| /* | 
 |  * Signal handling for 32bit PPC and 32bit tasks on 64bit PPC | 
 |  * | 
 |  *  PowerPC version | 
 |  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) | 
 |  * Copyright (C) 2001 IBM | 
 |  * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) | 
 |  * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) | 
 |  * | 
 |  *  Derived from "arch/i386/kernel/signal.c" | 
 |  *    Copyright (C) 1991, 1992 Linus Torvalds | 
 |  *    1997-11-28  Modified for POSIX.1b signals by Richard Henderson | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or | 
 |  *  modify it under the terms of the GNU General Public License | 
 |  *  as published by the Free Software Foundation; either version | 
 |  *  2 of the License, or (at your option) any later version. | 
 |  */ | 
 |  | 
 | #include <linux/sched.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/smp.h> | 
 | #include <linux/smp_lock.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/signal.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/elf.h> | 
 | #ifdef CONFIG_PPC64 | 
 | #include <linux/syscalls.h> | 
 | #include <linux/compat.h> | 
 | #include <linux/ptrace.h> | 
 | #else | 
 | #include <linux/wait.h> | 
 | #include <linux/ptrace.h> | 
 | #include <linux/unistd.h> | 
 | #include <linux/stddef.h> | 
 | #include <linux/tty.h> | 
 | #include <linux/binfmts.h> | 
 | #include <linux/freezer.h> | 
 | #endif | 
 |  | 
 | #include <asm/uaccess.h> | 
 | #include <asm/cacheflush.h> | 
 | #include <asm/syscalls.h> | 
 | #include <asm/sigcontext.h> | 
 | #include <asm/vdso.h> | 
 | #ifdef CONFIG_PPC64 | 
 | #include "ppc32.h" | 
 | #include <asm/unistd.h> | 
 | #else | 
 | #include <asm/ucontext.h> | 
 | #include <asm/pgtable.h> | 
 | #endif | 
 |  | 
 | #undef DEBUG_SIG | 
 |  | 
 | #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) | 
 |  | 
 | #ifdef CONFIG_PPC64 | 
 | #define do_signal	do_signal32 | 
 | #define sys_sigsuspend	compat_sys_sigsuspend | 
 | #define sys_rt_sigsuspend	compat_sys_rt_sigsuspend | 
 | #define sys_rt_sigreturn	compat_sys_rt_sigreturn | 
 | #define sys_sigaction	compat_sys_sigaction | 
 | #define sys_swapcontext	compat_sys_swapcontext | 
 | #define sys_sigreturn	compat_sys_sigreturn | 
 |  | 
 | #define old_sigaction	old_sigaction32 | 
 | #define sigcontext	sigcontext32 | 
 | #define mcontext	mcontext32 | 
 | #define ucontext	ucontext32 | 
 |  | 
 | /* | 
 |  * Returning 0 means we return to userspace via | 
 |  * ret_from_except and thus restore all user | 
 |  * registers from *regs.  This is what we need | 
 |  * to do when a signal has been delivered. | 
 |  */ | 
 |  | 
 | #define GP_REGS_SIZE	min(sizeof(elf_gregset_t32), sizeof(struct pt_regs32)) | 
 | #undef __SIGNAL_FRAMESIZE | 
 | #define __SIGNAL_FRAMESIZE	__SIGNAL_FRAMESIZE32 | 
 | #undef ELF_NVRREG | 
 | #define ELF_NVRREG	ELF_NVRREG32 | 
 |  | 
 | /* | 
 |  * Functions for flipping sigsets (thanks to brain dead generic | 
 |  * implementation that makes things simple for little endian only) | 
 |  */ | 
 | static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set) | 
 | { | 
 | 	compat_sigset_t	cset; | 
 |  | 
 | 	switch (_NSIG_WORDS) { | 
 | 	case 4: cset.sig[5] = set->sig[3] & 0xffffffffull; | 
 | 		cset.sig[7] = set->sig[3] >> 32; | 
 | 	case 3: cset.sig[4] = set->sig[2] & 0xffffffffull; | 
 | 		cset.sig[5] = set->sig[2] >> 32; | 
 | 	case 2: cset.sig[2] = set->sig[1] & 0xffffffffull; | 
 | 		cset.sig[3] = set->sig[1] >> 32; | 
 | 	case 1: cset.sig[0] = set->sig[0] & 0xffffffffull; | 
 | 		cset.sig[1] = set->sig[0] >> 32; | 
 | 	} | 
 | 	return copy_to_user(uset, &cset, sizeof(*uset)); | 
 | } | 
 |  | 
 | static inline int get_sigset_t(sigset_t *set, | 
 | 			       const compat_sigset_t __user *uset) | 
 | { | 
 | 	compat_sigset_t s32; | 
 |  | 
 | 	if (copy_from_user(&s32, uset, sizeof(*uset))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* | 
 | 	 * Swap the 2 words of the 64-bit sigset_t (they are stored | 
 | 	 * in the "wrong" endian in 32-bit user storage). | 
 | 	 */ | 
 | 	switch (_NSIG_WORDS) { | 
 | 	case 4: set->sig[3] = s32.sig[6] | (((long)s32.sig[7]) << 32); | 
 | 	case 3: set->sig[2] = s32.sig[4] | (((long)s32.sig[5]) << 32); | 
 | 	case 2: set->sig[1] = s32.sig[2] | (((long)s32.sig[3]) << 32); | 
 | 	case 1: set->sig[0] = s32.sig[0] | (((long)s32.sig[1]) << 32); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline int get_old_sigaction(struct k_sigaction *new_ka, | 
 | 		struct old_sigaction __user *act) | 
 | { | 
 | 	compat_old_sigset_t mask; | 
 | 	compat_uptr_t handler, restorer; | 
 |  | 
 | 	if (get_user(handler, &act->sa_handler) || | 
 | 	    __get_user(restorer, &act->sa_restorer) || | 
 | 	    __get_user(new_ka->sa.sa_flags, &act->sa_flags) || | 
 | 	    __get_user(mask, &act->sa_mask)) | 
 | 		return -EFAULT; | 
 | 	new_ka->sa.sa_handler = compat_ptr(handler); | 
 | 	new_ka->sa.sa_restorer = compat_ptr(restorer); | 
 | 	siginitset(&new_ka->sa.sa_mask, mask); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #define to_user_ptr(p)		ptr_to_compat(p) | 
 | #define from_user_ptr(p)	compat_ptr(p) | 
 |  | 
 | static inline int save_general_regs(struct pt_regs *regs, | 
 | 		struct mcontext __user *frame) | 
 | { | 
 | 	elf_greg_t64 *gregs = (elf_greg_t64 *)regs; | 
 | 	int i; | 
 |  | 
 | 	WARN_ON(!FULL_REGS(regs)); | 
 |  | 
 | 	for (i = 0; i <= PT_RESULT; i ++) { | 
 | 		if (i == 14 && !FULL_REGS(regs)) | 
 | 			i = 32; | 
 | 		if (__put_user((unsigned int)gregs[i], &frame->mc_gregs[i])) | 
 | 			return -EFAULT; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline int restore_general_regs(struct pt_regs *regs, | 
 | 		struct mcontext __user *sr) | 
 | { | 
 | 	elf_greg_t64 *gregs = (elf_greg_t64 *)regs; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i <= PT_RESULT; i++) { | 
 | 		if ((i == PT_MSR) || (i == PT_SOFTE)) | 
 | 			continue; | 
 | 		if (__get_user(gregs[i], &sr->mc_gregs[i])) | 
 | 			return -EFAULT; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | #else /* CONFIG_PPC64 */ | 
 |  | 
 | #define GP_REGS_SIZE	min(sizeof(elf_gregset_t), sizeof(struct pt_regs)) | 
 |  | 
 | static inline int put_sigset_t(sigset_t __user *uset, sigset_t *set) | 
 | { | 
 | 	return copy_to_user(uset, set, sizeof(*uset)); | 
 | } | 
 |  | 
 | static inline int get_sigset_t(sigset_t *set, const sigset_t __user *uset) | 
 | { | 
 | 	return copy_from_user(set, uset, sizeof(*uset)); | 
 | } | 
 |  | 
 | static inline int get_old_sigaction(struct k_sigaction *new_ka, | 
 | 		struct old_sigaction __user *act) | 
 | { | 
 | 	old_sigset_t mask; | 
 |  | 
 | 	if (!access_ok(VERIFY_READ, act, sizeof(*act)) || | 
 | 			__get_user(new_ka->sa.sa_handler, &act->sa_handler) || | 
 | 			__get_user(new_ka->sa.sa_restorer, &act->sa_restorer)) | 
 | 		return -EFAULT; | 
 | 	__get_user(new_ka->sa.sa_flags, &act->sa_flags); | 
 | 	__get_user(mask, &act->sa_mask); | 
 | 	siginitset(&new_ka->sa.sa_mask, mask); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #define to_user_ptr(p)		((unsigned long)(p)) | 
 | #define from_user_ptr(p)	((void __user *)(p)) | 
 |  | 
 | static inline int save_general_regs(struct pt_regs *regs, | 
 | 		struct mcontext __user *frame) | 
 | { | 
 | 	WARN_ON(!FULL_REGS(regs)); | 
 | 	return __copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE); | 
 | } | 
 |  | 
 | static inline int restore_general_regs(struct pt_regs *regs, | 
 | 		struct mcontext __user *sr) | 
 | { | 
 | 	/* copy up to but not including MSR */ | 
 | 	if (__copy_from_user(regs, &sr->mc_gregs, | 
 | 				PT_MSR * sizeof(elf_greg_t))) | 
 | 		return -EFAULT; | 
 | 	/* copy from orig_r3 (the word after the MSR) up to the end */ | 
 | 	if (__copy_from_user(®s->orig_gpr3, &sr->mc_gregs[PT_ORIG_R3], | 
 | 				GP_REGS_SIZE - PT_ORIG_R3 * sizeof(elf_greg_t))) | 
 | 		return -EFAULT; | 
 | 	return 0; | 
 | } | 
 |  | 
 | #endif /* CONFIG_PPC64 */ | 
 |  | 
 | int do_signal(sigset_t *oldset, struct pt_regs *regs); | 
 |  | 
 | /* | 
 |  * Atomically swap in the new signal mask, and wait for a signal. | 
 |  */ | 
 | long sys_sigsuspend(old_sigset_t mask) | 
 | { | 
 | 	mask &= _BLOCKABLE; | 
 | 	spin_lock_irq(¤t->sighand->siglock); | 
 | 	current->saved_sigmask = current->blocked; | 
 | 	siginitset(¤t->blocked, mask); | 
 | 	recalc_sigpending(); | 
 | 	spin_unlock_irq(¤t->sighand->siglock); | 
 |  | 
 |  	current->state = TASK_INTERRUPTIBLE; | 
 |  	schedule(); | 
 |  	set_thread_flag(TIF_RESTORE_SIGMASK); | 
 |  	return -ERESTARTNOHAND; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PPC32 | 
 | long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, int r5, | 
 | 		int r6, int r7, int r8, struct pt_regs *regs) | 
 | { | 
 | 	return do_sigaltstack(uss, uoss, regs->gpr[1]); | 
 | } | 
 | #endif | 
 |  | 
 | long sys_sigaction(int sig, struct old_sigaction __user *act, | 
 | 		struct old_sigaction __user *oact) | 
 | { | 
 | 	struct k_sigaction new_ka, old_ka; | 
 | 	int ret; | 
 |  | 
 | #ifdef CONFIG_PPC64 | 
 | 	if (sig < 0) | 
 | 		sig = -sig; | 
 | #endif | 
 |  | 
 | 	if (act) { | 
 | 		if (get_old_sigaction(&new_ka, act)) | 
 | 			return -EFAULT; | 
 | 	} | 
 |  | 
 | 	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); | 
 | 	if (!ret && oact) { | 
 | 		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || | 
 | 		    __put_user(to_user_ptr(old_ka.sa.sa_handler), | 
 | 			    &oact->sa_handler) || | 
 | 		    __put_user(to_user_ptr(old_ka.sa.sa_restorer), | 
 | 			    &oact->sa_restorer) || | 
 | 		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) || | 
 | 		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask)) | 
 | 			return -EFAULT; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * When we have signals to deliver, we set up on the | 
 |  * user stack, going down from the original stack pointer: | 
 |  *	a sigregs struct | 
 |  *	a sigcontext struct | 
 |  *	a gap of __SIGNAL_FRAMESIZE bytes | 
 |  * | 
 |  * Each of these things must be a multiple of 16 bytes in size. | 
 |  * | 
 |  */ | 
 | struct sigregs { | 
 | 	struct mcontext	mctx;		/* all the register values */ | 
 | 	/* | 
 | 	 * Programs using the rs6000/xcoff abi can save up to 19 gp | 
 | 	 * regs and 18 fp regs below sp before decrementing it. | 
 | 	 */ | 
 | 	int			abigap[56]; | 
 | }; | 
 |  | 
 | /* We use the mc_pad field for the signal return trampoline. */ | 
 | #define tramp	mc_pad | 
 |  | 
 | /* | 
 |  *  When we have rt signals to deliver, we set up on the | 
 |  *  user stack, going down from the original stack pointer: | 
 |  *	one rt_sigframe struct (siginfo + ucontext + ABI gap) | 
 |  *	a gap of __SIGNAL_FRAMESIZE+16 bytes | 
 |  *  (the +16 is to get the siginfo and ucontext in the same | 
 |  *  positions as in older kernels). | 
 |  * | 
 |  *  Each of these things must be a multiple of 16 bytes in size. | 
 |  * | 
 |  */ | 
 | struct rt_sigframe { | 
 | #ifdef CONFIG_PPC64 | 
 | 	compat_siginfo_t info; | 
 | #else | 
 | 	struct siginfo info; | 
 | #endif | 
 | 	struct ucontext	uc; | 
 | 	/* | 
 | 	 * Programs using the rs6000/xcoff abi can save up to 19 gp | 
 | 	 * regs and 18 fp regs below sp before decrementing it. | 
 | 	 */ | 
 | 	int			abigap[56]; | 
 | }; | 
 |  | 
 | /* | 
 |  * Save the current user registers on the user stack. | 
 |  * We only save the altivec/spe registers if the process has used | 
 |  * altivec/spe instructions at some point. | 
 |  */ | 
 | static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, | 
 | 		int sigret) | 
 | { | 
 | 	/* Make sure floating point registers are stored in regs */ | 
 | 	flush_fp_to_thread(current); | 
 |  | 
 | 	/* save general and floating-point registers */ | 
 | 	if (save_general_regs(regs, frame) || | 
 | 	    __copy_to_user(&frame->mc_fregs, current->thread.fpr, | 
 | 		    ELF_NFPREG * sizeof(double))) | 
 | 		return 1; | 
 |  | 
 | #ifdef CONFIG_ALTIVEC | 
 | 	/* save altivec registers */ | 
 | 	if (current->thread.used_vr) { | 
 | 		flush_altivec_to_thread(current); | 
 | 		if (__copy_to_user(&frame->mc_vregs, current->thread.vr, | 
 | 				   ELF_NVRREG * sizeof(vector128))) | 
 | 			return 1; | 
 | 		/* set MSR_VEC in the saved MSR value to indicate that | 
 | 		   frame->mc_vregs contains valid data */ | 
 | 		if (__put_user(regs->msr | MSR_VEC, &frame->mc_gregs[PT_MSR])) | 
 | 			return 1; | 
 | 	} | 
 | 	/* else assert((regs->msr & MSR_VEC) == 0) */ | 
 |  | 
 | 	/* We always copy to/from vrsave, it's 0 if we don't have or don't | 
 | 	 * use altivec. Since VSCR only contains 32 bits saved in the least | 
 | 	 * significant bits of a vector, we "cheat" and stuff VRSAVE in the | 
 | 	 * most significant bits of that same vector. --BenH | 
 | 	 */ | 
 | 	if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32])) | 
 | 		return 1; | 
 | #endif /* CONFIG_ALTIVEC */ | 
 |  | 
 | #ifdef CONFIG_SPE | 
 | 	/* save spe registers */ | 
 | 	if (current->thread.used_spe) { | 
 | 		flush_spe_to_thread(current); | 
 | 		if (__copy_to_user(&frame->mc_vregs, current->thread.evr, | 
 | 				   ELF_NEVRREG * sizeof(u32))) | 
 | 			return 1; | 
 | 		/* set MSR_SPE in the saved MSR value to indicate that | 
 | 		   frame->mc_vregs contains valid data */ | 
 | 		if (__put_user(regs->msr | MSR_SPE, &frame->mc_gregs[PT_MSR])) | 
 | 			return 1; | 
 | 	} | 
 | 	/* else assert((regs->msr & MSR_SPE) == 0) */ | 
 |  | 
 | 	/* We always copy to/from spefscr */ | 
 | 	if (__put_user(current->thread.spefscr, (u32 __user *)&frame->mc_vregs + ELF_NEVRREG)) | 
 | 		return 1; | 
 | #endif /* CONFIG_SPE */ | 
 |  | 
 | 	if (sigret) { | 
 | 		/* Set up the sigreturn trampoline: li r0,sigret; sc */ | 
 | 		if (__put_user(0x38000000UL + sigret, &frame->tramp[0]) | 
 | 		    || __put_user(0x44000002UL, &frame->tramp[1])) | 
 | 			return 1; | 
 | 		flush_icache_range((unsigned long) &frame->tramp[0], | 
 | 				   (unsigned long) &frame->tramp[2]); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Restore the current user register values from the user stack, | 
 |  * (except for MSR). | 
 |  */ | 
 | static long restore_user_regs(struct pt_regs *regs, | 
 | 			      struct mcontext __user *sr, int sig) | 
 | { | 
 | 	long err; | 
 | 	unsigned int save_r2 = 0; | 
 | 	unsigned long msr; | 
 |  | 
 | 	/* | 
 | 	 * restore general registers but not including MSR or SOFTE. Also | 
 | 	 * take care of keeping r2 (TLS) intact if not a signal | 
 | 	 */ | 
 | 	if (!sig) | 
 | 		save_r2 = (unsigned int)regs->gpr[2]; | 
 | 	err = restore_general_regs(regs, sr); | 
 | 	err |= __get_user(msr, &sr->mc_gregs[PT_MSR]); | 
 | 	if (!sig) | 
 | 		regs->gpr[2] = (unsigned long) save_r2; | 
 | 	if (err) | 
 | 		return 1; | 
 |  | 
 | 	/* if doing signal return, restore the previous little-endian mode */ | 
 | 	if (sig) | 
 | 		regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE); | 
 |  | 
 | 	/* | 
 | 	 * Do this before updating the thread state in | 
 | 	 * current->thread.fpr/vr/evr.  That way, if we get preempted | 
 | 	 * and another task grabs the FPU/Altivec/SPE, it won't be | 
 | 	 * tempted to save the current CPU state into the thread_struct | 
 | 	 * and corrupt what we are writing there. | 
 | 	 */ | 
 | 	discard_lazy_cpu_state(); | 
 |  | 
 | 	/* force the process to reload the FP registers from | 
 | 	   current->thread when it next does FP instructions */ | 
 | 	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1); | 
 | 	if (__copy_from_user(current->thread.fpr, &sr->mc_fregs, | 
 | 			     sizeof(sr->mc_fregs))) | 
 | 		return 1; | 
 |  | 
 | #ifdef CONFIG_ALTIVEC | 
 | 	/* force the process to reload the altivec registers from | 
 | 	   current->thread when it next does altivec instructions */ | 
 | 	regs->msr &= ~MSR_VEC; | 
 | 	if (msr & MSR_VEC) { | 
 | 		/* restore altivec registers from the stack */ | 
 | 		if (__copy_from_user(current->thread.vr, &sr->mc_vregs, | 
 | 				     sizeof(sr->mc_vregs))) | 
 | 			return 1; | 
 | 	} else if (current->thread.used_vr) | 
 | 		memset(current->thread.vr, 0, ELF_NVRREG * sizeof(vector128)); | 
 |  | 
 | 	/* Always get VRSAVE back */ | 
 | 	if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32])) | 
 | 		return 1; | 
 | #endif /* CONFIG_ALTIVEC */ | 
 |  | 
 | #ifdef CONFIG_SPE | 
 | 	/* force the process to reload the spe registers from | 
 | 	   current->thread when it next does spe instructions */ | 
 | 	regs->msr &= ~MSR_SPE; | 
 | 	if (msr & MSR_SPE) { | 
 | 		/* restore spe registers from the stack */ | 
 | 		if (__copy_from_user(current->thread.evr, &sr->mc_vregs, | 
 | 				     ELF_NEVRREG * sizeof(u32))) | 
 | 			return 1; | 
 | 	} else if (current->thread.used_spe) | 
 | 		memset(current->thread.evr, 0, ELF_NEVRREG * sizeof(u32)); | 
 |  | 
 | 	/* Always get SPEFSCR back */ | 
 | 	if (__get_user(current->thread.spefscr, (u32 __user *)&sr->mc_vregs + ELF_NEVRREG)) | 
 | 		return 1; | 
 | #endif /* CONFIG_SPE */ | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PPC64 | 
 | long compat_sys_rt_sigaction(int sig, const struct sigaction32 __user *act, | 
 | 		struct sigaction32 __user *oact, size_t sigsetsize) | 
 | { | 
 | 	struct k_sigaction new_ka, old_ka; | 
 | 	int ret; | 
 |  | 
 | 	/* XXX: Don't preclude handling different sized sigset_t's.  */ | 
 | 	if (sigsetsize != sizeof(compat_sigset_t)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (act) { | 
 | 		compat_uptr_t handler; | 
 |  | 
 | 		ret = get_user(handler, &act->sa_handler); | 
 | 		new_ka.sa.sa_handler = compat_ptr(handler); | 
 | 		ret |= get_sigset_t(&new_ka.sa.sa_mask, &act->sa_mask); | 
 | 		ret |= __get_user(new_ka.sa.sa_flags, &act->sa_flags); | 
 | 		if (ret) | 
 | 			return -EFAULT; | 
 | 	} | 
 |  | 
 | 	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); | 
 | 	if (!ret && oact) { | 
 | 		ret = put_user(to_user_ptr(old_ka.sa.sa_handler), &oact->sa_handler); | 
 | 		ret |= put_sigset_t(&oact->sa_mask, &old_ka.sa.sa_mask); | 
 | 		ret |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags); | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Note: it is necessary to treat how as an unsigned int, with the | 
 |  * corresponding cast to a signed int to insure that the proper | 
 |  * conversion (sign extension) between the register representation | 
 |  * of a signed int (msr in 32-bit mode) and the register representation | 
 |  * of a signed int (msr in 64-bit mode) is performed. | 
 |  */ | 
 | long compat_sys_rt_sigprocmask(u32 how, compat_sigset_t __user *set, | 
 | 		compat_sigset_t __user *oset, size_t sigsetsize) | 
 | { | 
 | 	sigset_t s; | 
 | 	sigset_t __user *up; | 
 | 	int ret; | 
 | 	mm_segment_t old_fs = get_fs(); | 
 |  | 
 | 	if (set) { | 
 | 		if (get_sigset_t(&s, set)) | 
 | 			return -EFAULT; | 
 | 	} | 
 |  | 
 | 	set_fs(KERNEL_DS); | 
 | 	/* This is valid because of the set_fs() */ | 
 | 	up = (sigset_t __user *) &s; | 
 | 	ret = sys_rt_sigprocmask((int)how, set ? up : NULL, oset ? up : NULL, | 
 | 				 sigsetsize); | 
 | 	set_fs(old_fs); | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	if (oset) { | 
 | 		if (put_sigset_t(oset, &s)) | 
 | 			return -EFAULT; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | long compat_sys_rt_sigpending(compat_sigset_t __user *set, compat_size_t sigsetsize) | 
 | { | 
 | 	sigset_t s; | 
 | 	int ret; | 
 | 	mm_segment_t old_fs = get_fs(); | 
 |  | 
 | 	set_fs(KERNEL_DS); | 
 | 	/* The __user pointer cast is valid because of the set_fs() */ | 
 | 	ret = sys_rt_sigpending((sigset_t __user *) &s, sigsetsize); | 
 | 	set_fs(old_fs); | 
 | 	if (!ret) { | 
 | 		if (put_sigset_t(set, &s)) | 
 | 			return -EFAULT; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	if (!access_ok (VERIFY_WRITE, d, sizeof(*d))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* If you change siginfo_t structure, please be sure | 
 | 	 * this code is fixed accordingly. | 
 | 	 * It should never copy any pad contained in the structure | 
 | 	 * to avoid security leaks, but must copy the generic | 
 | 	 * 3 ints plus the relevant union member. | 
 | 	 * This routine must convert siginfo from 64bit to 32bit as well | 
 | 	 * at the same time. | 
 | 	 */ | 
 | 	err = __put_user(s->si_signo, &d->si_signo); | 
 | 	err |= __put_user(s->si_errno, &d->si_errno); | 
 | 	err |= __put_user((short)s->si_code, &d->si_code); | 
 | 	if (s->si_code < 0) | 
 | 		err |= __copy_to_user(&d->_sifields._pad, &s->_sifields._pad, | 
 | 				      SI_PAD_SIZE32); | 
 | 	else switch(s->si_code >> 16) { | 
 | 	case __SI_CHLD >> 16: | 
 | 		err |= __put_user(s->si_pid, &d->si_pid); | 
 | 		err |= __put_user(s->si_uid, &d->si_uid); | 
 | 		err |= __put_user(s->si_utime, &d->si_utime); | 
 | 		err |= __put_user(s->si_stime, &d->si_stime); | 
 | 		err |= __put_user(s->si_status, &d->si_status); | 
 | 		break; | 
 | 	case __SI_FAULT >> 16: | 
 | 		err |= __put_user((unsigned int)(unsigned long)s->si_addr, | 
 | 				  &d->si_addr); | 
 | 		break; | 
 | 	case __SI_POLL >> 16: | 
 | 		err |= __put_user(s->si_band, &d->si_band); | 
 | 		err |= __put_user(s->si_fd, &d->si_fd); | 
 | 		break; | 
 | 	case __SI_TIMER >> 16: | 
 | 		err |= __put_user(s->si_tid, &d->si_tid); | 
 | 		err |= __put_user(s->si_overrun, &d->si_overrun); | 
 | 		err |= __put_user(s->si_int, &d->si_int); | 
 | 		break; | 
 | 	case __SI_RT >> 16: /* This is not generated by the kernel as of now.  */ | 
