sh: Kill off the rest of arch/sh64/kernel/.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
new file mode 100644
index 0000000..b4d9534
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -0,0 +1,536 @@
+/*
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2004 Richard Curnow
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Support functions for the SH5 PCI hardware.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rwsem.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <asm/pci.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include "pci_sh5.h"
+
+static unsigned long pcicr_virt;
+unsigned long pciio_virt;
+
+static void __init pci_fixup_ide_bases(struct pci_dev *d)
+{
+ int i;
+
+ /*
+ * PCI IDE controllers use non-standard I/O port decoding, respect it.
+ */
+ if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
+ return;
+ printk("PCI: IDE base address fixup for %s\n", pci_name(d));
+ for(i=0; i<4; i++) {
+ struct resource *r = &d->resource[i];
+ if ((r->start & ~0x80) == 0x374) {
+ r->start |= 2;
+ r->end = r->start;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
+
+char * __devinit pcibios_setup(char *str)
+{
+ return str;
+}
+
+/* Rounds a number UP to the nearest power of two. Used for
+ * sizing the PCI window.
+ */
+static u32 __init r2p2(u32 num)
+{
+ int i = 31;
+ u32 tmp = num;
+
+ if (num == 0)
+ return 0;
+
+ do {
+ if (tmp & (1 << 31))
+ break;
+ i--;
+ tmp <<= 1;
+ } while (i >= 0);
+
+ tmp = 1 << i;
+ /* If the original number isn't a power of 2, round it up */
+ if (tmp != num)
+ tmp <<= 1;
+
+ return tmp;
+}
+
+extern unsigned long long memory_start, memory_end;
+
+int __init sh5pci_init(unsigned memStart, unsigned memSize)
+{
+ u32 lsr0;
+ u32 uval;
+
+ pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR");
+ if (!pcicr_virt) {
+ panic("Unable to remap PCICR\n");
+ }
+
+ pciio_virt = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO");
+ if (!pciio_virt) {
+ panic("Unable to remap PCIIO\n");
+ }
+
+ pr_debug("Register base addres is 0x%08lx\n", pcicr_virt);
+
+ /* Clear snoop registers */
+ SH5PCI_WRITE(CSCR0, 0);
+ SH5PCI_WRITE(CSCR1, 0);
+
+ pr_debug("Wrote to reg\n");
+
+ /* Switch off interrupts */
+ SH5PCI_WRITE(INTM, 0);
+ SH5PCI_WRITE(AINTM, 0);
+ SH5PCI_WRITE(PINTM, 0);
+
+ /* Set bus active, take it out of reset */
+ uval = SH5PCI_READ(CR);
+
+ /* Set command Register */
+ SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | CR_PFCS | CR_BMAM);
+
+ uval=SH5PCI_READ(CR);
+ pr_debug("CR is actually 0x%08x\n",uval);
+
+ /* Allow it to be a master */
+ /* NB - WE DISABLE I/O ACCESS to stop overlap */
+ /* set WAIT bit to enable stepping, an attempt to improve stability */
+ SH5PCI_WRITE_SHORT(CSR_CMD,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_WAIT);
+
+ /*
+ ** Set translation mapping memory in order to convert the address
+ ** used for the main bus, to the PCI internal address.
+ */
+ SH5PCI_WRITE(MBR,0x40000000);
+
+ /* Always set the max size 512M */
+ SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));
+
+ /*
+ ** I/O addresses are mapped at internal PCI specific address
+ ** as is described into the configuration bridge table.
+ ** These are changed to 0, to allow cards that have legacy
+ ** io such as vga to function correctly. We set the SH5 IOBAR to
+ ** 256K, which is a bit big as we can only have 64K of address space
+ */
+
+ SH5PCI_WRITE(IOBR,0x0);
+
+ pr_debug("PCI:Writing 0x%08x to IOBR\n",0);
+
+ /* Set up a 256K window. Totally pointless waste of address space */
+ SH5PCI_WRITE(IOBMR,0);
+ pr_debug("PCI:Writing 0x%08x to IOBMR\n",0);
+
+ /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. Ideally,
+ * we would want to map the I/O region somewhere, but it is so big this is not
+ * that easy!
