|  | /* | 
|  | * Copyright (c) 2004 Video54 Technologies, Inc. | 
|  | * Copyright (c) 2004-2008 Atheros Communications, Inc. | 
|  | * | 
|  | * Permission to use, copy, modify, and/or distribute this software for any | 
|  | * purpose with or without fee is hereby granted, provided that the above | 
|  | * copyright notice and this permission notice appear in all copies. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | 
|  | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | 
|  | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | 
|  | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | 
|  | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | 
|  | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | 
|  | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | 
|  | */ | 
|  |  | 
|  | #include "core.h" | 
|  |  | 
|  | static struct ath_rate_table ar5416_11na_ratetable = { | 
|  | 42, | 
|  | { | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */ | 
|  | 5400, 0x0b, 0x00, 12, | 
|  | 0, 2, 1, 0, 0, 0, 0, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */ | 
|  | 7800,  0x0f, 0x00, 18, | 
|  | 0, 3, 1, 1, 1, 1, 1, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */ | 
|  | 10000, 0x0a, 0x00, 24, | 
|  | 2, 4, 2, 2, 2, 2, 2, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */ | 
|  | 13900, 0x0e, 0x00, 36, | 
|  | 2, 6,  2, 3, 3, 3, 3, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */ | 
|  | 17300, 0x09, 0x00, 48, | 
|  | 4, 10, 3, 4, 4, 4, 4, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */ | 
|  | 23000, 0x0d, 0x00, 72, | 
|  | 4, 14, 3, 5, 5, 5, 5, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */ | 
|  | 27400, 0x08, 0x00, 96, | 
|  | 4, 20, 3, 6, 6, 6, 6, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */ | 
|  | 29300, 0x0c, 0x00, 108, | 
|  | 4, 23, 3, 7, 7, 7, 7, 0 }, | 
|  | { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 6500, /* 6.5 Mb */ | 
|  | 6400, 0x80, 0x00, 0, | 
|  | 0, 2, 3, 8, 24, 8, 24, 3216 }, | 
|  | { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 13000, /* 13 Mb */ | 
|  | 12700, 0x81, 0x00, 1, | 
|  | 2, 4, 3, 9, 25, 9, 25, 6434 }, | 
|  | { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 19500, /* 19.5 Mb */ | 
|  | 18800, 0x82, 0x00, 2, | 
|  | 2, 6, 3, 10, 26, 10, 26, 9650 }, | 
|  | { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 26000, /* 26 Mb */ | 
|  | 25000, 0x83, 0x00, 3, | 
|  | 4, 10, 3, 11, 27, 11, 27, 12868 }, | 
|  | { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 39000, /* 39 Mb */ | 
|  | 36700, 0x84, 0x00, 4, | 
|  | 4, 14, 3, 12, 28, 12, 28, 19304 }, | 
|  | { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 52000, /* 52 Mb */ | 
|  | 48100, 0x85, 0x00, 5, | 
|  | 4, 20, 3, 13, 29, 13, 29, 25740 }, | 
|  | { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 58500, /* 58.5 Mb */ | 
|  | 53500, 0x86, 0x00, 6, | 
|  | 4, 23, 3, 14, 30, 14, 30,  28956 }, | 
|  | { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 65000, /* 65 Mb */ | 
|  | 59000, 0x87, 0x00, 7, | 
|  | 4, 25, 3, 15, 31, 15, 32, 32180 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 13000, /* 13 Mb */ | 
|  | 12700, 0x88, 0x00, | 
|  | 8, 0, 2, 3, 16, 33, 16, 33, 6430 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 26000, /* 26 Mb */ | 
|  | 24800, 0x89, 0x00, 9, | 
|  | 2, 4, 3, 17, 34, 17, 34, 12860 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 39000, /* 39 Mb */ | 
|  | 36600, 0x8a, 0x00, 10, | 
|  | 2, 6, 3, 18, 35, 18, 35, 19300 }, | 
|  | { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 52000, /* 52 Mb */ | 
|  | 48100, 0x8b, 0x00, 11, | 
|  | 4, 10, 3, 19, 36, 19, 36, 25736 }, | 
|  | { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 78000, /* 78 Mb */ | 
|  | 69500, 0x8c, 0x00, 12, | 
|  | 4, 14, 3, 20, 37, 20, 37, 38600 }, | 
|  | { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 104000, /* 104 Mb */ | 
|  | 89500, 0x8d, 0x00, 13, | 
|  | 4, 20, 3, 21, 38, 21, 38, 51472 }, | 
|  | { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 117000, /* 117 Mb */ | 
|  | 98900, 0x8e, 0x00, 14, | 
|  | 4, 23, 3, 22, 39, 22, 39, 57890 }, | 
|  | { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 130000, /* 130 Mb */ | 
|  | 108300, 0x8f, 0x00, 15, | 
|  | 4, 25, 3, 23, 40, 23, 41, 64320 }, | 
|  | { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 13500, /* 13.5 Mb */ | 
|  | 13200, 0x80, 0x00, 0, | 
|  | 0, 2, 3, 8, 24, 24, 24, 6684 }, | 
|  | { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 27500, /* 27.0 Mb */ | 
|  | 25900, 0x81, 0x00, 1, | 
|  | 2, 4, 3, 9, 25, 25, 25, 13368 }, | 
|  | { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 40500, /* 40.5 Mb */ | 
|  | 38600, 0x82, 0x00, 2, | 
|  | 2, 6, 3, 10, 26, 26, 26, 20052 }, | 
|  | { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 54000, /* 54 Mb */ | 
|  | 49800, 0x83, 0x00, 3, | 
|  | 4, 10, 3, 11, 27, 27, 27, 26738 }, | 
|  | { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 81500, /* 81 Mb */ | 
|  | 72200, 0x84, 0x00, 4, | 
|  | 4, 14, 3, 12, 28, 28, 28, 40104 }, | 
|  | { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 108000, /* 108 Mb */ | 
|  | 92900, 0x85, 0x00, 5, | 
|  | 4, 20, 3, 13, 29, 29, 29, 53476 }, | 
|  | { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 121500, /* 121.5 Mb */ | 
|  | 102700, 0x86, 0x00, 6, | 
|  | 4, 23, 3, 14, 30, 30, 30, 60156 }, | 
|  | { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 135000, /* 135 Mb */ | 
|  | 112000, 0x87, 0x00, 7, | 
|  | 4, 25, 3, 15, 31, 32, 32, 66840 }, | 
|  | { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */ | 
|  | 122000, 0x87, 0x00, 7, | 
|  | 4, 25, 3, 15, 31, 32, 32, 74200 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 27000, /* 27 Mb */ | 
|  | 25800, 0x88, 0x00, 8, | 
|  | 0, 2, 3, 16, 33, 33, 33, 13360 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 54000, /* 54 Mb */ | 
|  | 49800, 0x89, 0x00, 9, | 
|  | 2, 4, 3, 17, 34, 34, 34, 26720 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 81000, /* 81 Mb */ | 
|  | 71900, 0x8a, 0x00, 10, | 
|  | 2, 6, 3, 18, 35, 35, 35, 40080 }, | 
|  | { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 108000, /* 108 Mb */ | 
|  | 92500, 0x8b, 0x00, 11, | 
|  | 4, 10, 3, 19, 36, 36, 36, 53440 }, | 
|  | { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 162000, /* 162 Mb */ | 
|  | 130300, 0x8c, 0x00, 12, | 
|  | 4, 14, 3, 20, 37, 37, 37, 80160 }, | 
|  | { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 216000, /* 216 Mb */ | 
|  | 162800, 0x8d, 0x00, 13, | 
|  | 4, 20, 3, 21, 38, 38, 38, 106880 }, | 
|  | { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 243000, /* 243 Mb */ | 
|  | 178200, 0x8e, 0x00, 14, | 
|  | 4, 23, 3, 22, 39, 39, 39, 120240 }, | 
|  | { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 270000, /* 270 Mb */ | 
|  | 192100, 0x8f, 0x00, 15, | 
|  | 4, 25, 3, 23, 40, 41, 41, 133600 }, | 
|  | { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */ | 
|  | 207000, 0x8f, 0x00, 15, | 
|  | 4, 25, 3, 23, 40, 41, 41, 148400 }, | 
|  | }, | 
|  | 50,  /* probe interval */ | 
|  | 50,  /* rssi reduce interval */ | 
|  | WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */ | 
|  | }; | 
|  |  | 
|  | /* 4ms frame limit not used for NG mode.  The values filled | 
|  | * for HT are the 64K max aggregate limit */ | 
|  |  | 
|  | static struct ath_rate_table ar5416_11ng_ratetable = { | 
|  | 46, | 
|  | { | 
|  | { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */ | 
