|  | /******************************************************************************* | 
|  | * | 
|  | * Module Name: rscalc - Calculate stream and list lengths | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | /* | 
|  | * Copyright (C) 2000 - 2005, R. Byron Moore | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions, and the following disclaimer, | 
|  | *    without modification. | 
|  | * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
|  | *    substantially similar to the "NO WARRANTY" disclaimer below | 
|  | *    ("Disclaimer") and any redistribution must be conditioned upon | 
|  | *    including a substantially similar Disclaimer requirement for further | 
|  | *    binary redistribution. | 
|  | * 3. Neither the names of the above-listed copyright holders nor the names | 
|  | *    of any contributors may be used to endorse or promote products derived | 
|  | *    from this software without specific prior written permission. | 
|  | * | 
|  | * Alternatively, this software may be distributed under the terms of the | 
|  | * GNU General Public License ("GPL") version 2 as published by the Free | 
|  | * Software Foundation. | 
|  | * | 
|  | * NO WARRANTY | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
|  | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
|  | * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
|  | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
|  | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
|  | * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
|  | * POSSIBILITY OF SUCH DAMAGES. | 
|  | */ | 
|  |  | 
|  |  | 
|  | #include <acpi/acpi.h> | 
|  | #include <acpi/acresrc.h> | 
|  | #include <acpi/amlcode.h> | 
|  | #include <acpi/acnamesp.h> | 
|  |  | 
|  | #define _COMPONENT          ACPI_RESOURCES | 
|  | ACPI_MODULE_NAME    ("rscalc") | 
|  |  | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_rs_get_byte_stream_length | 
|  | * | 
|  | * PARAMETERS:  linked_list         - Pointer to the resource linked list | 
|  | *              size_needed         - u32 pointer of the size buffer needed | 
|  | *                                    to properly return the parsed data | 
|  | * | 
|  | * RETURN:      Status | 
|  | * | 
|  | * DESCRIPTION: Takes the resource byte stream and parses it once, calculating | 
|  | *              the size buffer needed to hold the linked list that conveys | 
|  | *              the resource data. | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | acpi_status | 
|  | acpi_rs_get_byte_stream_length ( | 
|  | struct acpi_resource            *linked_list, | 
|  | acpi_size                       *size_needed) | 
|  | { | 
|  | acpi_size                       byte_stream_size_needed = 0; | 
|  | acpi_size                       segment_size; | 
|  | u8                              done = FALSE; | 
|  |  | 
|  |  | 
|  | ACPI_FUNCTION_TRACE ("rs_get_byte_stream_length"); | 
|  |  | 
|  |  | 
|  | while (!done) { | 
|  | /* Init the variable that will hold the size to add to the total. */ | 
|  |  | 
|  | segment_size = 0; | 
|  |  | 
|  | switch (linked_list->id) { | 
|  | case ACPI_RSTYPE_IRQ: | 
|  | /* | 
|  | * IRQ Resource | 
|  | * For an IRQ Resource, Byte 3, although optional, will always be | 
|  | * created - it holds IRQ information. | 
|  | */ | 
|  | segment_size = 4; | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_DMA: | 
|  | /* | 
|  | * DMA Resource | 
|  | * For this resource the size is static | 
|  | */ | 
|  | segment_size = 3; | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_START_DPF: | 
|  | /* | 
|  | * Start Dependent Functions Resource | 
