|  | /* SF16FMI radio driver for Linux radio support | 
|  | * heavily based on rtrack driver... | 
|  | * (c) 1997 M. Kirkwood | 
|  | * (c) 1998 Petr Vandrovec, vandrove@vc.cvut.cz | 
|  | * | 
|  | * Fitted to new interface by Alan Cox <alan@lxorguk.ukuu.org.uk> | 
|  | * Made working and cleaned up functions <mikael.hedin@irf.se> | 
|  | * Support for ISAPnP by Ladislav Michl <ladis@psi.cz> | 
|  | * | 
|  | * Notes on the hardware | 
|  | * | 
|  | *  Frequency control is done digitally -- ie out(port,encodefreq(95.8)); | 
|  | *  No volume control - only mute/unmute - you have to use line volume | 
|  | *  control on SB-part of SF16FMI | 
|  | * | 
|  | * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> | 
|  | */ | 
|  |  | 
|  | #include <linux/version.h> | 
|  | #include <linux/kernel.h>	/* __setup			*/ | 
|  | #include <linux/module.h>	/* Modules 			*/ | 
|  | #include <linux/init.h>		/* Initdata			*/ | 
|  | #include <linux/ioport.h>	/* request_region		*/ | 
|  | #include <linux/delay.h>	/* udelay			*/ | 
|  | #include <linux/isapnp.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/videodev2.h>	/* kernel radio structs		*/ | 
|  | #include <linux/io.h>		/* outb, outb_p			*/ | 
|  | #include <media/v4l2-device.h> | 
|  | #include <media/v4l2-ioctl.h> | 
|  |  | 
|  | MODULE_AUTHOR("Petr Vandrovec, vandrove@vc.cvut.cz and M. Kirkwood"); | 
|  | MODULE_DESCRIPTION("A driver for the SF16MI radio."); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | static int io = -1; | 
|  | static int radio_nr = -1; | 
|  |  | 
|  | module_param(io, int, 0); | 
|  | MODULE_PARM_DESC(io, "I/O address of the SF16MI card (0x284 or 0x384)"); | 
|  | module_param(radio_nr, int, 0); | 
|  |  | 
|  | #define RADIO_VERSION KERNEL_VERSION(0, 0, 2) | 
|  |  | 
|  | struct fmi | 
|  | { | 
|  | struct v4l2_device v4l2_dev; | 
|  | struct video_device vdev; | 
|  | int io; | 
|  | int curvol; /* 1 or 0 */ | 
|  | unsigned long curfreq; /* freq in kHz */ | 
|  | struct mutex lock; | 
|  | }; | 
|  |  | 
|  | static struct fmi fmi_card; | 
|  | static struct pnp_dev *dev; | 
|  |  | 
|  | /* freq is in 1/16 kHz to internal number, hw precision is 50 kHz */ | 
|  | /* It is only useful to give freq in interval of 800 (=0.05Mhz), | 
|  | * other bits will be truncated, e.g 92.7400016 -> 92.7, but | 
|  | * 92.7400017 -> 92.75 | 
|  | */ | 
|  | #define RSF16_ENCODE(x)	((x) / 800 + 214) | 
|  | #define RSF16_MINFREQ (87 * 16000) | 
|  | #define RSF16_MAXFREQ (108 * 16000) | 
|  |  | 
|  | static void outbits(int bits, unsigned int data, int io) | 
|  | { | 
|  | while (bits--) { | 
|  | if (data & 1) { | 
|  | outb(5, io); | 
|  | udelay(6); | 
|  | outb(7, io); | 
|  | udelay(6); | 
|  | } else { | 
|  | outb(1, io); | 
|  | udelay(6); | 
|  | outb(3, io); | 
|  | udelay(6); | 
|  | } | 
|  | data >>= 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline void fmi_mute(struct fmi *fmi) | 
|  | { | 
|  | mutex_lock(&fmi->lock); | 
|  | outb(0x00, fmi->io); | 
|  | mutex_unlock(&fmi->lock); | 
|  | } | 
|  |  | 
|  | static inline void fmi_unmute(struct fmi *fmi) | 
|  | { | 
|  | mutex_lock(&fmi->lock); | 
|  | outb(0x08, fmi->io); | 
|  | mutex_unlock(&fmi->lock); | 
|  | } | 
|  |  | 
|  | static inline int fmi_setfreq(struct fmi *fmi, unsigned long freq) | 
|  | { | 
|  | mutex_lock(&fmi->lock); | 
|  | fmi->curfreq = freq; | 
|  |  | 
|  | outbits(16, RSF16_ENCODE(freq), fmi->io); | 
|  | outbits(8, 0xC0, fmi->io); | 
|  | msleep(143);		/* was schedule_timeout(HZ/7) */ | 
|  | mutex_unlock(&fmi->lock); | 
|  | if (fmi->curvol) | 
|  | fmi_unmute(fmi); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int fmi_getsigstr(struct fmi *fmi) | 
|  | { | 
|  | int val; | 
|  | int res; | 
|  |  | 
|  | mutex_lock(&fmi->lock); | 
|  | val = fmi->curvol ? 0x08 : 0x00;	/* unmute/mute */ | 
|  | outb(val, fmi->io); | 
|  | outb(val | 0x10, fmi->io); | 
|  | msleep(143); 		/* was schedule_timeout(HZ/7) */ | 
|  | res = (int)inb(fmi->io + 1); | 
|  | outb(val, fmi->io); | 
|  |  | 
|  | mutex_unlock(&fmi->lock); | 
|  | return (res & 2) ? 0 : 0xFFFF; | 
|  | } | 
|  |  | 
|  | static int vidioc_querycap(struct file *file, void  *priv, | 
|  | struct v4l2_capability *v) | 
|  | { | 
|  | strlcpy(v->driver, "radio-sf16fmi", sizeof(v->driver)); | 
|  | strlcpy(v->card, "SF16-FMx radio", sizeof(v->card)); | 
|  | strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); | 
|  | v->version = RADIO_VERSION; | 
|  | v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vidioc_g_tuner(struct file *file, void *priv, | 
|  | struct v4l2_tuner *v) | 
|  | { | 
|  | struct fmi *fmi = video_drvdata(file); | 
|  |  | 
|  | if (v->index > 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | strlcpy(v->name, "FM", sizeof(v->name)); | 
|  | v->type = V4L2_TUNER_RADIO; | 
|  | v->rangelow = RSF16_MINFREQ; | 
|  | v->rangehigh = RSF16_MAXFREQ; | 
|  | v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; | 
|  | v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW; | 
|  | v->audmode = V4L2_TUNER_MODE_STEREO; | 
|  | v->signal = fmi_getsigstr(fmi); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vidioc_s_tuner(struct file *file, void *priv, | 
|  | struct v4l2_tuner *v) | 
|  | { | 
|  | return v->index ? -EINVAL : 0; | 
|  | } | 
|  |  | 
|  | static int vidioc_s_frequency(struct file *file, void *priv, | 
|  | struct v4l2_frequency *f) | 
|  | { | 
|  | struct fmi *fmi = video_drvdata(file); | 
|  |  | 
|  | if (f->frequency < RSF16_MINFREQ || | 
|  | f->frequency > RSF16_MAXFREQ) | 
|  | return -EINVAL; | 
|  | /* rounding in steps of 800 to match the freq | 
|  | that will be used */ | 
|  | fmi_setfreq(fmi, (f->frequency / 800) * 800); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vidioc_g_frequency(struct file *file, void *priv, | 
|  | struct v4l2_frequency *f) | 
|  | { | 
|  | struct fmi *fmi = video_drvdata(file); | 
|  |  | 
|  | f->type = V4L2_TUNER_RADIO; | 
|  | f->frequency = fmi->curfreq; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vidioc_queryctrl(struct file *file, void *priv, | 
|  | struct v4l2_queryctrl *qc) | 
|  | { | 
|  | switch (qc->id) { | 
|  | case V4L2_CID_AUDIO_MUTE: | 
|  | return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int vidioc_g_ctrl(struct file *file, void *priv, | 
|  | struct v4l2_control *ctrl) | 
|  | { | 
|  | struct fmi *fmi = video_drvdata(file); | 
|  |  | 
|  | switch (ctrl->id) { | 
|  | case V4L2_CID_AUDIO_MUTE: | 
|  | ctrl->value = fmi->curvol; | 
|  | return 0; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int vidioc_s_ctrl(struct file *file, void *priv, | 
|  | struct v4l2_control *ctrl) | 
|  | { | 
|  | struct fmi *fmi = video_drvdata(file); | 
|  |  | 
|  | switch (ctrl->id) { | 
|  | case V4L2_CID_AUDIO_MUTE: | 
|  | if (ctrl->value) | 
|  | fmi_mute(fmi); | 
|  | else | 
|  | fmi_unmute(fmi); | 
|  | fmi->curvol = ctrl->value; | 
|  | return 0; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) | 
|  | { | 
|  | *i = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) | 
|  | { | 
|  | return i ? -EINVAL : 0; | 
|  | } | 
|  |  | 
|  | static int vidioc_g_audio(struct file *file, void *priv, | 
|  | struct v4l2_audio *a) | 
|  | { | 
|  | a->index = 0; | 
|  | strlcpy(a->name, "Radio", sizeof(a->name)); | 
|  | a->capability = V4L2_AUDCAP_STEREO; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vidioc_s_audio(struct file *file, void *priv, | 
|  | struct v4l2_audio *a) | 
|  | { | 
|  | return a->index ? -EINVAL : 0; | 
|  | } | 
|  |  | 
|  | static const struct v4l2_file_operations fmi_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .ioctl		= video_ioctl2, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_ioctl_ops fmi_ioctl_ops = { | 
|  | .vidioc_querycap    = vidioc_querycap, | 
|  | .vidioc_g_tuner     = vidioc_g_tuner, | 
|  | .vidioc_s_tuner     = vidioc_s_tuner, | 
|  | .vidioc_g_audio     = vidioc_g_audio, | 
|  | .vidioc_s_audio     = vidioc_s_audio, | 
|  | .vidioc_g_input     = vidioc_g_input, | 
|  | .vidioc_s_input     = vidioc_s_input, | 
|  | .vidioc_g_frequency = vidioc_g_frequency, | 
|  | .vidioc_s_frequency = vidioc_s_frequency, | 
|  | .vidioc_queryctrl   = vidioc_queryctrl, | 
|  | .vidioc_g_ctrl      = vidioc_g_ctrl, | 
|  | .vidioc_s_ctrl      = vidioc_s_ctrl, | 
|  | }; | 
|  |  | 
|  | /* ladis: this is my card. does any other types exist? */ | 
|  | static struct isapnp_device_id id_table[] __devinitdata = { | 
|  | {	ISAPNP_ANY_ID, ISAPNP_ANY_ID, | 
|  | ISAPNP_VENDOR('M','F','R'), ISAPNP_FUNCTION(0xad10), 0}, | 
|  | {	ISAPNP_CARD_END, }, | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(isapnp, id_table); | 
|  |  | 
|  | static int __init isapnp_fmi_probe(void) | 
|  | { | 
|  | int i = 0; | 
|  |  | 
|  | while (id_table[i].card_vendor != 0 && dev == NULL) { | 
|  | dev = pnp_find_dev(NULL, id_table[i].vendor, | 
|  | id_table[i].function, NULL); | 
|  | i++; | 
|  | } | 
|  |  | 
|  | if (!dev) | 
|  | return -ENODEV; | 
|  | if (pnp_device_attach(dev) < 0) | 
|  | return -EAGAIN; | 
|  | if (pnp_activate_dev(dev) < 0) { | 
|  | printk(KERN_ERR "radio-sf16fmi: PnP configure failed (out of resources?)\n"); | 
|  | pnp_device_detach(dev); | 
|  | return -ENOMEM; | 
|  | } | 
|  | if (!pnp_port_valid(dev, 0)) { | 
|  | pnp_device_detach(dev); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | i = pnp_port_start(dev, 0); | 
|  | printk(KERN_INFO "radio-sf16fmi: PnP reports card at %#x\n", i); | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static int __init fmi_init(void) | 
|  | { | 
|  | struct fmi *fmi = &fmi_card; | 
|  | struct v4l2_device *v4l2_dev = &fmi->v4l2_dev; | 
|  | int res; | 
|  |  | 
|  | if (io < 0) | 
|  | io = isapnp_fmi_probe(); | 
|  | strlcpy(v4l2_dev->name, "sf16fmi", sizeof(v4l2_dev->name)); | 
|  | fmi->io = io; | 
|  | if (fmi->io < 0) { | 
|  | v4l2_err(v4l2_dev, "No PnP card found.\n"); | 
|  | return fmi->io; | 
|  | } | 
|  | if (!request_region(io, 2, "radio-sf16fmi")) { | 
|  | v4l2_err(v4l2_dev, "port 0x%x already in use\n", fmi->io); | 
|  | pnp_device_detach(dev); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | res = v4l2_device_register(NULL, v4l2_dev); | 
|  | if (res < 0) { | 
|  | release_region(fmi->io, 2); | 
|  | pnp_device_detach(dev); | 
|  | v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | strlcpy(fmi->vdev.name, v4l2_dev->name, sizeof(fmi->vdev.name)); | 
|  | fmi->vdev.v4l2_dev = v4l2_dev; | 
|  | fmi->vdev.fops = &fmi_fops; | 
|  | fmi->vdev.ioctl_ops = &fmi_ioctl_ops; | 
|  | fmi->vdev.release = video_device_release_empty; | 
|  | video_set_drvdata(&fmi->vdev, fmi); | 
|  |  | 
|  | mutex_init(&fmi->lock); | 
|  |  | 
|  | if (video_register_device(&fmi->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { | 
|  | v4l2_device_unregister(v4l2_dev); | 
|  | release_region(fmi->io, 2); | 
|  | pnp_device_detach(dev); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | v4l2_info(v4l2_dev, "card driver at 0x%x\n", fmi->io); | 
|  | /* mute card - prevents noisy bootups */ | 
|  | fmi_mute(fmi); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit fmi_exit(void) | 
|  | { | 
|  | struct fmi *fmi = &fmi_card; | 
|  |  | 
|  | video_unregister_device(&fmi->vdev); | 
|  | v4l2_device_unregister(&fmi->v4l2_dev); | 
|  | release_region(fmi->io, 2); | 
|  | if (dev) | 
|  | pnp_device_detach(dev); | 
|  | } | 
|  |  | 
|  | module_init(fmi_init); | 
|  | module_exit(fmi_exit); |