out a bcm_op and send it to the user (for bcm_sendmsg) | 
 |  */ | 
 | static int bcm_read_op(struct list_head *ops, struct bcm_msg_head *msg_head, | 
 | 		       int ifindex) | 
 | { | 
 | 	struct bcm_op *op = bcm_find_op(ops, msg_head->can_id, ifindex); | 
 |  | 
 | 	if (!op) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* put current values into msg_head */ | 
 | 	msg_head->flags   = op->flags; | 
 | 	msg_head->count   = op->count; | 
 | 	msg_head->ival1   = op->ival1; | 
 | 	msg_head->ival2   = op->ival2; | 
 | 	msg_head->nframes = op->nframes; | 
 |  | 
 | 	bcm_send_to_user(op, msg_head, op->frames, 0); | 
 |  | 
 | 	return MHSIZ; | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_tx_setup - create or update a bcm tx op (for bcm_sendmsg) | 
 |  */ | 
 | static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, | 
 | 			int ifindex, struct sock *sk) | 
 | { | 
 | 	struct bcm_sock *bo = bcm_sk(sk); | 
 | 	struct bcm_op *op; | 
 | 	unsigned int i; | 
 | 	int err; | 
 |  | 
 | 	/* we need a real device to send frames */ | 
 | 	if (!ifindex) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* check nframes boundaries - we need at least one can_frame */ | 
 | 	if (msg_head->nframes < 1 || msg_head->nframes > MAX_NFRAMES) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* check the given can_id */ | 
 | 	op = bcm_find_op(&bo->tx_ops, msg_head->can_id, ifindex); | 
 |  | 
 | 	if (op) { | 
 | 		/* update existing BCM operation */ | 
 |  | 
 | 		/* | 
 | 		 * Do we need more space for the can_frames than currently | 
 | 		 * allocated? -> This is a _really_ unusual use-case and | 
 | 		 * therefore (complexity / locking) it is not supported. | 
 | 		 */ | 
 | 		if (msg_head->nframes > op->nframes) | 
 | 			return -E2BIG; | 
 |  | 
 | 		/* update can_frames content */ | 
 | 		for (i = 0; i < msg_head->nframes; i++) { | 
 | 			err = memcpy_fromiovec((u8 *)&op->frames[i], | 
 | 					       msg->msg_iov, CFSIZ); | 
 |  | 
 | 			if (op->frames[i].can_dlc > 8) | 
 | 				err = -EINVAL; | 
 |  | 
 | 			if (err < 0) | 
 | 				return err; | 
 |  | 
 | 			if (msg_head->flags & TX_CP_CAN_ID) { | 
 | 				/* copy can_id into frame */ | 
 | 				op->frames[i].can_id = msg_head->can_id; | 
 | 			} | 
 | 		} | 
 |  | 
 | 	} else { | 
 | 		/* insert new BCM operation for the given can_id */ | 
 |  | 
 | 		op = kzalloc(OPSIZ, GFP_KERNEL); | 
 | 		if (!op) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		op->can_id    = msg_head->can_id; | 
 |  | 
 | 		/* create array for can_frames and copy the data */ | 
 | 		if (msg_head->nframes > 1) { | 
 | 			op->frames = kmalloc(msg_head->nframes * CFSIZ, | 
 | 					     GFP_KERNEL); | 
 | 			if (!op->frames) { | 
 | 				kfree(op); | 
 | 				return -ENOMEM; | 
 | 			} | 
 | 		} else | 
 | 			op->frames = &op->sframe; | 
 |  | 
 | 		for (i = 0; i < msg_head->nframes; i++) { | 
 | 			err = memcpy_fromiovec((u8 *)&op->frames[i], | 
 | 					       msg->msg_iov, CFSIZ); | 
 |  | 
 | 			if (op->frames[i].can_dlc > 8) | 
 | 				err = -EINVAL; | 
 |  | 
 | 			if (err < 0) { | 
 | 				if (op->frames != &op->sframe) | 
 | 					kfree(op->frames); | 
 | 				kfree(op); | 
 | 				return err; | 
 | 			} | 
 |  | 
 | 			if (msg_head->flags & TX_CP_CAN_ID) { | 
 | 				/* copy can_id into frame */ | 
 | 				op->frames[i].can_id = msg_head->can_id; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* tx_ops never compare with previous received messages */ | 
 | 		op->last_frames = NULL; | 
 |  | 
 | 		/* bcm_can_tx / bcm_tx_timeout_handler needs this */ | 
 | 		op->sk = sk; | 
 | 		op->ifindex = ifindex; | 
 |  | 
 | 		/* initialize uninitialized (kzalloc) structure */ | 
 | 		hrtimer_init(&op->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); | 
 | 		op->timer.function = bcm_tx_timeout_handler; | 
 |  | 
 | 		/* initialize tasklet for tx countevent notification */ | 
 | 		tasklet_init(&op->tsklet, bcm_tx_timeout_tsklet, | 
 | 			     (unsigned long) op); | 
 |  | 
 | 		/* currently unused in tx_ops */ | 
 | 		hrtimer_init(&op->thrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); | 
 |  | 
 | 		/* add this bcm_op to the list of the tx_ops */ | 
 | 		list_add(&op->list, &bo->tx_ops); | 
 |  | 
 | 	} /* if ((op = bcm_find_op(&bo->tx_ops, msg_head->can_id, ifindex))) */ | 
 |  | 
 | 	if (op->nframes != msg_head->nframes) { | 
 | 		op->nframes   = msg_head->nframes; | 
 | 		/* start multiple frame transmission with index 0 */ | 
 | 		op->currframe = 0; | 
 | 	} | 
 |  | 
 | 	/* check flags */ | 
 |  | 
 | 	op->flags = msg_head->flags; | 
 |  | 
 | 	if (op->flags & TX_RESET_MULTI_IDX) { | 
 | 		/* start multiple frame transmission with index 0 */ | 
 | 		op->currframe = 0; | 
 | 	} | 
 |  | 
 | 	if (op->flags & SETTIMER) { | 
 | 		/* set timer values */ | 
 | 		op->count = msg_head->count; | 
 | 		op->ival1 = msg_head->ival1; | 
 | 		op->ival2 = msg_head->ival2; | 
 | 		op->kt_ival1 = timeval_to_ktime(msg_head->ival1); | 
 | 		op->kt_ival2 = timeval_to_ktime(msg_head->ival2); | 
 |  | 
 | 		/* disable an active timer due to zero values? */ | 
 | 		if (!op->kt_ival1.tv64 && !op->kt_ival2.tv64) | 
 | 			hrtimer_cancel(&op->timer); | 
 | 	} | 
 |  | 
 | 	if (op->flags & STARTTIMER) { | 
 | 		hrtimer_cancel(&op->timer); | 
 | 		/* spec: send can_frame when starting timer */ | 
 | 		op->flags |= TX_ANNOUNCE; | 
 | 	} | 
 |  | 
 | 	if (op->flags & TX_ANNOUNCE) { | 
 | 		bcm_can_tx(op); | 
 | 		if (op->count) | 
 | 			op->count--; | 
 | 	} | 
 |  | 
 | 	if (op->flags & STARTTIMER) | 
 | 		bcm_tx_start_timer(op); | 
 |  | 
 | 	return msg_head->nframes * CFSIZ + MHSIZ; | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_rx_setup - create or update a bcm rx op (for bcm_sendmsg) | 
 |  */ | 
 | static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, | 
 | 			int ifindex, struct sock *sk) | 
 | { | 
 | 	struct bcm_sock *bo = bcm_sk(sk); | 
 | 	struct bcm_op *op; | 
 | 	int do_rx_register; | 
 | 	int err = 0; | 
 |  | 
 | 	if ((msg_head->flags & RX_FILTER_ID) || (!(msg_head->nframes))) { | 
 | 		/* be robust against wrong usage ... */ | 
