| /* | 
 |  *  linux/fs/ext4/inode.c | 
 |  * | 
 |  * Copyright (C) 1992, 1993, 1994, 1995 | 
 |  * Remy Card (card@masi.ibp.fr) | 
 |  * Laboratoire MASI - Institut Blaise Pascal | 
 |  * Universite Pierre et Marie Curie (Paris VI) | 
 |  * | 
 |  *  from | 
 |  * | 
 |  *  linux/fs/minix/inode.c | 
 |  * | 
 |  *  Copyright (C) 1991, 1992  Linus Torvalds | 
 |  * | 
 |  *  Goal-directed block allocation by Stephen Tweedie | 
 |  *	(sct@redhat.com), 1993, 1998 | 
 |  *  Big-endian to little-endian byte-swapping/bitmaps by | 
 |  *        David S. Miller (davem@caip.rutgers.edu), 1995 | 
 |  *  64-bit file support on 64-bit platforms by Jakub Jelinek | 
 |  *	(jj@sunsite.ms.mff.cuni.cz) | 
 |  * | 
 |  *  Assorted race fixes, rewrite of ext4_get_block() by Al Viro, 2000 | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/time.h> | 
 | #include <linux/jbd2.h> | 
 | #include <linux/highuid.h> | 
 | #include <linux/pagemap.h> | 
 | #include <linux/quotaops.h> | 
 | #include <linux/string.h> | 
 | #include <linux/buffer_head.h> | 
 | #include <linux/writeback.h> | 
 | #include <linux/pagevec.h> | 
 | #include <linux/mpage.h> | 
 | #include <linux/namei.h> | 
 | #include <linux/uio.h> | 
 | #include <linux/bio.h> | 
 |  | 
 | #include "ext4_jbd2.h" | 
 | #include "xattr.h" | 
 | #include "acl.h" | 
 | #include "ext4_extents.h" | 
 |  | 
 | #include <trace/events/ext4.h> | 
 |  | 
 | #define MPAGE_DA_EXTENT_TAIL 0x01 | 
 |  | 
 | static inline int ext4_begin_ordered_truncate(struct inode *inode, | 
 | 					      loff_t new_size) | 
 | { | 
 | 	return jbd2_journal_begin_ordered_truncate( | 
 | 					EXT4_SB(inode->i_sb)->s_journal, | 
 | 					&EXT4_I(inode)->jinode, | 
 | 					new_size); | 
 | } | 
 |  | 
 | static void ext4_invalidatepage(struct page *page, unsigned long offset); | 
 |  | 
 | /* | 
 |  * Test whether an inode is a fast symlink. | 
 |  */ | 
 | static int ext4_inode_is_fast_symlink(struct inode *inode) | 
 | { | 
 | 	int ea_blocks = EXT4_I(inode)->i_file_acl ? | 
 | 		(inode->i_sb->s_blocksize >> 9) : 0; | 
 |  | 
 | 	return (S_ISLNK(inode->i_mode) && inode->i_blocks - ea_blocks == 0); | 
 | } | 
 |  | 
 | /* | 
 |  * The ext4 forget function must perform a revoke if we are freeing data | 
 |  * which has been journaled.  Metadata (eg. indirect blocks) must be | 
 |  * revoked in all cases. | 
 |  * | 
 |  * "bh" may be NULL: a metadata block may have been freed from memory | 
 |  * but there may still be a record of it in the journal, and that record | 
 |  * still needs to be revoked. | 
 |  * | 
 |  * If the handle isn't valid we're not journaling, but we still need to | 
 |  * call into ext4_journal_revoke() to put the buffer head. | 
 |  */ | 
 | int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode, | 
 | 		struct buffer_head *bh, ext4_fsblk_t blocknr) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	might_sleep(); | 
 |  | 
 | 	BUFFER_TRACE(bh, "enter"); | 
 |  | 
 | 	jbd_debug(4, "forgetting bh %p: is_metadata = %d, mode %o, " | 
 | 		  "data mode %x\n", | 
 | 		  bh, is_metadata, inode->i_mode, | 
 | 		  test_opt(inode->i_sb, DATA_FLAGS)); | 
 |  | 
 | 	/* Never use the revoke function if we are doing full data | 
 | 	 * journaling: there is no need to, and a V1 superblock won't | 
 | 	 * support it.  Otherwise, only skip the revoke on un-journaled | 
 | 	 * data blocks. */ | 
 |  | 
 | 	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA || | 
 | 	    (!is_metadata && !ext4_should_journal_data(inode))) { | 
 | 		if (bh) { | 
 | 			BUFFER_TRACE(bh, "call jbd2_journal_forget"); | 
 | 			return ext4_journal_forget(handle, bh); | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * data!=journal && (is_metadata || should_journal_data(inode)) | 
 | 	 */ | 
 | 	BUFFER_TRACE(bh, "call ext4_journal_revoke"); | 
 | 	err = ext4_journal_revoke(handle, blocknr, bh); | 
 | 	if (err) | 
 | 		ext4_abort(inode->i_sb, __func__, | 
 | 			   "error %d when attempting revoke", err); | 
 | 	BUFFER_TRACE(bh, "exit"); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * Work out how many blocks we need to proceed with the next chunk of a | 
 |  * truncate transaction. | 
 |  */ | 
 | static unsigned long blocks_for_truncate(struct inode *inode) | 
 | { | 
 | 	ext4_lblk_t needed; | 
 |  | 
 | 	needed = inode->i_blocks >> (inode->i_sb->s_blocksize_bits - 9); | 
 |  | 
 | 	/* Give ourselves just enough room to cope with inodes in which | 
 | 	 * i_blocks is corrupt: we've seen disk corruptions in the past | 
 | 	 * which resulted in random data in an inode which looked enough | 
 | 	 * like a regular file for ext4 to try to delete it.  Things | 
 | 	 * will go a bit crazy if that happens, but at least we should | 
 | 	 * try not to panic the whole kernel. */ | 
 | 	if (needed < 2) | 
 | 		needed = 2; | 
 |  | 
 | 	/* But we need to bound the transaction so we don't overflow the | 
 | 	 * journal. */ | 
 | 	if (needed > EXT4_MAX_TRANS_DATA) | 
 | 		needed = EXT4_MAX_TRANS_DATA; | 
 |  | 
 | 	return EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + needed; | 
 | } | 
 |  | 
 | /* | 
 |  * Truncate transactions can be complex and absolutely huge.  So we need to | 
 |  * be able to restart the transaction at a conventient checkpoint to make | 
 |  * sure we don't overflow the journal. | 
 |  * | 
 |  * start_transaction gets us a new handle for a truncate transaction, | 
 |  * and extend_transaction tries to extend the existing one a bit.  If | 
 |  * extend fails, we need to propagate the failure up and restart the | 
 |  * transaction in the top-level truncate loop. --sct | 
 |  */ | 
 | static handle_t *start_transaction(struct inode *inode) | 
 | { | 
 | 	handle_t *result; | 
 |  | 
 | 	result = ext4_journal_start(inode, blocks_for_truncate(inode)); | 
 | 	if (!IS_ERR(result)) | 
 | 		return result; | 
 |  | 
 | 	ext4_std_error(inode->i_sb, PTR_ERR(result)); | 
 | 	return result; | 
 | } | 
 |  | 
 | /* | 
 |  * Try to extend this transaction for the purposes of truncation. | 
 |  * | 
 |  * Returns 0 if we managed to create more room.  If we can't create more | 
 |  * room, and the transaction must be restarted we return 1. | 
 |  */ | 
 | static int try_to_extend_transaction(handle_t *handle, struct inode *inode) | 
 | { | 
 | 	if (!ext4_handle_valid(handle)) | 
 | 		return 0; | 
 | 	if (ext4_handle_has_enough_credits(handle, EXT4_RESERVE_TRANS_BLOCKS+1)) | 
 | 		return 0; | 
 | 	if (!ext4_journal_extend(handle, blocks_for_truncate(inode))) | 
 | 		return 0; | 
 | 	return 1; | 
 | } | 
 |  | 
 | /* | 
 |  * Restart the transaction associated with *handle.  This does a commit, | 
 |  * so before we call here everything must be consistently dirtied against | 
 |  * this transaction. | 
 |  */ | 
 | static int ext4_journal_test_restart(handle_t *handle, struct inode *inode) | 
 | { | 
 | 	BUG_ON(EXT4_JOURNAL(inode) == NULL); | 
 | 	jbd_debug(2, "restarting handle %p\n", handle); | 
 | 	return ext4_journal_restart(handle, blocks_for_truncate(inode)); | 
 | } | 
 |  | 
 | /* | 
 |  * Called at the last iput() if i_nlink is zero. | 
 |  */ | 
 | void ext4_delete_inode(struct inode *inode) | 
 | { | 
 | 	handle_t *handle; | 
 | 	int err; | 
 |  | 
 | 	if (ext4_should_order_data(inode)) | 
 | 		ext4_begin_ordered_truncate(inode, 0); | 
 | 	truncate_inode_pages(&inode->i_data, 0); | 
 |  | 
 | 	if (is_bad_inode(inode)) | 
 | 		goto no_delete; | 
 |  | 
 | 	handle = ext4_journal_start(inode, blocks_for_truncate(inode)+3); | 
 | 	if (IS_ERR(handle)) { | 
 | 		ext4_std_error(inode->i_sb, PTR_ERR(handle)); | 
 | 		/* | 
 | 		 * If we're going to skip the normal cleanup, we still need to | 
 | 		 * make sure that the in-core orphan linked list is properly | 
 | 		 * cleaned up. | 
 | 		 */ | 
 | 		ext4_orphan_del(NULL, inode); | 
 | 		goto no_delete; | 
 | 	} | 
 |  | 
 | 	if (IS_SYNC(inode)) | 
 | 		ext4_handle_sync(handle); | 
 | 	inode->i_size = 0; | 
 | 	err = ext4_mark_inode_dirty(handle, inode); | 
 | 	if (err) { | 
 | 		ext4_warning(inode->i_sb, __func__, | 
 | 			     "couldn't mark inode dirty (err %d)", err); | 
 | 		goto stop_handle; | 
 | 	} | 
 | 	if (inode->i_blocks) | 
 | 		ext4_truncate(inode); | 
 |  | 
 | 	/* | 
 | 	 * ext4_ext_truncate() doesn't reserve any slop when it | 
 | 	 * restarts journal transactions; therefore there may not be | 
 | 	 * enough credits left in the handle to remove the inode from | 
 | 	 * the orphan list and set the dtime field. | 
 | 	 */ | 
 | 	if (!ext4_handle_has_enough_credits(handle, 3)) { | 
 | 		err = ext4_journal_extend(handle, 3); | 
 | 		if (err > 0) | 
 | 			err = ext4_journal_restart(handle, 3); | 
 | 		if (err != 0) { | 
 | 			ext4_warning(inode->i_sb, __func__, | 
 | 				     "couldn't extend journal (err %d)", err); | 
 | 		stop_handle: | 
 | 			ext4_journal_stop(handle); | 
 | 			goto no_delete; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Kill off the orphan record which ext4_truncate created. | 
 | 	 * AKPM: I think this can be inside the above `if'. | 
 | 	 * Note that ext4_orphan_del() has to be able to cope with the | 
 | 	 * deletion of a non-existent orphan - this is because we don't | 
 | 	 * know if ext4_truncate() actually created an orphan record. | 
 | 	 * (Well, we could do this if we need to, but heck - it works) | 
 | 	 */ | 
 | 	ext4_orphan_del(handle, inode); | 
 | 	EXT4_I(inode)->i_dtime	= get_seconds(); | 
 |  | 
 | 	/* | 
 | 	 * One subtle ordering requirement: if anything has gone wrong | 
 | 	 * (transaction abort, IO errors, whatever), then we can still | 
 | 	 * do these next steps (the fs will already have been marked as | 
 | 	 * having errors), but we can't free the inode if the mark_dirty | 
 | 	 * fails. | 
 | 	 */ | 
 | 	if (ext4_mark_inode_dirty(handle, inode)) | 
 | 		/* If that failed, just do the required in-core inode clear. */ | 
 | 		clear_inode(inode); | 
 | 	else | 
 | 		ext4_free_inode(handle, inode); | 
 | 	ext4_journal_stop(handle); | 
 | 	return; | 
 | no_delete: | 
 | 	clear_inode(inode);	/* We must guarantee clearing of inode... */ | 
 | } | 
 |  | 
 | typedef struct { | 
 | 	__le32	*p; | 
 | 	__le32	key; | 
 | 	struct buffer_head *bh; | 
 | } Indirect; | 
 |  | 
 | static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v) | 
 | { | 
 | 	p->key = *(p->p = v); | 
 | 	p->bh = bh; | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_block_to_path - parse the block number into array of offsets | 
 |  *	@inode: inode in question (we are only interested in its superblock) | 
 |  *	@i_block: block number to be parsed | 
 |  *	@offsets: array to store the offsets in | 
 |  *	@boundary: set this non-zero if the referred-to block is likely to be | 
 |  *	       followed (on disk) by an indirect block. | 
 |  * | 
 |  *	To store the locations of file's data ext4 uses a data structure common | 
 |  *	for UNIX filesystems - tree of pointers anchored in the inode, with | 
 |  *	data blocks at leaves and indirect blocks in intermediate nodes. | 
 |  *	This function translates the block number into path in that tree - | 
 |  *	return value is the path length and @offsets[n] is the offset of | 
 |  *	pointer to (n+1)th node in the nth one. If @block is out of range | 
 |  *	(negative or too large) warning is printed and zero returned. | 
 |  * | 
 |  *	Note: function doesn't find node addresses, so no IO is needed. All | 
 |  *	we need to know is the capacity of indirect blocks (taken from the | 
 |  *	inode->i_sb). | 
 |  */ | 
 |  | 
 | /* | 
 |  * Portability note: the last comparison (check that we fit into triple | 
 |  * indirect block) is spelled differently, because otherwise on an | 
 |  * architecture with 32-bit longs and 8Kb pages we might get into trouble | 
 |  * if our filesystem had 8Kb blocks. We might use long long, but that would | 
 |  * kill us on x86. Oh, well, at least the sign propagation does not matter - | 
 |  * i_block would have to be negative in the very beginning, so we would not | 
 |  * get there at all. | 
 |  */ | 
 |  | 
 | static int ext4_block_to_path(struct inode *inode, | 
 | 			      ext4_lblk_t i_block, | 
 | 			      ext4_lblk_t offsets[4], int *boundary) | 
 | { | 
 | 	int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
 | 	int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb); | 
 | 	const long direct_blocks = EXT4_NDIR_BLOCKS, | 
 | 		indirect_blocks = ptrs, | 
 | 		double_blocks = (1 << (ptrs_bits * 2)); | 
 | 	int n = 0; | 
 | 	int final = 0; | 
 |  | 
 | 	if (i_block < 0) { | 
 | 		ext4_warning(inode->i_sb, "ext4_block_to_path", "block < 0"); | 
 | 	} else if (i_block < direct_blocks) { | 
 | 		offsets[n++] = i_block; | 
 | 		final = direct_blocks; | 
 | 	} else if ((i_block -= direct_blocks) < indirect_blocks) { | 
 | 		offsets[n++] = EXT4_IND_BLOCK; | 
 | 		offsets[n++] = i_block; | 
 | 		final = ptrs; | 
 | 	} else if ((i_block -= indirect_blocks) < double_blocks) { | 
 | 		offsets[n++] = EXT4_DIND_BLOCK; | 
 | 		offsets[n++] = i_block >> ptrs_bits; | 
 | 		offsets[n++] = i_block & (ptrs - 1); | 
 | 		final = ptrs; | 
 | 	} else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) { | 
 | 		offsets[n++] = EXT4_TIND_BLOCK; | 
 | 		offsets[n++] = i_block >> (ptrs_bits * 2); | 
 | 		offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1); | 
 | 		offsets[n++] = i_block & (ptrs - 1); | 
 | 		final = ptrs; | 
 | 	} else { | 
 | 		ext4_warning(inode->i_sb, "ext4_block_to_path", | 
 | 			     "block %lu > max in inode %lu", | 
 | 			     i_block + direct_blocks + | 
 | 			     indirect_blocks + double_blocks, inode->i_ino); | 
 | 	} | 
 | 	if (boundary) | 
 | 		*boundary = final - 1 - (i_block & (ptrs - 1)); | 
 | 	return n; | 
 | } | 
 |  | 
 | static int __ext4_check_blockref(const char *function, struct inode *inode, | 
 | 				 __le32 *p, unsigned int max) | 
 | { | 
 | 	__le32 *bref = p; | 
 | 	unsigned int blk; | 
 |  | 
 | 	while (bref < p+max) { | 
 | 		blk = le32_to_cpu(*bref++); | 
 | 		if (blk && | 
 | 		    unlikely(!ext4_data_block_valid(EXT4_SB(inode->i_sb), | 
 | 						    blk, 1))) { | 
 | 			ext4_error(inode->i_sb, function, | 
 | 				   "invalid block reference %u " | 
 | 				   "in inode #%lu", blk, inode->i_ino); | 
 | 			return -EIO; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | #define ext4_check_indirect_blockref(inode, bh)                         \ | 
 | 	__ext4_check_blockref(__func__, inode, (__le32 *)(bh)->b_data,  \ | 
 | 			      EXT4_ADDR_PER_BLOCK((inode)->i_sb)) | 
 |  | 
 | #define ext4_check_inode_blockref(inode)                                \ | 
 | 	__ext4_check_blockref(__func__, inode, EXT4_I(inode)->i_data,   \ | 
 | 			      EXT4_NDIR_BLOCKS) | 
 |  | 
 | /** | 
 |  *	ext4_get_branch - read the chain of indirect blocks leading to data | 
 |  *	@inode: inode in question | 
 |  *	@depth: depth of the chain (1 - direct pointer, etc.) | 
 |  *	@offsets: offsets of pointers in inode/indirect blocks | 
 |  *	@chain: place to store the result | 
 |  *	@err: here we store the error value | 
 |  * | 
 |  *	Function fills the array of triples <key, p, bh> and returns %NULL | 
 |  *	if everything went OK or the pointer to the last filled triple | 
 |  *	(incomplete one) otherwise. Upon the return chain[i].key contains | 
 |  *	the number of (i+1)-th block in the chain (as it is stored in memory, | 
 |  *	i.e. little-endian 32-bit), chain[i].p contains the address of that | 
 |  *	number (it points into struct inode for i==0 and into the bh->b_data | 
 |  *	for i>0) and chain[i].bh points to the buffer_head of i-th indirect | 
 |  *	block for i>0 and NULL for i==0. In other words, it holds the block | 
 |  *	numbers of the chain, addresses they were taken from (and where we can | 
 |  *	verify that chain did not change) and buffer_heads hosting these | 
 |  *	numbers. | 
 |  * | 
 |  *	Function stops when it stumbles upon zero pointer (absent block) | 
 |  *		(pointer to last triple returned, *@err == 0) | 
 |  *	or when it gets an IO error reading an indirect block | 
 |  *		(ditto, *@err == -EIO) | 
 |  *	or when it reads all @depth-1 indirect blocks successfully and finds | 
 |  *	the whole chain, all way to the data (returns %NULL, *err == 0). | 
 |  * | 
 |  *      Need to be called with | 
 |  *      down_read(&EXT4_I(inode)->i_data_sem) | 
 |  */ | 
 | static Indirect *ext4_get_branch(struct inode *inode, int depth, | 
 | 				 ext4_lblk_t  *offsets, | 
 | 				 Indirect chain[4], int *err) | 
 | { | 
 | 	struct super_block *sb = inode->i_sb; | 
 | 	Indirect *p = chain; | 
 | 	struct buffer_head *bh; | 
 |  | 
 | 	*err = 0; | 
 | 	/* i_data is not going away, no lock needed */ | 
 | 	add_chain(chain, NULL, EXT4_I(inode)->i_data + *offsets); | 
 | 	if (!p->key) | 
 | 		goto no_block; | 
 | 	while (--depth) { | 
 | 		bh = sb_getblk(sb, le32_to_cpu(p->key)); | 
 | 		if (unlikely(!bh)) | 
 | 			goto failure; | 
 |  | 
 | 		if (!bh_uptodate_or_lock(bh)) { | 
 | 			if (bh_submit_read(bh) < 0) { | 
 | 				put_bh(bh); | 
 | 				goto failure; | 
 | 			} | 
 | 			/* validate block references */ | 
 | 			if (ext4_check_indirect_blockref(inode, bh)) { | 
 | 				put_bh(bh); | 
 | 				goto failure; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		add_chain(++p, bh, (__le32 *)bh->b_data + *++offsets); | 
 | 		/* Reader: end */ | 
 | 		if (!p->key) | 
 | 			goto no_block; | 
 | 	} | 
 | 	return NULL; | 
 |  | 
 | failure: | 
 | 	*err = -EIO; | 
 | no_block: | 
 | 	return p; | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_find_near - find a place for allocation with sufficient locality | 
 |  *	@inode: owner | 
 |  *	@ind: descriptor of indirect block. | 
 |  * | 
 |  *	This function returns the preferred place for block allocation. | 
 |  *	It is used when heuristic for sequential allocation fails. | 
 |  *	Rules are: | 
 |  *	  + if there is a block to the left of our position - allocate near it. | 
 |  *	  + if pointer will live in indirect block - allocate near that block. | 
 |  *	  + if pointer will live in inode - allocate in the same | 
 |  *	    cylinder group. | 
 |  * | 
 |  * In the latter case we colour the starting block by the callers PID to | 
 |  * prevent it from clashing with concurrent allocations for a different inode | 
 |  * in the same block group.   The PID is used here so that functionally related | 
 |  * files will be close-by on-disk. | 
 |  * | 
 |  *	Caller must make sure that @ind is valid and will stay that way. | 
 |  */ | 
 | static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind) | 
 | { | 
 | 	struct ext4_inode_info *ei = EXT4_I(inode); | 
 | 	__le32 *start = ind->bh ? (__le32 *) ind->bh->b_data : ei->i_data; | 
 | 	__le32 *p; | 
 | 	ext4_fsblk_t bg_start; | 
 | 	ext4_fsblk_t last_block; | 
 | 	ext4_grpblk_t colour; | 
 | 	ext4_group_t block_group; | 
 | 	int flex_size = ext4_flex_bg_size(EXT4_SB(inode->i_sb)); | 
 |  | 
 | 	/* Try to find previous block */ | 
 | 	for (p = ind->p - 1; p >= start; p--) { | 
 | 		if (*p) | 
 | 			return le32_to_cpu(*p); | 
 | 	} | 
 |  | 
 | 	/* No such thing, so let's try location of indirect block */ | 
 | 	if (ind->bh) | 
 | 		return ind->bh->b_blocknr; | 
 |  | 
 | 	/* | 
 | 	 * It is going to be referred to from the inode itself? OK, just put it | 
 | 	 * into the same cylinder group then. | 
 | 	 */ | 
 | 	block_group = ei->i_block_group; | 
 | 	if (flex_size >= EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME) { | 
 | 		block_group &= ~(flex_size-1); | 
 | 		if (S_ISREG(inode->i_mode)) | 
 | 			block_group++; | 
 | 	} | 
 | 	bg_start = ext4_group_first_block_no(inode->i_sb, block_group); | 
 | 	last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1; | 
 |  | 
 | 	/* | 
 | 	 * If we are doing delayed allocation, we don't need take | 
 | 	 * colour into account. | 
 | 	 */ | 
 | 	if (test_opt(inode->i_sb, DELALLOC)) | 
 | 		return bg_start; | 
 |  | 
 | 	if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block) | 
 | 		colour = (current->pid % 16) * | 
 | 			(EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16); | 
 | 	else | 
 | 		colour = (current->pid % 16) * ((last_block - bg_start) / 16); | 
 | 	return bg_start + colour; | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_find_goal - find a preferred place for allocation. | 
 |  *	@inode: owner | 
 |  *	@block:  block we want | 
 |  *	@partial: pointer to the last triple within a chain | 
 |  * | 
 |  *	Normally this function find the preferred place for block allocation, | 
 |  *	returns it. | 
 |  */ | 
 | static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block, | 
 | 				   Indirect *partial) | 
 | { | 
 | 	/* | 
 | 	 * XXX need to get goal block from mballoc's data structures | 
 | 	 */ | 
 |  | 
 | 	return ext4_find_near(inode, partial); | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_blks_to_allocate: Look up the block map and count the number | 
 |  *	of direct blocks need to be allocated for the given branch. | 
 |  * | 
 |  *	@branch: chain of indirect blocks | 
 |  *	@k: number of blocks need for indirect blocks | 
 |  *	@blks: number of data blocks to be mapped. | 
 |  *	@blocks_to_boundary:  the offset in the indirect block | 
 |  * | 
 |  *	return the total number of blocks to be allocate, including the | 
 |  *	direct and indirect blocks. | 
 |  */ | 
 | static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks, | 
 | 				 int blocks_to_boundary) | 
 | { | 
 | 	unsigned int count = 0; | 
 |  | 
 | 	/* | 
 | 	 * Simple case, [t,d]Indirect block(s) has not allocated yet | 
 | 	 * then it's clear blocks on that path have not allocated | 
 | 	 */ | 
 | 	if (k > 0) { | 
 | 		/* right now we don't handle cross boundary allocation */ | 
 | 		if (blks < blocks_to_boundary + 1) | 
 | 			count += blks; | 
 | 		else | 
 | 			count += blocks_to_boundary + 1; | 
 | 		return count; | 
 | 	} | 
 |  | 
 | 	count++; | 
 | 	while (count < blks && count <= blocks_to_boundary && | 
 | 		le32_to_cpu(*(branch[0].p + count)) == 0) { | 
 | 		count++; | 
 | 	} | 
 | 	return count; | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_alloc_blocks: multiple allocate blocks needed for a branch | 
 |  *	@indirect_blks: the number of blocks need to allocate for indirect | 
 |  *			blocks | 
 |  * | 
 |  *	@new_blocks: on return it will store the new block numbers for | 
 |  *	the indirect blocks(if needed) and the first direct block, | 
 |  *	@blks:	on return it will store the total number of allocated | 
 |  *		direct blocks | 
 |  */ | 
 | static int ext4_alloc_blocks(handle_t *handle, struct inode *inode, | 
 | 			     ext4_lblk_t iblock, ext4_fsblk_t goal, | 
 | 			     int indirect_blks, int blks, | 
 | 			     ext4_fsblk_t new_blocks[4], int *err) | 
 | { | 
 | 	struct ext4_allocation_request ar; | 
 | 	int target, i; | 
 | 	unsigned long count = 0, blk_allocated = 0; | 
 | 	int index = 0; | 
 | 	ext4_fsblk_t current_block = 0; | 
 | 	int ret = 0; | 
 |  | 
 | 	/* | 
 | 	 * Here we try to allocate the requested multiple blocks at once, | 
 | 	 * on a best-effort basis. | 
 | 	 * To build a branch, we should allocate blocks for | 
 | 	 * the indirect blocks(if not allocated yet), and at least | 
 | 	 * the first direct block of this branch.  That's the | 
 | 	 * minimum number of blocks need to allocate(required) | 
 | 	 */ | 
 | 	/* first we try to allocate the indirect blocks */ | 
 | 	target = indirect_blks; | 
 | 	while (target > 0) { | 
 | 		count = target; | 
 | 		/* allocating blocks for indirect blocks and direct blocks */ | 
 | 		current_block = ext4_new_meta_blocks(handle, inode, | 
 | 							goal, &count, err); | 
 | 		if (*err) | 
 | 			goto failed_out; | 
 |  | 
 | 		target -= count; | 
 | 		/* allocate blocks for indirect blocks */ | 