 | 	case __SI_MESGQ >> 16: | 
 | 		err |= __put_user(s->si_int, &d->si_int); | 
 | 		/* fallthrough */ | 
 | 	case __SI_KILL >> 16: | 
 | 	default: | 
 | 		err |= __put_user(s->si_pid, &d->si_pid); | 
 | 		err |= __put_user(s->si_uid, &d->si_uid); | 
 | 		break; | 
 | 	} | 
 | 	return err; | 
 | } | 
 |  | 
 | #define copy_siginfo_to_user	copy_siginfo_to_user32 | 
 |  | 
 | /* | 
 |  * Note: it is necessary to treat pid and sig as unsigned ints, with the | 
 |  * corresponding cast to a signed int to insure that the proper conversion | 
 |  * (sign extension) between the register representation of a signed int | 
 |  * (msr in 32-bit mode) and the register representation of a signed int | 
 |  * (msr in 64-bit mode) is performed. | 
 |  */ | 
 | long compat_sys_rt_sigqueueinfo(u32 pid, u32 sig, compat_siginfo_t __user *uinfo) | 
 | { | 
 | 	siginfo_t info; | 
 | 	int ret; | 
 | 	mm_segment_t old_fs = get_fs(); | 
 |  | 
 | 	if (copy_from_user (&info, uinfo, 3*sizeof(int)) || | 
 | 	    copy_from_user (info._sifields._pad, uinfo->_sifields._pad, SI_PAD_SIZE32)) | 
 | 		return -EFAULT; | 
 | 	set_fs (KERNEL_DS); | 
 | 	/* The __user pointer cast is valid becasuse of the set_fs() */ | 
 | 	ret = sys_rt_sigqueueinfo((int)pid, (int)sig, (siginfo_t __user *) &info); | 
 | 	set_fs (old_fs); | 
 | 	return ret; | 
 | } | 
 | /* | 
 |  *  Start Alternate signal stack support | 
 |  * | 
 |  *  System Calls | 
 |  *       sigaltatck               compat_sys_sigaltstack | 
 |  */ | 
 |  | 
 | int compat_sys_sigaltstack(u32 __new, u32 __old, int r5, | 
 | 		      int r6, int r7, int r8, struct pt_regs *regs) | 
 | { | 
 | 	stack_32_t __user * newstack = compat_ptr(__new); | 
 | 	stack_32_t __user * oldstack = compat_ptr(__old); | 
 | 	stack_t uss, uoss; | 
 | 	int ret; | 
 | 	mm_segment_t old_fs; | 
 | 	unsigned long sp; | 
 | 	compat_uptr_t ss_sp; | 
 |  | 
 | 	/* | 
 | 	 * set sp to the user stack on entry to the system call | 
 | 	 * the system call router sets R9 to the saved registers | 
 | 	 */ | 
 | 	sp = regs->gpr[1]; | 
 |  | 
 | 	/* Put new stack info in local 64 bit stack struct */ | 
 | 	if (newstack) { | 
 | 		if (get_user(ss_sp, &newstack->ss_sp) || | 
 | 		    __get_user(uss.ss_flags, &newstack->ss_flags) || | 
 | 		    __get_user(uss.ss_size, &newstack->ss_size)) | 
 | 			return -EFAULT; | 
 | 		uss.ss_sp = compat_ptr(ss_sp); | 
 | 	} | 
 |  | 
 | 	old_fs = get_fs(); | 
 | 	set_fs(KERNEL_DS); | 
 | 	/* The __user pointer casts are valid because of the set_fs() */ | 
 | 	ret = do_sigaltstack( | 
 | 		newstack ? (stack_t __user *) &uss : NULL, | 
 | 		oldstack ? (stack_t __user *) &uoss : NULL, | 
 | 		sp); | 
 | 	set_fs(old_fs); | 
 | 	/* Copy the stack information to the user output buffer */ | 
 | 	if (!ret && oldstack  && | 
 | 		(put_user(ptr_to_compat(uoss.ss_sp), &oldstack->ss_sp) || | 
 | 		 __put_user(uoss.ss_flags, &oldstack->ss_flags) || | 
 | 		 __put_user(uoss.ss_size, &oldstack->ss_size))) | 
 | 		return -EFAULT; | 
 | 	return ret; | 
 | } | 
 | #endif /* CONFIG_PPC64 */ | 
 |  | 
 |  | 
 | /* | 
 |  * Restore the user process's signal mask | 
 |  */ | 
 | #ifdef CONFIG_PPC64 | 
 | extern void restore_sigmask(sigset_t *set); | 
 | #else /* CONFIG_PPC64 */ | 
 | static void restore_sigmask(sigset_t *set) | 
 | { | 
 | 	sigdelsetmask(set, ~_BLOCKABLE); | 
 | 	spin_lock_irq(¤t->sighand->siglock); | 
 | 	current->blocked = *set; | 
 | 	recalc_sigpending(); | 
 | 	spin_unlock_irq(¤t->sighand->siglock); | 
 | } | 
 | #endif | 
 |  | 
 | /* | 
 |  * Set up a signal frame for a "real-time" signal handler | 
 |  * (one which gets siginfo). | 
 |  */ | 
 | static int handle_rt_signal(unsigned long sig, struct k_sigaction *ka, | 
 | 		siginfo_t *info, sigset_t *oldset, | 
 | 		struct pt_regs *regs, unsigned long newsp) | 
 | { | 
 | 	struct rt_sigframe __user *rt_sf; | 
 | 	struct mcontext __user *frame; | 
 | 	unsigned long origsp = newsp; | 
 |  | 
 | 	/* Set up Signal Frame */ | 
 | 	/* Put a Real Time Context onto stack */ | 
 | 	newsp -= sizeof(*rt_sf); | 
 | 	rt_sf = (struct rt_sigframe __user *)newsp; | 
 |  | 
 | 	/* create a stack frame for the caller of the handler */ | 
 | 	newsp -= __SIGNAL_FRAMESIZE + 16; | 
 |  | 
 | 	if (!access_ok(VERIFY_WRITE, (void __user *)newsp, origsp - newsp)) | 
 | 		goto badframe; | 
 |  | 
 | 	/* Put the siginfo & fill in most of the ucontext */ | 
 | 	if (copy_siginfo_to_user(&rt_sf->info, info) | 
 | 	    || __put_user(0, &rt_sf->uc.uc_flags) | 
 | 	    || __put_user(0, &rt_sf->uc.uc_link) | 
 | 	    || __put_user(current->sas_ss_sp, &rt_sf->uc.uc_stack.ss_sp) | 
 | 	    || __put_user(sas_ss_flags(regs->gpr[1]), | 
 | 			  &rt_sf->uc.uc_stack.ss_flags) | 
 | 	    || __put_user(current->sas_ss_size, &rt_sf->uc.uc_stack.ss_size) | 
 | 	    || __put_user(to_user_ptr(&rt_sf->uc.uc_mcontext), | 
 | 		    &rt_sf->uc.uc_regs) | 
 | 	    || put_sigset_t(&rt_sf->uc.uc_sigmask, oldset)) | 
 | 		goto badframe; | 
 |  | 
 | 	/* Save user registers on the stack */ | 
 | 	frame = &rt_sf->uc.uc_mcontext; | 
 | 	if (vdso32_rt_sigtramp && current->mm->context.vdso_base) { | 
 | 		if (save_user_regs(regs, frame, 0)) | 
 | 			goto badframe; | 
 | 		regs->link = current->mm->context.vdso_base + vdso32_rt_sigtramp; | 
 | 	} else { | 