|  | 900, 0x1b, 0x00, 2, | 
|  | 0, 0, 1, 0, 0, 0, 0, 0 }, | 
|  | { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */ | 
|  | 1900, 0x1a, 0x04, 4, | 
|  | 1, 1, 1, 1, 1, 1, 1, 0 }, | 
|  | { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */ | 
|  | 4900, 0x19, 0x04, 11, | 
|  | 2, 2, 2, 2, 2, 2, 2, 0 }, | 
|  | { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */ | 
|  | 8100, 0x18, 0x04, 22, | 
|  | 3, 3, 2, 3, 3, 3, 3, 0 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */ | 
|  | 5400, 0x0b, 0x00, 12, | 
|  | 4, 2, 1, 4, 4, 4, 4, 0 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */ | 
|  | 7800, 0x0f, 0x00, 18, | 
|  | 4, 3, 1, 5, 5, 5, 5, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */ | 
|  | 10100, 0x0a, 0x00, 24, | 
|  | 6, 4, 1, 6, 6, 6, 6, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */ | 
|  | 14100,  0x0e, 0x00, 36, | 
|  | 6, 6, 2, 7, 7, 7, 7, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */ | 
|  | 17700, 0x09, 0x00, 48, | 
|  | 8, 10, 3, 8, 8, 8, 8, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */ | 
|  | 23700, 0x0d, 0x00, 72, | 
|  | 8, 14, 3, 9, 9, 9, 9, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */ | 
|  | 27400, 0x08, 0x00, 96, | 
|  | 8, 20, 3, 10, 10, 10, 10, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */ | 
|  | 30900, 0x0c, 0x00, 108, | 
|  | 8, 23, 3, 11, 11, 11, 11, 0 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_20_SS, 6500, /* 6.5 Mb */ | 
|  | 6400, 0x80, 0x00, 0, | 
|  | 4, 2, 3, 12, 28, 12, 28, 3216 }, | 
|  | { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 13000, /* 13 Mb */ | 
|  | 12700, 0x81, 0x00, 1, | 
|  | 6, 4, 3, 13, 29, 13, 29, 6434 }, | 
|  | { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 19500, /* 19.5 Mb */ | 
|  | 18800, 0x82, 0x00, 2, | 
|  | 6, 6, 3, 14, 30, 14, 30, 9650 }, | 
|  | { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 26000, /* 26 Mb */ | 
|  | 25000, 0x83, 0x00, 3, | 
|  | 8, 10, 3, 15, 31, 15, 31, 12868 }, | 
|  | { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 39000, /* 39 Mb */ | 
|  | 36700, 0x84, 0x00, 4, | 
|  | 8, 14, 3, 16, 32, 16, 32, 19304 }, | 
|  | { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 52000, /* 52 Mb */ | 
|  | 48100, 0x85, 0x00, 5, | 
|  | 8, 20, 3, 17, 33, 17, 33, 25740 }, | 
|  | { INVALID,  VALID_20, WLAN_RC_PHY_HT_20_SS, 58500, /* 58.5 Mb */ | 
|  | 53500, 0x86, 0x00, 6, | 
|  | 8, 23, 3, 18, 34, 18, 34, 28956 }, | 
|  | { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 65000, /* 65 Mb */ | 
|  | 59000, 0x87, 0x00, 7, | 
|  | 8, 25, 3, 19, 35, 19, 36, 32180 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 13000, /* 13 Mb */ | 
|  | 12700, 0x88, 0x00, 8, | 
|  | 4, 2, 3, 20, 37, 20, 37, 6430 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 26000, /* 26 Mb */ | 
|  | 24800, 0x89, 0x00, 9, | 
|  | 6, 4, 3, 21, 38, 21, 38, 12860 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 39000, /* 39 Mb */ | 
|  | 36600, 0x8a, 0x00, 10, | 
|  | 6, 6, 3, 22, 39, 22, 39, 19300 }, | 
|  | { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 52000, /* 52 Mb */ | 
|  | 48100, 0x8b, 0x00, 11, | 
|  | 8, 10, 3, 23, 40, 23, 40, 25736 }, | 
|  | { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 78000, /* 78 Mb */ | 
|  | 69500, 0x8c, 0x00, 12, | 
|  | 8, 14, 3, 24, 41, 24, 41, 38600 }, | 
|  | { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 104000, /* 104 Mb */ | 
|  | 89500, 0x8d, 0x00, 13, | 
|  | 8, 20, 3, 25, 42, 25, 42, 51472 }, | 
|  | { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 117000, /* 117 Mb */ | 
|  | 98900, 0x8e, 0x00, 14, | 
|  | 8, 23, 3, 26, 43, 26, 44, 57890 }, | 
|  | { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 130000, /* 130 Mb */ | 
|  | 108300, 0x8f, 0x00, 15, | 
|  | 8, 25, 3, 27, 44, 27, 45, 64320 }, | 
|  | { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 13500, /* 13.5 Mb */ | 
|  | 13200, 0x80, 0x00, 0, | 
|  | 8, 2, 3, 12, 28, 28, 28, 6684 }, | 
|  | { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 27500, /* 27.0 Mb */ | 
|  | 25900, 0x81, 0x00, 1, | 
|  | 8, 4, 3, 13, 29, 29, 29, 13368 }, | 
|  | { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 40500, /* 40.5 Mb */ | 
|  | 38600, 0x82, 0x00, 2, | 
|  | 8, 6, 3, 14, 30, 30, 30, 20052 }, | 
|  | { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 54000, /* 54 Mb */ | 
|  | 49800, 0x83, 0x00, 3, | 
|  | 8, 10, 3, 15, 31, 31, 31, 26738 }, | 
|  | { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 81500, /* 81 Mb */ | 
|  | 72200, 0x84, 0x00, 4, | 
|  | 8, 14, 3, 16, 32, 32, 32, 40104 }, | 
|  | { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 108000, /* 108 Mb */ | 
|  | 92900, 0x85, 0x00, 5, | 
|  | 8, 20, 3, 17, 33, 33, 33, 53476 }, | 
|  | { INVALID,  VALID_40, WLAN_RC_PHY_HT_40_SS, 121500, /* 121.5 Mb */ | 
|  | 102700, 0x86, 0x00, 6, | 
|  | 8, 23, 3, 18, 34, 34, 34, 60156 }, | 
|  | { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 135000, /* 135 Mb */ | 
|  | 112000, 0x87, 0x00, 7, | 
|  | 8, 23, 3, 19, 35, 36, 36, 66840 }, | 
|  | { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */ | 
|  | 122000, 0x87, 0x00, 7, | 
|  | 8, 25, 3, 19, 35, 36, 36, 74200 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 27000, /* 27 Mb */ | 
|  | 25800, 0x88, 0x00, 8, | 
|  | 8, 2, 3, 20, 37, 37, 37, 13360 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 54000, /* 54 Mb */ | 
|  | 49800, 0x89, 0x00, 9, | 
|  | 8, 4, 3, 21, 38, 38, 38, 26720 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 81000, /* 81 Mb */ | 
|  | 71900, 0x8a, 0x00, 10, | 
|  | 8, 6, 3, 22, 39, 39, 39, 40080 }, | 
|  | { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 108000, /* 108 Mb */ | 
|  | 92500, 0x8b, 0x00, 11, | 
|  | 8, 10, 3, 23, 40, 40, 40, 53440 }, | 
|  | { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 162000, /* 162 Mb */ | 
|  | 130300, 0x8c, 0x00, 12, | 
|  | 8, 14, 3, 24, 41, 41, 41, 80160 }, | 
|  | { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 216000, /* 216 Mb */ | 
|  | 162800, 0x8d, 0x00, 13, | 
|  | 8, 20, 3, 25, 42, 42, 42, 106880 }, | 
|  | { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 243000, /* 243 Mb */ | 
|  | 178200, 0x8e, 0x00, 14, | 
|  | 8, 23, 3, 26, 43, 43, 43, 120240 }, | 
|  | { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 270000, /* 270 Mb */ | 
|  | 192100, 0x8f, 0x00, 15, | 
|  | 8, 23, 3, 27, 44, 45, 45, 133600 }, | 
|  | { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */ | 
|  | 207000, 0x8f, 0x00, 15, | 
|  | 8, 25, 3, 27, 44, 45, 45, 148400 }, | 
|  | }, | 
|  | 50,  /* probe interval */ | 
|  | 50,  /* rssi reduce interval */ | 
|  | WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */ | 
|  | }; | 
|  |  | 
|  | static struct ath_rate_table ar5416_11a_ratetable = { | 
|  | 8, | 
|  | { | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */ | 
|  | 5400, 0x0b, 0x00, (0x80|12), | 
|  | 0, 2, 1, 0, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */ | 
|  | 7800, 0x0f, 0x00, 18, | 
|  | 0, 3, 1, 1, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */ | 
|  | 10000, 0x0a, 0x00, (0x80|24), | 
|  | 2, 4, 2, 2, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */ | 
|  | 13900, 0x0e, 0x00, 36, | 
|  | 2, 6, 2, 3, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */ | 
|  | 17300, 0x09, 0x00, (0x80|48), | 
|  | 4, 10, 3, 4, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */ | 
|  | 23000, 0x0d, 0x00, 72, | 
|  | 4, 14, 3, 5, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */ | 
