|  | /* atlx.c -- common functions for Attansic network drivers | 
|  | * | 
|  | * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. | 
|  | * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com> | 
|  | * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com> | 
|  | * Copyright(c) 2007 Atheros Corporation. All rights reserved. | 
|  | * | 
|  | * Derived from Intel e1000 driver | 
|  | * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of the GNU General Public License as published by the Free | 
|  | * Software Foundation; either version 2 of the License, or (at your option) | 
|  | * any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., 59 | 
|  | * Temple Place - Suite 330, Boston, MA  02111-1307, USA. | 
|  | */ | 
|  |  | 
|  | /* Including this file like a header is a temporary hack, I promise. -- CHS */ | 
|  | #ifndef ATLX_C | 
|  | #define ATLX_C | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/if.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/socket.h> | 
|  | #include <linux/sockios.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/workqueue.h> | 
|  |  | 
|  | #include "atlx.h" | 
|  |  | 
|  | static struct atlx_spi_flash_dev flash_table[] = { | 
|  | /*	MFR_NAME  WRSR  READ  PRGM  WREN  WRDI  RDSR  RDID  SEC_ERS CHIP_ERS */ | 
|  | {"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52,   0x62}, | 
|  | {"SST",   0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20,   0x60}, | 
|  | {"ST",    0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8,   0xC7}, | 
|  | }; | 
|  |  | 
|  | static int atlx_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) | 
|  | { | 
|  | switch (cmd) { | 
|  | case SIOCGMIIPHY: | 
|  | case SIOCGMIIREG: | 
|  | case SIOCSMIIREG: | 
|  | return atlx_mii_ioctl(netdev, ifr, cmd); | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atlx_set_mac - Change the Ethernet Address of the NIC | 
|  | * @netdev: network interface device structure | 
|  | * @p: pointer to an address structure | 
|  | * | 
|  | * Returns 0 on success, negative on failure | 
|  | */ | 
|  | static int atlx_set_mac(struct net_device *netdev, void *p) | 
|  | { | 
|  | struct atlx_adapter *adapter = netdev_priv(netdev); | 
|  | struct sockaddr *addr = p; | 
|  |  | 
|  | if (netif_running(netdev)) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (!is_valid_ether_addr(addr->sa_data)) | 
|  | return -EADDRNOTAVAIL; | 
|  |  | 
|  | memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); | 
|  | memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); | 
|  |  | 
|  | atlx_set_mac_addr(&adapter->hw); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void atlx_check_for_link(struct atlx_adapter *adapter) | 
|  | { | 
|  | struct net_device *netdev = adapter->netdev; | 
|  | u16 phy_data = 0; | 
|  |  | 
|  | spin_lock(&adapter->lock); | 
|  | adapter->phy_timer_pending = false; | 
|  | atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); | 
|  | atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); | 
|  | spin_unlock(&adapter->lock); | 
|  |  | 
|  | /* notify upper layer link down ASAP */ | 
|  | if (!(phy_data & BMSR_LSTATUS)) { | 
|  | /* Link Down */ | 
|  | if (netif_carrier_ok(netdev)) { | 
|  | /* old link state: Up */ | 
|  | dev_info(&adapter->pdev->dev, "%s link is down\n", | 
|  | netdev->name); | 
|  | adapter->link_speed = SPEED_0; | 
|  | netif_carrier_off(netdev); | 
|  | } | 
|  | } | 
|  | schedule_work(&adapter->link_chg_task); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atlx_set_multi - Multicast and Promiscuous mode set | 
|  | * @netdev: network interface device structure | 
|  | * | 
|  | * The set_multi entry point is called whenever the multicast address | 
|  | * list or the network interface flags are updated.  This routine is | 
|  | * responsible for configuring the hardware for proper multicast, | 
|  | * promiscuous mode, and all-multi behavior. | 
|  | */ | 
|  | static void atlx_set_multi(struct net_device *netdev) | 
|  | { | 
|  | struct atlx_adapter *adapter = netdev_priv(netdev); | 
|  | struct atlx_hw *hw = &adapter->hw; | 
