usb: gadget: r8a66597-udc: add support for SUDMAC
SH7757 has a USB function with internal DMA controller (SUDMAC).
This patch supports the SUDMAC. The SUDMAC is incompatible with
general-purpose DMAC. So, it doesn't use dmaengine.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 832ee59..8e3de61 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -43,6 +43,7 @@
((pipenum >= R8A66597_BASE_PIPENUM_ISOC) && \
(pipenum < (R8A66597_BASE_PIPENUM_ISOC + R8A66597_MAX_NUM_ISOC)))
+#define r8a66597_is_sudmac(r8a66597) (r8a66597->pdata->sudmac)
struct r8a66597_pipe_info {
u16 pipe;
u16 epnum;
@@ -60,6 +61,7 @@
struct r8a66597_ep {
struct usb_ep ep;
struct r8a66597 *r8a66597;
+ struct r8a66597_dma *dma;
struct list_head queue;
unsigned busy:1;
@@ -75,13 +77,20 @@
unsigned char fifoaddr;
unsigned char fifosel;
unsigned char fifoctr;
- unsigned char fifotrn;
unsigned char pipectr;
+ unsigned char pipetre;
+ unsigned char pipetrn;
+};
+
+struct r8a66597_dma {
+ unsigned used:1;
+ unsigned dir:1; /* 1 = IN(write), 0 = OUT(read) */
};
struct r8a66597 {
spinlock_t lock;
void __iomem *reg;
+ void __iomem *sudmac_reg;
#ifdef CONFIG_HAVE_CLK
struct clk *clk;
@@ -94,6 +103,7 @@
struct r8a66597_ep ep[R8A66597_MAX_NUM_PIPE];
struct r8a66597_ep *pipenum2ep[R8A66597_MAX_NUM_PIPE];
struct r8a66597_ep *epaddr2ep[16];
+ struct r8a66597_dma dma;
struct timer_list timer;
struct usb_request *ep0_req; /* for internal request */
@@ -251,7 +261,21 @@
return clock;
}
+static inline u32 r8a66597_sudmac_read(struct r8a66597 *r8a66597,
+ unsigned long offset)
+{
+ return ioread32(r8a66597->sudmac_reg + offset);
+}
+
+static inline void r8a66597_sudmac_write(struct r8a66597 *r8a66597, u32 val,
+ unsigned long offset)
+{
+ iowrite32(val, r8a66597->sudmac_reg + offset);
+}
+
#define get_pipectr_addr(pipenum) (PIPE1CTR + (pipenum - 1) * 2)
+#define get_pipetre_addr(pipenum) (PIPE1TRE + (pipenum - 1) * 4)
+#define get_pipetrn_addr(pipenum) (PIPE1TRN + (pipenum - 1) * 4)
#define enable_irq_ready(r8a66597, pipenum) \
enable_pipe_irq(r8a66597, pipenum, BRDYENB)