|  | #include <linux/pci.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/dmi.h> | 
|  | #include <asm/numa.h> | 
|  | #include "pci.h" | 
|  |  | 
|  | struct pci_root_info { | 
|  | char *name; | 
|  | unsigned int res_num; | 
|  | struct resource *res; | 
|  | struct pci_bus *bus; | 
|  | int busnum; | 
|  | }; | 
|  |  | 
|  | static acpi_status | 
|  | resource_to_addr(struct acpi_resource *resource, | 
|  | struct acpi_resource_address64 *addr) | 
|  | { | 
|  | acpi_status status; | 
|  |  | 
|  | status = acpi_resource_to_address64(resource, addr); | 
|  | if (ACPI_SUCCESS(status) && | 
|  | (addr->resource_type == ACPI_MEMORY_RANGE || | 
|  | addr->resource_type == ACPI_IO_RANGE) && | 
|  | addr->address_length > 0 && | 
|  | addr->producer_consumer == ACPI_PRODUCER) { | 
|  | return AE_OK; | 
|  | } | 
|  | return AE_ERROR; | 
|  | } | 
|  |  | 
|  | static acpi_status | 
|  | count_resource(struct acpi_resource *acpi_res, void *data) | 
|  | { | 
|  | struct pci_root_info *info = data; | 
|  | struct acpi_resource_address64 addr; | 
|  | acpi_status status; | 
|  |  | 
|  | if (info->res_num >= PCI_BUS_NUM_RESOURCES) | 
|  | return AE_OK; | 
|  |  | 
|  | status = resource_to_addr(acpi_res, &addr); | 
|  | if (ACPI_SUCCESS(status)) | 
|  | info->res_num++; | 
|  | return AE_OK; | 
|  | } | 
|  |  | 
|  | static acpi_status | 
|  | setup_resource(struct acpi_resource *acpi_res, void *data) | 
|  | { | 
|  | struct pci_root_info *info = data; | 
|  | struct resource *res; | 
|  | struct acpi_resource_address64 addr; | 
|  | acpi_status status; | 
|  | unsigned long flags; | 
|  | struct resource *root; | 
|  |  | 
|  | if (info->res_num >= PCI_BUS_NUM_RESOURCES) | 
|  | return AE_OK; | 
|  |  | 
|  | status = resource_to_addr(acpi_res, &addr); | 
|  | if (!ACPI_SUCCESS(status)) | 
|  | return AE_OK; | 
|  |  | 
|  | if (addr.resource_type == ACPI_MEMORY_RANGE) { | 
|  | root = &iomem_resource; | 
|  | flags = IORESOURCE_MEM; | 
|  | if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY) | 
|  | flags |= IORESOURCE_PREFETCH; | 
|  | } else if (addr.resource_type == ACPI_IO_RANGE) { | 
|  | root = &ioport_resource; | 
|  | flags = IORESOURCE_IO; | 
|  | } else | 
|  | return AE_OK; | 
|  |  | 
|  | res = &info->res[info->res_num]; | 
|  | res->name = info->name; | 
|  | res->flags = flags; | 
|  | res->start = addr.minimum + addr.translation_offset; | 
|  | res->end = res->start + addr.address_length - 1; | 
|  | res->child = NULL; | 
|  |  | 
|  | if (insert_resource(root, res)) { | 
|  | printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx " | 
|  | "from %s for %s\n", (unsigned long) res->start, | 
|  | (unsigned long) res->end, root->name, info->name); | 
|  | } else { | 
|  | info->bus->resource[info->res_num] = res; | 
|  | info->res_num++; | 
|  | } | 
|  | return AE_OK; | 
|  | } | 
|  |  | 
|  | static void | 
|  | adjust_transparent_bridge_resources(struct pci_bus *bus) | 
|  | { | 
|  | struct pci_dev *dev; | 
|  |  | 
|  | list_for_each_entry(dev, &bus->devices, bus_list) { | 
|  | int i; | 
|  | u16 class = dev->class >> 8; | 
|  |  | 
|  | if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) { | 
|  | for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++) | 
|  | dev->subordinate->resource[i] = | 
|  | dev->bus->resource[i - 3]; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | get_current_resources(struct acpi_device *device, int busnum, | 
|  | int domain, struct pci_bus *bus) | 
|  | { | 
|  | struct pci_root_info info; | 
|  | size_t size; | 
|  |  | 
|  | info.bus = bus; | 
|  | info.res_num = 0; | 
|  | acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource, | 
|  | &info); | 
|  | if (!info.res_num) | 
|  | return; | 
|  |  | 
|  | size = sizeof(*info.res) * info.res_num; | 