|  | struct netdev_hw_addr *ha; | 
|  | u32 rctl; | 
|  | u32 hash_value; | 
|  |  | 
|  | /* Check for Promiscuous and All Multicast modes */ | 
|  | rctl = ioread32(hw->hw_addr + REG_MAC_CTRL); | 
|  | if (netdev->flags & IFF_PROMISC) | 
|  | rctl |= MAC_CTRL_PROMIS_EN; | 
|  | else if (netdev->flags & IFF_ALLMULTI) { | 
|  | rctl |= MAC_CTRL_MC_ALL_EN; | 
|  | rctl &= ~MAC_CTRL_PROMIS_EN; | 
|  | } else | 
|  | rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); | 
|  |  | 
|  | iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL); | 
|  |  | 
|  | /* clear the old settings from the multicast hash table */ | 
|  | iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); | 
|  | iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); | 
|  |  | 
|  | /* compute mc addresses' hash value ,and put it into hash table */ | 
|  | netdev_for_each_mc_addr(ha, netdev) { | 
|  | hash_value = atlx_hash_mc_addr(hw, ha->addr); | 
|  | atlx_hash_set(hw, hash_value); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atlx_irq_enable - Enable default interrupt generation settings | 
|  | * @adapter: board private structure | 
|  | */ | 
|  | static void atlx_irq_enable(struct atlx_adapter *adapter) | 
|  | { | 
|  | iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR); | 
|  | ioread32(adapter->hw.hw_addr + REG_IMR); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atlx_irq_disable - Mask off interrupt generation on the NIC | 
|  | * @adapter: board private structure | 
|  | */ | 
|  | static void atlx_irq_disable(struct atlx_adapter *adapter) | 
|  | { | 
|  | iowrite32(0, adapter->hw.hw_addr + REG_IMR); | 
|  | ioread32(adapter->hw.hw_addr + REG_IMR); | 
|  | synchronize_irq(adapter->pdev->irq); | 
|  | } | 
|  |  | 
|  | static void atlx_clear_phy_int(struct atlx_adapter *adapter) | 
|  | { | 
|  | u16 phy_data; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&adapter->lock, flags); | 
|  | atlx_read_phy_reg(&adapter->hw, 19, &phy_data); | 
|  | spin_unlock_irqrestore(&adapter->lock, flags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atlx_tx_timeout - Respond to a Tx Hang | 
|  | * @netdev: network interface device structure | 
|  | */ | 
|  | static void atlx_tx_timeout(struct net_device *netdev) | 
|  | { | 
|  | struct atlx_adapter *adapter = netdev_priv(netdev); | 
|  | /* Do the reset outside of interrupt context */ | 
|  | schedule_work(&adapter->tx_timeout_task); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * atlx_link_chg_task - deal with link change event Out of interrupt context | 
|  | */ | 
|  | static void atlx_link_chg_task(struct work_struct *work) | 
|  | { | 
|  | struct atlx_adapter *adapter; | 
|  | unsigned long flags; | 
|  |  | 
|  | adapter = container_of(work, struct atlx_adapter, link_chg_task); | 
|  |  | 
|  | spin_lock_irqsave(&adapter->lock, flags); | 
|  | atlx_check_link(adapter); | 
|  | spin_unlock_irqrestore(&adapter->lock, flags); | 
|  | } | 
|  |  | 
|  | static void atlx_vlan_rx_register(struct net_device *netdev, | 
|  | struct vlan_group *grp) | 
|  | { | 
|  | struct atlx_adapter *adapter = netdev_priv(netdev); | 
|  | unsigned long flags; | 
|  | u32 ctrl; | 
|  |  | 
|  | spin_lock_irqsave(&adapter->lock, flags); | 
|  | /* atlx_irq_disable(adapter); FIXME: confirm/remove */ | 
|  | adapter->vlgrp = grp; | 
|  |  | 
|  | if (grp) { | 
|  | /* enable VLAN tag insert/strip */ | 
|  | ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); | 
|  | ctrl |= MAC_CTRL_RMV_VLAN; | 
|  | iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); | 
|  | } else { | 
|  | /* disable VLAN tag insert/strip */ | 
|  | ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); | 
|  | ctrl &= ~MAC_CTRL_RMV_VLAN; | 
|  | iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); | 
|  | } | 
|  |  | 
|  | /* atlx_irq_enable(adapter); FIXME */ | 
|  | spin_unlock_irqrestore(&adapter->lock, flags); | 
|  | } | 
|  |  | 
|  | static void atlx_restore_vlan(struct atlx_adapter *adapter) | 
|  | { | 
|  | atlx_vlan_rx_register(adapter->netdev, adapter->vlgrp); | 
|  | } | 
|  |  | 
|  | #endif /* ATLX_C */ |