|  | 27400, 0x08, 0x00, 96, | 
|  | 4, 19, 3, 6, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */ | 
|  | 29300, 0x0c, 0x00, 108, | 
|  | 4, 23, 3, 7, 0 }, | 
|  | }, | 
|  | 50,  /* probe interval */ | 
|  | 50,  /* rssi reduce interval */ | 
|  | 0,   /* Phy rates allowed initially */ | 
|  | }; | 
|  |  | 
|  | static struct ath_rate_table ar5416_11g_ratetable = { | 
|  | 12, | 
|  | { | 
|  | { VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */ | 
|  | 900, 0x1b, 0x00, 2, | 
|  | 0, 0, 1, 0, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */ | 
|  | 1900, 0x1a, 0x04, 4, | 
|  | 1, 1, 1, 1, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */ | 
|  | 4900, 0x19, 0x04, 11, | 
|  | 2, 2, 2, 2, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */ | 
|  | 8100, 0x18, 0x04, 22, | 
|  | 3, 3, 2, 3, 0 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */ | 
|  | 5400, 0x0b, 0x00, 12, | 
|  | 4, 2, 1, 4, 0 }, | 
|  | { INVALID, INVALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */ | 
|  | 7800, 0x0f, 0x00, 18, | 
|  | 4, 3, 1, 5, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */ | 
|  | 10000, 0x0a, 0x00, 24, | 
|  | 6, 4, 1, 6, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */ | 
|  | 13900, 0x0e, 0x00, 36, | 
|  | 6, 6, 2, 7, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */ | 
|  | 17300, 0x09, 0x00, 48, | 
|  | 8, 10, 3, 8, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */ | 
|  | 23000, 0x0d, 0x00, 72, | 
|  | 8, 14, 3, 9, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */ | 
|  | 27400, 0x08, 0x00, 96, | 
|  | 8, 19, 3, 10, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */ | 
|  | 29300, 0x0c, 0x00, 108, | 
|  | 8, 23, 3, 11, 0 }, | 
|  | }, | 
|  | 50,  /* probe interval */ | 
|  | 50,  /* rssi reduce interval */ | 
|  | 0,   /* Phy rates allowed initially */ | 
|  | }; | 
|  |  | 
|  | static struct ath_rate_table ar5416_11b_ratetable = { | 
|  | 4, | 
|  | { | 
|  | { VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */ | 
|  | 900, 0x1b,  0x00, (0x80|2), | 
|  | 0, 0, 1, 0, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */ | 
|  | 1800, 0x1a, 0x04, (0x80|4), | 
|  | 1, 1, 1, 1, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */ | 
|  | 4300, 0x19, 0x04, (0x80|11), | 
|  | 1, 2, 2, 2, 0 }, | 
|  | { VALID, VALID, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */ | 
|  | 7100, 0x18, 0x04, (0x80|22), | 
|  | 1, 4, 100, 3, 0 }, | 
|  | }, | 
|  | 100, /* probe interval */ | 
|  | 100, /* rssi reduce interval */ | 
|  | 0,   /* Phy rates allowed initially */ | 
|  | }; | 
|  |  | 
|  | static inline int8_t median(int8_t a, int8_t b, int8_t c) | 
|  | { | 
|  | if (a >= b) { | 
|  | if (b >= c) | 
|  | return b; | 
|  | else if (a > c) | 
|  | return c; | 
|  | else | 
|  | return a; | 
|  | } else { | 
|  | if (a >= c) | 
|  | return a; | 
|  | else if (b >= c) | 
|  | return c; | 
|  | else | 
|  | return b; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath_rc_sort_validrates(struct ath_rate_table *rate_table, | 
|  | struct ath_rate_priv *ath_rc_priv) | 
|  | { | 
|  | u8 i, j, idx, idx_next; | 
|  |  | 
|  | for (i = ath_rc_priv->max_valid_rate - 1; i > 0; i--) { | 
|  | for (j = 0; j <= i-1; j++) { | 
|  | idx = ath_rc_priv->valid_rate_index[j]; | 
|  | idx_next = ath_rc_priv->valid_rate_index[j+1]; | 
|  |  | 
|  | if (rate_table->info[idx].ratekbps > | 
|  | rate_table->info[idx_next].ratekbps) { | 
|  | ath_rc_priv->valid_rate_index[j] = idx_next; | 
|  | ath_rc_priv->valid_rate_index[j+1] = idx; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath_rc_init_valid_txmask(struct ath_rate_priv *ath_rc_priv) | 
|  | { | 
|  | u8 i; | 
|  |  | 
|  | for (i = 0; i < ath_rc_priv->rate_table_size; i++) | 
|  | ath_rc_priv->valid_rate_index[i] = 0; | 
|  | } | 
|  |  | 
|  | static inline void ath_rc_set_valid_txmask(struct ath_rate_priv *ath_rc_priv, | 
|  | u8 index, int valid_tx_rate) | 
|  | { | 
|  | ASSERT(index <= ath_rc_priv->rate_table_size); | 
|  | ath_rc_priv->valid_rate_index[index] = valid_tx_rate ? 1 : 0; | 
|  | } | 
|  |  | 
|  | static inline int ath_rc_isvalid_txmask(struct ath_rate_priv *ath_rc_priv, | 
|  | u8 index) | 
|  | { | 
|  | ASSERT(index <= ath_rc_priv->rate_table_size); | 
|  | return ath_rc_priv->valid_rate_index[index]; | 
|  | } | 
|  |  | 
|  | static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, | 
|  | struct ath_rate_priv *ath_rc_priv, | 
|  | u8 cur_valid_txrate, | 
|  | u8 *next_idx) | 
|  | { | 
|  | u8 i; | 
|  |  | 
|  | for (i = 0; i < ath_rc_priv->max_valid_rate - 1; i++) { | 
|  | if (ath_rc_priv->valid_rate_index[i] == cur_valid_txrate) { | 
|  | *next_idx = ath_rc_priv->valid_rate_index[i+1]; | 
|  | return 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* No more valid rates */ | 
|  | *next_idx = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Return true only for single stream */ | 
|  |  | 
|  | static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw) | 
|  | { | 
|  | if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG)) | 
|  | return 0; | 
|  | if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG)) | 
|  | return 0; | 
|  | if (WLAN_RC_PHY_SGI(phy) && !(capflag & WLAN_RC_SGI_FLAG)) | 
|  | return 0; | 
|  | if (!ignore_cw && WLAN_RC_PHY_HT(phy)) | 
|  | if (WLAN_RC_PHY_40(phy) && !(capflag & WLAN_RC_40_FLAG)) | 
|  | return 0; | 
|  | if (!WLAN_RC_PHY_40(phy) && (capflag & WLAN_RC_40_FLAG)) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table, | 
|  | struct ath_rate_priv *ath_rc_priv, | 
|  | u8 cur_valid_txrate, u8 *next_idx) | 
|  | { | 
|  | int8_t i; | 
|  |  | 
|  | for (i = 1; i < ath_rc_priv->max_valid_rate ; i++) { | 
|  | if (ath_rc_priv->valid_rate_index[i] == cur_valid_txrate) { | 
|  | *next_idx = ath_rc_priv->valid_rate_index[i-1]; | 
|  | return 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv, | 
|  | struct ath_rate_table *rate_table, | 
|  | u32 capflag) | 
|  | { | 
|  | u8 i, hi = 0; | 
|  | u32 valid; | 
|  |  | 
|  | for (i = 0; i < rate_table->rate_cnt; i++) { | 
|  | valid = (ath_rc_priv->single_stream ? | 
|  | rate_table->info[i].valid_single_stream : | 
|  | rate_table->info[i].valid); | 
|  | if (valid == 1) { | 
|  | u32 phy = rate_table->info[i].phy; | 
|  | u8 valid_rate_count = 0; | 
|  |  | 
|  | if (!ath_rc_valid_phyrate(phy, capflag, 0)) | 
|  | continue; | 
|  |  | 
|  | valid_rate_count = ath_rc_priv->valid_phy_ratecnt[phy]; | 
|  |  | 
|  | ath_rc_priv->valid_phy_rateidx[phy][valid_rate_count] = i; | 
|  | ath_rc_priv->valid_phy_ratecnt[phy] += 1; | 
|  | ath_rc_set_valid_txmask(ath_rc_priv, i, 1); | 
|  | hi = A_MAX(hi, i); | 
|  | } | 
|  | } | 
|  |  | 
|  | return hi; | 
|  | } | 
|  |  | 
|  | static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv, | 
|  | struct ath_rate_table *rate_table, | 
|  | struct ath_rateset *rateset, | 
|  | u32 capflag) | 
|  | { | 
|  | u8 i, j, hi = 0; | 
|  |  | 
|  | /* Use intersection of working rates and valid rates */ | 
|  | for (i = 0; i < rateset->rs_nrates; i++) { | 
|  | for (j = 0; j < rate_table->rate_cnt; j++) { | 
|  | u32 phy = rate_table->info[j].phy; | 
|  | u32 valid = (ath_rc_priv->single_stream ? | 
|  | rate_table->info[j].valid_single_stream : | 
|  | rate_table->info[j].valid); | 
|  | u8 rate = rateset->rs_rates[i]; | 
|  | u8 dot11rate = rate_table->info[j].dot11rate; | 
|  |  | 
|  | /* We allow a rate only if its valid and the | 
|  | * capflag matches one of the validity | 
