Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
drivers/usb/input/hid.h
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index f9b1719..9980a4d 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -24,7 +24,7 @@
default y if ARCH_S3C2410
default y if PXA27x
default y if ARCH_EP93XX
- default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
+ default y if ARCH_AT91
default y if ARCH_PNX4008
# PPC:
default y if STB03xxx
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index e656563..3dfa3e4 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -158,7 +158,7 @@
const struct cxacru_modem_type *modem_type;
int line_status;
- struct work_struct poll_work;
+ struct delayed_work poll_work;
/* contol handles */
struct mutex cm_serialize;
@@ -347,7 +347,7 @@
return 0;
}
-static void cxacru_poll_status(struct cxacru_data *instance);
+static void cxacru_poll_status(struct work_struct *work);
static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
struct atm_dev *atm_dev)
@@ -376,12 +376,14 @@
}
/* Start status polling */
- cxacru_poll_status(instance);
+ cxacru_poll_status(&instance->poll_work.work);
return 0;
}
-static void cxacru_poll_status(struct cxacru_data *instance)
+static void cxacru_poll_status(struct work_struct *work)
{
+ struct cxacru_data *instance =
+ container_of(work, struct cxacru_data, poll_work.work);
u32 buf[CXINF_MAX] = {};
struct usbatm_data *usbatm = instance->usbatm;
struct atm_dev *atm_dev = usbatm->atm_dev;
@@ -720,7 +722,7 @@
mutex_init(&instance->cm_serialize);
- INIT_WORK(&instance->poll_work, (void *)cxacru_poll_status, instance);
+ INIT_DELAYED_WORK(&instance->poll_work, cxacru_poll_status);
usbatm_instance->driver_data = instance;
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index c870c80..8ed6c75 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -142,7 +142,7 @@
struct speedtch_params params; /* set in probe, constant afterwards */
- struct work_struct status_checker;
+ struct delayed_work status_checker;
unsigned char last_status;
@@ -498,8 +498,11 @@
return ret;
}
-static void speedtch_check_status(struct speedtch_instance_data *instance)
+static void speedtch_check_status(struct work_struct *work)
{
+ struct speedtch_instance_data *instance =
+ container_of(work, struct speedtch_instance_data,
+ status_checker.work);
struct usbatm_data *usbatm = instance->usbatm;
struct atm_dev *atm_dev = usbatm->atm_dev;
unsigned char *buf = instance->scratch_buffer;
@@ -576,7 +579,7 @@
{
struct speedtch_instance_data *instance = (void *)data;
- schedule_work(&instance->status_checker);
+ schedule_delayed_work(&instance->status_checker, 0);
/* The following check is racy, but the race is harmless */
if (instance->poll_delay < MAX_POLL_DELAY)
@@ -596,7 +599,7 @@
if (int_urb) {
ret = usb_submit_urb(int_urb, GFP_ATOMIC);
if (!ret)
- schedule_work(&instance->status_checker);
+ schedule_delayed_work(&instance->status_checker, 0);
else {
atm_dbg(instance->usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
@@ -640,7 +643,7 @@
if ((int_urb = instance->int_urb)) {
ret = usb_submit_urb(int_urb, GFP_ATOMIC);
- schedule_work(&instance->status_checker);
+ schedule_delayed_work(&instance->status_checker, 0);
if (ret < 0) {
atm_dbg(usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
goto fail;
@@ -834,8 +837,8 @@
const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
if ((endpoint_desc->bEndpointAddress == target_address)) {
- use_isoc = (endpoint_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_ISOC;
+ use_isoc =
+ usb_endpoint_xfer_isoc(endpoint_desc);
break;
}
}
@@ -855,7 +858,7 @@
usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
- INIT_WORK(&instance->status_checker, (void *)speedtch_check_status, instance);
+ INIT_DELAYED_WORK(&instance->status_checker, speedtch_check_status);
instance->status_checker.timer.function = speedtch_status_poll;
instance->status_checker.timer.data = (unsigned long)instance;