+ */
+ SH5PCI_WRITE(CSR_IBAR0,~0);
+ /* Set memory size value */
+ memSize = memory_end - memory_start;
+
+ /* Now we set up the mbars so the PCI bus can see the memory of the machine */
+ if (memSize < (1024 * 1024)) {
+ printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%x?\n", memSize);
+ return -EINVAL;
+ }
+
+ /* Set LSR 0 */
+ lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : ((r2p2(memSize) - 0x100000) | 0x1);
+ SH5PCI_WRITE(LSR0, lsr0);
+
+ pr_debug("PCI:Writing 0x%08x to LSR0\n",lsr0);
+
+ /* Set MBAR 0 */
+ SH5PCI_WRITE(CSR_MBAR0, memory_start);
+ SH5PCI_WRITE(LAR0, memory_start);
+
+ SH5PCI_WRITE(CSR_MBAR1,0);
+ SH5PCI_WRITE(LAR1,0);
+ SH5PCI_WRITE(LSR1,0);
+
+ pr_debug("PCI:Writing 0x%08llx to CSR_MBAR0\n",memory_start);
+ pr_debug("PCI:Writing 0x%08llx to LAR0\n",memory_start);
+
+ /* Enable the PCI interrupts on the device */
+ SH5PCI_WRITE(INTM, ~0);
+ SH5PCI_WRITE(AINTM, ~0);
+ SH5PCI_WRITE(PINTM, ~0);
+
+ pr_debug("Switching on all error interrupts\n");
+
+ return(0);
+}
+
+static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *val)
+{
+ SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
+
+ switch (size) {
+ case 1:
+ *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3));
+ break;
+ case 2:
+ *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2));
+ break;
+ case 4:
+ *val = SH5PCI_READ(PDR);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 val)
+{
+ SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
+
+ switch (size) {
+ case 1:
+ SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
+ break;
+ case 2:
+ SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
+ break;
+ case 4:
+ SH5PCI_WRITE(PDR, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pci_config_ops = {
+ .read = sh5pci_read,
+ .write = sh5pci_write,
+};
+
+/* Everything hangs off this */
+static struct pci_bus *pci_root_bus;
+
+
+static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin)
+{
+ pr_debug("swizzle for dev %d on bus %d slot %d pin is %d\n",
+ dev->devfn,dev->bus->number, PCI_SLOT(dev->devfn),*pin);
+ return PCI_SLOT(dev->devfn);
+}
+
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+ return (((pin-1) + slot) % 4) + 1;
+}
+
+u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+ if (dev->bus->number != 0) {
+ u8 pin = *pinp;
+ do {
+ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+ /* Move up the chain of bridges. */
+ dev = dev->bus->self;
+ } while (dev->bus->self);
+ *pinp = pin;
+
+ /* The slot is the slot of the last bridge. */
+ }
+
+ return PCI_SLOT(dev->devfn);
+}
+
+/* This needs to be shunted out of here into the board specific bit */
+
+static int __init map_cayman_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int result = -1;
+
+ /* The complication here is that the PCI IRQ lines from the Cayman's 2
+ 5V slots get into the CPU via a different path from the IRQ lines
+ from the 3 3.3V slots. Thus, we have to detect whether the card's
+ interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling'
+ at the point where we cross from 5V to 3.3V is not the normal case.
+
+ The added complication is that we don't know that the 5V slots are
+ always bus 2, because a card containing a PCI-PCI bridge may be
+ plugged into a 3.3V slot, and this changes the bus numbering.
+
+ Also, the Cayman has an intermediate PCI bus that goes a custom
+ expansion board header (and to the secondary bridge). This bus has
+ never been used in practice.
+
+ The 1ary onboard PCI-PCI bridge is device 3 on bus 0
+ The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of the 1ary bridge.
+ */
+
+ struct slot_pin {
+ int slot;
+ int pin;
+ } path[4];
+ int i=0;
+
+ while (dev->bus->number > 0) {
+
+ slot = path[i].slot = PCI_SLOT(dev->devfn);
+ pin = path[i].pin = bridge_swizzle(pin, slot);
+ dev = dev->bus->self;
+ i++;
+ if (i > 3) panic("PCI path to root bus too long!\n");
+ }
+
+ slot = PCI_SLOT(dev->devfn);
+ /* This is the slot on bus 0 through which the device is eventually
+ reachable. */
+
+ /* Now work back up. */
+ if ((slot < 3) || (i == 0)) {
+ /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final
+ swizzle now. */
+ result = IRQ_INTA + bridge_swizzle(pin, slot) - 1;
+ } else {
+ i--;
+ slot = path[i].slot;
+ pin = path[i].pin;
+ if (slot > 0) {
