cxgb4vf: Add main T4 PCI-E SR-IOV Virtual Function driver for cxgb4vf
Add main T4 PCI-E SR-IOV Virtual Function driver for "cxgb4vf".
Signed-off-by: Casey Leedom
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/cxgb4vf/adapter.h b/drivers/net/cxgb4vf/adapter.h
new file mode 100644
index 0000000..8ea0196
--- /dev/null
+++ b/drivers/net/cxgb4vf/adapter.h
@@ -0,0 +1,540 @@
+/*
+ * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
+ * driver for Linux.
+ *
+ * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This file should not be included directly. Include t4vf_common.h instead.
+ */
+
+#ifndef __CXGB4VF_ADAPTER_H__
+#define __CXGB4VF_ADAPTER_H__
+
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+
+#include "../cxgb4/t4_hw.h"
+
+/*
+ * Constants of the implementation.
+ */
+enum {
+ MAX_NPORTS = 1, /* max # of "ports" */
+ MAX_PORT_QSETS = 8, /* max # of Queue Sets / "port" */
+ MAX_ETH_QSETS = MAX_NPORTS*MAX_PORT_QSETS,
+
+ /*
+ * MSI-X interrupt index usage.
+ */
+ MSIX_FW = 0, /* MSI-X index for firmware Q */
+ MSIX_NIQFLINT = 1, /* MSI-X index base for Ingress Qs */
+ MSIX_EXTRAS = 1,
+ MSIX_ENTRIES = MAX_ETH_QSETS + MSIX_EXTRAS,
+
+ /*
+ * The maximum number of Ingress and Egress Queues is determined by
+ * the maximum number of "Queue Sets" which we support plus any
+ * ancillary queues. Each "Queue Set" requires one Ingress Queue
+ * for RX Packet Ingress Event notifications and two Egress Queues for
+ * a Free List and an Ethernet TX list.
+ */
+ INGQ_EXTRAS = 2, /* firmware event queue and */
+ /* forwarded interrupts */
+ MAX_INGQ = MAX_ETH_QSETS+INGQ_EXTRAS,
+ MAX_EGRQ = MAX_ETH_QSETS*2,
+};
+
+/*
+ * Forward structure definition references.
+ */
+struct adapter;
+struct sge_eth_rxq;
+struct sge_rspq;
+
+/*
+ * Per-"port" information. This is really per-Virtual Interface information
+ * but the use of the "port" nomanclature makes it easier to go back and forth
+ * between the PF and VF drivers ...
+ */
+struct port_info {
+ struct adapter *adapter; /* our adapter */
+ struct vlan_group *vlan_grp; /* out VLAN group */
+ u16 viid; /* virtual interface ID */
+ s16 xact_addr_filt; /* index of our MAC address filter */
+ u16 rss_size; /* size of VI's RSS table slice */
+ u8 pidx; /* index into adapter port[] */
+ u8 port_id; /* physical port ID */
+ u8 rx_offload; /* CSO, etc. */
+ u8 nqsets; /* # of "Queue Sets" */
+ u8 first_qset; /* index of first "Queue Set" */
+ struct link_config link_cfg; /* physical port configuration */
+};
+
+/* port_info.rx_offload flags */
+enum {
+ RX_CSO = 1 << 0,
+};
+
+/*
+ * Scatter Gather Engine resources for the "adapter". Our ingress and egress
+ * queues are organized into "Queue Sets" with one ingress and one egress
+ * queue per Queue Set. These Queue Sets are aportionable between the "ports"
+ * (Virtual Interfaces). One extra ingress queue is used to receive
+ * asynchronous messages from the firmware. Note that the "Queue IDs" that we
+ * use here are really "Relative Queue IDs" which are returned as part of the
+ * firmware command to allocate queues. These queue IDs are relative to the
+ * absolute Queue ID base of the section of the Queue ID space allocated to
+ * the PF/VF.
+ */
+
+/*
+ * SGE free-list queue state.
+ */
+struct rx_sw_desc;
+struct sge_fl {
+ unsigned int avail; /* # of available RX buffers */
+ unsigned int pend_cred; /* new buffers since last FL DB ring */
+ unsigned int cidx; /* consumer index */
+ unsigned int pidx; /* producer index */
+ unsigned long alloc_failed; /* # of buffer allocation failures */
+ unsigned long large_alloc_failed;
+ unsigned long starving; /* # of times FL was found starving */
+
+ /*
+ * Write-once/infrequently fields.
+ * -------------------------------
+ */
+
+ unsigned int cntxt_id; /* SGE relative QID for the free list */
+ unsigned int abs_id; /* SGE absolute QID for the free list */
+ unsigned int size; /* capacity of free list */
+ struct rx_sw_desc *sdesc; /* address of SW RX descriptor ring */
+ __be64 *desc; /* address of HW RX descriptor ring */
+ dma_addr_t addr; /* PCI bus address of hardware ring */
+};
+
+/*
+ * An ingress packet gather list.
+ */
+struct pkt_gl {
+ skb_frag_t frags[MAX_SKB_FRAGS];
+ void *va; /* virtual address of first byte */
+ unsigned int nfrags; /* # of fragments */
+ unsigned int tot_len; /* total length of fragments */
+};
+
+typedef int (*rspq_handler_t)(struct sge_rspq *, const __be64 *,
+ const struct pkt_gl *);
+
+/*
+ * State for an SGE Response Queue.
+ */
+struct sge_rspq {
+ struct napi_struct napi; /* NAPI scheduling control */
+ const __be64 *cur_desc; /* current descriptor in queue */
+ unsigned int cidx; /* consumer index */
+ u8 gen; /* current generation bit */
+ u8 next_intr_params; /* holdoff params for next interrupt */
+ int offset; /* offset into current FL buffer */
+
+ unsigned int unhandled_irqs; /* bogus interrupts */
+
+ /*
+ * Write-once/infrequently fields.
+ * -------------------------------
+ */
+
+ u8 intr_params; /* interrupt holdoff parameters */
+ u8 pktcnt_idx; /* interrupt packet threshold */
+ u8 idx; /* queue index within its group */
+ u16 cntxt_id; /* SGE rel QID for the response Q */
+ u16 abs_id; /* SGE abs QID for the response Q */
+ __be64 *desc; /* address of hardware response ring */
+ dma_addr_t phys_addr; /* PCI bus address of ring */
+ unsigned int iqe_len; /* entry size */
+ unsigned int size; /* capcity of response Q */
+ struct adapter *adapter; /* our adapter */
+ struct net_device *netdev; /* associated net device */
+ rspq_handler_t handler; /* the handler for this response Q */
+};
+
+/*
+ * Ethernet queue statistics
+ */
+struct sge_eth_stats {
+ unsigned long pkts; /* # of ethernet packets */
+ unsigned long lro_pkts; /* # of LRO super packets */
+ unsigned long lro_merged; /* # of wire packets merged by LRO */
+ unsigned long rx_cso; /* # of Rx checksum offloads */
+ unsigned long vlan_ex; /* # of Rx VLAN extractions */
+ unsigned long rx_drops; /* # of packets dropped due to no mem */
+};
+
+/*
+ * State for an Ethernet Receive Queue.
+ */
+struct sge_eth_rxq {
+ struct sge_rspq rspq; /* Response Queue */
+ struct sge_fl fl; /* Free List */
+ struct sge_eth_stats stats; /* receive statistics */
+};
+
+/*
+ * SGE Transmit Queue state. This contains all of the resources associated
+ * with the hardware status of a TX Queue which is a circular ring of hardware
+ * TX Descriptors. For convenience, it also contains a pointer to a parallel
+ * "Software Descriptor" array but we don't know anything about it here other
+ * than its type name.
+ */
+struct tx_desc {
+ /*
+ * Egress Queues are measured in units of SGE_EQ_IDXSIZE by the
+ * hardware: Sizes, Producer and Consumer indices, etc.
+ */
+ __be64 flit[SGE_EQ_IDXSIZE/sizeof(__be64)];
+};
+struct tx_sw_desc;
+struct sge_txq {
+ unsigned int in_use; /* # of in-use TX descriptors */
+ unsigned int size; /* # of descriptors */
+ unsigned int cidx; /* SW consumer index */
+ unsigned int pidx; /* producer index */
+ unsigned long stops; /* # of times queue has been stopped */
+ unsigned long restarts; /* # of queue restarts */
+
+ /*
+ * Write-once/infrequently fields.
+ * -------------------------------
+ */
+
+ unsigned int cntxt_id; /* SGE relative QID for the TX Q */
+ unsigned int abs_id; /* SGE absolute QID for the TX Q */
+ struct tx_desc *desc; /* address of HW TX descriptor ring */
+ struct tx_sw_desc *sdesc; /* address of SW TX descriptor ring */
+ struct sge_qstat *stat; /* queue status entry */
+ dma_addr_t phys_addr; /* PCI bus address of hardware ring */
+};
+
+/*
+ * State for an Ethernet Transmit Queue.
+ */
+struct sge_eth_txq {
+ struct sge_txq q; /* SGE TX Queue */
+ struct netdev_queue *txq; /* associated netdev TX queue */
+ unsigned long tso; /* # of TSO requests */
+ unsigned long tx_cso; /* # of TX checksum offloads */
+ unsigned long vlan_ins; /* # of TX VLAN insertions */
+ unsigned long mapping_err; /* # of I/O MMU packet mapping errors */
+};
+
+/*
+ * The complete set of Scatter/Gather Engine resources.
