|  | /* | 
|  | * linux/kernel/irq/spurious.c | 
|  | * | 
|  | * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar | 
|  | * | 
|  | * This file contains spurious interrupt handling. | 
|  | */ | 
|  |  | 
|  | #include <linux/irq.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/kallsyms.h> | 
|  | #include <linux/interrupt.h> | 
|  |  | 
|  | static int irqfixup __read_mostly; | 
|  |  | 
|  | /* | 
|  | * Recovery handler for misrouted interrupts. | 
|  | */ | 
|  | static int misrouted_irq(int irq) | 
|  | { | 
|  | int i; | 
|  | int ok = 0; | 
|  | int work = 0;	/* Did we do work for a real IRQ */ | 
|  |  | 
|  | for (i = 1; i < NR_IRQS; i++) { | 
|  | struct irq_desc *desc = irq_desc + i; | 
|  | struct irqaction *action; | 
|  |  | 
|  | if (i == irq)	/* Already tried */ | 
|  | continue; | 
|  |  | 
|  | spin_lock(&desc->lock); | 
|  | /* Already running on another processor */ | 
|  | if (desc->status & IRQ_INPROGRESS) { | 
|  | /* | 
|  | * Already running: If it is shared get the other | 
|  | * CPU to go looking for our mystery interrupt too | 
|  | */ | 
|  | if (desc->action && (desc->action->flags & IRQF_SHARED)) | 
|  | desc->status |= IRQ_PENDING; | 
|  | spin_unlock(&desc->lock); | 
|  | continue; | 
|  | } | 
|  | /* Honour the normal IRQ locking */ | 
|  | desc->status |= IRQ_INPROGRESS; | 
|  | action = desc->action; | 
|  | spin_unlock(&desc->lock); | 
|  |  | 
|  | while (action) { | 
|  | /* Only shared IRQ handlers are safe to call */ | 
|  | if (action->flags & IRQF_SHARED) { | 
|  | if (action->handler(i, action->dev_id) == | 
|  | IRQ_HANDLED) | 
|  | ok = 1; | 
|  | } | 
|  | action = action->next; | 
|  | } | 
|  | local_irq_disable(); | 
|  | /* Now clean up the flags */ | 
|  | spin_lock(&desc->lock); | 
|  | action = desc->action; | 
|  |  | 
|  | /* | 
|  | * While we were looking for a fixup someone queued a real | 
|  | * IRQ clashing with our walk: | 
|  | */ | 
|  | while ((desc->status & IRQ_PENDING) && action) { | 
|  | /* | 
|  | * Perform real IRQ processing for the IRQ we deferred | 
|  | */ | 
|  | work = 1; | 
|  | spin_unlock(&desc->lock); | 
|  | handle_IRQ_event(i, action); | 
|  | spin_lock(&desc->lock); | 
|  | desc->status &= ~IRQ_PENDING; | 
|  | } | 
|  | desc->status &= ~IRQ_INPROGRESS; | 
|  | /* | 
|  | * If we did actual work for the real IRQ line we must let the | 
|  | * IRQ controller clean up too | 
|  | */ | 
|  | if (work && desc->chip && desc->chip->end) | 
|  | desc->chip->end(i); | 
|  | spin_unlock(&desc->lock); | 
|  | } | 
|  | /* So the caller can adjust the irq error counts */ | 
|  | return ok; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If 99,900 of the previous 100,000 interrupts have not been handled | 
|  | * then assume that the IRQ is stuck in some manner. Drop a diagnostic | 
|  | * and try to turn the IRQ off. | 
|  | * | 
|  | * (The other 100-of-100,000 interrupts may have been a correctly | 
|  | *  functioning device sharing an IRQ with the failing one) | 
|  | * | 
|  | * Called under desc->lock | 
|  | */ | 
|  |  | 
|  | static void | 
|  | __report_bad_irq(unsigned int irq, struct irq_desc *desc, | 
|  | irqreturn_t action_ret) | 
|  | { | 
|  | struct irqaction *action; | 
|  |  | 
|  | if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) { | 
|  | printk(KERN_ERR "irq event %d: bogus return value %x\n", | 
|  | irq, action_ret); | 
|  | } else { | 
|  | printk(KERN_ERR "irq %d: nobody cared (try booting with " | 
|  | "the \"irqpoll\" option)\n", irq); | 
|  | } | 
|  | dump_stack(); | 
|  | printk(KERN_ERR "handlers:\n"); | 
|  |  | 
|  | action = desc->action; | 
|  | while (action) { | 
|  | printk(KERN_ERR "[<%p>]", action->handler); | 
|  | print_symbol(" (%s)", | 
|  | (unsigned long)action->handler); | 
|  | printk("\n"); | 
|  | action = action->next; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | report_bad_irq(unsigned int irq, struct irq_desc *desc, irqreturn_t action_ret) | 
|  | { | 
|  | static int count = 100; | 
|  |  | 
|  | if (count > 0) { | 
|  | count--; | 
|  | __report_bad_irq(irq, desc, action_ret); | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline int try_misrouted_irq(unsigned int irq, struct irq_desc *desc, irqreturn_t action_ret) | 
|  | { | 
|  | struct irqaction *action; | 
|  |  | 
|  | if (!irqfixup) | 
|  | return 0; | 
|  |  | 
|  | /* We didn't actually handle the IRQ - see if it was misrouted? */ | 
|  | if (action_ret == IRQ_NONE) | 
|  | return 1; | 
|  |  | 
|  | /* | 
|  | * But for 'irqfixup == 2' we also do it for handled interrupts if | 
|  | * they are marked as IRQF_IRQPOLL (or for irq zero, which is the | 
|  | * traditional PC timer interrupt.. Legacy) | 
|  | */ | 
|  | if (irqfixup < 2) | 
|  | return 0; | 
|  |  | 
|  | if (!irq) | 
|  | return 1; | 
|  |  | 
|  | /* | 
|  | * Since we don't get the descriptor lock, "action" can | 
|  | * change under us.  We don't really care, but we don't | 
|  | * want to follow a NULL pointer. So tell the compiler to | 
|  | * just load it once by using a barrier. | 
|  | */ | 
|  | action = desc->action; | 
|  | barrier(); | 
|  | return action && (action->flags & IRQF_IRQPOLL); | 
|  | } | 
|  |  | 
|  | void note_interrupt(unsigned int irq, struct irq_desc *desc, | 
|  | irqreturn_t action_ret) | 
|  | { | 
|  | if (unlikely(action_ret != IRQ_HANDLED)) { | 
|  | /* | 
|  | * If we are seeing only the odd spurious IRQ caused by | 
|  | * bus asynchronicity then don't eventually trigger an error, | 
|  | * otherwise the couter becomes a doomsday timer for otherwise | 
|  | * working systems | 
|  | */ | 
|  | if (jiffies - desc->last_unhandled > HZ/10) | 
|  | desc->irqs_unhandled = 1; | 
|  | else | 
|  | desc->irqs_unhandled++; | 
|  | desc->last_unhandled = jiffies; | 
|  | if (unlikely(action_ret != IRQ_NONE)) | 
|  | report_bad_irq(irq, desc, action_ret); | 
|  | } | 
|  |  | 
|  | if (unlikely(try_misrouted_irq(irq, desc, action_ret))) { | 
|  | int ok = misrouted_irq(irq); | 
|  | if (action_ret == IRQ_NONE) | 
|  | desc->irqs_unhandled -= ok; | 
|  | } | 
|  |  | 
|  | desc->irq_count++; | 
|  | if (likely(desc->irq_count < 100000)) | 
|  | return; | 
|  |  | 
|  | desc->irq_count = 0; | 
|  | if (unlikely(desc->irqs_unhandled > 99900)) { | 
|  | /* | 
|  | * The interrupt is stuck | 
|  | */ | 
|  | __report_bad_irq(irq, desc, action_ret); | 
|  | /* | 
|  | * Now kill the IRQ | 
|  | */ | 
|  | printk(KERN_EMERG "Disabling IRQ #%d\n", irq); | 
|  | desc->status |= IRQ_DISABLED; | 
|  | desc->depth = 1; | 
|  | desc->chip->disable(irq); | 
|  | } | 
|  | desc->irqs_unhandled = 0; | 
|  | } | 
|  |  | 
|  | int noirqdebug __read_mostly; | 
|  |  | 
|  | int noirqdebug_setup(char *str) | 
|  | { | 
|  | noirqdebug = 1; | 
|  | printk(KERN_INFO "IRQ lockup detection disabled\n"); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | __setup("noirqdebug", noirqdebug_setup); | 
|  |  | 
|  | static int __init irqfixup_setup(char *str) | 
|  | { | 
|  | irqfixup = 1; | 
|  | printk(KERN_WARNING "Misrouted IRQ fixup support enabled.\n"); | 
|  | printk(KERN_WARNING "This may impact system performance.\n"); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | __setup("irqfixup", irqfixup_setup); | 
|  |  | 
|  | static int __init irqpoll_setup(char *str) | 
|  | { | 
|  | irqfixup = 2; | 
|  | printk(KERN_WARNING "Misrouted IRQ fixup and polling support " | 
|  | "enabled\n"); | 
|  | printk(KERN_WARNING "This may significantly impact system " | 
|  | "performance\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | __setup("irqpoll", irqpoll_setup); |