 | 		if (save_user_regs(regs, frame, __NR_rt_sigreturn)) | 
 | 			goto badframe; | 
 | 		regs->link = (unsigned long) frame->tramp; | 
 | 	} | 
 |  | 
 | 	current->thread.fpscr.val = 0;	/* turn off all fp exceptions */ | 
 |  | 
 | 	if (put_user(regs->gpr[1], (u32 __user *)newsp)) | 
 | 		goto badframe; | 
 | 	regs->gpr[1] = newsp; | 
 | 	regs->gpr[3] = sig; | 
 | 	regs->gpr[4] = (unsigned long) &rt_sf->info; | 
 | 	regs->gpr[5] = (unsigned long) &rt_sf->uc; | 
 | 	regs->gpr[6] = (unsigned long) rt_sf; | 
 | 	regs->nip = (unsigned long) ka->sa.sa_handler; | 
 | 	/* enter the signal handler in big-endian mode */ | 
 | 	regs->msr &= ~MSR_LE; | 
 | 	regs->trap = 0; | 
 | 	return 1; | 
 |  | 
 | badframe: | 
 | #ifdef DEBUG_SIG | 
 | 	printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n", | 
 | 	       regs, frame, newsp); | 
 | #endif | 
 | 	force_sigsegv(sig, current); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int do_setcontext(struct ucontext __user *ucp, struct pt_regs *regs, int sig) | 
 | { | 
 | 	sigset_t set; | 
 | 	struct mcontext __user *mcp; | 
 |  | 
 | 	if (get_sigset_t(&set, &ucp->uc_sigmask)) | 
 | 		return -EFAULT; | 
 | #ifdef CONFIG_PPC64 | 
 | 	{ | 
 | 		u32 cmcp; | 
 |  | 
 | 		if (__get_user(cmcp, &ucp->uc_regs)) | 
 | 			return -EFAULT; | 
 | 		mcp = (struct mcontext __user *)(u64)cmcp; | 
 | 		/* no need to check access_ok(mcp), since mcp < 4GB */ | 
 | 	} | 
 | #else | 
 | 	if (__get_user(mcp, &ucp->uc_regs)) | 
 | 		return -EFAULT; | 
 | 	if (!access_ok(VERIFY_READ, mcp, sizeof(*mcp))) | 
 | 		return -EFAULT; | 
 | #endif | 
 | 	restore_sigmask(&set); | 
 | 	if (restore_user_regs(regs, mcp, sig)) | 
 | 		return -EFAULT; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | long sys_swapcontext(struct ucontext __user *old_ctx, | 
 | 		     struct ucontext __user *new_ctx, | 
 | 		     int ctx_size, int r6, int r7, int r8, struct pt_regs *regs) | 
 | { | 
 | 	unsigned char tmp; | 
 |  | 
 | 	/* Context size is for future use. Right now, we only make sure | 
 | 	 * we are passed something we understand | 
 | 	 */ | 
 | 	if (ctx_size < sizeof(struct ucontext)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (old_ctx != NULL) { | 
 | 		struct mcontext __user *mctx; | 
 |  | 
 | 		/* | 
 | 		 * old_ctx might not be 16-byte aligned, in which | 
 | 		 * case old_ctx->uc_mcontext won't be either. | 
 | 		 * Because we have the old_ctx->uc_pad2 field | 
 | 		 * before old_ctx->uc_mcontext, we need to round down | 
 | 		 * from &old_ctx->uc_mcontext to a 16-byte boundary. | 
 | 		 */ | 
 | 		mctx = (struct mcontext __user *) | 
 | 			((unsigned long) &old_ctx->uc_mcontext & ~0xfUL); | 
 | 		if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx)) | 
 | 		    || save_user_regs(regs, mctx, 0) | 
 | 		    || put_sigset_t(&old_ctx->uc_sigmask, ¤t->blocked) | 
 | 		    || __put_user(to_user_ptr(mctx), &old_ctx->uc_regs)) | 
 | 			return -EFAULT; | 
 | 	} | 
 | 	if (new_ctx == NULL) | 
 | 		return 0; | 
 | 	if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx)) | 
 | 	    || __get_user(tmp, (u8 __user *) new_ctx) | 
 | 	    || __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1)) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* | 
 | 	 * If we get a fault copying the context into the kernel's | 
 | 	 * image of the user's registers, we can't just return -EFAULT | 
 | 	 * because the user's registers will be corrupted.  For instance | 
 | 	 * the NIP value may have been updated but not some of the | 
 | 	 * other registers.  Given that we have done the access_ok | 
 | 	 * and successfully read the first and last bytes of the region | 
 | 	 * above, this should only happen in an out-of-memory situation | 
 | 	 * or if another thread unmaps the region containing the context. | 
 | 	 * We kill the task with a SIGSEGV in this situation. | 
 | 	 */ | 
 | 	if (do_setcontext(new_ctx, regs, 0)) | 
 | 		do_exit(SIGSEGV); | 
 |  | 
 | 	set_thread_flag(TIF_RESTOREALL); | 
 | 	return 0; | 
 | } | 
 |  | 
 | long sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, | 
 | 		     struct pt_regs *regs) | 
 | { | 
 | 	struct rt_sigframe __user *rt_sf; | 
 |  | 
 | 	/* Always make any pending restarted system calls return -EINTR */ | 
 | 	current_thread_info()->restart_block.fn = do_no_restart_syscall; | 
 |  | 
 | 	rt_sf = (struct rt_sigframe __user *) | 
 | 		(regs->gpr[1] + __SIGNAL_FRAMESIZE + 16); | 
 | 	if (!access_ok(VERIFY_READ, rt_sf, sizeof(*rt_sf))) | 
 | 		goto bad; | 
 | 	if (do_setcontext(&rt_sf->uc, regs, 1)) | 
 | 		goto bad; | 
 |  | 
 | 	/* | 
 | 	 * It's not clear whether or why it is desirable to save the | 
 | 	 * sigaltstack setting on signal delivery and restore it on | 
 | 	 * signal return.  But other architectures do this and we have | 
 | 	 * always done it up until now so it is probably better not to | 
 | 	 * change it.  -- paulus | 
 | 	 */ | 
 | #ifdef CONFIG_PPC64 | 
 | 	/* | 
 | 	 * We use the compat_sys_ version that does the 32/64 bits conversion | 
 | 	 * and takes userland pointer directly. What about error checking ? | 
 | 	 * nobody does any... | 
 | 	 */ | 
 | 	compat_sys_sigaltstack((u32)(u64)&rt_sf->uc.uc_stack, 0, 0, 0, 0, 0, regs); | 
 | #else | 
 | 	do_sigaltstack(&rt_sf->uc.uc_stack, NULL, regs->gpr[1]); | 
 | #endif | 
 | 	set_thread_flag(TIF_RESTOREALL); | 
 | 	return 0; | 