+ panic("PCI expansion bus device found - not handled!\n");
+ } else {
+ if (i > 0) {
+ /* 5V slots */
+ i--;
+ slot = path[i].slot;
+ pin = path[i].pin;
+ /* 'pin' was swizzled earlier wrt slot, don't do it again. */
+ result = IRQ_P2INTA + (pin - 1);
+ } else {
+ /* IRQ for 2ary PCI-PCI bridge : unused */
+ result = -1;
+ }
+ }
+ }
+
+ return result;
+}
+
+static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
+{
+ struct pt_regs *regs = get_irq_regs();
+ unsigned pci_int, pci_air, pci_cir, pci_aint;
+
+ pci_int = SH5PCI_READ(INT);
+ pci_cir = SH5PCI_READ(CIR);
+ pci_air = SH5PCI_READ(AIR);
+
+ if (pci_int) {
+ printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
+ printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
+ printk("PCI AIR -> 0x%x\n", pci_air);
+ printk("PCI CIR -> 0x%x\n", pci_cir);
+ SH5PCI_WRITE(INT, ~0);
+ }
+
+ pci_aint = SH5PCI_READ(AINT);
+ if (pci_aint) {
+ printk("PCI ARB INTERRUPT!\n");
+ printk("PCI AINT -> 0x%x\n", pci_aint);
+ printk("PCI AIR -> 0x%x\n", pci_air);
+ printk("PCI CIR -> 0x%x\n", pci_cir);
+ SH5PCI_WRITE(AINT, ~0);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
+{
+ printk("SERR IRQ\n");
+
+ return IRQ_NONE;
+}
+
+static void __init
+pcibios_size_bridge(struct pci_bus *bus, struct resource *ior,
+ struct resource *memr)
+{
+ struct resource io_res, mem_res;
+ struct pci_dev *dev;
+ struct pci_dev *bridge = bus->self;
+ struct list_head *ln;
+
+ if (!bridge)
+ return; /* host bridge, nothing to do */
+
+ /* set reasonable default locations for pcibios_align_resource */
+ io_res.start = PCIBIOS_MIN_IO;
+ mem_res.start = PCIBIOS_MIN_MEM;
+
+ io_res.end = io_res.start;
+ mem_res.end = mem_res.start;
+
+ /* Collect information about how our direct children are layed out. */
+ for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
+ int i;
+ dev = pci_dev_b(ln);
+
+ /* Skip bridges for now */
+ if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI)
+ continue;
+
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ struct resource res;
+ unsigned long size;
+
+ memcpy(&res, &dev->resource[i], sizeof(res));
+ size = res.end - res.start + 1;
+
+ if (res.flags & IORESOURCE_IO) {
+ res.start = io_res.end;
+ pcibios_align_resource(dev, &res, size, 0);
+ io_res.end = res.start + size;
+ } else if (res.flags & IORESOURCE_MEM) {
+ res.start = mem_res.end;
+ pcibios_align_resource(dev, &res, size, 0);
+ mem_res.end = res.start + size;
+ }
+ }
+ }
+
+ /* And for all of the subordinate busses. */
+ for (ln=bus->children.next; ln != &bus->children; ln=ln->next)
+ pcibios_size_bridge(pci_bus_b(ln), &io_res, &mem_res);
+
+ /* turn the ending locations into sizes (subtract start) */
+ io_res.end -= io_res.start;
+ mem_res.end -= mem_res.start;
+
+ /* Align the sizes up by bridge rules */
+ io_res.end = ALIGN(io_res.end, 4*1024) - 1;
+ mem_res.end = ALIGN(mem_res.end, 1*1024*1024) - 1;
+
+ /* Adjust the bridge's allocation requirements */
+ bridge->resource[0].end = bridge->resource[0].start + io_res.end;
+ bridge->resource[1].end = bridge->resource[1].start + mem_res.end;
+
+ bridge->resource[PCI_BRIDGE_RESOURCES].end =
+ bridge->resource[PCI_BRIDGE_RESOURCES].start + io_res.end;
+ bridge->resource[PCI_BRIDGE_RESOURCES+1].end =
+ bridge->resource[PCI_BRIDGE_RESOURCES+1].start + mem_res.end;
+
+ /* adjust parent's resource requirements */
+ if (ior) {
+ ior->end = ALIGN(ior->end, 4*1024);
+ ior->end += io_res.end;
+ }
+
+ if (memr) {
+ memr->end = ALIGN(memr->end, 1*1024*1024);
+ memr->end += mem_res.end;
+ }
+}
+
+static void __init pcibios_size_bridges(void)
+{
+ struct resource io_res, mem_res;
+
+ memset(&io_res, 0, sizeof(io_res));
+ memset(&mem_res, 0, sizeof(mem_res));
+
+ pcibios_size_bridge(pci_root_bus, &io_res, &mem_res);
+}
+
+static int __init pcibios_init(void)
+{
+ if (request_irq(IRQ_ERR, pcish5_err_irq,
+ IRQF_DISABLED, "PCI Error",NULL) < 0) {
+ printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
+ return -EINVAL;
+ }
+
+ if (request_irq(IRQ_SERR, pcish5_serr_irq,
+ IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
+ printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
+ return -EINVAL;
+ }
+
+ /* The pci subsystem needs to know where memory is and how much
+ * of it there is. I've simply made these globals. A better mechanism
+ * is probably needed.
