drivers/mmc/host/sdhci-esdhc-imx.c - android_kernel_htc_msm8960 - Gitiles

 /*
  * Freescale eSDHC i.MX controller driver for the platform bus.
  *
  * derived from the OF-version.
  *
  * Copyright (c) 2010 Pengutronix e.K.
  *   Author: Wolfram Sang <w.sang@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License.
  */

 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdhci-pltfm.h>
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/sdio.h>
 #include <mach/hardware.h>
 #include <mach/esdhc.h>
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"

 /* VENDOR SPEC register */
 #define SDHCI_VENDOR_SPEC		0xC0
 #define  SDHCI_VENDOR_SPEC_SDIO_QUIRK	0x00000002

 #define ESDHC_FLAG_GPIO_FOR_CD_WP	(1 << 0)
 /*
  * The CMDTYPE of the CMD register (offset 0xE) should be set to
  * "11" when the STOP CMD12 is issued on imx53 to abort one
  * open ended multi-blk IO. Otherwise the TC INT wouldn't
  * be generated.
  * In exact block transfer, the controller doesn't complete the
  * operations automatically as required at the end of the
  * transfer and remains on hold if the abort command is not sent.
  * As a result, the TC flag is not asserted and SW  received timeout
  * exeception. Bit1 of Vendor Spec registor is used to fix it.
  */
 #define ESDHC_FLAG_MULTIBLK_NO_INT	(1 << 1)

 struct pltfm_imx_data {
 	int flags;
 	u32 scratchpad;
 };

 static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
 {
 	void __iomem *base = host->ioaddr + (reg & ~0x3);
 	u32 shift = (reg & 0x3) * 8;

 	writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
 }

 static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;

 	/* fake CARD_PRESENT flag on mx25/35 */
 	u32 val = readl(host->ioaddr + reg);

 	if (unlikely((reg == SDHCI_PRESENT_STATE)
 			&& (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD_WP))) {
 		struct esdhc_platform_data *boarddata =
 				host->mmc->parent->platform_data;

 		if (boarddata && gpio_is_valid(boarddata->cd_gpio)
 				&& gpio_get_value(boarddata->cd_gpio))
 			/* no card, if a valid gpio says so... */
 			val &= SDHCI_CARD_PRESENT;
 		else
 			/* ... in all other cases assume card is present */
 			val |= SDHCI_CARD_PRESENT;
 	}

 	return val;
 }

 static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;

 	if (unlikely((reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)
 			&& (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD_WP)))
 		/*
 		 * these interrupts won't work with a custom card_detect gpio
 		 * (only applied to mx25/35)
 		 */
 		val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);

 	if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
 				&& (reg == SDHCI_INT_STATUS)
 				&& (val & SDHCI_INT_DATA_END))) {
 			u32 v;
 			v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
 			v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
 			writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
 	}

 	writel(val, host->ioaddr + reg);
 }

 static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
 {
 	if (unlikely(reg == SDHCI_HOST_VERSION))
 		reg ^= 2;

 	return readw(host->ioaddr + reg);
 }

 static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;

 	switch (reg) {
 	case SDHCI_TRANSFER_MODE:
 		/*
 		 * Postpone this write, we must do it together with a
 		 * command write that is down below.
 		 */
 		if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
 				&& (host->cmd->opcode == SD_IO_RW_EXTENDED)
 				&& (host->cmd->data->blocks > 1)
 				&& (host->cmd->data->flags & MMC_DATA_READ)) {
 			u32 v;
 			v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
 			v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
 			writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
 		}
 		imx_data->scratchpad = val;
 		return;
 	case SDHCI_COMMAND:
 		if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
 			&& (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
 			val |= SDHCI_CMD_ABORTCMD;
 		writel(val << 16 | imx_data->scratchpad,
 			host->ioaddr + SDHCI_TRANSFER_MODE);
 		return;
 	case SDHCI_BLOCK_SIZE:
 		val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
 		break;
 	}
 	esdhc_clrset_le(host, 0xffff, val, reg);
 }

 static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
 {
 	u32 new_val;

 	switch (reg) {
 	case SDHCI_POWER_CONTROL:
 		/*
 		 * FSL put some DMA bits here
 		 * If your board has a regulator, code should be here
 		 */
 		return;
 	case SDHCI_HOST_CONTROL:
 		/* FSL messed up here, so we can just keep those two */
 		new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS);
 		/* ensure the endianess */
 		new_val |= ESDHC_HOST_CONTROL_LE;
 		/* DMA mode bits are shifted */
 		new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;

 		esdhc_clrset_le(host, 0xffff, new_val, reg);
 		return;
 	}
 	esdhc_clrset_le(host, 0xff, val, reg);
 }

 static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);