 | 		msg_head->flags |= RX_FILTER_ID; | 
 | 		/* ignore trailing garbage */ | 
 | 		msg_head->nframes = 0; | 
 | 	} | 
 |  | 
 | 	/* the first element contains the mux-mask => MAX_NFRAMES + 1  */ | 
 | 	if (msg_head->nframes > MAX_NFRAMES + 1) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if ((msg_head->flags & RX_RTR_FRAME) && | 
 | 	    ((msg_head->nframes != 1) || | 
 | 	     (!(msg_head->can_id & CAN_RTR_FLAG)))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* check the given can_id */ | 
 | 	op = bcm_find_op(&bo->rx_ops, msg_head->can_id, ifindex); | 
 | 	if (op) { | 
 | 		/* update existing BCM operation */ | 
 |  | 
 | 		/* | 
 | 		 * Do we need more space for the can_frames than currently | 
 | 		 * allocated? -> This is a _really_ unusual use-case and | 
 | 		 * therefore (complexity / locking) it is not supported. | 
 | 		 */ | 
 | 		if (msg_head->nframes > op->nframes) | 
 | 			return -E2BIG; | 
 |  | 
 | 		if (msg_head->nframes) { | 
 | 			/* update can_frames content */ | 
 | 			err = memcpy_fromiovec((u8 *)op->frames, | 
 | 					       msg->msg_iov, | 
 | 					       msg_head->nframes * CFSIZ); | 
 | 			if (err < 0) | 
 | 				return err; | 
 |  | 
 | 			/* clear last_frames to indicate 'nothing received' */ | 
 | 			memset(op->last_frames, 0, msg_head->nframes * CFSIZ); | 
 | 		} | 
 |  | 
 | 		op->nframes = msg_head->nframes; | 
 |  | 
 | 		/* Only an update -> do not call can_rx_register() */ | 
 | 		do_rx_register = 0; | 
 |  | 
 | 	} else { | 
 | 		/* insert new BCM operation for the given can_id */ | 
 | 		op = kzalloc(OPSIZ, GFP_KERNEL); | 
 | 		if (!op) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		op->can_id    = msg_head->can_id; | 
 | 		op->nframes   = msg_head->nframes; | 
 |  | 
 | 		if (msg_head->nframes > 1) { | 
 | 			/* create array for can_frames and copy the data */ | 
 | 			op->frames = kmalloc(msg_head->nframes * CFSIZ, | 
 | 					     GFP_KERNEL); | 
 | 			if (!op->frames) { | 
 | 				kfree(op); | 
 | 				return -ENOMEM; | 
 | 			} | 
 |  | 
 | 			/* create and init array for received can_frames */ | 
 | 			op->last_frames = kzalloc(msg_head->nframes * CFSIZ, | 
 | 						  GFP_KERNEL); | 
 | 			if (!op->last_frames) { | 
 | 				kfree(op->frames); | 
 | 				kfree(op); | 
 | 				return -ENOMEM; | 
 | 			} | 
 |  | 
 | 		} else { | 
 | 			op->frames = &op->sframe; | 
 | 			op->last_frames = &op->last_sframe; | 
 | 		} | 
 |  | 
 | 		if (msg_head->nframes) { | 
 | 			err = memcpy_fromiovec((u8 *)op->frames, msg->msg_iov, | 
 | 					       msg_head->nframes * CFSIZ); | 
 | 			if (err < 0) { | 
 | 				if (op->frames != &op->sframe) | 
 | 					kfree(op->frames); | 
 | 				if (op->last_frames != &op->last_sframe) | 
 | 					kfree(op->last_frames); | 
 | 				kfree(op); | 
 | 				return err; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* bcm_can_tx / bcm_tx_timeout_handler needs this */ | 
 | 		op->sk = sk; | 
 | 		op->ifindex = ifindex; | 
 |  | 
 | 		/* initialize uninitialized (kzalloc) structure */ | 
 | 		hrtimer_init(&op->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); | 