+ */
+ sh5pci_init(__pa(memory_start),
+ __pa(memory_end) - __pa(memory_start));
+
+ pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL);
+ pcibios_size_bridges();
+ pci_assign_unassigned_resources();
+ pci_fixup_irqs(no_swizzle, map_cayman_irq);
+
+ return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev = bus->self;
+ int i;
+
+#if 1
+ if(dev) {
+ for(i=0; i<3; i++) {
+ bus->resource[i] =
+ &dev->resource[PCI_BRIDGE_RESOURCES+i];
+ bus->resource[i]->name = bus->name;
+ }
+ bus->resource[0]->flags |= IORESOURCE_IO;
+ bus->resource[1]->flags |= IORESOURCE_MEM;
+
+ /* For now, propagate host limits to the bus;
+ * we'll adjust them later. */
+
+#if 1
+ bus->resource[0]->end = 64*1024 - 1 ;
+ bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1;
+ bus->resource[0]->start = PCIBIOS_MIN_IO;
+ bus->resource[1]->start = PCIBIOS_MIN_MEM;
+#else
+ bus->resource[0]->end = 0;
+ bus->resource[1]->end = 0;
+ bus->resource[0]->start =0;
+ bus->resource[1]->start = 0;
+#endif
+ /* Turn off downstream PF memory address range by default */
+ bus->resource[2]->start = 1024*1024;
+ bus->resource[2]->end = bus->resource[2]->start - 1;
+ }
+#endif
+
+}
+
diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h
new file mode 100644
index 0000000..c71159d
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-sh5.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Definitions for the SH5 PCI hardware.
+ */
+
+/* Product ID */
+#define PCISH5_PID 0x350d
+
+/* vendor ID */
+#define PCISH5_VID 0x1054
+
+/* Configuration types */
+#define ST_TYPE0 0x00 /* Configuration cycle type 0 */
+#define ST_TYPE1 0x01 /* Configuration cycle type 1 */
+
+/* VCR data */
+#define PCISH5_VCR_STATUS 0x00
+#define PCISH5_VCR_VERSION 0x08
+
+/*
+** ICR register offsets and bits
+*/
+#define PCISH5_ICR_CR 0x100 /* PCI control register values */
+#define CR_PBAM (1<<12)
+#define CR_PFCS (1<<11)
+#define CR_FTO (1<<10)
+#define CR_PFE (1<<9)
+#define CR_TBS (1<<8)
+#define CR_SPUE (1<<7)
+#define CR_BMAM (1<<6)
+#define CR_HOST (1<<5)
+#define CR_CLKEN (1<<4)
+#define CR_SOCS (1<<3)
+#define CR_IOCS (1<<2)
+#define CR_RSTCTL (1<<1)
+#define CR_CFINT (1<<0)
+#define CR_LOCK_MASK 0xa5000000
+
+#define PCISH5_ICR_INT 0x114 /* Interrupt registert values */
+#define INT_MADIM (1<<2)
+
+#define PCISH5_ICR_LSR0 0X104 /* Local space register values */
+#define PCISH5_ICR_LSR1 0X108 /* Local space register values */
+#define PCISH5_ICR_LAR0 0x10c /* Local address register values */
+#define PCISH5_ICR_LAR1 0x110 /* Local address register values */
+#define PCISH5_ICR_INTM 0x118 /* Interrupt mask register values */
+#define PCISH5_ICR_AIR 0x11c /* Interrupt error address information register values */
+#define PCISH5_ICR_CIR 0x120 /* Interrupt error command information register values */
+#define PCISH5_ICR_AINT 0x130 /* Interrupt error arbiter interrupt register values */
+#define PCISH5_ICR_AINTM 0x134 /* Interrupt error arbiter interrupt mask register values */
+#define PCISH5_ICR_BMIR 0x138 /* Interrupt error info register of bus master values */
+#define PCISH5_ICR_PAR 0x1c0 /* Pio address register values */
+#define PCISH5_ICR_MBR 0x1c4 /* Memory space bank register values */
+#define PCISH5_ICR_IOBR 0x1c8 /* I/O space bank register values */
+#define PCISH5_ICR_PINT 0x1cc /* power management interrupt register values */
+#define PCISH5_ICR_PINTM 0x1d0 /* power management interrupt mask register values */
+#define PCISH5_ICR_MBMR 0x1d8 /* memory space bank mask register values */
+#define PCISH5_ICR_IOBMR 0x1dc /* I/O space bank mask register values */
+#define PCISH5_ICR_CSCR0 0x210 /* PCI cache snoop control register 0 */
+#define PCISH5_ICR_CSCR1 0x214 /* PCI cache snoop control register 1 */
+#define PCISH5_ICR_PDR 0x220 /* Pio data register values */
+
+/* These are configs space registers */
+#define PCISH5_ICR_CSR_VID 0x000 /* Vendor id */
+#define PCISH5_ICR_CSR_DID 0x002 /* Device id */
+#define PCISH5_ICR_CSR_CMD 0x004 /* Command register */
+#define PCISH5_ICR_CSR_STATUS 0x006 /* Stautus */
+#define PCISH5_ICR_CSR_IBAR0 0x010 /* I/O base address register */
+#define PCISH5_ICR_CSR_MBAR0 0x014 /* First Memory base address register */
+#define PCISH5_ICR_CSR_MBAR1 0x018 /* Second Memory base address register */
+
+
+
+/* Base address of registers */
+#define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000)
+#define SH5PCI_IO_BASE (PHYS_PCI_BLOCK + 0x00800000)
+/* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG) */
+
+/* Register selection macro */