|  | * (VALID/VALID_20/VALID_40) flags */ | 
|  |  | 
|  | if (((rate & 0x7F) == (dot11rate & 0x7F)) && | 
|  | ((valid & WLAN_RC_CAP_MODE(capflag)) == | 
|  | WLAN_RC_CAP_MODE(capflag)) && | 
|  | !WLAN_RC_PHY_HT(phy)) { | 
|  | u8 valid_rate_count = 0; | 
|  |  | 
|  | if (!ath_rc_valid_phyrate(phy, capflag, 0)) | 
|  | continue; | 
|  |  | 
|  | valid_rate_count = | 
|  | ath_rc_priv->valid_phy_ratecnt[phy]; | 
|  |  | 
|  | ath_rc_priv->valid_phy_rateidx[phy] | 
|  | [valid_rate_count] = j; | 
|  | ath_rc_priv->valid_phy_ratecnt[phy] += 1; | 
|  | ath_rc_set_valid_txmask(ath_rc_priv, j, 1); | 
|  | hi = A_MAX(hi, j); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return hi; | 
|  | } | 
|  |  | 
|  | static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv, | 
|  | struct ath_rate_table *rate_table, | 
|  | u8 *mcs_set, u32 capflag) | 
|  | { | 
|  | struct ath_rateset *rateset = (struct ath_rateset *)mcs_set; | 
|  |  | 
|  | u8 i, j, hi = 0; | 
|  |  | 
|  | /* Use intersection of working rates and valid rates */ | 
|  | for (i = 0; i < rateset->rs_nrates; i++) { | 
|  | for (j = 0; j < rate_table->rate_cnt; j++) { | 
|  | u32 phy = rate_table->info[j].phy; | 
|  | u32 valid = (ath_rc_priv->single_stream ? | 
|  | rate_table->info[j].valid_single_stream : | 
|  | rate_table->info[j].valid); | 
|  | u8 rate = rateset->rs_rates[i]; | 
|  | u8 dot11rate = rate_table->info[j].dot11rate; | 
|  |  | 
|  | if (((rate & 0x7F) != (dot11rate & 0x7F)) || | 
|  | !WLAN_RC_PHY_HT(phy) || | 
|  | !WLAN_RC_PHY_HT_VALID(valid, capflag)) | 
|  | continue; | 
|  |  | 
|  | if (!ath_rc_valid_phyrate(phy, capflag, 0)) | 
|  | continue; | 
|  |  | 
|  | ath_rc_priv->valid_phy_rateidx[phy] | 
|  | [ath_rc_priv->valid_phy_ratecnt[phy]] = j; | 
|  | ath_rc_priv->valid_phy_ratecnt[phy] += 1; | 
|  | ath_rc_set_valid_txmask(ath_rc_priv, j, 1); | 
|  | hi = A_MAX(hi, j); | 
|  | } | 
|  | } | 
|  |  | 
|  | return hi; | 
|  | } | 
|  |  | 
|  | static u8 ath_rc_ratefind_ht(struct ath_softc *sc, | 
|  | struct ath_rate_priv *ath_rc_priv, | 
|  | struct ath_rate_table *rate_table, | 
|  | int probe_allowed, int *is_probing, | 
|  | int is_retry) | 
|  | { | 
|  | u32 dt, best_thruput, this_thruput, now_msec; | 
|  | u8 rate, next_rate, best_rate, maxindex, minindex; | 
|  | int8_t  rssi_last, rssi_reduce = 0, index = 0; | 
|  |  | 
|  | *is_probing = 0; | 
|  |  | 
|  | rssi_last = median(ath_rc_priv->rssi_last, | 
|  | ath_rc_priv->rssi_last_prev, | 
|  | ath_rc_priv->rssi_last_prev2); | 
|  |  | 
|  | /* | 
|  | * Age (reduce) last ack rssi based on how old it is. | 
|  | * The bizarre numbers are so the delta is 160msec, | 
|  | * meaning we divide by 16. | 
|  | *   0msec   <= dt <= 25msec:   don't derate | 
|  | *   25msec  <= dt <= 185msec:  derate linearly from 0 to 10dB | 
|  | *   185msec <= dt:             derate by 10dB | 
|  | */ | 
|  |  | 
|  | now_msec = jiffies_to_msecs(jiffies); | 
|  | dt = now_msec - ath_rc_priv->rssi_time; | 
|  |  | 
|  | if (dt >= 185) | 
|  | rssi_reduce = 10; | 
|  | else if (dt >= 25) | 
|  | rssi_reduce = (u8)((dt - 25) >> 4); | 
|  |  | 
|  | /* Now reduce rssi_last by rssi_reduce */ | 
|  | if (rssi_last < rssi_reduce) | 
|  | rssi_last = 0; | 
|  | else | 
|  | rssi_last -= rssi_reduce; | 
|  |  | 
|  | /* | 
|  | * Now look up the rate in the rssi table and return it. | 
|  | * If no rates match then we return 0 (lowest rate) | 
|  | */ | 
|  |  | 
|  | best_thruput = 0; | 
|  | maxindex = ath_rc_priv->max_valid_rate-1; | 
|  |  | 
|  | minindex = 0; | 
|  | best_rate = minindex; | 
|  |  | 
|  | /* | 
|  | * Try the higher rate first. It will reduce memory moving time | 
|  | * if we have very good channel characteristics. | 
|  | */ | 
|  | for (index = maxindex; index >= minindex ; index--) { | 
|  | u8 per_thres; | 
|  |  | 
|  | rate = ath_rc_priv->valid_rate_index[index]; | 
|  | if (rate > ath_rc_priv->rate_max_phy) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * For TCP the average collision rate is around 11%, | 
|  | * so we ignore PERs less than this.  This is to | 
|  | * prevent the rate we are currently using (whose | 
|  | * PER might be in the 10-15 range because of TCP | 
|  | * collisions) looking worse than the next lower | 
|  | * rate whose PER has decayed close to 0.  If we | 
|  | * used to next lower rate, its PER would grow to | 
|  | * 10-15 and we would be worse off then staying | 
|  | * at the current rate. | 
|  | */ | 
|  | per_thres = ath_rc_priv->state[rate].per; | 
|  | if (per_thres < 12) | 
|  | per_thres = 12; | 
|  |  | 
|  | this_thruput = rate_table->info[rate].user_ratekbps * | 
|  | (100 - per_thres); | 
|  |  | 
|  | if (best_thruput <= this_thruput) { | 
|  | best_thruput = this_thruput; | 
|  | best_rate    = rate; | 
|  | } | 
|  | } | 
|  |  | 
|  | rate = best_rate; | 
|  |  | 
|  | /* if we are retrying for more than half the number | 
|  | * of max retries, use the min rate for the next retry | 
|  | */ | 
|  | if (is_retry) | 
|  | rate = ath_rc_priv->valid_rate_index[minindex]; | 
|  |  | 
|  | ath_rc_priv->rssi_last_lookup = rssi_last; | 
|  |  | 
|  | /* | 
|  | * Must check the actual rate (ratekbps) to account for | 
|  | * non-monoticity of 11g's rate table | 
|  | */ | 
|  |  | 
|  | if (rate >= ath_rc_priv->rate_max_phy && probe_allowed) { | 
|  | rate = ath_rc_priv->rate_max_phy; | 
|  |  | 
|  | /* Probe the next allowed phy state */ | 
|  | /* FIXME:XXXX Check to make sure ratMax is checked properly */ | 
|  | if (ath_rc_get_nextvalid_txrate(rate_table, | 
|  | ath_rc_priv, rate, &next_rate) && | 
|  | (now_msec - ath_rc_priv->probe_time > | 
|  | rate_table->probe_interval) && | 
|  | (ath_rc_priv->hw_maxretry_pktcnt >= 1)) { | 
|  | rate = next_rate; | 
|  | ath_rc_priv->probe_rate = rate; | 
|  | ath_rc_priv->probe_time = now_msec; | 
|  | ath_rc_priv->hw_maxretry_pktcnt = 0; | 
|  | *is_probing = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (rate > (ath_rc_priv->rate_table_size - 1)) | 
|  | rate = ath_rc_priv->rate_table_size - 1; | 
|  |  | 
|  | ASSERT((rate_table->info[rate].valid && !ath_rc_priv->single_stream) || | 
|  | (rate_table->info[rate].valid_single_stream && | 
|  | ath_rc_priv->single_stream)); | 
|  |  | 
|  | return rate; | 
|  | } | 
|  |  | 
|  | static void ath_rc_rate_set_series(struct ath_rate_table *rate_table , | 
|  | struct ieee80211_tx_rate *rate, | 
|  | u8 tries, u8 rix, int rtsctsenable) | 
|  | { | 
|  | rate->count = tries; | 
|  | rate->idx = rix; | 
|  |  | 
|  | if (rtsctsenable) | 
|  | rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS; | 
|  | if (WLAN_RC_PHY_40(rate_table->info[rix].phy)) | 
|  | rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; | 
|  | if (WLAN_RC_PHY_SGI(rate_table->info[rix].phy)) | 
|  | rate->flags |= IEEE80211_TX_RC_SHORT_GI; | 
|  | if (WLAN_RC_PHY_HT(rate_table->info[rix].phy)) | 
|  | rate->flags |= IEEE80211_TX_RC_MCS; | 
|  | } | 
|  |  | 
|  | static u8 ath_rc_rate_getidx(struct ath_softc *sc, | 
|  | struct ath_rate_priv *ath_rc_priv, | 
|  | struct ath_rate_table *rate_table, | 
|  | u8 rix, u16 stepdown, | 
|  | u16 min_rate) | 
|  | { | 
|  | u32 j; | 
|  | u8 nextindex; | 
|  |  | 
|  | if (min_rate) { | 
|  | for (j = RATE_TABLE_SIZE; j > 0; j--) { | 
|  | if (ath_rc_get_nextlowervalid_txrate(rate_table, | 
|  | ath_rc_priv, rix, &nextindex)) | 
|  | rix = nextindex; | 
|  | else | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | for (j = stepdown; j > 0; j--) { | 