 | 		op->timer.function = bcm_rx_timeout_handler; | 
 |  | 
 | 		/* initialize tasklet for rx timeout notification */ | 
 | 		tasklet_init(&op->tsklet, bcm_rx_timeout_tsklet, | 
 | 			     (unsigned long) op); | 
 |  | 
 | 		hrtimer_init(&op->thrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); | 
 | 		op->thrtimer.function = bcm_rx_thr_handler; | 
 |  | 
 | 		/* initialize tasklet for rx throttle handling */ | 
 | 		tasklet_init(&op->thrtsklet, bcm_rx_thr_tsklet, | 
 | 			     (unsigned long) op); | 
 |  | 
 | 		/* add this bcm_op to the list of the rx_ops */ | 
 | 		list_add(&op->list, &bo->rx_ops); | 
 |  | 
 | 		/* call can_rx_register() */ | 
 | 		do_rx_register = 1; | 
 |  | 
 | 	} /* if ((op = bcm_find_op(&bo->rx_ops, msg_head->can_id, ifindex))) */ | 
 |  | 
 | 	/* check flags */ | 
 | 	op->flags = msg_head->flags; | 
 |  | 
 | 	if (op->flags & RX_RTR_FRAME) { | 
 |  | 
 | 		/* no timers in RTR-mode */ | 
 | 		hrtimer_cancel(&op->thrtimer); | 
 | 		hrtimer_cancel(&op->timer); | 
 |  | 
 | 		/* | 
 | 		 * funny feature in RX(!)_SETUP only for RTR-mode: | 
 | 		 * copy can_id into frame BUT without RTR-flag to | 
 | 		 * prevent a full-load-loopback-test ... ;-] | 
 | 		 */ | 
 | 		if ((op->flags & TX_CP_CAN_ID) || | 
 | 		    (op->frames[0].can_id == op->can_id)) | 
 | 			op->frames[0].can_id = op->can_id & ~CAN_RTR_FLAG; | 
 |  | 
 | 	} else { | 
 | 		if (op->flags & SETTIMER) { | 
 |  | 
 | 			/* set timer value */ | 
 | 			op->ival1 = msg_head->ival1; | 
 | 			op->ival2 = msg_head->ival2; | 
 | 			op->kt_ival1 = timeval_to_ktime(msg_head->ival1); | 
 | 			op->kt_ival2 = timeval_to_ktime(msg_head->ival2); | 
 |  | 
 | 			/* disable an active timer due to zero value? */ | 
 | 			if (!op->kt_ival1.tv64) | 
 | 				hrtimer_cancel(&op->timer); | 
 |  | 
 | 			/* | 
 | 			 * In any case cancel the throttle timer, flush | 
 | 			 * potentially blocked msgs and reset throttle handling | 
 | 			 */ | 
 | 			op->kt_lastmsg = ktime_set(0, 0); | 
 | 			hrtimer_cancel(&op->thrtimer); | 
 | 			bcm_rx_thr_flush(op, 1); | 
 | 		} | 
 |  | 
 | 		if ((op->flags & STARTTIMER) && op->kt_ival1.tv64) | 
 | 			hrtimer_start(&op->timer, op->kt_ival1, | 
 | 				      HRTIMER_MODE_REL); | 
 | 	} | 
 |  | 
 | 	/* now we can register for can_ids, if we added a new bcm_op */ | 
 | 	if (do_rx_register) { | 
 | 		if (ifindex) { | 
 | 			struct net_device *dev; | 
 |  | 
 | 			dev = dev_get_by_index(&init_net, ifindex); | 
 | 			if (dev) { | 
 | 				err = can_rx_register(dev, op->can_id, | 
 | 						      REGMASK(op->can_id), | 
 | 						      bcm_rx_handler, op, | 
 | 						      "bcm"); | 
 |  | 
 | 				op->rx_reg_dev = dev; | 
 | 				dev_put(dev); | 
 | 			} | 
 |  | 
 | 		} else | 
 | 			err = can_rx_register(NULL, op->can_id, | 
 | 					      REGMASK(op->can_id), | 
 | 					      bcm_rx_handler, op, "bcm"); | 
 | 		if (err) { | 
 | 			/* this bcm rx op is broken -> remove it */ | 
 | 			list_del(&op->list); | 
 | 			bcm_remove_op(op); | 
 | 			return err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return msg_head->nframes * CFSIZ + MHSIZ; | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_tx_send - send a single CAN frame to the CAN interface (for bcm_sendmsg) | 
 |  */ | 
 | static int bcm_tx_send(struct msghdr *msg, int ifindex, struct sock *sk) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	struct net_device *dev; | 
 | 	int err; | 
 |  | 
 | 	/* we need a real device to send frames */ | 
 | 	if (!ifindex) | 
 | 		return -ENODEV; | 
 |  | 
 | 	skb = alloc_skb(CFSIZ, GFP_KERNEL); | 
 |  | 
 | 	if (!skb) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	err = memcpy_fromiovec(skb_put(skb, CFSIZ), msg->msg_iov, CFSIZ); | 
 | 	if (err < 0) { | 
 | 		kfree_skb(skb); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	dev = dev_get_by_index(&init_net, ifindex); | 
 | 	if (!dev) { | 
 | 		kfree_skb(skb); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	skb->dev = dev; | 
 | 	skb->sk  = sk; | 
 | 	err = can_send(skb, 1); /* send with loopback */ | 
 | 	dev_put(dev); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	return CFSIZ + MHSIZ; | 
 | } | 
 |  | 
 | /* | 
 |  * bcm_sendmsg - process BCM commands (opcodes) from the userspace | 
 |  */ | 
 | static int bcm_sendmsg(struct kiocb *iocb, struct socket *sock, | 
 | 		       struct msghdr *msg, size_t size) | 
 | { | 
 | 	struct sock *sk = sock->sk; | 
 | 	struct bcm_sock *bo = bcm_sk(sk); | 
 | 	int ifindex = bo->ifindex; /* default ifindex for this bcm_op */ | 
 | 	struct bcm_msg_head msg_head; | 
 | 	int ret; /* read bytes or error codes as return value */ | 
 |  | 
 | 	if (!bo->bound) | 
 | 		return -ENOTCONN; | 
 |  | 
 | 	/* check for valid message length from userspace */ | 
 | 	if (size < MHSIZ || (size - MHSIZ) % CFSIZ) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* check for alternative ifindex for this bcm_op */ | 
 |  | 
 | 	if (!ifindex && msg->msg_name) { | 
 | 		/* no bound device as default => check msg_name */ | 
 | 		struct sockaddr_can *addr = | 
 | 			(struct sockaddr_can *)msg->msg_name; | 
 |  | 
 | 		if (msg->msg_namelen < sizeof(*addr)) | 
 | 			return -EINVAL; | 
 |  | 
 | 		if (addr->can_family != AF_CAN) | 
 | 			return -EINVAL; | 
 |  | 
 | 		/* ifindex from sendto() */ | 
 | 		ifindex = addr->can_ifindex; | 
 |  | 
 | 		if (ifindex) { | 
 | 			struct net_device *dev; | 
 |  | 
 | 			dev = dev_get_by_index(&init_net, ifindex); | 
 | 			if (!dev) | 
 | 				return -ENODEV; | 
 |  | 
 | 			if (dev->type != ARPHRD_CAN) { | 
 | 				dev_put(dev); | 
 | 				return -ENODEV; | 
 | 			} | 
 |  | 
 | 			dev_put(dev); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* read message head information */ | 
 |  | 
 | 	ret = memcpy_fromiovec((u8 *)&msg_head, msg->msg_iov, MHSIZ); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	lock_sock(sk); | 
 |  | 
 | 	switch (msg_head.opcode) { | 
 |  | 
 | 	case TX_SETUP: | 
 | 		ret = bcm_tx_setup(&msg_head, msg, ifindex, sk); | 
 | 		break; | 
 |  | 
 | 	case RX_SETUP: | 
 | 		ret = bcm_rx_setup(&msg_head, msg, ifindex, sk); | 