+#define PCISH5_ICR_REG(x) ( pcicr_virt + (PCISH5_ICR_##x))
+/* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
+
+/* Write I/O functions */
+#define SH5PCI_WRITE(reg,val) ctrl_outl((u32)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_SHORT(reg,val) ctrl_outw((u16)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_BYTE(reg,val) ctrl_outb((u8)(val),PCISH5_ICR_REG(reg))
+
+/* Read I/O functions */
+#define SH5PCI_READ(reg) ctrl_inl(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_SHORT(reg) ctrl_inw(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_BYTE(reg) ctrl_inb(PCISH5_ICR_REG(reg))
+
+/* Set PCI config bits */
+#define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)
+
+/* Set PCI command register */
+#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where)
+
+/* Size converters */
+#define PCISH5_MEM_SIZCONV(x) (((x / 0x40000) - 1) << 18)
+#define PCISH5_IO_SIZCONV(x) (((x / 0x40000) - 1) << 18)
+
+
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 990ba74..c892898 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -6,7 +6,7 @@
obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_32.o \
ptrace_32.o semaphore.o setup.o signal_32.o sys_sh.o sys_sh32.o \
- syscalls_32.o time.o topology.o traps.o traps_32.o
+ syscalls_32.o time_32.o topology.o traps.o traps_32.o
obj-y += cpu/ timers/
obj-$(CONFIG_VSYSCALL) += vsyscall/
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
index 10e3ae1..1ef21cc 100644
--- a/arch/sh/kernel/Makefile_64
+++ b/arch/sh/kernel/Makefile_64
@@ -2,7 +2,7 @@
obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \
ptrace_64.o semaphore.o setup.o signal_64.o sys_sh.o sys_sh64.o \
- syscalls_64.o time.o topology.o traps.o traps_64.o
+ syscalls_64.o time_64.o topology.o traps.o traps_64.o
obj-y += cpu/ timers/
obj-$(CONFIG_VSYSCALL) += vsyscall/
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time_32.c
similarity index 100%
rename from arch/sh/kernel/time.c
rename to arch/sh/kernel/time_32.c
diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c
new file mode 100644
index 0000000..4c52fee
--- /dev/null
+++ b/arch/sh/kernel/time_64.c
@@ -0,0 +1,528 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/time.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ * Copyright (C) 2003 Richard Curnow
+ *
+ * Original TMU/RTC code taken from sh version.
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Some code taken from i386 version.
+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
+ */
+#include <linux/errno.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/bcd.h>
+#include <linux/timex.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/cpu/registers.h> /* required by inline __asm__ stmt. */
+#include <asm/cpu/irq.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/delay.h>
+
+#define TMU_TOCR_INIT 0x00
+#define TMU0_TCR_INIT 0x0020
+#define TMU_TSTR_INIT 1
+#define TMU_TSTR_OFF 0
+
+/* Real Time Clock */
+#define RTC_BLOCK_OFF 0x01040000
+#define RTC_BASE PHYS_PERIPHERAL_BLOCK + RTC_BLOCK_OFF
+#define RTC_RCR1_CIE 0x10 /* Carry Interrupt Enable */
+#define RTC_RCR1 (rtc_base + 0x38)
+
+/* Clock, Power and Reset Controller */
+#define CPRC_BLOCK_OFF 0x01010000
+#define CPRC_BASE PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF
+
+#define FRQCR (cprc_base+0x0)
+#define WTCSR (cprc_base+0x0018)
+#define STBCR (cprc_base+0x0030)
+
+/* Time Management Unit */
+#define TMU_BLOCK_OFF 0x01020000
+#define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
+#define TMU0_BASE tmu_base + 0x8 + (0xc * 0x0)
+#define TMU1_BASE tmu_base + 0x8 + (0xc * 0x1)
+#define TMU2_BASE tmu_base + 0x8 + (0xc * 0x2)
+
+#define TMU_TOCR tmu_base+0x0 /* Byte access */
+#define TMU_TSTR tmu_base+0x4 /* Byte access */
+
+#define TMU0_TCOR TMU0_BASE+0x0 /* Long access */
+#define TMU0_TCNT TMU0_BASE+0x4 /* Long access */
+#define TMU0_TCR TMU0_BASE+0x8 /* Word access */
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+static unsigned long tmu_base, rtc_base;
+unsigned long cprc_base;
+
+/* Variables to allow interpolation of time of day to resolution better than a
+ * jiffy. */
+
+/* This is effectively protected by xtime_lock */
+static unsigned long ctc_last_interrupt;
+static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */
+
+#define CTC_JIFFY_SCALE_SHIFT 40
+
+/* 2**CTC_JIFFY_SCALE_SHIFT / ctc_ticks_per_jiffy */
+static unsigned long long scaled_recip_ctc_ticks_per_jiffy;
+
+/* Estimate number of microseconds that have elapsed since the last timer tick,
+ by scaling the delta that has occurred in the CTC register.