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index f6b9f7e..dae4ef1 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -64,6 +64,8 @@
#include <linux/kthread.h>
#include <linux/version.h>
#include <linux/mutex.h>
+#include <linux/freezer.h>
+
#include <asm/unaligned.h>
#include "usbatm.h"
@@ -401,9 +403,8 @@
int ret = -ENOMEM;
u8 *xfer_buff;
- xfer_buff = kmalloc(size, GFP_KERNEL);
+ xfer_buff = kmemdup(buff, size, GFP_KERNEL);
if (xfer_buff) {
- memcpy(xfer_buff, buff, size);
ret = usb_control_msg(usb,
usb_sndctrlpipe(usb, 0),
LOAD_INTERNAL,
@@ -595,14 +596,12 @@
u8 *xfer_buff;
int bytes_read;
- xfer_buff = kmalloc(size, GFP_KERNEL);
+ xfer_buff = kmemdup(data, size, GFP_KERNEL);
if (!xfer_buff) {
uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
return ret;
}
- memcpy(xfer_buff, data, size);
-
ret = usb_bulk_msg(sc->usb_dev,
usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE),
xfer_buff, size, &bytes_read, BULK_TIMEOUT);
@@ -658,9 +657,9 @@
/*
* The uea_load_page() function must be called within a process context
*/
-static void uea_load_page(void *xsc)
+static void uea_load_page(struct work_struct *work)
{
- struct uea_softc *sc = xsc;
+ struct uea_softc *sc = container_of(work, struct uea_softc, task);
u16 pageno = sc->pageno;
u16 ovl = sc->ovl;
struct block_info bi;
@@ -765,12 +764,11 @@
u8 *xfer_buff;
int ret = -ENOMEM;
- xfer_buff = kmalloc(size, GFP_KERNEL);
+ xfer_buff = kmemdup(data, size, GFP_KERNEL);
if (!xfer_buff) {
uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
return ret;
}
- memcpy(xfer_buff, data, size);
ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0),
UCDC_SEND_ENCAPSULATED_COMMAND,
@@ -1352,7 +1350,7 @@
uea_enters(INS_TO_USBDEV(sc));
- INIT_WORK(&sc->task, uea_load_page, sc);
+ INIT_WORK(&sc->task, uea_load_page);
init_waitqueue_head(&sc->sync_q);
init_waitqueue_head(&sc->cmv_ack_wait);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 9a9012f..7f1fa95 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -421,9 +421,9 @@
schedule_work(&acm->work);
}
-static void acm_softint(void *private)
+static void acm_softint(struct work_struct *work)
{
- struct acm *acm = private;
+ struct acm *acm = container_of(work, struct acm, work);
dbg("Entering acm_softint.");
if (!ACM_READY(acm))
@@ -892,7 +892,7 @@
/* workaround for switched endpoints */
- if ((epread->bEndpointAddress & USB_DIR_IN) != USB_DIR_IN) {
+ if (!usb_endpoint_dir_in(epread)) {
/* descriptors are swapped */
struct usb_endpoint_descriptor *t;
dev_dbg(&intf->dev,"The data interface has switched endpoints");
@@ -927,7 +927,7 @@
acm->rx_buflimit = num_rx_buf;
acm->urb_task.func = acm_rx_tasklet;
acm->urb_task.data = (unsigned long) acm;
- INIT_WORK(&acm->work, acm_softint, acm);
+ INIT_WORK(&acm->work, acm_softint);
spin_lock_init(&acm->throttle_lock);
spin_lock_init(&acm->write_lock);
spin_lock_init(&acm->read_lock);
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 6e3b535..f8324d8 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -72,6 +72,21 @@
If you are unsure about this, say N here.
+config USB_MULTITHREAD_PROBE
+ bool "USB Multi-threaded probe (EXPERIMENTAL)"
+ depends on USB && EXPERIMENTAL
+ default n
+ help
+ Say Y here if you want the USB core to spawn a new thread for
+ every USB device that is probed. This can cause a small speedup
+ in boot times on systems with a lot of different USB devices.
+
+ This option should be safe to enable, but if any odd probing
+ problems are found, please disable it, or dynamically turn it
+ off in the /sys/module/usbcore/parameters/multithread_probe
+ file
+
+ When in doubt, say N.
config USB_OTG
bool
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index 840442a..c3915dc 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -93,7 +93,7 @@
}
-/* sometimes alloc/free could use kmalloc with SLAB_DMA, for
+/* sometimes alloc/free could use kmalloc with GFP_DMA, for
* better sharing and to leverage mm/slab.c intelligence.