 | 		while (index < indirect_blks && count) { | 
 | 			new_blocks[index++] = current_block++; | 
 | 			count--; | 
 | 		} | 
 | 		if (count > 0) { | 
 | 			/* | 
 | 			 * save the new block number | 
 | 			 * for the first direct block | 
 | 			 */ | 
 | 			new_blocks[index] = current_block; | 
 | 			printk(KERN_INFO "%s returned more blocks than " | 
 | 						"requested\n", __func__); | 
 | 			WARN_ON(1); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	target = blks - count ; | 
 | 	blk_allocated = count; | 
 | 	if (!target) | 
 | 		goto allocated; | 
 | 	/* Now allocate data blocks */ | 
 | 	memset(&ar, 0, sizeof(ar)); | 
 | 	ar.inode = inode; | 
 | 	ar.goal = goal; | 
 | 	ar.len = target; | 
 | 	ar.logical = iblock; | 
 | 	if (S_ISREG(inode->i_mode)) | 
 | 		/* enable in-core preallocation only for regular files */ | 
 | 		ar.flags = EXT4_MB_HINT_DATA; | 
 |  | 
 | 	current_block = ext4_mb_new_blocks(handle, &ar, err); | 
 |  | 
 | 	if (*err && (target == blks)) { | 
 | 		/* | 
 | 		 * if the allocation failed and we didn't allocate | 
 | 		 * any blocks before | 
 | 		 */ | 
 | 		goto failed_out; | 
 | 	} | 
 | 	if (!*err) { | 
 | 		if (target == blks) { | 
 | 			/* | 
 | 			 * save the new block number | 
 | 			 * for the first direct block | 
 | 			 */ | 
 | 			new_blocks[index] = current_block; | 
 | 		} | 
 | 		blk_allocated += ar.len; | 
 | 	} | 
 | allocated: | 
 | 	/* total number of blocks allocated for direct blocks */ | 
 | 	ret = blk_allocated; | 
 | 	*err = 0; | 
 | 	return ret; | 
 | failed_out: | 
 | 	for (i = 0; i < index; i++) | 
 | 		ext4_free_blocks(handle, inode, new_blocks[i], 1, 0); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_alloc_branch - allocate and set up a chain of blocks. | 
 |  *	@inode: owner | 
 |  *	@indirect_blks: number of allocated indirect blocks | 
 |  *	@blks: number of allocated direct blocks | 
 |  *	@offsets: offsets (in the blocks) to store the pointers to next. | 
 |  *	@branch: place to store the chain in. | 
 |  * | 
 |  *	This function allocates blocks, zeroes out all but the last one, | 
 |  *	links them into chain and (if we are synchronous) writes them to disk. | 
 |  *	In other words, it prepares a branch that can be spliced onto the | 
 |  *	inode. It stores the information about that chain in the branch[], in | 
 |  *	the same format as ext4_get_branch() would do. We are calling it after | 
 |  *	we had read the existing part of chain and partial points to the last | 
 |  *	triple of that (one with zero ->key). Upon the exit we have the same | 
 |  *	picture as after the successful ext4_get_block(), except that in one | 
 |  *	place chain is disconnected - *branch->p is still zero (we did not | 
 |  *	set the last link), but branch->key contains the number that should | 
 |  *	be placed into *branch->p to fill that gap. | 
 |  * | 
 |  *	If allocation fails we free all blocks we've allocated (and forget | 
 |  *	their buffer_heads) and return the error value the from failed | 
 |  *	ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain | 
 |  *	as described above and return 0. | 
 |  */ | 
 | static int ext4_alloc_branch(handle_t *handle, struct inode *inode, | 
 | 			     ext4_lblk_t iblock, int indirect_blks, | 
 | 			     int *blks, ext4_fsblk_t goal, | 
 | 			     ext4_lblk_t *offsets, Indirect *branch) | 
 | { | 
 | 	int blocksize = inode->i_sb->s_blocksize; | 
 | 	int i, n = 0; | 
 | 	int err = 0; | 
 | 	struct buffer_head *bh; | 
 | 	int num; | 
 | 	ext4_fsblk_t new_blocks[4]; | 
 | 	ext4_fsblk_t current_block; | 
 |  | 
 | 	num = ext4_alloc_blocks(handle, inode, iblock, goal, indirect_blks, | 
 | 				*blks, new_blocks, &err); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	branch[0].key = cpu_to_le32(new_blocks[0]); | 
 | 	/* | 
 | 	 * metadata blocks and data blocks are allocated. | 
 | 	 */ | 
 | 	for (n = 1; n <= indirect_blks;  n++) { | 
 | 		/* | 
 | 		 * Get buffer_head for parent block, zero it out | 
 | 		 * and set the pointer to new one, then send | 
 | 		 * parent to disk. | 
 | 		 */ | 
 | 		bh = sb_getblk(inode->i_sb, new_blocks[n-1]); | 
 | 		branch[n].bh = bh; | 
 | 		lock_buffer(bh); | 
 | 		BUFFER_TRACE(bh, "call get_create_access"); | 
 | 		err = ext4_journal_get_create_access(handle, bh); | 
 | 		if (err) { | 
 | 			unlock_buffer(bh); | 
 | 			brelse(bh); | 
 | 			goto failed; | 
 | 		} | 
 |  | 
 | 		memset(bh->b_data, 0, blocksize); | 
 | 		branch[n].p = (__le32 *) bh->b_data + offsets[n]; | 
 | 		branch[n].key = cpu_to_le32(new_blocks[n]); | 
 | 		*branch[n].p = branch[n].key; | 
 | 		if (n == indirect_blks) { | 
 | 			current_block = new_blocks[n]; | 
 | 			/* | 
 | 			 * End of chain, update the last new metablock of | 
 | 			 * the chain to point to the new allocated | 
 | 			 * data blocks numbers | 
 | 			 */ | 
 | 			for (i = 1; i < num; i++) | 
 | 				*(branch[n].p + i) = cpu_to_le32(++current_block); | 
 | 		} | 
 | 		BUFFER_TRACE(bh, "marking uptodate"); | 
 | 		set_buffer_uptodate(bh); | 
 | 		unlock_buffer(bh); | 
 |  | 
 | 		BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | 
 | 		err = ext4_handle_dirty_metadata(handle, inode, bh); | 
 | 		if (err) | 
 | 			goto failed; | 
 | 	} | 
 | 	*blks = num; | 
 | 	return err; | 
 | failed: | 
 | 	/* Allocation failed, free what we already allocated */ | 
 | 	for (i = 1; i <= n ; i++) { | 
 | 		BUFFER_TRACE(branch[i].bh, "call jbd2_journal_forget"); | 
 | 		ext4_journal_forget(handle, branch[i].bh); | 
 | 	} | 
 | 	for (i = 0; i < indirect_blks; i++) | 
 | 		ext4_free_blocks(handle, inode, new_blocks[i], 1, 0); | 
 |  | 
 | 	ext4_free_blocks(handle, inode, new_blocks[i], num, 0); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | /** | 
 |  * ext4_splice_branch - splice the allocated branch onto inode. | 
 |  * @inode: owner | 
 |  * @block: (logical) number of block we are adding | 
 |  * @chain: chain of indirect blocks (with a missing link - see | 
 |  *	ext4_alloc_branch) | 
 |  * @where: location of missing link | 
 |  * @num:   number of indirect blocks we are adding | 
 |  * @blks:  number of direct blocks we are adding | 
 |  * | 
 |  * This function fills the missing link and does all housekeeping needed in | 
 |  * inode (->i_blocks, etc.). In case of success we end up with the full | 
 |  * chain to new block and return 0. | 
 |  */ | 
 | static int ext4_splice_branch(handle_t *handle, struct inode *inode, | 
 | 			      ext4_lblk_t block, Indirect *where, int num, | 
 | 			      int blks) | 
 | { | 
 | 	int i; | 
 | 	int err = 0; | 
 | 	ext4_fsblk_t current_block; | 
 |  | 
 | 	/* | 
 | 	 * If we're splicing into a [td]indirect block (as opposed to the | 
 | 	 * inode) then we need to get write access to the [td]indirect block | 
 | 	 * before the splice. | 
 | 	 */ | 
 | 	if (where->bh) { | 
 | 		BUFFER_TRACE(where->bh, "get_write_access"); | 
 | 		err = ext4_journal_get_write_access(handle, where->bh); | 
 | 		if (err) | 
 | 			goto err_out; | 
 | 	} | 
 | 	/* That's it */ | 
 |  | 
 | 	*where->p = where->key; | 
 |  | 
 | 	/* | 
 | 	 * Update the host buffer_head or inode to point to more just allocated | 
 | 	 * direct blocks blocks | 
 | 	 */ | 
 | 	if (num == 0 && blks > 1) { | 
 | 		current_block = le32_to_cpu(where->key) + 1; | 
 | 		for (i = 1; i < blks; i++) | 
 | 			*(where->p + i) = cpu_to_le32(current_block++); | 
 | 	} | 
 |  | 
 | 	/* We are done with atomic stuff, now do the rest of housekeeping */ | 
 | 	/* had we spliced it onto indirect block? */ | 
 | 	if (where->bh) { | 
 | 		/* | 
 | 		 * If we spliced it onto an indirect block, we haven't | 
 | 		 * altered the inode.  Note however that if it is being spliced | 
 | 		 * onto an indirect block at the very end of the file (the | 
 | 		 * file is growing) then we *will* alter the inode to reflect | 
 | 		 * the new i_size.  But that is not done here - it is done in | 
 | 		 * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode. | 
 | 		 */ | 
 | 		jbd_debug(5, "splicing indirect only\n"); | 
 | 		BUFFER_TRACE(where->bh, "call ext4_handle_dirty_metadata"); | 
 | 		err = ext4_handle_dirty_metadata(handle, inode, where->bh); | 
 | 		if (err) | 
 | 			goto err_out; | 
 | 	} else { | 
 | 		/* | 
 | 		 * OK, we spliced it into the inode itself on a direct block. | 
 | 		 */ | 
 | 		ext4_mark_inode_dirty(handle, inode); | 
 | 		jbd_debug(5, "splicing direct\n"); | 
 | 	} | 
 | 	return err; | 
 |  | 
 | err_out: | 
 | 	for (i = 1; i <= num; i++) { | 
 | 		BUFFER_TRACE(where[i].bh, "call jbd2_journal_forget"); | 
 | 		ext4_journal_forget(handle, where[i].bh); | 
 | 		ext4_free_blocks(handle, inode, | 
 | 					le32_to_cpu(where[i-1].key), 1, 0); | 
 | 	} | 
 | 	ext4_free_blocks(handle, inode, le32_to_cpu(where[num].key), blks, 0); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * The ext4_ind_get_blocks() function handles non-extents inodes | 
 |  * (i.e., using the traditional indirect/double-indirect i_blocks | 
 |  * scheme) for ext4_get_blocks(). | 
 |  * | 
 |  * Allocation strategy is simple: if we have to allocate something, we will | 
 |  * have to go the whole way to leaf. So let's do it before attaching anything | 
 |  * to tree, set linkage between the newborn blocks, write them if sync is | 
 |  * required, recheck the path, free and repeat if check fails, otherwise | 
 |  * set the last missing link (that will protect us from any truncate-generated | 
 |  * removals - all blocks on the path are immune now) and possibly force the | 
 |  * write on the parent block. | 
 |  * That has a nice additional property: no special recovery from the failed | 
 |  * allocations is needed - we simply release blocks and do not touch anything | 
 |  * reachable from inode. | 
 |  * | 
 |  * `handle' can be NULL if create == 0. | 
 |  * | 
 |  * return > 0, # of blocks mapped or allocated. | 
 |  * return = 0, if plain lookup failed. | 
 |  * return < 0, error case. | 
 |  * | 
 |  * The ext4_ind_get_blocks() function should be called with | 
 |  * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem | 
 |  * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or | 
 |  * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system | 
 |  * blocks. | 
 |  */ | 
 | static int ext4_ind_get_blocks(handle_t *handle, struct inode *inode, | 
 | 			       ext4_lblk_t iblock, unsigned int maxblocks, | 
 | 			       struct buffer_head *bh_result, | 
 | 			       int flags) | 
 | { | 
 | 	int err = -EIO; | 
 | 	ext4_lblk_t offsets[4]; | 
 | 	Indirect chain[4]; | 
 | 	Indirect *partial; | 
 | 	ext4_fsblk_t goal; | 
 | 	int indirect_blks; | 
 | 	int blocks_to_boundary = 0; | 
 | 	int depth; | 
 | 	int count = 0; | 
 | 	ext4_fsblk_t first_block = 0; | 
 |  | 
 | 	J_ASSERT(!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)); | 
 | 	J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0); | 
 | 	depth = ext4_block_to_path(inode, iblock, offsets, | 
 | 				   &blocks_to_boundary); | 
 |  | 
 | 	if (depth == 0) | 
 | 		goto out; | 
 |  | 
 | 	partial = ext4_get_branch(inode, depth, offsets, chain, &err); | 
 |  | 
 | 	/* Simplest case - block found, no allocation needed */ | 
 | 	if (!partial) { | 
 | 		first_block = le32_to_cpu(chain[depth - 1].key); | 
 | 		clear_buffer_new(bh_result); | 
 | 		count++; | 
 | 		/*map more blocks*/ | 
 | 		while (count < maxblocks && count <= blocks_to_boundary) { | 
 | 			ext4_fsblk_t blk; | 
 |  | 
 | 			blk = le32_to_cpu(*(chain[depth-1].p + count)); | 
 |  | 
 | 			if (blk == first_block + count) | 
 | 				count++; | 
 | 			else | 
 | 				break; | 
 | 		} | 
 | 		goto got_it; | 
 | 	} | 
 |  | 
 | 	/* Next simple case - plain lookup or failed read of indirect block */ | 
 | 	if ((flags & EXT4_GET_BLOCKS_CREATE) == 0 || err == -EIO) | 
 | 		goto cleanup; | 
 |  | 
 | 	/* | 
 | 	 * Okay, we need to do block allocation. | 
 | 	*/ | 
 | 	goal = ext4_find_goal(inode, iblock, partial); | 
 |  | 
 | 	/* the number of blocks need to allocate for [d,t]indirect blocks */ | 
 | 	indirect_blks = (chain + depth) - partial - 1; | 
 |  | 
 | 	/* | 
 | 	 * Next look up the indirect map to count the totoal number of | 
 | 	 * direct blocks to allocate for this branch. | 
 | 	 */ | 
 | 	count = ext4_blks_to_allocate(partial, indirect_blks, | 
 | 					maxblocks, blocks_to_boundary); | 
 | 	/* | 
 | 	 * Block out ext4_truncate while we alter the tree | 
 | 	 */ | 
 | 	err = ext4_alloc_branch(handle, inode, iblock, indirect_blks, | 
 | 				&count, goal, | 
 | 				offsets + (partial - chain), partial); | 
 |  | 
 | 	/* | 
 | 	 * The ext4_splice_branch call will free and forget any buffers | 
 | 	 * on the new chain if there is a failure, but that risks using | 
 | 	 * up transaction credits, especially for bitmaps where the | 
 | 	 * credits cannot be returned.  Can we handle this somehow?  We | 
 | 	 * may need to return -EAGAIN upwards in the worst case.  --sct | 
 | 	 */ | 
 | 	if (!err) | 
 | 		err = ext4_splice_branch(handle, inode, iblock, | 
 | 					 partial, indirect_blks, count); | 
 | 	else | 
 | 		goto cleanup; | 
 |  | 
 | 	set_buffer_new(bh_result); | 
 | got_it: | 
 | 	map_bh(bh_result, inode->i_sb, le32_to_cpu(chain[depth-1].key)); | 
 | 	if (count > blocks_to_boundary) | 
 | 		set_buffer_boundary(bh_result); | 
 | 	err = count; | 
 | 	/* Clean up and exit */ | 
 | 	partial = chain + depth - 1;	/* the whole chain */ | 
 | cleanup: | 
 | 	while (partial > chain) { | 
 | 		BUFFER_TRACE(partial->bh, "call brelse"); | 
 | 		brelse(partial->bh); | 
 | 		partial--; | 
 | 	} | 
 | 	BUFFER_TRACE(bh_result, "returned"); | 
 | out: | 
 | 	return err; | 
 | } | 
 |  | 
 | qsize_t ext4_get_reserved_space(struct inode *inode) | 
 | { | 
 | 	unsigned long long total; | 
 |  | 
 | 	spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | 
 | 	total = EXT4_I(inode)->i_reserved_data_blocks + | 
 | 		EXT4_I(inode)->i_reserved_meta_blocks; | 
 | 	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | 
 |  | 
 | 	return total; | 
 | } | 
 | /* | 
 |  * Calculate the number of metadata blocks need to reserve | 
 |  * to allocate @blocks for non extent file based file | 
 |  */ | 
 | static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks) | 
 | { | 
 | 	int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
 | 	int ind_blks, dind_blks, tind_blks; | 
 |  | 
 | 	/* number of new indirect blocks needed */ | 
 | 	ind_blks = (blocks + icap - 1) / icap; | 
 |  | 
 | 	dind_blks = (ind_blks + icap - 1) / icap; | 
 |  | 
 | 	tind_blks = 1; | 
 |  | 
 | 	return ind_blks + dind_blks + tind_blks; | 
 | } | 
 |  | 
 | /* | 
 |  * Calculate the number of metadata blocks need to reserve | 
 |  * to allocate given number of blocks | 
 |  */ | 
 | static int ext4_calc_metadata_amount(struct inode *inode, int blocks) | 
 | { | 
 | 	if (!blocks) | 
 | 		return 0; | 
 |  | 
 | 	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) | 
 | 		return ext4_ext_calc_metadata_amount(inode, blocks); | 
 |  | 
 | 	return ext4_indirect_calc_metadata_amount(inode, blocks); | 
 | } | 
 |  | 
 | static void ext4_da_update_reserve_space(struct inode *inode, int used) | 
 | { | 
 | 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
 | 	int total, mdb, mdb_free; | 
 |  | 
 | 	spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | 
 | 	/* recalculate the number of metablocks still need to be reserved */ | 
 | 	total = EXT4_I(inode)->i_reserved_data_blocks - used; | 
 | 	mdb = ext4_calc_metadata_amount(inode, total); | 
 |  | 
 | 	/* figure out how many metablocks to release */ | 
 | 	BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); | 
 | 	mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; | 
 |  | 
 | 	if (mdb_free) { | 
 | 		/* Account for allocated meta_blocks */ | 
 | 		mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks; | 
 |  | 
 | 		/* update fs dirty blocks counter */ | 
 | 		percpu_counter_sub(&sbi->s_dirtyblocks_counter, mdb_free); | 
 | 		EXT4_I(inode)->i_allocated_meta_blocks = 0; | 
 | 		EXT4_I(inode)->i_reserved_meta_blocks = mdb; | 
 | 	} | 
 |  | 
 | 	/* update per-inode reservations */ | 
 | 	BUG_ON(used  > EXT4_I(inode)->i_reserved_data_blocks); | 
 | 	EXT4_I(inode)->i_reserved_data_blocks -= used; | 
 | 	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | 
 |  | 
 | 	/* | 
 | 	 * free those over-booking quota for metadata blocks | 
 | 	 */ | 
 | 	if (mdb_free) | 
 | 		vfs_dq_release_reservation_block(inode, mdb_free); | 
 |  | 
 | 	/* | 
 | 	 * If we have done all the pending block allocations and if | 
 | 	 * there aren't any writers on the inode, we can discard the | 
 | 	 * inode's preallocations. | 
 | 	 */ | 
 | 	if (!total && (atomic_read(&inode->i_writecount) == 0)) | 
 | 		ext4_discard_preallocations(inode); | 
 | } | 
 |  | 
 | static int check_block_validity(struct inode *inode, sector_t logical, | 
 | 				sector_t phys, int len) | 
 | { | 
 | 	if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), phys, len)) { | 
 | 		ext4_error(inode->i_sb, "check_block_validity", | 
 | 			   "inode #%lu logical block %llu mapped to %llu " | 
 | 			   "(size %d)", inode->i_ino, | 
 | 			   (unsigned long long) logical, | 
 | 			   (unsigned long long) phys, len); | 
 | 		WARN_ON(1); | 
 | 		return -EIO; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * The ext4_get_blocks() function tries to look up the requested blocks, | 
 |  * and returns if the blocks are already mapped. | 
 |  * | 
 |  * Otherwise it takes the write lock of the i_data_sem and allocate blocks | 
 |  * and store the allocated blocks in the result buffer head and mark it | 
 |  * mapped. | 
 |  * | 
 |  * If file type is extents based, it will call ext4_ext_get_blocks(), | 
 |  * Otherwise, call with ext4_ind_get_blocks() to handle indirect mapping | 
 |  * based files | 
 |  * | 
 |  * On success, it returns the number of blocks being mapped or allocate. | 
 |  * if create==0 and the blocks are pre-allocated and uninitialized block, | 
 |  * the result buffer head is unmapped. If the create ==1, it will make sure | 
 |  * the buffer head is mapped. | 
 |  * | 
 |  * It returns 0 if plain look up failed (blocks have not been allocated), in | 
 |  * that casem, buffer head is unmapped | 
 |  * | 
 |  * It returns the error in case of allocation failure. | 
 |  */ | 
 | int ext4_get_blocks(handle_t *handle, struct inode *inode, sector_t block, | 
 | 		    unsigned int max_blocks, struct buffer_head *bh, | 
 | 		    int flags) | 
 | { | 
 | 	int retval; | 
 |  | 
 | 	clear_buffer_mapped(bh); | 
 | 	clear_buffer_unwritten(bh); | 
 |  | 
 | 	/* | 
 | 	 * Try to see if we can get the block without requesting a new | 
 | 	 * file system block. | 
 | 	 */ | 
 | 	down_read((&EXT4_I(inode)->i_data_sem)); | 
 | 	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) { | 
 | 		retval =  ext4_ext_get_blocks(handle, inode, block, max_blocks, | 
 | 				bh, 0); | 
 | 	} else { | 
 | 		retval = ext4_ind_get_blocks(handle, inode, block, max_blocks, | 
 | 					     bh, 0); | 
 | 	} | 
 | 	up_read((&EXT4_I(inode)->i_data_sem)); | 
 |  | 
 | 	if (retval > 0 && buffer_mapped(bh)) { | 
 | 		int ret = check_block_validity(inode, block, | 
 | 					       bh->b_blocknr, retval); | 
 | 		if (ret != 0) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	/* If it is only a block(s) look up */ | 
 | 	if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) | 
 | 		return retval; | 
 |  | 
 | 	/* | 
 | 	 * Returns if the blocks have already allocated | 
 | 	 * | 
 | 	 * Note that if blocks have been preallocated | 
 | 	 * ext4_ext_get_block() returns th create = 0 | 
 | 	 * with buffer head unmapped. | 
 | 	 */ | 
 | 	if (retval > 0 && buffer_mapped(bh)) | 
 | 		return retval; | 
 |  | 
 | 	/* | 
 | 	 * When we call get_blocks without the create flag, the | 
 | 	 * BH_Unwritten flag could have gotten set if the blocks | 
 | 	 * requested were part of a uninitialized extent.  We need to | 
 | 	 * clear this flag now that we are committed to convert all or | 
 | 	 * part of the uninitialized extent to be an initialized | 
 | 	 * extent.  This is because we need to avoid the combination | 
 | 	 * of BH_Unwritten and BH_Mapped flags being simultaneously | 
 | 	 * set on the buffer_head. | 
 | 	 */ | 
 | 	clear_buffer_unwritten(bh); | 
 |  | 
 | 	/* | 
 | 	 * New blocks allocate and/or writing to uninitialized extent | 
 | 	 * will possibly result in updating i_data, so we take | 
 | 	 * the write lock of i_data_sem, and call get_blocks() | 
 | 	 * with create == 1 flag. | 
 | 	 */ | 
 | 	down_write((&EXT4_I(inode)->i_data_sem)); | 
 |  | 
 | 	/* | 
 | 	 * if the caller is from delayed allocation writeout path | 
 | 	 * we have already reserved fs blocks for allocation | 
 | 	 * let the underlying get_block() function know to | 
 | 	 * avoid double accounting | 
 | 	 */ | 
 | 	if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) | 
 | 		EXT4_I(inode)->i_delalloc_reserved_flag = 1; | 
 | 	/* | 
 | 	 * We need to check for EXT4 here because migrate | 
 | 	 * could have changed the inode type in between | 
 | 	 */ | 
 | 	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) { | 
 | 		retval =  ext4_ext_get_blocks(handle, inode, block, max_blocks, | 
 | 					      bh, flags); | 
 | 	} else { | 
 | 		retval = ext4_ind_get_blocks(handle, inode, block, | 
 | 					     max_blocks, bh, flags); | 
 |  | 
 | 		if (retval > 0 && buffer_new(bh)) { | 
 | 			/* | 
 | 			 * We allocated new blocks which will result in | 
 | 			 * i_data's format changing.  Force the migrate | 
 | 			 * to fail by clearing migrate flags | 
 | 			 */ | 
 | 			EXT4_I(inode)->i_flags = EXT4_I(inode)->i_flags & | 
 | 							~EXT4_EXT_MIGRATE; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) | 
 | 		EXT4_I(inode)->i_delalloc_reserved_flag = 0; | 
 |  | 
 | 	/* | 
 | 	 * Update reserved blocks/metadata blocks after successful | 
 | 	 * block allocation which had been deferred till now. | 
 | 	 */ | 
 | 	if ((retval > 0) && (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE)) | 
 | 		ext4_da_update_reserve_space(inode, retval); | 
 |  | 
 | 	up_write((&EXT4_I(inode)->i_data_sem)); | 
 | 	if (retval > 0 && buffer_mapped(bh)) { | 
 | 		int ret = check_block_validity(inode, block, | 
 | 					       bh->b_blocknr, retval); | 
 | 		if (ret != 0) | 
 | 			return ret; | 
 | 	} | 
 | 	return retval; | 
 | } | 
 |  | 
 | /* Maximum number of blocks we map for direct IO at once. */ | 
 | #define DIO_MAX_BLOCKS 4096 | 
 |  | 
 | int ext4_get_block(struct inode *inode, sector_t iblock, | 
 | 		   struct buffer_head *bh_result, int create) | 
 | { | 
 | 	handle_t *handle = ext4_journal_current_handle(); | 
 | 	int ret = 0, started = 0; | 
 | 	unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; | 
 | 	int dio_credits; | 
 |  | 
 | 	if (create && !handle) { | 
 | 		/* Direct IO write... */ | 
 | 		if (max_blocks > DIO_MAX_BLOCKS) | 
 | 			max_blocks = DIO_MAX_BLOCKS; | 
 | 		dio_credits = ext4_chunk_trans_blocks(inode, max_blocks); | 
 | 		handle = ext4_journal_start(inode, dio_credits); | 
 | 		if (IS_ERR(handle)) { | 
 | 			ret = PTR_ERR(handle); | 
 | 			goto out; | 
 | 		} | 
 | 		started = 1; | 
 | 	} | 
 |  | 
 | 	ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result, | 
 | 			      create ? EXT4_GET_BLOCKS_CREATE : 0); | 
 | 	if (ret > 0) { | 
 | 		bh_result->b_size = (ret << inode->i_blkbits); | 
 | 		ret = 0; | 
 | 	} | 
 | 	if (started) | 
 | 		ext4_journal_stop(handle); | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * `handle' can be NULL if create is zero | 
 |  */ | 
 | struct buffer_head *ext4_getblk(handle_t *handle, struct inode *inode, | 
 | 				ext4_lblk_t block, int create, int *errp) | 
 | { | 
 | 	struct buffer_head dummy; | 
 | 	int fatal = 0, err; | 
 | 	int flags = 0; | 
 |  | 
 | 	J_ASSERT(handle != NULL || create == 0); | 
 |  | 
 | 	dummy.b_state = 0; | 
 | 	dummy.b_blocknr = -1000; | 
 | 	buffer_trace_init(&dummy.b_history); | 
 | 	if (create) | 
 | 		flags |= EXT4_GET_BLOCKS_CREATE; | 
 | 	err = ext4_get_blocks(handle, inode, block, 1, &dummy, flags); | 
 | 	/* | 
 | 	 * ext4_get_blocks() returns number of blocks mapped. 0 in | 
 | 	 * case of a HOLE. | 
 | 	 */ | 
 | 	if (err > 0) { | 
 | 		if (err > 1) | 
 | 			WARN_ON(1); | 
 | 		err = 0; | 
 | 	} | 
 | 	*errp = err; | 
 | 	if (!err && buffer_mapped(&dummy)) { | 
 | 		struct buffer_head *bh; | 
 | 		bh = sb_getblk(inode->i_sb, dummy.b_blocknr); | 
 | 		if (!bh) { | 
 | 			*errp = -EIO; | 
 | 			goto err; | 
 | 		} | 
 | 		if (buffer_new(&dummy)) { | 
 | 			J_ASSERT(create != 0); | 
 | 			J_ASSERT(handle != NULL); | 
 |  | 
 | 			/* | 
 | 			 * Now that we do not always journal data, we should | 
 | 			 * keep in mind whether this should always journal the | 
 | 			 * new buffer as metadata.  For now, regular file | 
 | 			 * writes use ext4_get_block instead, so it's not a | 
 | 			 * problem. | 
 | 			 */ | 
 | 			lock_buffer(bh); | 
 | 			BUFFER_TRACE(bh, "call get_create_access"); | 
 | 			fatal = ext4_journal_get_create_access(handle, bh); | 
 | 			if (!fatal && !buffer_uptodate(bh)) { | 
 | 				memset(bh->b_data, 0, inode->i_sb->s_blocksize); | 
 | 				set_buffer_uptodate(bh); | 
 | 			} | 
 | 			unlock_buffer(bh); | 
 | 			BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | 
 | 			err = ext4_handle_dirty_metadata(handle, inode, bh); | 
 | 			if (!fatal) | 
 | 				fatal = err; | 
 | 		} else { | 
 | 			BUFFER_TRACE(bh, "not a new buffer"); | 
 | 		} | 
 | 		if (fatal) { | 
 | 			*errp = fatal; | 
 | 			brelse(bh); | 
 | 			bh = NULL; | 
 | 		} | 
 | 		return bh; | 
 | 	} | 
 | err: | 
 | 	return NULL; | 
 | } | 
 |  | 
 | struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode, | 
 | 			       ext4_lblk_t block, int create, int *err) | 
 | { | 
 | 	struct buffer_head *bh; | 
 |  | 
 | 	bh = ext4_getblk(handle, inode, block, create, err); | 
 | 	if (!bh) | 
 | 		return bh; | 
 | 	if (buffer_uptodate(bh)) | 
 | 		return bh; | 
 | 	ll_rw_block(READ_META, 1, &bh); | 
 | 	wait_on_buffer(bh); | 
 | 	if (buffer_uptodate(bh)) | 
 | 		return bh; | 
 | 	put_bh(bh); | 
 | 	*err = -EIO; | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static int walk_page_buffers(handle_t *handle, | 
 | 			     struct buffer_head *head, | 
 | 			     unsigned from, | 
 | 			     unsigned to, | 
 | 			     int *partial, | 
 | 			     int (*fn)(handle_t *handle, | 
 | 				       struct buffer_head *bh)) | 
 | { | 
 | 	struct buffer_head *bh; | 
 | 	unsigned block_start, block_end; | 
 | 	unsigned blocksize = head->b_size; | 
 | 	int err, ret = 0; | 
 | 	struct buffer_head *next; | 
 |  | 
 | 	for (bh = head, block_start = 0; | 
 | 	     ret == 0 && (bh != head || !block_start); | 
 | 	     block_start = block_end, bh = next) { | 
 | 		next = bh->b_this_page; | 
 | 		block_end = block_start + blocksize; | 
 | 		if (block_end <= from || block_start >= to) { | 
 | 			if (partial && !buffer_uptodate(bh)) | 
 | 				*partial = 1; | 
 | 			continue; | 
 | 		} | 
 | 		err = (*fn)(handle, bh); | 
 | 		if (!ret) | 
 | 			ret = err; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * To preserve ordering, it is essential that the hole instantiation and | 
 |  * the data write be encapsulated in a single transaction.  We cannot | 
 |  * close off a transaction and start a new one between the ext4_get_block() | 
 |  * and the commit_write().  So doing the jbd2_journal_start at the start of | 
 |  * prepare_write() is the right place. | 
 |  * | 
 |  * Also, this function can nest inside ext4_writepage() -> | 
 |  * block_write_full_page(). In that case, we *know* that ext4_writepage() | 
 |  * has generated enough buffer credits to do the whole page.  So we won't | 
 |  * block on the journal in that case, which is good, because the caller may | 
 |  * be PF_MEMALLOC. | 
 |  * | 
 |  * By accident, ext4 can be reentered when a transaction is open via | 
 |  * quota file writes.  If we were to commit the transaction while thus | 
 |  * reentered, there can be a deadlock - we would be holding a quota | 
 |  * lock, and the commit would never complete if another thread had a | 
 |  * transaction open and was blocking on the quota lock - a ranking | 
 |  * violation. | 
 |  * | 
 |  * So what we do is to rely on the fact that jbd2_journal_stop/journal_start | 
 |  * will _not_ run commit under these circumstances because handle->h_ref | 
 |  * is elevated.  We'll still have enough credits for the tiny quotafile | 
 |  * write. | 
 |  */ | 
 | static int do_journal_get_write_access(handle_t *handle, | 
 | 				       struct buffer_head *bh) | 
 | { | 
 | 	if (!buffer_mapped(bh) || buffer_freed(bh)) | 
 | 		return 0; | 
 | 	return ext4_journal_get_write_access(handle, bh); | 
 | } | 
 |  | 
 | static int ext4_write_begin(struct file *file, struct address_space *mapping, | 
 | 			    loff_t pos, unsigned len, unsigned flags, | 
 | 			    struct page **pagep, void **fsdata) | 
 | { | 
 | 	struct inode *inode = mapping->host; | 
 | 	int ret, needed_blocks; | 
 | 	handle_t *handle; | 
 | 	int retries = 0; | 
 | 	struct page *page; | 
 | 	pgoff_t index; | 
 | 	unsigned from, to; | 
 |  | 
 | 	trace_ext4_write_begin(inode, pos, len, flags); | 
 | 	/* | 
 | 	 * Reserve one block more for addition to orphan list in case | 
 | 	 * we allocate blocks but write fails for some reason | 
 | 	 */ | 
 | 	needed_blocks = ext4_writepage_trans_blocks(inode) + 1; | 
 | 	index = pos >> PAGE_CACHE_SHIFT; | 
 | 	from = pos & (PAGE_CACHE_SIZE - 1); | 
 | 	to = from + len; | 
 |  | 
 | retry: | 
 | 	handle = ext4_journal_start(inode, needed_blocks); | 
 | 	if (IS_ERR(handle)) { | 
 | 		ret = PTR_ERR(handle); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* We cannot recurse into the filesystem as the transaction is already | 
 | 	 * started */ | 
 | 	flags |= AOP_FLAG_NOFS; | 
 |  | 
 | 	page = grab_cache_page_write_begin(mapping, index, flags); | 
 | 	if (!page) { | 
 | 		ext4_journal_stop(handle); | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 | 	*pagep = page; | 
 |  | 
 | 	ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata, | 
 | 				ext4_get_block); | 
 |  | 
 | 	if (!ret && ext4_should_journal_data(inode)) { | 
 | 		ret = walk_page_buffers(handle, page_buffers(page), | 
 | 				from, to, NULL, do_journal_get_write_access); | 
 | 	} | 
 |  | 
 | 	if (ret) { | 
 | 		unlock_page(page); | 
 | 		page_cache_release(page); | 
 | 		/* | 
 | 		 * block_write_begin may have instantiated a few blocks | 
 | 		 * outside i_size.  Trim these off again. Don't need | 
 | 		 * i_size_read because we hold i_mutex. | 
 | 		 * | 
 | 		 * Add inode to orphan list in case we crash before | 
 | 		 * truncate finishes | 
 | 		 */ | 
 | 		if (pos + len > inode->i_size && ext4_can_truncate(inode)) | 
 | 			ext4_orphan_add(handle, inode); | 
 |  | 
 | 		ext4_journal_stop(handle); | 
 | 		if (pos + len > inode->i_size) { | 
 | 			ext4_truncate(inode); | 
 | 			/* | 
 | 			 * If truncate failed early the inode might | 
 | 			 * still be on the orphan list; we need to | 
 | 			 * make sure the inode is removed from the | 
 | 			 * orphan list in that case. | 
 | 			 */ | 
 | 			if (inode->i_nlink) | 
 | 				ext4_orphan_del(NULL, inode); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) | 
 | 		goto retry; | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* For write_end() in data=journal mode */ | 
 | static int write_end_fn(handle_t *handle, struct buffer_head *bh) | 
 | { | 
 | 	if (!buffer_mapped(bh) || buffer_freed(bh)) | 
 | 		return 0; | 
 | 	set_buffer_uptodate(bh); | 
 | 	return ext4_handle_dirty_metadata(handle, NULL, bh); | 
 | } | 
 |  | 
 | static int ext4_generic_write_end(struct file *file, | 
 | 				  struct address_space *mapping, | 
 | 				  loff_t pos, unsigned len, unsigned copied, | 
 | 				  struct page *page, void *fsdata) | 
 | { | 
 | 	int i_size_changed = 0; | 
 | 	struct inode *inode = mapping->host; | 
 | 	handle_t *handle = ext4_journal_current_handle(); | 
 |  | 
 | 	copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); | 
 |  | 
 | 	/* | 
 | 	 * No need to use i_size_read() here, the i_size | 
 | 	 * cannot change under us because we hold i_mutex. | 
 | 	 * | 
 | 	 * But it's important to update i_size while still holding page lock: | 
 | 	 * page writeout could otherwise come in and zero beyond i_size. | 
 | 	 */ | 
 | 	if (pos + copied > inode->i_size) { | 
 | 		i_size_write(inode, pos + copied); | 
 | 		i_size_changed = 1; | 
 | 	} | 
 |  | 
 | 	if (pos + copied >  EXT4_I(inode)->i_disksize) { | 
 | 		/* We need to mark inode dirty even if | 
 | 		 * new_i_size is less that inode->i_size | 
 | 		 * bu greater than i_disksize.(hint delalloc) | 
 | 		 */ | 
 | 		ext4_update_i_disksize(inode, (pos + copied)); | 
 | 		i_size_changed = 1; | 
 | 	} | 
 | 	unlock_page(page); | 
 | 	page_cache_release(page); | 
 |  | 
 | 	/* | 
 | 	 * Don't mark the inode dirty under page lock. First, it unnecessarily | 
 | 	 * makes the holding time of page lock longer. Second, it forces lock | 
 | 	 * ordering of page lock and transaction start for journaling | 
 | 	 * filesystems. | 
 | 	 */ | 
 | 	if (i_size_changed) | 
 | 		ext4_mark_inode_dirty(handle, inode); | 
 |  | 
 | 	return copied; | 
 | } | 
 |  | 
 | /* | 
 |  * We need to pick up the new inode size which generic_commit_write gave us | 
 |  * `file' can be NULL - eg, when called from page_symlink(). | 
 |  * | 
 |  * ext4 never places buffers on inode->i_mapping->private_list.  metadata | 
 |  * buffers are managed internally. | 
 |  */ | 
 | static int ext4_ordered_write_end(struct file *file, | 
 | 				  struct address_space *mapping, | 
 | 				  loff_t pos, unsigned len, unsigned copied, | 
 | 				  struct page *page, void *fsdata) | 
 | { | 
 | 	handle_t *handle = ext4_journal_current_handle(); | 
 | 	struct inode *inode = mapping->host; | 
 | 	int ret = 0, ret2; | 
 |  | 
 | 	trace_ext4_ordered_write_end(inode, pos, len, copied); | 
 | 	ret = ext4_jbd2_file_inode(handle, inode); | 
 |  | 
 | 	if (ret == 0) { | 
 | 		ret2 = ext4_generic_write_end(file, mapping, pos, len, copied, | 
 | 							page, fsdata); | 
 | 		copied = ret2; | 
 | 		if (pos + len > inode->i_size && ext4_can_truncate(inode)) | 
 | 			/* if we have allocated more blocks and copied | 
 | 			 * less. We will have blocks allocated outside | 
 | 			 * inode->i_size. So truncate them | 
 | 			 */ | 
 | 			ext4_orphan_add(handle, inode); | 
 | 		if (ret2 < 0) | 
 | 			ret = ret2; | 
 | 	} | 
 | 	ret2 = ext4_journal_stop(handle); | 
 | 	if (!ret) | 
 | 		ret = ret2; | 
 |  | 
 | 	if (pos + len > inode->i_size) { | 
 | 		ext4_truncate(inode); | 
 | 		/* | 
 | 		 * If truncate failed early the inode might still be | 
 | 		 * on the orphan list; we need to make sure the inode | 
 | 		 * is removed from the orphan list in that case. | 
 | 		 */ | 
 | 		if (inode->i_nlink) | 
 | 			ext4_orphan_del(NULL, inode); | 
 | 	} | 
 |  | 
 |  | 
 | 	return ret ? ret : copied; | 
 | } | 
 |  | 
 | static int ext4_writeback_write_end(struct file *file, | 
 | 				    struct address_space *mapping, | 
 | 				    loff_t pos, unsigned len, unsigned copied, | 
 | 				    struct page *page, void *fsdata) | 
 | { | 
 | 	handle_t *handle = ext4_journal_current_handle(); | 
 | 	struct inode *inode = mapping->host; | 
 | 	int ret = 0, ret2; | 
 |  | 
 | 	trace_ext4_writeback_write_end(inode, pos, len, copied); | 
 | 	ret2 = ext4_generic_write_end(file, mapping, pos, len, copied, | 
 | 							page, fsdata); | 
 | 	copied = ret2; | 
 | 	if (pos + len > inode->i_size && ext4_can_truncate(inode)) | 
 | 		/* if we have allocated more blocks and copied | 
 | 		 * less. We will have blocks allocated outside | 
 | 		 * inode->i_size. So truncate them | 
 | 		 */ | 
 | 		ext4_orphan_add(handle, inode); | 
 |  | 
 | 	if (ret2 < 0) | 
 | 		ret = ret2; | 
 |  | 
 | 	ret2 = ext4_journal_stop(handle); | 
 | 	if (!ret) | 
 | 		ret = ret2; | 
 |  | 
 | 	if (pos + len > inode->i_size) { | 
 | 		ext4_truncate(inode); | 
 | 		/* | 
 | 		 * If truncate failed early the inode might still be | 
 | 		 * on the orphan list; we need to make sure the inode | 
 | 		 * is removed from the orphan list in that case. | 
 | 		 */ | 
 | 		if (inode->i_nlink) | 
 | 			ext4_orphan_del(NULL, inode); | 
 | 	} | 
 |  | 
 | 	return ret ? ret : copied; | 
 | } | 
 |  | 
 | static int ext4_journalled_write_end(struct file *file, | 
 | 				     struct address_space *mapping, | 
 | 				     loff_t pos, unsigned len, unsigned copied, | 
 | 				     struct page *page, void *fsdata) | 
 | { | 
 | 	handle_t *handle = ext4_journal_current_handle(); | 
 | 	struct inode *inode = mapping->host; | 
 | 	int ret = 0, ret2; | 
 | 	int partial = 0; | 
 | 	unsigned from, to; | 
 | 	loff_t new_i_size; | 
 |  | 
 | 	trace_ext4_journalled_write_end(inode, pos, len, copied); | 
 | 	from = pos & (PAGE_CACHE_SIZE - 1); | 
 | 	to = from + len; | 
 |  | 
 | 	if (copied < len) { | 
 | 		if (!PageUptodate(page)) | 
 | 			copied = 0; | 
 | 		page_zero_new_buffers(page, from+copied, to); | 
 | 	} | 
 |  | 
 | 	ret = walk_page_buffers(handle, page_buffers(page), from, | 
 | 				to, &partial, write_end_fn); | 
 | 	if (!partial) | 
 | 		SetPageUptodate(page); | 
 | 	new_i_size = pos + copied; | 
 | 	if (new_i_size > inode->i_size) | 
 | 		i_size_write(inode, pos+copied); | 
 | 	EXT4_I(inode)->i_state |= EXT4_STATE_JDATA; | 
 | 	if (new_i_size > EXT4_I(inode)->i_disksize) { | 
 | 		ext4_update_i_disksize(inode, new_i_size); | 
 | 		ret2 = ext4_mark_inode_dirty(handle, inode); | 
 | 		if (!ret) | 
 | 			ret = ret2; | 
 | 	} | 
 |  | 
 | 	unlock_page(page); | 
 | 	page_cache_release(page); | 
 | 	if (pos + len > inode->i_size && ext4_can_truncate(inode)) | 
 | 		/* if we have allocated more blocks and copied | 
 | 		 * less. We will have blocks allocated outside | 
 | 		 * inode->i_size. So truncate them | 
 | 		 */ | 
 | 		ext4_orphan_add(handle, inode); | 
 |  | 
 | 	ret2 = ext4_journal_stop(handle); | 
 | 	if (!ret) | 
 | 		ret = ret2; | 
 | 	if (pos + len > inode->i_size) { | 
 | 		ext4_truncate(inode); | 
 | 		/* | 
 | 		 * If truncate failed early the inode might still be | 
 | 		 * on the orphan list; we need to make sure the inode | 
 | 		 * is removed from the orphan list in that case. | 
 | 		 */ | 
 | 		if (inode->i_nlink) | 
 | 			ext4_orphan_del(NULL, inode); | 
 | 	} | 
 |  | 
 | 	return ret ? ret : copied; | 
 | } | 
 |  | 
 | static int ext4_da_reserve_space(struct inode *inode, int nrblocks) | 
 | { | 
 | 	int retries = 0; | 
 | 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
 | 	unsigned long md_needed, mdblocks, total = 0; | 
 |  | 
 | 	/* | 
 | 	 * recalculate the amount of metadata blocks to reserve | 
 | 	 * in order to allocate nrblocks | 
 | 	 * worse case is one extent per block | 
 | 	 */ | 
 | repeat: | 
 | 	spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | 
 | 	total = EXT4_I(inode)->i_reserved_data_blocks + nrblocks; | 
 | 	mdblocks = ext4_calc_metadata_amount(inode, total); | 
 | 	BUG_ON(mdblocks < EXT4_I(inode)->i_reserved_meta_blocks); | 
 |  | 
 | 	md_needed = mdblocks - EXT4_I(inode)->i_reserved_meta_blocks; | 
 | 	total = md_needed + nrblocks; | 
 |  | 
 | 	/* | 
 | 	 * Make quota reservation here to prevent quota overflow | 
 | 	 * later. Real quota accounting is done at pages writeout | 
 | 	 * time. | 
 | 	 */ | 
 | 	if (vfs_dq_reserve_block(inode, total)) { | 
 | 		spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | 
 | 		return -EDQUOT; | 
 | 	} | 
 |  | 
 | 	if (ext4_claim_free_blocks(sbi, total)) { | 
 | 		spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | 
 | 		if (ext4_should_retry_alloc(inode->i_sb, &retries)) { | 
 | 			yield(); | 
 | 			goto repeat; | 
 | 		} | 
 | 		vfs_dq_release_reservation_block(inode, total); | 
 | 		return -ENOSPC; | 
 | 	} | 
 | 	EXT4_I(inode)->i_reserved_data_blocks += nrblocks; | 
 | 	EXT4_I(inode)->i_reserved_meta_blocks = mdblocks; | 
 |  | 
 | 	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | 
 | 	return 0;       /* success */ | 
 | } | 
 |  | 
 | static void ext4_da_release_space(struct inode *inode, int to_free) | 
 | { | 
 | 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
 | 	int total, mdb, mdb_free, release; | 
 |  | 
 | 	if (!to_free) | 
 | 		return;		/* Nothing to release, exit */ | 
 |  | 
 | 	spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | 
 |  | 
 | 	if (!EXT4_I(inode)->i_reserved_data_blocks) { | 
 | 		/* | 
 | 		 * if there is no reserved blocks, but we try to free some | 
 | 		 * then the counter is messed up somewhere. | 
 | 		 * but since this function is called from invalidate | 
 | 		 * page, it's harmless to return without any action | 
 | 		 */ | 
 | 		printk(KERN_INFO "ext4 delalloc try to release %d reserved " | 
 | 			    "blocks for inode %lu, but there is no reserved " | 
 | 			    "data blocks\n", to_free, inode->i_ino); | 
 | 		spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* recalculate the number of metablocks still need to be reserved */ | 
 | 	total = EXT4_I(inode)->i_reserved_data_blocks - to_free; | 
 | 	mdb = ext4_calc_metadata_amount(inode, total); | 
 |  | 
 | 	/* figure out how many metablocks to release */ | 
 | 	BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); | 
 | 	mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; | 
 |  | 
 | 	release = to_free + mdb_free; | 
 |  | 
 | 	/* update fs dirty blocks counter for truncate case */ | 
 | 	percpu_counter_sub(&sbi->s_dirtyblocks_counter, release); | 
 |  | 
 | 	/* update per-inode reservations */ | 
 | 	BUG_ON(to_free > EXT4_I(inode)->i_reserved_data_blocks); | 
 | 	EXT4_I(inode)->i_reserved_data_blocks -= to_free; | 
 |  | 
 | 	BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); | 
 | 	EXT4_I(inode)->i_reserved_meta_blocks = mdb; | 
 | 	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | 
 |  | 
 | 	vfs_dq_release_reservation_block(inode, release); | 
 | } | 
 |  | 
 | static void ext4_da_page_release_reservation(struct page *page, | 
 | 					     unsigned long offset) | 
 | { | 
 | 	int to_release = 0; | 
 | 	struct buffer_head *head, *bh; | 
 | 	unsigned int curr_off = 0; | 
 |  | 
 | 	head = page_buffers(page); | 
 | 	bh = head; | 
 | 	do { | 
 | 		unsigned int next_off = curr_off + bh->b_size; | 
 |  | 
 | 		if ((offset <= curr_off) && (buffer_delay(bh))) { | 
 | 			to_release++; | 
 | 			clear_buffer_delay(bh); | 
 | 		} | 
 | 		curr_off = next_off; | 
 | 	} while ((bh = bh->b_this_page) != head); | 
 | 	ext4_da_release_space(page->mapping->host, to_release); | 
 | } | 
 |  | 
 | /* | 
 |  * Delayed allocation stuff | 
 |  */ | 
 |  | 
 | struct mpage_da_data { | 
 | 	struct inode *inode; | 
 | 	sector_t b_blocknr;		/* start block number of extent */ | 
 | 	size_t b_size;			/* size of extent */ | 
 | 	unsigned long b_state;		/* state of the extent */ | 
 | 	unsigned long first_page, next_page;	/* extent of pages */ | 
 | 	struct writeback_control *wbc; | 
 | 	int io_done; | 
 | 	int pages_written; | 
 | 	int retval; | 
 | }; | 
 |  | 
 | /* | 
 |  * mpage_da_submit_io - walks through extent of pages and try to write | 
 |  * them with writepage() call back | 
 |  * | 
 |  * @mpd->inode: inode | 
 |  * @mpd->first_page: first page of the extent | 
 |  * @mpd->next_page: page after the last page of the extent | 
 |  * | 
 |  * By the time mpage_da_submit_io() is called we expect all blocks | 
 |  * to be allocated. this may be wrong if allocation failed. | 
 |  * | 
 |  * As pages are already locked by write_cache_pages(), we can't use it | 
 |  */ | 
 | static int mpage_da_submit_io(struct mpage_da_data *mpd) | 
 | { | 
 | 	long pages_skipped; | 
 | 	struct pagevec pvec; | 
 | 	unsigned long index, end; | 
 | 	int ret = 0, err, nr_pages, i; | 
 | 	struct inode *inode = mpd->inode; | 
 | 	struct address_space *mapping = inode->i_mapping; | 
 |  | 
 | 	BUG_ON(mpd->next_page <= mpd->first_page); | 
 | 	/* | 
 | 	 * We need to start from the first_page to the next_page - 1 | 
 | 	 * to make sure we also write the mapped dirty buffer_heads. | 
 | 	 * If we look at mpd->b_blocknr we would only be looking | 
 | 	 * at the currently mapped buffer_heads. | 
 | 	 */ | 
 | 	index = mpd->first_page; | 
 | 	end = mpd->next_page - 1; | 
 |  | 
 | 	pagevec_init(&pvec, 0); | 
 | 	while (index <= end) { | 
 | 		nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE); | 
 | 		if (nr_pages == 0) | 
 | 			break; | 
 | 		for (i = 0; i < nr_pages; i++) { | 
 | 			struct page *page = pvec.pages[i]; | 
 |  | 
 | 			index = page->index; | 
 | 			if (index > end) | 
 | 				break; | 
 | 			index++; | 
 |  | 
 | 			BUG_ON(!PageLocked(page)); | 
 | 			BUG_ON(PageWriteback(page)); | 
 |  | 
 | 			pages_skipped = mpd->wbc->pages_skipped; | 
 | 			err = mapping->a_ops->writepage(page, mpd->wbc); | 
 | 			if (!err && (pages_skipped == mpd->wbc->pages_skipped)) | 
 | 				/* | 
 | 				 * have successfully written the page | 
 | 				 * without skipping the same | 
 | 				 */ | 
 | 				mpd->pages_written++; | 
 | 			/* | 
 | 			 * In error case, we have to continue because | 
 | 			 * remaining pages are still locked | 
 | 			 * XXX: unlock and re-dirty them? | 
 | 			 */ | 
 | 			if (ret == 0) | 
 | 				ret = err; | 
 | 		} | 
 | 		pagevec_release(&pvec); | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * mpage_put_bnr_to_bhs - walk blocks and assign them actual numbers | 
 |  * | 
 |  * @mpd->inode - inode to walk through | 
 |  * @exbh->b_blocknr - first block on a disk | 
 |  * @exbh->b_size - amount of space in bytes | 
 |  * @logical - first logical block to start assignment with | 
 |  * | 
 |  * the function goes through all passed space and put actual disk | 
 |  * block numbers into buffer heads, dropping BH_Delay and BH_Unwritten | 
 |  */ | 
 | static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical, | 
 | 				 struct buffer_head *exbh) | 
 | { | 
 | 	struct inode *inode = mpd->inode; | 
 | 	struct address_space *mapping = inode->i_mapping; | 
 | 	int blocks = exbh->b_size >> inode->i_blkbits; | 
 | 	sector_t pblock = exbh->b_blocknr, cur_logical; | 
 | 	struct buffer_head *head, *bh; | 
 | 	pgoff_t index, end; | 
 | 	struct pagevec pvec; | 
 | 	int nr_pages, i; | 
 |  | 
 | 	index = logical >> (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
 | 	end = (logical + blocks - 1) >> (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
 | 	cur_logical = index << (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
 |  | 
 | 	pagevec_init(&pvec, 0); | 
 |  | 
 | 	while (index <= end) { | 
 | 		/* XXX: optimize tail */ | 
 | 		nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE); | 
 | 		if (nr_pages == 0) | 
 | 			break; | 
 | 		for (i = 0; i < nr_pages; i++) { | 
 | 			struct page *page = pvec.pages[i]; | 
 |  | 
 | 			index = page->index; | 
 | 			if (index > end) | 
 | 				break; | 
 | 			index++; | 
 |  | 
 | 			BUG_ON(!PageLocked(page)); | 
 | 			BUG_ON(PageWriteback(page)); | 
 | 			BUG_ON(!page_has_buffers(page)); | 
 |  | 
 | 			bh = page_buffers(page); | 
 | 			head = bh; | 
 |  | 
 | 			/* skip blocks out of the range */ | 
 | 			do { | 
 | 				if (cur_logical >= logical) | 
 | 					break; | 
 | 				cur_logical++; | 
 | 			} while ((bh = bh->b_this_page) != head); | 
 |  | 
 | 			do { | 
 | 				if (cur_logical >= logical + blocks) | 
 | 					break; | 
 |  | 
 | 				if (buffer_delay(bh) || | 
 | 						buffer_unwritten(bh)) { | 
 |  | 
 | 					BUG_ON(bh->b_bdev != inode->i_sb->s_bdev); | 
 |  | 
 | 					if (buffer_delay(bh)) { | 
 | 						clear_buffer_delay(bh); | 
 | 						bh->b_blocknr = pblock; | 
 | 					} else { | 
 | 						/* | 
 | 						 * unwritten already should have | 
 | 						 * blocknr assigned. Verify that | 
 | 						 */ | 
 | 						clear_buffer_unwritten(bh); | 
 | 						BUG_ON(bh->b_blocknr != pblock); | 
 | 					} | 
 |  | 
 | 				} else if (buffer_mapped(bh)) | 
 | 					BUG_ON(bh->b_blocknr != pblock); | 
 |  | 
 | 				cur_logical++; | 
 | 				pblock++; | 
 | 			} while ((bh = bh->b_this_page) != head); | 
 | 		} | 
 | 		pagevec_release(&pvec); | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * __unmap_underlying_blocks - just a helper function to unmap | 
 |  * set of blocks described by @bh | 
 |  */ | 
 | static inline void __unmap_underlying_blocks(struct inode *inode, | 
 | 					     struct buffer_head *bh) | 
 | { | 
 | 	struct block_device *bdev = inode->i_sb->s_bdev; | 
 | 	int blocks, i; | 
 |  | 
 | 	blocks = bh->b_size >> inode->i_blkbits; | 
 | 	for (i = 0; i < blocks; i++) | 
 | 		unmap_underlying_metadata(bdev, bh->b_blocknr + i); | 
 | } | 
 |  | 
 | static void ext4_da_block_invalidatepages(struct mpage_da_data *mpd, | 
 | 					sector_t logical, long blk_cnt) | 
 | { | 
 | 	int nr_pages, i; | 
 | 	pgoff_t index, end; | 
 | 	struct pagevec pvec; | 
 | 	struct inode *inode = mpd->inode; | 
 | 	struct address_space *mapping = inode->i_mapping; | 
 |  | 
 | 	index = logical >> (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
 | 	end   = (logical + blk_cnt - 1) >> | 
 | 				(PAGE_CACHE_SHIFT - inode->i_blkbits); | 
 | 	while (index <= end) { | 
 | 		nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE); | 
 | 		if (nr_pages == 0) | 
 | 			break; | 
 | 		for (i = 0; i < nr_pages; i++) { | 
 | 			struct page *page = pvec.pages[i]; | 
 | 			index = page->index; | 
 | 			if (index > end) | 
 | 				break; | 
 | 			index++; | 
 |  | 
 | 			BUG_ON(!PageLocked(page)); | 
 | 			BUG_ON(PageWriteback(page)); | 
 | 			block_invalidatepage(page, 0); | 
 | 			ClearPageUptodate(page); | 
 | 			unlock_page(page); | 
 | 		} | 
 | 	} | 
 | 	return; | 
 | } | 
 |  | 
 | static void ext4_print_free_blocks(struct inode *inode) | 
 | { | 
 | 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
 | 	printk(KERN_EMERG "Total free blocks count %lld\n", | 
 | 			ext4_count_free_blocks(inode->i_sb)); | 
 | 	printk(KERN_EMERG "Free/Dirty block details\n"); | 
 | 	printk(KERN_EMERG "free_blocks=%lld\n", | 
 | 			(long long)percpu_counter_sum(&sbi->s_freeblocks_counter)); | 
 | 	printk(KERN_EMERG "dirty_blocks=%lld\n", | 
 | 			(long long)percpu_counter_sum(&sbi->s_dirtyblocks_counter)); | 
 | 	printk(KERN_EMERG "Block reservation details\n"); | 
 | 	printk(KERN_EMERG "i_reserved_data_blocks=%u\n", | 
 | 			EXT4_I(inode)->i_reserved_data_blocks); | 
 | 	printk(KERN_EMERG "i_reserved_meta_blocks=%u\n", | 
 | 			EXT4_I(inode)->i_reserved_meta_blocks); | 
 | 	return; | 
 | } | 
 |  | 
 | /* | 
 |  * mpage_da_map_blocks - go through given space | 
 |  * | 
 |  * @mpd - bh describing space | 
 |  * | 
 |  * The function skips space we know is already mapped to disk blocks. | 
 |  * | 
 |  */ | 
 | static int mpage_da_map_blocks(struct mpage_da_data *mpd) | 
 | { | 
 | 	int err, blks, get_blocks_flags; | 
 | 	struct buffer_head new; | 
 | 	sector_t next = mpd->b_blocknr; | 
 | 	unsigned max_blocks = mpd->b_size >> mpd->inode->i_blkbits; | 
 | 	loff_t disksize = EXT4_I(mpd->inode)->i_disksize; | 
 | 	handle_t *handle = NULL; | 
 |  | 
 | 	/* | 
 | 	 * We consider only non-mapped and non-allocated blocks | 
 | 	 */ | 
 | 	if ((mpd->b_state  & (1 << BH_Mapped)) && | 
 | 		!(mpd->b_state & (1 << BH_Delay)) && | 
 | 		!(mpd->b_state & (1 << BH_Unwritten))) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * If we didn't accumulate anything to write simply return | 
 | 	 */ | 
 | 	if (!mpd->b_size) | 
 | 		return 0; | 
 |  | 
 | 	handle = ext4_journal_current_handle(); | 
 | 	BUG_ON(!handle); | 
 |  | 
 | 	/* | 
 | 	 * Call ext4_get_blocks() to allocate any delayed allocation | 
 | 	 * blocks, or to convert an uninitialized extent to be | 
 | 	 * initialized (in the case where we have written into | 
 | 	 * one or more preallocated blocks). | 
 | 	 * | 
 | 	 * We pass in the magic EXT4_GET_BLOCKS_DELALLOC_RESERVE to | 
 | 	 * indicate that we are on the delayed allocation path.  This | 
 | 	 * affects functions in many different parts of the allocation | 
 | 	 * call path.  This flag exists primarily because we don't | 
 | 	 * want to change *many* call functions, so ext4_get_blocks() | 
 | 	 * will set the magic i_delalloc_reserved_flag once the | 
 | 	 * inode's allocation semaphore is taken. | 
 | 	 * | 
 | 	 * If the blocks in questions were delalloc blocks, set | 
 | 	 * EXT4_GET_BLOCKS_DELALLOC_RESERVE so the delalloc accounting | 
 | 	 * variables are updated after the blocks have been allocated. | 
 | 	 */ | 
 | 	new.b_state = 0; | 
 | 	get_blocks_flags = (EXT4_GET_BLOCKS_CREATE | | 
 | 			    EXT4_GET_BLOCKS_DELALLOC_RESERVE); | 
 | 	if (mpd->b_state & (1 << BH_Delay)) | 
 | 		get_blocks_flags |= EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE; | 
 | 	blks = ext4_get_blocks(handle, mpd->inode, next, max_blocks, | 
 | 			       &new, get_blocks_flags); | 
 | 	if (blks < 0) { | 
 | 		err = blks; | 
 | 		/* | 
 | 		 * If get block returns with error we simply | 
 | 		 * return. Later writepage will redirty the page and | 
 | 		 * writepages will find the dirty page again | 
 | 		 */ | 
 | 		if (err == -EAGAIN) | 
 | 			return 0; | 
 |  | 
 | 		if (err == -ENOSPC && | 
 | 		    ext4_count_free_blocks(mpd->inode->i_sb)) { | 
 | 			mpd->retval = err; | 
 | 			return 0; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * get block failure will cause us to loop in | 
 | 		 * writepages, because a_ops->writepage won't be able | 
 | 		 * to make progress. The page will be redirtied by | 
 | 		 * writepage and writepages will again try to write | 
 | 		 * the same. | 
 | 		 */ | 
 | 		printk(KERN_EMERG "%s block allocation failed for inode %lu " | 
 | 				  "at logical offset %llu with max blocks " | 
 | 				  "%zd with error %d\n", | 
 | 				  __func__, mpd->inode->i_ino, | 
 | 				  (unsigned long long)next, | 
 | 				  mpd->b_size >> mpd->inode->i_blkbits, err); | 
 | 		printk(KERN_EMERG "This should not happen.!! " | 
 | 					"Data will be lost\n"); | 
 | 		if (err == -ENOSPC) { | 
 | 			ext4_print_free_blocks(mpd->inode); | 
 | 		} | 
 | 		/* invalidate all the pages */ | 
 | 		ext4_da_block_invalidatepages(mpd, next, | 
 | 				mpd->b_size >> mpd->inode->i_blkbits); | 
 | 		return err; | 
 | 	} | 
 | 	BUG_ON(blks == 0); | 
 |  | 
 | 	new.b_size = (blks << mpd->inode->i_blkbits); | 
 |  | 
 | 	if (buffer_new(&new)) | 
 | 		__unmap_underlying_blocks(mpd->inode, &new); | 
 |  | 
 | 	/* | 
 | 	 * If blocks are delayed marked, we need to | 
 | 	 * put actual blocknr and drop delayed bit | 
 | 	 */ | 
 | 	if ((mpd->b_state & (1 << BH_Delay)) || | 
 | 	    (mpd->b_state & (1 << BH_Unwritten))) | 
 | 		mpage_put_bnr_to_bhs(mpd, next, &new); | 
 |  | 
 | 	if (ext4_should_order_data(mpd->inode)) { | 
 | 		err = ext4_jbd2_file_inode(handle, mpd->inode); | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Update on-disk size along with block allocation. | 
 | 	 */ | 
 | 	disksize = ((loff_t) next + blks) << mpd->inode->i_blkbits; | 
 | 	if (disksize > i_size_read(mpd->inode)) | 
 | 		disksize = i_size_read(mpd->inode); | 
 | 	if (disksize > EXT4_I(mpd->inode)->i_disksize) { | 
 | 		ext4_update_i_disksize(mpd->inode, disksize); | 
 | 		return ext4_mark_inode_dirty(handle, mpd->inode); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | \ | 
 | 		(1 << BH_Delay) | (1 << BH_Unwritten)) | 
 |  | 
 | /* | 
 |  * mpage_add_bh_to_extent - try to add one more block to extent of blocks | 
 |  * | 
 |  * @mpd->lbh - extent of blocks | 
 |  * @logical - logical number of the block in the file | 
 |  * @bh - bh of the block (used to access block's state) | 
 |  * | 
 |  * the function is used to collect contig. blocks in same state | 
 |  */ | 
 | static void mpage_add_bh_to_extent(struct mpage_da_data *mpd, | 
 | 				   sector_t logical, size_t b_size, | 
 | 				   unsigned long b_state) | 
 | { | 
 | 	sector_t next; | 
 | 	int nrblocks = mpd->b_size >> mpd->inode->i_blkbits; | 
 |  | 
 | 	/* check if thereserved journal credits might overflow */ | 
 | 	if (!(EXT4_I(mpd->inode)->i_flags & EXT4_EXTENTS_FL)) { | 
 | 		if (nrblocks >= EXT4_MAX_TRANS_DATA) { | 
 | 			/* | 
 | 			 * With non-extent format we are limited by the journal | 
 | 			 * credit available.  Total credit needed to insert | 
 | 			 * nrblocks contiguous blocks is dependent on the | 
 | 			 * nrblocks.  So limit nrblocks. | 
 | 			 */ | 
 | 			goto flush_it; | 
 | 		} else if ((nrblocks + (b_size >> mpd->inode->i_blkbits)) > | 
 | 				EXT4_MAX_TRANS_DATA) { | 
 | 			/* | 
 | 			 * Adding the new buffer_head would make it cross the | 
 | 			 * allowed limit for which we have journal credit | 
 | 			 * reserved. So limit the new bh->b_size | 
 | 			 */ | 
 | 			b_size = (EXT4_MAX_TRANS_DATA - nrblocks) << | 
 | 						mpd->inode->i_blkbits; | 
 | 			/* we will do mpage_da_submit_io in the next loop */ | 
 | 		} | 
 | 	} | 
 | 	/* | 
 | 	 * First block in the extent | 
 | 	 */ | 
 | 	if (mpd->b_size == 0) { | 
 | 		mpd->b_blocknr = logical; | 
 | 		mpd->b_size = b_size; | 
 | 		mpd->b_state = b_state & BH_FLAGS; | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	next = mpd->b_blocknr + nrblocks; | 
 | 	/* | 
 | 	 * Can we merge the block to our big extent? | 
 | 	 */ | 
 | 	if (logical == next && (b_state & BH_FLAGS) == mpd->b_state) { | 
 | 		mpd->b_size += b_size; | 
 | 		return; | 
 | 	} | 
 |  | 
 | flush_it: | 
 | 	/* | 
 | 	 * We couldn't merge the block to our extent, so we | 
 | 	 * need to flush current  extent and start new one | 
 | 	 */ | 
 | 	if (mpage_da_map_blocks(mpd) == 0) | 
 | 		mpage_da_submit_io(mpd); | 
 | 	mpd->io_done = 1; | 
 | 	return; | 
 | } | 
 |  | 
 | static int ext4_bh_delay_or_unwritten(handle_t *handle, struct buffer_head *bh) | 
 | { | 
 | 	return (buffer_delay(bh) || buffer_unwritten(bh)) && buffer_dirty(bh); | 
 | } | 
 |  | 
 | /* | 
 |  * __mpage_da_writepage - finds extent of pages and blocks | 
 |  * | 
 |  * @page: page to consider | 
 |  * @wbc: not used, we just follow rules | 
 |  * @data: context | 
 |  * | 
 |  * The function finds extents of pages and scan them for all blocks. | 
 |  */ | 
 | static int __mpage_da_writepage(struct page *page, | 
 | 				struct writeback_control *wbc, void *data) | 
 | { | 
 | 	struct mpage_da_data *mpd = data; | 
 | 	struct inode *inode = mpd->inode; | 
 | 	struct buffer_head *bh, *head; | 
 | 	sector_t logical; | 
 |  | 
 | 	if (mpd->io_done) { | 
 | 		/* | 
 | 		 * Rest of the page in the page_vec | 
 | 		 * redirty then and skip then. We will | 
 | 		 * try to to write them again after | 
 | 		 * starting a new transaction | 
 | 		 */ | 
 | 		redirty_page_for_writepage(wbc, page); | 
 | 		unlock_page(page); | 
 | 		return MPAGE_DA_EXTENT_TAIL; | 
 | 	} | 
 | 	/* | 
 | 	 * Can we merge this page to current extent? | 
 | 	 */ | 
 | 	if (mpd->next_page != page->index) { | 
 | 		/* | 
 | 		 * Nope, we can't. So, we map non-allocated blocks | 
 | 		 * and start IO on them using writepage() | 
 | 		 */ | 
 | 		if (mpd->next_page != mpd->first_page) { | 
 | 			if (mpage_da_map_blocks(mpd) == 0) | 
 | 				mpage_da_submit_io(mpd); | 
 | 			/* | 
 | 			 * skip rest of the page in the page_vec | 
 | 			 */ | 
 | 			mpd->io_done = 1; | 
 | 			redirty_page_for_writepage(wbc, page); | 
 | 			unlock_page(page); | 
 | 			return MPAGE_DA_EXTENT_TAIL; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Start next extent of pages ... | 
 | 		 */ | 
 | 		mpd->first_page = page->index; | 
 |  | 
 | 		/* | 
 | 		 * ... and blocks | 
 | 		 */ | 
 | 		mpd->b_size = 0; | 
 | 		mpd->b_state = 0; | 
 | 		mpd->b_blocknr = 0; | 
 | 	} | 
 |  | 
 | 	mpd->next_page = page->index + 1; | 
 | 	logical = (sector_t) page->index << | 
 | 		  (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
 |  | 
 | 	if (!page_has_buffers(page)) { | 
 | 		mpage_add_bh_to_extent(mpd, logical, PAGE_CACHE_SIZE, | 
 | 				       (1 << BH_Dirty) | (1 << BH_Uptodate)); | 
 | 		if (mpd->io_done) | 
 | 			return MPAGE_DA_EXTENT_TAIL; | 
 | 	} else { | 
 | 		/* | 
 | 		 * Page with regular buffer heads, just add all dirty ones | 
 | 		 */ | 
 | 		head = page_buffers(page); | 
 | 		bh = head; | 
 | 		do { | 
 | 			BUG_ON(buffer_locked(bh)); | 
 | 			/* | 
 | 			 * We need to try to allocate | 
 | 			 * unmapped blocks in the same page. | 
 | 			 * Otherwise we won't make progress | 
 | 			 * with the page in ext4_writepage | 
 | 			 */ | 
 | 			if (ext4_bh_delay_or_unwritten(NULL, bh)) { | 
 | 				mpage_add_bh_to_extent(mpd, logical, | 
 | 						       bh->b_size, | 
 | 						       bh->b_state); | 
 | 				if (mpd->io_done) | 
 | 					return MPAGE_DA_EXTENT_TAIL; | 
 | 			} else if (buffer_dirty(bh) && (buffer_mapped(bh))) { | 
 | 				/* | 
 | 				 * mapped dirty buffer. We need to update | 
 | 				 * the b_state because we look at | 
 | 				 * b_state in mpage_da_map_blocks. We don't | 
 | 				 * update b_size because if we find an | 
 | 				 * unmapped buffer_head later we need to | 
 | 				 * use the b_state flag of that buffer_head. | 
 | 				 */ | 
 | 				if (mpd->b_size == 0) | 
 | 					mpd->b_state = bh->b_state & BH_FLAGS; | 
 | 			} | 
 | 			logical++; | 
 | 		} while ((bh = bh->b_this_page) != head); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * This is a special get_blocks_t callback which is used by | 
 |  * ext4_da_write_begin().  It will either return mapped block or | 
 |  * reserve space for a single block. | 
 |  * | 
 |  * For delayed buffer_head we have BH_Mapped, BH_New, BH_Delay set. | 
 |  * We also have b_blocknr = -1 and b_bdev initialized properly | 
 |  * | 
 |  * For unwritten buffer_head we have BH_Mapped, BH_New, BH_Unwritten set. | 
 |  * We also have b_blocknr = physicalblock mapping unwritten extent and b_bdev | 
 |  * initialized properly. | 
 |  */ | 
 | static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock, | 
 | 				  struct buffer_head *bh_result, int create) | 
 | { | 
 | 	int ret = 0; | 
 | 	sector_t invalid_block = ~((sector_t) 0xffff); | 
 |  | 
 | 	if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es)) | 
 | 		invalid_block = ~0; | 
 |  | 
 | 	BUG_ON(create == 0); | 
 | 	BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize); | 
 |  | 
 | 	/* | 
 | 	 * first, we need to know whether the block is allocated already | 
 | 	 * preallocated blocks are unmapped but should treated | 
 | 	 * the same as allocated blocks. | 
 | 	 */ | 
 | 	ret = ext4_get_blocks(NULL, inode, iblock, 1,  bh_result, 0); | 
 | 	if ((ret == 0) && !buffer_delay(bh_result)) { | 
 | 		/* the block isn't (pre)allocated yet, let's reserve space */ | 
 | 		/* | 
 | 		 * XXX: __block_prepare_write() unmaps passed block, | 
 | 		 * is it OK? | 
 | 		 */ | 
 | 		ret = ext4_da_reserve_space(inode, 1); | 
 | 		if (ret) | 
 | 			/* not enough space to reserve */ | 
 | 			return ret; | 
 |  | 
 | 		map_bh(bh_result, inode->i_sb, invalid_block); | 
 | 		set_buffer_new(bh_result); | 
 | 		set_buffer_delay(bh_result); | 
 | 	} else if (ret > 0) { | 
 | 		bh_result->b_size = (ret << inode->i_blkbits); | 
 | 		if (buffer_unwritten(bh_result)) { | 
 | 			/* A delayed write to unwritten bh should | 
 | 			 * be marked new and mapped.  Mapped ensures | 
 | 			 * that we don't do get_block multiple times | 
 | 			 * when we write to the same offset and new | 
 | 			 * ensures that we do proper zero out for | 
 | 			 * partial write. | 
 | 			 */ | 
 | 			set_buffer_new(bh_result); | 
 | 			set_buffer_mapped(bh_result); | 
 | 		} | 
 | 		ret = 0; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * This function is used as a standard get_block_t calback function | 
 |  * when there is no desire to allocate any blocks.  It is used as a | 
 |  * callback function for block_prepare_write(), nobh_writepage(), and | 
 |  * block_write_full_page().  These functions should only try to map a | 
 |  * single block at a time. | 
 |  * | 
 |  * Since this function doesn't do block allocations even if the caller | 
 |  * requests it by passing in create=1, it is critically important that | 
 |  * any caller checks to make sure that any buffer heads are returned | 
 |  * by this function are either all already mapped or marked for | 
 |  * delayed allocation before calling nobh_writepage() or | 
 |  * block_write_full_page().  Otherwise, b_blocknr could be left | 
 |  * unitialized, and the page write functions will be taken by | 
 |  * surprise. | 
 |  */ | 
 | static int noalloc_get_block_write(struct inode *inode, sector_t iblock, | 
 | 				   struct buffer_head *bh_result, int create) | 
 | { | 
 | 	int ret = 0; | 
 | 	unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; | 
 |  | 
 | 	BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize); | 
 |  | 
 | 	/* | 
 | 	 * we don't want to do block allocation in writepage | 
 | 	 * so call get_block_wrap with create = 0 | 
 | 	 */ | 
 | 	ret = ext4_get_blocks(NULL, inode, iblock, max_blocks, bh_result, 0); | 
 | 	if (ret > 0) { | 
 | 		bh_result->b_size = (ret << inode->i_blkbits); | 
 | 		ret = 0; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int bget_one(handle_t *handle, struct buffer_head *bh) | 
 | { | 
 | 	get_bh(bh); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int bput_one(handle_t *handle, struct buffer_head *bh) | 
 | { | 
 | 	put_bh(bh); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __ext4_journalled_writepage(struct page *page, | 
 | 				       struct writeback_control *wbc, | 
 | 				       unsigned int len) | 
 | { | 
 | 	struct address_space *mapping = page->mapping; | 
 | 	struct inode *inode = mapping->host; | 
 | 	struct buffer_head *page_bufs; | 
 | 	handle_t *handle = NULL; | 
 | 	int ret = 0; | 
 | 	int err; | 
 |  | 
 | 	page_bufs = page_buffers(page); | 
 | 	BUG_ON(!page_bufs); | 
 | 	walk_page_buffers(handle, page_bufs, 0, len, NULL, bget_one); | 
 | 	/* As soon as we unlock the page, it can go away, but we have | 
 | 	 * references to buffers so we are safe */ | 
 | 	unlock_page(page); | 
 |  | 
 | 	handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode)); | 
 | 	if (IS_ERR(handle)) { | 
 | 		ret = PTR_ERR(handle); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	ret = walk_page_buffers(handle, page_bufs, 0, len, NULL, | 
 | 				do_journal_get_write_access); | 
 |  | 
 | 	err = walk_page_buffers(handle, page_bufs, 0, len, NULL, | 
 | 				write_end_fn); | 
 | 	if (ret == 0) | 
 | 		ret = err; | 
 | 	err = ext4_journal_stop(handle); | 
 | 	if (!ret) | 
 | 		ret = err; | 
 |  | 
 | 	walk_page_buffers(handle, page_bufs, 0, len, NULL, bput_one); | 
 | 	EXT4_I(inode)->i_state |= EXT4_STATE_JDATA; | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Note that we don't need to start a transaction unless we're journaling data | 
 |  * because we should have holes filled from ext4_page_mkwrite(). We even don't | 
 |  * need to file the inode to the transaction's list in ordered mode because if | 
 |  * we are writing back data added by write(), the inode is already there and if | 
 |  * we are writing back data modified via mmap(), noone guarantees in which | 
 |  * transaction the data will hit the disk. In case we are journaling data, we | 
 |  * cannot start transaction directly because transaction start ranks above page | 
 |  * lock so we have to do some magic. | 
 |  * | 
 |  * This function can get called via... | 
 |  *   - ext4_da_writepages after taking page lock (have journal handle) | 
 |  *   - journal_submit_inode_data_buffers (no journal handle) | 
 |  *   - shrink_page_list via pdflush (no journal handle) | 
 |  *   - grab_page_cache when doing write_begin (have journal handle) | 
 |  * | 
 |  * We don't do any block allocation in this function. If we have page with | 
 |  * multiple blocks we need to write those buffer_heads that are mapped. This | 
 |  * is important for mmaped based write. So if we do with blocksize 1K | 
 |  * truncate(f, 1024); | 
 |  * a = mmap(f, 0, 4096); | 
 |  * a[0] = 'a'; | 
 |  * truncate(f, 4096); | 
 |  * we have in the page first buffer_head mapped via page_mkwrite call back | 
 |  * but other bufer_heads would be unmapped but dirty(dirty done via the | 
 |  * do_wp_page). So writepage should write the first block. If we modify | 
 |  * the mmap area beyond 1024 we will again get a page_fault and the | 
 |  * page_mkwrite callback will do the block allocation and mark the | 
 |  * buffer_heads mapped. | 
 |  * | 
 |  * We redirty the page if we have any buffer_heads that is either delay or | 
 |  * unwritten in the page. | 
 |  * | 
 |  * We can get recursively called as show below. | 
 |  * | 
 |  *	ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() -> | 
 |  *		ext4_writepage() | 
 |  * | 
 |  * But since we don't do any block allocation we should not deadlock. | 
 |  * Page also have the dirty flag cleared so we don't get recurive page_lock. | 
 |  */ | 
 | static int ext4_writepage(struct page *page, | 
 | 			  struct writeback_control *wbc) | 
 | { | 
 | 	int ret = 0; | 
 | 	loff_t size; | 
 | 	unsigned int len; | 
 | 	struct buffer_head *page_bufs; | 
 | 	struct inode *inode = page->mapping->host; | 
 |  | 
 | 	trace_ext4_writepage(inode, page); | 
 | 	size = i_size_read(inode); | 
 | 	if (page->index == size >> PAGE_CACHE_SHIFT) | 
 | 		len = size & ~PAGE_CACHE_MASK; | 
 | 	else | 
 | 		len = PAGE_CACHE_SIZE; | 
 |  | 
 | 	if (page_has_buffers(page)) { | 
 | 		page_bufs = page_buffers(page); | 
 | 		if (walk_page_buffers(NULL, page_bufs, 0, len, NULL, | 
 | 					ext4_bh_delay_or_unwritten)) { | 
 | 			/* | 
 | 			 * We don't want to do  block allocation | 
 | 			 * So redirty the page and return | 
 | 			 * We may reach here when we do a journal commit | 
 | 			 * via journal_submit_inode_data_buffers. | 
 | 			 * If we don't have mapping block we just ignore | 
 | 			 * them. We can also reach here via shrink_page_list | 
 | 			 */ | 
 | 			redirty_page_for_writepage(wbc, page); | 
 | 			unlock_page(page); | 
 | 			return 0; | 
 | 		} | 
 | 	} else { | 
 | 		/* | 
 | 		 * The test for page_has_buffers() is subtle: | 
 | 		 * We know the page is dirty but it lost buffers. That means | 
 | 		 * that at some moment in time after write_begin()/write_end() | 
 | 		 * has been called all buffers have been clean and thus they | 
 | 		 * must have been written at least once. So they are all | 
 | 		 * mapped and we can happily proceed with mapping them | 
 | 		 * and writing the page. | 
 | 		 * | 
 | 		 * Try to initialize the buffer_heads and check whether | 
 | 		 * all are mapped and non delay. We don't want to | 
 | 		 * do block allocation here. | 
 | 		 */ | 
 | 		ret = block_prepare_write(page, 0, len, | 
 | 					  noalloc_get_block_write); | 
 | 		if (!ret) { | 
 | 			page_bufs = page_buffers(page); | 
 | 			/* check whether all are mapped and non delay */ | 
 | 			if (walk_page_buffers(NULL, page_bufs, 0, len, NULL, | 
 | 						ext4_bh_delay_or_unwritten)) { | 
 | 				redirty_page_for_writepage(wbc, page); | 
 | 				unlock_page(page); | 
 | 				return 0; | 
 | 			} | 
 | 		} else { | 
 | 			/* | 
 | 			 * We can't do block allocation here | 
 | 			 * so just redity the page and unlock | 
 | 			 * and return | 
 | 			 */ | 
 | 			redirty_page_for_writepage(wbc, page); | 
 | 			unlock_page(page); | 
 | 			return 0; | 
 | 		} | 
 | 		/* now mark the buffer_heads as dirty and uptodate */ | 
 | 		block_commit_write(page, 0, len); | 
 | 	} | 
 |  | 
 | 	if (PageChecked(page) && ext4_should_journal_data(inode)) { | 
 | 		/* | 
 | 		 * It's mmapped pagecache.  Add buffers and journal it.  There | 
 | 		 * doesn't seem much point in redirtying the page here. | 
 | 		 */ | 
 | 		ClearPageChecked(page); | 
 | 		return __ext4_journalled_writepage(page, wbc, len); | 
 | 	} | 
 |  | 
 | 	if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode)) | 
 | 		ret = nobh_writepage(page, noalloc_get_block_write, wbc); | 
 | 	else | 
 | 		ret = block_write_full_page(page, noalloc_get_block_write, | 
 | 					    wbc); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * This is called via ext4_da_writepages() to | 
 |  * calulate the total number of credits to reserve to fit | 
 |  * a single extent allocation into a single transaction, | 
 |  * ext4_da_writpeages() will loop calling this before | 
 |  * the block allocation. | 
 |  */ | 
 |  | 
 | static int ext4_da_writepages_trans_blocks(struct inode *inode) | 
 | { | 
 | 	int max_blocks = EXT4_I(inode)->i_reserved_data_blocks; | 
 |  | 
 | 	/* | 
 | 	 * With non-extent format the journal credit needed to | 
 | 	 * insert nrblocks contiguous block is dependent on | 
 | 	 * number of contiguous block. So we will limit | 
 | 	 * number of contiguous block to a sane value | 
 | 	 */ | 
 | 	if (!(inode->i_flags & EXT4_EXTENTS_FL) && | 
 | 	    (max_blocks > EXT4_MAX_TRANS_DATA)) | 
 | 		max_blocks = EXT4_MAX_TRANS_DATA; | 
 |  | 
 | 	return ext4_chunk_trans_blocks(inode, max_blocks); | 
 | } | 
 |  | 
 | static int ext4_da_writepages(struct address_space *mapping, | 
 | 			      struct writeback_control *wbc) | 
 | { | 
 | 	pgoff_t	index; | 
 | 	int range_whole = 0; | 
 | 	handle_t *handle = NULL; | 
 | 	struct mpage_da_data mpd; | 
 | 	struct inode *inode = mapping->host; | 
 | 	int no_nrwrite_index_update; | 
 | 	int pages_written = 0; | 
 | 	long pages_skipped; | 
 | 	int range_cyclic, cycled = 1, io_done = 0; | 
 | 	int needed_blocks, ret = 0, nr_to_writebump = 0; | 
 | 	struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb); | 
 |  | 
 | 	trace_ext4_da_writepages(inode, wbc); | 
 |  | 
 | 	/* | 
 | 	 * No pages to write? This is mainly a kludge to avoid starting | 
 | 	 * a transaction for special inodes like journal inode on last iput() | 
 | 	 * because that could violate lock ordering on umount | 
 | 	 */ | 
 | 	if (!mapping->nrpages || !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * If the filesystem has aborted, it is read-only, so return | 
 | 	 * right away instead of dumping stack traces later on that | 
 | 	 * will obscure the real source of the problem.  We test | 
 | 	 * EXT4_MF_FS_ABORTED instead of sb->s_flag's MS_RDONLY because | 
 | 	 * the latter could be true if the filesystem is mounted | 
 | 	 * read-only, and in that case, ext4_da_writepages should | 
 | 	 * *never* be called, so if that ever happens, we would want | 
 | 	 * the stack trace. | 
 | 	 */ | 
 | 	if (unlikely(sbi->s_mount_flags & EXT4_MF_FS_ABORTED)) | 
 | 		return -EROFS; | 
 |  | 
 | 	/* | 
 | 	 * Make sure nr_to_write is >= sbi->s_mb_stream_request | 
 | 	 * This make sure small files blocks are allocated in | 
 | 	 * single attempt. This ensure that small files | 
 | 	 * get less fragmented. | 
 | 	 */ | 
 | 	if (wbc->nr_to_write < sbi->s_mb_stream_request) { | 
 | 		nr_to_writebump = sbi->s_mb_stream_request - wbc->nr_to_write; | 
 | 		wbc->nr_to_write = sbi->s_mb_stream_request; | 
 | 	} | 
 | 	if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX) | 
 | 		range_whole = 1; | 
 |  | 
 | 	range_cyclic = wbc->range_cyclic; | 
 | 	if (wbc->range_cyclic) { | 
 | 		index = mapping->writeback_index; | 
 | 		if (index) | 
 | 			cycled = 0; | 
 | 		wbc->range_start = index << PAGE_CACHE_SHIFT; | 
 | 		wbc->range_end  = LLONG_MAX; | 
 | 		wbc->range_cyclic = 0; | 
 | 	} else | 
 | 		index = wbc->range_start >> PAGE_CACHE_SHIFT; | 
 |  | 
 | 	mpd.wbc = wbc; | 
 | 	mpd.inode = mapping->host; | 
 |  | 
 | 	/* | 
 | 	 * we don't want write_cache_pages to update | 
 | 	 * nr_to_write and writeback_index | 
 | 	 */ | 
 | 	no_nrwrite_index_update = wbc->no_nrwrite_index_update; | 
 | 	wbc->no_nrwrite_index_update = 1; | 
 | 	pages_skipped = wbc->pages_skipped; | 
 |  | 
 | retry: | 
 | 	while (!ret && wbc->nr_to_write > 0) { | 
 |  | 
 | 		/* | 
 | 		 * we  insert one extent at a time. So we need | 
 | 		 * credit needed for single extent allocation. | 
 | 		 * journalled mode is currently not supported | 
 | 		 * by delalloc | 
 | 		 */ | 
 | 		BUG_ON(ext4_should_journal_data(inode)); | 
 | 		needed_blocks = ext4_da_writepages_trans_blocks(inode); | 
 |  | 
 | 		/* start a new transaction*/ | 
 | 		handle = ext4_journal_start(inode, needed_blocks); | 
 | 		if (IS_ERR(handle)) { | 
 | 			ret = PTR_ERR(handle); | 
 | 			printk(KERN_CRIT "%s: jbd2_start: " | 
 | 			       "%ld pages, ino %lu; err %d\n", __func__, | 
 | 				wbc->nr_to_write, inode->i_ino, ret); | 
 | 			dump_stack(); | 
 | 			goto out_writepages; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Now call __mpage_da_writepage to find the next | 
 | 		 * contiguous region of logical blocks that need | 
 | 		 * blocks to be allocated by ext4.  We don't actually | 
 | 		 * submit the blocks for I/O here, even though | 
 | 		 * write_cache_pages thinks it will, and will set the | 
 | 		 * pages as clean for write before calling | 
 | 		 * __mpage_da_writepage(). | 
 | 		 */ | 
 | 		mpd.b_size = 0; | 
 | 		mpd.b_state = 0; | 
 | 		mpd.b_blocknr = 0; | 
 | 		mpd.first_page = 0; | 
 | 		mpd.next_page = 0; | 
 | 		mpd.io_done = 0; | 
 | 		mpd.pages_written = 0; | 
 | 		mpd.retval = 0; | 
 | 		ret = write_cache_pages(mapping, wbc, __mpage_da_writepage, | 
 | 					&mpd); | 
 | 		/* | 
 | 		 * If we have a contigous extent of pages and we | 
 | 		 * haven't done the I/O yet, map the blocks and submit | 
 | 		 * them for I/O. | 
 | 		 */ | 
 | 		if (!mpd.io_done && mpd.next_page != mpd.first_page) { | 
 | 			if (mpage_da_map_blocks(&mpd) == 0) | 
 | 				mpage_da_submit_io(&mpd); | 
 | 			mpd.io_done = 1; | 
 | 			ret = MPAGE_DA_EXTENT_TAIL; | 
 | 		} | 
 | 		wbc->nr_to_write -= mpd.pages_written; | 
 |  | 
 | 		ext4_journal_stop(handle); | 
 |  | 
 | 		if ((mpd.retval == -ENOSPC) && sbi->s_journal) { | 
 | 			/* commit the transaction which would | 
 | 			 * free blocks released in the transaction | 
 | 			 * and try again | 
 | 			 */ | 
 | 			jbd2_journal_force_commit_nested(sbi->s_journal); | 
 | 			wbc->pages_skipped = pages_skipped; | 
 | 			ret = 0; | 
 | 		} else if (ret == MPAGE_DA_EXTENT_TAIL) { | 
 | 			/* | 
 | 			 * got one extent now try with | 
 | 			 * rest of the pages | 
 | 			 */ | 
 | 			pages_written += mpd.pages_written; | 
 | 			wbc->pages_skipped = pages_skipped; | 
 | 			ret = 0; | 
 | 			io_done = 1; | 
 | 		} else if (wbc->nr_to_write) | 
 | 			/* | 
 | 			 * There is no more writeout needed | 
 | 			 * or we requested for a noblocking writeout | 
 | 			 * and we found the device congested | 
 | 			 */ | 
 | 			break; | 
 | 	} | 
 | 	if (!io_done && !cycled) { | 
 | 		cycled = 1; | 
 | 		index = 0; | 
 | 		wbc->range_start = index << PAGE_CACHE_SHIFT; | 
 | 		wbc->range_end  = mapping->writeback_index - 1; | 
 | 		goto retry; | 
 | 	} | 
 | 	if (pages_skipped != wbc->pages_skipped) | 
 | 		printk(KERN_EMERG "This should not happen leaving %s " | 
 | 				"with nr_to_write = %ld ret = %d\n", | 
 | 				__func__, wbc->nr_to_write, ret); | 
 |  | 
 | 	/* Update index */ | 
 | 	index += pages_written; | 
 | 	wbc->range_cyclic = range_cyclic; | 
 | 	if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0)) | 
 | 		/* | 
 | 		 * set the writeback_index so that range_cyclic | 
 | 		 * mode will write it back later | 
 | 		 */ | 
 | 		mapping->writeback_index = index; | 
 |  | 
 | out_writepages: | 
 | 	if (!no_nrwrite_index_update) | 
 | 		wbc->no_nrwrite_index_update = 0; | 
 | 	wbc->nr_to_write -= nr_to_writebump; | 
 | 	trace_ext4_da_writepages_result(inode, wbc, ret, pages_written); | 
 | 	return ret; | 
 | } | 
 |  | 
 | #define FALL_BACK_TO_NONDELALLOC 1 | 
 | static int ext4_nonda_switch(struct super_block *sb) | 
 | { | 
 | 	s64 free_blocks, dirty_blocks; | 
 | 	struct ext4_sb_info *sbi = EXT4_SB(sb); | 
 |  | 
 | 	/* | 
 | 	 * switch to non delalloc mode if we are running low | 
 | 	 * on free block. The free block accounting via percpu | 
 | 	 * counters can get slightly wrong with percpu_counter_batch getting | 
 | 	 * accumulated on each CPU without updating global counters | 
 | 	 * Delalloc need an accurate free block accounting. So switch | 
 | 	 * to non delalloc when we are near to error range. | 
 | 	 */ | 
 | 	free_blocks  = percpu_counter_read_positive(&sbi->s_freeblocks_counter); | 
 | 	dirty_blocks = percpu_counter_read_positive(&sbi->s_dirtyblocks_counter); | 
 | 	if (2 * free_blocks < 3 * dirty_blocks || | 
 | 		free_blocks < (dirty_blocks + EXT4_FREEBLOCKS_WATERMARK)) { | 
 | 		/* | 
 | 		 * free block count is less that 150% of dirty blocks | 
 | 		 * or free blocks is less that watermark | 
 | 		 */ | 
 | 		return 1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ext4_da_write_begin(struct file *file, struct address_space *mapping, | 
 | 			       loff_t pos, unsigned len, unsigned flags, | 
 | 			       struct page **pagep, void **fsdata) | 
 | { | 
 | 	int ret, retries = 0; | 
 | 	struct page *page; | 
 | 	pgoff_t index; | 
 | 	unsigned from, to; | 
 | 	struct inode *inode = mapping->host; | 
 | 	handle_t *handle; | 
 |  | 
 | 	index = pos >> PAGE_CACHE_SHIFT; | 
 | 	from = pos & (PAGE_CACHE_SIZE - 1); | 
 | 	to = from + len; | 
 |  | 
 | 	if (ext4_nonda_switch(inode->i_sb)) { | 
 | 		*fsdata = (void *)FALL_BACK_TO_NONDELALLOC; | 
 | 		return ext4_write_begin(file, mapping, pos, | 
 | 					len, flags, pagep, fsdata); | 
 | 	} | 
 | 	*fsdata = (void *)0; | 
 | 	trace_ext4_da_write_begin(inode, pos, len, flags); | 
 | retry: | 
 | 	/* | 
 | 	 * With delayed allocation, we don't log the i_disksize update | 
 | 	 * if there is delayed block allocation. But we still need | 
 | 	 * to journalling the i_disksize update if writes to the end | 
 | 	 * of file which has an already mapped buffer. | 
 | 	 */ | 
 | 	handle = ext4_journal_start(inode, 1); | 
 | 	if (IS_ERR(handle)) { | 
 | 		ret = PTR_ERR(handle); | 
 | 		goto out; | 
 | 	} | 
 | 	/* We cannot recurse into the filesystem as the transaction is already | 
 | 	 * started */ | 
 | 	flags |= AOP_FLAG_NOFS; | 
 |  | 
 | 	page = grab_cache_page_write_begin(mapping, index, flags); | 
 | 	if (!page) { | 
 | 		ext4_journal_stop(handle); | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 | 	*pagep = page; | 
 |  | 
 | 	ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata, | 
 | 				ext4_da_get_block_prep); | 
 | 	if (ret < 0) { | 
 | 		unlock_page(page); | 
 | 		ext4_journal_stop(handle); | 
 | 		page_cache_release(page); | 
 | 		/* | 
 | 		 * block_write_begin may have instantiated a few blocks | 
 | 		 * outside i_size.  Trim these off again. Don't need | 
 | 		 * i_size_read because we hold i_mutex. | 
 | 		 */ | 
 | 		if (pos + len > inode->i_size) | 
 | 			ext4_truncate(inode); | 
 | 	} | 
 |  | 
 | 	if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) | 
 | 		goto retry; | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Check if we should update i_disksize | 
 |  * when write to the end of file but not require block allocation | 
 |  */ | 
 | static int ext4_da_should_update_i_disksize(struct page *page, | 
 | 					    unsigned long offset) | 
 | { | 
 | 	struct buffer_head *bh; | 
 | 	struct inode *inode = page->mapping->host; | 
 | 	unsigned int idx; | 
 | 	int i; | 
 |  | 
 | 	bh = page_buffers(page); | 
 | 	idx = offset >> inode->i_blkbits; | 
 |  | 
 | 	for (i = 0; i < idx; i++) | 
 | 		bh = bh->b_this_page; | 
 |  | 
 | 	if (!buffer_mapped(bh) || (buffer_delay(bh)) || buffer_unwritten(bh)) | 
 | 		return 0; | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int ext4_da_write_end(struct file *file, | 
 | 			     struct address_space *mapping, | 
 | 			     loff_t pos, unsigned len, unsigned copied, | 
 | 			     struct page *page, void *fsdata) | 
 | { | 
 | 	struct inode *inode = mapping->host; | 
 | 	int ret = 0, ret2; | 
 | 	handle_t *handle = ext4_journal_current_handle(); | 
 | 	loff_t new_i_size; | 
 | 	unsigned long start, end; | 
 | 	int write_mode = (int)(unsigned long)fsdata; | 
 |  | 
 | 	if (write_mode == FALL_BACK_TO_NONDELALLOC) { | 
 | 		if (ext4_should_order_data(inode)) { | 
 | 			return ext4_ordered_write_end(file, mapping, pos, | 
 | 					len, copied, page, fsdata); | 
 | 		} else if (ext4_should_writeback_data(inode)) { | 
 | 			return ext4_writeback_write_end(file, mapping, pos, | 
 | 					len, copied, page, fsdata); | 
 | 		} else { | 
 | 			BUG(); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	trace_ext4_da_write_end(inode, pos, len, copied); | 
 | 	start = pos & (PAGE_CACHE_SIZE - 1); | 
 | 	end = start + copied - 1; | 
 |  | 
 | 	/* | 
 | 	 * generic_write_end() will run mark_inode_dirty() if i_size | 
 | 	 * changes.  So let's piggyback the i_disksize mark_inode_dirty | 
 | 	 * into that. | 
 | 	 */ | 
 |  | 
 | 	new_i_size = pos + copied; | 
 | 	if (new_i_size > EXT4_I(inode)->i_disksize) { | 
 | 		if (ext4_da_should_update_i_disksize(page, end)) { | 
 | 			down_write(&EXT4_I(inode)->i_data_sem); | 
 | 			if (new_i_size > EXT4_I(inode)->i_disksize) { | 
 | 				/* | 
 | 				 * Updating i_disksize when extending file | 
 | 				 * without needing block allocation | 
 | 				 */ | 
 | 				if (ext4_should_order_data(inode)) | 
 | 					ret = ext4_jbd2_file_inode(handle, | 
 | 								   inode); | 
 |  | 
 | 				EXT4_I(inode)->i_disksize = new_i_size; | 
 | 			} | 
 | 			up_write(&EXT4_I(inode)->i_data_sem); | 
 | 			/* We need to mark inode dirty even if | 
 | 			 * new_i_size is less that inode->i_size | 
 | 			 * bu greater than i_disksize.(hint delalloc) | 
 | 			 */ | 
 | 			ext4_mark_inode_dirty(handle, inode); | 
 | 		} | 
 | 	} | 
 | 	ret2 = generic_write_end(file, mapping, pos, len, copied, | 
 | 							page, fsdata); | 
 | 	copied = ret2; | 
 | 	if (ret2 < 0) | 
 | 		ret = ret2; | 
 | 	ret2 = ext4_journal_stop(handle); | 
 | 	if (!ret) | 
 | 		ret = ret2; | 
 |  | 
 | 	return ret ? ret : copied; | 
 | } | 
 |  | 
 | static void ext4_da_invalidatepage(struct page *page, unsigned long offset) | 
 | { | 
 | 	/* | 
 | 	 * Drop reserved blocks | 
 | 	 */ | 
 | 	BUG_ON(!PageLocked(page)); | 
 | 	if (!page_has_buffers(page)) | 
 | 		goto out; | 
 |  | 
 | 	ext4_da_page_release_reservation(page, offset); | 
 |  | 
 | out: | 
 | 	ext4_invalidatepage(page, offset); | 
 |  | 
 | 	return; | 
 | } | 
 |  | 
 | /* | 
 |  * Force all delayed allocation blocks to be allocated for a given inode. | 
 |  */ | 
 | int ext4_alloc_da_blocks(struct inode *inode) | 
 | { | 
 | 	if (!EXT4_I(inode)->i_reserved_data_blocks && | 
 | 	    !EXT4_I(inode)->i_reserved_meta_blocks) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * We do something simple for now.  The filemap_flush() will | 
 | 	 * also start triggering a write of the data blocks, which is | 
 | 	 * not strictly speaking necessary (and for users of | 
 | 	 * laptop_mode, not even desirable).  However, to do otherwise | 
 | 	 * would require replicating code paths in: | 
 | 	 * | 
 | 	 * ext4_da_writepages() -> | 
 | 	 *    write_cache_pages() ---> (via passed in callback function) | 
 | 	 *        __mpage_da_writepage() --> | 
 | 	 *           mpage_add_bh_to_extent() | 
 | 	 *           mpage_da_map_blocks() | 
 | 	 * | 
 | 	 * The problem is that write_cache_pages(), located in | 
 | 	 * mm/page-writeback.c, marks pages clean in preparation for | 
 | 	 * doing I/O, which is not desirable if we're not planning on | 
 | 	 * doing I/O at all. | 
 | 	 * | 
 | 	 * We could call write_cache_pages(), and then redirty all of | 
 | 	 * the pages by calling redirty_page_for_writeback() but that | 
 | 	 * would be ugly in the extreme.  So instead we would need to | 
 | 	 * replicate parts of the code in the above functions, | 
 | 	 * simplifying them becuase we wouldn't actually intend to | 
 | 	 * write out the pages, but rather only collect contiguous | 
 | 	 * logical block extents, call the multi-block allocator, and | 
 | 	 * then update the buffer heads with the block allocations. | 
 | 	 * | 
 | 	 * For now, though, we'll cheat by calling filemap_flush(), | 
 | 	 * which will map the blocks, and start the I/O, but not | 
 | 	 * actually wait for the I/O to complete. | 
 | 	 */ | 
 | 	return filemap_flush(inode->i_mapping); | 
 | } | 
 |  | 
 | /* | 
 |  * bmap() is special.  It gets used by applications such as lilo and by | 
 |  * the swapper to find the on-disk block of a specific piece of data. | 
 |  * | 
 |  * Naturally, this is dangerous if the block concerned is still in the | 
 |  * journal.  If somebody makes a swapfile on an ext4 data-journaling | 
 |  * filesystem and enables swap, then they may get a nasty shock when the | 
 |  * data getting swapped to that swapfile suddenly gets overwritten by | 
 |  * the original zero's written out previously to the journal and | 
 |  * awaiting writeback in the kernel's buffer cache. | 
 |  * | 
 |  * So, if we see any bmap calls here on a modified, data-journaled file, | 
 |  * take extra steps to flush any blocks which might be in the cache. | 
 |  */ | 
 | static sector_t ext4_bmap(struct address_space *mapping, sector_t block) | 
 | { | 
 | 	struct inode *inode = mapping->host; | 
 | 	journal_t *journal; | 
 | 	int err; | 
 |  | 
 | 	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY) && | 
 | 			test_opt(inode->i_sb, DELALLOC)) { | 
 | 		/* | 
 | 		 * With delalloc we want to sync the file | 
 | 		 * so that we can make sure we allocate | 
 | 		 * blocks for file | 
 | 		 */ | 
 | 		filemap_write_and_wait(mapping); | 
 | 	} | 
 |  | 
 | 	if (EXT4_JOURNAL(inode) && EXT4_I(inode)->i_state & EXT4_STATE_JDATA) { | 
 | 		/* | 
 | 		 * This is a REALLY heavyweight approach, but the use of | 
 | 		 * bmap on dirty files is expected to be extremely rare: | 
 | 		 * only if we run lilo or swapon on a freshly made file | 
 | 		 * do we expect this to happen. | 
 | 		 * | 
 | 		 * (bmap requires CAP_SYS_RAWIO so this does not | 
 | 		 * represent an unprivileged user DOS attack --- we'd be | 
 | 		 * in trouble if mortal users could trigger this path at | 
 | 		 * will.) | 
 | 		 * | 
 | 		 * NB. EXT4_STATE_JDATA is not set on files other than | 
 | 		 * regular files.  If somebody wants to bmap a directory | 
 | 		 * or symlink and gets confused because the buffer | 
 | 		 * hasn't yet been flushed to disk, they deserve | 
 | 		 * everything they get. | 
 | 		 */ | 
 |  | 
 | 		EXT4_I(inode)->i_state &= ~EXT4_STATE_JDATA; | 
 | 		journal = EXT4_JOURNAL(inode); | 
 | 		jbd2_journal_lock_updates(journal); | 
 | 		err = jbd2_journal_flush(journal); | 
 | 		jbd2_journal_unlock_updates(journal); | 
 |  | 
 | 		if (err) | 
 | 			return 0; | 
 | 	} | 
 |  | 
 | 	return generic_block_bmap(mapping, block, ext4_get_block); | 
 | } | 
 |  | 
 | static int ext4_readpage(struct file *file, struct page *page) | 
 | { | 
 | 	return mpage_readpage(page, ext4_get_block); | 
 | } | 
 |  | 
 | static int | 
 | ext4_readpages(struct file *file, struct address_space *mapping, | 
 | 		struct list_head *pages, unsigned nr_pages) | 
 | { | 
 | 	return mpage_readpages(mapping, pages, nr_pages, ext4_get_block); | 
 | } | 
 |  | 
 | static void ext4_invalidatepage(struct page *page, unsigned long offset) | 
 | { | 
 | 	journal_t *journal = EXT4_JOURNAL(page->mapping->host); | 
 |  | 
 | 	/* | 
 | 	 * If it's a full truncate we just forget about the pending dirtying | 
 | 	 */ | 
 | 	if (offset == 0) | 
 | 		ClearPageChecked(page); | 
 |  | 
 | 	if (journal) | 
 | 		jbd2_journal_invalidatepage(journal, page, offset); | 
 | 	else | 
 | 		block_invalidatepage(page, offset); | 
 | } | 
 |  | 
 | static int ext4_releasepage(struct page *page, gfp_t wait) | 
 | { | 
 | 	journal_t *journal = EXT4_JOURNAL(page->mapping->host); | 
 |  | 
 | 	WARN_ON(PageChecked(page)); | 
 | 	if (!page_has_buffers(page)) | 
 | 		return 0; | 
 | 	if (journal) | 
 | 		return jbd2_journal_try_to_free_buffers(journal, page, wait); | 
 | 	else | 
 | 		return try_to_free_buffers(page); | 
 | } | 
 |  | 
 | /* | 
 |  * If the O_DIRECT write will extend the file then add this inode to the | 
 |  * orphan list.  So recovery will truncate it back to the original size | 
 |  * if the machine crashes during the write. | 
 |  * | 
 |  * If the O_DIRECT write is intantiating holes inside i_size and the machine | 
 |  * crashes then stale disk data _may_ be exposed inside the file. But current | 
 |  * VFS code falls back into buffered path in that case so we are safe. | 
 |  */ | 
 | static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb, | 
 | 			      const struct iovec *iov, loff_t offset, | 
 | 			      unsigned long nr_segs) | 
 | { | 
 | 	struct file *file = iocb->ki_filp; | 
 | 	struct inode *inode = file->f_mapping->host; | 
 | 	struct ext4_inode_info *ei = EXT4_I(inode); | 
 | 	handle_t *handle; | 
 | 	ssize_t ret; | 
 | 	int orphan = 0; | 
 | 	size_t count = iov_length(iov, nr_segs); | 
 |  | 
 | 	if (rw == WRITE) { | 
 | 		loff_t final_size = offset + count; | 
 |  | 
 | 		if (final_size > inode->i_size) { | 
 | 			/* Credits for sb + inode write */ | 
 | 			handle = ext4_journal_start(inode, 2); | 
 | 			if (IS_ERR(handle)) { | 
 | 				ret = PTR_ERR(handle); | 
 | 				goto out; | 
 | 			} | 
 | 			ret = ext4_orphan_add(handle, inode); | 
 | 			if (ret) { | 
 | 				ext4_journal_stop(handle); | 
 | 				goto out; | 
 | 			} | 
 | 			orphan = 1; | 
 | 			ei->i_disksize = inode->i_size; | 
 | 			ext4_journal_stop(handle); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov, | 
 | 				 offset, nr_segs, | 
 | 				 ext4_get_block, NULL); | 
 |  | 
 | 	if (orphan) { | 
 | 		int err; | 
 |  | 
 | 		/* Credits for sb + inode write */ | 
 | 		handle = ext4_journal_start(inode, 2); | 
 | 		if (IS_ERR(handle)) { | 
 | 			/* This is really bad luck. We've written the data | 
 | 			 * but cannot extend i_size. Bail out and pretend | 
 | 			 * the write failed... */ | 
 | 			ret = PTR_ERR(handle); | 
 | 			goto out; | 
 | 		} | 
 | 		if (inode->i_nlink) | 
 | 			ext4_orphan_del(handle, inode); | 
 | 		if (ret > 0) { | 
 | 			loff_t end = offset + ret; | 
 | 			if (end > inode->i_size) { | 
 | 				ei->i_disksize = end; | 
 | 				i_size_write(inode, end); | 
 | 				/* | 
 | 				 * We're going to return a positive `ret' | 
 | 				 * here due to non-zero-length I/O, so there's | 
 | 				 * no way of reporting error returns from | 
 | 				 * ext4_mark_inode_dirty() to userspace.  So | 
 | 				 * ignore it. | 
 | 				 */ | 
 | 				ext4_mark_inode_dirty(handle, inode); | 
 | 			} | 
 | 		} | 
 | 		err = ext4_journal_stop(handle); | 
 | 		if (ret == 0) | 
 | 			ret = err; | 
 | 	} | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Pages can be marked dirty completely asynchronously from ext4's journalling | 
 |  * activity.  By filemap_sync_pte(), try_to_unmap_one(), etc.  We cannot do | 
 |  * much here because ->set_page_dirty is called under VFS locks.  The page is | 
 |  * not necessarily locked. | 
 |  * | 
 |  * We cannot just dirty the page and leave attached buffers clean, because the | 
 |  * buffers' dirty state is "definitive".  We cannot just set the buffers dirty | 
 |  * or jbddirty because all the journalling code will explode. | 
 |  * | 
 |  * So what we do is to mark the page "pending dirty" and next time writepage | 
 |  * is called, propagate that into the buffers appropriately. | 
 |  */ | 
 | static int ext4_journalled_set_page_dirty(struct page *page) | 
 | { | 
 | 	SetPageChecked(page); | 
 | 	return __set_page_dirty_nobuffers(page); | 
 | } | 
 |  | 
 | static const struct address_space_operations ext4_ordered_aops = { | 
 | 	.readpage		= ext4_readpage, | 
 | 	.readpages		= ext4_readpages, | 
 | 	.writepage		= ext4_writepage, | 
 | 	.sync_page		= block_sync_page, | 
 | 	.write_begin		= ext4_write_begin, | 
 | 	.write_end		= ext4_ordered_write_end, | 
 | 	.bmap			= ext4_bmap, | 
 | 	.invalidatepage		= ext4_invalidatepage, | 
 | 	.releasepage		= ext4_releasepage, | 
 | 	.direct_IO		= ext4_direct_IO, | 
 | 	.migratepage		= buffer_migrate_page, | 
 | 	.is_partially_uptodate  = block_is_partially_uptodate, | 
 | }; | 
 |  | 
 | static const struct address_space_operations ext4_writeback_aops = { | 
 | 	.readpage		= ext4_readpage, | 
 | 	.readpages		= ext4_readpages, | 
 | 	.writepage		= ext4_writepage, | 
 | 	.sync_page		= block_sync_page, | 
 | 	.write_begin		= ext4_write_begin, | 
 | 	.write_end		= ext4_writeback_write_end, | 
 | 	.bmap			= ext4_bmap, | 
 | 	.invalidatepage		= ext4_invalidatepage, | 
 | 	.releasepage		= ext4_releasepage, | 
 | 	.direct_IO		= ext4_direct_IO, | 
 | 	.migratepage		= buffer_migrate_page, | 
 | 	.is_partially_uptodate  = block_is_partially_uptodate, | 
 | }; | 
 |  | 
 | static const struct address_space_operations ext4_journalled_aops = { | 
 | 	.readpage		= ext4_readpage, | 
 | 	.readpages		= ext4_readpages, | 
 | 	.writepage		= ext4_writepage, | 
 | 	.sync_page		= block_sync_page, | 
 | 	.write_begin		= ext4_write_begin, | 
 | 	.write_end		= ext4_journalled_write_end, | 
 | 	.set_page_dirty		= ext4_journalled_set_page_dirty, | 
 | 	.bmap			= ext4_bmap, | 
 | 	.invalidatepage		= ext4_invalidatepage, | 
 | 	.releasepage		= ext4_releasepage, | 
 | 	.is_partially_uptodate  = block_is_partially_uptodate, | 
 | }; | 
 |  | 
 | static const struct address_space_operations ext4_da_aops = { | 
 | 	.readpage		= ext4_readpage, | 
 | 	.readpages		= ext4_readpages, | 
 | 	.writepage		= ext4_writepage, | 
 | 	.writepages		= ext4_da_writepages, | 
 | 	.sync_page		= block_sync_page, | 
 | 	.write_begin		= ext4_da_write_begin, | 
 | 	.write_end		= ext4_da_write_end, | 
 | 	.bmap			= ext4_bmap, | 
 | 	.invalidatepage		= ext4_da_invalidatepage, | 
 | 	.releasepage		= ext4_releasepage, | 
 | 	.direct_IO		= ext4_direct_IO, | 
 | 	.migratepage		= buffer_migrate_page, | 
 | 	.is_partially_uptodate  = block_is_partially_uptodate, | 
 | }; | 
 |  | 
 | void ext4_set_aops(struct inode *inode) | 
 | { | 
 | 	if (ext4_should_order_data(inode) && | 
 | 		test_opt(inode->i_sb, DELALLOC)) | 
 | 		inode->i_mapping->a_ops = &ext4_da_aops; | 
 | 	else if (ext4_should_order_data(inode)) | 
 | 		inode->i_mapping->a_ops = &ext4_ordered_aops; | 
 | 	else if (ext4_should_writeback_data(inode) && | 
 | 		 test_opt(inode->i_sb, DELALLOC)) | 
 | 		inode->i_mapping->a_ops = &ext4_da_aops; | 
 | 	else if (ext4_should_writeback_data(inode)) | 
 | 		inode->i_mapping->a_ops = &ext4_writeback_aops; | 
 | 	else | 
 | 		inode->i_mapping->a_ops = &ext4_journalled_aops; | 
 | } | 
 |  | 
 | /* | 
 |  * ext4_block_truncate_page() zeroes out a mapping from file offset `from' | 
 |  * up to the end of the block which corresponds to `from'. | 
 |  * This required during truncate. We need to physically zero the tail end | 
 |  * of that block so it doesn't yield old data if the file is later grown. | 
 |  */ | 
 | int ext4_block_truncate_page(handle_t *handle, | 
 | 		struct address_space *mapping, loff_t from) | 
 | { | 
 | 	ext4_fsblk_t index = from >> PAGE_CACHE_SHIFT; | 
 | 	unsigned offset = from & (PAGE_CACHE_SIZE-1); | 
 | 	unsigned blocksize, length, pos; | 
 | 	ext4_lblk_t iblock; | 
 | 	struct inode *inode = mapping->host; | 
 | 	struct buffer_head *bh; | 
 | 	struct page *page; | 
 | 	int err = 0; | 
 |  | 
 | 	page = find_or_create_page(mapping, from >> PAGE_CACHE_SHIFT, | 
 | 				   mapping_gfp_mask(mapping) & ~__GFP_FS); | 
 | 	if (!page) | 
 | 		return -EINVAL; | 
 |  | 
 | 	blocksize = inode->i_sb->s_blocksize; | 
 | 	length = blocksize - (offset & (blocksize - 1)); | 
 | 	iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits); | 
 |  | 
 | 	/* | 
 | 	 * For "nobh" option,  we can only work if we don't need to | 
 | 	 * read-in the page - otherwise we create buffers to do the IO. | 
 | 	 */ | 
 | 	if (!page_has_buffers(page) && test_opt(inode->i_sb, NOBH) && | 
 | 	     ext4_should_writeback_data(inode) && PageUptodate(page)) { | 
 | 		zero_user(page, offset, length); | 
 | 		set_page_dirty(page); | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (!page_has_buffers(page)) | 
 | 		create_empty_buffers(page, blocksize, 0); | 
 |  | 
 | 	/* Find the buffer that contains "offset" */ | 
 | 	bh = page_buffers(page); | 
 | 	pos = blocksize; | 
 | 	while (offset >= pos) { | 
 | 		bh = bh->b_this_page; | 
 | 		iblock++; | 
 | 		pos += blocksize; | 
 | 	} | 
 |  | 
 | 	err = 0; | 
 | 	if (buffer_freed(bh)) { | 
 | 		BUFFER_TRACE(bh, "freed: skip"); | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (!buffer_mapped(bh)) { | 
 | 		BUFFER_TRACE(bh, "unmapped"); | 
 | 		ext4_get_block(inode, iblock, bh, 0); | 
 | 		/* unmapped? It's a hole - nothing to do */ | 
 | 		if (!buffer_mapped(bh)) { | 
 | 			BUFFER_TRACE(bh, "still unmapped"); | 
 | 			goto unlock; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Ok, it's mapped. Make sure it's up-to-date */ | 
 | 	if (PageUptodate(page)) | 
 | 		set_buffer_uptodate(bh); | 
 |  | 
 | 	if (!buffer_uptodate(bh)) { | 
 | 		err = -EIO; | 
 | 		ll_rw_block(READ, 1, &bh); | 
 | 		wait_on_buffer(bh); | 
 | 		/* Uhhuh. Read error. Complain and punt. */ | 
 | 		if (!buffer_uptodate(bh)) | 
 | 			goto unlock; | 
 | 	} | 
 |  | 
 | 	if (ext4_should_journal_data(inode)) { | 
 | 		BUFFER_TRACE(bh, "get write access"); | 
 | 		err = ext4_journal_get_write_access(handle, bh); | 
 | 		if (err) | 
 | 			goto unlock; | 
 | 	} | 
 |  | 
 | 	zero_user(page, offset, length); | 
 |  | 
 | 	BUFFER_TRACE(bh, "zeroed end of block"); | 
 |  | 
 | 	err = 0; | 
 | 	if (ext4_should_journal_data(inode)) { | 
 | 		err = ext4_handle_dirty_metadata(handle, inode, bh); | 
 | 	} else { | 
 | 		if (ext4_should_order_data(inode)) | 
 | 			err = ext4_jbd2_file_inode(handle, inode); | 
 | 		mark_buffer_dirty(bh); | 
 | 	} | 
 |  | 
 | unlock: | 
 | 	unlock_page(page); | 
 | 	page_cache_release(page); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * Probably it should be a library function... search for first non-zero word | 
 |  * or memcmp with zero_page, whatever is better for particular architecture. | 
 |  * Linus? | 
 |  */ | 
 | static inline int all_zeroes(__le32 *p, __le32 *q) | 
 | { | 
 | 	while (p < q) | 
 | 		if (*p++) | 
 | 			return 0; | 
 | 	return 1; | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_find_shared - find the indirect blocks for partial truncation. | 
 |  *	@inode:	  inode in question | 
 |  *	@depth:	  depth of the affected branch | 
 |  *	@offsets: offsets of pointers in that branch (see ext4_block_to_path) | 
 |  *	@chain:	  place to store the pointers to partial indirect blocks | 
 |  *	@top:	  place to the (detached) top of branch | 
 |  * | 
 |  *	This is a helper function used by ext4_truncate(). | 
 |  * | 
 |  *	When we do truncate() we may have to clean the ends of several | 
 |  *	indirect blocks but leave the blocks themselves alive. Block is | 
 |  *	partially truncated if some data below the new i_size is refered | 
 |  *	from it (and it is on the path to the first completely truncated | 
 |  *	data block, indeed).  We have to free the top of that path along | 
 |  *	with everything to the right of the path. Since no allocation | 
 |  *	past the truncation point is possible until ext4_truncate() | 
 |  *	finishes, we may safely do the latter, but top of branch may | 
 |  *	require special attention - pageout below the truncation point | 
 |  *	might try to populate it. | 
 |  * | 
 |  *	We atomically detach the top of branch from the tree, store the | 
 |  *	block number of its root in *@top, pointers to buffer_heads of | 
 |  *	partially truncated blocks - in @chain[].bh and pointers to | 
 |  *	their last elements that should not be removed - in | 
 |  *	@chain[].p. Return value is the pointer to last filled element | 
 |  *	of @chain. | 
 |  * | 
 |  *	The work left to caller to do the actual freeing of subtrees: | 
 |  *		a) free the subtree starting from *@top | 
 |  *		b) free the subtrees whose roots are stored in | 
 |  *			(@chain[i].p+1 .. end of @chain[i].bh->b_data) | 
 |  *		c) free the subtrees growing from the inode past the @chain[0]. | 
 |  *			(no partially truncated stuff there).  */ | 
 |  | 
 | static Indirect *ext4_find_shared(struct inode *inode, int depth, | 
 | 				  ext4_lblk_t offsets[4], Indirect chain[4], | 
 | 				  __le32 *top) | 
 | { | 
 | 	Indirect *partial, *p; | 
 | 	int k, err; | 
 |  | 
 | 	*top = 0; | 
 | 	/* Make k index the deepest non-null offest + 1 */ | 
 | 	for (k = depth; k > 1 && !offsets[k-1]; k--) | 
 | 		; | 
 | 	partial = ext4_get_branch(inode, k, offsets, chain, &err); | 
 | 	/* Writer: pointers */ | 
 | 	if (!partial) | 
 | 		partial = chain + k-1; | 
 | 	/* | 
 | 	 * If the branch acquired continuation since we've looked at it - | 
 | 	 * fine, it should all survive and (new) top doesn't belong to us. | 
 | 	 */ | 
 | 	if (!partial->key && *partial->p) | 
 | 		/* Writer: end */ | 
 | 		goto no_top; | 
 | 	for (p = partial; (p > chain) && all_zeroes((__le32 *) p->bh->b_data, p->p); p--) | 
 | 		; | 
 | 	/* | 
 | 	 * OK, we've found the last block that must survive. The rest of our | 
 | 	 * branch should be detached before unlocking. However, if that rest | 
 | 	 * of branch is all ours and does not grow immediately from the inode | 
 | 	 * it's easier to cheat and just decrement partial->p. | 
 | 	 */ | 
 | 	if (p == chain + k - 1 && p > chain) { | 
 | 		p->p--; | 
 | 	} else { | 
 | 		*top = *p->p; | 
 | 		/* Nope, don't do this in ext4.  Must leave the tree intact */ | 
 | #if 0 | 
 | 		*p->p = 0; | 
 | #endif | 
 | 	} | 
 | 	/* Writer: end */ | 
 |  | 
 | 	while (partial > p) { | 
 | 		brelse(partial->bh); | 
 | 		partial--; | 
 | 	} | 
 | no_top: | 
 | 	return partial; | 
 | } | 
 |  | 
 | /* | 
 |  * Zero a number of block pointers in either an inode or an indirect block. | 
 |  * If we restart the transaction we must again get write access to the | 
 |  * indirect block for further modification. | 
 |  * | 
 |  * We release `count' blocks on disk, but (last - first) may be greater | 
 |  * than `count' because there can be holes in there. | 
 |  */ | 
 | static void ext4_clear_blocks(handle_t *handle, struct inode *inode, | 
 | 			      struct buffer_head *bh, | 
 | 			      ext4_fsblk_t block_to_free, | 
 | 			      unsigned long count, __le32 *first, | 
 | 			      __le32 *last) | 
 | { | 
 | 	__le32 *p; | 
 | 	if (try_to_extend_transaction(handle, inode)) { | 
 | 		if (bh) { | 
 | 			BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | 
 | 			ext4_handle_dirty_metadata(handle, inode, bh); | 
 | 		} | 
 | 		ext4_mark_inode_dirty(handle, inode); | 
 | 		ext4_journal_test_restart(handle, inode); | 
 | 		if (bh) { | 
 | 			BUFFER_TRACE(bh, "retaking write access"); | 
 | 			ext4_journal_get_write_access(handle, bh); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Any buffers which are on the journal will be in memory. We | 
 | 	 * find them on the hash table so jbd2_journal_revoke() will | 
 | 	 * run jbd2_journal_forget() on them.  We've already detached | 
 | 	 * each block from the file, so bforget() in | 
 | 	 * jbd2_journal_forget() should be safe. | 
 | 	 * | 
 | 	 * AKPM: turn on bforget in jbd2_journal_forget()!!! | 
 | 	 */ | 
 | 	for (p = first; p < last; p++) { | 
 | 		u32 nr = le32_to_cpu(*p); | 
 | 		if (nr) { | 
 | 			struct buffer_head *tbh; | 
 |  | 
 | 			*p = 0; | 
 | 			tbh = sb_find_get_block(inode->i_sb, nr); | 
 | 			ext4_forget(handle, 0, inode, tbh, nr); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ext4_free_blocks(handle, inode, block_to_free, count, 0); | 
 | } | 
 |  | 
 | /** | 
 |  * ext4_free_data - free a list of data blocks | 
 |  * @handle:	handle for this transaction | 
 |  * @inode:	inode we are dealing with | 
 |  * @this_bh:	indirect buffer_head which contains *@first and *@last | 
 |  * @first:	array of block numbers | 
 |  * @last:	points immediately past the end of array | 
 |  * | 
 |  * We are freeing all blocks refered from that array (numbers are stored as | 
 |  * little-endian 32-bit) and updating @inode->i_blocks appropriately. | 
 |  * | 
 |  * We accumulate contiguous runs of blocks to free.  Conveniently, if these | 
 |  * blocks are contiguous then releasing them at one time will only affect one | 
 |  * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't | 
 |  * actually use a lot of journal space. | 
 |  * | 
 |  * @this_bh will be %NULL if @first and @last point into the inode's direct | 
 |  * block pointers. | 
 |  */ | 
 | static void ext4_free_data(handle_t *handle, struct inode *inode, | 
 | 			   struct buffer_head *this_bh, | 
 | 			   __le32 *first, __le32 *last) | 
 | { | 
 | 	ext4_fsblk_t block_to_free = 0;    /* Starting block # of a run */ | 
 | 	unsigned long count = 0;	    /* Number of blocks in the run */ | 
 | 	__le32 *block_to_free_p = NULL;	    /* Pointer into inode/ind | 
 | 					       corresponding to | 
 | 					       block_to_free */ | 
 | 	ext4_fsblk_t nr;		    /* Current block # */ | 
 | 	__le32 *p;			    /* Pointer into inode/ind | 
 | 					       for current block */ | 
 | 	int err; | 
 |  | 
 | 	if (this_bh) {				/* For indirect block */ | 
 | 		BUFFER_TRACE(this_bh, "get_write_access"); | 
 | 		err = ext4_journal_get_write_access(handle, this_bh); | 
 | 		/* Important: if we can't update the indirect pointers | 
 | 		 * to the blocks, we can't free them. */ | 
 | 		if (err) | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	for (p = first; p < last; p++) { | 
 | 		nr = le32_to_cpu(*p); | 
 | 		if (nr) { | 
 | 			/* accumulate blocks to free if they're contiguous */ | 
 | 			if (count == 0) { | 
 | 				block_to_free = nr; | 
 | 				block_to_free_p = p; | 
 | 				count = 1; | 
 | 			} else if (nr == block_to_free + count) { | 
 | 				count++; | 
 | 			} else { | 
 | 				ext4_clear_blocks(handle, inode, this_bh, | 
 | 						  block_to_free, | 
 | 						  count, block_to_free_p, p); | 
 | 				block_to_free = nr; | 
 | 				block_to_free_p = p; | 
 | 				count = 1; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (count > 0) | 
 | 		ext4_clear_blocks(handle, inode, this_bh, block_to_free, | 
 | 				  count, block_to_free_p, p); | 
 |  | 
 | 	if (this_bh) { | 
 | 		BUFFER_TRACE(this_bh, "call ext4_handle_dirty_metadata"); | 
 |  | 
 | 		/* | 
 | 		 * The buffer head should have an attached journal head at this | 
 | 		 * point. However, if the data is corrupted and an indirect | 
 | 		 * block pointed to itself, it would have been detached when | 
 | 		 * the block was cleared. Check for this instead of OOPSing. | 
 | 		 */ | 
 | 		if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh)) | 
 | 			ext4_handle_dirty_metadata(handle, inode, this_bh); | 
 | 		else | 
 | 			ext4_error(inode->i_sb, __func__, | 
 | 				   "circular indirect block detected, " | 
 | 				   "inode=%lu, block=%llu", | 
 | 				   inode->i_ino, | 
 | 				   (unsigned long long) this_bh->b_blocknr); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_free_branches - free an array of branches | 
 |  *	@handle: JBD handle for this transaction | 
 |  *	@inode:	inode we are dealing with | 
 |  *	@parent_bh: the buffer_head which contains *@first and *@last | 
 |  *	@first:	array of block numbers | 
 |  *	@last:	pointer immediately past the end of array | 
 |  *	@depth:	depth of the branches to free | 
 |  * | 
 |  *	We are freeing all blocks refered from these branches (numbers are | 
 |  *	stored as little-endian 32-bit) and updating @inode->i_blocks | 
 |  *	appropriately. | 
 |  */ | 
 | static void ext4_free_branches(handle_t *handle, struct inode *inode, | 
 | 			       struct buffer_head *parent_bh, | 
 | 			       __le32 *first, __le32 *last, int depth) | 
 | { | 
 | 	ext4_fsblk_t nr; | 
 | 	__le32 *p; | 
 |  | 
 | 	if (ext4_handle_is_aborted(handle)) | 
 | 		return; | 
 |  | 
 | 	if (depth--) { | 
 | 		struct buffer_head *bh; | 
 | 		int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
 | 		p = last; | 
 | 		while (--p >= first) { | 
 | 			nr = le32_to_cpu(*p); | 
 | 			if (!nr) | 
 | 				continue;		/* A hole */ | 
 |  | 
 | 			/* Go read the buffer for the next level down */ | 
 | 			bh = sb_bread(inode->i_sb, nr); | 
 |  | 
 | 			/* | 
 | 			 * A read failure? Report error and clear slot | 
 | 			 * (should be rare). | 
 | 			 */ | 
 | 			if (!bh) { | 
 | 				ext4_error(inode->i_sb, "ext4_free_branches", | 
 | 					   "Read failure, inode=%lu, block=%llu", | 
 | 					   inode->i_ino, nr); | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			/* This zaps the entire block.  Bottom up. */ | 
 | 			BUFFER_TRACE(bh, "free child branches"); | 
 | 			ext4_free_branches(handle, inode, bh, | 
 | 					(__le32 *) bh->b_data, | 
 | 					(__le32 *) bh->b_data + addr_per_block, | 
 | 					depth); | 
 |  | 
 | 			/* | 
 | 			 * We've probably journalled the indirect block several | 
 | 			 * times during the truncate.  But it's no longer | 
 | 			 * needed and we now drop it from the transaction via | 
 | 			 * jbd2_journal_revoke(). | 
 | 			 * | 
 | 			 * That's easy if it's exclusively part of this | 
 | 			 * transaction.  But if it's part of the committing | 
 | 			 * transaction then jbd2_journal_forget() will simply | 
 | 			 * brelse() it.  That means that if the underlying | 
 | 			 * block is reallocated in ext4_get_block(), | 
 | 			 * unmap_underlying_metadata() will find this block | 
 | 			 * and will try to get rid of it.  damn, damn. | 
 | 			 * | 
 | 			 * If this block has already been committed to the | 
 | 			 * journal, a revoke record will be written.  And | 
 | 			 * revoke records must be emitted *before* clearing | 
 | 			 * this block's bit in the bitmaps. | 
 | 			 */ | 
 | 			ext4_forget(handle, 1, inode, bh, bh->b_blocknr); | 
 |  | 
 | 			/* | 
 | 			 * Everything below this this pointer has been | 
 | 			 * released.  Now let this top-of-subtree go. | 
 | 			 * | 
 | 			 * We want the freeing of this indirect block to be | 
 | 			 * atomic in the journal with the updating of the | 
 | 			 * bitmap block which owns it.  So make some room in | 
 | 			 * the journal. | 
 | 			 * | 
 | 			 * We zero the parent pointer *after* freeing its | 
 | 			 * pointee in the bitmaps, so if extend_transaction() | 
 | 			 * for some reason fails to put the bitmap changes and | 
 | 			 * the release into the same transaction, recovery | 
 | 			 * will merely complain about releasing a free block, | 
 | 			 * rather than leaking blocks. | 
 | 			 */ | 
 | 			if (ext4_handle_is_aborted(handle)) | 
 | 				return; | 
 | 			if (try_to_extend_transaction(handle, inode)) { | 
 | 				ext4_mark_inode_dirty(handle, inode); | 
 | 				ext4_journal_test_restart(handle, inode); | 
 | 			} | 
 |  | 
 | 			ext4_free_blocks(handle, inode, nr, 1, 1); | 
 |  | 
 | 			if (parent_bh) { | 
 | 				/* | 
 | 				 * The block which we have just freed is | 
 | 				 * pointed to by an indirect block: journal it | 
 | 				 */ | 
 | 				BUFFER_TRACE(parent_bh, "get_write_access"); | 
 | 				if (!ext4_journal_get_write_access(handle, | 
 | 								   parent_bh)){ | 
 | 					*p = 0; | 
 | 					BUFFER_TRACE(parent_bh, | 
 | 					"call ext4_handle_dirty_metadata"); | 
 | 					ext4_handle_dirty_metadata(handle, | 
 | 								   inode, | 
 | 								   parent_bh); | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	} else { | 
 | 		/* We have reached the bottom of the tree. */ | 
 | 		BUFFER_TRACE(parent_bh, "free data blocks"); | 
 | 		ext4_free_data(handle, inode, parent_bh, first, last); | 
 | 	} | 
 | } | 
 |  | 
 | int ext4_can_truncate(struct inode *inode) | 
 | { | 
 | 	if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) | 
 | 		return 0; | 
 | 	if (S_ISREG(inode->i_mode)) | 
 | 		return 1; | 
 | 	if (S_ISDIR(inode->i_mode)) | 
 | 		return 1; | 
 | 	if (S_ISLNK(inode->i_mode)) | 
 | 		return !ext4_inode_is_fast_symlink(inode); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * ext4_truncate() | 
 |  * | 
 |  * We block out ext4_get_block() block instantiations across the entire | 
 |  * transaction, and VFS/VM ensures that ext4_truncate() cannot run | 
 |  * simultaneously on behalf of the same inode. | 
 |  * | 
 |  * As we work through the truncate and commmit bits of it to the journal there | 
 |  * is one core, guiding principle: the file's tree must always be consistent on | 
 |  * disk.  We must be able to restart the truncate after a crash. | 
 |  * | 
 |  * The file's tree may be transiently inconsistent in memory (although it | 
 |  * probably isn't), but whenever we close off and commit a journal transaction, | 
 |  * the contents of (the filesystem + the journal) must be consistent and | 
 |  * restartable.  It's pretty simple, really: bottom up, right to left (although | 
 |  * left-to-right works OK too). | 
 |  * | 
 |  * Note that at recovery time, journal replay occurs *before* the restart of | 
 |  * truncate against the orphan inode list. | 
 |  * | 
 |  * The committed inode has the new, desired i_size (which is the same as | 
 |  * i_disksize in this case).  After a crash, ext4_orphan_cleanup() will see | 
 |  * that this inode's truncate did not complete and it will again call | 
 |  * ext4_truncate() to have another go.  So there will be instantiated blocks | 
 |  * to the right of the truncation point in a crashed ext4 filesystem.  But | 
 |  * that's fine - as long as they are linked from the inode, the post-crash | 
 |  * ext4_truncate() run will find them and release them. | 
 |  */ | 
 | void ext4_truncate(struct inode *inode) | 
 | { | 
 | 	handle_t *handle; | 
 | 	struct ext4_inode_info *ei = EXT4_I(inode); | 
 | 	__le32 *i_data = ei->i_data; | 
 | 	int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
 | 	struct address_space *mapping = inode->i_mapping; | 
 | 	ext4_lblk_t offsets[4]; | 
 | 	Indirect chain[4]; | 
 | 	Indirect *partial; | 
 | 	__le32 nr = 0; | 
 | 	int n; | 
 | 	ext4_lblk_t last_block; | 
 | 	unsigned blocksize = inode->i_sb->s_blocksize; | 
 |  | 
 | 	if (!ext4_can_truncate(inode)) | 
 | 		return; | 
 |  | 
 | 	if (ei->i_disksize && inode->i_size == 0 && | 
 | 	    !test_opt(inode->i_sb, NO_AUTO_DA_ALLOC)) | 
 | 		ei->i_state |= EXT4_STATE_DA_ALLOC_CLOSE; | 
 |  | 
 | 	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) { | 
 | 		ext4_ext_truncate(inode); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	handle = start_transaction(inode); | 
 | 	if (IS_ERR(handle)) | 
 | 		return;		/* AKPM: return what? */ | 
 |  | 
 | 	last_block = (inode->i_size + blocksize-1) | 
 | 					>> EXT4_BLOCK_SIZE_BITS(inode->i_sb); | 
 |  | 
 | 	if (inode->i_size & (blocksize - 1)) | 
 | 		if (ext4_block_truncate_page(handle, mapping, inode->i_size)) | 
 | 			goto out_stop; | 
 |  | 
 | 	n = ext4_block_to_path(inode, last_block, offsets, NULL); | 
 | 	if (n == 0) | 
 | 		goto out_stop;	/* error */ | 
 |  | 
 | 	/* | 
 | 	 * OK.  This truncate is going to happen.  We add the inode to the | 
 | 	 * orphan list, so that if this truncate spans multiple transactions, | 
 | 	 * and we crash, we will resume the truncate when the filesystem | 
 | 	 * recovers.  It also marks the inode dirty, to catch the new size. | 
 | 	 * | 
 | 	 * Implication: the file must always be in a sane, consistent | 
 | 	 * truncatable state while each transaction commits. | 
 | 	 */ | 
 | 	if (ext4_orphan_add(handle, inode)) | 
 | 		goto out_stop; | 
 |  | 
 | 	/* | 
 | 	 * From here we block out all ext4_get_block() callers who want to | 
 | 	 * modify the block allocation tree. | 
 | 	 */ | 
 | 	down_write(&ei->i_data_sem); | 
 |  | 
 | 	ext4_discard_preallocations(inode); | 
 |  | 
 | 	/* | 
 | 	 * The orphan list entry will now protect us from any crash which | 
 | 	 * occurs before the truncate completes, so it is now safe to propagate | 
 | 	 * the new, shorter inode size (held for now in i_size) into the | 
 | 	 * on-disk inode. We do this via i_disksize, which is the value which | 
 | 	 * ext4 *really* writes onto the disk inode. | 
 | 	 */ | 
 | 	ei->i_disksize = inode->i_size; | 
 |  | 
 | 	if (n == 1) {		/* direct blocks */ | 
 | 		ext4_free_data(handle, inode, NULL, i_data+offsets[0], | 
 | 			       i_data + EXT4_NDIR_BLOCKS); | 
 | 		goto do_indirects; | 
 | 	} | 
 |  | 
 | 	partial = ext4_find_shared(inode, n, offsets, chain, &nr); | 
 | 	/* Kill the top of shared branch (not detached) */ | 
 | 	if (nr) { | 
 | 		if (partial == chain) { | 
 | 			/* Shared branch grows from the inode */ | 
 | 			ext4_free_branches(handle, inode, NULL, | 
 | 					   &nr, &nr+1, (chain+n-1) - partial); | 
 | 			*partial->p = 0; | 
 | 			/* | 
 | 			 * We mark the inode dirty prior to restart, | 
 | 			 * and prior to stop.  No need for it here. | 
 | 			 */ | 
 | 		} else { | 
 | 			/* Shared branch grows from an indirect block */ | 
 | 			BUFFER_TRACE(partial->bh, "get_write_access"); | 
 | 			ext4_free_branches(handle, inode, partial->bh, | 
 | 					partial->p, | 
 | 					partial->p+1, (chain+n-1) - partial); | 
 | 		} | 
 | 	} | 
 | 	/* Clear the ends of indirect blocks on the shared branch */ | 
 | 	while (partial > chain) { | 
 | 		ext4_free_branches(handle, inode, partial->bh, partial->p + 1, | 
 | 				   (__le32*)partial->bh->b_data+addr_per_block, | 
 | 				   (chain+n-1) - partial); | 
 | 		BUFFER_TRACE(partial->bh, "call brelse"); | 
 | 		brelse(partial->bh); | 
 | 		partial--; | 
 | 	} | 
 | do_indirects: | 
 | 	/* Kill the remaining (whole) subtrees */ | 
 | 	switch (offsets[0]) { | 
 | 	default: | 
 | 		nr = i_data[EXT4_IND_BLOCK]; | 
 | 		if (nr) { | 
 | 			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); | 
 | 			i_data[EXT4_IND_BLOCK] = 0; | 
 | 		} | 
 | 	case EXT4_IND_BLOCK: | 
 | 		nr = i_data[EXT4_DIND_BLOCK]; | 
 | 		if (nr) { | 
 | 			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); | 
 | 			i_data[EXT4_DIND_BLOCK] = 0; | 
 | 		} | 
 | 	case EXT4_DIND_BLOCK: | 
 | 		nr = i_data[EXT4_TIND_BLOCK]; | 
 | 		if (nr) { | 
 | 			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); | 
 | 			i_data[EXT4_TIND_BLOCK] = 0; | 
 | 		} | 
 | 	case EXT4_TIND_BLOCK: | 
 | 		; | 
 | 	} | 
 |  | 
 | 	up_write(&ei->i_data_sem); | 
 | 	inode->i_mtime = inode->i_ctime = ext4_current_time(inode); | 
 | 	ext4_mark_inode_dirty(handle, inode); | 
 |  | 
 | 	/* | 
 | 	 * In a multi-transaction truncate, we only make the final transaction | 
 | 	 * synchronous | 
 | 	 */ | 
 | 	if (IS_SYNC(inode)) | 
 | 		ext4_handle_sync(handle); | 
 | out_stop: | 
 | 	/* | 
 | 	 * If this was a simple ftruncate(), and the file will remain alive | 
 | 	 * then we need to clear up the orphan record which we created above. | 
 | 	 * However, if this was a real unlink then we were called by | 
 | 	 * ext4_delete_inode(), and we allow that function to clean up the | 
 | 	 * orphan info for us. | 
 | 	 */ | 
 | 	if (inode->i_nlink) | 
 | 		ext4_orphan_del(handle, inode); | 
 |  | 
 | 	ext4_journal_stop(handle); | 
 | } | 
 |  | 
 | /* | 
 |  * ext4_get_inode_loc returns with an extra refcount against the inode's | 
 |  * underlying buffer_head on success. If 'in_mem' is true, we have all | 
 |  * data in memory that is needed to recreate the on-disk version of this | 
 |  * inode. | 
 |  */ | 
 | static int __ext4_get_inode_loc(struct inode *inode, | 
 | 				struct ext4_iloc *iloc, int in_mem) | 
 | { | 
 | 	struct ext4_group_desc	*gdp; | 
 | 	struct buffer_head	*bh; | 
 | 	struct super_block	*sb = inode->i_sb; | 
 | 	ext4_fsblk_t		block; | 
 | 	int			inodes_per_block, inode_offset; | 
 |  | 
 | 	iloc->bh = NULL; | 
 | 	if (!ext4_valid_inum(sb, inode->i_ino)) | 
 | 		return -EIO; | 
 |  | 
 | 	iloc->block_group = (inode->i_ino - 1) / EXT4_INODES_PER_GROUP(sb); | 
 | 	gdp = ext4_get_group_desc(sb, iloc->block_group, NULL); | 
 | 	if (!gdp) | 
 | 		return -EIO; | 
 |  | 
 | 	/* | 
 | 	 * Figure out the offset within the block group inode table | 
 | 	 */ | 
 | 	inodes_per_block = (EXT4_BLOCK_SIZE(sb) / EXT4_INODE_SIZE(sb)); | 
 | 	inode_offset = ((inode->i_ino - 1) % | 
 | 			EXT4_INODES_PER_GROUP(sb)); | 
 | 	block = ext4_inode_table(sb, gdp) + (inode_offset / inodes_per_block); | 
 | 	iloc->offset = (inode_offset % inodes_per_block) * EXT4_INODE_SIZE(sb); | 
 |  | 
 | 	bh = sb_getblk(sb, block); | 
 | 	if (!bh) { | 
 | 		ext4_error(sb, "ext4_get_inode_loc", "unable to read " | 
 | 			   "inode block - inode=%lu, block=%llu", | 
 | 			   inode->i_ino, block); | 
 | 		return -EIO; | 
 | 	} | 
 | 	if (!buffer_uptodate(bh)) { | 
 | 		lock_buffer(bh); | 
 |  | 
 | 		/* | 
 | 		 * If the buffer has the write error flag, we have failed | 
 | 		 * to write out another inode in the same block.  In this | 
 | 		 * case, we don't have to read the block because we may | 
 | 		 * read the old inode data successfully. | 
 | 		 */ | 
 | 		if (buffer_write_io_error(bh) && !buffer_uptodate(bh)) | 
 | 			set_buffer_uptodate(bh); | 
 |  | 
 | 		if (buffer_uptodate(bh)) { | 
 | 			/* someone brought it uptodate while we waited */ | 
 | 			unlock_buffer(bh); | 
 | 			goto has_buffer; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * If we have all information of the inode in memory and this | 
 | 		 * is the only valid inode in the block, we need not read the | 
 | 		 * block. | 
 | 		 */ | 
 | 		if (in_mem) { | 
 | 			struct buffer_head *bitmap_bh; | 
 | 			int i, start; | 
 |  | 
 | 			start = inode_offset & ~(inodes_per_block - 1); | 
 |  | 
 | 			/* Is the inode bitmap in cache? */ | 
 | 			bitmap_bh = sb_getblk(sb, ext4_inode_bitmap(sb, gdp)); | 
 | 			if (!bitmap_bh) | 
 | 				goto make_io; | 
 |  | 
 | 			/* | 
 | 			 * If the inode bitmap isn't in cache then the | 
 | 			 * optimisation may end up performing two reads instead | 
 | 			 * of one, so skip it. | 
 | 			 */ | 
 | 			if (!buffer_uptodate(bitmap_bh)) { | 
 | 				brelse(bitmap_bh); | 
 | 				goto make_io; | 
 | 			} | 
 | 			for (i = start; i < start + inodes_per_block; i++) { | 
 | 				if (i == inode_offset) | 
 | 					continue; | 
 | 				if (ext4_test_bit(i, bitmap_bh->b_data)) | 
 | 					break; | 
 | 			} | 
 | 			brelse(bitmap_bh); | 
 | 			if (i == start + inodes_per_block) { | 
 | 				/* all other inodes are free, so skip I/O */ | 
 | 				memset(bh->b_data, 0, bh->b_size); | 
 | 				set_buffer_uptodate(bh); | 
 | 				unlock_buffer(bh); | 
 | 				goto has_buffer; | 
 | 			} | 
 | 		} | 
 |  | 
 | make_io: | 
 | 		/* | 
 | 		 * If we need to do any I/O, try to pre-readahead extra | 
 | 		 * blocks from the inode table. | 
 | 		 */ | 
 | 		if (EXT4_SB(sb)->s_inode_readahead_blks) { | 
 | 			ext4_fsblk_t b, end, table; | 
 | 			unsigned num; | 
 |  | 
 | 			table = ext4_inode_table(sb, gdp); | 
 | 			/* s_inode_readahead_blks is always a power of 2 */ | 
 | 			b = block & ~(EXT4_SB(sb)->s_inode_readahead_blks-1); | 
 | 			if (table > b) | 
 | 				b = table; | 
 | 			end = b + EXT4_SB(sb)->s_inode_readahead_blks; | 
 | 			num = EXT4_INODES_PER_GROUP(sb); | 
 | 			if (EXT4_HAS_RO_COMPAT_FEATURE(sb, | 
 | 				       EXT4_FEATURE_RO_COMPAT_GDT_CSUM)) | 
 | 				num -= ext4_itable_unused_count(sb, gdp); | 
 | 			table += num / inodes_per_block; | 
 | 			if (end > table) | 
 | 				end = table; | 
 | 			while (b <= end) | 
 | 				sb_breadahead(sb, b++); | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * There are other valid inodes in the buffer, this inode | 
 | 		 * has in-inode xattrs, or we don't have this inode in memory. | 
 | 		 * Read the block from disk. | 
 | 		 */ | 
 | 		get_bh(bh); | 
 | 		bh->b_end_io = end_buffer_read_sync; | 
 | 		submit_bh(READ_META, bh); | 
 | 		wait_on_buffer(bh); | 
 | 		if (!buffer_uptodate(bh)) { | 
 | 			ext4_error(sb, __func__, | 
 | 				   "unable to read inode block - inode=%lu, " | 
 | 				   "block=%llu", inode->i_ino, block); | 
 | 			brelse(bh); | 
 | 			return -EIO; | 
 | 		} | 
 | 	} | 
 | has_buffer: | 
 | 	iloc->bh = bh; | 
 | 	return 0; | 
 | } | 
 |  | 
 | int ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc) | 
 | { | 
 | 	/* We have all inode data except xattrs in memory here. */ | 
 | 	return __ext4_get_inode_loc(inode, iloc, | 
 | 		!(EXT4_I(inode)->i_state & EXT4_STATE_XATTR)); | 
 | } | 
 |  | 
 | void ext4_set_inode_flags(struct inode *inode) | 
 | { | 
 | 	unsigned int flags = EXT4_I(inode)->i_flags; | 
 |  | 
 | 	inode->i_flags &= ~(S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC); | 
 | 	if (flags & EXT4_SYNC_FL) | 
 | 		inode->i_flags |= S_SYNC; | 
 | 	if (flags & EXT4_APPEND_FL) | 
 | 		inode->i_flags |= S_APPEND; | 
 | 	if (flags & EXT4_IMMUTABLE_FL) | 
 | 		inode->i_flags |= S_IMMUTABLE; | 
 | 	if (flags & EXT4_NOATIME_FL) | 
 | 		inode->i_flags |= S_NOATIME; | 
 | 	if (flags & EXT4_DIRSYNC_FL) | 
 | 		inode->i_flags |= S_DIRSYNC; | 
 | } | 
 |  | 
 | /* Propagate flags from i_flags to EXT4_I(inode)->i_flags */ | 
 | void ext4_get_inode_flags(struct ext4_inode_info *ei) | 
 | { | 
 | 	unsigned int flags = ei->vfs_inode.i_flags; | 
 |  | 
 | 	ei->i_flags &= ~(EXT4_SYNC_FL|EXT4_APPEND_FL| | 
 | 			EXT4_IMMUTABLE_FL|EXT4_NOATIME_FL|EXT4_DIRSYNC_FL); | 
 | 	if (flags & S_SYNC) | 
 | 		ei->i_flags |= EXT4_SYNC_FL; | 
 | 	if (flags & S_APPEND) | 
 | 		ei->i_flags |= EXT4_APPEND_FL; | 
 | 	if (flags & S_IMMUTABLE) | 
 | 		ei->i_flags |= EXT4_IMMUTABLE_FL; | 
 | 	if (flags & S_NOATIME) | 
 | 		ei->i_flags |= EXT4_NOATIME_FL; | 
 | 	if (flags & S_DIRSYNC) | 
 | 		ei->i_flags |= EXT4_DIRSYNC_FL; | 
 | } | 
 |  | 
 | static blkcnt_t ext4_inode_blocks(struct ext4_inode *raw_inode, | 
 | 				  struct ext4_inode_info *ei) | 
 | { | 
 | 	blkcnt_t i_blocks ; | 
 | 	struct inode *inode = &(ei->vfs_inode); | 
 | 	struct super_block *sb = inode->i_sb; | 
 |  | 
 | 	if (EXT4_HAS_RO_COMPAT_FEATURE(sb, | 
 | 				EXT4_FEATURE_RO_COMPAT_HUGE_FILE)) { | 
 | 		/* we are using combined 48 bit field */ | 
 | 		i_blocks = ((u64)le16_to_cpu(raw_inode->i_blocks_high)) << 32 | | 
 | 					le32_to_cpu(raw_inode->i_blocks_lo); | 
 | 		if (ei->i_flags & EXT4_HUGE_FILE_FL) { | 
 | 			/* i_blocks represent file system block size */ | 
 | 			return i_blocks  << (inode->i_blkbits - 9); | 
 | 		} else { | 
 | 			return i_blocks; | 
 | 		} | 
 | 	} else { | 
 | 		return le32_to_cpu(raw_inode->i_blocks_lo); | 
 | 	} | 
 | } | 
 |  | 
 | struct inode *ext4_iget(struct super_block *sb, unsigned long ino) | 
 | { | 
 | 	struct ext4_iloc iloc; | 
 | 	struct ext4_inode *raw_inode; | 
 | 	struct ext4_inode_info *ei; | 
 | 	struct buffer_head *bh; | 
 | 	struct inode *inode; | 
 | 	long ret; | 
 | 	int block; | 
 |  | 
 | 	inode = iget_locked(sb, ino); | 
 | 	if (!inode) | 
 | 		return ERR_PTR(-ENOMEM); | 
 | 	if (!(inode->i_state & I_NEW)) | 
 | 		return inode; | 
 |  | 
 | 	ei = EXT4_I(inode); | 
 |  | 
 | 	ret = __ext4_get_inode_loc(inode, &iloc, 0); | 
 | 	if (ret < 0) | 
 | 		goto bad_inode; | 
 | 	bh = iloc.bh; | 
 | 	raw_inode = ext4_raw_inode(&iloc); | 
 | 	inode->i_mode = le16_to_cpu(raw_inode->i_mode); | 
 | 	inode->i_uid = (uid_t)le16_to_cpu(raw_inode->i_uid_low); | 
 | 	inode->i_gid = (gid_t)le16_to_cpu(raw_inode->i_gid_low); | 
 | 	if (!(test_opt(inode->i_sb, NO_UID32))) { | 
 | 		inode->i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16; | 
 | 		inode->i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16; | 
 | 	} | 
 | 	inode->i_nlink = le16_to_cpu(raw_inode->i_links_count); | 
 |  | 
 | 	ei->i_state = 0; | 
 | 	ei->i_dir_start_lookup = 0; | 
 | 	ei->i_dtime = le32_to_cpu(raw_inode->i_dtime); | 
 | 	/* We now have enough fields to check if the inode was active or not. | 
 | 	 * This is needed because nfsd might try to access dead inodes | 
 | 	 * the test is that same one that e2fsck uses | 
 | 	 * NeilBrown 1999oct15 | 
 | 	 */ | 
 | 	if (inode->i_nlink == 0) { | 
 | 		if (inode->i_mode == 0 || | 
 | 		    !(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_ORPHAN_FS)) { | 
 | 			/* this inode is deleted */ | 
 | 			brelse(bh); | 
 | 			ret = -ESTALE; | 
 | 			goto bad_inode; | 
 | 		} | 
 | 		/* The only unlinked inodes we let through here have | 
 | 		 * valid i_mode and are being read by the orphan | 
 | 		 * recovery code: that's fine, we're about to complete | 
 | 		 * the process of deleting those. */ | 
 | 	} | 
 | 	ei->i_flags = le32_to_cpu(raw_inode->i_flags); | 
 | 	inode->i_blocks = ext4_inode_blocks(raw_inode, ei); | 
 | 	ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo); | 
 | 	if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT)) | 
 | 		ei->i_file_acl |= | 
 | 			((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32; | 
 | 	inode->i_size = ext4_isize(raw_inode); | 
 | 	ei->i_disksize = inode->i_size; | 
 | 	inode->i_generation = le32_to_cpu(raw_inode->i_generation); | 
 | 	ei->i_block_group = iloc.block_group; | 
 | 	ei->i_last_alloc_group = ~0; | 
 | 	/* | 
 | 	 * NOTE! The in-memory inode i_data array is in little-endian order | 
 | 	 * even on big-endian machines: we do NOT byteswap the block numbers! | 
 | 	 */ | 
 | 	for (block = 0; block < EXT4_N_BLOCKS; block++) | 
 | 		ei->i_data[block] = raw_inode->i_block[block]; | 
 | 	INIT_LIST_HEAD(&ei->i_orphan); | 
 |  | 
 | 	if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) { | 
 | 		ei->i_extra_isize = le16_to_cpu(raw_inode->i_extra_isize); | 
 | 		if (EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize > | 
 | 		    EXT4_INODE_SIZE(inode->i_sb)) { | 
 | 			brelse(bh); | 
 | 			ret = -EIO; | 
 | 			goto bad_inode; | 
 | 		} | 
 | 		if (ei->i_extra_isize == 0) { | 
 | 			/* The extra space is currently unused. Use it. */ | 
 | 			ei->i_extra_isize = sizeof(struct ext4_inode) - | 
 | 					    EXT4_GOOD_OLD_INODE_SIZE; | 
 | 		} else { | 
 | 			__le32 *magic = (void *)raw_inode + | 
 | 					EXT4_GOOD_OLD_INODE_SIZE + | 
 | 					ei->i_extra_isize; | 
 | 			if (*magic == cpu_to_le32(EXT4_XATTR_MAGIC)) | 
 | 				ei->i_state |= EXT4_STATE_XATTR; | 
 | 		} | 
 | 	} else | 
 | 		ei->i_extra_isize = 0; | 
 |  | 
 | 	EXT4_INODE_GET_XTIME(i_ctime, inode, raw_inode); | 
 | 	EXT4_INODE_GET_XTIME(i_mtime, inode, raw_inode); | 
 | 	EXT4_INODE_GET_XTIME(i_atime, inode, raw_inode); | 
 | 	EXT4_EINODE_GET_XTIME(i_crtime, ei, raw_inode); | 
 |  | 
 | 	inode->i_version = le32_to_cpu(raw_inode->i_disk_version); | 
 | 	if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) { | 
 | 		if (EXT4_FITS_IN_INODE(raw_inode, ei, i_version_hi)) | 
 | 			inode->i_version |= | 
 | 			(__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32; | 
 | 	} | 
 |  | 
 | 	ret = 0; | 
 | 	if (ei->i_file_acl && | 
 | 	    ((ei->i_file_acl < | 
 | 	      (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) + | 
 | 	       EXT4_SB(sb)->s_gdb_count)) || | 
 | 	     (ei->i_file_acl >= ext4_blocks_count(EXT4_SB(sb)->s_es)))) { | 
 | 		ext4_error(sb, __func__, | 
 | 			   "bad extended attribute block %llu in inode #%lu", | 
 | 			   ei->i_file_acl, inode->i_ino); | 
 | 		ret = -EIO; | 
 | 		goto bad_inode; | 
 | 	} else if (ei->i_flags & EXT4_EXTENTS_FL) { | 
 | 		if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || | 
 | 		    (S_ISLNK(inode->i_mode) && | 
 | 		     !ext4_inode_is_fast_symlink(inode))) | 
 | 			/* Validate extent which is part of inode */ | 
 | 			ret = ext4_ext_check_inode(inode); | 
 | 	} else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || | 
 | 		   (S_ISLNK(inode->i_mode) && | 
 | 		    !ext4_inode_is_fast_symlink(inode))) { | 
 | 		/* Validate block references which are part of inode */ | 
 | 		ret = ext4_check_inode_blockref(inode); | 
 | 	} | 
 | 	if (ret) { | 
 | 		brelse(bh); | 
 | 		goto bad_inode; | 
 | 	} | 
 |  | 
 | 	if (S_ISREG(inode->i_mode)) { | 
 | 		inode->i_op = &ext4_file_inode_operations; | 
 | 		inode->i_fop = &ext4_file_operations; | 
 | 		ext4_set_aops(inode); | 
 | 	} else if (S_ISDIR(inode->i_mode)) { | 
 | 		inode->i_op = &ext4_dir_inode_operations; | 
 | 		inode->i_fop = &ext4_dir_operations; | 
 | 	} else if (S_ISLNK(inode->i_mode)) { | 
 | 		if (ext4_inode_is_fast_symlink(inode)) { | 
 | 			inode->i_op = &ext4_fast_symlink_inode_operations; | 
 | 			nd_terminate_link(ei->i_data, inode->i_size, | 
 | 				sizeof(ei->i_data) - 1); | 
 | 		} else { | 
 | 			inode->i_op = &ext4_symlink_inode_operations; | 
 | 			ext4_set_aops(inode); | 
 | 		} | 
 | 	} else if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode) || | 
 | 	      S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) { | 
 | 		inode->i_op = &ext4_special_inode_operations; | 
 | 		if (raw_inode->i_block[0]) | 
 | 			init_special_inode(inode, inode->i_mode, | 
 | 			   old_decode_dev(le32_to_cpu(raw_inode->i_block[0]))); | 
 | 		else | 
 | 			init_special_inode(inode, inode->i_mode, | 
 | 			   new_decode_dev(le32_to_cpu(raw_inode->i_block[1]))); | 
 | 	} else { | 
 | 		brelse(bh); | 
 | 		ret = -EIO; | 
 | 		ext4_error(inode->i_sb, __func__, | 
 | 			   "bogus i_mode (%o) for inode=%lu", | 
 | 			   inode->i_mode, inode->i_ino); | 
 | 		goto bad_inode; | 
 | 	} | 
 | 	brelse(iloc.bh); | 
 | 	ext4_set_inode_flags(inode); | 
 | 	unlock_new_inode(inode); | 
 | 	return inode; | 
 |  | 
 | bad_inode: | 
 | 	iget_failed(inode); | 
 | 	return ERR_PTR(ret); | 
 | } | 
 |  | 
 | static int ext4_inode_blocks_set(handle_t *handle, | 
 | 				struct ext4_inode *raw_inode, | 
 | 				struct ext4_inode_info *ei) | 
 | { | 
 | 	struct inode *inode = &(ei->vfs_inode); | 
 | 	u64 i_blocks = inode->i_blocks; | 
 | 	struct super_block *sb = inode->i_sb; | 
 |  | 
 | 	if (i_blocks <= ~0U) { | 
 | 		/* | 
 | 		 * i_blocks can be represnted in a 32 bit variable | 
 | 		 * as multiple of 512 bytes | 
 | 		 */ | 
 | 		raw_inode->i_blocks_lo   = cpu_to_le32(i_blocks); | 
 | 		raw_inode->i_blocks_high = 0; | 
 | 		ei->i_flags &= ~EXT4_HUGE_FILE_FL; | 
 | 		return 0; | 
 | 	} | 
 | 	if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_HUGE_FILE)) | 
 | 		return -EFBIG; | 
 |  | 
 | 	if (i_blocks <= 0xffffffffffffULL) { | 
 | 		/* | 
 | 		 * i_blocks can be represented in a 48 bit variable | 
 | 		 * as multiple of 512 bytes | 
 | 		 */ | 
 | 		raw_inode->i_blocks_lo   = cpu_to_le32(i_blocks); | 
 | 		raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32); | 
 | 		ei->i_flags &= ~EXT4_HUGE_FILE_FL; | 
 | 	} else { | 
 | 		ei->i_flags |= EXT4_HUGE_FILE_FL; | 
 | 		/* i_block is stored in file system block size */ | 
 | 		i_blocks = i_blocks >> (inode->i_blkbits - 9); | 
 | 		raw_inode->i_blocks_lo   = cpu_to_le32(i_blocks); | 
 | 		raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Post the struct inode info into an on-disk inode location in the | 
 |  * buffer-cache.  This gobbles the caller's reference to the | 
 |  * buffer_head in the inode location struct. | 
 |  * | 
 |  * The caller must have write access to iloc->bh. | 
 |  */ | 
 | static int ext4_do_update_inode(handle_t *handle, | 
 | 				struct inode *inode, | 
 | 				struct ext4_iloc *iloc) | 
 | { | 
 | 	struct ext4_inode *raw_inode = ext4_raw_inode(iloc); | 
 | 	struct ext4_inode_info *ei = EXT4_I(inode); | 
 | 	struct buffer_head *bh = iloc->bh; | 
 | 	int err = 0, rc, block; | 
 |  | 
 | 	/* For fields not not tracking in the in-memory inode, | 
 | 	 * initialise them to zero for new inodes. */ | 
 | 	if (ei->i_state & EXT4_STATE_NEW) | 
 | 		memset(raw_inode, 0, EXT4_SB(inode->i_sb)->s_inode_size); | 
 |  | 
 | 	ext4_get_inode_flags(ei); | 
 | 	raw_inode->i_mode = cpu_to_le16(inode->i_mode); | 
 | 	if (!(test_opt(inode->i_sb, NO_UID32))) { | 
 | 		raw_inode->i_uid_low = cpu_to_le16(low_16_bits(inode->i_uid)); | 
 | 		raw_inode->i_gid_low = cpu_to_le16(low_16_bits(inode->i_gid)); | 
 | /* | 
 |  * Fix up interoperability with old kernels. Otherwise, old inodes get | 
 |  * re-used with the upper 16 bits of the uid/gid intact | 
 |  */ | 
 | 		if (!ei->i_dtime) { | 
 | 			raw_inode->i_uid_high = | 
 | 				cpu_to_le16(high_16_bits(inode->i_uid)); | 
 | 			raw_inode->i_gid_high = | 
 | 				cpu_to_le16(high_16_bits(inode->i_gid)); | 
 | 		} else { | 
 | 			raw_inode->i_uid_high = 0; | 
 | 			raw_inode->i_gid_high = 0; | 
 | 		} | 
 | 	} else { | 
 | 		raw_inode->i_uid_low = | 
 | 			cpu_to_le16(fs_high2lowuid(inode->i_uid)); | 
 | 		raw_inode->i_gid_low = | 
 | 			cpu_to_le16(fs_high2lowgid(inode->i_gid)); | 
 | 		raw_inode->i_uid_high = 0; | 
 | 		raw_inode->i_gid_high = 0; | 
 | 	} | 
 | 	raw_inode->i_links_count = cpu_to_le16(inode->i_nlink); | 
 |  | 
 | 	EXT4_INODE_SET_XTIME(i_ctime, inode, raw_inode); | 
 | 	EXT4_INODE_SET_XTIME(i_mtime, inode, raw_inode); | 
 | 	EXT4_INODE_SET_XTIME(i_atime, inode, raw_inode); | 
 | 	EXT4_EINODE_SET_XTIME(i_crtime, ei, raw_inode); | 
 |  | 
 | 	if (ext4_inode_blocks_set(handle, raw_inode, ei)) | 
 | 		goto out_brelse; | 
 | 	raw_inode->i_dtime = cpu_to_le32(ei->i_dtime); | 
 | 	/* clear the migrate flag in the raw_inode */ | 
 | 	raw_inode->i_flags = cpu_to_le32(ei->i_flags & ~EXT4_EXT_MIGRATE); | 
 | 	if (EXT4_SB(inode->i_sb)->s_es->s_creator_os != | 
 | 	    cpu_to_le32(EXT4_OS_HURD)) | 
 | 		raw_inode->i_file_acl_high = | 
 | 			cpu_to_le16(ei->i_file_acl >> 32); | 
 | 	raw_inode->i_file_acl_lo = cpu_to_le32(ei->i_file_acl); | 
 | 	ext4_isize_set(raw_inode, ei->i_disksize); | 
 | 	if (ei->i_disksize > 0x7fffffffULL) { | 
 | 		struct super_block *sb = inode->i_sb; | 
 | 		if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, | 
 | 				EXT4_FEATURE_RO_COMPAT_LARGE_FILE) || | 
 | 				EXT4_SB(sb)->s_es->s_rev_level == | 
 | 				cpu_to_le32(EXT4_GOOD_OLD_REV)) { | 
 | 			/* If this is the first large file | 
 | 			 * created, add a flag to the superblock. | 
 | 			 */ | 
 | 			err = ext4_journal_get_write_access(handle, | 
 | 					EXT4_SB(sb)->s_sbh); | 
 | 			if (err) | 
 | 				goto out_brelse; | 
 | 			ext4_update_dynamic_rev(sb); | 
 | 			EXT4_SET_RO_COMPAT_FEATURE(sb, | 
 | 					EXT4_FEATURE_RO_COMPAT_LARGE_FILE); | 
 | 			sb->s_dirt = 1; | 
 | 			ext4_handle_sync(handle); | 
 | 			err = ext4_handle_dirty_metadata(handle, inode, | 
 | 					EXT4_SB(sb)->s_sbh); | 
 | 		} | 
 | 	} | 
 | 	raw_inode->i_generation = cpu_to_le32(inode->i_generation); | 
 | 	if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) { | 
 | 		if (old_valid_dev(inode->i_rdev)) { | 
 | 			raw_inode->i_block[0] = | 
 | 				cpu_to_le32(old_encode_dev(inode->i_rdev)); | 
 | 			raw_inode->i_block[1] = 0; | 
 | 		} else { | 
 | 			raw_inode->i_block[0] = 0; | 
 | 			raw_inode->i_block[1] = | 
 | 				cpu_to_le32(new_encode_dev(inode->i_rdev)); | 
 | 			raw_inode->i_block[2] = 0; | 
 | 		} | 
 | 	} else | 
 | 		for (block = 0; block < EXT4_N_BLOCKS; block++) | 
 | 			raw_inode->i_block[block] = ei->i_data[block]; | 
 |  | 
 | 	raw_inode->i_disk_version = cpu_to_le32(inode->i_version); | 
 | 	if (ei->i_extra_isize) { | 
 | 		if (EXT4_FITS_IN_INODE(raw_inode, ei, i_version_hi)) | 
 | 			raw_inode->i_version_hi = | 
 | 			cpu_to_le32(inode->i_version >> 32); | 
 | 		raw_inode->i_extra_isize = cpu_to_le16(ei->i_extra_isize); | 
 | 	} | 
 |  | 
 | 	BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | 
 | 	rc = ext4_handle_dirty_metadata(handle, inode, bh); | 
 | 	if (!err) | 
 | 		err = rc; | 
 | 	ei->i_state &= ~EXT4_STATE_NEW; | 
 |  | 
 | out_brelse: | 
 | 	brelse(bh); | 
 | 	ext4_std_error(inode->i_sb, err); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * ext4_write_inode() | 
 |  * | 
 |  * We are called from a few places: | 
 |  * | 
 |  * - Within generic_file_write() for O_SYNC files. | 
 |  *   Here, there will be no transaction running. We wait for any running | 
 |  *   trasnaction to commit. | 
 |  * | 
 |  * - Within sys_sync(), kupdate and such. | 
 |  *   We wait on commit, if tol to. | 
 |  * | 
 |  * - Within prune_icache() (PF_MEMALLOC == true) | 
 |  *   Here we simply return.  We can't afford to block kswapd on the | 
 |  *   journal commit. | 
 |  * | 
 |  * In all cases it is actually safe for us to return without doing anything, | 
 |  * because the inode has been copied into a raw inode buffer in | 
 |  * ext4_mark_inode_dirty().  This is a correctness thing for O_SYNC and for | 
 |  * knfsd. | 
 |  * | 
 |  * Note that we are absolutely dependent upon all inode dirtiers doing the | 
 |  * right thing: they *must* call mark_inode_dirty() after dirtying info in | 
 |  * which we are interested. | 
 |  * | 
 |  * It would be a bug for them to not do this.  The code: | 
 |  * | 
 |  *	mark_inode_dirty(inode) | 
 |  *	stuff(); | 
 |  *	inode->i_size = expr; | 
 |  * | 
 |  * is in error because a kswapd-driven write_inode() could occur while | 
 |  * `stuff()' is running, and the new i_size will be lost.  Plus the inode | 
 |  * will no longer be on the superblock's dirty inode list. | 
 |  */ | 
 | int ext4_write_inode(struct inode *inode, int wait) | 
 | { | 
 | 	if (current->flags & PF_MEMALLOC) | 
 | 		return 0; | 
 |  | 
 | 	if (ext4_journal_current_handle()) { | 
 | 		jbd_debug(1, "called recursively, non-PF_MEMALLOC!\n"); | 
 | 		dump_stack(); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	if (!wait) | 
 | 		return 0; | 
 |  | 
 | 	return ext4_force_commit(inode->i_sb); | 
 | } | 
 |  | 
 | /* | 
 |  * ext4_setattr() | 
 |  * | 
 |  * Called from notify_change. | 
 |  * | 
 |  * We want to trap VFS attempts to truncate the file as soon as | 
 |  * possible.  In particular, we want to make sure that when the VFS | 
 |  * shrinks i_size, we put the inode on the orphan list and modify | 
 |  * i_disksize immediately, so that during the subsequent flushing of | 
 |  * dirty pages and freeing of disk blocks, we can guarantee that any | 
 |  * commit will leave the blocks being flushed in an unused state on | 
 |  * disk.  (On recovery, the inode will get truncated and the blocks will | 
 |  * be freed, so we have a strong guarantee that no future commit will | 
 |  * leave these blocks visible to the user.) | 
 |  * | 
 |  * Another thing we have to assure is that if we are in ordered mode | 
 |  * and inode is still attached to the committing transaction, we must | 
 |  * we start writeout of all the dirty pages which are being truncated. | 
 |  * This way we are sure that all the data written in the previous | 
 |  * transaction are already on disk (truncate waits for pages under | 
 |  * writeback). | 
 |  * | 
 |  * Called with inode->i_mutex down. | 
 |  */ | 
 | int ext4_setattr(struct dentry *dentry, struct iattr *attr) | 
 | { | 
 | 	struct inode *inode = dentry->d_inode; | 
 | 	int error, rc = 0; | 
 | 	const unsigned int ia_valid = attr->ia_valid; | 
 |  | 
 | 	error = inode_change_ok(inode, attr); | 
 | 	if (error) | 
 | 		return error; | 
 |  | 
 | 	if ((ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) || | 
 | 		(ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) { | 
 | 		handle_t *handle; | 
 |  | 
 | 		/* (user+group)*(old+new) structure, inode write (sb, | 
 | 		 * inode block, ? - but truncate inode update has it) */ | 
 | 		handle = ext4_journal_start(inode, 2*(EXT4_QUOTA_INIT_BLOCKS(inode->i_sb)+ | 
 | 					EXT4_QUOTA_DEL_BLOCKS(inode->i_sb))+3); | 
 | 		if (IS_ERR(handle)) { | 
 | 			error = PTR_ERR(handle); | 
 | 			goto err_out; | 
 | 		} | 
 | 		error = vfs_dq_transfer(inode, attr) ? -EDQUOT : 0; | 
 | 		if (error) { | 
 | 			ext4_journal_stop(handle); | 
 | 			return error; | 
 | 		} | 
 | 		/* Update corresponding info in inode so that everything is in | 
 | 		 * one transaction */ | 
 | 		if (attr->ia_valid & ATTR_UID) | 
 | 			inode->i_uid = attr->ia_uid; | 
 | 		if (attr->ia_valid & ATTR_GID) | 
 | 			inode->i_gid = attr->ia_gid; | 
 | 		error = ext4_mark_inode_dirty(handle, inode); | 
 | 		ext4_journal_stop(handle); | 
 | 	} | 
 |  | 
 | 	if (attr->ia_valid & ATTR_SIZE) { | 
 | 		if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)) { | 
 | 			struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
 |  | 
 | 			if (attr->ia_size > sbi->s_bitmap_maxbytes) { | 
 | 				error = -EFBIG; | 
 | 				goto err_out; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (S_ISREG(inode->i_mode) && | 
 | 	    attr->ia_valid & ATTR_SIZE && attr->ia_size < inode->i_size) { | 
 | 		handle_t *handle; | 
 |  | 
 | 		handle = ext4_journal_start(inode, 3); | 
 | 		if (IS_ERR(handle)) { | 
 | 			error = PTR_ERR(handle); | 
 | 			goto err_out; | 
 | 		} | 
 |  | 
 | 		error = ext4_orphan_add(handle, inode); | 
 | 		EXT4_I(inode)->i_disksize = attr->ia_size; | 
 | 		rc = ext4_mark_inode_dirty(handle, inode); | 
 | 		if (!error) | 
 | 			error = rc; | 
 | 		ext4_journal_stop(handle); | 
 |  | 
 | 		if (ext4_should_order_data(inode)) { | 
 | 			error = ext4_begin_ordered_truncate(inode, | 
 | 							    attr->ia_size); | 
 | 			if (error) { | 
 | 				/* Do as much error cleanup as possible */ | 
 | 				handle = ext4_journal_start(inode, 3); | 
 | 				if (IS_ERR(handle)) { | 
 | 					ext4_orphan_del(NULL, inode); | 
 | 					goto err_out; | 
 | 				} | 
 | 				ext4_orphan_del(handle, inode); | 
 | 				ext4_journal_stop(handle); | 
 | 				goto err_out; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	rc = inode_setattr(inode, attr); | 
 |  | 
 | 	/* If inode_setattr's call to ext4_truncate failed to get a | 
 | 	 * transaction handle at all, we need to clean up the in-core | 
 | 	 * orphan list manually. */ | 
 | 	if (inode->i_nlink) | 
 | 		ext4_orphan_del(NULL, inode); | 
 |  | 
 | 	if (!rc && (ia_valid & ATTR_MODE)) | 
 | 		rc = ext4_acl_chmod(inode); | 
 |  | 
 | err_out: | 
 | 	ext4_std_error(inode->i_sb, error); | 
 | 	if (!error) | 
 | 		error = rc; | 
 | 	return error; | 
 | } | 
 |  | 
 | int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry, | 
 | 		 struct kstat *stat) | 
 | { | 
 | 	struct inode *inode; | 
 | 	unsigned long delalloc_blocks; | 
 |  | 
 | 	inode = dentry->d_inode; | 
 | 	generic_fillattr(inode, stat); | 
 |  | 
 | 	/* | 
 | 	 * We can't update i_blocks if the block allocation is delayed | 
 | 	 * otherwise in the case of system crash before the real block | 
 | 	 * allocation is done, we will have i_blocks inconsistent with | 
 | 	 * on-disk file blocks. | 
 | 	 * We always keep i_blocks updated together with real | 
 | 	 * allocation. But to not confuse with user, stat | 
 | 	 * will return the blocks that include the delayed allocation | 
 | 	 * blocks for this file. | 
 | 	 */ | 
 | 	spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | 
 | 	delalloc_blocks = EXT4_I(inode)->i_reserved_data_blocks; | 
 | 	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | 
 |  | 
 | 	stat->blocks += (delalloc_blocks << inode->i_sb->s_blocksize_bits)>>9; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks, | 
 | 				      int chunk) | 
 | { | 
 | 	int indirects; | 
 |  | 
 | 	/* if nrblocks are contiguous */ | 
 | 	if (chunk) { | 
 | 		/* | 
 | 		 * With N contiguous data blocks, it need at most | 
 | 		 * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) indirect blocks | 
 | 		 * 2 dindirect blocks | 
 | 		 * 1 tindirect block | 
 | 		 */ | 
 | 		indirects = nrblocks / EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
 | 		return indirects + 3; | 
 | 	} | 
 | 	/* | 
 | 	 * if nrblocks are not contiguous, worse case, each block touch | 
 | 	 * a indirect block, and each indirect block touch a double indirect | 
 | 	 * block, plus a triple indirect block | 
 | 	 */ | 
 | 	indirects = nrblocks * 2 + 1; | 
 | 	return indirects; | 
 | } | 
 |  | 
 | static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk) | 
 | { | 
 | 	if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)) | 
 | 		return ext4_indirect_trans_blocks(inode, nrblocks, chunk); | 
 | 	return ext4_ext_index_trans_blocks(inode, nrblocks, chunk); | 
 | } | 
 |  | 
 | /* | 
 |  * Account for index blocks, block groups bitmaps and block group | 
 |  * descriptor blocks if modify datablocks and index blocks | 
 |  * worse case, the indexs blocks spread over different block groups | 
 |  * | 
 |  * If datablocks are discontiguous, they are possible to spread over | 
 |  * different block groups too. If they are contiugous, with flexbg, | 
 |  * they could still across block group boundary. | 
 |  * | 
 |  * Also account for superblock, inode, quota and xattr blocks | 
 |  */ | 
 | int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk) | 
 | { | 
 | 	ext4_group_t groups, ngroups = ext4_get_groups_count(inode->i_sb); | 
 | 	int gdpblocks; | 
 | 	int idxblocks; | 
 | 	int ret = 0; | 
 |  | 
 | 	/* | 
 | 	 * How many index blocks need to touch to modify nrblocks? | 
 | 	 * The "Chunk" flag indicating whether the nrblocks is | 
 | 	 * physically contiguous on disk | 
 | 	 * | 
 | 	 * For Direct IO and fallocate, they calls get_block to allocate | 
 | 	 * one single extent at a time, so they could set the "Chunk" flag | 
 | 	 */ | 
 | 	idxblocks = ext4_index_trans_blocks(inode, nrblocks, chunk); | 
 |  | 
 | 	ret = idxblocks; | 
 |  | 
 | 	/* | 
 | 	 * Now let's see how many group bitmaps and group descriptors need | 
 | 	 * to account | 
 | 	 */ | 
 | 	groups = idxblocks; | 
 | 	if (chunk) | 
 | 		groups += 1; | 
 | 	else | 
 | 		groups += nrblocks; | 
 |  | 
 | 	gdpblocks = groups; | 
 | 	if (groups > ngroups) | 
 | 		groups = ngroups; | 
 | 	if (groups > EXT4_SB(inode->i_sb)->s_gdb_count) | 
 | 		gdpblocks = EXT4_SB(inode->i_sb)->s_gdb_count; | 
 |  | 
 | 	/* bitmaps and block group descriptor blocks */ | 
 | 	ret += groups + gdpblocks; | 
 |  | 
 | 	/* Blocks for super block, inode, quota and xattr blocks */ | 
 | 	ret += EXT4_META_TRANS_BLOCKS(inode->i_sb); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Calulate the total number of credits to reserve to fit | 
 |  * the modification of a single pages into a single transaction, | 
 |  * which may include multiple chunks of block allocations. | 
 |  * | 
 |  * This could be called via ext4_write_begin() | 
 |  * | 
 |  * We need to consider the worse case, when | 
 |  * one new block per extent. | 
 |  */ | 
 | int ext4_writepage_trans_blocks(struct inode *inode) | 
 | { | 
 | 	int bpp = ext4_journal_blocks_per_page(inode); | 
 | 	int ret; | 
 |  | 
 | 	ret = ext4_meta_trans_blocks(inode, bpp, 0); | 
 |  | 
 | 	/* Account for data blocks for journalled mode */ | 
 | 	if (ext4_should_journal_data(inode)) | 
 | 		ret += bpp; | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Calculate the journal credits for a chunk of data modification. | 
 |  * | 
 |  * This is called from DIO, fallocate or whoever calling | 
 |  * ext4_get_blocks() to map/allocate a chunk of contigous disk blocks. | 
 |  * | 
 |  * journal buffers for data blocks are not included here, as DIO | 
 |  * and fallocate do no need to journal data buffers. | 
 |  */ | 
 | int ext4_chunk_trans_blocks(struct inode *inode, int nrblocks) | 
 | { | 
 | 	return ext4_meta_trans_blocks(inode, nrblocks, 1); | 
 | } | 
 |  | 
 | /* | 
 |  * The caller must have previously called ext4_reserve_inode_write(). | 
 |  * Give this, we know that the caller already has write access to iloc->bh. | 
 |  */ | 
 | int ext4_mark_iloc_dirty(handle_t *handle, | 
 | 			 struct inode *inode, struct ext4_iloc *iloc) | 
 | { | 
 | 	int err = 0; | 
 |  | 
 | 	if (test_opt(inode->i_sb, I_VERSION)) | 
 | 		inode_inc_iversion(inode); | 
 |  | 
 | 	/* the do_update_inode consumes one bh->b_count */ | 
 | 	get_bh(iloc->bh); | 
 |  | 
 | 	/* ext4_do_update_inode() does jbd2_journal_dirty_metadata */ | 
 | 	err = ext4_do_update_inode(handle, inode, iloc); | 
 | 	put_bh(iloc->bh); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * On success, We end up with an outstanding reference count against | 
 |  * iloc->bh.  This _must_ be cleaned up later. | 
 |  */ | 
 |  | 
 | int | 
 | ext4_reserve_inode_write(handle_t *handle, struct inode *inode, | 
 | 			 struct ext4_iloc *iloc) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	err = ext4_get_inode_loc(inode, iloc); | 
 | 	if (!err) { | 
 | 		BUFFER_TRACE(iloc->bh, "get_write_access"); | 
 | 		err = ext4_journal_get_write_access(handle, iloc->bh); | 
 | 		if (err) { | 
 | 			brelse(iloc->bh); | 
 | 			iloc->bh = NULL; | 
 | 		} | 
 | 	} | 
 | 	ext4_std_error(inode->i_sb, err); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * Expand an inode by new_extra_isize bytes. | 
 |  * Returns 0 on success or negative error number on failure. | 
 |  */ | 
 | static int ext4_expand_extra_isize(struct inode *inode, | 
 | 				   unsigned int new_extra_isize, | 
 | 				   struct ext4_iloc iloc, | 
 | 				   handle_t *handle) | 
 | { | 
 | 	struct ext4_inode *raw_inode; | 
 | 	struct ext4_xattr_ibody_header *header; | 
 | 	struct ext4_xattr_entry *entry; | 
 |  | 
 | 	if (EXT4_I(inode)->i_extra_isize >= new_extra_isize) | 
 | 		return 0; | 
 |  | 
 | 	raw_inode = ext4_raw_inode(&iloc); | 
 |  | 
 | 	header = IHDR(inode, raw_inode); | 
 | 	entry = IFIRST(header); | 
 |  | 
 | 	/* No extended attributes present */ | 
 | 	if (!(EXT4_I(inode)->i_state & EXT4_STATE_XATTR) || | 
 | 		header->h_magic != cpu_to_le32(EXT4_XATTR_MAGIC)) { | 
 | 		memset((void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE, 0, | 
 | 			new_extra_isize); | 
 | 		EXT4_I(inode)->i_extra_isize = new_extra_isize; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* try to expand with EAs present */ | 
 | 	return ext4_expand_extra_isize_ea(inode, new_extra_isize, | 
 | 					  raw_inode, handle); | 
 | } | 
 |  | 
 | /* | 
 |  * What we do here is to mark the in-core inode as clean with respect to inode | 
 |  * dirtiness (it may still be data-dirty). | 
 |  * This means that the in-core inode may be reaped by prune_icache | 
 |  * without having to perform any I/O.  This is a very good thing, | 
 |  * because *any* task may call prune_icache - even ones which | 
 |  * have a transaction open against a different journal. | 
 |  * | 
 |  * Is this cheating?  Not really.  Sure, we haven't written the | 
 |  * inode out, but prune_icache isn't a user-visible syncing function. | 
 |  * Whenever the user wants stuff synced (sys_sync, sys_msync, sys_fsync) | 
 |  * we start and wait on commits. | 
 |  * | 
 |  * Is this efficient/effective?  Well, we're being nice to the system | 
 |  * by cleaning up our inodes proactively so they can be reaped | 
 |  * without I/O.  But we are potentially leaving up to five seconds' | 
 |  * worth of inodes floating about which prune_icache wants us to | 
 |  * write out.  One way to fix that would be to get prune_icache() | 
 |  * to do a write_super() to free up some memory.  It has the desired | 
 |  * effect. | 
 |  */ | 
 | int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode) | 
 | { | 
 | 	struct ext4_iloc iloc; | 
 | 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
 | 	static unsigned int mnt_count; | 
 | 	int err, ret; | 
 |  | 
 | 	might_sleep(); | 
 | 	err = ext4_reserve_inode_write(handle, inode, &iloc); | 
 | 	if (ext4_handle_valid(handle) && | 
 | 	    EXT4_I(inode)->i_extra_isize < sbi->s_want_extra_isize && | 
 | 	    !(EXT4_I(inode)->i_state & EXT4_STATE_NO_EXPAND)) { | 
 | 		/* | 
 | 		 * We need extra buffer credits since we may write into EA block | 
 | 		 * with this same handle. If journal_extend fails, then it will | 
 | 		 * only result in a minor loss of functionality for that inode. | 
 | 		 * If this is felt to be critical, then e2fsck should be run to | 
 | 		 * force a large enough s_min_extra_isize. | 
 | 		 */ | 
 | 		if ((jbd2_journal_extend(handle, | 
 | 			     EXT4_DATA_TRANS_BLOCKS(inode->i_sb))) == 0) { | 
 | 			ret = ext4_expand_extra_isize(inode, | 
 | 						      sbi->s_want_extra_isize, | 
 | 						      iloc, handle); | 
 | 			if (ret) { | 
 | 				EXT4_I(inode)->i_state |= EXT4_STATE_NO_EXPAND; | 
 | 				if (mnt_count != | 
 | 					le16_to_cpu(sbi->s_es->s_mnt_count)) { | 
 | 					ext4_warning(inode->i_sb, __func__, | 
 | 					"Unable to expand inode %lu. Delete" | 
 | 					" some EAs or run e2fsck.", | 
 | 					inode->i_ino); | 
 | 					mnt_count = | 
 | 					  le16_to_cpu(sbi->s_es->s_mnt_count); | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	if (!err) | 
 | 		err = ext4_mark_iloc_dirty(handle, inode, &iloc); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * ext4_dirty_inode() is called from __mark_inode_dirty() | 
 |  * | 
 |  * We're really interested in the case where a file is being extended. | 
 |  * i_size has been changed by generic_commit_write() and we thus need | 
 |  * to include the updated inode in the current transaction. | 
 |  * | 
 |  * Also, vfs_dq_alloc_block() will always dirty the inode when blocks | 
 |  * are allocated to the file. | 
 |  * | 
 |  * If the inode is marked synchronous, we don't honour that here - doing | 
 |  * so would cause a commit on atime updates, which we don't bother doing. | 
 |  * We handle synchronous inodes at the highest possible level. | 
 |  */ | 
 | void ext4_dirty_inode(struct inode *inode) | 
 | { | 
 | 	handle_t *current_handle = ext4_journal_current_handle(); | 
 | 	handle_t *handle; | 
 |  | 
 | 	if (!ext4_handle_valid(current_handle)) { | 
 | 		ext4_mark_inode_dirty(current_handle, inode); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	handle = ext4_journal_start(inode, 2); | 
 | 	if (IS_ERR(handle)) | 
 | 		goto out; | 
 | 	if (current_handle && | 
 | 		current_handle->h_transaction != handle->h_transaction) { | 
 | 		/* This task has a transaction open against a different fs */ | 
 | 		printk(KERN_EMERG "%s: transactions do not match!\n", | 
 | 		       __func__); | 
 | 	} else { | 
 | 		jbd_debug(5, "marking dirty.  outer handle=%p\n", | 
 | 				current_handle); | 
 | 		ext4_mark_inode_dirty(handle, inode); | 
 | 	} | 
 | 	ext4_journal_stop(handle); | 
 | out: | 
 | 	return; | 
 | } | 
 |  | 
 | #if 0 | 
 | /* | 
 |  * Bind an inode's backing buffer_head into this transaction, to prevent | 
 |  * it from being flushed to disk early.  Unlike | 
 |  * ext4_reserve_inode_write, this leaves behind no bh reference and | 
 |  * returns no iloc structure, so the caller needs to repeat the iloc | 
 |  * lookup to mark the inode dirty later. | 
 |  */ | 
 | static int ext4_pin_inode(handle_t *handle, struct inode *inode) | 
 | { | 
 | 	struct ext4_iloc iloc; | 
 |  | 
 | 	int err = 0; | 
 | 	if (handle) { | 
 | 		err = ext4_get_inode_loc(inode, &iloc); | 
 | 		if (!err) { | 
 | 			BUFFER_TRACE(iloc.bh, "get_write_access"); | 
 | 			err = jbd2_journal_get_write_access(handle, iloc.bh); | 
 | 			if (!err) | 
 | 				err = ext4_handle_dirty_metadata(handle, | 
 | 								 inode, | 
 | 								 iloc.bh); | 
 | 			brelse(iloc.bh); | 
 | 		} | 
 | 	} | 
 | 	ext4_std_error(inode->i_sb, err); | 
 | 	return err; | 
 | } | 
 | #endif | 
 |  | 
 | int ext4_change_inode_journal_flag(struct inode *inode, int val) | 
 | { | 
 | 	journal_t *journal; | 
 | 	handle_t *handle; | 
 | 	int err; | 
 |  | 
 | 	/* | 
 | 	 * We have to be very careful here: changing a data block's | 
 | 	 * journaling status dynamically is dangerous.  If we write a | 
 | 	 * data block to the journal, change the status and then delete | 
 | 	 * that block, we risk forgetting to revoke the old log record | 
 | 	 * from the journal and so a subsequent replay can corrupt data. | 
 | 	 * So, first we make sure that the journal is empty and that | 
 | 	 * nobody is changing anything. | 
 | 	 */ | 
 |  | 
 | 	journal = EXT4_JOURNAL(inode); | 
 | 	if (!journal) | 
 | 		return 0; | 
 | 	if (is_journal_aborted(journal)) | 
 | 		return -EROFS; | 
 |  | 
 | 	jbd2_journal_lock_updates(journal); | 
 | 	jbd2_journal_flush(journal); | 
 |  | 
 | 	/* | 
 | 	 * OK, there are no updates running now, and all cached data is | 
 | 	 * synced to disk.  We are now in a completely consistent state | 
 | 	 * which doesn't have anything in the journal, and we know that | 
 | 	 * no filesystem updates are running, so it is safe to modify | 
 | 	 * the inode's in-core data-journaling state flag now. | 
 | 	 */ | 
 |  | 
 | 	if (val) | 
 | 		EXT4_I(inode)->i_flags |= EXT4_JOURNAL_DATA_FL; | 
 | 	else | 
 | 		EXT4_I(inode)->i_flags &= ~EXT4_JOURNAL_DATA_FL; | 
 | 	ext4_set_aops(inode); | 
 |  | 
 | 	jbd2_journal_unlock_updates(journal); | 
 |  | 
 | 	/* Finally we can mark the inode as dirty. */ | 
 |  | 
 | 	handle = ext4_journal_start(inode, 1); | 
 | 	if (IS_ERR(handle)) | 
 | 		return PTR_ERR(handle); | 
 |  | 
 | 	err = ext4_mark_inode_dirty(handle, inode); | 
 | 	ext4_handle_sync(handle); | 
 | 	ext4_journal_stop(handle); | 
 | 	ext4_std_error(inode->i_sb, err); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int ext4_bh_unmapped(handle_t *handle, struct buffer_head *bh) | 
 | { | 
 | 	return !buffer_mapped(bh); | 
 | } | 
 |  | 
 | int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) | 
 | { | 
 | 	struct page *page = vmf->page; | 
 | 	loff_t size; | 
 | 	unsigned long len; | 
 | 	int ret = -EINVAL; | 
 | 	void *fsdata; | 
 | 	struct file *file = vma->vm_file; | 
 | 	struct inode *inode = file->f_path.dentry->d_inode; | 
 | 	struct address_space *mapping = inode->i_mapping; | 
 |  | 
 | 	/* | 
 | 	 * Get i_alloc_sem to stop truncates messing with the inode. We cannot | 
 | 	 * get i_mutex because we are already holding mmap_sem. | 
 | 	 */ | 
 | 	down_read(&inode->i_alloc_sem); | 
 | 	size = i_size_read(inode); | 
 | 	if (page->mapping != mapping || size <= page_offset(page) | 
 | 	    || !PageUptodate(page)) { | 
 | 		/* page got truncated from under us? */ | 
 | 		goto out_unlock; | 
 | 	} | 
 | 	ret = 0; | 
 | 	if (PageMappedToDisk(page)) | 
 | 		goto out_unlock; | 
 |  | 
 | 	if (page->index == size >> PAGE_CACHE_SHIFT) | 
 | 		len = size & ~PAGE_CACHE_MASK; | 
 | 	else | 
 | 		len = PAGE_CACHE_SIZE; | 
 |  | 
 | 	if (page_has_buffers(page)) { | 
 | 		/* return if we have all the buffers mapped */ | 
 | 		if (!walk_page_buffers(NULL, page_buffers(page), 0, len, NULL, | 
 | 				       ext4_bh_unmapped)) | 
 | 			goto out_unlock; | 
 | 	} | 
 | 	/* | 
 | 	 * OK, we need to fill the hole... Do write_begin write_end | 
 | 	 * to do block allocation/reservation.We are not holding | 
 | 	 * inode.i__mutex here. That allow * parallel write_begin, | 
 | 	 * write_end call. lock_page prevent this from happening | 
 | 	 * on the same page though | 
 | 	 */ | 
 | 	ret = mapping->a_ops->write_begin(file, mapping, page_offset(page), | 
 | 			len, AOP_FLAG_UNINTERRUPTIBLE, &page, &fsdata); | 
 | 	if (ret < 0) | 
 | 		goto out_unlock; | 
 | 	ret = mapping->a_ops->write_end(file, mapping, page_offset(page), | 
 | 			len, len, page, fsdata); | 
 | 	if (ret < 0) | 
 | 		goto out_unlock; | 
 | 	ret = 0; | 
 | out_unlock: | 
 | 	if (ret) | 
 | 		ret = VM_FAULT_SIGBUS; | 
 | 	up_read(&inode->i_alloc_sem); | 
 | 	return ret; | 
 | } |