+
+ WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at
+ the CPU clock rate. If the CPU sleeps, the CTC stops counting. Bear this
+ in mind if enabling SLEEP_WORKS in process.c. In that case, this algorithm
+ probably needs to use TMU.TCNT0 instead. This will work even if the CPU is
+ sleeping, though will be coarser.
+
+ FIXME : What if usecs_per_tick is moving around too much, e.g. if an adjtime
+ is running or if the freq or tick arguments of adjtimex are modified after
+ we have calibrated the scaling factor? This will result in either a jump at
+ the end of a tick period, or a wrap backwards at the start of the next one,
+ if the application is reading the time of day often enough. I think we
+ ought to do better than this. For this reason, usecs_per_jiffy is left
+ separated out in the calculation below. This allows some future hook into
+ the adjtime-related stuff in kernel/timer.c to remove this hazard.
+
+*/
+
+static unsigned long usecs_since_tick(void)
+{
+ unsigned long long current_ctc;
+ long ctc_ticks_since_interrupt;
+ unsigned long long ull_ctc_ticks_since_interrupt;
+ unsigned long result;
+
+ unsigned long long mul1_out;
+ unsigned long long mul1_out_high;
+ unsigned long long mul2_out_low, mul2_out_high;
+
+ /* Read CTC register */
+ asm ("getcon cr62, %0" : "=r" (current_ctc));
+ /* Note, the CTC counts down on each CPU clock, not up.
+ Note(2), use long type to get correct wraparound arithmetic when
+ the counter crosses zero. */
+ ctc_ticks_since_interrupt = (long) ctc_last_interrupt - (long) current_ctc;
+ ull_ctc_ticks_since_interrupt = (unsigned long long) ctc_ticks_since_interrupt;
+
+ /* Inline assembly to do 32x32x32->64 multiplier */
+ asm volatile ("mulu.l %1, %2, %0" :
+ "=r" (mul1_out) :
+ "r" (ull_ctc_ticks_since_interrupt), "r" (usecs_per_jiffy));
+
+ mul1_out_high = mul1_out >> 32;
+
+ asm volatile ("mulu.l %1, %2, %0" :
+ "=r" (mul2_out_low) :
+ "r" (mul1_out), "r" (scaled_recip_ctc_ticks_per_jiffy));
+
+#if 1
+ asm volatile ("mulu.l %1, %2, %0" :
+ "=r" (mul2_out_high) :
+ "r" (mul1_out_high), "r" (scaled_recip_ctc_ticks_per_jiffy));
+#endif
+
+ result = (unsigned long) (((mul2_out_high << 32) + mul2_out_low) >> CTC_JIFFY_SCALE_SHIFT);
+
+ return result;
+}
+
+void do_gettimeofday(struct timeval *tv)
+{
+ unsigned long flags;
+ unsigned long seq;
+ unsigned long usec, sec;
+
+ do {
+ seq = read_seqbegin_irqsave(&xtime_lock, flags);
+ usec = usecs_since_tick();
+ sec = xtime.tv_sec;
+ usec += xtime.tv_nsec / 1000;
+ } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+
+ while (usec >= 1000000) {
+ usec -= 1000000;
+ sec++;
+ }
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+
+int do_settimeofday(struct timespec *tv)
+{
+ time_t wtm_sec, sec = tv->tv_sec;
+ long wtm_nsec, nsec = tv->tv_nsec;
+
+ if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ return -EINVAL;
+
+ write_seqlock_irq(&xtime_lock);
+ /*
+ * This is revolting. We need to set "xtime" correctly. However, the
+ * value in this location is the value at the most recent update of
+ * wall time. Discover what correction gettimeofday() would have
+ * made, and then undo it!