*/
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 3538c2f..ea398e5 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -175,12 +175,13 @@
)
{
char dir, unit, *type;
- unsigned interval, in, bandwidth = 1;
+ unsigned interval, bandwidth = 1;
if (start > end)
return start;
- in = (desc->bEndpointAddress & USB_DIR_IN);
- dir = in ? 'I' : 'O';
+
+ dir = usb_endpoint_dir_in(desc) ? 'I' : 'O';
+
if (speed == USB_SPEED_HIGH) {
switch (le16_to_cpu(desc->wMaxPacketSize) & (0x03 << 11)) {
case 1 << 11: bandwidth = 2; break;
@@ -204,7 +205,7 @@
break;
case USB_ENDPOINT_XFER_BULK:
type = "Bulk";
- if (speed == USB_SPEED_HIGH && !in) /* uframes per NAK */
+ if (speed == USB_SPEED_HIGH && dir == 'O') /* uframes per NAK */
interval = desc->bInterval;
else
interval = 0;
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index fed92be..3ed4cb2 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -561,7 +561,7 @@
dev = inode->i_private;
if (!dev)
goto out;
- ret = usb_autoresume_device(dev, 1);
+ ret = usb_autoresume_device(dev);
if (ret)
goto out;
@@ -609,7 +609,7 @@
releaseintf(ps, ifnum);
}
destroy_all_async(ps);
- usb_autosuspend_device(dev, 1);
+ usb_autosuspend_device(dev);
usb_unlock_device(dev);
usb_put_dev(dev);
put_pid(ps->disc_pid);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 113e484..d6eb5ce 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -205,7 +205,7 @@
if (id) {
dev_dbg(dev, "%s - got id\n", __FUNCTION__);
- error = usb_autoresume_device(udev, 1);
+ error = usb_autoresume_device(udev);
if (error)
return error;
@@ -229,7 +229,7 @@
} else
intf->condition = USB_INTERFACE_BOUND;
- usb_autosuspend_device(udev, 1);
+ usb_autosuspend_device(udev);
}
return error;
@@ -247,7 +247,7 @@
/* Autoresume for set_interface call below */
udev = interface_to_usbdev(intf);
- error = usb_autoresume_device(udev, 1);
+ error = usb_autoresume_device(udev);
/* release all urbs for this interface */
usb_disable_interface(interface_to_usbdev(intf), intf);
@@ -265,7 +265,7 @@
intf->needs_remote_wakeup = 0;
if (!error)
- usb_autosuspend_device(udev, 1);
+ usb_autosuspend_device(udev);
return 0;
}
@@ -408,6 +408,16 @@
(id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
return 0;
+ /* The interface class, subclass, and protocol should never be
+ * checked for a match if the device class is Vendor Specific,
+ * unless the match record specifies the Vendor ID. */
+ if (dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC &&
+ !(id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+ (id->match_flags & (USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS |
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL)))
+ return 0;
+
if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) &&
(id->bInterfaceClass != intf->desc.bInterfaceClass))
return 0;
@@ -476,7 +486,17 @@
* most general; they let drivers bind to any interface on a
* multiple-function device. Use the USB_INTERFACE_INFO
* macro, or its siblings, to match class-per-interface style
- * devices (as recorded in bDeviceClass).
+ * devices (as recorded in bInterfaceClass).
+ *
+ * Note that an entry created by USB_INTERFACE_INFO won't match
+ * any interface if the device class is set to Vendor-Specific.
+ * This is deliberate; according to the USB spec the meanings of
+ * the interface class/subclass/protocol for these devices are also
+ * vendor-specific, and hence matching against a standard product
+ * class wouldn't work anyway. If you really want to use an
+ * interface-based match for such a device, create a match record
+ * that also specifies the vendor ID. (Unforunately there isn't a
+ * standard macro for creating records like this.)