|  | * For a start_dependent_functions Resource, Byte 1, although | 
|  | * optional, will always be created. | 
|  | */ | 
|  | segment_size = 2; | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_END_DPF: | 
|  | /* | 
|  | * End Dependent Functions Resource | 
|  | * For this resource the size is static | 
|  | */ | 
|  | segment_size = 1; | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_IO: | 
|  | /* | 
|  | * IO Port Resource | 
|  | * For this resource the size is static | 
|  | */ | 
|  | segment_size = 8; | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_FIXED_IO: | 
|  | /* | 
|  | * Fixed IO Port Resource | 
|  | * For this resource the size is static | 
|  | */ | 
|  | segment_size = 4; | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_VENDOR: | 
|  | /* | 
|  | * Vendor Defined Resource | 
|  | * For a Vendor Specific resource, if the Length is between 1 and 7 | 
|  | * it will be created as a Small Resource data type, otherwise it | 
|  | * is a Large Resource data type. | 
|  | */ | 
|  | if (linked_list->data.vendor_specific.length > 7) { | 
|  | segment_size = 3; | 
|  | } | 
|  | else { | 
|  | segment_size = 1; | 
|  | } | 
|  | segment_size += linked_list->data.vendor_specific.length; | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_END_TAG: | 
|  | /* | 
|  | * End Tag | 
|  | * For this resource the size is static | 
|  | */ | 
|  | segment_size = 2; | 
|  | done = TRUE; | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_MEM24: | 
|  | /* | 
|  | * 24-Bit Memory Resource | 
|  | * For this resource the size is static | 
|  | */ | 
|  | segment_size = 12; | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_MEM32: | 
|  | /* | 
|  | * 32-Bit Memory Range Resource | 
|  | * For this resource the size is static | 
|  | */ | 
|  | segment_size = 20; | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_FIXED_MEM32: | 
|  | /* | 
|  | * 32-Bit Fixed Memory Resource | 
|  | * For this resource the size is static | 
|  | */ | 
|  | segment_size = 12; | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_ADDRESS16: | 
|  | /* | 
|  | * 16-Bit Address Resource | 
|  | * The base size of this byte stream is 16. If a Resource Source | 
|  | * string is not NULL, add 1 for the Index + the length of the null | 
|  | * terminated string Resource Source + 1 for the null. | 
|  | */ | 
|  | segment_size = 16; | 
|  |  | 
|  | if (linked_list->data.address16.resource_source.string_ptr) { | 
|  | segment_size += | 
|  | linked_list->data.address16.resource_source.string_length; | 
|  | segment_size++; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_ADDRESS32: | 
|  | /* | 
|  | * 32-Bit Address Resource | 
|  | * The base size of this byte stream is 26. If a Resource | 
|  | * Source string is not NULL, add 1 for the Index + the | 
|  | * length of the null terminated string Resource Source + | 
|  | * 1 for the null. | 
|  | */ | 
|  | segment_size = 26; | 
|  |  | 
|  | if (linked_list->data.address32.resource_source.string_ptr) { | 
|  | segment_size += | 
|  | linked_list->data.address32.resource_source.string_length; | 
|  | segment_size++; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_ADDRESS64: | 
|  | /* | 
|  | * 64-Bit Address Resource | 
|  | * The base size of this byte stream is 46. If a resource_source | 
|  | * string is not NULL, add 1 for the Index + the length of the null | 
|  | * terminated string Resource Source + 1 for the null. | 
|  | */ | 
|  | segment_size = 46; | 
|  |  | 
|  | if (linked_list->data.address64.resource_source.string_ptr) { | 
|  | segment_size += | 
|  | linked_list->data.address64.resource_source.string_length; | 