 	return clk_get_rate(pltfm_host->clk);
 }

 static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);

 	return clk_get_rate(pltfm_host->clk) / 256 / 16;
 }

 static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
 {
 	struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;

 	if (boarddata && gpio_is_valid(boarddata->wp_gpio))
 		return gpio_get_value(boarddata->wp_gpio);
 	else
 		return -ENOSYS;
 }

 static struct sdhci_ops sdhci_esdhc_ops = {
 	.read_l = esdhc_readl_le,
 	.read_w = esdhc_readw_le,
 	.write_l = esdhc_writel_le,
 	.write_w = esdhc_writew_le,
 	.write_b = esdhc_writeb_le,
 	.set_clock = esdhc_set_clock,
 	.get_max_clock = esdhc_pltfm_get_max_clock,
 	.get_min_clock = esdhc_pltfm_get_min_clock,
 };

 static irqreturn_t cd_irq(int irq, void *data)
 {
 	struct sdhci_host *sdhost = (struct sdhci_host *)data;

 	tasklet_schedule(&sdhost->card_tasklet);
 	return IRQ_HANDLED;
 };

 static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pdata)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
 	struct clk *clk;
 	int err;
 	struct pltfm_imx_data *imx_data;

 	clk = clk_get(mmc_dev(host->mmc), NULL);
 	if (IS_ERR(clk)) {
 		dev_err(mmc_dev(host->mmc), "clk err\n");
 		return PTR_ERR(clk);
 	}
 	clk_enable(clk);
 	pltfm_host->clk = clk;

 	imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL);
 	if (!imx_data) {
 		clk_disable(pltfm_host->clk);
 		clk_put(pltfm_host->clk);
 		return -ENOMEM;
 	}
 	pltfm_host->priv = imx_data;

 	if (!cpu_is_mx25())
 		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;

 	if (cpu_is_mx25() || cpu_is_mx35()) {
 		/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
 		host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
 		/* write_protect can't be routed to controller, use gpio */
 		sdhci_esdhc_ops.get_ro = esdhc_pltfm_get_ro;
 	}

 	if (!(cpu_is_mx25() || cpu_is_mx35() || cpu_is_mx51()))
 		imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;

 	if (boarddata) {
 		err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
 		if (err) {
 			dev_warn(mmc_dev(host->mmc),
 				"no write-protect pin available!\n");
 			boarddata->wp_gpio = err;
 		}

 		err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD");
 		if (err) {
 			dev_warn(mmc_dev(host->mmc),
 				"no card-detect pin available!\n");
 			goto no_card_detect_pin;
 		}

 		/* i.MX5x has issues to be researched */
 		if (!cpu_is_mx25() && !cpu_is_mx35())
 			goto not_supported;

 		err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq,
 				 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 				 mmc_hostname(host->mmc), host);
 		if (err) {
 			dev_warn(mmc_dev(host->mmc), "request irq error\n");
 			goto no_card_detect_irq;
 		}

 		imx_data->flags |= ESDHC_FLAG_GPIO_FOR_CD_WP;
 		/* Now we have a working card_detect again */
 		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
 	}

 	return 0;

  no_card_detect_irq:
 	gpio_free(boarddata->cd_gpio);
  no_card_detect_pin:
 	boarddata->cd_gpio = err;
  not_supported:
 	kfree(imx_data);
 	return 0;
 }

 static void esdhc_pltfm_exit(struct sdhci_host *host)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;

 	if (boarddata && gpio_is_valid(boarddata->wp_gpio))
 		gpio_free(boarddata->wp_gpio);

 	if (boarddata && gpio_is_valid(boarddata->cd_gpio)) {
 		gpio_free(boarddata->cd_gpio);

 		if (!(host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION))
 			free_irq(gpio_to_irq(boarddata->cd_gpio), host);
 	}

 	clk_disable(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 	kfree(imx_data);
 }

 struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
 	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA
 			| SDHCI_QUIRK_BROKEN_CARD_DETECTION,
 	/* ADMA has issues. Might be fixable */
 	.ops = &sdhci_esdhc_ops,
 	.init = esdhc_pltfm_init,
 	.exit = esdhc_pltfm_exit,
 };
	/*
	* Freescale eSDHC i.MX controller driver for the platform bus.
	*
	* derived from the OF-version.
	*
	* Copyright (c) 2010 Pengutronix e.K.
	* Author: Wolfram Sang <w.sang@pengutronix.de>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License.
	*/

	#include <linux/io.h>
	#include <linux/delay.h>
	#include <linux/err.h>
	#include <linux/clk.h>
	#include <linux/gpio.h>
	#include <linux/slab.h>
	#include <linux/mmc/host.h>
	#include <linux/mmc/sdhci-pltfm.h>
	#include <linux/mmc/mmc.h>
	#include <linux/mmc/sdio.h>
	#include <mach/hardware.h>
	#include <mach/esdhc.h>
	#include "sdhci.h"
	#include "sdhci-pltfm.h"
	#include "sdhci-esdhc.h"

