|  | /* | 
|  | * DVB USB library - provides a generic interface for a DVB USB device driver. | 
|  | * | 
|  | * dvb-usb-init.c | 
|  | * | 
|  | * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) | 
|  | * | 
|  | *	This program is free software; you can redistribute it and/or modify it | 
|  | *	under the terms of the GNU General Public License as published by the Free | 
|  | *	Software Foundation, version 2. | 
|  | * | 
|  | * see Documentation/dvb/README.dvb-usb for more information | 
|  | */ | 
|  | #include "dvb-usb-common.h" | 
|  |  | 
|  | /* debug */ | 
|  | int dvb_usb_debug; | 
|  | module_param_named(debug,dvb_usb_debug, int, 0644); | 
|  | MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64,mem=128,uxfer=256  (or-able))." DVB_USB_DEBUG_STATUS); | 
|  |  | 
|  | int dvb_usb_disable_rc_polling; | 
|  | module_param_named(disable_rc_polling, dvb_usb_disable_rc_polling, int, 0644); | 
|  | MODULE_PARM_DESC(disable_rc_polling, "disable remote control polling (default: 0)."); | 
|  |  | 
|  | static int dvb_usb_force_pid_filter_usage; | 
|  | module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444); | 
|  | MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0)."); | 
|  |  | 
|  | static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs) | 
|  | { | 
|  | struct dvb_usb_adapter *adap; | 
|  | int ret,n; | 
|  |  | 
|  | for (n = 0; n < d->props.num_adapters; n++) { | 
|  | adap = &d->adapter[n]; | 
|  | adap->dev = d; | 
|  | adap->id  = n; | 
|  |  | 
|  | memcpy(&adap->props, &d->props.adapter[n], sizeof(struct dvb_usb_adapter_properties)); | 
|  |  | 
|  | /* speed - when running at FULL speed we need a HW PID filter */ | 
|  | if (d->udev->speed == USB_SPEED_FULL && !(adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER)) { | 
|  | err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if ((d->udev->speed == USB_SPEED_FULL && adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER) || | 
|  | (adap->props.caps & DVB_USB_ADAP_NEED_PID_FILTERING)) { | 
|  | info("will use the device's hardware PID filter (table count: %d).",adap->props.pid_filter_count); | 
|  | adap->pid_filtering  = 1; | 
|  | adap->max_feed_count = adap->props.pid_filter_count; | 
|  | } else { | 
|  | info("will pass the complete MPEG2 transport stream to the software demuxer."); | 
|  | adap->pid_filtering  = 0; | 
|  | adap->max_feed_count = 255; | 
|  | } | 
|  |  | 
|  | if (!adap->pid_filtering && | 
|  | dvb_usb_force_pid_filter_usage && | 
|  | adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER) { | 
|  | info("pid filter enabled by module option."); | 
|  | adap->pid_filtering  = 1; | 
|  | adap->max_feed_count = adap->props.pid_filter_count; | 
|  | } | 
|  |  | 
|  | if (adap->props.size_of_priv > 0) { | 
|  | adap->priv = kzalloc(adap->props.size_of_priv,GFP_KERNEL); | 
|  | if (adap->priv == NULL) { | 
|  | err("no memory for priv for adapter %d.",n); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((ret = dvb_usb_adapter_stream_init(adap)) || | 
|  | (ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) || | 
|  | (ret = dvb_usb_adapter_frontend_init(adap))) { | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | d->num_adapters_initialized++; | 
|  | d->state |= DVB_USB_STATE_DVB; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * when reloading the driver w/o replugging the device | 
|  | * sometimes a timeout occures, this helps | 
|  | */ | 
|  | if (d->props.generic_bulk_ctrl_endpoint != 0) { | 
|  | usb_clear_halt(d->udev,usb_sndbulkpipe(d->udev,d->props.generic_bulk_ctrl_endpoint)); | 
|  | usb_clear_halt(d->udev,usb_rcvbulkpipe(d->udev,d->props.generic_bulk_ctrl_endpoint)); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int dvb_usb_adapter_exit(struct dvb_usb_device *d) | 
|  | { | 
|  | int n; | 
|  | for (n = 0; n < d->num_adapters_initialized; n++) { | 
|  | dvb_usb_adapter_frontend_exit(&d->adapter[n]); | 
|  | dvb_usb_adapter_dvb_exit(&d->adapter[n]); | 
|  | dvb_usb_adapter_stream_exit(&d->adapter[n]); | 
|  | kfree(d->adapter[n].priv); | 
|  | } | 
|  | d->num_adapters_initialized = 0; | 
|  | d->state &= ~DVB_USB_STATE_DVB; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* general initialization functions */ | 
|  | static int dvb_usb_exit(struct dvb_usb_device *d) | 
|  | { | 
|  | deb_info("state before exiting everything: %x\n",d->state); | 
|  | dvb_usb_remote_exit(d); | 
|  | dvb_usb_adapter_exit(d); | 
|  | dvb_usb_i2c_exit(d); | 
|  | deb_info("state should be zero now: %x\n",d->state); | 
|  | d->state = DVB_USB_STATE_INIT; | 
|  | kfree(d->priv); | 
|  | kfree(d); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_init(&d->usb_mutex); | 
|  | mutex_init(&d->i2c_mutex); | 
|  |  | 
|  | d->state = DVB_USB_STATE_INIT; | 
|  |  | 
|  | if (d->props.size_of_priv > 0) { | 
|  | d->priv = kzalloc(d->props.size_of_priv,GFP_KERNEL); | 
|  | if (d->priv == NULL) { | 
|  | err("no memory for priv in 'struct dvb_usb_device'"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* check the capabilities and set appropriate variables */ | 
|  | dvb_usb_device_power_ctrl(d, 1); | 
|  |  | 
|  | if ((ret = dvb_usb_i2c_init(d)) || | 
|  | (ret = dvb_usb_adapter_init(d, adapter_nums))) { | 
|  | dvb_usb_exit(d); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if ((ret = dvb_usb_remote_init(d))) | 
|  | err("could not initialize remote control."); | 
|  |  | 
|  | dvb_usb_device_power_ctrl(d, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* determine the name and the state of the just found USB device */ | 
|  | static struct dvb_usb_device_description * dvb_usb_find_device(struct usb_device *udev,struct dvb_usb_device_properties *props, int *cold) | 
|  | { | 
|  | int i,j; | 
|  | struct dvb_usb_device_description *desc = NULL; | 
|  | *cold = -1; | 
|  |  | 
|  | for (i = 0; i < props->num_device_descs; i++) { | 
|  |  | 
|  | for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].cold_ids[j] != NULL; j++) { | 
|  | deb_info("check for cold %x %x\n",props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct); | 
|  | if (props->devices[i].cold_ids[j]->idVendor  == le16_to_cpu(udev->descriptor.idVendor) && | 
|  | props->devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { | 
|  | *cold = 1; | 
|  | desc = &props->devices[i]; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (desc != NULL) | 
|  | break; | 
|  |  | 
|  | for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].warm_ids[j] != NULL; j++) { | 
|  | deb_info("check for warm %x %x\n",props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct); | 
|  | if (props->devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && | 
|  | props->devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { | 
|  | *cold = 0; | 
|  | desc = &props->devices[i]; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (desc != NULL && props->identify_state != NULL) | 
|  | props->identify_state(udev,props,&desc,cold); | 
|  |  | 
|  | return desc; | 
|  | } | 
|  |  | 
|  | int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff) | 
|  | { | 
|  | if (onoff) | 
|  | d->powered++; | 
|  | else | 
|  | d->powered--; | 
|  |  | 
|  | if (d->powered == 0 || (onoff && d->powered == 1)) { // when switching from 1 to 0 or from 0 to 1 | 
|  | deb_info("power control: %d\n", onoff); | 
|  | if (d->props.power_ctrl) | 
|  | return d->props.power_ctrl(d, onoff); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * USB | 
|  | */ | 
|  | int dvb_usb_device_init(struct usb_interface *intf, | 
|  | struct dvb_usb_device_properties *props, | 
|  | struct module *owner, struct dvb_usb_device **du, | 
|  | short *adapter_nums) | 
|  | { | 
|  | struct usb_device *udev = interface_to_usbdev(intf); | 
|  | struct dvb_usb_device *d = NULL; | 
|  | struct dvb_usb_device_description *desc = NULL; | 
|  |  | 
|  | int ret = -ENOMEM,cold=0; | 
|  |  | 
|  | if (du != NULL) | 
|  | *du = NULL; | 
|  |  | 
|  | if ((desc = dvb_usb_find_device(udev,props,&cold)) == NULL) { | 
|  | deb_err("something went very wrong, device was not found in current device list - let's see what comes next.\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (cold) { | 
|  | info("found a '%s' in cold state, will try to load a firmware",desc->name); | 
|  | ret = dvb_usb_download_firmware(udev,props); | 
|  | if (!props->no_reconnect || ret != 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | info("found a '%s' in warm state.",desc->name); | 
|  | d = kzalloc(sizeof(struct dvb_usb_device),GFP_KERNEL); | 
|  | if (d == NULL) { | 
|  | err("no memory for 'struct dvb_usb_device'"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | d->udev = udev; | 
|  | memcpy(&d->props,props,sizeof(struct dvb_usb_device_properties)); | 
|  | d->desc = desc; | 
|  | d->owner = owner; | 
|  |  | 
|  | usb_set_intfdata(intf, d); | 
|  |  | 
|  | if (du != NULL) | 
|  | *du = d; | 
|  |  | 
|  | ret = dvb_usb_init(d, adapter_nums); | 
|  |  | 
|  | if (ret == 0) | 
|  | info("%s successfully initialized and connected.",desc->name); | 
|  | else | 
|  | info("%s error while loading driver (%d)",desc->name,ret); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(dvb_usb_device_init); | 
|  |  | 
|  | void dvb_usb_device_exit(struct usb_interface *intf) | 
|  | { | 
|  | struct dvb_usb_device *d = usb_get_intfdata(intf); | 
|  | const char *name = "generic DVB-USB module"; | 
|  |  | 
|  | usb_set_intfdata(intf,NULL); | 
|  | if (d != NULL && d->desc != NULL) { | 
|  | name = d->desc->name; | 
|  | dvb_usb_exit(d); | 
|  | } | 
|  | info("%s successfully deinitialized and disconnected.",name); | 
|  |  | 
|  | } | 
|  | EXPORT_SYMBOL(dvb_usb_device_exit); | 
|  |  | 
|  | MODULE_VERSION("1.0"); | 
|  | MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); | 
|  | MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices"); | 
|  | MODULE_LICENSE("GPL"); |