|  | /* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */ | 
|  | /* | 
|  | Written 1998-2001 by Donald Becker. | 
|  |  | 
|  | Current Maintainer: Roger Luethi <rl@hellgate.ch> | 
|  |  | 
|  | This software may be used and distributed according to the terms of | 
|  | the GNU General Public License (GPL), incorporated herein by reference. | 
|  | Drivers based on or derived from this code fall under the GPL and must | 
|  | retain the authorship, copyright and license notice.  This file is not | 
|  | a complete program and may only be used when the entire operating | 
|  | system is licensed under the GPL. | 
|  |  | 
|  | This driver is designed for the VIA VT86C100A Rhine-I. | 
|  | It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM | 
|  | and management NIC 6105M). | 
|  |  | 
|  | The author may be reached as becker@scyld.com, or C/O | 
|  | Scyld Computing Corporation | 
|  | 410 Severn Ave., Suite 210 | 
|  | Annapolis MD 21403 | 
|  |  | 
|  |  | 
|  | This driver contains some changes from the original Donald Becker | 
|  | version. He may or may not be interested in bug reports on this | 
|  | code. You can find his versions at: | 
|  | http://www.scyld.com/network/via-rhine.html | 
|  | [link no longer provides useful info -jgarzik] | 
|  |  | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #define DRV_NAME	"via-rhine" | 
|  | #define DRV_VERSION	"1.5.0" | 
|  | #define DRV_RELDATE	"2010-10-09" | 
|  |  | 
|  |  | 
|  | /* A few user-configurable values. | 
|  | These may be modified when a driver module is loaded. */ | 
|  |  | 
|  | #define DEBUG | 
|  | static int debug = 1;	/* 1 normal messages, 0 quiet .. 7 verbose. */ | 
|  | static int max_interrupt_work = 20; | 
|  |  | 
|  | /* Set the copy breakpoint for the copy-only-tiny-frames scheme. | 
|  | Setting to > 1518 effectively disables this feature. */ | 
|  | #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \ | 
|  | defined(CONFIG_SPARC) || defined(__ia64__) ||		   \ | 
|  | defined(__sh__) || defined(__mips__) | 
|  | static int rx_copybreak = 1518; | 
|  | #else | 
|  | static int rx_copybreak; | 
|  | #endif | 
|  |  | 
|  | /* Work-around for broken BIOSes: they are unable to get the chip back out of | 
|  | power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */ | 
|  | static int avoid_D3; | 
|  |  | 
|  | /* | 
|  | * In case you are looking for 'options[]' or 'full_duplex[]', they | 
|  | * are gone. Use ethtool(8) instead. | 
|  | */ | 
|  |  | 
|  | /* Maximum number of multicast addresses to filter (vs. rx-all-multicast). | 
|  | The Rhine has a 64 element 8390-like hash table. */ | 
|  | static const int multicast_filter_limit = 32; | 
|  |  | 
|  |  | 
|  | /* Operational parameters that are set at compile time. */ | 
|  |  | 
|  | /* Keep the ring sizes a power of two for compile efficiency. | 
|  | The compiler will convert <unsigned>'%'<2^N> into a bit mask. | 
|  | Making the Tx ring too large decreases the effectiveness of channel | 
|  | bonding and packet priority. | 
|  | There are no ill effects from too-large receive rings. */ | 
|  | #define TX_RING_SIZE	16 | 
|  | #define TX_QUEUE_LEN	10	/* Limit ring entries actually used. */ | 
|  | #define RX_RING_SIZE	64 | 
|  |  | 
|  | /* Operational parameters that usually are not changed. */ | 
|  |  | 
|  | /* Time in jiffies before concluding the transmitter is hung. */ | 
|  | #define TX_TIMEOUT	(2*HZ) | 
|  |  | 
|  | #define PKT_BUF_SZ	1536	/* Size of each temporary Rx buffer.*/ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/mii.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/crc32.h> | 
|  | #include <linux/if_vlan.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <asm/processor.h>	/* Processor type for cache alignment. */ | 
|  | #include <asm/io.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <linux/dmi.h> | 
|  |  | 
|  | /* These identify the driver base version and may not be removed. */ | 
|  | static const char version[] __devinitconst = | 
|  | "v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker"; | 
|  |  | 
|  | /* This driver was written to use PCI memory space. Some early versions | 
|  | of the Rhine may only work correctly with I/O space accesses. */ | 
|  | #ifdef CONFIG_VIA_RHINE_MMIO | 
|  | #define USE_MMIO | 
|  | #else | 
|  | #endif | 
|  |  | 
|  | MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); | 
|  | MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | module_param(max_interrupt_work, int, 0); | 
|  | module_param(debug, int, 0); | 
|  | module_param(rx_copybreak, int, 0); | 
|  | module_param(avoid_D3, bool, 0); | 
|  | MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt"); | 
|  | MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)"); | 
|  | MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); | 
|  | MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)"); | 
|  |  | 
|  | #define MCAM_SIZE	32 | 
|  | #define VCAM_SIZE	32 | 
|  |  | 
|  | /* | 
|  | Theory of Operation | 
|  |  | 
|  | I. Board Compatibility | 
|  |  | 
|  | This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet | 
|  | controller. | 
|  |  | 
|  | II. Board-specific settings | 
|  |  | 
|  | Boards with this chip are functional only in a bus-master PCI slot. | 
|  |  | 
|  | Many operational settings are loaded from the EEPROM to the Config word at | 
|  | offset 0x78. For most of these settings, this driver assumes that they are | 
|  | correct. | 
|  | If this driver is compiled to use PCI memory space operations the EEPROM | 
|  | must be configured to enable memory ops. | 
|  |  | 
|  | III. Driver operation | 
|  |  | 
|  | IIIa. Ring buffers | 
|  |  | 
|  | This driver uses two statically allocated fixed-size descriptor lists | 
|  | formed into rings by a branch from the final descriptor to the beginning of | 
|  | the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. | 
|  |  | 
|  | IIIb/c. Transmit/Receive Structure | 
|  |  | 
|  | This driver attempts to use a zero-copy receive and transmit scheme. | 
|  |  | 
|  | Alas, all data buffers are required to start on a 32 bit boundary, so | 
|  | the driver must often copy transmit packets into bounce buffers. | 
|  |  | 
|  | The driver allocates full frame size skbuffs for the Rx ring buffers at | 
|  | open() time and passes the skb->data field to the chip as receive data | 
|  | buffers. When an incoming frame is less than RX_COPYBREAK bytes long, | 
|  | a fresh skbuff is allocated and the frame is copied to the new skbuff. | 
|  | When the incoming frame is larger, the skbuff is passed directly up the | 
|  | protocol stack. Buffers consumed this way are replaced by newly allocated | 
|  | skbuffs in the last phase of rhine_rx(). | 
|  |  | 
|  | The RX_COPYBREAK value is chosen to trade-off the memory wasted by | 
|  | using a full-sized skbuff for small frames vs. the copying costs of larger | 
|  | frames. New boards are typically used in generously configured machines | 
|  | and the underfilled buffers have negligible impact compared to the benefit of | 
|  | a single allocation size, so the default value of zero results in never | 
|  | copying packets. When copying is done, the cost is usually mitigated by using | 
|  | a combined copy/checksum routine. Copying also preloads the cache, which is | 
|  | most useful with small frames. | 
|  |  | 
|  | Since the VIA chips are only able to transfer data to buffers on 32 bit | 
|  | boundaries, the IP header at offset 14 in an ethernet frame isn't | 
|  | longword aligned for further processing. Copying these unaligned buffers | 
|  | has the beneficial effect of 16-byte aligning the IP header. | 
|  |  | 
|  | IIId. Synchronization | 
|  |  | 
|  | The driver runs as two independent, single-threaded flows of control. One | 
|  | is the send-packet routine, which enforces single-threaded use by the | 
|  | netdev_priv(dev)->lock spinlock. The other thread is the interrupt handler, | 
|  | which is single threaded by the hardware and interrupt handling software. | 
|  |  | 
|  | The send packet thread has partial control over the Tx ring. It locks the | 
|  | netdev_priv(dev)->lock whenever it's queuing a Tx packet. If the next slot in | 
|  | the ring is not available it stops the transmit queue by | 
|  | calling netif_stop_queue. | 
|  |  | 
|  | The interrupt handler has exclusive control over the Rx ring and records stats | 
|  | from the Tx ring. After reaping the stats, it marks the Tx queue entry as | 
|  | empty by incrementing the dirty_tx mark. If at least half of the entries in | 
|  | the Rx ring are available the transmit queue is woken up if it was stopped. | 
|  |  | 
|  | IV. Notes | 
|  |  | 
|  | IVb. References | 
|  |  | 
|  | Preliminary VT86C100A manual from http://www.via.com.tw/ | 
|  | http://www.scyld.com/expert/100mbps.html | 
|  | http://www.scyld.com/expert/NWay.html | 
|  | ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf | 
|  | ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF | 
|  |  | 
|  |  | 
|  | IVc. Errata | 
|  |  | 
|  | The VT86C100A manual is not reliable information. | 
|  | The 3043 chip does not handle unaligned transmit or receive buffers, resulting | 
|  | in significant performance degradation for bounce buffer copies on transmit | 
|  | and unaligned IP headers on receive. | 
|  | The chip does not pad to minimum transmit length. | 
|  |  | 
|  | */ | 
|  |  | 
|  |  | 
|  | /* This table drives the PCI probe routines. It's mostly boilerplate in all | 
|  | of the drivers, and will likely be provided by some future kernel. | 
|  | Note the matching code -- the first table entry matchs all 56** cards but | 
|  | second only the 1234 card. | 
|  | */ | 
|  |  | 
|  | enum rhine_revs { | 
|  | VT86C100A	= 0x00, | 
|  | VTunknown0	= 0x20, | 
|  | VT6102		= 0x40, | 
|  | VT8231		= 0x50,	/* Integrated MAC */ | 
|  | VT8233		= 0x60,	/* Integrated MAC */ | 
|  | VT8235		= 0x74,	/* Integrated MAC */ | 
|  | VT8237		= 0x78,	/* Integrated MAC */ | 
|  | VTunknown1	= 0x7C, | 
|  | VT6105		= 0x80, | 
|  | VT6105_B0	= 0x83, | 
|  | VT6105L		= 0x8A, | 
|  | VT6107		= 0x8C, | 
|  | VTunknown2	= 0x8E, | 
|  | VT6105M		= 0x90,	/* Management adapter */ | 
|  | }; | 
|  |  | 
|  | enum rhine_quirks { | 
|  | rqWOL		= 0x0001,	/* Wake-On-LAN support */ | 
|  | rqForceReset	= 0x0002, | 
|  | rq6patterns	= 0x0040,	/* 6 instead of 4 patterns for WOL */ | 
|  | rqStatusWBRace	= 0x0080,	/* Tx Status Writeback Error possible */ | 
|  | rqRhineI	= 0x0100,	/* See comment below */ | 
|  | }; | 
|  | /* | 
|  | * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable | 
|  | * MMIO as well as for the collision counter and the Tx FIFO underflow | 
|  | * indicator. In addition, Tx and Rx buffers need to 4 byte aligned. | 
|  | */ | 
|  |  | 
|  | /* Beware of PCI posted writes */ | 
|  | #define IOSYNC	do { ioread8(ioaddr + StationAddr); } while (0) | 
|  |  | 
|  | static DEFINE_PCI_DEVICE_TABLE(rhine_pci_tbl) = { | 
|  | { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, },	/* VT86C100A */ | 
|  | { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, },	/* VT6102 */ | 
|  | { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, },	/* 6105{,L,LOM} */ | 
|  | { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, },	/* VT6105M */ | 
|  | { }	/* terminate list */ | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, rhine_pci_tbl); | 
|  |  | 
|  |  | 
|  | /* Offsets to the device registers. */ | 
|  | enum register_offsets { | 
|  | StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08, | 
|  | ChipCmd1=0x09, TQWake=0x0A, | 
|  | IntrStatus=0x0C, IntrEnable=0x0E, | 
|  | MulticastFilter0=0x10, MulticastFilter1=0x14, | 
|  | RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54, | 
|  | MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E, PCIBusConfig1=0x6F, | 
|  | MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74, | 
|  | ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B, | 
|  | RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81, | 
|  | StickyHW=0x83, IntrStatus2=0x84, | 
|  | CamMask=0x88, CamCon=0x92, CamAddr=0x93, | 
|  | WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4, | 
|  | WOLcrClr1=0xA6, WOLcgClr=0xA7, | 
|  | PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD, | 
|  | }; | 
|  |  | 
|  | /* Bits in ConfigD */ | 
|  | enum backoff_bits { | 
|  | BackOptional=0x01, BackModify=0x02, | 
|  | BackCaptureEffect=0x04, BackRandom=0x08 | 
|  | }; | 
|  |  | 
|  | /* Bits in the TxConfig (TCR) register */ | 
|  | enum tcr_bits { | 
|  | TCR_PQEN=0x01, | 
|  | TCR_LB0=0x02,		/* loopback[0] */ | 
|  | TCR_LB1=0x04,		/* loopback[1] */ | 
|  | TCR_OFSET=0x08, | 
|  | TCR_RTGOPT=0x10, | 
|  | TCR_RTFT0=0x20, | 
|  | TCR_RTFT1=0x40, | 
|  | TCR_RTSF=0x80, | 
|  | }; | 
|  |  | 
|  | /* Bits in the CamCon (CAMC) register */ | 
|  | enum camcon_bits { | 
|  | CAMC_CAMEN=0x01, | 
|  | CAMC_VCAMSL=0x02, | 
|  | CAMC_CAMWR=0x04, | 
|  | CAMC_CAMRD=0x08, | 
|  | }; | 
|  |  | 
|  | /* Bits in the PCIBusConfig1 (BCR1) register */ | 
|  | enum bcr1_bits { | 
|  | BCR1_POT0=0x01, | 
|  | BCR1_POT1=0x02, | 
|  | BCR1_POT2=0x04, | 
|  | BCR1_CTFT0=0x08, | 
|  | BCR1_CTFT1=0x10, | 
|  | BCR1_CTSF=0x20, | 
|  | BCR1_TXQNOBK=0x40,	/* for VT6105 */ | 
|  | BCR1_VIDFR=0x80,	/* for VT6105 */ | 
|  | BCR1_MED0=0x40,		/* for VT6102 */ | 
|  | BCR1_MED1=0x80,		/* for VT6102 */ | 
|  | }; | 
|  |  | 
|  | #ifdef USE_MMIO | 
|  | /* Registers we check that mmio and reg are the same. */ | 
|  | static const int mmio_verify_registers[] = { | 
|  | RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD, | 
|  | 0 | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | /* Bits in the interrupt status/mask registers. */ | 
|  | enum intr_status_bits { | 
|  | IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020, | 
|  | IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210, | 
|  | IntrPCIErr=0x0040, | 
|  | IntrStatsMax=0x0080, IntrRxEarly=0x0100, | 
|  | IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000, | 
|  | IntrTxAborted=0x2000, IntrLinkChange=0x4000, | 
|  | IntrRxWakeUp=0x8000, | 
|  | IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260, | 
|  | IntrTxDescRace=0x080000,	/* mapped from IntrStatus2 */ | 
|  | IntrTxErrSummary=0x082218, | 
|  | }; | 
|  |  | 
|  | /* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */ | 
|  | enum wol_bits { | 
|  | WOLucast	= 0x10, | 
|  | WOLmagic	= 0x20, | 
|  | WOLbmcast	= 0x30, | 
|  | WOLlnkon	= 0x40, | 
|  | WOLlnkoff	= 0x80, | 
|  | }; | 
|  |  | 
|  | /* The Rx and Tx buffer descriptors. */ | 
|  | struct rx_desc { | 
|  | __le32 rx_status; | 
|  | __le32 desc_length; /* Chain flag, Buffer/frame length */ | 
|  | __le32 addr; | 
|  | __le32 next_desc; | 
|  | }; | 
|  | struct tx_desc { | 
|  | __le32 tx_status; | 
|  | __le32 desc_length; /* Chain flag, Tx Config, Frame length */ | 
|  | __le32 addr; | 
|  | __le32 next_desc; | 
|  | }; | 
|  |  | 
|  | /* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */ | 
|  | #define TXDESC		0x00e08000 | 
|  |  | 
|  | enum rx_status_bits { | 
|  | RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F | 
|  | }; | 
|  |  | 
|  | /* Bits in *_desc.*_status */ | 
|  | enum desc_status_bits { | 
|  | DescOwn=0x80000000 | 
|  | }; | 
|  |  | 
|  | /* Bits in *_desc.*_length */ | 
|  | enum desc_length_bits { | 
|  | DescTag=0x00010000 | 
|  | }; | 
|  |  | 
|  | /* Bits in ChipCmd. */ | 
|  | enum chip_cmd_bits { | 
|  | CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08, | 
|  | CmdTxOn=0x10, Cmd1TxDemand=0x20, CmdRxDemand=0x40, | 
|  | Cmd1EarlyRx=0x01, Cmd1EarlyTx=0x02, Cmd1FDuplex=0x04, | 
|  | Cmd1NoTxPoll=0x08, Cmd1Reset=0x80, | 
|  | }; | 
|  |  | 
|  | struct rhine_private { | 
|  | /* Bit mask for configured VLAN ids */ | 
|  | unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; | 
|  |  | 
|  | /* Descriptor rings */ | 
|  | struct rx_desc *rx_ring; | 
|  | struct tx_desc *tx_ring; | 
|  | dma_addr_t rx_ring_dma; | 
|  | dma_addr_t tx_ring_dma; | 
|  |  | 
|  | /* The addresses of receive-in-place skbuffs. */ | 
|  | struct sk_buff *rx_skbuff[RX_RING_SIZE]; | 
|  | dma_addr_t rx_skbuff_dma[RX_RING_SIZE]; | 
|  |  | 
|  | /* The saved address of a sent-in-place packet/buffer, for later free(). */ | 
|  | struct sk_buff *tx_skbuff[TX_RING_SIZE]; | 
|  | dma_addr_t tx_skbuff_dma[TX_RING_SIZE]; | 
|  |  | 
|  | /* Tx bounce buffers (Rhine-I only) */ | 
|  | unsigned char *tx_buf[TX_RING_SIZE]; | 
|  | unsigned char *tx_bufs; | 
|  | dma_addr_t tx_bufs_dma; | 
|  |  | 
|  | struct pci_dev *pdev; | 
|  | long pioaddr; | 
|  | struct net_device *dev; | 
|  | struct napi_struct napi; | 
|  | spinlock_t lock; | 
|  | struct work_struct reset_task; | 
|  |  | 
|  | /* Frequently used values: keep some adjacent for cache effect. */ | 
|  | u32 quirks; | 
|  | struct rx_desc *rx_head_desc; | 
|  | unsigned int cur_rx, dirty_rx;	/* Producer/consumer ring indices */ | 
|  | unsigned int cur_tx, dirty_tx; | 
|  | unsigned int rx_buf_sz;		/* Based on MTU+slack. */ | 
|  | u8 wolopts; | 
|  |  | 
|  | u8 tx_thresh, rx_thresh; | 
|  |  | 
|  | struct mii_if_info mii_if; | 
|  | void __iomem *base; | 
|  | }; | 
|  |  | 
|  | #define BYTE_REG_BITS_ON(x, p)      do { iowrite8((ioread8((p))|(x)), (p)); } while (0) | 
|  | #define WORD_REG_BITS_ON(x, p)      do { iowrite16((ioread16((p))|(x)), (p)); } while (0) | 
|  | #define DWORD_REG_BITS_ON(x, p)     do { iowrite32((ioread32((p))|(x)), (p)); } while (0) | 
|  |  | 
|  | #define BYTE_REG_BITS_IS_ON(x, p)   (ioread8((p)) & (x)) | 
|  | #define WORD_REG_BITS_IS_ON(x, p)   (ioread16((p)) & (x)) | 
|  | #define DWORD_REG_BITS_IS_ON(x, p)  (ioread32((p)) & (x)) | 
|  |  | 
|  | #define BYTE_REG_BITS_OFF(x, p)     do { iowrite8(ioread8((p)) & (~(x)), (p)); } while (0) | 
|  | #define WORD_REG_BITS_OFF(x, p)     do { iowrite16(ioread16((p)) & (~(x)), (p)); } while (0) | 
|  | #define DWORD_REG_BITS_OFF(x, p)    do { iowrite32(ioread32((p)) & (~(x)), (p)); } while (0) | 
|  |  | 
|  | #define BYTE_REG_BITS_SET(x, m, p)   do { iowrite8((ioread8((p)) & (~(m)))|(x), (p)); } while (0) | 
|  | #define WORD_REG_BITS_SET(x, m, p)   do { iowrite16((ioread16((p)) & (~(m)))|(x), (p)); } while (0) | 
|  | #define DWORD_REG_BITS_SET(x, m, p)  do { iowrite32((ioread32((p)) & (~(m)))|(x), (p)); } while (0) | 
|  |  | 
|  |  | 
|  | static int  mdio_read(struct net_device *dev, int phy_id, int location); | 
|  | static void mdio_write(struct net_device *dev, int phy_id, int location, int value); | 
|  | static int  rhine_open(struct net_device *dev); | 
|  | static void rhine_reset_task(struct work_struct *work); | 
|  | static void rhine_tx_timeout(struct net_device *dev); | 
|  | static netdev_tx_t rhine_start_tx(struct sk_buff *skb, | 
|  | struct net_device *dev); | 
|  | static irqreturn_t rhine_interrupt(int irq, void *dev_instance); | 
|  | static void rhine_tx(struct net_device *dev); | 
|  | static int rhine_rx(struct net_device *dev, int limit); | 
|  | static void rhine_error(struct net_device *dev, int intr_status); | 
|  | static void rhine_set_rx_mode(struct net_device *dev); | 
|  | static struct net_device_stats *rhine_get_stats(struct net_device *dev); | 
|  | static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); | 
|  | static const struct ethtool_ops netdev_ethtool_ops; | 
|  | static int  rhine_close(struct net_device *dev); | 
|  | static void rhine_shutdown (struct pci_dev *pdev); | 
|  | static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid); | 
|  | static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid); | 
|  | static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr); | 
|  | static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr); | 
|  | static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask); | 
|  | static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask); | 
|  | static void rhine_init_cam_filter(struct net_device *dev); | 
|  | static void rhine_update_vcam(struct net_device *dev); | 
|  |  | 
|  | #define RHINE_WAIT_FOR(condition)				\ | 
|  | do {								\ | 
|  | int i = 1024;						\ | 
|  | while (!(condition) && --i)				\ | 
|  | ;						\ | 
|  | if (debug > 1 && i < 512)				\ | 
|  | pr_info("%4d cycles used @ %s:%d\n",		\ | 
|  | 1024 - i, __func__, __LINE__);		\ | 
|  | } while (0) | 
|  |  | 
|  | static inline u32 get_intr_status(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  | u32 intr_status; | 
|  |  | 
|  | intr_status = ioread16(ioaddr + IntrStatus); | 
|  | /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */ | 
|  | if (rp->quirks & rqStatusWBRace) | 
|  | intr_status |= ioread8(ioaddr + IntrStatus2) << 16; | 
|  | return intr_status; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Get power related registers into sane state. | 
|  | * Notify user about past WOL event. | 
|  | */ | 
|  | static void rhine_power_init(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  | u16 wolstat; | 
|  |  | 
|  | if (rp->quirks & rqWOL) { | 
|  | /* Make sure chip is in power state D0 */ | 
|  | iowrite8(ioread8(ioaddr + StickyHW) & 0xFC, ioaddr + StickyHW); | 
|  |  | 
|  | /* Disable "force PME-enable" */ | 
|  | iowrite8(0x80, ioaddr + WOLcgClr); | 
|  |  | 
|  | /* Clear power-event config bits (WOL) */ | 
|  | iowrite8(0xFF, ioaddr + WOLcrClr); | 
|  | /* More recent cards can manage two additional patterns */ | 
|  | if (rp->quirks & rq6patterns) | 
|  | iowrite8(0x03, ioaddr + WOLcrClr1); | 
|  |  | 
|  | /* Save power-event status bits */ | 
|  | wolstat = ioread8(ioaddr + PwrcsrSet); | 
|  | if (rp->quirks & rq6patterns) | 
|  | wolstat |= (ioread8(ioaddr + PwrcsrSet1) & 0x03) << 8; | 
|  |  | 
|  | /* Clear power-event status bits */ | 
|  | iowrite8(0xFF, ioaddr + PwrcsrClr); | 
|  | if (rp->quirks & rq6patterns) | 
|  | iowrite8(0x03, ioaddr + PwrcsrClr1); | 
|  |  | 
|  | if (wolstat) { | 
|  | char *reason; | 
|  | switch (wolstat) { | 
|  | case WOLmagic: | 
|  | reason = "Magic packet"; | 
|  | break; | 
|  | case WOLlnkon: | 
|  | reason = "Link went up"; | 
|  | break; | 
|  | case WOLlnkoff: | 
|  | reason = "Link went down"; | 
|  | break; | 
|  | case WOLucast: | 
|  | reason = "Unicast packet"; | 
|  | break; | 
|  | case WOLbmcast: | 
|  | reason = "Multicast/broadcast packet"; | 
|  | break; | 
|  | default: | 
|  | reason = "Unknown"; | 
|  | } | 
|  | netdev_info(dev, "Woke system up. Reason: %s\n", | 
|  | reason); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void rhine_chip_reset(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  |  | 
|  | iowrite8(Cmd1Reset, ioaddr + ChipCmd1); | 
|  | IOSYNC; | 
|  |  | 
|  | if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) { | 
|  | netdev_info(dev, "Reset not complete yet. Trying harder.\n"); | 
|  |  | 
|  | /* Force reset */ | 
|  | if (rp->quirks & rqForceReset) | 
|  | iowrite8(0x40, ioaddr + MiscCmd); | 
|  |  | 
|  | /* Reset can take somewhat longer (rare) */ | 
|  | RHINE_WAIT_FOR(!(ioread8(ioaddr + ChipCmd1) & Cmd1Reset)); | 
|  | } | 
|  |  | 
|  | if (debug > 1) | 
|  | netdev_info(dev, "Reset %s\n", | 
|  | (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ? | 
|  | "failed" : "succeeded"); | 
|  | } | 
|  |  | 
|  | #ifdef USE_MMIO | 
|  | static void enable_mmio(long pioaddr, u32 quirks) | 
|  | { | 
|  | int n; | 
|  | if (quirks & rqRhineI) { | 
|  | /* More recent docs say that this bit is reserved ... */ | 
|  | n = inb(pioaddr + ConfigA) | 0x20; | 
|  | outb(n, pioaddr + ConfigA); | 
|  | } else { | 
|  | n = inb(pioaddr + ConfigD) | 0x80; | 
|  | outb(n, pioaddr + ConfigD); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM | 
|  | * (plus 0x6C for Rhine-I/II) | 
|  | */ | 
|  | static void __devinit rhine_reload_eeprom(long pioaddr, struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  |  | 
|  | outb(0x20, pioaddr + MACRegEEcsr); | 
|  | RHINE_WAIT_FOR(!(inb(pioaddr + MACRegEEcsr) & 0x20)); | 
|  |  | 
|  | #ifdef USE_MMIO | 
|  | /* | 
|  | * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable | 
|  | * MMIO. If reloading EEPROM was done first this could be avoided, but | 
|  | * it is not known if that still works with the "win98-reboot" problem. | 
|  | */ | 
|  | enable_mmio(pioaddr, rp->quirks); | 
|  | #endif | 
|  |  | 
|  | /* Turn off EEPROM-controlled wake-up (magic packet) */ | 
|  | if (rp->quirks & rqWOL) | 
|  | iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA); | 
|  |  | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | static void rhine_poll(struct net_device *dev) | 
|  | { | 
|  | disable_irq(dev->irq); | 
|  | rhine_interrupt(dev->irq, (void *)dev); | 
|  | enable_irq(dev->irq); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int rhine_napipoll(struct napi_struct *napi, int budget) | 
|  | { | 
|  | struct rhine_private *rp = container_of(napi, struct rhine_private, napi); | 
|  | struct net_device *dev = rp->dev; | 
|  | void __iomem *ioaddr = rp->base; | 
|  | int work_done; | 
|  |  | 
|  | work_done = rhine_rx(dev, budget); | 
|  |  | 
|  | if (work_done < budget) { | 
|  | napi_complete(napi); | 
|  |  | 
|  | iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | | 
|  | IntrRxDropped | IntrRxNoBuf | IntrTxAborted | | 
|  | IntrTxDone | IntrTxError | IntrTxUnderrun | | 
|  | IntrPCIErr | IntrStatsMax | IntrLinkChange, | 
|  | ioaddr + IntrEnable); | 
|  | } | 
|  | return work_done; | 
|  | } | 
|  |  | 
|  | static void __devinit rhine_hw_init(struct net_device *dev, long pioaddr) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  |  | 
|  | /* Reset the chip to erase previous misconfiguration. */ | 
|  | rhine_chip_reset(dev); | 
|  |  | 
|  | /* Rhine-I needs extra time to recuperate before EEPROM reload */ | 
|  | if (rp->quirks & rqRhineI) | 
|  | msleep(5); | 
|  |  | 
|  | /* Reload EEPROM controlled bytes cleared by soft reset */ | 
|  | rhine_reload_eeprom(pioaddr, dev); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops rhine_netdev_ops = { | 
|  | .ndo_open		 = rhine_open, | 
|  | .ndo_stop		 = rhine_close, | 
|  | .ndo_start_xmit		 = rhine_start_tx, | 
|  | .ndo_get_stats		 = rhine_get_stats, | 
|  | .ndo_set_multicast_list	 = rhine_set_rx_mode, | 
|  | .ndo_change_mtu		 = eth_change_mtu, | 
|  | .ndo_validate_addr	 = eth_validate_addr, | 
|  | .ndo_set_mac_address 	 = eth_mac_addr, | 
|  | .ndo_do_ioctl		 = netdev_ioctl, | 
|  | .ndo_tx_timeout 	 = rhine_tx_timeout, | 
|  | .ndo_vlan_rx_add_vid	 = rhine_vlan_rx_add_vid, | 
|  | .ndo_vlan_rx_kill_vid	 = rhine_vlan_rx_kill_vid, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller	 = rhine_poll, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static int __devinit rhine_init_one(struct pci_dev *pdev, | 
|  | const struct pci_device_id *ent) | 
|  | { | 
|  | struct net_device *dev; | 
|  | struct rhine_private *rp; | 
|  | int i, rc; | 
|  | u32 quirks; | 
|  | long pioaddr; | 
|  | long memaddr; | 
|  | void __iomem *ioaddr; | 
|  | int io_size, phy_id; | 
|  | const char *name; | 
|  | #ifdef USE_MMIO | 
|  | int bar = 1; | 
|  | #else | 
|  | int bar = 0; | 
|  | #endif | 
|  |  | 
|  | /* when built into the kernel, we only print version if device is found */ | 
|  | #ifndef MODULE | 
|  | pr_info_once("%s\n", version); | 
|  | #endif | 
|  |  | 
|  | io_size = 256; | 
|  | phy_id = 0; | 
|  | quirks = 0; | 
|  | name = "Rhine"; | 
|  | if (pdev->revision < VTunknown0) { | 
|  | quirks = rqRhineI; | 
|  | io_size = 128; | 
|  | } | 
|  | else if (pdev->revision >= VT6102) { | 
|  | quirks = rqWOL | rqForceReset; | 
|  | if (pdev->revision < VT6105) { | 
|  | name = "Rhine II"; | 
|  | quirks |= rqStatusWBRace;	/* Rhine-II exclusive */ | 
|  | } | 
|  | else { | 
|  | phy_id = 1;	/* Integrated PHY, phy_id fixed to 1 */ | 
|  | if (pdev->revision >= VT6105_B0) | 
|  | quirks |= rq6patterns; | 
|  | if (pdev->revision < VT6105M) | 
|  | name = "Rhine III"; | 
|  | else | 
|  | name = "Rhine III (Management Adapter)"; | 
|  | } | 
|  | } | 
|  |  | 
|  | rc = pci_enable_device(pdev); | 
|  | if (rc) | 
|  | goto err_out; | 
|  |  | 
|  | /* this should always be supported */ | 
|  | rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); | 
|  | if (rc) { | 
|  | dev_err(&pdev->dev, | 
|  | "32-bit PCI DMA addresses not supported by the card!?\n"); | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | /* sanity check */ | 
|  | if ((pci_resource_len(pdev, 0) < io_size) || | 
|  | (pci_resource_len(pdev, 1) < io_size)) { | 
|  | rc = -EIO; | 
|  | dev_err(&pdev->dev, "Insufficient PCI resources, aborting\n"); | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | pioaddr = pci_resource_start(pdev, 0); | 
|  | memaddr = pci_resource_start(pdev, 1); | 
|  |  | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | dev = alloc_etherdev(sizeof(struct rhine_private)); | 
|  | if (!dev) { | 
|  | rc = -ENOMEM; | 
|  | dev_err(&pdev->dev, "alloc_etherdev failed\n"); | 
|  | goto err_out; | 
|  | } | 
|  | SET_NETDEV_DEV(dev, &pdev->dev); | 
|  |  | 
|  | rp = netdev_priv(dev); | 
|  | rp->dev = dev; | 
|  | rp->quirks = quirks; | 
|  | rp->pioaddr = pioaddr; | 
|  | rp->pdev = pdev; | 
|  |  | 
|  | rc = pci_request_regions(pdev, DRV_NAME); | 
|  | if (rc) | 
|  | goto err_out_free_netdev; | 
|  |  | 
|  | ioaddr = pci_iomap(pdev, bar, io_size); | 
|  | if (!ioaddr) { | 
|  | rc = -EIO; | 
|  | dev_err(&pdev->dev, | 
|  | "ioremap failed for device %s, region 0x%X @ 0x%lX\n", | 
|  | pci_name(pdev), io_size, memaddr); | 
|  | goto err_out_free_res; | 
|  | } | 
|  |  | 
|  | #ifdef USE_MMIO | 
|  | enable_mmio(pioaddr, quirks); | 
|  |  | 
|  | /* Check that selected MMIO registers match the PIO ones */ | 
|  | i = 0; | 
|  | while (mmio_verify_registers[i]) { | 
|  | int reg = mmio_verify_registers[i++]; | 
|  | unsigned char a = inb(pioaddr+reg); | 
|  | unsigned char b = readb(ioaddr+reg); | 
|  | if (a != b) { | 
|  | rc = -EIO; | 
|  | dev_err(&pdev->dev, | 
|  | "MMIO do not match PIO [%02x] (%02x != %02x)\n", | 
|  | reg, a, b); | 
|  | goto err_out_unmap; | 
|  | } | 
|  | } | 
|  | #endif /* USE_MMIO */ | 
|  |  | 
|  | dev->base_addr = (unsigned long)ioaddr; | 
|  | rp->base = ioaddr; | 
|  |  | 
|  | /* Get chip registers into a sane state */ | 
|  | rhine_power_init(dev); | 
|  | rhine_hw_init(dev, pioaddr); | 
|  |  | 
|  | for (i = 0; i < 6; i++) | 
|  | dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i); | 
|  |  | 
|  | if (!is_valid_ether_addr(dev->dev_addr)) { | 
|  | /* Report it and use a random ethernet address instead */ | 
|  | netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr); | 
|  | random_ether_addr(dev->dev_addr); | 
|  | netdev_info(dev, "Using random MAC address: %pM\n", | 
|  | dev->dev_addr); | 
|  | } | 
|  | memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); | 
|  |  | 
|  | /* For Rhine-I/II, phy_id is loaded from EEPROM */ | 
|  | if (!phy_id) | 
|  | phy_id = ioread8(ioaddr + 0x6C); | 
|  |  | 
|  | dev->irq = pdev->irq; | 
|  |  | 
|  | spin_lock_init(&rp->lock); | 
|  | INIT_WORK(&rp->reset_task, rhine_reset_task); | 
|  |  | 
|  | rp->mii_if.dev = dev; | 
|  | rp->mii_if.mdio_read = mdio_read; | 
|  | rp->mii_if.mdio_write = mdio_write; | 
|  | rp->mii_if.phy_id_mask = 0x1f; | 
|  | rp->mii_if.reg_num_mask = 0x1f; | 
|  |  | 
|  | /* The chip-specific entries in the device structure. */ | 
|  | dev->netdev_ops = &rhine_netdev_ops; | 
|  | dev->ethtool_ops = &netdev_ethtool_ops, | 
|  | dev->watchdog_timeo = TX_TIMEOUT; | 
|  |  | 
|  | netif_napi_add(dev, &rp->napi, rhine_napipoll, 64); | 
|  |  | 
|  | if (rp->quirks & rqRhineI) | 
|  | dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM; | 
|  |  | 
|  | if (pdev->revision >= VT6105M) | 
|  | dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | | 
|  | NETIF_F_HW_VLAN_FILTER; | 
|  |  | 
|  | /* dev->name not defined before register_netdev()! */ | 
|  | rc = register_netdev(dev); | 
|  | if (rc) | 
|  | goto err_out_unmap; | 
|  |  | 
|  | netdev_info(dev, "VIA %s at 0x%lx, %pM, IRQ %d\n", | 
|  | name, | 
|  | #ifdef USE_MMIO | 
|  | memaddr, | 
|  | #else | 
|  | (long)ioaddr, | 
|  | #endif | 
|  | dev->dev_addr, pdev->irq); | 
|  |  | 
|  | pci_set_drvdata(pdev, dev); | 
|  |  | 
|  | { | 
|  | u16 mii_cmd; | 
|  | int mii_status = mdio_read(dev, phy_id, 1); | 
|  | mii_cmd = mdio_read(dev, phy_id, MII_BMCR) & ~BMCR_ISOLATE; | 
|  | mdio_write(dev, phy_id, MII_BMCR, mii_cmd); | 
|  | if (mii_status != 0xffff && mii_status != 0x0000) { | 
|  | rp->mii_if.advertising = mdio_read(dev, phy_id, 4); | 
|  | netdev_info(dev, | 
|  | "MII PHY found at address %d, status 0x%04x advertising %04x Link %04x\n", | 
|  | phy_id, | 
|  | mii_status, rp->mii_if.advertising, | 
|  | mdio_read(dev, phy_id, 5)); | 
|  |  | 
|  | /* set IFF_RUNNING */ | 
|  | if (mii_status & BMSR_LSTATUS) | 
|  | netif_carrier_on(dev); | 
|  | else | 
|  | netif_carrier_off(dev); | 
|  |  | 
|  | } | 
|  | } | 
|  | rp->mii_if.phy_id = phy_id; | 
|  | if (debug > 1 && avoid_D3) | 
|  | netdev_info(dev, "No D3 power state at shutdown\n"); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_out_unmap: | 
|  | pci_iounmap(pdev, ioaddr); | 
|  | err_out_free_res: | 
|  | pci_release_regions(pdev); | 
|  | err_out_free_netdev: | 
|  | free_netdev(dev); | 
|  | err_out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int alloc_ring(struct net_device* dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void *ring; | 
|  | dma_addr_t ring_dma; | 
|  |  | 
|  | ring = pci_alloc_consistent(rp->pdev, | 
|  | RX_RING_SIZE * sizeof(struct rx_desc) + | 
|  | TX_RING_SIZE * sizeof(struct tx_desc), | 
|  | &ring_dma); | 
|  | if (!ring) { | 
|  | netdev_err(dev, "Could not allocate DMA memory\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | if (rp->quirks & rqRhineI) { | 
|  | rp->tx_bufs = pci_alloc_consistent(rp->pdev, | 
|  | PKT_BUF_SZ * TX_RING_SIZE, | 
|  | &rp->tx_bufs_dma); | 
|  | if (rp->tx_bufs == NULL) { | 
|  | pci_free_consistent(rp->pdev, | 
|  | RX_RING_SIZE * sizeof(struct rx_desc) + | 
|  | TX_RING_SIZE * sizeof(struct tx_desc), | 
|  | ring, ring_dma); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  |  | 
|  | rp->rx_ring = ring; | 
|  | rp->tx_ring = ring + RX_RING_SIZE * sizeof(struct rx_desc); | 
|  | rp->rx_ring_dma = ring_dma; | 
|  | rp->tx_ring_dma = ring_dma + RX_RING_SIZE * sizeof(struct rx_desc); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void free_ring(struct net_device* dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  |  | 
|  | pci_free_consistent(rp->pdev, | 
|  | RX_RING_SIZE * sizeof(struct rx_desc) + | 
|  | TX_RING_SIZE * sizeof(struct tx_desc), | 
|  | rp->rx_ring, rp->rx_ring_dma); | 
|  | rp->tx_ring = NULL; | 
|  |  | 
|  | if (rp->tx_bufs) | 
|  | pci_free_consistent(rp->pdev, PKT_BUF_SZ * TX_RING_SIZE, | 
|  | rp->tx_bufs, rp->tx_bufs_dma); | 
|  |  | 
|  | rp->tx_bufs = NULL; | 
|  |  | 
|  | } | 
|  |  | 
|  | static void alloc_rbufs(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | dma_addr_t next; | 
|  | int i; | 
|  |  | 
|  | rp->dirty_rx = rp->cur_rx = 0; | 
|  |  | 
|  | rp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); | 
|  | rp->rx_head_desc = &rp->rx_ring[0]; | 
|  | next = rp->rx_ring_dma; | 
|  |  | 
|  | /* Init the ring entries */ | 
|  | for (i = 0; i < RX_RING_SIZE; i++) { | 
|  | rp->rx_ring[i].rx_status = 0; | 
|  | rp->rx_ring[i].desc_length = cpu_to_le32(rp->rx_buf_sz); | 
|  | next += sizeof(struct rx_desc); | 
|  | rp->rx_ring[i].next_desc = cpu_to_le32(next); | 
|  | rp->rx_skbuff[i] = NULL; | 
|  | } | 
|  | /* Mark the last entry as wrapping the ring. */ | 
|  | rp->rx_ring[i-1].next_desc = cpu_to_le32(rp->rx_ring_dma); | 
|  |  | 
|  | /* Fill in the Rx buffers.  Handle allocation failure gracefully. */ | 
|  | for (i = 0; i < RX_RING_SIZE; i++) { | 
|  | struct sk_buff *skb = netdev_alloc_skb(dev, rp->rx_buf_sz); | 
|  | rp->rx_skbuff[i] = skb; | 
|  | if (skb == NULL) | 
|  | break; | 
|  | skb->dev = dev;                 /* Mark as being used by this device. */ | 
|  |  | 
|  | rp->rx_skbuff_dma[i] = | 
|  | pci_map_single(rp->pdev, skb->data, rp->rx_buf_sz, | 
|  | PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | rp->rx_ring[i].addr = cpu_to_le32(rp->rx_skbuff_dma[i]); | 
|  | rp->rx_ring[i].rx_status = cpu_to_le32(DescOwn); | 
|  | } | 
|  | rp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); | 
|  | } | 
|  |  | 
|  | static void free_rbufs(struct net_device* dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | int i; | 
|  |  | 
|  | /* Free all the skbuffs in the Rx queue. */ | 
|  | for (i = 0; i < RX_RING_SIZE; i++) { | 
|  | rp->rx_ring[i].rx_status = 0; | 
|  | rp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ | 
|  | if (rp->rx_skbuff[i]) { | 
|  | pci_unmap_single(rp->pdev, | 
|  | rp->rx_skbuff_dma[i], | 
|  | rp->rx_buf_sz, PCI_DMA_FROMDEVICE); | 
|  | dev_kfree_skb(rp->rx_skbuff[i]); | 
|  | } | 
|  | rp->rx_skbuff[i] = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void alloc_tbufs(struct net_device* dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | dma_addr_t next; | 
|  | int i; | 
|  |  | 
|  | rp->dirty_tx = rp->cur_tx = 0; | 
|  | next = rp->tx_ring_dma; | 
|  | for (i = 0; i < TX_RING_SIZE; i++) { | 
|  | rp->tx_skbuff[i] = NULL; | 
|  | rp->tx_ring[i].tx_status = 0; | 
|  | rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC); | 
|  | next += sizeof(struct tx_desc); | 
|  | rp->tx_ring[i].next_desc = cpu_to_le32(next); | 
|  | if (rp->quirks & rqRhineI) | 
|  | rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ]; | 
|  | } | 
|  | rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma); | 
|  |  | 
|  | } | 
|  |  | 
|  | static void free_tbufs(struct net_device* dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < TX_RING_SIZE; i++) { | 
|  | rp->tx_ring[i].tx_status = 0; | 
|  | rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC); | 
|  | rp->tx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ | 
|  | if (rp->tx_skbuff[i]) { | 
|  | if (rp->tx_skbuff_dma[i]) { | 
|  | pci_unmap_single(rp->pdev, | 
|  | rp->tx_skbuff_dma[i], | 
|  | rp->tx_skbuff[i]->len, | 
|  | PCI_DMA_TODEVICE); | 
|  | } | 
|  | dev_kfree_skb(rp->tx_skbuff[i]); | 
|  | } | 
|  | rp->tx_skbuff[i] = NULL; | 
|  | rp->tx_buf[i] = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void rhine_check_media(struct net_device *dev, unsigned int init_media) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  |  | 
|  | mii_check_media(&rp->mii_if, debug, init_media); | 
|  |  | 
|  | if (rp->mii_if.full_duplex) | 
|  | iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1FDuplex, | 
|  | ioaddr + ChipCmd1); | 
|  | else | 
|  | iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex, | 
|  | ioaddr + ChipCmd1); | 
|  | if (debug > 1) | 
|  | netdev_info(dev, "force_media %d, carrier %d\n", | 
|  | rp->mii_if.force_media, netif_carrier_ok(dev)); | 
|  | } | 
|  |  | 
|  | /* Called after status of force_media possibly changed */ | 
|  | static void rhine_set_carrier(struct mii_if_info *mii) | 
|  | { | 
|  | if (mii->force_media) { | 
|  | /* autoneg is off: Link is always assumed to be up */ | 
|  | if (!netif_carrier_ok(mii->dev)) | 
|  | netif_carrier_on(mii->dev); | 
|  | } | 
|  | else	/* Let MMI library update carrier status */ | 
|  | rhine_check_media(mii->dev, 0); | 
|  | if (debug > 1) | 
|  | netdev_info(mii->dev, "force_media %d, carrier %d\n", | 
|  | mii->force_media, netif_carrier_ok(mii->dev)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rhine_set_cam - set CAM multicast filters | 
|  | * @ioaddr: register block of this Rhine | 
|  | * @idx: multicast CAM index [0..MCAM_SIZE-1] | 
|  | * @addr: multicast address (6 bytes) | 
|  | * | 
|  | * Load addresses into multicast filters. | 
|  | */ | 
|  | static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | iowrite8(CAMC_CAMEN, ioaddr + CamCon); | 
|  | wmb(); | 
|  |  | 
|  | /* Paranoid -- idx out of range should never happen */ | 
|  | idx &= (MCAM_SIZE - 1); | 
|  |  | 
|  | iowrite8((u8) idx, ioaddr + CamAddr); | 
|  |  | 
|  | for (i = 0; i < 6; i++, addr++) | 
|  | iowrite8(*addr, ioaddr + MulticastFilter0 + i); | 
|  | udelay(10); | 
|  | wmb(); | 
|  |  | 
|  | iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon); | 
|  | udelay(10); | 
|  |  | 
|  | iowrite8(0, ioaddr + CamCon); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rhine_set_vlan_cam - set CAM VLAN filters | 
|  | * @ioaddr: register block of this Rhine | 
|  | * @idx: VLAN CAM index [0..VCAM_SIZE-1] | 
|  | * @addr: VLAN ID (2 bytes) | 
|  | * | 
|  | * Load addresses into VLAN filters. | 
|  | */ | 
|  | static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr) | 
|  | { | 
|  | iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon); | 
|  | wmb(); | 
|  |  | 
|  | /* Paranoid -- idx out of range should never happen */ | 
|  | idx &= (VCAM_SIZE - 1); | 
|  |  | 
|  | iowrite8((u8) idx, ioaddr + CamAddr); | 
|  |  | 
|  | iowrite16(*((u16 *) addr), ioaddr + MulticastFilter0 + 6); | 
|  | udelay(10); | 
|  | wmb(); | 
|  |  | 
|  | iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon); | 
|  | udelay(10); | 
|  |  | 
|  | iowrite8(0, ioaddr + CamCon); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rhine_set_cam_mask - set multicast CAM mask | 
|  | * @ioaddr: register block of this Rhine | 
|  | * @mask: multicast CAM mask | 
|  | * | 
|  | * Mask sets multicast filters active/inactive. | 
|  | */ | 
|  | static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask) | 
|  | { | 
|  | iowrite8(CAMC_CAMEN, ioaddr + CamCon); | 
|  | wmb(); | 
|  |  | 
|  | /* write mask */ | 
|  | iowrite32(mask, ioaddr + CamMask); | 
|  |  | 
|  | /* disable CAMEN */ | 
|  | iowrite8(0, ioaddr + CamCon); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rhine_set_vlan_cam_mask - set VLAN CAM mask | 
|  | * @ioaddr: register block of this Rhine | 
|  | * @mask: VLAN CAM mask | 
|  | * | 
|  | * Mask sets VLAN filters active/inactive. | 
|  | */ | 
|  | static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask) | 
|  | { | 
|  | iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon); | 
|  | wmb(); | 
|  |  | 
|  | /* write mask */ | 
|  | iowrite32(mask, ioaddr + CamMask); | 
|  |  | 
|  | /* disable CAMEN */ | 
|  | iowrite8(0, ioaddr + CamCon); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rhine_init_cam_filter - initialize CAM filters | 
|  | * @dev: network device | 
|  | * | 
|  | * Initialize (disable) hardware VLAN and multicast support on this | 
|  | * Rhine. | 
|  | */ | 
|  | static void rhine_init_cam_filter(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  |  | 
|  | /* Disable all CAMs */ | 
|  | rhine_set_vlan_cam_mask(ioaddr, 0); | 
|  | rhine_set_cam_mask(ioaddr, 0); | 
|  |  | 
|  | /* disable hardware VLAN support */ | 
|  | BYTE_REG_BITS_ON(TCR_PQEN, ioaddr + TxConfig); | 
|  | BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rhine_update_vcam - update VLAN CAM filters | 
|  | * @rp: rhine_private data of this Rhine | 
|  | * | 
|  | * Update VLAN CAM filters to match configuration change. | 
|  | */ | 
|  | static void rhine_update_vcam(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  | u16 vid; | 
|  | u32 vCAMmask = 0;	/* 32 vCAMs (6105M and better) */ | 
|  | unsigned int i = 0; | 
|  |  | 
|  | for_each_set_bit(vid, rp->active_vlans, VLAN_N_VID) { | 
|  | rhine_set_vlan_cam(ioaddr, i, (u8 *)&vid); | 
|  | vCAMmask |= 1 << i; | 
|  | if (++i >= VCAM_SIZE) | 
|  | break; | 
|  | } | 
|  | rhine_set_vlan_cam_mask(ioaddr, vCAMmask); | 
|  | } | 
|  |  | 
|  | static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  |  | 
|  | spin_lock_irq(&rp->lock); | 
|  | set_bit(vid, rp->active_vlans); | 
|  | rhine_update_vcam(dev); | 
|  | spin_unlock_irq(&rp->lock); | 
|  | } | 
|  |  | 
|  | static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  |  | 
|  | spin_lock_irq(&rp->lock); | 
|  | clear_bit(vid, rp->active_vlans); | 
|  | rhine_update_vcam(dev); | 
|  | spin_unlock_irq(&rp->lock); | 
|  | } | 
|  |  | 
|  | static void init_registers(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < 6; i++) | 
|  | iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i); | 
|  |  | 
|  | /* Initialize other registers. */ | 
|  | iowrite16(0x0006, ioaddr + PCIBusConfig);	/* Tune configuration??? */ | 
|  | /* Configure initial FIFO thresholds. */ | 
|  | iowrite8(0x20, ioaddr + TxConfig); | 
|  | rp->tx_thresh = 0x20; | 
|  | rp->rx_thresh = 0x60;		/* Written in rhine_set_rx_mode(). */ | 
|  |  | 
|  | iowrite32(rp->rx_ring_dma, ioaddr + RxRingPtr); | 
|  | iowrite32(rp->tx_ring_dma, ioaddr + TxRingPtr); | 
|  |  | 
|  | rhine_set_rx_mode(dev); | 
|  |  | 
|  | if (rp->pdev->revision >= VT6105M) | 
|  | rhine_init_cam_filter(dev); | 
|  |  | 
|  | napi_enable(&rp->napi); | 
|  |  | 
|  | /* Enable interrupts by setting the interrupt mask. */ | 
|  | iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | | 
|  | IntrRxDropped | IntrRxNoBuf | IntrTxAborted | | 
|  | IntrTxDone | IntrTxError | IntrTxUnderrun | | 
|  | IntrPCIErr | IntrStatsMax | IntrLinkChange, | 
|  | ioaddr + IntrEnable); | 
|  |  | 
|  | iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8), | 
|  | ioaddr + ChipCmd); | 
|  | rhine_check_media(dev, 1); | 
|  | } | 
|  |  | 
|  | /* Enable MII link status auto-polling (required for IntrLinkChange) */ | 
|  | static void rhine_enable_linkmon(void __iomem *ioaddr) | 
|  | { | 
|  | iowrite8(0, ioaddr + MIICmd); | 
|  | iowrite8(MII_BMSR, ioaddr + MIIRegAddr); | 
|  | iowrite8(0x80, ioaddr + MIICmd); | 
|  |  | 
|  | RHINE_WAIT_FOR((ioread8(ioaddr + MIIRegAddr) & 0x20)); | 
|  |  | 
|  | iowrite8(MII_BMSR | 0x40, ioaddr + MIIRegAddr); | 
|  | } | 
|  |  | 
|  | /* Disable MII link status auto-polling (required for MDIO access) */ | 
|  | static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks) | 
|  | { | 
|  | iowrite8(0, ioaddr + MIICmd); | 
|  |  | 
|  | if (quirks & rqRhineI) { | 
|  | iowrite8(0x01, ioaddr + MIIRegAddr);	// MII_BMSR | 
|  |  | 
|  | /* Can be called from ISR. Evil. */ | 
|  | mdelay(1); | 
|  |  | 
|  | /* 0x80 must be set immediately before turning it off */ | 
|  | iowrite8(0x80, ioaddr + MIICmd); | 
|  |  | 
|  | RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x20); | 
|  |  | 
|  | /* Heh. Now clear 0x80 again. */ | 
|  | iowrite8(0, ioaddr + MIICmd); | 
|  | } | 
|  | else | 
|  | RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x80); | 
|  | } | 
|  |  | 
|  | /* Read and write over the MII Management Data I/O (MDIO) interface. */ | 
|  |  | 
|  | static int mdio_read(struct net_device *dev, int phy_id, int regnum) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  | int result; | 
|  |  | 
|  | rhine_disable_linkmon(ioaddr, rp->quirks); | 
|  |  | 
|  | /* rhine_disable_linkmon already cleared MIICmd */ | 
|  | iowrite8(phy_id, ioaddr + MIIPhyAddr); | 
|  | iowrite8(regnum, ioaddr + MIIRegAddr); | 
|  | iowrite8(0x40, ioaddr + MIICmd);		/* Trigger read */ | 
|  | RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x40)); | 
|  | result = ioread16(ioaddr + MIIData); | 
|  |  | 
|  | rhine_enable_linkmon(ioaddr); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  |  | 
|  | rhine_disable_linkmon(ioaddr, rp->quirks); | 
|  |  | 
|  | /* rhine_disable_linkmon already cleared MIICmd */ | 
|  | iowrite8(phy_id, ioaddr + MIIPhyAddr); | 
|  | iowrite8(regnum, ioaddr + MIIRegAddr); | 
|  | iowrite16(value, ioaddr + MIIData); | 
|  | iowrite8(0x20, ioaddr + MIICmd);		/* Trigger write */ | 
|  | RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x20)); | 
|  |  | 
|  | rhine_enable_linkmon(ioaddr); | 
|  | } | 
|  |  | 
|  | static int rhine_open(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  | int rc; | 
|  |  | 
|  | rc = request_irq(rp->pdev->irq, rhine_interrupt, IRQF_SHARED, dev->name, | 
|  | dev); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | if (debug > 1) | 
|  | netdev_dbg(dev, "%s() irq %d\n", __func__, rp->pdev->irq); | 
|  |  | 
|  | rc = alloc_ring(dev); | 
|  | if (rc) { | 
|  | free_irq(rp->pdev->irq, dev); | 
|  | return rc; | 
|  | } | 
|  | alloc_rbufs(dev); | 
|  | alloc_tbufs(dev); | 
|  | rhine_chip_reset(dev); | 
|  | init_registers(dev); | 
|  | if (debug > 2) | 
|  | netdev_dbg(dev, "%s() Done - status %04x MII status: %04x\n", | 
|  | __func__, ioread16(ioaddr + ChipCmd), | 
|  | mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); | 
|  |  | 
|  | netif_start_queue(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void rhine_reset_task(struct work_struct *work) | 
|  | { | 
|  | struct rhine_private *rp = container_of(work, struct rhine_private, | 
|  | reset_task); | 
|  | struct net_device *dev = rp->dev; | 
|  |  | 
|  | /* protect against concurrent rx interrupts */ | 
|  | disable_irq(rp->pdev->irq); | 
|  |  | 
|  | napi_disable(&rp->napi); | 
|  |  | 
|  | spin_lock_bh(&rp->lock); | 
|  |  | 
|  | /* clear all descriptors */ | 
|  | free_tbufs(dev); | 
|  | free_rbufs(dev); | 
|  | alloc_tbufs(dev); | 
|  | alloc_rbufs(dev); | 
|  |  | 
|  | /* Reinitialize the hardware. */ | 
|  | rhine_chip_reset(dev); | 
|  | init_registers(dev); | 
|  |  | 
|  | spin_unlock_bh(&rp->lock); | 
|  | enable_irq(rp->pdev->irq); | 
|  |  | 
|  | dev->trans_start = jiffies; /* prevent tx timeout */ | 
|  | dev->stats.tx_errors++; | 
|  | netif_wake_queue(dev); | 
|  | } | 
|  |  | 
|  | static void rhine_tx_timeout(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  |  | 
|  | netdev_warn(dev, "Transmit timed out, status %04x, PHY status %04x, resetting...\n", | 
|  | ioread16(ioaddr + IntrStatus), | 
|  | mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); | 
|  |  | 
|  | schedule_work(&rp->reset_task); | 
|  | } | 
|  |  | 
|  | static netdev_tx_t rhine_start_tx(struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  | unsigned entry; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* Caution: the write order is important here, set the field | 
|  | with the "ownership" bits last. */ | 
|  |  | 
|  | /* Calculate the next Tx descriptor entry. */ | 
|  | entry = rp->cur_tx % TX_RING_SIZE; | 
|  |  | 
|  | if (skb_padto(skb, ETH_ZLEN)) | 
|  | return NETDEV_TX_OK; | 
|  |  | 
|  | rp->tx_skbuff[entry] = skb; | 
|  |  | 
|  | if ((rp->quirks & rqRhineI) && | 
|  | (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_PARTIAL)) { | 
|  | /* Must use alignment buffer. */ | 
|  | if (skb->len > PKT_BUF_SZ) { | 
|  | /* packet too long, drop it */ | 
|  | dev_kfree_skb(skb); | 
|  | rp->tx_skbuff[entry] = NULL; | 
|  | dev->stats.tx_dropped++; | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | /* Padding is not copied and so must be redone. */ | 
|  | skb_copy_and_csum_dev(skb, rp->tx_buf[entry]); | 
|  | if (skb->len < ETH_ZLEN) | 
|  | memset(rp->tx_buf[entry] + skb->len, 0, | 
|  | ETH_ZLEN - skb->len); | 
|  | rp->tx_skbuff_dma[entry] = 0; | 
|  | rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma + | 
|  | (rp->tx_buf[entry] - | 
|  | rp->tx_bufs)); | 
|  | } else { | 
|  | rp->tx_skbuff_dma[entry] = | 
|  | pci_map_single(rp->pdev, skb->data, skb->len, | 
|  | PCI_DMA_TODEVICE); | 
|  | rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_skbuff_dma[entry]); | 
|  | } | 
|  |  | 
|  | rp->tx_ring[entry].desc_length = | 
|  | cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN)); | 
|  |  | 
|  | if (unlikely(vlan_tx_tag_present(skb))) { | 
|  | rp->tx_ring[entry].tx_status = cpu_to_le32((vlan_tx_tag_get(skb)) << 16); | 
|  | /* request tagging */ | 
|  | rp->tx_ring[entry].desc_length |= cpu_to_le32(0x020000); | 
|  | } | 
|  | else | 
|  | rp->tx_ring[entry].tx_status = 0; | 
|  |  | 
|  | /* lock eth irq */ | 
|  | spin_lock_irqsave(&rp->lock, flags); | 
|  | wmb(); | 
|  | rp->tx_ring[entry].tx_status |= cpu_to_le32(DescOwn); | 
|  | wmb(); | 
|  |  | 
|  | rp->cur_tx++; | 
|  |  | 
|  | /* Non-x86 Todo: explicitly flush cache lines here. */ | 
|  |  | 
|  | if (vlan_tx_tag_present(skb)) | 
|  | /* Tx queues are bits 7-0 (first Tx queue: bit 7) */ | 
|  | BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake); | 
|  |  | 
|  | /* Wake the potentially-idle transmit channel */ | 
|  | iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand, | 
|  | ioaddr + ChipCmd1); | 
|  | IOSYNC; | 
|  |  | 
|  | if (rp->cur_tx == rp->dirty_tx + TX_QUEUE_LEN) | 
|  | netif_stop_queue(dev); | 
|  |  | 
|  | spin_unlock_irqrestore(&rp->lock, flags); | 
|  |  | 
|  | if (debug > 4) { | 
|  | netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n", | 
|  | rp->cur_tx-1, entry); | 
|  | } | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | /* The interrupt handler does all of the Rx thread work and cleans up | 
|  | after the Tx thread. */ | 
|  | static irqreturn_t rhine_interrupt(int irq, void *dev_instance) | 
|  | { | 
|  | struct net_device *dev = dev_instance; | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  | u32 intr_status; | 
|  | int boguscnt = max_interrupt_work; | 
|  | int handled = 0; | 
|  |  | 
|  | while ((intr_status = get_intr_status(dev))) { | 
|  | handled = 1; | 
|  |  | 
|  | /* Acknowledge all of the current interrupt sources ASAP. */ | 
|  | if (intr_status & IntrTxDescRace) | 
|  | iowrite8(0x08, ioaddr + IntrStatus2); | 
|  | iowrite16(intr_status & 0xffff, ioaddr + IntrStatus); | 
|  | IOSYNC; | 
|  |  | 
|  | if (debug > 4) | 
|  | netdev_dbg(dev, "Interrupt, status %08x\n", | 
|  | intr_status); | 
|  |  | 
|  | if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped | | 
|  | IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) { | 
|  | iowrite16(IntrTxAborted | | 
|  | IntrTxDone | IntrTxError | IntrTxUnderrun | | 
|  | IntrPCIErr | IntrStatsMax | IntrLinkChange, | 
|  | ioaddr + IntrEnable); | 
|  |  | 
|  | napi_schedule(&rp->napi); | 
|  | } | 
|  |  | 
|  | if (intr_status & (IntrTxErrSummary | IntrTxDone)) { | 
|  | if (intr_status & IntrTxErrSummary) { | 
|  | /* Avoid scavenging before Tx engine turned off */ | 
|  | RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn)); | 
|  | if (debug > 2 && | 
|  | ioread8(ioaddr+ChipCmd) & CmdTxOn) | 
|  | netdev_warn(dev, | 
|  | "%s: Tx engine still on\n", | 
|  | __func__); | 
|  | } | 
|  | rhine_tx(dev); | 
|  | } | 
|  |  | 
|  | /* Abnormal error summary/uncommon events handlers. */ | 
|  | if (intr_status & (IntrPCIErr | IntrLinkChange | | 
|  | IntrStatsMax | IntrTxError | IntrTxAborted | | 
|  | IntrTxUnderrun | IntrTxDescRace)) | 
|  | rhine_error(dev, intr_status); | 
|  |  | 
|  | if (--boguscnt < 0) { | 
|  | netdev_warn(dev, "Too much work at interrupt, status=%#08x\n", | 
|  | intr_status); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (debug > 3) | 
|  | netdev_dbg(dev, "exiting interrupt, status=%08x\n", | 
|  | ioread16(ioaddr + IntrStatus)); | 
|  | return IRQ_RETVAL(handled); | 
|  | } | 
|  |  | 
|  | /* This routine is logically part of the interrupt handler, but isolated | 
|  | for clarity. */ | 
|  | static void rhine_tx(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE; | 
|  |  | 
|  | spin_lock(&rp->lock); | 
|  |  | 
|  | /* find and cleanup dirty tx descriptors */ | 
|  | while (rp->dirty_tx != rp->cur_tx) { | 
|  | txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status); | 
|  | if (debug > 6) | 
|  | netdev_dbg(dev, "Tx scavenge %d status %08x\n", | 
|  | entry, txstatus); | 
|  | if (txstatus & DescOwn) | 
|  | break; | 
|  | if (txstatus & 0x8000) { | 
|  | if (debug > 1) | 
|  | netdev_dbg(dev, "Transmit error, Tx status %08x\n", | 
|  | txstatus); | 
|  | dev->stats.tx_errors++; | 
|  | if (txstatus & 0x0400) | 
|  | dev->stats.tx_carrier_errors++; | 
|  | if (txstatus & 0x0200) | 
|  | dev->stats.tx_window_errors++; | 
|  | if (txstatus & 0x0100) | 
|  | dev->stats.tx_aborted_errors++; | 
|  | if (txstatus & 0x0080) | 
|  | dev->stats.tx_heartbeat_errors++; | 
|  | if (((rp->quirks & rqRhineI) && txstatus & 0x0002) || | 
|  | (txstatus & 0x0800) || (txstatus & 0x1000)) { | 
|  | dev->stats.tx_fifo_errors++; | 
|  | rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn); | 
|  | break; /* Keep the skb - we try again */ | 
|  | } | 
|  | /* Transmitter restarted in 'abnormal' handler. */ | 
|  | } else { | 
|  | if (rp->quirks & rqRhineI) | 
|  | dev->stats.collisions += (txstatus >> 3) & 0x0F; | 
|  | else | 
|  | dev->stats.collisions += txstatus & 0x0F; | 
|  | if (debug > 6) | 
|  | netdev_dbg(dev, "collisions: %1.1x:%1.1x\n", | 
|  | (txstatus >> 3) & 0xF, | 
|  | txstatus & 0xF); | 
|  | dev->stats.tx_bytes += rp->tx_skbuff[entry]->len; | 
|  | dev->stats.tx_packets++; | 
|  | } | 
|  | /* Free the original skb. */ | 
|  | if (rp->tx_skbuff_dma[entry]) { | 
|  | pci_unmap_single(rp->pdev, | 
|  | rp->tx_skbuff_dma[entry], | 
|  | rp->tx_skbuff[entry]->len, | 
|  | PCI_DMA_TODEVICE); | 
|  | } | 
|  | dev_kfree_skb_irq(rp->tx_skbuff[entry]); | 
|  | rp->tx_skbuff[entry] = NULL; | 
|  | entry = (++rp->dirty_tx) % TX_RING_SIZE; | 
|  | } | 
|  | if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4) | 
|  | netif_wake_queue(dev); | 
|  |  | 
|  | spin_unlock(&rp->lock); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rhine_get_vlan_tci - extract TCI from Rx data buffer | 
|  | * @skb: pointer to sk_buff | 
|  | * @data_size: used data area of the buffer including CRC | 
|  | * | 
|  | * If hardware VLAN tag extraction is enabled and the chip indicates a 802.1Q | 
|  | * packet, the extracted 802.1Q header (2 bytes TPID + 2 bytes TCI) is 4-byte | 
|  | * aligned following the CRC. | 
|  | */ | 
|  | static inline u16 rhine_get_vlan_tci(struct sk_buff *skb, int data_size) | 
|  | { | 
|  | u8 *trailer = (u8 *)skb->data + ((data_size + 3) & ~3) + 2; | 
|  | return be16_to_cpup((__be16 *)trailer); | 
|  | } | 
|  |  | 
|  | /* Process up to limit frames from receive ring */ | 
|  | static int rhine_rx(struct net_device *dev, int limit) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | int count; | 
|  | int entry = rp->cur_rx % RX_RING_SIZE; | 
|  |  | 
|  | if (debug > 4) { | 
|  | netdev_dbg(dev, "%s(), entry %d status %08x\n", | 
|  | __func__, entry, | 
|  | le32_to_cpu(rp->rx_head_desc->rx_status)); | 
|  | } | 
|  |  | 
|  | /* If EOP is set on the next entry, it's a new packet. Send it up. */ | 
|  | for (count = 0; count < limit; ++count) { | 
|  | struct rx_desc *desc = rp->rx_head_desc; | 
|  | u32 desc_status = le32_to_cpu(desc->rx_status); | 
|  | u32 desc_length = le32_to_cpu(desc->desc_length); | 
|  | int data_size = desc_status >> 16; | 
|  |  | 
|  | if (desc_status & DescOwn) | 
|  | break; | 
|  |  | 
|  | if (debug > 4) | 
|  | netdev_dbg(dev, "%s() status is %08x\n", | 
|  | __func__, desc_status); | 
|  |  | 
|  | if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) { | 
|  | if ((desc_status & RxWholePkt) != RxWholePkt) { | 
|  | netdev_warn(dev, | 
|  | "Oversized Ethernet frame spanned multiple buffers, " | 
|  | "entry %#x length %d status %08x!\n", | 
|  | entry, data_size, | 
|  | desc_status); | 
|  | netdev_warn(dev, | 
|  | "Oversized Ethernet frame %p vs %p\n", | 
|  | rp->rx_head_desc, | 
|  | &rp->rx_ring[entry]); | 
|  | dev->stats.rx_length_errors++; | 
|  | } else if (desc_status & RxErr) { | 
|  | /* There was a error. */ | 
|  | if (debug > 2) | 
|  | netdev_dbg(dev, "%s() Rx error was %08x\n", | 
|  | __func__, desc_status); | 
|  | dev->stats.rx_errors++; | 
|  | if (desc_status & 0x0030) | 
|  | dev->stats.rx_length_errors++; | 
|  | if (desc_status & 0x0048) | 
|  | dev->stats.rx_fifo_errors++; | 
|  | if (desc_status & 0x0004) | 
|  | dev->stats.rx_frame_errors++; | 
|  | if (desc_status & 0x0002) { | 
|  | /* this can also be updated outside the interrupt handler */ | 
|  | spin_lock(&rp->lock); | 
|  | dev->stats.rx_crc_errors++; | 
|  | spin_unlock(&rp->lock); | 
|  | } | 
|  | } | 
|  | } else { | 
|  | struct sk_buff *skb = NULL; | 
|  | /* Length should omit the CRC */ | 
|  | int pkt_len = data_size - 4; | 
|  | u16 vlan_tci = 0; | 
|  |  | 
|  | /* Check if the packet is long enough to accept without | 
|  | copying to a minimally-sized skbuff. */ | 
|  | if (pkt_len < rx_copybreak) | 
|  | skb = netdev_alloc_skb_ip_align(dev, pkt_len); | 
|  | if (skb) { | 
|  | pci_dma_sync_single_for_cpu(rp->pdev, | 
|  | rp->rx_skbuff_dma[entry], | 
|  | rp->rx_buf_sz, | 
|  | PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | skb_copy_to_linear_data(skb, | 
|  | rp->rx_skbuff[entry]->data, | 
|  | pkt_len); | 
|  | skb_put(skb, pkt_len); | 
|  | pci_dma_sync_single_for_device(rp->pdev, | 
|  | rp->rx_skbuff_dma[entry], | 
|  | rp->rx_buf_sz, | 
|  | PCI_DMA_FROMDEVICE); | 
|  | } else { | 
|  | skb = rp->rx_skbuff[entry]; | 
|  | if (skb == NULL) { | 
|  | netdev_err(dev, "Inconsistent Rx descriptor chain\n"); | 
|  | break; | 
|  | } | 
|  | rp->rx_skbuff[entry] = NULL; | 
|  | skb_put(skb, pkt_len); | 
|  | pci_unmap_single(rp->pdev, | 
|  | rp->rx_skbuff_dma[entry], | 
|  | rp->rx_buf_sz, | 
|  | PCI_DMA_FROMDEVICE); | 
|  | } | 
|  |  | 
|  | if (unlikely(desc_length & DescTag)) | 
|  | vlan_tci = rhine_get_vlan_tci(skb, data_size); | 
|  |  | 
|  | skb->protocol = eth_type_trans(skb, dev); | 
|  |  | 
|  | if (unlikely(desc_length & DescTag)) | 
|  | __vlan_hwaccel_put_tag(skb, vlan_tci); | 
|  | netif_receive_skb(skb); | 
|  | dev->stats.rx_bytes += pkt_len; | 
|  | dev->stats.rx_packets++; | 
|  | } | 
|  | entry = (++rp->cur_rx) % RX_RING_SIZE; | 
|  | rp->rx_head_desc = &rp->rx_ring[entry]; | 
|  | } | 
|  |  | 
|  | /* Refill the Rx ring buffers. */ | 
|  | for (; rp->cur_rx - rp->dirty_rx > 0; rp->dirty_rx++) { | 
|  | struct sk_buff *skb; | 
|  | entry = rp->dirty_rx % RX_RING_SIZE; | 
|  | if (rp->rx_skbuff[entry] == NULL) { | 
|  | skb = netdev_alloc_skb(dev, rp->rx_buf_sz); | 
|  | rp->rx_skbuff[entry] = skb; | 
|  | if (skb == NULL) | 
|  | break;	/* Better luck next round. */ | 
|  | skb->dev = dev;	/* Mark as being used by this device. */ | 
|  | rp->rx_skbuff_dma[entry] = | 
|  | pci_map_single(rp->pdev, skb->data, | 
|  | rp->rx_buf_sz, | 
|  | PCI_DMA_FROMDEVICE); | 
|  | rp->rx_ring[entry].addr = cpu_to_le32(rp->rx_skbuff_dma[entry]); | 
|  | } | 
|  | rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn); | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Clears the "tally counters" for CRC errors and missed frames(?). | 
|  | * It has been reported that some chips need a write of 0 to clear | 
|  | * these, for others the counters are set to 1 when written to and | 
|  | * instead cleared when read. So we clear them both ways ... | 
|  | */ | 
|  | static inline void clear_tally_counters(void __iomem *ioaddr) | 
|  | { | 
|  | iowrite32(0, ioaddr + RxMissed); | 
|  | ioread16(ioaddr + RxCRCErrs); | 
|  | ioread16(ioaddr + RxMissed); | 
|  | } | 
|  |  | 
|  | static void rhine_restart_tx(struct net_device *dev) { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  | int entry = rp->dirty_tx % TX_RING_SIZE; | 
|  | u32 intr_status; | 
|  |  | 
|  | /* | 
|  | * If new errors occurred, we need to sort them out before doing Tx. | 
|  | * In that case the ISR will be back here RSN anyway. | 
|  | */ | 
|  | intr_status = get_intr_status(dev); | 
|  |  | 
|  | if ((intr_status & IntrTxErrSummary) == 0) { | 
|  |  | 
|  | /* We know better than the chip where it should continue. */ | 
|  | iowrite32(rp->tx_ring_dma + entry * sizeof(struct tx_desc), | 
|  | ioaddr + TxRingPtr); | 
|  |  | 
|  | iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn, | 
|  | ioaddr + ChipCmd); | 
|  |  | 
|  | if (rp->tx_ring[entry].desc_length & cpu_to_le32(0x020000)) | 
|  | /* Tx queues are bits 7-0 (first Tx queue: bit 7) */ | 
|  | BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake); | 
|  |  | 
|  | iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand, | 
|  | ioaddr + ChipCmd1); | 
|  | IOSYNC; | 
|  | } | 
|  | else { | 
|  | /* This should never happen */ | 
|  | if (debug > 1) | 
|  | netdev_warn(dev, "%s() Another error occurred %08x\n", | 
|  | __func__, intr_status); | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | static void rhine_error(struct net_device *dev, int intr_status) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  |  | 
|  | spin_lock(&rp->lock); | 
|  |  | 
|  | if (intr_status & IntrLinkChange) | 
|  | rhine_check_media(dev, 0); | 
|  | if (intr_status & IntrStatsMax) { | 
|  | dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs); | 
|  | dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed); | 
|  | clear_tally_counters(ioaddr); | 
|  | } | 
|  | if (intr_status & IntrTxAborted) { | 
|  | if (debug > 1) | 
|  | netdev_info(dev, "Abort %08x, frame dropped\n", | 
|  | intr_status); | 
|  | } | 
|  | if (intr_status & IntrTxUnderrun) { | 
|  | if (rp->tx_thresh < 0xE0) | 
|  | BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig); | 
|  | if (debug > 1) | 
|  | netdev_info(dev, "Transmitter underrun, Tx threshold now %02x\n", | 
|  | rp->tx_thresh); | 
|  | } | 
|  | if (intr_status & IntrTxDescRace) { | 
|  | if (debug > 2) | 
|  | netdev_info(dev, "Tx descriptor write-back race\n"); | 
|  | } | 
|  | if ((intr_status & IntrTxError) && | 
|  | (intr_status & (IntrTxAborted | | 
|  | IntrTxUnderrun | IntrTxDescRace)) == 0) { | 
|  | if (rp->tx_thresh < 0xE0) { | 
|  | BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig); | 
|  | } | 
|  | if (debug > 1) | 
|  | netdev_info(dev, "Unspecified error. Tx threshold now %02x\n", | 
|  | rp->tx_thresh); | 
|  | } | 
|  | if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace | | 
|  | IntrTxError)) | 
|  | rhine_restart_tx(dev); | 
|  |  | 
|  | if (intr_status & ~(IntrLinkChange | IntrStatsMax | IntrTxUnderrun | | 
|  | IntrTxError | IntrTxAborted | IntrNormalSummary | | 
|  | IntrTxDescRace)) { | 
|  | if (debug > 1) | 
|  | netdev_err(dev, "Something Wicked happened! %08x\n", | 
|  | intr_status); | 
|  | } | 
|  |  | 
|  | spin_unlock(&rp->lock); | 
|  | } | 
|  |  | 
|  | static struct net_device_stats *rhine_get_stats(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&rp->lock, flags); | 
|  | dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs); | 
|  | dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed); | 
|  | clear_tally_counters(ioaddr); | 
|  | spin_unlock_irqrestore(&rp->lock, flags); | 
|  |  | 
|  | return &dev->stats; | 
|  | } | 
|  |  | 
|  | static void rhine_set_rx_mode(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  | u32 mc_filter[2];	/* Multicast hash filter */ | 
|  | u8 rx_mode = 0x0C;	/* Note: 0x02=accept runt, 0x01=accept errs */ | 
|  | struct netdev_hw_addr *ha; | 
|  |  | 
|  | if (dev->flags & IFF_PROMISC) {		/* Set promiscuous. */ | 
|  | rx_mode = 0x1C; | 
|  | iowrite32(0xffffffff, ioaddr + MulticastFilter0); | 
|  | iowrite32(0xffffffff, ioaddr + MulticastFilter1); | 
|  | } else if ((netdev_mc_count(dev) > multicast_filter_limit) || | 
|  | (dev->flags & IFF_ALLMULTI)) { | 
|  | /* Too many to match, or accept all multicasts. */ | 
|  | iowrite32(0xffffffff, ioaddr + MulticastFilter0); | 
|  | iowrite32(0xffffffff, ioaddr + MulticastFilter1); | 
|  | } else if (rp->pdev->revision >= VT6105M) { | 
|  | int i = 0; | 
|  | u32 mCAMmask = 0;	/* 32 mCAMs (6105M and better) */ | 
|  | netdev_for_each_mc_addr(ha, dev) { | 
|  | if (i == MCAM_SIZE) | 
|  | break; | 
|  | rhine_set_cam(ioaddr, i, ha->addr); | 
|  | mCAMmask |= 1 << i; | 
|  | i++; | 
|  | } | 
|  | rhine_set_cam_mask(ioaddr, mCAMmask); | 
|  | } else { | 
|  | memset(mc_filter, 0, sizeof(mc_filter)); | 
|  | netdev_for_each_mc_addr(ha, dev) { | 
|  | int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; | 
|  |  | 
|  | mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); | 
|  | } | 
|  | iowrite32(mc_filter[0], ioaddr + MulticastFilter0); | 
|  | iowrite32(mc_filter[1], ioaddr + MulticastFilter1); | 
|  | } | 
|  | /* enable/disable VLAN receive filtering */ | 
|  | if (rp->pdev->revision >= VT6105M) { | 
|  | if (dev->flags & IFF_PROMISC) | 
|  | BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1); | 
|  | else | 
|  | BYTE_REG_BITS_ON(BCR1_VIDFR, ioaddr + PCIBusConfig1); | 
|  | } | 
|  | BYTE_REG_BITS_ON(rx_mode, ioaddr + RxConfig); | 
|  | } | 
|  |  | 
|  | static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  |  | 
|  | strcpy(info->driver, DRV_NAME); | 
|  | strcpy(info->version, DRV_VERSION); | 
|  | strcpy(info->bus_info, pci_name(rp->pdev)); | 
|  | } | 
|  |  | 
|  | static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | int rc; | 
|  |  | 
|  | spin_lock_irq(&rp->lock); | 
|  | rc = mii_ethtool_gset(&rp->mii_if, cmd); | 
|  | spin_unlock_irq(&rp->lock); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | int rc; | 
|  |  | 
|  | spin_lock_irq(&rp->lock); | 
|  | rc = mii_ethtool_sset(&rp->mii_if, cmd); | 
|  | spin_unlock_irq(&rp->lock); | 
|  | rhine_set_carrier(&rp->mii_if); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int netdev_nway_reset(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  |  | 
|  | return mii_nway_restart(&rp->mii_if); | 
|  | } | 
|  |  | 
|  | static u32 netdev_get_link(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  |  | 
|  | return mii_link_ok(&rp->mii_if); | 
|  | } | 
|  |  | 
|  | static u32 netdev_get_msglevel(struct net_device *dev) | 
|  | { | 
|  | return debug; | 
|  | } | 
|  |  | 
|  | static void netdev_set_msglevel(struct net_device *dev, u32 value) | 
|  | { | 
|  | debug = value; | 
|  | } | 
|  |  | 
|  | static void rhine_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  |  | 
|  | if (!(rp->quirks & rqWOL)) | 
|  | return; | 
|  |  | 
|  | spin_lock_irq(&rp->lock); | 
|  | wol->supported = WAKE_PHY | WAKE_MAGIC | | 
|  | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;	/* Untested */ | 
|  | wol->wolopts = rp->wolopts; | 
|  | spin_unlock_irq(&rp->lock); | 
|  | } | 
|  |  | 
|  | static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | u32 support = WAKE_PHY | WAKE_MAGIC | | 
|  | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;	/* Untested */ | 
|  |  | 
|  | if (!(rp->quirks & rqWOL)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (wol->wolopts & ~support) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irq(&rp->lock); | 
|  | rp->wolopts = wol->wolopts; | 
|  | spin_unlock_irq(&rp->lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct ethtool_ops netdev_ethtool_ops = { | 
|  | .get_drvinfo		= netdev_get_drvinfo, | 
|  | .get_settings		= netdev_get_settings, | 
|  | .set_settings		= netdev_set_settings, | 
|  | .nway_reset		= netdev_nway_reset, | 
|  | .get_link		= netdev_get_link, | 
|  | .get_msglevel		= netdev_get_msglevel, | 
|  | .set_msglevel		= netdev_set_msglevel, | 
|  | .get_wol		= rhine_get_wol, | 
|  | .set_wol		= rhine_set_wol, | 
|  | }; | 
|  |  | 
|  | static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | int rc; | 
|  |  | 
|  | if (!netif_running(dev)) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irq(&rp->lock); | 
|  | rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL); | 
|  | spin_unlock_irq(&rp->lock); | 
|  | rhine_set_carrier(&rp->mii_if); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int rhine_close(struct net_device *dev) | 
|  | { | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  |  | 
|  | napi_disable(&rp->napi); | 
|  | cancel_work_sync(&rp->reset_task); | 
|  | netif_stop_queue(dev); | 
|  |  | 
|  | spin_lock_irq(&rp->lock); | 
|  |  | 
|  | if (debug > 1) | 
|  | netdev_dbg(dev, "Shutting down ethercard, status was %04x\n", | 
|  | ioread16(ioaddr + ChipCmd)); | 
|  |  | 
|  | /* Switch to loopback mode to avoid hardware races. */ | 
|  | iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig); | 
|  |  | 
|  | /* Disable interrupts by clearing the interrupt mask. */ | 
|  | iowrite16(0x0000, ioaddr + IntrEnable); | 
|  |  | 
|  | /* Stop the chip's Tx and Rx processes. */ | 
|  | iowrite16(CmdStop, ioaddr + ChipCmd); | 
|  |  | 
|  | spin_unlock_irq(&rp->lock); | 
|  |  | 
|  | free_irq(rp->pdev->irq, dev); | 
|  | free_rbufs(dev); | 
|  | free_tbufs(dev); | 
|  | free_ring(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __devexit rhine_remove_one(struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *dev = pci_get_drvdata(pdev); | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  |  | 
|  | unregister_netdev(dev); | 
|  |  | 
|  | pci_iounmap(pdev, rp->base); | 
|  | pci_release_regions(pdev); | 
|  |  | 
|  | free_netdev(dev); | 
|  | pci_disable_device(pdev); | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | } | 
|  |  | 
|  | static void rhine_shutdown (struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *dev = pci_get_drvdata(pdev); | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | void __iomem *ioaddr = rp->base; | 
|  |  | 
|  | if (!(rp->quirks & rqWOL)) | 
|  | return; /* Nothing to do for non-WOL adapters */ | 
|  |  | 
|  | rhine_power_init(dev); | 
|  |  | 
|  | /* Make sure we use pattern 0, 1 and not 4, 5 */ | 
|  | if (rp->quirks & rq6patterns) | 
|  | iowrite8(0x04, ioaddr + WOLcgClr); | 
|  |  | 
|  | if (rp->wolopts & WAKE_MAGIC) { | 
|  | iowrite8(WOLmagic, ioaddr + WOLcrSet); | 
|  | /* | 
|  | * Turn EEPROM-controlled wake-up back on -- some hardware may | 
|  | * not cooperate otherwise. | 
|  | */ | 
|  | iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA); | 
|  | } | 
|  |  | 
|  | if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST)) | 
|  | iowrite8(WOLbmcast, ioaddr + WOLcgSet); | 
|  |  | 
|  | if (rp->wolopts & WAKE_PHY) | 
|  | iowrite8(WOLlnkon | WOLlnkoff, ioaddr + WOLcrSet); | 
|  |  | 
|  | if (rp->wolopts & WAKE_UCAST) | 
|  | iowrite8(WOLucast, ioaddr + WOLcrSet); | 
|  |  | 
|  | if (rp->wolopts) { | 
|  | /* Enable legacy WOL (for old motherboards) */ | 
|  | iowrite8(0x01, ioaddr + PwcfgSet); | 
|  | iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW); | 
|  | } | 
|  |  | 
|  | /* Hit power state D3 (sleep) */ | 
|  | if (!avoid_D3) | 
|  | iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW); | 
|  |  | 
|  | /* TODO: Check use of pci_enable_wake() */ | 
|  |  | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int rhine_suspend(struct pci_dev *pdev, pm_message_t state) | 
|  | { | 
|  | struct net_device *dev = pci_get_drvdata(pdev); | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!netif_running(dev)) | 
|  | return 0; | 
|  |  | 
|  | napi_disable(&rp->napi); | 
|  |  | 
|  | netif_device_detach(dev); | 
|  | pci_save_state(pdev); | 
|  |  | 
|  | spin_lock_irqsave(&rp->lock, flags); | 
|  | rhine_shutdown(pdev); | 
|  | spin_unlock_irqrestore(&rp->lock, flags); | 
|  |  | 
|  | free_irq(dev->irq, dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rhine_resume(struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *dev = pci_get_drvdata(pdev); | 
|  | struct rhine_private *rp = netdev_priv(dev); | 
|  | unsigned long flags; | 
|  | int ret; | 
|  |  | 
|  | if (!netif_running(dev)) | 
|  | return 0; | 
|  |  | 
|  | if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev)) | 
|  | netdev_err(dev, "request_irq failed\n"); | 
|  |  | 
|  | ret = pci_set_power_state(pdev, PCI_D0); | 
|  | if (debug > 1) | 
|  | netdev_info(dev, "Entering power state D0 %s (%d)\n", | 
|  | ret ? "failed" : "succeeded", ret); | 
|  |  | 
|  | pci_restore_state(pdev); | 
|  |  | 
|  | spin_lock_irqsave(&rp->lock, flags); | 
|  | #ifdef USE_MMIO | 
|  | enable_mmio(rp->pioaddr, rp->quirks); | 
|  | #endif | 
|  | rhine_power_init(dev); | 
|  | free_tbufs(dev); | 
|  | free_rbufs(dev); | 
|  | alloc_tbufs(dev); | 
|  | alloc_rbufs(dev); | 
|  | init_registers(dev); | 
|  | spin_unlock_irqrestore(&rp->lock, flags); | 
|  |  | 
|  | netif_device_attach(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif /* CONFIG_PM */ | 
|  |  | 
|  | static struct pci_driver rhine_driver = { | 
|  | .name		= DRV_NAME, | 
|  | .id_table	= rhine_pci_tbl, | 
|  | .probe		= rhine_init_one, | 
|  | .remove		= __devexit_p(rhine_remove_one), | 
|  | #ifdef CONFIG_PM | 
|  | .suspend	= rhine_suspend, | 
|  | .resume		= rhine_resume, | 
|  | #endif /* CONFIG_PM */ | 
|  | .shutdown =	rhine_shutdown, | 
|  | }; | 
|  |  | 
|  | static struct dmi_system_id __initdata rhine_dmi_table[] = { | 
|  | { | 
|  | .ident = "EPIA-M", | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."), | 
|  | DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"), | 
|  | }, | 
|  | }, | 
|  | { | 
|  | .ident = "KV7", | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), | 
|  | DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"), | 
|  | }, | 
|  | }, | 
|  | { NULL } | 
|  | }; | 
|  |  | 
|  | static int __init rhine_init(void) | 
|  | { | 
|  | /* when a module, this is printed whether or not devices are found in probe */ | 
|  | #ifdef MODULE | 
|  | pr_info("%s\n", version); | 
|  | #endif | 
|  | if (dmi_check_system(rhine_dmi_table)) { | 
|  | /* these BIOSes fail at PXE boot if chip is in D3 */ | 
|  | avoid_D3 = 1; | 
|  | pr_warn("Broken BIOS detected, avoid_D3 enabled\n"); | 
|  | } | 
|  | else if (avoid_D3) | 
|  | pr_info("avoid_D3 set\n"); | 
|  |  | 
|  | return pci_register_driver(&rhine_driver); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __exit rhine_cleanup(void) | 
|  | { | 
|  | pci_unregister_driver(&rhine_driver); | 
|  | } | 
|  |  | 
|  |  | 
|  | module_init(rhine_init); | 
|  | module_exit(rhine_cleanup); |