*
* Within those groups, remember that not all combinations are
* meaningful. For example, don't give a product version range
@@ -505,7 +525,7 @@
}
EXPORT_SYMBOL_GPL_FUTURE(usb_match_id);
-int usb_device_match(struct device *dev, struct device_driver *drv)
+static int usb_device_match(struct device *dev, struct device_driver *drv)
{
/* devices and interfaces are handled separately */
if (is_usb_device(dev)) {
@@ -790,7 +810,7 @@
#ifdef CONFIG_PM
/* Caller has locked udev's pm_mutex */
-static int suspend_device(struct usb_device *udev, pm_message_t msg)
+static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
{
struct usb_device_driver *udriver;
int status = 0;
@@ -817,7 +837,7 @@
}
/* Caller has locked udev's pm_mutex */
-static int resume_device(struct usb_device *udev)
+static int usb_resume_device(struct usb_device *udev)
{
struct usb_device_driver *udriver;
int status = 0;
@@ -843,7 +863,7 @@
}
/* Caller has locked intf's usb_device's pm mutex */
-static int suspend_interface(struct usb_interface *intf, pm_message_t msg)
+static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
{
struct usb_driver *driver;
int status = 0;
@@ -880,7 +900,7 @@
}
/* Caller has locked intf's usb_device's pm_mutex */
-static int resume_interface(struct usb_interface *intf)
+static int usb_resume_interface(struct usb_interface *intf)
{
struct usb_driver *driver;
int status = 0;
@@ -920,6 +940,44 @@
return status;
}
+#ifdef CONFIG_USB_SUSPEND
+
+/* Internal routine to check whether we may autosuspend a device. */
+static int autosuspend_check(struct usb_device *udev)
+{
+ int i;
+ struct usb_interface *intf;
+
+ /* For autosuspend, fail fast if anything is in use.
+ * Also fail if any interfaces require remote wakeup but it
+ * isn't available. */
+ udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
+ if (udev->pm_usage_cnt > 0)
+ return -EBUSY;
+ if (udev->actconfig) {
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ intf = udev->actconfig->interface[i];
+ if (!is_active(intf))
+ continue;
+ if (intf->pm_usage_cnt > 0)
+ return -EBUSY;
+ if (intf->needs_remote_wakeup &&
+ !udev->do_remote_wakeup) {
+ dev_dbg(&udev->dev, "remote wakeup needed "
+ "for autosuspend\n");
+ return -EOPNOTSUPP;
+ }
+ }
+ }
+ return 0;
+}
+
+#else
+
+#define autosuspend_check(udev) 0
+
+#endif
+
/**
* usb_suspend_both - suspend a USB device and its interfaces
* @udev: the usb_device to suspend
@@ -971,52 +1029,34 @@
udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
- /* For autosuspend, fail fast if anything is in use.
- * Also fail if any interfaces require remote wakeup but it
- * isn't available. */
if (udev->auto_pm) {
- if (udev->pm_usage_cnt > 0)
- return -EBUSY;
- if (udev->actconfig) {
- for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
- intf = udev->actconfig->interface[i];
- if (!is_active(intf))
- continue;
- if (intf->pm_usage_cnt > 0)
- return -EBUSY;
- if (intf->needs_remote_wakeup &&
- !udev->do_remote_wakeup) {
- dev_dbg(&udev->dev,
- "remote wakeup needed for autosuspend\n");
- return -EOPNOTSUPP;
- }
- }
- i = 0;
- }
+ status = autosuspend_check(udev);
+ if (status < 0)
+ return status;
}
/* Suspend all the interfaces and then udev itself */
if (udev->actconfig) {
for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
- status = suspend_interface(intf, msg);
+ status = usb_suspend_interface(intf, msg);
if (status != 0)
break;
}
}
if (status == 0)
- status = suspend_device(udev, msg);
+ status = usb_suspend_device(udev, msg);
/* If the suspend failed, resume interfaces that did get suspended */
if (status != 0) {
while (--i >= 0) {
intf = udev->actconfig->interface[i];
- resume_interface(intf);
+ usb_resume_interface(intf);
}
/* If the suspend succeeded, propagate it up the tree */
} else if (parent)
- usb_autosuspend_device(parent, 0);
+ usb_autosuspend_device(parent);
// dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
return status;
@@ -1064,9 +1104,25 @@
/* Propagate the resume up the tree, if necessary */
if (udev->state == USB_STATE_SUSPENDED) {
if (parent) {
- usb_pm_lock(parent);
- parent->auto_pm = 1;
- status = usb_resume_both(parent);
+ status = usb_autoresume_device(parent);
+ if (status == 0) {
+ status = usb_resume_device(udev);
+ if (status) {
+ usb_autosuspend_device(parent);
+
+ /* It's possible usb_resume_device()
+ * failed after the port was
+ * unsuspended, causing udev to be
+ * logically disconnected. We don't
+ * want usb_disconnect() to autosuspend
+ * the parent again, so tell it that
+ * udev disconnected while still
+ * suspended. */
+ if (udev->state ==
+ USB_STATE_NOTATTACHED)
+ udev->discon_suspended = 1;
+ }
+ }
} else {
/* We can't progagate beyond the USB subsystem,
@@ -1075,24 +1131,20 @@
if (udev->dev.parent->power.power_state.event !=
PM_EVENT_ON)
status = -EHOSTUNREACH;
- }
- if (status == 0)
- status = resume_device(udev);
- if (parent)
- usb_pm_unlock(parent);
+ else
+ status = usb_resume_device(udev);
+ }
} else {
/* Needed only for setting udev->dev.power.power_state.event
* and for possible debugging message. */
- status = resume_device(udev);
+ status = usb_resume_device(udev);
}
- /* Now the parent won't suspend until we are finished */
-
if (status == 0 && udev->actconfig) {
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
- resume_interface(intf);
+ usb_resume_interface(intf);
}
}
@@ -1102,39 +1154,53 @@
#ifdef CONFIG_USB_SUSPEND
+/* Internal routine to adjust a device's usage counter and change
+ * its autosuspend state.