|  | segment_size++; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case ACPI_RSTYPE_EXT_IRQ: | 
|  | /* | 
|  | * Extended IRQ Resource | 
|  | * The base size of this byte stream is 9. This is for an Interrupt | 
|  | * table length of 1.  For each additional interrupt, add 4. | 
|  | * If a Resource Source string is not NULL, add 1 for the | 
|  | * Index + the length of the null terminated string | 
|  | * Resource Source + 1 for the null. | 
|  | */ | 
|  | segment_size = 9 + (((acpi_size) | 
|  | linked_list->data.extended_irq.number_of_interrupts - 1) * 4); | 
|  |  | 
|  | if (linked_list->data.extended_irq.resource_source.string_ptr) { | 
|  | segment_size += | 
|  | linked_list->data.extended_irq.resource_source.string_length; | 
|  | segment_size++; | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  |  | 
|  | /* If we get here, everything is out of sync, exit with error */ | 
|  |  | 
|  | return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE); | 
|  |  | 
|  | } /* switch (linked_list->Id) */ | 
|  |  | 
|  | /* Update the total */ | 
|  |  | 
|  | byte_stream_size_needed += segment_size; | 
|  |  | 
|  | /* Point to the next object */ | 
|  |  | 
|  | linked_list = ACPI_PTR_ADD (struct acpi_resource, | 
|  | linked_list, linked_list->length); | 
|  | } | 
|  |  | 
|  | /* This is the data the caller needs */ | 
|  |  | 
|  | *size_needed = byte_stream_size_needed; | 
|  | return_ACPI_STATUS (AE_OK); | 
|  | } | 
|  |  | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_rs_get_list_length | 
|  | * | 
|  | * PARAMETERS:  byte_stream_buffer      - Pointer to the resource byte stream | 
|  | *              byte_stream_buffer_length - Size of byte_stream_buffer | 
|  | *              size_needed             - u32 pointer of the size buffer | 
|  | *                                        needed to properly return the | 
|  | *                                        parsed data | 
|  | * | 
|  | * RETURN:      Status | 
|  | * | 
|  | * DESCRIPTION: Takes the resource byte stream and parses it once, calculating | 
|  | *              the size buffer needed to hold the linked list that conveys | 
|  | *              the resource data. | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | acpi_status | 
|  | acpi_rs_get_list_length ( | 
|  | u8                              *byte_stream_buffer, | 
|  | u32                             byte_stream_buffer_length, | 
|  | acpi_size                       *size_needed) | 
|  | { | 
|  | u32                             buffer_size = 0; | 
|  | u32                             bytes_parsed = 0; | 
|  | u8                              number_of_interrupts = 0; | 
|  | u8                              number_of_channels = 0; | 
|  | u8                              resource_type; | 
|  | u32                             structure_size; | 
|  | u32                             bytes_consumed; | 
|  | u8                              *buffer; | 
|  | u8                              temp8; | 
|  | u16                             temp16; | 
|  | u8                              index; | 
|  | u8                              additional_bytes; | 
|  |  | 
|  |  | 
|  | ACPI_FUNCTION_TRACE ("rs_get_list_length"); | 
|  |  | 
|  |  | 
|  | while (bytes_parsed < byte_stream_buffer_length) { | 
|  | /* The next byte in the stream is the resource type */ | 
|  |  | 
|  | resource_type = acpi_rs_get_resource_type (*byte_stream_buffer); | 
|  |  | 
|  | switch (resource_type) { | 
|  | case ACPI_RDESC_TYPE_MEMORY_24: | 
|  | /* | 
|  | * 24-Bit Memory Resource | 
|  | */ | 
|  | bytes_consumed = 12; | 