+ */
+struct sge {
+ /*
+ * Our "Queue Sets" ...
+ */
+ struct sge_eth_txq ethtxq[MAX_ETH_QSETS];
+ struct sge_eth_rxq ethrxq[MAX_ETH_QSETS];
+
+ /*
+ * Extra ingress queues for asynchronous firmware events and
+ * forwarded interrupts (when in MSI mode).
+ */
+ struct sge_rspq fw_evtq ____cacheline_aligned_in_smp;
+
+ struct sge_rspq intrq ____cacheline_aligned_in_smp;
+ spinlock_t intrq_lock;
+
+ /*
+ * State for managing "starving Free Lists" -- Free Lists which have
+ * fallen below a certain threshold of buffers available to the
+ * hardware and attempts to refill them up to that threshold have
+ * failed. We have a regular "slow tick" timer process which will
+ * make periodic attempts to refill these starving Free Lists ...
+ */
+ DECLARE_BITMAP(starving_fl, MAX_EGRQ);
+ struct timer_list rx_timer;
+
+ /*
+ * State for cleaning up completed TX descriptors.
+ */
+ struct timer_list tx_timer;
+
+ /*
+ * Write-once/infrequently fields.
+ * -------------------------------
+ */
+
+ u16 max_ethqsets; /* # of available Ethernet queue sets */
+ u16 ethqsets; /* # of active Ethernet queue sets */
+ u16 ethtxq_rover; /* Tx queue to clean up next */
+ u16 timer_val[SGE_NTIMERS]; /* interrupt holdoff timer array */
+ u8 counter_val[SGE_NCOUNTERS]; /* interrupt RX threshold array */
+
+ /*
+ * Reverse maps from Absolute Queue IDs to associated queue pointers.
+ * The absolute Queue IDs are in a compact range which start at a
+ * [potentially large] Base Queue ID. We perform the reverse map by
+ * first converting the Absolute Queue ID into a Relative Queue ID by
+ * subtracting off the Base Queue ID and then use a Relative Queue ID
+ * indexed table to get the pointer to the corresponding software
+ * queue structure.
+ */
+ unsigned int egr_base;
+ unsigned int ingr_base;
+ void *egr_map[MAX_EGRQ];
+ struct sge_rspq *ingr_map[MAX_INGQ];
+};
+
+/*
+ * Utility macros to convert Absolute- to Relative-Queue indices and Egress-
+ * and Ingress-Queues. The EQ_MAP() and IQ_MAP() macros which provide
+ * pointers to Ingress- and Egress-Queues can be used as both L- and R-values
+ */
+#define EQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->egr_base))
+#define IQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->ingr_base))
+
+#define EQ_MAP(s, abs_id) ((s)->egr_map[EQ_IDX(s, abs_id)])
+#define IQ_MAP(s, abs_id) ((s)->ingr_map[IQ_IDX(s, abs_id)])
+
+/*
+ * Macro to iterate across Queue Sets ("rxq" is a historic misnomer).
+ */
+#define for_each_ethrxq(sge, iter) \
+ for (iter = 0; iter < (sge)->ethqsets; iter++)
+
+/*
+ * Per-"adapter" (Virtual Function) information.
+ */
+struct adapter {
+ /* PCI resources */
+ void __iomem *regs;
+ struct pci_dev *pdev;
+ struct device *pdev_dev;
+
+ /* "adapter" resources */
+ unsigned long registered_device_map;
+ unsigned long open_device_map;
+ unsigned long flags;
+ struct adapter_params params;
+
+ /* queue and interrupt resources */
+ struct {
+ unsigned short vec;
+ char desc[22];
+ } msix_info[MSIX_ENTRIES];
+ struct sge sge;
+
+ /* Linux network device resources */
+ struct net_device *port[MAX_NPORTS];
+ const char *name;
+ unsigned int msg_enable;
+
+ /* debugfs resources */
+ struct dentry *debugfs_root;
+
+ /* various locks */
+ spinlock_t stats_lock;
+};
+
+enum { /* adapter flags */
+ FULL_INIT_DONE = (1UL << 0),
+ USING_MSI = (1UL << 1),
+ USING_MSIX = (1UL << 2),
+ QUEUES_BOUND = (1UL << 3),
+};
+
+/*
+ * The following register read/write routine definitions are required by
+ * the common code.
+ */
+
+/**
+ * t4_read_reg - read a HW register
+ * @adapter: the adapter
+ * @reg_addr: the register address
+ *
+ * Returns the 32-bit value of the given HW register.