 | 		break; | 
 |  | 
 | 	case TX_DELETE: | 
 | 		if (bcm_delete_tx_op(&bo->tx_ops, msg_head.can_id, ifindex)) | 
 | 			ret = MHSIZ; | 
 | 		else | 
 | 			ret = -EINVAL; | 
 | 		break; | 
 |  | 
 | 	case RX_DELETE: | 
 | 		if (bcm_delete_rx_op(&bo->rx_ops, msg_head.can_id, ifindex)) | 
 | 			ret = MHSIZ; | 
 | 		else | 
 | 			ret = -EINVAL; | 
 | 		break; | 
 |  | 
 | 	case TX_READ: | 
 | 		/* reuse msg_head for the reply to TX_READ */ | 
 | 		msg_head.opcode  = TX_STATUS; | 
 | 		ret = bcm_read_op(&bo->tx_ops, &msg_head, ifindex); | 
 | 		break; | 
 |  | 
 | 	case RX_READ: | 
 | 		/* reuse msg_head for the reply to RX_READ */ | 
 | 		msg_head.opcode  = RX_STATUS; | 
 | 		ret = bcm_read_op(&bo->rx_ops, &msg_head, ifindex); | 
 | 		break; | 
 |  | 
 | 	case TX_SEND: | 
 | 		/* we need exactly one can_frame behind the msg head */ | 
 | 		if ((msg_head.nframes != 1) || (size != CFSIZ + MHSIZ)) | 
 | 			ret = -EINVAL; | 
 | 		else | 
 | 			ret = bcm_tx_send(msg, ifindex, sk); | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		ret = -EINVAL; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	release_sock(sk); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * notification handler for netdevice status changes | 
 |  */ | 
 | static int bcm_notifier(struct notifier_block *nb, unsigned long msg, | 
 | 			void *data) | 
 | { | 
 | 	struct net_device *dev = (struct net_device *)data; | 
 | 	struct bcm_sock *bo = container_of(nb, struct bcm_sock, notifier); | 
 | 	struct sock *sk = &bo->sk; | 
 | 	struct bcm_op *op; | 
 | 	int notify_enodev = 0; | 
 |  | 
 | 	if (!net_eq(dev_net(dev), &init_net)) | 
 | 		return NOTIFY_DONE; | 
 |  | 
 | 	if (dev->type != ARPHRD_CAN) | 
 | 		return NOTIFY_DONE; | 
 |  | 
 | 	switch (msg) { | 
 |  | 
 | 	case NETDEV_UNREGISTER: | 
 | 		lock_sock(sk); | 
 |  | 
 | 		/* remove device specific receive entries */ | 
 | 		list_for_each_entry(op, &bo->rx_ops, list) | 
 | 			if (op->rx_reg_dev == dev) | 
 | 				bcm_rx_unreg(dev, op); | 
 |  | 
 | 		/* remove device reference, if this is our bound device */ | 
 | 		if (bo->bound && bo->ifindex == dev->ifindex) { | 
 | 			bo->bound   = 0; | 
 | 			bo->ifindex = 0; | 
 | 			notify_enodev = 1; | 
 | 		} | 
 |  | 
 | 		release_sock(sk); | 
 |  | 
 | 		if (notify_enodev) { | 
 | 			sk->sk_err = ENODEV; | 
 | 			if (!sock_flag(sk, SOCK_DEAD)) | 
 | 				sk->sk_error_report(sk); | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case NETDEV_DOWN: | 
 | 		if (bo->bound && bo->ifindex == dev->ifindex) { | 
 | 			sk->sk_err = ENETDOWN; | 
 | 			if (!sock_flag(sk, SOCK_DEAD)) | 
 | 				sk->sk_error_report(sk); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return NOTIFY_DONE; | 
 | } | 
 |  | 
 | /* | 
 |  * initial settings for all BCM sockets to be set at socket creation time | 
 |  */ | 
 | static int bcm_init(struct sock *sk) | 
 | { | 
 | 	struct bcm_sock *bo = bcm_sk(sk); | 
 |  | 
 | 	bo->bound            = 0; | 
 | 	bo->ifindex          = 0; | 
 | 	bo->dropped_usr_msgs = 0; | 
 | 	bo->bcm_proc_read    = NULL; | 