|  | if (ath_rc_get_nextlowervalid_txrate(rate_table, | 
|  | ath_rc_priv, rix, &nextindex)) | 
|  | rix = nextindex; | 
|  | else | 
|  | break; | 
|  | } | 
|  | } | 
|  | return rix; | 
|  | } | 
|  |  | 
|  | static void ath_rc_ratefind(struct ath_softc *sc, | 
|  | struct ath_rate_priv *ath_rc_priv, | 
|  | int num_tries, int num_rates, | 
|  | struct ieee80211_tx_info *tx_info, int *is_probe, | 
|  | int is_retry) | 
|  | { | 
|  | u8 try_per_rate = 0, i = 0, rix, nrix; | 
|  | struct ath_rate_table *rate_table; | 
|  | struct ieee80211_tx_rate *rates = tx_info->control.rates; | 
|  |  | 
|  | rate_table = sc->cur_rate_table; | 
|  | rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, 1, | 
|  | is_probe, is_retry); | 
|  | nrix = rix; | 
|  |  | 
|  | if (*is_probe) { | 
|  | /* set one try for probe rates. For the | 
|  | * probes don't enable rts */ | 
|  | ath_rc_rate_set_series(rate_table, | 
|  | &rates[i++], 1, nrix, 0); | 
|  |  | 
|  | try_per_rate = (num_tries/num_rates); | 
|  | /* Get the next tried/allowed rate. No RTS for the next series | 
|  | * after the probe rate | 
|  | */ | 
|  | nrix = ath_rc_rate_getidx(sc, | 
|  | ath_rc_priv, rate_table, nrix, 1, 0); | 
|  | ath_rc_rate_set_series(rate_table, | 
|  | &rates[i++], try_per_rate, nrix, 0); | 
|  | } else { | 
|  | try_per_rate = (num_tries/num_rates); | 
|  | /* Set the choosen rate. No RTS for first series entry. */ | 
|  | ath_rc_rate_set_series(rate_table, | 
|  | &rates[i++], try_per_rate, nrix, 0); | 
|  | } | 
|  |  | 
|  | /* Fill in the other rates for multirate retry */ | 
|  | for ( ; i < num_rates; i++) { | 
|  | u8 try_num; | 
|  | u8 min_rate; | 
|  |  | 
|  | try_num = ((i + 1) == num_rates) ? | 
|  | num_tries - (try_per_rate * i) : try_per_rate ; | 
|  | min_rate = (((i + 1) == num_rates) && 0); | 
|  |  | 
|  | nrix = ath_rc_rate_getidx(sc, ath_rc_priv, | 
|  | rate_table, nrix, 1, min_rate); | 
|  | /* All other rates in the series have RTS enabled */ | 
|  | ath_rc_rate_set_series(rate_table, | 
|  | &rates[i], try_num, nrix, 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * NB:Change rate series to enable aggregation when operating | 
|  | * at lower MCS rates. When first rate in series is MCS2 | 
|  | * in HT40 @ 2.4GHz, series should look like: | 
|  | * | 
|  | * {MCS2, MCS1, MCS0, MCS0}. | 
|  | * | 
|  | * When first rate in series is MCS3 in HT20 @ 2.4GHz, series should | 
|  | * look like: | 
|  | * | 
|  | * {MCS3, MCS2, MCS1, MCS1} | 
|  | * | 
|  | * So, set fourth rate in series to be same as third one for | 
|  | * above conditions. | 
|  | */ | 
|  | if ((sc->hw->conf.channel->band == IEEE80211_BAND_2GHZ) && | 
|  | (conf_is_ht(&sc->hw->conf))) { | 
|  | u8 dot11rate = rate_table->info[rix].dot11rate; | 
|  | u8 phy = rate_table->info[rix].phy; | 
|  | if (i == 4 && | 
|  | ((dot11rate == 2 && phy == WLAN_RC_PHY_HT_40_SS) || | 
|  | (dot11rate == 3 && phy == WLAN_RC_PHY_HT_20_SS))) { | 
|  | rates[3].idx = rates[2].idx; | 
|  | rates[3].flags = rates[2].flags; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool ath_rc_update_per(struct ath_softc *sc, | 
|  | struct ath_rate_table *rate_table, | 
|  | struct ath_rate_priv *ath_rc_priv, | 
|  | struct ath_tx_info_priv *tx_info_priv, | 
|  | int tx_rate, int xretries, int retries, | 
|  | u32 now_msec) | 
|  | { | 
|  | bool state_change = false; | 
|  | int count; | 
|  | u8 last_per; | 
|  | static u32 nretry_to_per_lookup[10] = { | 
|  | 100 * 0 / 1, | 
|  | 100 * 1 / 4, | 
|  | 100 * 1 / 2, | 
|  | 100 * 3 / 4, | 
|  | 100 * 4 / 5, | 
|  | 100 * 5 / 6, | 
|  | 100 * 6 / 7, | 
|  | 100 * 7 / 8, | 
|  | 100 * 8 / 9, | 
|  | 100 * 9 / 10 | 
|  | }; | 
|  |  | 
|  | last_per = ath_rc_priv->state[tx_rate].per; | 
|  |  | 
|  | if (xretries) { | 
|  | if (xretries == 1) { | 
|  | ath_rc_priv->state[tx_rate].per += 30; | 
|  | if (ath_rc_priv->state[tx_rate].per > 100) | 
|  | ath_rc_priv->state[tx_rate].per = 100; | 
|  | } else { | 
|  | /* xretries == 2 */ | 
|  | count = ARRAY_SIZE(nretry_to_per_lookup); | 
|  | if (retries >= count) | 
|  | retries = count - 1; | 
|  |  | 
|  | /* new_PER = 7/8*old_PER + 1/8*(currentPER) */ | 
|  | ath_rc_priv->state[tx_rate].per = | 
|  | (u8)(last_per - (last_per >> 3) + (100 >> 3)); | 
|  | } | 
|  |  | 
|  | /* xretries == 1 or 2 */ | 
|  |  | 
|  | if (ath_rc_priv->probe_rate == tx_rate) | 
|  | ath_rc_priv->probe_rate = 0; | 
|  |  | 
|  | } else { /* xretries == 0 */ | 
|  | count = ARRAY_SIZE(nretry_to_per_lookup); | 
|  | if (retries >= count) | 
|  | retries = count - 1; | 
|  |  | 
|  | if (tx_info_priv->n_bad_frames) { | 
|  | /* new_PER = 7/8*old_PER + 1/8*(currentPER) | 
|  | * Assuming that n_frames is not 0.  The current PER | 
|  | * from the retries is 100 * retries / (retries+1), | 
|  | * since the first retries attempts failed, and the | 
|  | * next one worked.  For the one that worked, | 
|  | * n_bad_frames subframes out of n_frames wored, | 
|  | * so the PER for that part is | 
|  | * 100 * n_bad_frames / n_frames, and it contributes | 
|  | * 100 * n_bad_frames / (n_frames * (retries+1)) to | 
|  | * the above PER.  The expression below is a | 
|  | * simplified version of the sum of these two terms. | 
|  | */ | 
|  | if (tx_info_priv->n_frames > 0) { | 
|  | int n_frames, n_bad_frames; | 
|  | u8 cur_per, new_per; | 
|  |  | 
|  | n_bad_frames = retries * tx_info_priv->n_frames + | 
|  | tx_info_priv->n_bad_frames; | 
|  | n_frames = tx_info_priv->n_frames * (retries + 1); | 
|  | cur_per = (100 * n_bad_frames / n_frames) >> 3; | 
|  | new_per = (u8)(last_per - (last_per >> 3) + cur_per); | 
|  | ath_rc_priv->state[tx_rate].per = new_per; | 
|  | } | 
|  | } else { | 
|  | ath_rc_priv->state[tx_rate].per = | 
|  | (u8)(last_per - (last_per >> 3) + | 
|  | (nretry_to_per_lookup[retries] >> 3)); | 
|  | } | 
|  |  | 
|  | ath_rc_priv->rssi_last_prev2 = ath_rc_priv->rssi_last_prev; | 
|  | ath_rc_priv->rssi_last_prev  = ath_rc_priv->rssi_last; | 
|  | ath_rc_priv->rssi_last = tx_info_priv->tx.ts_rssi; | 
|  | ath_rc_priv->rssi_time = now_msec; | 
|  |  | 
|  | /* | 
|  | * If we got at most one retry then increase the max rate if | 
|  | * this was a probe.  Otherwise, ignore the probe. | 
|  | */ | 
|  | if (ath_rc_priv->probe_rate && ath_rc_priv->probe_rate == tx_rate) { | 
|  | if (retries > 0 || 2 * tx_info_priv->n_bad_frames > | 
|  | tx_info_priv->n_frames) { | 
|  | /* | 
|  | * Since we probed with just a single attempt, | 
|  | * any retries means the probe failed.  Also, | 
|  | * if the attempt worked, but more than half | 
|  | * the subframes were bad then also consider | 
|  | * the probe a failure. | 
|  | */ | 
|  | ath_rc_priv->probe_rate = 0; | 
|  | } else { | 
|  | u8 probe_rate = 0; | 
|  |  | 
|  | ath_rc_priv->rate_max_phy = | 
|  | ath_rc_priv->probe_rate; | 
|  | probe_rate = ath_rc_priv->probe_rate; | 
|  |  | 
|  | if (ath_rc_priv->state[probe_rate].per > 30) | 
|  | ath_rc_priv->state[probe_rate].per = 20; | 
|  |  | 
|  | ath_rc_priv->probe_rate = 0; | 
|  |  | 
|  | /* | 
|  | * Since this probe succeeded, we allow the next | 
|  | * probe twice as soon.  This allows the maxRate | 
|  | * to move up faster if the probes are | 
|  | * succesful. | 
|  | */ | 
|  | ath_rc_priv->probe_time = | 
|  | now_msec - rate_table->probe_interval / 2; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (retries > 0) { | 
|  | /* | 
|  | * Don't update anything.  We don't know if | 