 |  | 
 |  bad: | 
 | 	force_sig(SIGSEGV, current); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PPC32 | 
 | int sys_debug_setcontext(struct ucontext __user *ctx, | 
 | 			 int ndbg, struct sig_dbg_op __user *dbg, | 
 | 			 int r6, int r7, int r8, | 
 | 			 struct pt_regs *regs) | 
 | { | 
 | 	struct sig_dbg_op op; | 
 | 	int i; | 
 | 	unsigned char tmp; | 
 | 	unsigned long new_msr = regs->msr; | 
 | #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) | 
 | 	unsigned long new_dbcr0 = current->thread.dbcr0; | 
 | #endif | 
 |  | 
 | 	for (i=0; i<ndbg; i++) { | 
 | 		if (copy_from_user(&op, dbg + i, sizeof(op))) | 
 | 			return -EFAULT; | 
 | 		switch (op.dbg_type) { | 
 | 		case SIG_DBG_SINGLE_STEPPING: | 
 | #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) | 
 | 			if (op.dbg_value) { | 
 | 				new_msr |= MSR_DE; | 
 | 				new_dbcr0 |= (DBCR0_IDM | DBCR0_IC); | 
 | 			} else { | 
 | 				new_msr &= ~MSR_DE; | 
 | 				new_dbcr0 &= ~(DBCR0_IDM | DBCR0_IC); | 
 | 			} | 
 | #else | 
 | 			if (op.dbg_value) | 
 | 				new_msr |= MSR_SE; | 
 | 			else | 
 | 				new_msr &= ~MSR_SE; | 
 | #endif | 
 | 			break; | 
 | 		case SIG_DBG_BRANCH_TRACING: | 
 | #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) | 
 | 			return -EINVAL; | 
 | #else | 
 | 			if (op.dbg_value) | 
 | 				new_msr |= MSR_BE; | 
 | 			else | 
 | 				new_msr &= ~MSR_BE; | 
 | #endif | 
 | 			break; | 
 |  | 
 | 		default: | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* We wait until here to actually install the values in the | 
 | 	   registers so if we fail in the above loop, it will not | 
 | 	   affect the contents of these registers.  After this point, | 
 | 	   failure is a problem, anyway, and it's very unlikely unless | 
 | 	   the user is really doing something wrong. */ | 
 | 	regs->msr = new_msr; | 
 | #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) | 
 | 	current->thread.dbcr0 = new_dbcr0; | 
 | #endif | 
 |  | 
 | 	if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)) | 
 | 	    || __get_user(tmp, (u8 __user *) ctx) | 
 | 	    || __get_user(tmp, (u8 __user *) (ctx + 1) - 1)) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* | 
 | 	 * If we get a fault copying the context into the kernel's | 
 | 	 * image of the user's registers, we can't just return -EFAULT | 
 | 	 * because the user's registers will be corrupted.  For instance | 
 | 	 * the NIP value may have been updated but not some of the | 
 | 	 * other registers.  Given that we have done the access_ok | 
 | 	 * and successfully read the first and last bytes of the region | 
 | 	 * above, this should only happen in an out-of-memory situation | 
 | 	 * or if another thread unmaps the region containing the context. | 
 | 	 * We kill the task with a SIGSEGV in this situation. | 
 | 	 */ | 
 | 	if (do_setcontext(ctx, regs, 1)) { | 
 | 		force_sig(SIGSEGV, current); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * It's not clear whether or why it is desirable to save the | 
 | 	 * sigaltstack setting on signal delivery and restore it on | 
 | 	 * signal return.  But other architectures do this and we have | 
 | 	 * always done it up until now so it is probably better not to | 
 | 	 * change it.  -- paulus | 
 | 	 */ | 
 | 	do_sigaltstack(&ctx->uc_stack, NULL, regs->gpr[1]); | 
 |  | 
 | 	set_thread_flag(TIF_RESTOREALL); | 
 |  out: | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | /* | 
 |  * OK, we're invoking a handler | 
 |  */ | 
 | static int handle_signal(unsigned long sig, struct k_sigaction *ka, | 
 | 		siginfo_t *info, sigset_t *oldset, struct pt_regs *regs, | 
 | 		unsigned long newsp) | 
 | { | 
 | 	struct sigcontext __user *sc; | 
 | 	struct sigregs __user *frame; | 
 | 	unsigned long origsp = newsp; | 
 |  | 
 | 	/* Set up Signal Frame */ | 
 | 	newsp -= sizeof(struct sigregs); | 
 | 	frame = (struct sigregs __user *) newsp; | 
 |  | 
 | 	/* Put a sigcontext on the stack */ | 
 | 	newsp -= sizeof(*sc); | 
 | 	sc = (struct sigcontext __user *) newsp; | 
 |  | 
 | 	/* create a stack frame for the caller of the handler */ | 
 | 	newsp -= __SIGNAL_FRAMESIZE; | 
 |  | 
 | 	if (!access_ok(VERIFY_WRITE, (void __user *) newsp, origsp - newsp)) | 
 | 		goto badframe; | 
 |  | 
 | #if _NSIG != 64 | 
 | #error "Please adjust handle_signal()" | 
 | #endif | 
 | 	if (__put_user(to_user_ptr(ka->sa.sa_handler), &sc->handler) | 
 | 	    || __put_user(oldset->sig[0], &sc->oldmask) | 
 | #ifdef CONFIG_PPC64 | 
 | 	    || __put_user((oldset->sig[0] >> 32), &sc->_unused[3]) | 
 | #else | 
 | 	    || __put_user(oldset->sig[1], &sc->_unused[3]) | 
 | #endif | 
 | 	    || __put_user(to_user_ptr(frame), &sc->regs) | 
 | 	    || __put_user(sig, &sc->signal)) | 
 | 		goto badframe; | 
 |  | 
 | 	if (vdso32_sigtramp && current->mm->context.vdso_base) { | 
 | 		if (save_user_regs(regs, &frame->mctx, 0)) | 
 | 			goto badframe; | 
 | 		regs->link = current->mm->context.vdso_base + vdso32_sigtramp; | 
 | 	} else { | 
 | 		if (save_user_regs(regs, &frame->mctx, __NR_sigreturn)) | 
 | 			goto badframe; | 
 | 		regs->link = (unsigned long) frame->mctx.tramp; | 
 | 	} | 
 |  | 
 | 	current->thread.fpscr.val = 0;	/* turn off all fp exceptions */ | 
 |  | 
 | 	if (put_user(regs->gpr[1], (u32 __user *)newsp)) | 
 | 		goto badframe; | 
 | 	regs->gpr[1] = newsp; | 
