[SCSI] lpfc 8.3.16: SLI Additions, updates, and code cleanup
- Remove unneeded Endian swap for Block Guard IOCB response
- Add a check for mailbox active before issuing the heartbeat command
- Correct heartbeat last_completion updates to avoid unneeded heartbeats
- Add Security crypto support to CONFIG_PORT mailbox command
- Add fips level and fips spec revision sysfs parameters
- Remove duplicate setting of ext_byte_len fields in lpfc_bsg_issue_mbox
- Switch call to memcpy_toio to __write32_copy to prevent unaligned 64 bit copy
- Change log message 0318 from an error to a warning as it is not an error
- Patch an incorrect call to lpfc_drain_txq on SLI-3 functions
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index e758eae..0ce9eb7 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1046,7 +1046,7 @@
} else
spin_unlock_irq(&phba->hbalock);
- lpfc_printf_log(phba, KERN_ERR,LOG_SLI,
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"0318 Failed to allocate IOTAG.last IOTAG is %d\n",
psli->last_iotag);
@@ -3914,7 +3914,8 @@
phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED |
LPFC_SLI3_HBQ_ENABLED |
LPFC_SLI3_CRP_ENABLED |
- LPFC_SLI3_BG_ENABLED);
+ LPFC_SLI3_BG_ENABLED |
+ LPFC_SLI3_DSS_ENABLED);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0442 Adapter failed to init, mbxCmd x%x "
@@ -3949,8 +3950,23 @@
} else
phba->max_vpi = 0;
- if (pmb->u.mb.un.varCfgPort.gdss)
+ phba->fips_level = 0;
+ phba->fips_spec_rev = 0;
+ if (pmb->u.mb.un.varCfgPort.gdss) {
phba->sli3_options |= LPFC_SLI3_DSS_ENABLED;
+ phba->fips_level = pmb->u.mb.un.varCfgPort.fips_level;
+ phba->fips_spec_rev = pmb->u.mb.un.varCfgPort.fips_rev;
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2850 Security Crypto Active. FIPS x%d "
+ "(Spec Rev: x%d)",
+ phba->fips_level, phba->fips_spec_rev);
+ }
+ if (pmb->u.mb.un.varCfgPort.sec_err) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2856 Config Port Security Crypto "
+ "Error: x%x ",
+ pmb->u.mb.un.varCfgPort.sec_err);
+ }
if (pmb->u.mb.un.varCfgPort.gerbm)
phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
if (pmb->u.mb.un.varCfgPort.gcrp)
@@ -9040,6 +9056,7 @@
switch (bf_get(lpfc_cqe_code, &cqevt)) {
case CQE_CODE_COMPL_WQE:
/* Process the WQ/RQ complete event */
+ phba->last_completion_time = jiffies;
workposted = lpfc_sli4_sp_handle_els_wcqe(phba,
(struct lpfc_wcqe_complete *)&cqevt);
break;
@@ -9050,11 +9067,13 @@
break;
case CQE_CODE_XRI_ABORTED:
/* Process the WQ XRI abort event */
+ phba->last_completion_time = jiffies;
workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
(struct sli4_wcqe_xri_aborted *)&cqevt);
break;
case CQE_CODE_RECEIVE:
/* Process the RQ event */
+ phba->last_completion_time = jiffies;
workposted = lpfc_sli4_sp_handle_rcqe(phba,
(struct lpfc_rcqe *)&cqevt);
break;
@@ -9276,7 +9295,6 @@
{
struct lpfc_wcqe_release wcqe;
bool workposted = false;
- unsigned long iflag;
/* Copy the work queue CQE and convert endian order if needed */
lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
@@ -9285,9 +9303,7 @@
switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
case CQE_CODE_COMPL_WQE:
/* Process the WQ complete event */
- spin_lock_irqsave(&phba->hbalock, iflag);
phba->last_completion_time = jiffies;
- spin_unlock_irqrestore(&phba->hbalock, iflag);
lpfc_sli4_fp_handle_fcp_wcqe(phba,
(struct lpfc_wcqe_complete *)&wcqe);
break;
@@ -9298,6 +9314,7 @@
break;
case CQE_CODE_XRI_ABORTED:
/* Process the WQ XRI abort event */
+ phba->last_completion_time = jiffies;
workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
(struct sli4_wcqe_xri_aborted *)&wcqe);
break;