 |  | 
 | 	INIT_LIST_HEAD(&bo->tx_ops); | 
 | 	INIT_LIST_HEAD(&bo->rx_ops); | 
 |  | 
 | 	/* set notifier */ | 
 | 	bo->notifier.notifier_call = bcm_notifier; | 
 |  | 
 | 	register_netdevice_notifier(&bo->notifier); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * standard socket functions | 
 |  */ | 
 | static int bcm_release(struct socket *sock) | 
 | { | 
 | 	struct sock *sk = sock->sk; | 
 | 	struct bcm_sock *bo; | 
 | 	struct bcm_op *op, *next; | 
 |  | 
 | 	if (sk == NULL) | 
 | 		return 0; | 
 |  | 
 | 	bo = bcm_sk(sk); | 
 |  | 
 | 	/* remove bcm_ops, timer, rx_unregister(), etc. */ | 
 |  | 
 | 	unregister_netdevice_notifier(&bo->notifier); | 
 |  | 
 | 	lock_sock(sk); | 
 |  | 
 | 	list_for_each_entry_safe(op, next, &bo->tx_ops, list) | 
 | 		bcm_remove_op(op); | 
 |  | 
 | 	list_for_each_entry_safe(op, next, &bo->rx_ops, list) { | 
 | 		/* | 
 | 		 * Don't care if we're bound or not (due to netdev problems) | 
 | 		 * can_rx_unregister() is always a save thing to do here. | 
 | 		 */ | 
 | 		if (op->ifindex) { | 
 | 			/* | 
 | 			 * Only remove subscriptions that had not | 
 | 			 * been removed due to NETDEV_UNREGISTER | 
 | 			 * in bcm_notifier() | 
 | 			 */ | 
 | 			if (op->rx_reg_dev) { | 
 | 				struct net_device *dev; | 
 |  | 
 | 				dev = dev_get_by_index(&init_net, op->ifindex); | 
 | 				if (dev) { | 
 | 					bcm_rx_unreg(dev, op); | 
 | 					dev_put(dev); | 
 | 				} | 
 | 			} | 
 | 		} else | 
 | 			can_rx_unregister(NULL, op->can_id, | 
 | 					  REGMASK(op->can_id), | 
 | 					  bcm_rx_handler, op); | 
 |  | 
 | 		bcm_remove_op(op); | 
 | 	} | 
 |  | 
 | 	/* remove procfs entry */ | 
 | 	if (proc_dir && bo->bcm_proc_read) | 
 | 		remove_proc_entry(bo->procname, proc_dir); | 
 |  | 
 | 	/* remove device reference */ | 
 | 	if (bo->bound) { | 
 | 		bo->bound   = 0; | 
 | 		bo->ifindex = 0; | 
 | 	} | 
 |  | 
 | 	sock_orphan(sk); | 
 | 	sock->sk = NULL; | 
 |  | 
 | 	release_sock(sk); | 
 | 	sock_put(sk); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int bcm_connect(struct socket *sock, struct sockaddr *uaddr, int len, | 
 | 		       int flags) | 
 | { | 
 | 	struct sockaddr_can *addr = (struct sockaddr_can *)uaddr; | 
 | 	struct sock *sk = sock->sk; | 
 | 	struct bcm_sock *bo = bcm_sk(sk); | 
 |  | 
 | 	if (len < sizeof(*addr)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (bo->bound) | 
 | 		return -EISCONN; | 
 |  | 
 | 	/* bind a device to this socket */ | 
 | 	if (addr->can_ifindex) { | 
 | 		struct net_device *dev; | 
 |  | 
 | 		dev = dev_get_by_index(&init_net, addr->can_ifindex); | 
 | 		if (!dev) | 
 | 			return -ENODEV; | 
 |  | 
 | 		if (dev->type != ARPHRD_CAN) { | 
 | 			dev_put(dev); | 
 | 			return -ENODEV; | 
 | 		} | 
 |  | 
 | 		bo->ifindex = dev->ifindex; | 
 | 		dev_put(dev); | 
 |  | 
 | 	} else { | 
 | 		/* no interface reference for ifindex = 0 ('any' CAN device) */ | 
 | 		bo->ifindex = 0; | 
 | 	} | 
 |  | 
 | 	bo->bound = 1; | 
 |  | 
 | 	if (proc_dir) { | 
 | 		/* unique socket address as filename */ | 