+ */
+static inline u32 t4_read_reg(struct adapter *adapter, u32 reg_addr)
+{
+ return readl(adapter->regs + reg_addr);
+}
+
+/**
+ * t4_write_reg - write a HW register
+ * @adapter: the adapter
+ * @reg_addr: the register address
+ * @val: the value to write
+ *
+ * Write a 32-bit value into the given HW register.
+ */
+static inline void t4_write_reg(struct adapter *adapter, u32 reg_addr, u32 val)
+{
+ writel(val, adapter->regs + reg_addr);
+}
+
+#ifndef readq
+static inline u64 readq(const volatile void __iomem *addr)
+{
+ return readl(addr) + ((u64)readl(addr + 4) << 32);
+}
+
+static inline void writeq(u64 val, volatile void __iomem *addr)
+{
+ writel(val, addr);
+ writel(val >> 32, addr + 4);
+}
+#endif
+
+/**
+ * t4_read_reg64 - read a 64-bit HW register
+ * @adapter: the adapter
+ * @reg_addr: the register address
+ *
+ * Returns the 64-bit value of the given HW register.
+ */
+static inline u64 t4_read_reg64(struct adapter *adapter, u32 reg_addr)
+{
+ return readq(adapter->regs + reg_addr);
+}
+
+/**
+ * t4_write_reg64 - write a 64-bit HW register
+ * @adapter: the adapter
+ * @reg_addr: the register address
+ * @val: the value to write
+ *
+ * Write a 64-bit value into the given HW register.
+ */
+static inline void t4_write_reg64(struct adapter *adapter, u32 reg_addr,
+ u64 val)
+{
+ writeq(val, adapter->regs + reg_addr);
+}
+
+/**
+ * port_name - return the string name of a port
+ * @adapter: the adapter
+ * @pidx: the port index
+ *
+ * Return the string name of the selected port.
+ */
+static inline const char *port_name(struct adapter *adapter, int pidx)
+{
+ return adapter->port[pidx]->name;
+}
+
+/**
+ * t4_os_set_hw_addr - store a port's MAC address in SW
+ * @adapter: the adapter
+ * @pidx: the port index
+ * @hw_addr: the Ethernet address
+ *
+ * Store the Ethernet address of the given port in SW. Called by the common
+ * code when it retrieves a port's Ethernet address from EEPROM.
+ */
+static inline void t4_os_set_hw_addr(struct adapter *adapter, int pidx,
+ u8 hw_addr[])
+{
+ memcpy(adapter->port[pidx]->dev_addr, hw_addr, ETH_ALEN);
+ memcpy(adapter->port[pidx]->perm_addr, hw_addr, ETH_ALEN);
+}
+
+/**
+ * netdev2pinfo - return the port_info structure associated with a net_device
+ * @dev: the netdev
+ *
+ * Return the struct port_info associated with a net_device
+ */
+static inline struct port_info *netdev2pinfo(const struct net_device *dev)
+{
+ return netdev_priv(dev);
+}
+
+/**
+ * adap2pinfo - return the port_info of a port
+ * @adap: the adapter
+ * @pidx: the port index
+ *
+ * Return the port_info structure for the adapter.
+ */
+static inline struct port_info *adap2pinfo(struct adapter *adapter, int pidx)
+{
+ return netdev_priv(adapter->port[pidx]);
+}
+
+/**
+ * netdev2adap - return the adapter structure associated with a net_device
+ * @dev: the netdev
+ *
+ * Return the struct adapter associated with a net_device
+ */
+static inline struct adapter *netdev2adap(const struct net_device *dev)
+{
+ return netdev2pinfo(dev)->adapter;
+}
+
+/*
+ * OS "Callback" function declarations. These are functions that the OS code
+ * is "contracted" to provide for the common code.
+ */
+void t4vf_os_link_changed(struct adapter *, int, int);
+
+/*
+ * SGE function prototype declarations.
+ */
+int t4vf_sge_alloc_rxq(struct adapter *, struct sge_rspq *, bool,
+ struct net_device *, int,
+ struct sge_fl *, rspq_handler_t);
+int t4vf_sge_alloc_eth_txq(struct adapter *, struct sge_eth_txq *,
+ struct net_device *, struct netdev_queue *,
+ unsigned int);
+void t4vf_free_sge_resources(struct adapter *);
+
+int t4vf_eth_xmit(struct sk_buff *, struct net_device *);
+int t4vf_ethrx_handler(struct sge_rspq *, const __be64 *,
+ const struct pkt_gl *);
+
+irq_handler_t t4vf_intr_handler(struct adapter *);
+irqreturn_t t4vf_sge_intr_msix(int, void *);
+
+int t4vf_sge_init(struct adapter *);
+void t4vf_sge_start(struct adapter *);
+void t4vf_sge_stop(struct adapter *);
+
+#endif /* __CXGB4VF_ADAPTER_H__ */