	/* VENDOR SPEC register */
	#define SDHCI_VENDOR_SPEC 0xC0
	#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002

	#define ESDHC_FLAG_GPIO_FOR_CD_WP (1 << 0)
	/*
	* The CMDTYPE of the CMD register (offset 0xE) should be set to
	* "11" when the STOP CMD12 is issued on imx53 to abort one
	* open ended multi-blk IO. Otherwise the TC INT wouldn't
	* be generated.
	* In exact block transfer, the controller doesn't complete the
	* operations automatically as required at the end of the
	* transfer and remains on hold if the abort command is not sent.
	* As a result, the TC flag is not asserted and SW received timeout
	* exeception. Bit1 of Vendor Spec registor is used to fix it.
	*/
	#define ESDHC_FLAG_MULTIBLK_NO_INT (1 << 1)

	struct pltfm_imx_data {
	int flags;
	u32 scratchpad;
	};

	static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
	{
	void __iomem *base = host->ioaddr + (reg & ~0x3);
	u32 shift = (reg & 0x3) * 8;

	writel(((readl(base) & ~(mask << shift)) \| (val << shift)), base);
	}

	static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
	{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct pltfm_imx_data *imx_data = pltfm_host->priv;

	/* fake CARD_PRESENT flag on mx25/35 */
	u32 val = readl(host->ioaddr + reg);

	if (unlikely((reg == SDHCI_PRESENT_STATE)
	&& (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD_WP))) {
	struct esdhc_platform_data *boarddata =
	host->mmc->parent->platform_data;

	if (boarddata && gpio_is_valid(boarddata->cd_gpio)
	&& gpio_get_value(boarddata->cd_gpio))
	/* no card, if a valid gpio says so... */
	val &= SDHCI_CARD_PRESENT;
	else
	/* ... in all other cases assume card is present */
	val \|= SDHCI_CARD_PRESENT;
	}

	return val;
	}

	static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
	{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct pltfm_imx_data *imx_data = pltfm_host->priv;

	if (unlikely((reg == SDHCI_INT_ENABLE \|\| reg == SDHCI_SIGNAL_ENABLE)
	&& (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD_WP)))
	/*
	* these interrupts won't work with a custom card_detect gpio
	* (only applied to mx25/35)
	*/
	val &= ~(SDHCI_INT_CARD_REMOVE \| SDHCI_INT_CARD_INSERT);

	if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
	&& (reg == SDHCI_INT_STATUS)
	&& (val & SDHCI_INT_DATA_END))) {
	u32 v;
	v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
	v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
	writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
	}

	writel(val, host->ioaddr + reg);
	}

	static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
	{
	if (unlikely(reg == SDHCI_HOST_VERSION))
	reg ^= 2;

	return readw(host->ioaddr + reg);
	}

	static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
	{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct pltfm_imx_data *imx_data = pltfm_host->priv;

	switch (reg) {
	case SDHCI_TRANSFER_MODE:
	/*
	* Postpone this write, we must do it together with a
	* command write that is down below.
	*/
	if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
	&& (host->cmd->opcode == SD_IO_RW_EXTENDED)
	&& (host->cmd->data->blocks > 1)
	&& (host->cmd->data->flags & MMC_DATA_READ)) {
	u32 v;
	v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
	v \|= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
	writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
	}
	imx_data->scratchpad = val;
	return;
	case SDHCI_COMMAND:
	if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
	&& (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
	val \|= SDHCI_CMD_ABORTCMD;
	writel(val << 16 \| imx_data->scratchpad,
	host->ioaddr + SDHCI_TRANSFER_MODE);
	return;
	case SDHCI_BLOCK_SIZE:
	val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
	break;
	}
	esdhc_clrset_le(host, 0xffff, val, reg);
	}

	static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
	{
	u32 new_val;

	switch (reg) {
	case SDHCI_POWER_CONTROL:
	/*
	* FSL put some DMA bits here
	* If your board has a regulator, code should be here
	*/
	return;
	case SDHCI_HOST_CONTROL:
	/* FSL messed up here, so we can just keep those two */
	new_val = val & (SDHCI_CTRL_LED \| SDHCI_CTRL_4BITBUS);
	/* ensure the endianess */
	new_val \|= ESDHC_HOST_CONTROL_LE;
	/* DMA mode bits are shifted */
	new_val \|= (val & SDHCI_CTRL_DMA_MASK) << 5;