 | 		sprintf(bo->procname, "%lu", sock_i_ino(sk)); | 
 | 		bo->bcm_proc_read = proc_create_data(bo->procname, 0644, | 
 | 						     proc_dir, | 
 | 						     &bcm_proc_fops, sk); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int bcm_recvmsg(struct kiocb *iocb, struct socket *sock, | 
 | 		       struct msghdr *msg, size_t size, int flags) | 
 | { | 
 | 	struct sock *sk = sock->sk; | 
 | 	struct sk_buff *skb; | 
 | 	int error = 0; | 
 | 	int noblock; | 
 | 	int err; | 
 |  | 
 | 	noblock =  flags & MSG_DONTWAIT; | 
 | 	flags   &= ~MSG_DONTWAIT; | 
 | 	skb = skb_recv_datagram(sk, flags, noblock, &error); | 
 | 	if (!skb) | 
 | 		return error; | 
 |  | 
 | 	if (skb->len < size) | 
 | 		size = skb->len; | 
 |  | 
 | 	err = memcpy_toiovec(msg->msg_iov, skb->data, size); | 
 | 	if (err < 0) { | 
 | 		skb_free_datagram(sk, skb); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	sock_recv_ts_and_drops(msg, sk, skb); | 
 |  | 
 | 	if (msg->msg_name) { | 
 | 		msg->msg_namelen = sizeof(struct sockaddr_can); | 
 | 		memcpy(msg->msg_name, skb->cb, msg->msg_namelen); | 
 | 	} | 
 |  | 
 | 	skb_free_datagram(sk, skb); | 
 |  | 
 | 	return size; | 
 | } | 
 |  | 
 | static const struct proto_ops bcm_ops = { | 
 | 	.family        = PF_CAN, | 
 | 	.release       = bcm_release, | 
 | 	.bind          = sock_no_bind, | 
 | 	.connect       = bcm_connect, | 
 | 	.socketpair    = sock_no_socketpair, | 
 | 	.accept        = sock_no_accept, | 
 | 	.getname       = sock_no_getname, | 
 | 	.poll          = datagram_poll, | 
 | 	.ioctl         = can_ioctl,	/* use can_ioctl() from af_can.c */ | 
 | 	.listen        = sock_no_listen, | 
 | 	.shutdown      = sock_no_shutdown, | 
 | 	.setsockopt    = sock_no_setsockopt, | 
 | 	.getsockopt    = sock_no_getsockopt, | 
 | 	.sendmsg       = bcm_sendmsg, | 
 | 	.recvmsg       = bcm_recvmsg, | 
 | 	.mmap          = sock_no_mmap, | 
 | 	.sendpage      = sock_no_sendpage, | 
 | }; | 
 |  | 
 | static struct proto bcm_proto __read_mostly = { | 
 | 	.name       = "CAN_BCM", | 
 | 	.owner      = THIS_MODULE, | 
 | 	.obj_size   = sizeof(struct bcm_sock), | 
 | 	.init       = bcm_init, | 
 | }; | 
 |  | 
 | static const struct can_proto bcm_can_proto = { | 
 | 	.type       = SOCK_DGRAM, | 
 | 	.protocol   = CAN_BCM, | 
 | 	.ops        = &bcm_ops, | 
 | 	.prot       = &bcm_proto, | 
 | }; | 
 |  | 
 | static int __init bcm_module_init(void) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	printk(banner); | 
 |  | 
 | 	err = can_proto_register(&bcm_can_proto); | 
 | 	if (err < 0) { | 
 | 		printk(KERN_ERR "can: registration of bcm protocol failed\n"); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	/* create /proc/net/can-bcm directory */ | 
 | 	proc_dir = proc_mkdir("can-bcm", init_net.proc_net); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit bcm_module_exit(void) | 
 | { | 
 | 	can_proto_unregister(&bcm_can_proto); | 
 |  | 
 | 	if (proc_dir) | 
 | 		proc_net_remove(&init_net, "can-bcm"); | 
 | } | 
 |  | 
 | module_init(bcm_module_init); | 
 | module_exit(bcm_module_exit); |