+ */
+ nsec -= 1000 * usecs_since_tick();
+
+ wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+ wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+ set_normalized_timespec(&xtime, sec, nsec);
+ set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+ ntp_clear();
+ write_sequnlock_irq(&xtime_lock);
+ clock_was_set();
+
+ return 0;
+}
+EXPORT_SYMBOL(do_settimeofday);
+
+/* Dummy RTC ops */
+static void null_rtc_get_time(struct timespec *tv)
+{
+ tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
+ tv->tv_nsec = 0;
+}
+
+static int null_rtc_set_time(const time_t secs)
+{
+ return 0;
+}
+
+void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
+int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
+
+/* last time the RTC clock got updated */
+static long last_rtc_update;
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+static inline void do_timer_interrupt(void)
+{
+ unsigned long long current_ctc;
+ asm ("getcon cr62, %0" : "=r" (current_ctc));
+ ctc_last_interrupt = (unsigned long) current_ctc;
+
+ do_timer(1);
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(get_irq_regs()));
+#endif
+ if (current->pid)
+ profile_tick(CPU_PROFILING);
+
+#ifdef CONFIG_HEARTBEAT
+ if (sh_mv.mv_heartbeat != NULL)
+ sh_mv.mv_heartbeat();
+#endif
+
+ /*
+ * If we have an externally synchronized Linux clock, then update
+ * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ */
+ if (ntp_synced() &&
+ xtime.tv_sec > last_rtc_update + 660 &&
+ (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
+ (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
+ if (rtc_sh_set_time(xtime.tv_sec) == 0)
+ last_rtc_update = xtime.tv_sec;
+ else
+ /* do it again in 60 s */
+ last_rtc_update = xtime.tv_sec - 600;
+ }
+}
+
+/*
+ * This is the same as the above, except we _also_ save the current
+ * Time Stamp Counter value at the time of the timer interrupt, so that
+ * we later on can estimate the time of day more exactly.
+ */
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ unsigned long timer_status;
+
+ /* Clear UNF bit */
+ timer_status = ctrl_inw(TMU0_TCR);
+ timer_status &= ~0x100;
+ ctrl_outw(timer_status, TMU0_TCR);
+
+ /*
+ * Here we are in the timer irq handler. We just have irqs locally
+ * disabled but we don't know if the timer_bh is running on the other
+ * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
+ * the irq version of write_lock because as just said we have irq
+ * locally disabled. -arca
+ */
+ write_lock(&xtime_lock);
+ do_timer_interrupt();
+ write_unlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+
+static __init unsigned int get_cpu_hz(void)
+{
+ unsigned int count;
+ unsigned long __dummy;
+ unsigned long ctc_val_init, ctc_val;
+
+ /*
+ ** Regardless the toolchain, force the compiler to use the
+ ** arbitrary register r3 as a clock tick counter.
+ ** NOTE: r3 must be in accordance with sh64_rtc_interrupt()
+ */
+ register unsigned long long __rtc_irq_flag __asm__ ("r3");
+
+ local_irq_enable();
+ do {} while (ctrl_inb(rtc_base) != 0);
+ ctrl_outb(RTC_RCR1_CIE, RTC_RCR1); /* Enable carry interrupt */
+
+ /*
+ * r3 is arbitrary. CDC does not support "=z".
+ */
+ ctc_val_init = 0xffffffff;
+ ctc_val = ctc_val_init;
+
+ asm volatile("gettr tr0, %1\n\t"
+ "putcon %0, " __CTC "\n\t"
+ "and %2, r63, %2\n\t"
+ "pta $+4, tr0\n\t"
+ "beq/l %2, r63, tr0\n\t"
+ "ptabs %1, tr0\n\t"
+ "getcon " __CTC ", %0\n\t"
+ : "=r"(ctc_val), "=r" (__dummy), "=r" (__rtc_irq_flag)
+ : "0" (0));
+ local_irq_disable();
+ /*
+ * SH-3:
+ * CPU clock = 4 stages * loop
+ * tst rm,rm if id ex
+ * bt/s 1b if id ex
+ * add #1,rd if id ex
+ * (if) pipe line stole
+ * tst rm,rm if id ex
+ * ....
+ *
+ *
+ * SH-4:
+ * CPU clock = 6 stages * loop
+ * I don't know why.
+ * ....
+ *
+ * SH-5:
+ * Use CTC register to count. This approach returns the right value
+ * even if the I-cache is disabled (e.g. whilst debugging.)
+ *
+ */
+
+ count = ctc_val_init - ctc_val; /* CTC counts down */
+
+#if defined (CONFIG_SH_SIMULATOR)
+ /*
+ * Let's pretend we are a 5MHz SH-5 to avoid a too
+ * little timer interval. Also to keep delay
+ * calibration within a reasonable time.
+ */
+ return 5000000;
+#else
+ /*
+ * This really is count by the number of clock cycles
+ * by the ratio between a complete R64CNT
+ * wrap-around (128) and CUI interrupt being raised (64).
+ */
+ return count*2;
+#endif
+}
+
+static irqreturn_t sh64_rtc_interrupt(int irq, void *dev_id)
+{
+ struct pt_regs *regs = get_irq_regs();
+
+ ctrl_outb(0, RTC_RCR1); /* Disable Carry Interrupts */
+ regs->regs[3] = 1; /* Using r3 */
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq0 = {
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED,
+ .mask = CPU_MASK_NONE,
+ .name = "timer",
+};
+static struct irqaction irq1 = {
+ .handler = sh64_rtc_interrupt,
+ .flags = IRQF_DISABLED,
+ .mask = CPU_MASK_NONE,
+ .name = "rtc",
+};
+
+void __init time_init(void)
+{
+ unsigned int cpu_clock, master_clock, bus_clock, module_clock;
+ unsigned long interval;
+ unsigned long frqcr, ifc, pfc;
+ static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
+#define bfc_table ifc_table /* Same */
+#define pfc_table ifc_table /* Same */
+
+ tmu_base = onchip_remap(TMU_BASE, 1024, "TMU");
+ if (!tmu_base) {
+ panic("Unable to remap TMU\n");
+ }
+
+ rtc_base = onchip_remap(RTC_BASE, 1024, "RTC");
+ if (!rtc_base) {
+ panic("Unable to remap RTC\n");
+ }
+
+ cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
+ if (!cprc_base) {
+ panic("Unable to remap CPRC\n");
+ }
+
+ rtc_sh_get_time(&xtime);
+
+ setup_irq(TIMER_IRQ, &irq0);
+ setup_irq(RTC_IRQ, &irq1);
+
+ /* Check how fast it is.. */
+ cpu_clock = get_cpu_hz();
+
+ /* Note careful order of operations to maintain reasonable precision and avoid overflow. */
+ scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) / (unsigned long long)(cpu_clock / HZ));
+
+ free_irq(RTC_IRQ, NULL);
+
+ printk("CPU clock: %d.%02dMHz\n",
+ (cpu_clock / 1000000), (cpu_clock % 1000000)/10000);
+ {
+ unsigned short bfc;
+ frqcr = ctrl_inl(FRQCR);
+ ifc = ifc_table[(frqcr>> 6) & 0x0007];
+ bfc = bfc_table[(frqcr>> 3) & 0x0007];
+ pfc = pfc_table[(frqcr>> 12) & 0x0007];
+ master_clock = cpu_clock * ifc;
+ bus_clock = master_clock/bfc;
+ }
+
+ printk("Bus clock: %d.%02dMHz\n",
+ (bus_clock/1000000), (bus_clock % 1000000)/10000);
+ module_clock = master_clock/pfc;
+ printk("Module clock: %d.%02dMHz\n",
+ (module_clock/1000000), (module_clock % 1000000)/10000);
+ interval = (module_clock/(HZ*4));
+
+ printk("Interval = %ld\n", interval);
+
+ current_cpu_data.cpu_clock = cpu_clock;
+ current_cpu_data.master_clock = master_clock;
+ current_cpu_data.bus_clock = bus_clock;
+ current_cpu_data.module_clock = module_clock;
+
+ /* Start TMU0 */
+ ctrl_outb(TMU_TSTR_OFF, TMU_TSTR);
+ ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
+ ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
+ ctrl_outl(interval, TMU0_TCOR);
+ ctrl_outl(interval, TMU0_TCNT);
+ ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+}
+
+void enter_deep_standby(void)
+{
+ /* Disable watchdog timer */
+ ctrl_outl(0xa5000000, WTCSR);
+ /* Configure deep standby on sleep */
+ ctrl_outl(0x03, STBCR);
+
+#ifdef CONFIG_SH_ALPHANUMERIC
+ {
+ extern void mach_alphanum(int position, unsigned char value);
+ extern void mach_alphanum_brightness(int setting);
+ char halted[] = "Halted. ";
+ int i;
+ mach_alphanum_brightness(6); /* dimmest setting above off */
+ for (i=0; i<8; i++) {
+ mach_alphanum(i, halted[i]);
+ }
+ asm __volatile__ ("synco");
+ }
+#endif
+
+ asm __volatile__ ("sleep");
+ asm __volatile__ ("synci");
+ asm __volatile__ ("nop");
+ asm __volatile__ ("nop");
+ asm __volatile__ ("nop");
+ asm __volatile__ ("nop");
+ panic("Unexpected wakeup!\n");
+}
+
+static struct resource rtc_resources[] = {
+ [0] = {
+ /* RTC base, filled in by rtc_init */
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ /* Period IRQ */
+ .start = IRQ_PRI,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* Carry IRQ */
+ .start = IRQ_CUI,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ /* Alarm IRQ */
+ .start = IRQ_ATI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
+static int __init rtc_init(void)
+{
+ rtc_resources[0].start = rtc_base;
+ rtc_resources[0].end = rtc_resources[0].start + 0x58 - 1;
+
+ return platform_device_register(&rtc_device);
+}
+device_initcall(rtc_init);