	esdhc_clrset_le(host, 0xffff, new_val, reg);
	return;
	}
	esdhc_clrset_le(host, 0xff, val, reg);
	}

	static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
	{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);

	return clk_get_rate(pltfm_host->clk);
	}

	static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
	{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);

	return clk_get_rate(pltfm_host->clk) / 256 / 16;
	}

	static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
	{
	struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;

	if (boarddata && gpio_is_valid(boarddata->wp_gpio))
	return gpio_get_value(boarddata->wp_gpio);
	else
	return -ENOSYS;
	}

	static struct sdhci_ops sdhci_esdhc_ops = {
	.read_l = esdhc_readl_le,
	.read_w = esdhc_readw_le,
	.write_l = esdhc_writel_le,
	.write_w = esdhc_writew_le,
	.write_b = esdhc_writeb_le,
	.set_clock = esdhc_set_clock,
	.get_max_clock = esdhc_pltfm_get_max_clock,
	.get_min_clock = esdhc_pltfm_get_min_clock,
	};

	static irqreturn_t cd_irq(int irq, void *data)
	{
	struct sdhci_host sdhost = (struct sdhci_host )data;

	tasklet_schedule(&sdhost->card_tasklet);
	return IRQ_HANDLED;
	};

	static int esdhc_pltfm_init(struct sdhci_host host, struct sdhci_pltfm_data pdata)
	{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
	struct clk *clk;
	int err;
	struct pltfm_imx_data *imx_data;

	clk = clk_get(mmc_dev(host->mmc), NULL);
	if (IS_ERR(clk)) {
	dev_err(mmc_dev(host->mmc), "clk err\n");
	return PTR_ERR(clk);
	}
	clk_enable(clk);
	pltfm_host->clk = clk;

	imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL);
	if (!imx_data) {
	clk_disable(pltfm_host->clk);
	clk_put(pltfm_host->clk);
	return -ENOMEM;
	}
	pltfm_host->priv = imx_data;

	if (!cpu_is_mx25())
	host->quirks \|= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;

	if (cpu_is_mx25() \|\| cpu_is_mx35()) {
	/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
	host->quirks \|= SDHCI_QUIRK_NO_MULTIBLOCK;
	/* write_protect can't be routed to controller, use gpio */
	sdhci_esdhc_ops.get_ro = esdhc_pltfm_get_ro;
	}

	if (!(cpu_is_mx25() \|\| cpu_is_mx35() \|\| cpu_is_mx51()))
	imx_data->flags \|= ESDHC_FLAG_MULTIBLK_NO_INT;

	if (boarddata) {
	err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
	if (err) {
	dev_warn(mmc_dev(host->mmc),
	"no write-protect pin available!\n");
	boarddata->wp_gpio = err;
	}

	err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD");
	if (err) {
	dev_warn(mmc_dev(host->mmc),
	"no card-detect pin available!\n");
	goto no_card_detect_pin;
	}

	/* i.MX5x has issues to be researched */
	if (!cpu_is_mx25() && !cpu_is_mx35())
	goto not_supported;

	err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq,
	IRQF_TRIGGER_FALLING \| IRQF_TRIGGER_RISING,
	mmc_hostname(host->mmc), host);
	if (err) {
	dev_warn(mmc_dev(host->mmc), "request irq error\n");
	goto no_card_detect_irq;
	}

	imx_data->flags \|= ESDHC_FLAG_GPIO_FOR_CD_WP;
	/* Now we have a working card_detect again */
	host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
	}

	return 0;

	no_card_detect_irq:
	gpio_free(boarddata->cd_gpio);
	no_card_detect_pin:
	boarddata->cd_gpio = err;
	not_supported:
	kfree(imx_data);
	return 0;
	}

	static void esdhc_pltfm_exit(struct sdhci_host *host)
	{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
	struct pltfm_imx_data *imx_data = pltfm_host->priv;

	if (boarddata && gpio_is_valid(boarddata->wp_gpio))
	gpio_free(boarddata->wp_gpio);

	if (boarddata && gpio_is_valid(boarddata->cd_gpio)) {
	gpio_free(boarddata->cd_gpio);

	if (!(host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION))
	free_irq(gpio_to_irq(boarddata->cd_gpio), host);
	}

	clk_disable(pltfm_host->clk);
	clk_put(pltfm_host->clk);
	kfree(imx_data);
	}

	struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
	.quirks = ESDHC_DEFAULT_QUIRKS \| SDHCI_QUIRK_BROKEN_ADMA
	\| SDHCI_QUIRK_BROKEN_CARD_DETECTION,
	/* ADMA has issues. Might be fixable */
	.ops = &sdhci_esdhc_ops,
	.init = esdhc_pltfm_init,
	.exit = esdhc_pltfm_exit,
	};