|  |  | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_mem24); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_LARGE_VENDOR: | 
|  | /* | 
|  | * Vendor Defined Resource | 
|  | */ | 
|  | buffer = byte_stream_buffer; | 
|  | ++buffer; | 
|  |  | 
|  | ACPI_MOVE_16_TO_16 (&temp16, buffer); | 
|  | bytes_consumed = temp16 + 3; | 
|  |  | 
|  | /* Ensure a 32-bit boundary for the structure */ | 
|  |  | 
|  | temp16 = (u16) ACPI_ROUND_UP_to_32_bITS (temp16); | 
|  |  | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_vendor) + | 
|  | (temp16 * sizeof (u8)); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_MEMORY_32: | 
|  | /* | 
|  | * 32-Bit Memory Range Resource | 
|  | */ | 
|  | bytes_consumed = 20; | 
|  |  | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_mem32); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_FIXED_MEMORY_32: | 
|  | /* | 
|  | * 32-Bit Fixed Memory Resource | 
|  | */ | 
|  | bytes_consumed = 12; | 
|  |  | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_fixed_mem32); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE: | 
|  | /* | 
|  | * 64-Bit Address Resource | 
|  | */ | 
|  | buffer = byte_stream_buffer; | 
|  |  | 
|  | ++buffer; | 
|  | ACPI_MOVE_16_TO_16 (&temp16, buffer); | 
|  |  | 
|  | bytes_consumed = temp16 + 3; | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address64); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_QWORD_ADDRESS_SPACE: | 
|  | /* | 
|  | * 64-Bit Address Resource | 
|  | */ | 
|  | buffer = byte_stream_buffer; | 
|  |  | 
|  | ++buffer; | 
|  | ACPI_MOVE_16_TO_16 (&temp16, buffer); | 
|  |  | 
|  | bytes_consumed = temp16 + 3; | 
|  |  | 
|  | /* | 
|  | * Resource Source Index and Resource Source are optional elements. | 
|  | * Check the length of the Bytestream.  If it is greater than 43, | 
|  | * that means that an Index exists and is followed by a null | 
|  | * terminated string.  Therefore, set the temp variable to the | 
|  | * length minus the minimum byte stream length plus the byte for | 
|  | * the Index to determine the size of the NULL terminated string. | 
|  | */ | 
|  | if (43 < temp16) { | 
|  | temp8 = (u8) (temp16 - 44); | 
|  | } | 
|  | else { | 
|  | temp8 = 0; | 
|  | } | 
|  |  | 
|  | /* Ensure a 64-bit boundary for the structure */ | 
|  |  | 
|  | temp8 = (u8) ACPI_ROUND_UP_to_64_bITS (temp8); | 
|  |  | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address64) + | 
|  | (temp8 * sizeof (u8)); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_DWORD_ADDRESS_SPACE: | 
|  | /* | 
|  | * 32-Bit Address Resource | 
|  | */ | 
|  | buffer = byte_stream_buffer; | 
|  |  | 
|  | ++buffer; | 
|  | ACPI_MOVE_16_TO_16 (&temp16, buffer); | 
|  |  | 
|  | bytes_consumed = temp16 + 3; | 
|  |  | 
|  | /* | 
|  | * Resource Source Index and Resource Source are optional elements. | 
|  | * Check the length of the Bytestream.  If it is greater than 23, | 
|  | * that means that an Index exists and is followed by a null | 
|  | * terminated string.  Therefore, set the temp variable to the | 
|  | * length minus the minimum byte stream length plus the byte for | 
|  | * the Index to determine the size of the NULL terminated string. | 
|  | */ | 
|  | if (23 < temp16) { | 
|  | temp8 = (u8) (temp16 - 24); | 
|  | } | 
|  | else { | 
|  | temp8 = 0; | 
|  | } | 
|  |  | 
|  | /* Ensure a 32-bit boundary for the structure */ | 
|  |  | 
|  | temp8 = (u8) ACPI_ROUND_UP_to_32_bITS (temp8); | 
|  |  | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address32) + | 
|  | (temp8 * sizeof (u8)); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_WORD_ADDRESS_SPACE: | 
|  | /* | 
|  | * 16-Bit Address Resource | 
|  | */ | 