|  | info.res = kmalloc(size, GFP_KERNEL); | 
|  | if (!info.res) | 
|  | goto res_alloc_fail; | 
|  |  | 
|  | info.name = kmalloc(16, GFP_KERNEL); | 
|  | if (!info.name) | 
|  | goto name_alloc_fail; | 
|  | sprintf(info.name, "PCI Bus %04x:%02x", domain, busnum); | 
|  |  | 
|  | info.res_num = 0; | 
|  | acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource, | 
|  | &info); | 
|  | if (info.res_num) | 
|  | adjust_transparent_bridge_resources(bus); | 
|  |  | 
|  | return; | 
|  |  | 
|  | name_alloc_fail: | 
|  | kfree(info.res); | 
|  | res_alloc_fail: | 
|  | return; | 
|  | } | 
|  |  | 
|  | struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum) | 
|  | { | 
|  | struct pci_bus *bus; | 
|  | struct pci_sysdata *sd; | 
|  | int node; | 
|  | #ifdef CONFIG_ACPI_NUMA | 
|  | int pxm; | 
|  | #endif | 
|  |  | 
|  | if (domain && !pci_domains_supported) { | 
|  | printk(KERN_WARNING "PCI: Multiple domains not supported " | 
|  | "(dom %d, bus %d)\n", domain, busnum); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | node = -1; | 
|  | #ifdef CONFIG_ACPI_NUMA | 
|  | pxm = acpi_get_pxm(device->handle); | 
|  | if (pxm >= 0) | 
|  | node = pxm_to_node(pxm); | 
|  | if (node != -1) | 
|  | set_mp_bus_to_node(busnum, node); | 
|  | else | 
|  | #endif | 
|  | node = get_mp_bus_to_node(busnum); | 
|  |  | 
|  | if (node != -1 && !node_online(node)) | 
|  | node = -1; | 
|  |  | 
|  | /* Allocate per-root-bus (not per bus) arch-specific data. | 
|  | * TODO: leak; this memory is never freed. | 
|  | * It's arguable whether it's worth the trouble to care. | 
|  | */ | 
|  | sd = kzalloc(sizeof(*sd), GFP_KERNEL); | 
|  | if (!sd) { | 
|  | printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | sd->domain = domain; | 
|  | sd->node = node; | 
|  | /* | 
|  | * Maybe the desired pci bus has been already scanned. In such case | 
|  | * it is unnecessary to scan the pci bus with the given domain,busnum. | 
|  | */ | 
|  | bus = pci_find_bus(domain, busnum); | 
|  | if (bus) { | 
|  | /* | 
|  | * If the desired bus exits, the content of bus->sysdata will | 
|  | * be replaced by sd. | 
|  | */ | 
|  | memcpy(bus->sysdata, sd, sizeof(*sd)); | 
|  | kfree(sd); | 
|  | } else | 
|  | bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); | 
|  |  | 
|  | if (!bus) | 
|  | kfree(sd); | 
|  |  | 
|  | if (bus && node != -1) { | 
|  | #ifdef CONFIG_ACPI_NUMA | 
|  | if (pxm >= 0) | 
|  | printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n", | 
|  | busnum, pxm, node); | 
|  | #else | 
|  | printk(KERN_DEBUG "bus %02x -> node %d\n", | 
|  | busnum, node); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | if (bus && (pci_probe & PCI_USE__CRS)) | 
|  | get_current_resources(device, busnum, domain, bus); | 
|  | return bus; | 
|  | } | 
|  |  | 
|  | int __init pci_acpi_init(void) | 
|  | { | 
|  | struct pci_dev *dev = NULL; | 
|  |  | 
|  | if (pcibios_scanned) | 
|  | return 0; | 
|  |  | 
|  | if (acpi_noirq) | 
|  | return 0; | 
|  |  | 
|  | printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n"); | 
|  | acpi_irq_penalty_init(); | 
|  | pcibios_scanned++; | 
|  | pcibios_enable_irq = acpi_pci_irq_enable; | 
|  | pcibios_disable_irq = acpi_pci_irq_disable; | 
|  |  | 
|  | if (pci_routeirq) { | 
|  | /* | 
|  | * PCI IRQ routing is set up by pci_enable_device(), but we | 
|  | * also do it here in case there are still broken drivers that | 
|  | * don't use pci_enable_device(). | 
|  | */ | 
|  | printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); | 
|  | for_each_pci_dev(dev) | 
|  | acpi_pci_irq_enable(dev); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_X86_IO_APIC | 
|  | if (acpi_ioapic) | 
|  | print_IO_APIC(); | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } |