|  | /* | 
|  | * sst25l.c | 
|  | * | 
|  | * Driver for SST25L SPI Flash chips | 
|  | * | 
|  | * Copyright © 2009 Bluewater Systems Ltd | 
|  | * Author: Andre Renaud <andre@bluewatersys.com> | 
|  | * Author: Ryan Mallon <ryan@bluewatersys.com> | 
|  | * | 
|  | * Based on m25p80.c | 
|  | * | 
|  | * This code is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/sched.h> | 
|  |  | 
|  | #include <linux/mtd/mtd.h> | 
|  | #include <linux/mtd/partitions.h> | 
|  |  | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/spi/flash.h> | 
|  |  | 
|  | /* Erases can take up to 3 seconds! */ | 
|  | #define MAX_READY_WAIT_JIFFIES	msecs_to_jiffies(3000) | 
|  |  | 
|  | #define SST25L_CMD_WRSR		0x01	/* Write status register */ | 
|  | #define SST25L_CMD_WRDI		0x04	/* Write disable */ | 
|  | #define SST25L_CMD_RDSR		0x05	/* Read status register */ | 
|  | #define SST25L_CMD_WREN		0x06	/* Write enable */ | 
|  | #define SST25L_CMD_READ		0x03	/* High speed read */ | 
|  |  | 
|  | #define SST25L_CMD_EWSR		0x50	/* Enable write status register */ | 
|  | #define SST25L_CMD_SECTOR_ERASE	0x20	/* Erase sector */ | 
|  | #define SST25L_CMD_READ_ID	0x90	/* Read device ID */ | 
|  | #define SST25L_CMD_AAI_PROGRAM	0xaf	/* Auto address increment */ | 
|  |  | 
|  | #define SST25L_STATUS_BUSY	(1 << 0)	/* Chip is busy */ | 
|  | #define SST25L_STATUS_WREN	(1 << 1)	/* Write enabled */ | 
|  | #define SST25L_STATUS_BP0	(1 << 2)	/* Block protection 0 */ | 
|  | #define SST25L_STATUS_BP1	(1 << 3)	/* Block protection 1 */ | 
|  |  | 
|  | struct sst25l_flash { | 
|  | struct spi_device	*spi; | 
|  | struct mutex		lock; | 
|  | struct mtd_info		mtd; | 
|  |  | 
|  | int 			partitioned; | 
|  | }; | 
|  |  | 
|  | struct flash_info { | 
|  | const char		*name; | 
|  | uint16_t		device_id; | 
|  | unsigned		page_size; | 
|  | unsigned		nr_pages; | 
|  | unsigned		erase_size; | 
|  | }; | 
|  |  | 
|  | #define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd) | 
|  |  | 
|  | static struct flash_info __initdata sst25l_flash_info[] = { | 
|  | {"sst25lf020a", 0xbf43, 256, 1024, 4096}, | 
|  | {"sst25lf040a",	0xbf44,	256, 2048, 4096}, | 
|  | }; | 
|  |  | 
|  | static int sst25l_status(struct sst25l_flash *flash, int *status) | 
|  | { | 
|  | struct spi_message m; | 
|  | struct spi_transfer t; | 
|  | unsigned char cmd_resp[2]; | 
|  | int err; | 
|  |  | 
|  | spi_message_init(&m); | 
|  | memset(&t, 0, sizeof(struct spi_transfer)); | 
|  |  | 
|  | cmd_resp[0] = SST25L_CMD_RDSR; | 
|  | cmd_resp[1] = 0xff; | 
|  | t.tx_buf = cmd_resp; | 
|  | t.rx_buf = cmd_resp; | 
|  | t.len = sizeof(cmd_resp); | 
|  | spi_message_add_tail(&t, &m); | 
|  | err = spi_sync(flash->spi, &m); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | *status = cmd_resp[1]; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sst25l_write_enable(struct sst25l_flash *flash, int enable) | 
|  | { | 
|  | unsigned char command[2]; | 
|  | int status, err; | 
|  |  | 
|  | command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI; | 
|  | err = spi_write(flash->spi, command, 1); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | command[0] = SST25L_CMD_EWSR; | 
|  | err = spi_write(flash->spi, command, 1); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | command[0] = SST25L_CMD_WRSR; | 
|  | command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1; | 
|  | err = spi_write(flash->spi, command, 2); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (enable) { | 
|  | err = sst25l_status(flash, &status); | 
|  | if (err) | 
|  | return err; | 
|  | if (!(status & SST25L_STATUS_WREN)) | 
|  | return -EROFS; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sst25l_wait_till_ready(struct sst25l_flash *flash) | 
|  | { | 
|  | unsigned long deadline; | 
|  | int status, err; | 
|  |  | 
|  | deadline = jiffies + MAX_READY_WAIT_JIFFIES; | 
|  | do { | 
|  | err = sst25l_status(flash, &status); | 
|  | if (err) | 
|  | return err; | 
|  | if (!(status & SST25L_STATUS_BUSY)) | 
|  | return 0; | 
|  |  | 
|  | cond_resched(); | 
|  | } while (!time_after_eq(jiffies, deadline)); | 
|  |  | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset) | 
|  | { | 
|  | unsigned char command[4]; | 
|  | int err; | 
|  |  | 
|  | err = sst25l_write_enable(flash, 1); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | command[0] = SST25L_CMD_SECTOR_ERASE; | 
|  | command[1] = offset >> 16; | 
|  | command[2] = offset >> 8; | 
|  | command[3] = offset; | 
|  | err = spi_write(flash->spi, command, 4); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = sst25l_wait_till_ready(flash); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return sst25l_write_enable(flash, 0); | 
|  | } | 
|  |  | 
|  | static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr) | 
|  | { | 
|  | struct sst25l_flash *flash = to_sst25l_flash(mtd); | 
|  | uint32_t addr, end; | 
|  | int err; | 
|  |  | 
|  | /* Sanity checks */ | 
|  | if (instr->addr + instr->len > flash->mtd.size) | 
|  | return -EINVAL; | 
|  |  | 
|  | if ((uint32_t)instr->len % mtd->erasesize) | 
|  | return -EINVAL; | 
|  |  | 
|  | if ((uint32_t)instr->addr % mtd->erasesize) | 
|  | return -EINVAL; | 
|  |  | 
|  | addr = instr->addr; | 
|  | end = addr + instr->len; | 
|  |  | 
|  | mutex_lock(&flash->lock); | 
|  |  | 
|  | err = sst25l_wait_till_ready(flash); | 
|  | if (err) { | 
|  | mutex_unlock(&flash->lock); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | while (addr < end) { | 
|  | err = sst25l_erase_sector(flash, addr); | 
|  | if (err) { | 
|  | mutex_unlock(&flash->lock); | 
|  | instr->state = MTD_ERASE_FAILED; | 
|  | dev_err(&flash->spi->dev, "Erase failed\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | addr += mtd->erasesize; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&flash->lock); | 
|  |  | 
|  | instr->state = MTD_ERASE_DONE; | 
|  | mtd_erase_callback(instr); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len, | 
|  | size_t *retlen, unsigned char *buf) | 
|  | { | 
|  | struct sst25l_flash *flash = to_sst25l_flash(mtd); | 
|  | struct spi_transfer transfer[2]; | 
|  | struct spi_message message; | 
|  | unsigned char command[4]; | 
|  | int ret; | 
|  |  | 
|  | /* Sanity checking */ | 
|  | if (len == 0) | 
|  | return 0; | 
|  |  | 
|  | if (from + len > flash->mtd.size) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (retlen) | 
|  | *retlen = 0; | 
|  |  | 
|  | spi_message_init(&message); | 
|  | memset(&transfer, 0, sizeof(transfer)); | 
|  |  | 
|  | command[0] = SST25L_CMD_READ; | 
|  | command[1] = from >> 16; | 
|  | command[2] = from >> 8; | 
|  | command[3] = from; | 
|  |  | 
|  | transfer[0].tx_buf = command; | 
|  | transfer[0].len = sizeof(command); | 
|  | spi_message_add_tail(&transfer[0], &message); | 
|  |  | 
|  | transfer[1].rx_buf = buf; | 
|  | transfer[1].len = len; | 
|  | spi_message_add_tail(&transfer[1], &message); | 
|  |  | 
|  | mutex_lock(&flash->lock); | 
|  |  | 
|  | /* Wait for previous write/erase to complete */ | 
|  | ret = sst25l_wait_till_ready(flash); | 
|  | if (ret) { | 
|  | mutex_unlock(&flash->lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | spi_sync(flash->spi, &message); | 
|  |  | 
|  | if (retlen && message.actual_length > sizeof(command)) | 
|  | *retlen += message.actual_length - sizeof(command); | 
|  |  | 
|  | mutex_unlock(&flash->lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len, | 
|  | size_t *retlen, const unsigned char *buf) | 
|  | { | 
|  | struct sst25l_flash *flash = to_sst25l_flash(mtd); | 
|  | int i, j, ret, bytes, copied = 0; | 
|  | unsigned char command[5]; | 
|  |  | 
|  | /* Sanity checks */ | 
|  | if (!len) | 
|  | return 0; | 
|  |  | 
|  | if (to + len > flash->mtd.size) | 
|  | return -EINVAL; | 
|  |  | 
|  | if ((uint32_t)to % mtd->writesize) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&flash->lock); | 
|  |  | 
|  | ret = sst25l_write_enable(flash, 1); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | for (i = 0; i < len; i += mtd->writesize) { | 
|  | ret = sst25l_wait_till_ready(flash); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | /* Write the first byte of the page */ | 
|  | command[0] = SST25L_CMD_AAI_PROGRAM; | 
|  | command[1] = (to + i) >> 16; | 
|  | command[2] = (to + i) >> 8; | 
|  | command[3] = (to + i); | 
|  | command[4] = buf[i]; | 
|  | ret = spi_write(flash->spi, command, 5); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  | copied++; | 
|  |  | 
|  | /* | 
|  | * Write the remaining bytes using auto address | 
|  | * increment mode | 
|  | */ | 
|  | bytes = min_t(uint32_t, mtd->writesize, len - i); | 
|  | for (j = 1; j < bytes; j++, copied++) { | 
|  | ret = sst25l_wait_till_ready(flash); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | command[1] = buf[i + j]; | 
|  | ret = spi_write(flash->spi, command, 2); | 
|  | if (ret) | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | ret = sst25l_write_enable(flash, 0); | 
|  |  | 
|  | if (retlen) | 
|  | *retlen = copied; | 
|  |  | 
|  | mutex_unlock(&flash->lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct flash_info *__devinit sst25l_match_device(struct spi_device *spi) | 
|  | { | 
|  | struct flash_info *flash_info = NULL; | 
|  | struct spi_message m; | 
|  | struct spi_transfer t; | 
|  | unsigned char cmd_resp[6]; | 
|  | int i, err; | 
|  | uint16_t id; | 
|  |  | 
|  | spi_message_init(&m); | 
|  | memset(&t, 0, sizeof(struct spi_transfer)); | 
|  |  | 
|  | cmd_resp[0] = SST25L_CMD_READ_ID; | 
|  | cmd_resp[1] = 0; | 
|  | cmd_resp[2] = 0; | 
|  | cmd_resp[3] = 0; | 
|  | cmd_resp[4] = 0xff; | 
|  | cmd_resp[5] = 0xff; | 
|  | t.tx_buf = cmd_resp; | 
|  | t.rx_buf = cmd_resp; | 
|  | t.len = sizeof(cmd_resp); | 
|  | spi_message_add_tail(&t, &m); | 
|  | err = spi_sync(spi, &m); | 
|  | if (err < 0) { | 
|  | dev_err(&spi->dev, "error reading device id\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | id = (cmd_resp[4] << 8) | cmd_resp[5]; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++) | 
|  | if (sst25l_flash_info[i].device_id == id) | 
|  | flash_info = &sst25l_flash_info[i]; | 
|  |  | 
|  | if (!flash_info) | 
|  | dev_err(&spi->dev, "unknown id %.4x\n", id); | 
|  |  | 
|  | return flash_info; | 
|  | } | 
|  |  | 
|  | static int __devinit sst25l_probe(struct spi_device *spi) | 
|  | { | 
|  | struct flash_info *flash_info; | 
|  | struct sst25l_flash *flash; | 
|  | struct flash_platform_data *data; | 
|  | int ret, i; | 
|  |  | 
|  | flash_info = sst25l_match_device(spi); | 
|  | if (!flash_info) | 
|  | return -ENODEV; | 
|  |  | 
|  | flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL); | 
|  | if (!flash) | 
|  | return -ENOMEM; | 
|  |  | 
|  | flash->spi = spi; | 
|  | mutex_init(&flash->lock); | 
|  | dev_set_drvdata(&spi->dev, flash); | 
|  |  | 
|  | data = spi->dev.platform_data; | 
|  | if (data && data->name) | 
|  | flash->mtd.name = data->name; | 
|  | else | 
|  | flash->mtd.name = dev_name(&spi->dev); | 
|  |  | 
|  | flash->mtd.type		= MTD_NORFLASH; | 
|  | flash->mtd.flags	= MTD_CAP_NORFLASH; | 
|  | flash->mtd.erasesize	= flash_info->erase_size; | 
|  | flash->mtd.writesize	= flash_info->page_size; | 
|  | flash->mtd.size		= flash_info->page_size * flash_info->nr_pages; | 
|  | flash->mtd.erase	= sst25l_erase; | 
|  | flash->mtd.read		= sst25l_read; | 
|  | flash->mtd.write 	= sst25l_write; | 
|  |  | 
|  | dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name, | 
|  | (long long)flash->mtd.size >> 10); | 
|  |  | 
|  | DEBUG(MTD_DEBUG_LEVEL2, | 
|  | "mtd .name = %s, .size = 0x%llx (%lldMiB) " | 
|  | ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", | 
|  | flash->mtd.name, | 
|  | (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20), | 
|  | flash->mtd.erasesize, flash->mtd.erasesize / 1024, | 
|  | flash->mtd.numeraseregions); | 
|  |  | 
|  | if (mtd_has_partitions()) { | 
|  | struct mtd_partition *parts = NULL; | 
|  | int nr_parts = 0; | 
|  |  | 
|  | if (mtd_has_cmdlinepart()) { | 
|  | static const char *part_probes[] = | 
|  | {"cmdlinepart", NULL}; | 
|  |  | 
|  | nr_parts = parse_mtd_partitions(&flash->mtd, | 
|  | part_probes, | 
|  | &parts, 0); | 
|  | } | 
|  |  | 
|  | if (nr_parts <= 0 && data && data->parts) { | 
|  | parts = data->parts; | 
|  | nr_parts = data->nr_parts; | 
|  | } | 
|  |  | 
|  | if (nr_parts > 0) { | 
|  | for (i = 0; i < nr_parts; i++) { | 
|  | DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " | 
|  | "{.name = %s, .offset = 0x%llx, " | 
|  | ".size = 0x%llx (%lldKiB) }\n", | 
|  | i, parts[i].name, | 
|  | (long long)parts[i].offset, | 
|  | (long long)parts[i].size, | 
|  | (long long)(parts[i].size >> 10)); | 
|  | } | 
|  |  | 
|  | flash->partitioned = 1; | 
|  | return add_mtd_partitions(&flash->mtd, | 
|  | parts, nr_parts); | 
|  | } | 
|  |  | 
|  | } else if (data && data->nr_parts) { | 
|  | dev_warn(&spi->dev, "ignoring %d default partitions on %s\n", | 
|  | data->nr_parts, data->name); | 
|  | } | 
|  |  | 
|  | ret = add_mtd_device(&flash->mtd); | 
|  | if (ret == 1) { | 
|  | kfree(flash); | 
|  | dev_set_drvdata(&spi->dev, NULL); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __exit sst25l_remove(struct spi_device *spi) | 
|  | { | 
|  | struct sst25l_flash *flash = dev_get_drvdata(&spi->dev); | 
|  | int ret; | 
|  |  | 
|  | if (mtd_has_partitions() && flash->partitioned) | 
|  | ret = del_mtd_partitions(&flash->mtd); | 
|  | else | 
|  | ret = del_mtd_device(&flash->mtd); | 
|  | if (ret == 0) | 
|  | kfree(flash); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct spi_driver sst25l_driver = { | 
|  | .driver = { | 
|  | .name	= "sst25l", | 
|  | .bus	= &spi_bus_type, | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | .probe		= sst25l_probe, | 
|  | .remove		= __exit_p(sst25l_remove), | 
|  | }; | 
|  |  | 
|  | static int __init sst25l_init(void) | 
|  | { | 
|  | return spi_register_driver(&sst25l_driver); | 
|  | } | 
|  |  | 
|  | static void __exit sst25l_exit(void) | 
|  | { | 
|  | spi_unregister_driver(&sst25l_driver); | 
|  | } | 
|  |  | 
|  | module_init(sst25l_init); | 
|  | module_exit(sst25l_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips"); | 
|  | MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, " | 
|  | "Ryan Mallon <ryan@bluewatersys.com>"); | 
|  | MODULE_LICENSE("GPL"); |