|  | buffer = byte_stream_buffer; | 
|  |  | 
|  | ++buffer; | 
|  | ACPI_MOVE_16_TO_16 (&temp16, buffer); | 
|  |  | 
|  | bytes_consumed = temp16 + 3; | 
|  |  | 
|  | /* | 
|  | * Resource Source Index and Resource Source are optional elements. | 
|  | * Check the length of the Bytestream.  If it is greater than 13, | 
|  | * that means that an Index exists and is followed by a null | 
|  | * terminated string.  Therefore, set the temp variable to the | 
|  | * length minus the minimum byte stream length plus the byte for | 
|  | * the Index to determine the size of the NULL terminated string. | 
|  | */ | 
|  | if (13 < temp16) { | 
|  | temp8 = (u8) (temp16 - 14); | 
|  | } | 
|  | else { | 
|  | temp8 = 0; | 
|  | } | 
|  |  | 
|  | /* Ensure a 32-bit boundary for the structure */ | 
|  |  | 
|  | temp8 = (u8) ACPI_ROUND_UP_to_32_bITS (temp8); | 
|  |  | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address16) + | 
|  | (temp8 * sizeof (u8)); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_EXTENDED_XRUPT: | 
|  | /* | 
|  | * Extended IRQ | 
|  | */ | 
|  | buffer = byte_stream_buffer; | 
|  |  | 
|  | ++buffer; | 
|  | ACPI_MOVE_16_TO_16 (&temp16, buffer); | 
|  |  | 
|  | bytes_consumed = temp16 + 3; | 
|  |  | 
|  | /* | 
|  | * Point past the length field and the Interrupt vector flags to | 
|  | * save off the Interrupt table length to the Temp8 variable. | 
|  | */ | 
|  | buffer += 3; | 
|  | temp8 = *buffer; | 
|  |  | 
|  | /* | 
|  | * To compensate for multiple interrupt numbers, add 4 bytes for | 
|  | * each additional interrupts greater than 1 | 
|  | */ | 
|  | additional_bytes = (u8) ((temp8 - 1) * 4); | 
|  |  | 
|  | /* | 
|  | * Resource Source Index and Resource Source are optional elements. | 
|  | * Check the length of the Bytestream.  If it is greater than 9, | 
|  | * that means that an Index exists and is followed by a null | 
|  | * terminated string.  Therefore, set the temp variable to the | 
|  | * length minus the minimum byte stream length plus the byte for | 
|  | * the Index to determine the size of the NULL terminated string. | 
|  | */ | 
|  | if (9 + additional_bytes < temp16) { | 
|  | temp8 = (u8) (temp16 - (9 + additional_bytes)); | 
|  | } | 
|  | else { | 
|  | temp8 = 0; | 
|  | } | 
|  |  | 
|  | /* Ensure a 32-bit boundary for the structure */ | 
|  |  | 
|  | temp8 = (u8) ACPI_ROUND_UP_to_32_bITS (temp8); | 
|  |  | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_ext_irq) + | 
|  | (additional_bytes * sizeof (u8)) + | 
|  | (temp8 * sizeof (u8)); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_IRQ_FORMAT: | 
|  | /* | 
|  | * IRQ Resource. | 
|  | * Determine if it there are two or three trailing bytes | 
|  | */ | 
|  | buffer = byte_stream_buffer; | 
|  | temp8 = *buffer; | 
|  |  | 
|  | if(temp8 & 0x01) { | 
|  | bytes_consumed = 4; | 
|  | } | 
|  | else { | 
|  | bytes_consumed = 3; | 
|  | } | 
|  |  | 
|  | /* Point past the descriptor */ | 
|  |  | 
|  | ++buffer; | 
|  |  | 
|  | /* Look at the number of bits set */ | 
|  |  | 
|  | ACPI_MOVE_16_TO_16 (&temp16, buffer); | 
|  |  | 
|  | for (index = 0; index < 16; index++) { | 
|  | if (temp16 & 0x1) { | 
|  | ++number_of_interrupts; | 
|  | } | 
|  |  | 
|  | temp16 >>= 1; | 
|  | } | 
|  |  | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_io) + | 
|  | (number_of_interrupts * sizeof (u32)); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_DMA_FORMAT: | 
|  | /* | 
|  | * DMA Resource | 
|  | */ | 
|  | buffer = byte_stream_buffer; | 
|  | bytes_consumed = 3; | 
|  |  | 
|  | /* Point past the descriptor */ | 
|  |  | 
|  | ++buffer; | 
|  |  | 
|  | /* Look at the number of bits set */ | 
|  |  | 
|  | temp8 = *buffer; | 
|  |  | 
|  | for(index = 0; index < 8; index++) { | 
|  | if(temp8 & 0x1) { | 
|  | ++number_of_channels; | 
|  | } | 
|  |  | 
|  | temp8 >>= 1; | 
|  | } | 
|  |  | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_dma) + | 
|  | (number_of_channels * sizeof (u32)); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_START_DEPENDENT: | 
|  | /* | 
|  | * Start Dependent Functions Resource | 
|  | * Determine if it there are two or three trailing bytes | 
|  | */ | 
|  | buffer = byte_stream_buffer; | 
|  | temp8 = *buffer; | 
|  |  | 
|  | if(temp8 & 0x01) { | 
|  | bytes_consumed = 2; | 
|  | } | 
|  | else { | 
|  | bytes_consumed = 1; | 
|  | } | 
|  |  | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_start_dpf); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_END_DEPENDENT: | 
|  | /* | 
|  | * End Dependent Functions Resource | 
|  | */ | 
|  | bytes_consumed = 1; | 
|  | structure_size = ACPI_RESOURCE_LENGTH; | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_IO_PORT: | 
|  | /* | 
|  | * IO Port Resource | 
|  | */ | 
|  | bytes_consumed = 8; | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_io); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_FIXED_IO_PORT: | 
|  | /* | 
|  | * Fixed IO Port Resource | 
|  | */ | 
|  | bytes_consumed = 4; | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_fixed_io); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_SMALL_VENDOR: | 
|  | /* | 
|  | * Vendor Specific Resource | 
|  | */ | 
|  | buffer = byte_stream_buffer; | 
|  |  | 
|  | temp8 = *buffer; | 
|  | temp8 = (u8) (temp8 & 0x7); | 
|  | bytes_consumed = temp8 + 1; | 
|  |  | 
|  | /* Ensure a 32-bit boundary for the structure */ | 
|  |  | 
|  | temp8 = (u8) ACPI_ROUND_UP_to_32_bITS (temp8); | 
|  | structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_vendor) + | 
|  | (temp8 * sizeof (u8)); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case ACPI_RDESC_TYPE_END_TAG: | 
|  | /* | 
|  | * End Tag | 
|  | */ | 
|  | bytes_consumed = 2; | 
|  | structure_size = ACPI_RESOURCE_LENGTH; | 
|  | byte_stream_buffer_length = bytes_parsed; | 
|  | break; | 
|  |  | 
|  |  | 
|  | default: | 
|  | /* | 
|  | * If we get here, everything is out of sync, | 
|  | * exit with an error | 
|  | */ | 
|  | return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE); | 
|  | } | 
|  |  | 
|  | /* Update the return value and counter */ | 
|  |  | 
|  | buffer_size += (u32) ACPI_ALIGN_RESOURCE_SIZE (structure_size); | 
|  | bytes_parsed += bytes_consumed; | 
|  |  | 
|  | /* Set the byte stream to point to the next resource */ | 
|  |  | 
|  | byte_stream_buffer += bytes_consumed; | 
|  | } | 
|  |  | 
|  | /* This is the data the caller needs */ | 
|  |  | 
|  | *size_needed = buffer_size; | 
|  | return_ACPI_STATUS (AE_OK); | 
|  | } | 
|  |  | 
|  |  | 
|  | /******************************************************************************* | 
|  | * | 
|  | * FUNCTION:    acpi_rs_get_pci_routing_table_length | 
|  | * | 
|  | * PARAMETERS:  package_object          - Pointer to the package object | 
|  | *              buffer_size_needed      - u32 pointer of the size buffer | 
|  | *                                        needed to properly return the | 
|  | *                                        parsed data | 
|  | * | 
|  | * RETURN:      Status | 
|  | * | 
|  | * DESCRIPTION: Given a package representing a PCI routing table, this | 
|  | *              calculates the size of the corresponding linked list of | 
|  | *              descriptions. | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | acpi_status | 
|  | acpi_rs_get_pci_routing_table_length ( | 
|  | union acpi_operand_object       *package_object, | 
|  | acpi_size                       *buffer_size_needed) | 
|  | { | 
|  | u32                             number_of_elements; | 
|  | acpi_size                       temp_size_needed = 0; | 
|  | union acpi_operand_object       **top_object_list; | 
|  | u32                             index; | 
|  | union acpi_operand_object       *package_element; | 
|  | union acpi_operand_object       **sub_object_list; | 
|  | u8                              name_found; | 
|  | u32                             table_index; | 
|  |  | 
|  |  | 
|  | ACPI_FUNCTION_TRACE ("rs_get_pci_routing_table_length"); | 
|  |  | 
|  |  | 
|  | number_of_elements = package_object->package.count; | 
|  |  | 
|  | /* | 
|  | * Calculate the size of the return buffer. | 
|  | * The base size is the number of elements * the sizes of the | 
|  | * structures.  Additional space for the strings is added below. | 
|  | * The minus one is to subtract the size of the u8 Source[1] | 
|  | * member because it is added below. | 
|  | * | 
|  | * But each PRT_ENTRY structure has a pointer to a string and | 
|  | * the size of that string must be found. | 
|  | */ | 
|  | top_object_list = package_object->package.elements; | 
|  |  | 
|  | for (index = 0; index < number_of_elements; index++) { | 
|  | /* Dereference the sub-package */ | 
|  |  | 
|  | package_element = *top_object_list; | 
|  |  | 
|  | /* | 
|  | * The sub_object_list will now point to an array of the | 
|  | * four IRQ elements: Address, Pin, Source and source_index | 
|  | */ | 
|  | sub_object_list = package_element->package.elements; | 
|  |  | 
|  | /* Scan the irq_table_elements for the Source Name String */ | 
|  |  | 
|  | name_found = FALSE; | 
|  |  | 
|  | for (table_index = 0; table_index < 4 && !name_found; table_index++) { | 
|  | if ((ACPI_TYPE_STRING == | 
|  | ACPI_GET_OBJECT_TYPE (*sub_object_list)) || | 
|  |  | 
|  | ((ACPI_TYPE_LOCAL_REFERENCE == | 
|  | ACPI_GET_OBJECT_TYPE (*sub_object_list)) && | 
|  |  | 
|  | ((*sub_object_list)->reference.opcode == | 
|  | AML_INT_NAMEPATH_OP))) { | 
|  | name_found = TRUE; | 
|  | } | 
|  | else { | 
|  | /* Look at the next element */ | 
|  |  | 
|  | sub_object_list++; | 
|  | } | 
|  | } | 
|  |  | 
|  | temp_size_needed += (sizeof (struct acpi_pci_routing_table) - 4); | 
|  |  | 
|  | /* Was a String type found? */ | 
|  |  | 
|  | if (name_found) { | 
|  | if (ACPI_GET_OBJECT_TYPE (*sub_object_list) == ACPI_TYPE_STRING) { | 
|  | /* | 
|  | * The length String.Length field does not include the | 
|  | * terminating NULL, add 1 | 
|  | */ | 
|  | temp_size_needed += ((acpi_size) | 
|  | (*sub_object_list)->string.length + 1); | 
|  | } | 
|  | else { | 
|  | temp_size_needed += acpi_ns_get_pathname_length ( | 
|  | (*sub_object_list)->reference.node); | 
|  | } | 
|  | } | 
|  | else { | 
|  | /* | 
|  | * If no name was found, then this is a NULL, which is | 
|  | * translated as a u32 zero. | 
|  | */ | 
|  | temp_size_needed += sizeof (u32); | 
|  | } | 
|  |  | 
|  | /* Round up the size since each element must be aligned */ | 
|  |  | 
|  | temp_size_needed = ACPI_ROUND_UP_to_64_bITS (temp_size_needed); | 
|  |  | 
|  | /* Point to the next union acpi_operand_object */ | 
|  |  | 
|  | top_object_list++; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Adding an extra element to the end of the list, essentially a | 
|  | * NULL terminator | 
|  | */ | 
|  | *buffer_size_needed = temp_size_needed + sizeof (struct acpi_pci_routing_table); | 
|  | return_ACPI_STATUS (AE_OK); | 
|  | } |