 | 	regs->gpr[3] = sig; | 
 | 	regs->gpr[4] = (unsigned long) sc; | 
 | 	regs->nip = (unsigned long) ka->sa.sa_handler; | 
 | 	/* enter the signal handler in big-endian mode */ | 
 | 	regs->msr &= ~MSR_LE; | 
 | 	regs->trap = 0; | 
 |  | 
 | 	return 1; | 
 |  | 
 | badframe: | 
 | #ifdef DEBUG_SIG | 
 | 	printk("badframe in handle_signal, regs=%p frame=%p newsp=%lx\n", | 
 | 	       regs, frame, newsp); | 
 | #endif | 
 | 	force_sigsegv(sig, current); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Do a signal return; undo the signal stack. | 
 |  */ | 
 | long sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, | 
 | 		       struct pt_regs *regs) | 
 | { | 
 | 	struct sigcontext __user *sc; | 
 | 	struct sigcontext sigctx; | 
 | 	struct mcontext __user *sr; | 
 | 	sigset_t set; | 
 |  | 
 | 	/* Always make any pending restarted system calls return -EINTR */ | 
 | 	current_thread_info()->restart_block.fn = do_no_restart_syscall; | 
 |  | 
 | 	sc = (struct sigcontext __user *)(regs->gpr[1] + __SIGNAL_FRAMESIZE); | 
 | 	if (copy_from_user(&sigctx, sc, sizeof(sigctx))) | 
 | 		goto badframe; | 
 |  | 
 | #ifdef CONFIG_PPC64 | 
 | 	/* | 
 | 	 * Note that PPC32 puts the upper 32 bits of the sigmask in the | 
 | 	 * unused part of the signal stackframe | 
 | 	 */ | 
 | 	set.sig[0] = sigctx.oldmask + ((long)(sigctx._unused[3]) << 32); | 
 | #else | 
 | 	set.sig[0] = sigctx.oldmask; | 
 | 	set.sig[1] = sigctx._unused[3]; | 
 | #endif | 
 | 	restore_sigmask(&set); | 
 |  | 
 | 	sr = (struct mcontext __user *)from_user_ptr(sigctx.regs); | 
 | 	if (!access_ok(VERIFY_READ, sr, sizeof(*sr)) | 
 | 	    || restore_user_regs(regs, sr, 1)) | 
 | 		goto badframe; | 
 |  | 
 | 	set_thread_flag(TIF_RESTOREALL); | 
 | 	return 0; | 
 |  | 
 | badframe: | 
 | 	force_sig(SIGSEGV, current); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Note that 'init' is a special process: it doesn't get signals it doesn't | 
 |  * want to handle. Thus you cannot kill init even with a SIGKILL even by | 
 |  * mistake. | 
 |  */ | 
 | int do_signal(sigset_t *oldset, struct pt_regs *regs) | 
 | { | 
 | 	siginfo_t info; | 
 | 	struct k_sigaction ka; | 
 | 	unsigned int newsp; | 
 | 	int signr, ret; | 
 |  | 
 | #ifdef CONFIG_PPC32 | 
 | 	if (try_to_freeze()) { | 
 | 		signr = 0; | 
 | 		if (!signal_pending(current)) | 
 | 			goto no_signal; | 
 | 	} | 
 | #endif | 
 |  | 
 | 	if (test_thread_flag(TIF_RESTORE_SIGMASK)) | 
 | 		oldset = ¤t->saved_sigmask; | 
 | 	else if (!oldset) | 
 | 		oldset = ¤t->blocked; | 
 |  | 
 | 	signr = get_signal_to_deliver(&info, &ka, regs, NULL); | 
 | #ifdef CONFIG_PPC32 | 
 | no_signal: | 
 | #endif | 
 | 	if (TRAP(regs) == 0x0C00		/* System Call! */ | 
 | 	    && regs->ccr & 0x10000000		/* error signalled */ | 
 | 	    && ((ret = regs->gpr[3]) == ERESTARTSYS | 
 | 		|| ret == ERESTARTNOHAND || ret == ERESTARTNOINTR | 
 | 		|| ret == ERESTART_RESTARTBLOCK)) { | 
 |  | 
 | 		if (signr > 0 | 
 | 		    && (ret == ERESTARTNOHAND || ret == ERESTART_RESTARTBLOCK | 
 | 			|| (ret == ERESTARTSYS | 
 | 			    && !(ka.sa.sa_flags & SA_RESTART)))) { | 
 | 			/* make the system call return an EINTR error */ | 
 | 			regs->result = -EINTR; | 
 | 			regs->gpr[3] = EINTR; | 
 | 			/* note that the cr0.SO bit is already set */ | 
 | 		} else { | 
 | 			regs->nip -= 4;	/* Back up & retry system call */ | 
 | 			regs->result = 0; | 
 | 			regs->trap = 0; | 
 | 			if (ret == ERESTART_RESTARTBLOCK) | 
 | 				regs->gpr[0] = __NR_restart_syscall; | 
 | 			else | 
 | 				regs->gpr[3] = regs->orig_gpr3; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (signr == 0) { | 
 | 		/* No signal to deliver -- put the saved sigmask back */ | 
 | 		if (test_thread_flag(TIF_RESTORE_SIGMASK)) { | 
 | 			clear_thread_flag(TIF_RESTORE_SIGMASK); | 
 | 			sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); | 
 | 		} | 
 | 		return 0;		/* no signals delivered */ | 
 | 	} | 
 |  | 
 | 	if ((ka.sa.sa_flags & SA_ONSTACK) && current->sas_ss_size | 
 | 	    && !on_sig_stack(regs->gpr[1])) | 
 | 		newsp = current->sas_ss_sp + current->sas_ss_size; | 
 | 	else | 
 | 		newsp = regs->gpr[1]; | 
 | 	newsp &= ~0xfUL; | 
 |  | 
 | #ifdef CONFIG_PPC64 | 
 | 	/* | 
 | 	 * Reenable the DABR before delivering the signal to | 
 | 	 * user space. The DABR will have been cleared if it | 
 | 	 * triggered inside the kernel. | 
 | 	 */ | 
 | 	if (current->thread.dabr) | 
 | 		set_dabr(current->thread.dabr); | 
 | #endif | 
 |  | 
 | 	/* Whee!  Actually deliver the signal.  */ | 
 | 	if (ka.sa.sa_flags & SA_SIGINFO) | 
 | 		ret = handle_rt_signal(signr, &ka, &info, oldset, regs, newsp); | 
 | 	else | 
 | 		ret = handle_signal(signr, &ka, &info, oldset, regs, newsp); | 
 |  | 
 | 	if (ret) { | 
 | 		spin_lock_irq(¤t->sighand->siglock); | 
 | 		sigorsets(¤t->blocked, ¤t->blocked, | 
 | 			  &ka.sa.sa_mask); | 
 | 		if (!(ka.sa.sa_flags & SA_NODEFER)) | 
 | 			sigaddset(¤t->blocked, signr); | 
 | 		recalc_sigpending(); | 
 | 		spin_unlock_irq(¤t->sighand->siglock); | 
 | 		/* A signal was successfully delivered; the saved sigmask is in | 
 | 		   its frame, and we can clear the TIF_RESTORE_SIGMASK flag */ | 
 | 		if (test_thread_flag(TIF_RESTORE_SIGMASK)) | 
 | 			clear_thread_flag(TIF_RESTORE_SIGMASK); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } |