|  | /* | 
|  | * Renesas SH-mobile MIPI DSI support | 
|  | * | 
|  | * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de> | 
|  | * | 
|  | * This is free software; you can redistribute it and/or modify | 
|  | * it under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/types.h> | 
|  |  | 
|  | #include <video/mipi_display.h> | 
|  | #include <video/sh_mipi_dsi.h> | 
|  | #include <video/sh_mobile_lcdc.h> | 
|  |  | 
|  | #define SYSCTRL		0x0000 | 
|  | #define SYSCONF		0x0004 | 
|  | #define TIMSET		0x0008 | 
|  | #define RESREQSET0	0x0018 | 
|  | #define RESREQSET1	0x001c | 
|  | #define HSTTOVSET	0x0020 | 
|  | #define LPRTOVSET	0x0024 | 
|  | #define TATOVSET	0x0028 | 
|  | #define PRTOVSET	0x002c | 
|  | #define DSICTRL		0x0030 | 
|  | #define DSIINTE		0x0060 | 
|  | #define PHYCTRL		0x0070 | 
|  |  | 
|  | /* relative to linkbase */ | 
|  | #define DTCTR		0x0000 | 
|  | #define VMCTR1		0x0020 | 
|  | #define VMCTR2		0x0024 | 
|  | #define VMLEN1		0x0028 | 
|  | #define CMTSRTREQ	0x0070 | 
|  | #define CMTSRTCTR	0x00d0 | 
|  |  | 
|  | /* E.g., sh7372 has 2 MIPI-DSIs - one for each LCDC */ | 
|  | #define MAX_SH_MIPI_DSI 2 | 
|  |  | 
|  | struct sh_mipi { | 
|  | void __iomem	*base; | 
|  | void __iomem	*linkbase; | 
|  | struct clk	*dsit_clk; | 
|  | struct clk	*dsip_clk; | 
|  | struct device	*dev; | 
|  |  | 
|  | void	*next_board_data; | 
|  | void	(*next_display_on)(void *board_data, struct fb_info *info); | 
|  | void	(*next_display_off)(void *board_data); | 
|  | }; | 
|  |  | 
|  | static struct sh_mipi *mipi_dsi[MAX_SH_MIPI_DSI]; | 
|  |  | 
|  | /* Protect the above array */ | 
|  | static DEFINE_MUTEX(array_lock); | 
|  |  | 
|  | static struct sh_mipi *sh_mipi_by_handle(int handle) | 
|  | { | 
|  | if (handle >= ARRAY_SIZE(mipi_dsi) || handle < 0) | 
|  | return NULL; | 
|  |  | 
|  | return mipi_dsi[handle]; | 
|  | } | 
|  |  | 
|  | static int sh_mipi_send_short(struct sh_mipi *mipi, u8 dsi_cmd, | 
|  | u8 cmd, u8 param) | 
|  | { | 
|  | u32 data = (dsi_cmd << 24) | (cmd << 16) | (param << 8); | 
|  | int cnt = 100; | 
|  |  | 
|  | /* transmit a short packet to LCD panel */ | 
|  | iowrite32(1 | data, mipi->linkbase + CMTSRTCTR); | 
|  | iowrite32(1, mipi->linkbase + CMTSRTREQ); | 
|  |  | 
|  | while ((ioread32(mipi->linkbase + CMTSRTREQ) & 1) && --cnt) | 
|  | udelay(1); | 
|  |  | 
|  | return cnt ? 0 : -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | #define LCD_CHAN2MIPI(c) ((c) < LCDC_CHAN_MAINLCD || (c) > LCDC_CHAN_SUBLCD ? \ | 
|  | -EINVAL : (c) - 1) | 
|  |  | 
|  | static int sh_mipi_dcs(int handle, u8 cmd) | 
|  | { | 
|  | struct sh_mipi *mipi = sh_mipi_by_handle(LCD_CHAN2MIPI(handle)); | 
|  | if (!mipi) | 
|  | return -ENODEV; | 
|  | return sh_mipi_send_short(mipi, MIPI_DSI_DCS_SHORT_WRITE, cmd, 0); | 
|  | } | 
|  |  | 
|  | static int sh_mipi_dcs_param(int handle, u8 cmd, u8 param) | 
|  | { | 
|  | struct sh_mipi *mipi = sh_mipi_by_handle(LCD_CHAN2MIPI(handle)); | 
|  | if (!mipi) | 
|  | return -ENODEV; | 
|  | return sh_mipi_send_short(mipi, MIPI_DSI_DCS_SHORT_WRITE_PARAM, cmd, | 
|  | param); | 
|  | } | 
|  |  | 
|  | static void sh_mipi_dsi_enable(struct sh_mipi *mipi, bool enable) | 
|  | { | 
|  | /* | 
|  | * enable LCDC data tx, transition to LPS after completion of each HS | 
|  | * packet | 
|  | */ | 
|  | iowrite32(0x00000002 | enable, mipi->linkbase + DTCTR); | 
|  | } | 
|  |  | 
|  | static void sh_mipi_shutdown(struct platform_device *pdev) | 
|  | { | 
|  | struct sh_mipi *mipi = platform_get_drvdata(pdev); | 
|  |  | 
|  | sh_mipi_dsi_enable(mipi, false); | 
|  | } | 
|  |  | 
|  | static void mipi_display_on(void *arg, struct fb_info *info) | 
|  | { | 
|  | struct sh_mipi *mipi = arg; | 
|  |  | 
|  | pm_runtime_get_sync(mipi->dev); | 
|  | sh_mipi_dsi_enable(mipi, true); | 
|  |  | 
|  | if (mipi->next_display_on) | 
|  | mipi->next_display_on(mipi->next_board_data, info); | 
|  | } | 
|  |  | 
|  | static void mipi_display_off(void *arg) | 
|  | { | 
|  | struct sh_mipi *mipi = arg; | 
|  |  | 
|  | if (mipi->next_display_off) | 
|  | mipi->next_display_off(mipi->next_board_data); | 
|  |  | 
|  | sh_mipi_dsi_enable(mipi, false); | 
|  | pm_runtime_put(mipi->dev); | 
|  | } | 
|  |  | 
|  | static int __init sh_mipi_setup(struct sh_mipi *mipi, | 
|  | struct sh_mipi_dsi_info *pdata) | 
|  | { | 
|  | void __iomem *base = mipi->base; | 
|  | struct sh_mobile_lcdc_chan_cfg *ch = pdata->lcd_chan; | 
|  | u32 pctype, datatype, pixfmt, linelength, vmctr2 = 0x00e00000; | 
|  | bool yuv; | 
|  |  | 
|  | /* | 
|  | * Select data format. MIPI DSI is not hot-pluggable, so, we just use | 
|  | * the default videomode. If this ever becomes a problem, We'll have to | 
|  | * move this to mipi_display_on() above and use info->var.xres | 
|  | */ | 
|  | switch (pdata->data_format) { | 
|  | case MIPI_RGB888: | 
|  | pctype = 0; | 
|  | datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24; | 
|  | pixfmt = MIPI_DCS_PIXEL_FMT_24BIT; | 
|  | linelength = ch->lcd_cfg[0].xres * 3; | 
|  | yuv = false; | 
|  | break; | 
|  | case MIPI_RGB565: | 
|  | pctype = 1; | 
|  | datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16; | 
|  | pixfmt = MIPI_DCS_PIXEL_FMT_16BIT; | 
|  | linelength = ch->lcd_cfg[0].xres * 2; | 
|  | yuv = false; | 
|  | break; | 
|  | case MIPI_RGB666_LP: | 
|  | pctype = 2; | 
|  | datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18; | 
|  | pixfmt = MIPI_DCS_PIXEL_FMT_24BIT; | 
|  | linelength = ch->lcd_cfg[0].xres * 3; | 
|  | yuv = false; | 
|  | break; | 
|  | case MIPI_RGB666: | 
|  | pctype = 3; | 
|  | datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18; | 
|  | pixfmt = MIPI_DCS_PIXEL_FMT_18BIT; | 
|  | linelength = (ch->lcd_cfg[0].xres * 18 + 7) / 8; | 
|  | yuv = false; | 
|  | break; | 
|  | case MIPI_BGR888: | 
|  | pctype = 8; | 
|  | datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24; | 
|  | pixfmt = MIPI_DCS_PIXEL_FMT_24BIT; | 
|  | linelength = ch->lcd_cfg[0].xres * 3; | 
|  | yuv = false; | 
|  | break; | 
|  | case MIPI_BGR565: | 
|  | pctype = 9; | 
|  | datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16; | 
|  | pixfmt = MIPI_DCS_PIXEL_FMT_16BIT; | 
|  | linelength = ch->lcd_cfg[0].xres * 2; | 
|  | yuv = false; | 
|  | break; | 
|  | case MIPI_BGR666_LP: | 
|  | pctype = 0xa; | 
|  | datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18; | 
|  | pixfmt = MIPI_DCS_PIXEL_FMT_24BIT; | 
|  | linelength = ch->lcd_cfg[0].xres * 3; | 
|  | yuv = false; | 
|  | break; | 
|  | case MIPI_BGR666: | 
|  | pctype = 0xb; | 
|  | datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18; | 
|  | pixfmt = MIPI_DCS_PIXEL_FMT_18BIT; | 
|  | linelength = (ch->lcd_cfg[0].xres * 18 + 7) / 8; | 
|  | yuv = false; | 
|  | break; | 
|  | case MIPI_YUYV: | 
|  | pctype = 4; | 
|  | datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16; | 
|  | pixfmt = MIPI_DCS_PIXEL_FMT_16BIT; | 
|  | linelength = ch->lcd_cfg[0].xres * 2; | 
|  | yuv = true; | 
|  | break; | 
|  | case MIPI_UYVY: | 
|  | pctype = 5; | 
|  | datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16; | 
|  | pixfmt = MIPI_DCS_PIXEL_FMT_16BIT; | 
|  | linelength = ch->lcd_cfg[0].xres * 2; | 
|  | yuv = true; | 
|  | break; | 
|  | case MIPI_YUV420_L: | 
|  | pctype = 6; | 
|  | datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12; | 
|  | pixfmt = MIPI_DCS_PIXEL_FMT_12BIT; | 
|  | linelength = (ch->lcd_cfg[0].xres * 12 + 7) / 8; | 
|  | yuv = true; | 
|  | break; | 
|  | case MIPI_YUV420: | 
|  | pctype = 7; | 
|  | datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12; | 
|  | pixfmt = MIPI_DCS_PIXEL_FMT_12BIT; | 
|  | /* Length of U/V line */ | 
|  | linelength = (ch->lcd_cfg[0].xres + 1) / 2; | 
|  | yuv = true; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if ((yuv && ch->interface_type != YUV422) || | 
|  | (!yuv && ch->interface_type != RGB24)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* reset DSI link */ | 
|  | iowrite32(0x00000001, base + SYSCTRL); | 
|  | /* Hold reset for 100 cycles of the slowest of bus, HS byte and LP clock */ | 
|  | udelay(50); | 
|  | iowrite32(0x00000000, base + SYSCTRL); | 
|  |  | 
|  | /* setup DSI link */ | 
|  |  | 
|  | /* | 
|  | * Default = ULPS enable | | 
|  | *	Contention detection enabled | | 
|  | *	EoT packet transmission enable | | 
|  | *	CRC check enable | | 
|  | *	ECC check enable | 
|  | * additionally enable first two lanes | 
|  | */ | 
|  | iowrite32(0x00003703, base + SYSCONF); | 
|  | /* | 
|  | * T_wakeup = 0x7000 | 
|  | * T_hs-trail = 3 | 
|  | * T_hs-prepare = 3 | 
|  | * T_clk-trail = 3 | 
|  | * T_clk-prepare = 2 | 
|  | */ | 
|  | iowrite32(0x70003332, base + TIMSET); | 
|  | /* no responses requested */ | 
|  | iowrite32(0x00000000, base + RESREQSET0); | 
|  | /* request response to packets of type 0x28 */ | 
|  | iowrite32(0x00000100, base + RESREQSET1); | 
|  | /* High-speed transmission timeout, default 0xffffffff */ | 
|  | iowrite32(0x0fffffff, base + HSTTOVSET); | 
|  | /* LP reception timeout, default 0xffffffff */ | 
|  | iowrite32(0x0fffffff, base + LPRTOVSET); | 
|  | /* Turn-around timeout, default 0xffffffff */ | 
|  | iowrite32(0x0fffffff, base + TATOVSET); | 
|  | /* Peripheral reset timeout, default 0xffffffff */ | 
|  | iowrite32(0x0fffffff, base + PRTOVSET); | 
|  | /* Enable timeout counters */ | 
|  | iowrite32(0x00000f00, base + DSICTRL); | 
|  | /* Interrupts not used, disable all */ | 
|  | iowrite32(0, base + DSIINTE); | 
|  | /* DSI-Tx bias on */ | 
|  | iowrite32(0x00000001, base + PHYCTRL); | 
|  | udelay(200); | 
|  | /* Deassert resets, power on, set multiplier */ | 
|  | iowrite32(0x03070b01, base + PHYCTRL); | 
|  |  | 
|  | /* setup l-bridge */ | 
|  |  | 
|  | /* | 
|  | * Enable transmission of all packets, | 
|  | * transmit LPS after each HS packet completion | 
|  | */ | 
|  | iowrite32(0x00000006, mipi->linkbase + DTCTR); | 
|  | /* VSYNC width = 2 (<< 17) */ | 
|  | iowrite32((ch->lcd_cfg[0].vsync_len << pdata->vsynw_offset) | | 
|  | (pdata->clksrc << 16) | (pctype << 12) | datatype, | 
|  | mipi->linkbase + VMCTR1); | 
|  |  | 
|  | /* | 
|  | * Non-burst mode with sync pulses: VSE and HSE are output, | 
|  | * HSA period allowed, no commands in LP | 
|  | */ | 
|  | if (pdata->flags & SH_MIPI_DSI_HSABM) | 
|  | vmctr2 |= 0x20; | 
|  | if (pdata->flags & SH_MIPI_DSI_HSPBM) | 
|  | vmctr2 |= 0x10; | 
|  | iowrite32(vmctr2, mipi->linkbase + VMCTR2); | 
|  |  | 
|  | /* | 
|  | * 0x660 = 1632 bytes per line (RGB24, 544 pixels: see | 
|  | * sh_mobile_lcdc_info.ch[0].lcd_cfg[0].xres), HSALEN = 1 - default | 
|  | * (unused if VMCTR2[HSABM] = 0) | 
|  | */ | 
|  | iowrite32(1 | (linelength << 16), mipi->linkbase + VMLEN1); | 
|  |  | 
|  | msleep(5); | 
|  |  | 
|  | /* setup LCD panel */ | 
|  |  | 
|  | /* cf. drivers/video/omap/lcd_mipid.c */ | 
|  | sh_mipi_dcs(ch->chan, MIPI_DCS_EXIT_SLEEP_MODE); | 
|  | msleep(120); | 
|  | /* | 
|  | * [7] - Page Address Mode | 
|  | * [6] - Column Address Mode | 
|  | * [5] - Page / Column Address Mode | 
|  | * [4] - Display Device Line Refresh Order | 
|  | * [3] - RGB/BGR Order | 
|  | * [2] - Display Data Latch Data Order | 
|  | * [1] - Flip Horizontal | 
|  | * [0] - Flip Vertical | 
|  | */ | 
|  | sh_mipi_dcs_param(ch->chan, MIPI_DCS_SET_ADDRESS_MODE, 0x00); | 
|  | /* cf. set_data_lines() */ | 
|  | sh_mipi_dcs_param(ch->chan, MIPI_DCS_SET_PIXEL_FORMAT, | 
|  | pixfmt << 4); | 
|  | sh_mipi_dcs(ch->chan, MIPI_DCS_SET_DISPLAY_ON); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init sh_mipi_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct sh_mipi *mipi; | 
|  | struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data; | 
|  | struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | struct resource *res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1); | 
|  | unsigned long rate, f_current; | 
|  | int idx = pdev->id, ret; | 
|  | char dsip_clk[] = "dsi.p_clk"; | 
|  |  | 
|  | if (!res || !res2 || idx >= ARRAY_SIZE(mipi_dsi) || !pdata) | 
|  | return -ENODEV; | 
|  |  | 
|  | mutex_lock(&array_lock); | 
|  | if (idx < 0) | 
|  | for (idx = 0; idx < ARRAY_SIZE(mipi_dsi) && mipi_dsi[idx]; idx++) | 
|  | ; | 
|  |  | 
|  | if (idx == ARRAY_SIZE(mipi_dsi)) { | 
|  | ret = -EBUSY; | 
|  | goto efindslot; | 
|  | } | 
|  |  | 
|  | mipi = kzalloc(sizeof(*mipi), GFP_KERNEL); | 
|  | if (!mipi) { | 
|  | ret = -ENOMEM; | 
|  | goto ealloc; | 
|  | } | 
|  |  | 
|  | if (!request_mem_region(res->start, resource_size(res), pdev->name)) { | 
|  | dev_err(&pdev->dev, "MIPI register region already claimed\n"); | 
|  | ret = -EBUSY; | 
|  | goto ereqreg; | 
|  | } | 
|  |  | 
|  | mipi->base = ioremap(res->start, resource_size(res)); | 
|  | if (!mipi->base) { | 
|  | ret = -ENOMEM; | 
|  | goto emap; | 
|  | } | 
|  |  | 
|  | if (!request_mem_region(res2->start, resource_size(res2), pdev->name)) { | 
|  | dev_err(&pdev->dev, "MIPI register region 2 already claimed\n"); | 
|  | ret = -EBUSY; | 
|  | goto ereqreg2; | 
|  | } | 
|  |  | 
|  | mipi->linkbase = ioremap(res2->start, resource_size(res2)); | 
|  | if (!mipi->linkbase) { | 
|  | ret = -ENOMEM; | 
|  | goto emap2; | 
|  | } | 
|  |  | 
|  | mipi->dev = &pdev->dev; | 
|  |  | 
|  | mipi->dsit_clk = clk_get(&pdev->dev, "dsit_clk"); | 
|  | if (IS_ERR(mipi->dsit_clk)) { | 
|  | ret = PTR_ERR(mipi->dsit_clk); | 
|  | goto eclktget; | 
|  | } | 
|  |  | 
|  | f_current = clk_get_rate(mipi->dsit_clk); | 
|  | /* 80MHz required by the datasheet */ | 
|  | rate = clk_round_rate(mipi->dsit_clk, 80000000); | 
|  | if (rate > 0 && rate != f_current) | 
|  | ret = clk_set_rate(mipi->dsit_clk, rate); | 
|  | else | 
|  | ret = rate; | 
|  | if (ret < 0) | 
|  | goto esettrate; | 
|  |  | 
|  | dev_dbg(&pdev->dev, "DSI-T clk %lu -> %lu\n", f_current, rate); | 
|  |  | 
|  | sprintf(dsip_clk, "dsi%1.1dp_clk", idx); | 
|  | mipi->dsip_clk = clk_get(&pdev->dev, dsip_clk); | 
|  | if (IS_ERR(mipi->dsip_clk)) { | 
|  | ret = PTR_ERR(mipi->dsip_clk); | 
|  | goto eclkpget; | 
|  | } | 
|  |  | 
|  | f_current = clk_get_rate(mipi->dsip_clk); | 
|  | /* Between 10 and 50MHz */ | 
|  | rate = clk_round_rate(mipi->dsip_clk, 24000000); | 
|  | if (rate > 0 && rate != f_current) | 
|  | ret = clk_set_rate(mipi->dsip_clk, rate); | 
|  | else | 
|  | ret = rate; | 
|  | if (ret < 0) | 
|  | goto esetprate; | 
|  |  | 
|  | dev_dbg(&pdev->dev, "DSI-P clk %lu -> %lu\n", f_current, rate); | 
|  |  | 
|  | msleep(10); | 
|  |  | 
|  | ret = clk_enable(mipi->dsit_clk); | 
|  | if (ret < 0) | 
|  | goto eclkton; | 
|  |  | 
|  | ret = clk_enable(mipi->dsip_clk); | 
|  | if (ret < 0) | 
|  | goto eclkpon; | 
|  |  | 
|  | mipi_dsi[idx] = mipi; | 
|  |  | 
|  | pm_runtime_enable(&pdev->dev); | 
|  | pm_runtime_resume(&pdev->dev); | 
|  |  | 
|  | ret = sh_mipi_setup(mipi, pdata); | 
|  | if (ret < 0) | 
|  | goto emipisetup; | 
|  |  | 
|  | mutex_unlock(&array_lock); | 
|  | platform_set_drvdata(pdev, mipi); | 
|  |  | 
|  | /* Save original LCDC callbacks */ | 
|  | mipi->next_board_data = pdata->lcd_chan->board_cfg.board_data; | 
|  | mipi->next_display_on = pdata->lcd_chan->board_cfg.display_on; | 
|  | mipi->next_display_off = pdata->lcd_chan->board_cfg.display_off; | 
|  |  | 
|  | /* Set up LCDC callbacks */ | 
|  | pdata->lcd_chan->board_cfg.board_data = mipi; | 
|  | pdata->lcd_chan->board_cfg.display_on = mipi_display_on; | 
|  | pdata->lcd_chan->board_cfg.display_off = mipi_display_off; | 
|  | pdata->lcd_chan->board_cfg.owner = THIS_MODULE; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | emipisetup: | 
|  | mipi_dsi[idx] = NULL; | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | clk_disable(mipi->dsip_clk); | 
|  | eclkpon: | 
|  | clk_disable(mipi->dsit_clk); | 
|  | eclkton: | 
|  | esetprate: | 
|  | clk_put(mipi->dsip_clk); | 
|  | eclkpget: | 
|  | esettrate: | 
|  | clk_put(mipi->dsit_clk); | 
|  | eclktget: | 
|  | iounmap(mipi->linkbase); | 
|  | emap2: | 
|  | release_mem_region(res2->start, resource_size(res2)); | 
|  | ereqreg2: | 
|  | iounmap(mipi->base); | 
|  | emap: | 
|  | release_mem_region(res->start, resource_size(res)); | 
|  | ereqreg: | 
|  | kfree(mipi); | 
|  | ealloc: | 
|  | efindslot: | 
|  | mutex_unlock(&array_lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __exit sh_mipi_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data; | 
|  | struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | struct resource *res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1); | 
|  | struct sh_mipi *mipi = platform_get_drvdata(pdev); | 
|  | int i, ret; | 
|  |  | 
|  | mutex_lock(&array_lock); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(mipi_dsi) && mipi_dsi[i] != mipi; i++) | 
|  | ; | 
|  |  | 
|  | if (i == ARRAY_SIZE(mipi_dsi)) { | 
|  | ret = -EINVAL; | 
|  | } else { | 
|  | ret = 0; | 
|  | mipi_dsi[i] = NULL; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&array_lock); | 
|  |  | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | pdata->lcd_chan->board_cfg.owner = NULL; | 
|  | pdata->lcd_chan->board_cfg.display_on = NULL; | 
|  | pdata->lcd_chan->board_cfg.display_off = NULL; | 
|  | pdata->lcd_chan->board_cfg.board_data = NULL; | 
|  |  | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | clk_disable(mipi->dsip_clk); | 
|  | clk_disable(mipi->dsit_clk); | 
|  | clk_put(mipi->dsit_clk); | 
|  | clk_put(mipi->dsip_clk); | 
|  | iounmap(mipi->linkbase); | 
|  | if (res2) | 
|  | release_mem_region(res2->start, resource_size(res2)); | 
|  | iounmap(mipi->base); | 
|  | if (res) | 
|  | release_mem_region(res->start, resource_size(res)); | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | kfree(mipi); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver sh_mipi_driver = { | 
|  | .remove		= __exit_p(sh_mipi_remove), | 
|  | .shutdown	= sh_mipi_shutdown, | 
|  | .driver = { | 
|  | .name	= "sh-mipi-dsi", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init sh_mipi_init(void) | 
|  | { | 
|  | return platform_driver_probe(&sh_mipi_driver, sh_mipi_probe); | 
|  | } | 
|  | module_init(sh_mipi_init); | 
|  |  | 
|  | static void __exit sh_mipi_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&sh_mipi_driver); | 
|  | } | 
|  | module_exit(sh_mipi_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); | 
|  | MODULE_DESCRIPTION("SuperH / ARM-shmobile MIPI DSI driver"); | 
|  | MODULE_LICENSE("GPL v2"); |