|  | * this was because of collisions or poor signal. | 
|  | * | 
|  | * Later: if rssi_ack is close to | 
|  | * ath_rc_priv->state[txRate].rssi_thres and we see lots | 
|  | * of retries, then we could increase | 
|  | * ath_rc_priv->state[txRate].rssi_thres. | 
|  | */ | 
|  | ath_rc_priv->hw_maxretry_pktcnt = 0; | 
|  | } else { | 
|  | int32_t rssi_ackAvg; | 
|  | int8_t rssi_thres; | 
|  | int8_t rssi_ack_vmin; | 
|  |  | 
|  | /* | 
|  | * It worked with no retries. First ignore bogus (small) | 
|  | * rssi_ack values. | 
|  | */ | 
|  | if (tx_rate == ath_rc_priv->rate_max_phy && | 
|  | ath_rc_priv->hw_maxretry_pktcnt < 255) { | 
|  | ath_rc_priv->hw_maxretry_pktcnt++; | 
|  | } | 
|  |  | 
|  | if (tx_info_priv->tx.ts_rssi < | 
|  | rate_table->info[tx_rate].rssi_ack_validmin) | 
|  | goto exit; | 
|  |  | 
|  | /* Average the rssi */ | 
|  | if (tx_rate != ath_rc_priv->rssi_sum_rate) { | 
|  | ath_rc_priv->rssi_sum_rate = tx_rate; | 
|  | ath_rc_priv->rssi_sum = | 
|  | ath_rc_priv->rssi_sum_cnt = 0; | 
|  | } | 
|  |  | 
|  | ath_rc_priv->rssi_sum += tx_info_priv->tx.ts_rssi; | 
|  | ath_rc_priv->rssi_sum_cnt++; | 
|  |  | 
|  | if (ath_rc_priv->rssi_sum_cnt < 4) | 
|  | goto exit; | 
|  |  | 
|  | rssi_ackAvg = | 
|  | (ath_rc_priv->rssi_sum + 2) / 4; | 
|  | rssi_thres = | 
|  | ath_rc_priv->state[tx_rate].rssi_thres; | 
|  | rssi_ack_vmin = | 
|  | rate_table->info[tx_rate].rssi_ack_validmin; | 
|  |  | 
|  | ath_rc_priv->rssi_sum = | 
|  | ath_rc_priv->rssi_sum_cnt = 0; | 
|  |  | 
|  | /* Now reduce the current rssi threshold */ | 
|  | if ((rssi_ackAvg < rssi_thres + 2) && | 
|  | (rssi_thres > rssi_ack_vmin)) { | 
|  | ath_rc_priv->state[tx_rate].rssi_thres--; | 
|  | } | 
|  |  | 
|  | state_change = true; | 
|  | } | 
|  | } | 
|  | exit: | 
|  | return state_change; | 
|  | } | 
|  |  | 
|  | /* Update PER, RSSI and whatever else that the code thinks it is doing. | 
|  | If you can make sense of all this, you really need to go out more. */ | 
|  |  | 
|  | static void ath_rc_update_ht(struct ath_softc *sc, | 
|  | struct ath_rate_priv *ath_rc_priv, | 
|  | struct ath_tx_info_priv *tx_info_priv, | 
|  | int tx_rate, int xretries, int retries) | 
|  | { | 
|  | #define CHK_RSSI(rate)					\ | 
|  | ((ath_rc_priv->state[(rate)].rssi_thres +	\ | 
|  | rate_table->info[(rate)].rssi_ack_deltamin) > \ | 
|  | ath_rc_priv->state[(rate)+1].rssi_thres) | 
|  |  | 
|  | u32 now_msec = jiffies_to_msecs(jiffies); | 
|  | int rate; | 
|  | u8 last_per; | 
|  | bool state_change = false; | 
|  | struct ath_rate_table *rate_table = sc->cur_rate_table; | 
|  | int size = ath_rc_priv->rate_table_size; | 
|  |  | 
|  | if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt)) | 
|  | return; | 
|  |  | 
|  | /* To compensate for some imbalance between ctrl and ext. channel */ | 
|  |  | 
|  | if (WLAN_RC_PHY_40(rate_table->info[tx_rate].phy)) | 
|  | tx_info_priv->tx.ts_rssi = | 
|  | tx_info_priv->tx.ts_rssi < 3 ? 0 : | 
|  | tx_info_priv->tx.ts_rssi - 3; | 
|  |  | 
|  | last_per = ath_rc_priv->state[tx_rate].per; | 
|  |  | 
|  | /* Update PER first */ | 
|  | state_change = ath_rc_update_per(sc, rate_table, ath_rc_priv, | 
|  | tx_info_priv, tx_rate, xretries, | 
|  | retries, now_msec); | 
|  |  | 
|  | /* | 
|  | * If this rate looks bad (high PER) then stop using it for | 
|  | * a while (except if we are probing). | 
|  | */ | 
|  | if (ath_rc_priv->state[tx_rate].per >= 55 && tx_rate > 0 && | 
|  | rate_table->info[tx_rate].ratekbps <= | 
|  | rate_table->info[ath_rc_priv->rate_max_phy].ratekbps) { | 
|  | ath_rc_get_nextlowervalid_txrate(rate_table, ath_rc_priv, | 
|  | (u8)tx_rate, &ath_rc_priv->rate_max_phy); | 
|  |  | 
|  | /* Don't probe for a little while. */ | 
|  | ath_rc_priv->probe_time = now_msec; | 
|  | } | 
|  |  | 
|  | if (state_change) { | 
|  | /* | 
|  | * Make sure the rates above this have higher rssi thresholds. | 
|  | * (Note:  Monotonicity is kept within the OFDM rates and | 
|  | *         within the CCK rates. However, no adjustment is | 
|  | *         made to keep the rssi thresholds monotonically | 
|  | *         increasing between the CCK and OFDM rates.) | 
|  | */ | 
|  | for (rate = tx_rate; rate < size - 1; rate++) { | 
|  | if (rate_table->info[rate+1].phy != | 
|  | rate_table->info[tx_rate].phy) | 
|  | break; | 
|  |  | 
|  | if (CHK_RSSI(rate)) { | 
|  | ath_rc_priv->state[rate+1].rssi_thres = | 
|  | ath_rc_priv->state[rate].rssi_thres + | 
|  | rate_table->info[rate].rssi_ack_deltamin; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Make sure the rates below this have lower rssi thresholds. */ | 
|  | for (rate = tx_rate - 1; rate >= 0; rate--) { | 
|  | if (rate_table->info[rate].phy != | 
|  | rate_table->info[tx_rate].phy) | 
|  | break; | 
|  |  | 
|  | if (CHK_RSSI(rate)) { | 
|  | if (ath_rc_priv->state[rate+1].rssi_thres < | 
|  | rate_table->info[rate].rssi_ack_deltamin) | 
|  | ath_rc_priv->state[rate].rssi_thres = 0; | 
|  | else { | 
|  | ath_rc_priv->state[rate].rssi_thres = | 
|  | ath_rc_priv->state[rate+1].rssi_thres - | 
|  | rate_table->info[rate].rssi_ack_deltamin; | 
|  | } | 
|  |  | 
|  | if (ath_rc_priv->state[rate].rssi_thres < | 
|  | rate_table->info[rate].rssi_ack_validmin) { | 
|  | ath_rc_priv->state[rate].rssi_thres = | 
|  | rate_table->info[rate].rssi_ack_validmin; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Make sure the rates below this have lower PER */ | 
|  | /* Monotonicity is kept only for rates below the current rate. */ | 
|  | if (ath_rc_priv->state[tx_rate].per < last_per) { | 
|  | for (rate = tx_rate - 1; rate >= 0; rate--) { | 
|  | if (rate_table->info[rate].phy != | 
|  | rate_table->info[tx_rate].phy) | 
|  | break; | 
|  |  | 
|  | if (ath_rc_priv->state[rate].per > | 
|  | ath_rc_priv->state[rate+1].per) { | 
|  | ath_rc_priv->state[rate].per = | 
|  | ath_rc_priv->state[rate+1].per; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Maintain monotonicity for rates above the current rate */ | 
|  | for (rate = tx_rate; rate < size - 1; rate++) { | 
|  | if (ath_rc_priv->state[rate+1].per < | 
|  | ath_rc_priv->state[rate].per) | 
|  | ath_rc_priv->state[rate+1].per = | 
|  | ath_rc_priv->state[rate].per; | 
|  | } | 
|  |  | 
|  | /* Every so often, we reduce the thresholds and | 
|  | * PER (different for CCK and OFDM). */ | 
|  | if (now_msec - ath_rc_priv->rssi_down_time >= | 
|  | rate_table->rssi_reduce_interval) { | 
|  |  | 
|  | for (rate = 0; rate < size; rate++) { | 
|  | if (ath_rc_priv->state[rate].rssi_thres > | 
|  | rate_table->info[rate].rssi_ack_validmin) | 
|  | ath_rc_priv->state[rate].rssi_thres -= 1; | 
|  | } | 
|  | ath_rc_priv->rssi_down_time = now_msec; | 
|  | } | 
|  |  | 
|  | /* Every so often, we reduce the thresholds | 
|  | * and PER (different for CCK and OFDM). */ | 
|  | if (now_msec - ath_rc_priv->per_down_time >= | 
|  | rate_table->rssi_reduce_interval) { | 
|  | for (rate = 0; rate < size; rate++) { | 
|  | ath_rc_priv->state[rate].per = | 
|  | 7 * ath_rc_priv->state[rate].per / 8; | 
|  | } | 
|  |  | 
|  | ath_rc_priv->per_down_time = now_msec; | 
|  | } | 
|  |  | 
|  | #undef CHK_RSSI | 
|  | } | 
|  |  | 
|  | static int ath_rc_get_rateindex(struct ath_rate_table *rate_table, | 
|  | struct ieee80211_tx_rate *rate) | 
|  | { | 
|  | int rix; | 
|  |  | 
|  | if ((rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && | 
|  | (rate->flags & IEEE80211_TX_RC_SHORT_GI)) | 
|  | rix = rate_table->info[rate->idx].ht_index; | 
|  | else if (rate->flags & IEEE80211_TX_RC_SHORT_GI) | 
|  | rix = rate_table->info[rate->idx].sgi_index; | 
|  | else if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) | 
|  | rix = rate_table->info[rate->idx].cw40index; | 
|  | else | 
|  | rix = rate_table->info[rate->idx].base_index; | 
|  |  | 
|  | return rix; | 
|  | } | 
|  |  | 
|  | static void ath_rc_tx_status(struct ath_softc *sc, | 
|  | struct ath_rate_priv *ath_rc_priv, | 
|  | struct ieee80211_tx_info *tx_info, | 
|  | int final_ts_idx, int xretries, int long_retry) | 
|  | { | 
|  | struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info); | 
|  | struct ath_rate_table *rate_table; | 
|  | struct ieee80211_tx_rate *rates = tx_info->status.rates; | 
|  | u8 flags; | 
|  | u32 i = 0, rix; | 
|  |  | 
|  | rate_table = sc->cur_rate_table; | 
|  |  | 
|  | /* | 
|  | * If the first rate is not the final index, there | 
|  | * are intermediate rate failures to be processed. | 
|  | */ | 
|  | if (final_ts_idx != 0) { | 
|  | /* Process intermediate rates that failed.*/ | 
|  | for (i = 0; i < final_ts_idx ; i++) { | 
|  | if (rates[i].count != 0 && (rates[i].idx >= 0)) { | 
|  | flags = rates[i].flags; | 
|  |  | 
|  | /* If HT40 and we have switched mode from | 
|  | * 40 to 20 => don't update */ | 
|  |  | 
|  | if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && | 
|  | (ath_rc_priv->rc_phy_mode != WLAN_RC_40_FLAG)) | 
|  | return; | 
|  |  | 
|  | rix = ath_rc_get_rateindex(rate_table, &rates[i]); | 
|  | ath_rc_update_ht(sc, ath_rc_priv, | 
|  | tx_info_priv, rix, | 
|  | xretries ? 1 : 2, | 
|  | rates[i].count); | 
|  | } | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * Handle the special case of MIMO PS burst, where the second | 
|  | * aggregate is sent out with only one rate and one try. | 
|  | * Treating it as an excessive retry penalizes the rate | 
|  | * inordinately. | 
|  | */ | 
|  | if (rates[0].count == 1 && xretries == 1) | 
|  | xretries = 2; | 
|  | } | 
|  |  | 
|  | flags = rates[i].flags; | 
|  |  | 
|  | /* If HT40 and we have switched mode from 40 to 20 => don't update */ | 
|  | if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && | 
|  | (ath_rc_priv->rc_phy_mode != WLAN_RC_40_FLAG)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | rix = ath_rc_get_rateindex(rate_table, &rates[i]); | 
|  | ath_rc_update_ht(sc, ath_rc_priv, tx_info_priv, rix, | 
|  | xretries, long_retry); | 
|  | } | 
|  |  | 
|  | static struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc, | 
|  | enum ieee80211_band band, | 
|  | bool is_ht, bool is_cw_40) | 
|  | { | 
|  | int mode = 0; | 
|  |  | 
|  | switch(band) { | 
|  | case IEEE80211_BAND_2GHZ: | 
|  | mode = ATH9K_MODE_11G; | 
|  | if (is_ht) | 
|  | mode = ATH9K_MODE_11NG_HT20; | 
|  | if (is_cw_40) | 
|  | mode = ATH9K_MODE_11NG_HT40PLUS; | 
|  | break; | 
|  | case IEEE80211_BAND_5GHZ: | 
|  | mode = ATH9K_MODE_11A; | 
|  | if (is_ht) | 
|  | mode = ATH9K_MODE_11NA_HT20; | 
|  | if (is_cw_40) | 
|  | mode = ATH9K_MODE_11NA_HT40PLUS; | 
|  | break; | 
|  | default: | 
|  | DPRINTF(sc, ATH_DBG_CONFIG, "Invalid band\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | BUG_ON(mode >= ATH9K_MODE_MAX); | 
|  |  | 
|  | DPRINTF(sc, ATH_DBG_CONFIG, "Choosing rate table for mode: %d\n", mode); | 
|  | return sc->hw_rate_table[mode]; | 
|  | } | 
|  |  | 
|  | static void ath_rc_init(struct ath_softc *sc, | 
|  | struct ath_rate_priv *ath_rc_priv, | 
|  | struct ieee80211_supported_band *sband, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath_rate_table *rate_table = NULL; | 
|  | struct ath_rateset *rateset = &ath_rc_priv->neg_rates; | 
|  | u8 *ht_mcs = (u8 *)&ath_rc_priv->neg_ht_rates; | 
|  | u8 i, j, k, hi = 0, hthi = 0; | 
|  |  | 
|  | /* FIXME: Adhoc */ | 
|  | if ((sc->sc_ah->ah_opmode == NL80211_IFTYPE_STATION) || | 
|  | (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC)) { | 
|  | bool is_cw_40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  | rate_table = ath_choose_rate_table(sc, sband->band, | 
|  | sta->ht_cap.ht_supported, | 
|  | is_cw_40); | 
|  | } else if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) { | 
|  | /* cur_rate_table would be set on init through config() */ | 
|  | rate_table = sc->cur_rate_table; | 
|  | } | 
|  |  | 
|  | if (!rate_table) { | 
|  | DPRINTF(sc, ATH_DBG_FATAL, "Rate table not initialized\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (sta->ht_cap.ht_supported) { | 
|  | ath_rc_priv->ht_cap = WLAN_RC_HT_FLAG; | 
|  | if (sc->sc_tx_chainmask != 1) | 
|  | ath_rc_priv->ht_cap |= WLAN_RC_DS_FLAG; | 
|  | if (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) | 
|  | ath_rc_priv->ht_cap |= WLAN_RC_40_FLAG; | 
|  | if (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) | 
|  | ath_rc_priv->ht_cap |= WLAN_RC_SGI_FLAG; | 
|  | } | 
|  |  | 
|  | /* Initial rate table size. Will change depending | 
|  | * on the working rate set */ | 
|  | ath_rc_priv->rate_table_size = RATE_TABLE_SIZE; | 
|  |  | 
|  | /* Initialize thresholds according to the global rate table */ | 
|  | for (i = 0 ; i < ath_rc_priv->rate_table_size; i++) { | 
|  | ath_rc_priv->state[i].rssi_thres = | 
|  | rate_table->info[i].rssi_ack_validmin; | 
|  | ath_rc_priv->state[i].per = 0; | 
|  | } | 
|  |  | 
|  | /* Determine the valid rates */ | 
|  | ath_rc_init_valid_txmask(ath_rc_priv); | 
|  |  | 
|  | for (i = 0; i < WLAN_RC_PHY_MAX; i++) { | 
|  | for (j = 0; j < MAX_TX_RATE_PHY; j++) | 
|  | ath_rc_priv->valid_phy_rateidx[i][j] = 0; | 
|  | ath_rc_priv->valid_phy_ratecnt[i] = 0; | 
|  | } | 
|  | ath_rc_priv->rc_phy_mode = (ath_rc_priv->ht_cap & WLAN_RC_40_FLAG); | 
|  |  | 
|  | /* Set stream capability */ | 
|  | ath_rc_priv->single_stream = (ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ? 0 : 1; | 
|  |  | 
|  | if (!rateset->rs_nrates) { | 
|  | /* No working rate, just initialize valid rates */ | 
|  | hi = ath_rc_init_validrates(ath_rc_priv, rate_table, | 
|  | ath_rc_priv->ht_cap); | 
|  | } else { | 
|  | /* Use intersection of working rates and valid rates */ | 
|  | hi = ath_rc_setvalid_rates(ath_rc_priv, rate_table, | 
|  | rateset, ath_rc_priv->ht_cap); | 
|  | if (ath_rc_priv->ht_cap & WLAN_RC_HT_FLAG) { | 
|  | hthi = ath_rc_setvalid_htrates(ath_rc_priv, | 
|  | rate_table, | 
|  | ht_mcs, | 
|  | ath_rc_priv->ht_cap); | 
|  | } | 
|  | hi = A_MAX(hi, hthi); | 
|  | } | 
|  |  | 
|  | ath_rc_priv->rate_table_size = hi + 1; | 
|  | ath_rc_priv->rate_max_phy = 0; | 
|  | ASSERT(ath_rc_priv->rate_table_size <= RATE_TABLE_SIZE); | 
|  |  | 
|  | for (i = 0, k = 0; i < WLAN_RC_PHY_MAX; i++) { | 
|  | for (j = 0; j < ath_rc_priv->valid_phy_ratecnt[i]; j++) { | 
|  | ath_rc_priv->valid_rate_index[k++] = | 
|  | ath_rc_priv->valid_phy_rateidx[i][j]; | 
|  | } | 
|  |  | 
|  | if (!ath_rc_valid_phyrate(i, rate_table->initial_ratemax, 1) | 
|  | || !ath_rc_priv->valid_phy_ratecnt[i]) | 
|  | continue; | 
|  |  | 
|  | ath_rc_priv->rate_max_phy = ath_rc_priv->valid_phy_rateidx[i][j-1]; | 
|  | } | 
|  | ASSERT(ath_rc_priv->rate_table_size <= RATE_TABLE_SIZE); | 
|  | ASSERT(k <= RATE_TABLE_SIZE); | 
|  |  | 
|  | ath_rc_priv->max_valid_rate = k; | 
|  | ath_rc_sort_validrates(rate_table, ath_rc_priv); | 
|  | ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4]; | 
|  | sc->cur_rate_table = rate_table; | 
|  | } | 
|  |  | 
|  | /* Rate Control callbacks */ | 
|  | static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, | 
|  | struct ieee80211_sta *sta, void *priv_sta, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ath_softc *sc = priv; | 
|  | struct ath_rate_priv *ath_rc_priv = priv_sta; | 
|  | struct ath_tx_info_priv *tx_info_priv = NULL; | 
|  | struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_hdr *hdr; | 
|  | int final_ts_idx, tx_status = 0, is_underrun = 0; | 
|  | __le16 fc; | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *)skb->data; | 
|  | fc = hdr->frame_control; | 
|  | tx_info_priv = ATH_TX_INFO_PRIV(tx_info); | 
|  | final_ts_idx = tx_info_priv->tx.ts_rateindex; | 
|  |  | 
|  | if (!priv_sta || !ieee80211_is_data(fc) || | 
|  | !tx_info_priv->update_rc) | 
|  | goto exit; | 
|  |  | 
|  | if (tx_info_priv->tx.ts_status & ATH9K_TXERR_FILT) | 
|  | goto exit; | 
|  |  | 
|  | /* | 
|  | * If underrun error is seen assume it as an excessive retry only | 
|  | * if prefetch trigger level have reached the max (0x3f for 5416) | 
|  | * Adjust the long retry as if the frame was tried ATH_11N_TXMAXTRY | 
|  | * times. This affects how ratectrl updates PER for the failed rate. | 
|  | */ | 
|  | if (tx_info_priv->tx.ts_flags & | 
|  | (ATH9K_TX_DATA_UNDERRUN | ATH9K_TX_DELIM_UNDERRUN) && | 
|  | ((sc->sc_ah->ah_txTrigLevel) >= ath_rc_priv->tx_triglevel_max)) { | 
|  | tx_status = 1; | 
|  | is_underrun = 1; | 
|  | } | 
|  |  | 
|  | if ((tx_info_priv->tx.ts_status & ATH9K_TXERR_XRETRY) || | 
|  | (tx_info_priv->tx.ts_status & ATH9K_TXERR_FIFO)) | 
|  | tx_status = 1; | 
|  |  | 
|  | ath_rc_tx_status(sc, ath_rc_priv, tx_info, final_ts_idx, tx_status, | 
|  | (is_underrun) ? ATH_11N_TXMAXTRY : | 
|  | tx_info_priv->tx.ts_longretry); | 
|  |  | 
|  | exit: | 
|  | kfree(tx_info_priv); | 
|  | } | 
|  |  | 
|  | static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, | 
|  | struct ieee80211_tx_rate_control *txrc) | 
|  | { | 
|  | struct ieee80211_supported_band *sband = txrc->sband; | 
|  | struct sk_buff *skb = txrc->skb; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
|  | struct ath_softc *sc = priv; | 
|  | struct ieee80211_hw *hw = sc->hw; | 
|  | struct ath_rate_priv *ath_rc_priv = priv_sta; | 
|  | struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); | 
|  | int is_probe = 0; | 
|  | __le16 fc = hdr->frame_control; | 
|  |  | 
|  | /* lowest rate for management and multicast/broadcast frames */ | 
|  | if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || | 
|  | !sta) { | 
|  | tx_info->control.rates[0].idx = rate_lowest_index(sband, sta); | 
|  | tx_info->control.rates[0].count = | 
|  | is_multicast_ether_addr(hdr->addr1) ? 1 : ATH_MGT_TXMAXTRY; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Find tx rate for unicast frames */ | 
|  | ath_rc_ratefind(sc, ath_rc_priv, ATH_11N_TXMAXTRY, 4, | 
|  | tx_info, &is_probe, false); | 
|  |  | 
|  | /* Check if aggregation has to be enabled for this tid */ | 
|  | if (conf_is_ht(&hw->conf)) { | 
|  | if (ieee80211_is_data_qos(fc)) { | 
|  | u8 *qc, tid; | 
|  | struct ath_node *an; | 
|  |  | 
|  | qc = ieee80211_get_qos_ctl(hdr); | 
|  | tid = qc[0] & 0xf; | 
|  | an = (struct ath_node *)sta->drv_priv; | 
|  |  | 
|  | if(ath_tx_aggr_check(sc, an, tid)) | 
|  | ieee80211_start_tx_ba_session(hw, hdr->addr1, tid); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband, | 
|  | struct ieee80211_sta *sta, void *priv_sta) | 
|  | { | 
|  | struct ath_softc *sc = priv; | 
|  | struct ath_rate_priv *ath_rc_priv = priv_sta; | 
|  | int i, j = 0; | 
|  |  | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | if (sta->supp_rates[sband->band] & BIT(i)) { | 
|  | ath_rc_priv->neg_rates.rs_rates[j] | 
|  | = (sband->bitrates[i].bitrate * 2) / 10; | 
|  | j++; | 
|  | } | 
|  | } | 
|  | ath_rc_priv->neg_rates.rs_nrates = j; | 
|  |  | 
|  | if (sta->ht_cap.ht_supported) { | 
|  | for (i = 0, j = 0; i < 77; i++) { | 
|  | if (sta->ht_cap.mcs.rx_mask[i/8] & (1<<(i%8))) | 
|  | ath_rc_priv->neg_ht_rates.rs_rates[j++] = i; | 
|  | if (j == ATH_RATE_MAX) | 
|  | break; | 
|  | } | 
|  | ath_rc_priv->neg_ht_rates.rs_nrates = j; | 
|  | } | 
|  |  | 
|  | ath_rc_init(sc, priv_sta, sband, sta); | 
|  | } | 
|  |  | 
|  | static void *ath_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) | 
|  | { | 
|  | return hw->priv; | 
|  | } | 
|  |  | 
|  | static void ath_rate_free(void *priv) | 
|  | { | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp) | 
|  | { | 
|  | struct ath_softc *sc = priv; | 
|  | struct ath_rate_priv *rate_priv; | 
|  |  | 
|  | rate_priv = kzalloc(sizeof(struct ath_rate_priv), gfp); | 
|  | if (!rate_priv) { | 
|  | DPRINTF(sc, ATH_DBG_FATAL, | 
|  | "Unable to allocate private rc structure\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | rate_priv->rssi_down_time = jiffies_to_msecs(jiffies); | 
|  | rate_priv->tx_triglevel_max = sc->sc_ah->ah_caps.tx_triglevel_max; | 
|  |  | 
|  | return rate_priv; | 
|  | } | 
|  |  | 
|  | static void ath_rate_free_sta(void *priv, struct ieee80211_sta *sta, | 
|  | void *priv_sta) | 
|  | { | 
|  | struct ath_rate_priv *rate_priv = priv_sta; | 
|  | kfree(rate_priv); | 
|  | } | 
|  |  | 
|  | static struct rate_control_ops ath_rate_ops = { | 
|  | .module = NULL, | 
|  | .name = "ath9k_rate_control", | 
|  | .tx_status = ath_tx_status, | 
|  | .get_rate = ath_get_rate, | 
|  | .rate_init = ath_rate_init, | 
|  | .alloc = ath_rate_alloc, | 
|  | .free = ath_rate_free, | 
|  | .alloc_sta = ath_rate_alloc_sta, | 
|  | .free_sta = ath_rate_free_sta, | 
|  | }; | 
|  |  | 
|  | static void ath_setup_rate_table(struct ath_softc *sc, | 
|  | struct ath_rate_table *rate_table) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < rate_table->rate_cnt; i++) { | 
|  | u8 cix = rate_table->info[i].ctrl_rate; | 
|  |  | 
|  | rate_table->info[i].lpAckDuration = | 
|  | ath9k_hw_computetxtime(sc->sc_ah, rate_table, | 
|  | WLAN_CTRL_FRAME_SIZE, | 
|  | cix, | 
|  | false); | 
|  | rate_table->info[i].spAckDuration = | 
|  | ath9k_hw_computetxtime(sc->sc_ah, rate_table, | 
|  | WLAN_CTRL_FRAME_SIZE, | 
|  | cix, | 
|  | true); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ath_rate_attach(struct ath_softc *sc) | 
|  | { | 
|  | sc->hw_rate_table[ATH9K_MODE_11B] = | 
|  | &ar5416_11b_ratetable; | 
|  | sc->hw_rate_table[ATH9K_MODE_11A] = | 
|  | &ar5416_11a_ratetable; | 
|  | sc->hw_rate_table[ATH9K_MODE_11G] = | 
|  | &ar5416_11g_ratetable; | 
|  | sc->hw_rate_table[ATH9K_MODE_11NA_HT20] = | 
|  | &ar5416_11na_ratetable; | 
|  | sc->hw_rate_table[ATH9K_MODE_11NG_HT20] = | 
|  | &ar5416_11ng_ratetable; | 
|  | sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS] = | 
|  | &ar5416_11na_ratetable; | 
|  | sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS] = | 
|  | &ar5416_11na_ratetable; | 
|  | sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS] = | 
|  | &ar5416_11ng_ratetable; | 
|  | sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS] = | 
|  | &ar5416_11ng_ratetable; | 
|  |  | 
|  | ath_setup_rate_table(sc, &ar5416_11b_ratetable); | 
|  | ath_setup_rate_table(sc, &ar5416_11a_ratetable); | 
|  | ath_setup_rate_table(sc, &ar5416_11g_ratetable); | 
|  | ath_setup_rate_table(sc, &ar5416_11na_ratetable); | 
|  | ath_setup_rate_table(sc, &ar5416_11ng_ratetable); | 
|  | } | 
|  |  | 
|  | int ath_rate_control_register(void) | 
|  | { | 
|  | return ieee80211_rate_control_register(&ath_rate_ops); | 
|  | } | 
|  |  | 
|  | void ath_rate_control_unregister(void) | 
|  | { | 
|  | ieee80211_rate_control_unregister(&ath_rate_ops); | 
|  | } |