| /* | 
 |  * Copyright 2010 Tilera Corporation. All Rights Reserved. | 
 |  * | 
 |  *   This program is free software; you can redistribute it and/or | 
 |  *   modify it under the terms of the GNU General Public License | 
 |  *   as published by the Free Software Foundation, version 2. | 
 |  * | 
 |  *   This program is distributed in the hope that it will be useful, but | 
 |  *   WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | 
 |  *   NON INFRINGEMENT.  See the GNU General Public License for | 
 |  *   more details. | 
 |  */ | 
 |  | 
 | /* Adjust unistd.h to provide 32-bit numbers and functions. */ | 
 | #define __SYSCALL_COMPAT | 
 |  | 
 | #include <linux/compat.h> | 
 | #include <linux/msg.h> | 
 | #include <linux/syscalls.h> | 
 | #include <linux/kdev_t.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/fcntl.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/signal.h> | 
 | #include <asm/syscalls.h> | 
 |  | 
 | /* | 
 |  * Syscalls that take 64-bit numbers traditionally take them in 32-bit | 
 |  * "high" and "low" value parts on 32-bit architectures. | 
 |  * In principle, one could imagine passing some register arguments as | 
 |  * fully 64-bit on TILE-Gx in 32-bit mode, but it seems easier to | 
 |  * adapt the usual convention. | 
 |  */ | 
 |  | 
 | long compat_sys_truncate64(char __user *filename, u32 dummy, u32 low, u32 high) | 
 | { | 
 | 	return sys_truncate(filename, ((loff_t)high << 32) | low); | 
 | } | 
 |  | 
 | long compat_sys_ftruncate64(unsigned int fd, u32 dummy, u32 low, u32 high) | 
 | { | 
 | 	return sys_ftruncate(fd, ((loff_t)high << 32) | low); | 
 | } | 
 |  | 
 | long compat_sys_pread64(unsigned int fd, char __user *ubuf, size_t count, | 
 | 			u32 dummy, u32 low, u32 high) | 
 | { | 
 | 	return sys_pread64(fd, ubuf, count, ((loff_t)high << 32) | low); | 
 | } | 
 |  | 
 | long compat_sys_pwrite64(unsigned int fd, char __user *ubuf, size_t count, | 
 | 			 u32 dummy, u32 low, u32 high) | 
 | { | 
 | 	return sys_pwrite64(fd, ubuf, count, ((loff_t)high << 32) | low); | 
 | } | 
 |  | 
 | long compat_sys_lookup_dcookie(u32 low, u32 high, char __user *buf, size_t len) | 
 | { | 
 | 	return sys_lookup_dcookie(((loff_t)high << 32) | low, buf, len); | 
 | } | 
 |  | 
 | long compat_sys_sync_file_range2(int fd, unsigned int flags, | 
 | 				 u32 offset_lo, u32 offset_hi, | 
 | 				 u32 nbytes_lo, u32 nbytes_hi) | 
 | { | 
 | 	return sys_sync_file_range(fd, ((loff_t)offset_hi << 32) | offset_lo, | 
 | 				   ((loff_t)nbytes_hi << 32) | nbytes_lo, | 
 | 				   flags); | 
 | } | 
 |  | 
 | long compat_sys_fallocate(int fd, int mode, | 
 | 			  u32 offset_lo, u32 offset_hi, | 
 | 			  u32 len_lo, u32 len_hi) | 
 | { | 
 | 	return sys_fallocate(fd, mode, ((loff_t)offset_hi << 32) | offset_lo, | 
 | 			     ((loff_t)len_hi << 32) | len_lo); | 
 | } | 
 |  | 
 |  | 
 |  | 
 | long compat_sys_sched_rr_get_interval(compat_pid_t pid, | 
 | 				      struct compat_timespec __user *interval) | 
 | { | 
 | 	struct timespec t; | 
 | 	int ret; | 
 | 	mm_segment_t old_fs = get_fs(); | 
 |  | 
 | 	set_fs(KERNEL_DS); | 
 | 	ret = sys_sched_rr_get_interval(pid, | 
 | 					(struct timespec __force __user *)&t); | 
 | 	set_fs(old_fs); | 
 | 	if (put_compat_timespec(&t, interval)) | 
 | 		return -EFAULT; | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * The usual compat_sys_msgsnd() and _msgrcv() seem to be assuming | 
 |  * some different calling convention than our normal 32-bit tile code. | 
 |  */ | 
 |  | 
 | /* Already defined in ipc/compat.c, but we need it here. */ | 
 | struct compat_msgbuf { | 
 | 	compat_long_t mtype; | 
 | 	char mtext[1]; | 
 | }; | 
 |  | 
 | long tile_compat_sys_msgsnd(int msqid, | 
 | 			    struct compat_msgbuf __user *msgp, | 
 | 			    size_t msgsz, int msgflg) | 
 | { | 
 | 	compat_long_t mtype; | 
 |  | 
 | 	if (get_user(mtype, &msgp->mtype)) | 
 | 		return -EFAULT; | 
 | 	return do_msgsnd(msqid, mtype, msgp->mtext, msgsz, msgflg); | 
 | } | 
 |  | 
 | long tile_compat_sys_msgrcv(int msqid, | 
 | 			    struct compat_msgbuf __user *msgp, | 
 | 			    size_t msgsz, long msgtyp, int msgflg) | 
 | { | 
 | 	long err, mtype; | 
 |  | 
 | 	err =  do_msgrcv(msqid, &mtype, msgp->mtext, msgsz, msgtyp, msgflg); | 
 | 	if (err < 0) | 
 | 		goto out; | 
 |  | 
 | 	if (put_user(mtype, &msgp->mtype)) | 
 | 		err = -EFAULT; | 
 |  out: | 
 | 	return err; | 
 | } | 
 |  | 
 | /* Provide the compat syscall number to call mapping. */ | 
 | #undef __SYSCALL | 
 | #define __SYSCALL(nr, call) [nr] = (compat_##call), | 
 |  | 
 | /* The generic versions of these don't work for Tile. */ | 
 | #define compat_sys_msgrcv tile_compat_sys_msgrcv | 
 | #define compat_sys_msgsnd tile_compat_sys_msgsnd | 
 |  | 
 | /* See comments in sys.c */ | 
 | #define compat_sys_fadvise64 sys32_fadvise64 | 
 | #define compat_sys_fadvise64_64 sys32_fadvise64_64 | 
 | #define compat_sys_readahead sys32_readahead | 
 | #define compat_sys_sync_file_range compat_sys_sync_file_range2 | 
 |  | 
 | /* We leverage the "struct stat64" type for 32-bit time_t/nsec. */ | 
 | #define compat_sys_stat64 sys_stat64 | 
 | #define compat_sys_lstat64 sys_lstat64 | 
 | #define compat_sys_fstat64 sys_fstat64 | 
 | #define compat_sys_fstatat64 sys_fstatat64 | 
 |  | 
 | /* The native sys_ptrace dynamically handles compat binaries. */ | 
 | #define compat_sys_ptrace sys_ptrace | 
 |  | 
 | /* Call the trampolines to manage pt_regs where necessary. */ | 
 | #define compat_sys_execve _compat_sys_execve | 
 | #define compat_sys_sigaltstack _compat_sys_sigaltstack | 
 | #define compat_sys_rt_sigreturn _compat_sys_rt_sigreturn | 
 | #define sys_clone _sys_clone | 
 |  | 
 | /* | 
 |  * Note that we can't include <linux/unistd.h> here since the header | 
 |  * guard will defeat us; <asm/unistd.h> checks for __SYSCALL as well. | 
 |  */ | 
 | void *compat_sys_call_table[__NR_syscalls] = { | 
 | 	[0 ... __NR_syscalls-1] = sys_ni_syscall, | 
 | #include <asm/unistd.h> | 
 | }; |