+ */
+static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt)
+{
+ int status = 0;
+
+ usb_pm_lock(udev);
+ udev->pm_usage_cnt += inc_usage_cnt;
+ WARN_ON(udev->pm_usage_cnt < 0);
+ if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) {
+ udev->auto_pm = 1;
+ status = usb_resume_both(udev);
+ if (status != 0)
+ udev->pm_usage_cnt -= inc_usage_cnt;
+ } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0)
+ queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
+ USB_AUTOSUSPEND_DELAY);
+ usb_pm_unlock(udev);
+ return status;
+}
+
/**
* usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces
* @udev: the usb_device to autosuspend
- * @dec_usage_cnt: flag to decrement @udev's PM-usage counter
*
* This routine should be called when a core subsystem is finished using
* @udev and wants to allow it to autosuspend. Examples would be when
* @udev's device file in usbfs is closed or after a configuration change.
*
- * @dec_usage_cnt should be 1 if the subsystem previously incremented
- * @udev's usage counter (such as by passing 1 to usb_autoresume_device);
- * otherwise it should be 0.
- *
- * If the usage counter for @udev or any of its active interfaces is greater
- * than 0, the autosuspend request will not be queued. (If an interface
- * driver does not support autosuspend then its usage counter is permanently
- * positive.) Likewise, if an interface driver requires remote-wakeup
- * capability during autosuspend but remote wakeup is disabled, the
- * autosuspend will fail.
+ * @udev's usage counter is decremented. If it or any of the usage counters
+ * for an active interface is greater than 0, no autosuspend request will be
+ * queued. (If an interface driver does not support autosuspend then its
+ * usage counter is permanently positive.) Furthermore, if an interface
+ * driver requires remote-wakeup capability during autosuspend but remote
+ * wakeup is disabled, the autosuspend will fail.
*
* Often the caller will hold @udev's device lock, but this is not
* necessary.
*
* This routine can run only in process context.
*/
-void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt)
+void usb_autosuspend_device(struct usb_device *udev)
{
- usb_pm_lock(udev);
- udev->pm_usage_cnt -= dec_usage_cnt;
- if (udev->pm_usage_cnt <= 0)
- queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
- USB_AUTOSUSPEND_DELAY);
- usb_pm_unlock(udev);
+ int status;
+
+ status = usb_autopm_do_device(udev, -1);
// dev_dbg(&udev->dev, "%s: cnt %d\n",
// __FUNCTION__, udev->pm_usage_cnt);
}
@@ -1142,44 +1208,59 @@
/**
* usb_autoresume_device - immediately autoresume a USB device and its interfaces
* @udev: the usb_device to autoresume
- * @inc_usage_cnt: flag to increment @udev's PM-usage counter
*
* This routine should be called when a core subsystem wants to use @udev
- * and needs to guarantee that it is not suspended. In addition, the
- * caller can prevent @udev from being autosuspended subsequently. (Note
- * that this will not prevent suspend events originating in the PM core.)
- * Examples would be when @udev's device file in usbfs is opened (autosuspend
- * should be prevented until the file is closed) or when a remote-wakeup
- * request is received (later autosuspends should not be prevented).
+ * and needs to guarantee that it is not suspended. No autosuspend will
+ * occur until usb_autosuspend_device is called. (Note that this will not
+ * prevent suspend events originating in the PM core.) Examples would be
+ * when @udev's device file in usbfs is opened or when a remote-wakeup
+ * request is received.
*
- * @inc_usage_cnt should be 1 to increment @udev's usage counter and prevent
- * autosuspends. This prevention will persist until the usage counter is
- * decremented again (such as by passing 1 to usb_autosuspend_device).
- * Otherwise @inc_usage_cnt should be 0 to leave the usage counter unchanged.
- * Regardless, if the autoresume fails then the usage counter is not
- * incremented.
+ * @udev's usage counter is incremented to prevent subsequent autosuspends.
+ * However if the autoresume fails then the usage counter is re-decremented.
*
* Often the caller will hold @udev's device lock, but this is not
* necessary (and attempting it might cause deadlock).
*
* This routine can run only in process context.
*/
-int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt)
+int usb_autoresume_device(struct usb_device *udev)
{
int status;
- usb_pm_lock(udev);
- udev->pm_usage_cnt += inc_usage_cnt;
- udev->auto_pm = 1;
- status = usb_resume_both(udev);
- if (status != 0)
- udev->pm_usage_cnt -= inc_usage_cnt;
- usb_pm_unlock(udev);
+ status = usb_autopm_do_device(udev, 1);
// dev_dbg(&udev->dev, "%s: status %d cnt %d\n",
// __FUNCTION__, status, udev->pm_usage_cnt);
return status;
}
+/* Internal routine to adjust an interface's usage counter and change
+ * its device's autosuspend state.
+ */
+static int usb_autopm_do_interface(struct usb_interface *intf,
+ int inc_usage_cnt)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ int status = 0;
+
+ usb_pm_lock(udev);
+ if (intf->condition == USB_INTERFACE_UNBOUND)
+ status = -ENODEV;
+ else {
+ intf->pm_usage_cnt += inc_usage_cnt;
+ if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) {
+ udev->auto_pm = 1;
+ status = usb_resume_both(udev);
+ if (status != 0)
+ intf->pm_usage_cnt -= inc_usage_cnt;
+ } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0)
+ queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
+ USB_AUTOSUSPEND_DELAY);
+ }
+ usb_pm_unlock(udev);
+ return status;
+}
+
/**
* usb_autopm_put_interface - decrement a USB interface's PM-usage counter
* @intf: the usb_interface whose counter should be decremented
@@ -1213,17 +1294,11 @@
*/
void usb_autopm_put_interface(struct usb_interface *intf)
{
- struct usb_device *udev = interface_to_usbdev(intf);
+ int status;
- usb_pm_lock(udev);
- if (intf->condition != USB_INTERFACE_UNBOUND &&
- --intf->pm_usage_cnt <= 0) {
- queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
- USB_AUTOSUSPEND_DELAY);
- }
- usb_pm_unlock(udev);
- // dev_dbg(&intf->dev, "%s: cnt %d\n",
- // __FUNCTION__, intf->pm_usage_cnt);
+ status = usb_autopm_do_interface(intf, -1);
+ // dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
+ // __FUNCTION__, status, intf->pm_usage_cnt);
}
EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
@@ -1260,26 +1335,37 @@
*/
int usb_autopm_get_interface(struct usb_interface *intf)
{
- struct usb_device *udev = interface_to_usbdev(intf);
- int status;
+ int status;
- usb_pm_lock(udev);
- if (intf->condition == USB_INTERFACE_UNBOUND)
- status = -ENODEV;
- else {
- ++intf->pm_usage_cnt;
- udev->auto_pm = 1;
- status = usb_resume_both(udev);
- if (status != 0)
- --intf->pm_usage_cnt;
- }
- usb_pm_unlock(udev);
+ status = usb_autopm_do_interface(intf, 1);
// dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
// __FUNCTION__, status, intf->pm_usage_cnt);
return status;
}
EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
+/**
+ * usb_autopm_set_interface - set a USB interface's autosuspend state
+ * @intf: the usb_interface whose state should be set
+ *
+ * This routine sets the autosuspend state of @intf's device according
+ * to @intf's usage counter, which the caller must have set previously.
+ * If the counter is <= 0, the device is autosuspended (if it isn't
+ * already suspended and if nothing else prevents the autosuspend). If
+ * the counter is > 0, the device is autoresumed (if it isn't already
+ * awake).
+ */
+int usb_autopm_set_interface(struct usb_interface *intf)
+{
+ int status;
+
+ status = usb_autopm_do_interface(intf, 0);
+ // dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
+ // __FUNCTION__, status, intf->pm_usage_cnt);
+ return status;
+}
+EXPORT_SYMBOL_GPL(usb_autopm_set_interface);
+
#endif /* CONFIG_USB_SUSPEND */
static int usb_suspend(struct device *dev, pm_message_t message)
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 3b2d137..c505b76 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -10,15 +10,20 @@
*/
#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
#include <linux/usb.h>
#include "usb.h"
-/* endpoint stuff */
+#define MAX_ENDPOINT_MINORS (64*128*32)
+static int usb_endpoint_major;
+static DEFINE_IDR(endpoint_idr);
struct ep_device {
struct usb_endpoint_descriptor *desc;
struct usb_device *udev;
struct device dev;
+ int minor;
};
#define to_ep_device(_dev) \
container_of(_dev, struct ep_device, dev)
@@ -152,6 +157,55 @@
.attrs = ep_dev_attrs,
};
+static int usb_endpoint_major_init(void)
+{
+ dev_t dev;
+ int error;
+
+ error = alloc_chrdev_region(&dev, 0, MAX_ENDPOINT_MINORS,
+ "usb_endpoint");
+ if (error) {
+ err("unable to get a dynamic major for usb endpoints");
+ return error;
+ }
+ usb_endpoint_major = MAJOR(dev);
+
+ return error;
+}
+
+static void usb_endpoint_major_cleanup(void)
+{
+ unregister_chrdev_region(MKDEV(usb_endpoint_major, 0),
+ MAX_ENDPOINT_MINORS);
+}
+
+static int endpoint_get_minor(struct ep_device *ep_dev)
+{
+ static DEFINE_MUTEX(minor_lock);
+ int retval = -ENOMEM;
+ int id;
+
+ mutex_lock(&minor_lock);
+ if (idr_pre_get(&endpoint_idr, GFP_KERNEL) == 0)
+ goto exit;
+
+ retval = idr_get_new(&endpoint_idr, ep_dev, &id);
+ if (retval < 0) {
+ if (retval == -EAGAIN)
+ retval = -ENOMEM;
+ goto exit;
+ }
+ ep_dev->minor = id & MAX_ID_MASK;
+exit:
+ mutex_unlock(&minor_lock);
+ return retval;
+}
+
+static void endpoint_free_minor(struct ep_device *ep_dev)
+{
+ idr_remove(&endpoint_idr, ep_dev->minor);
+}
+
static struct endpoint_class {
struct kref kref;
struct class *class;
@@ -176,11 +230,20 @@
ep_class->class = class_create(THIS_MODULE, "usb_endpoint");
if (IS_ERR(ep_class->class)) {
result = IS_ERR(ep_class->class);
- kfree(ep_class);
- ep_class = NULL;
- goto exit;
+ goto class_create_error;
}
+ result = usb_endpoint_major_init();
+ if (result)
+ goto endpoint_major_error;
+
+ goto exit;
+
+endpoint_major_error:
+ class_destroy(ep_class->class);
+class_create_error:
+ kfree(ep_class);
+ ep_class = NULL;
exit:
return result;
}
@@ -191,6 +254,7 @@
class_destroy(ep_class->class);
kfree(ep_class);
ep_class = NULL;
+ usb_endpoint_major_cleanup();
}
static void destroy_endpoint_class(void)
@@ -213,7 +277,6 @@
{
char name[8];
struct ep_device *ep_dev;
- int minor;
int retval;
retval = init_endpoint_class();
@@ -226,12 +289,16 @@
goto error_alloc;
}
- /* fun calculation to determine the minor of this endpoint */
- minor = (((udev->bus->busnum - 1) * 128) * 16) + (udev->devnum - 1);
+ retval = endpoint_get_minor(ep_dev);
+ if (retval) {
+ dev_err(parent, "can not allocate minor number for %s",
+ ep_dev->dev.bus_id);
+ goto error_register;
+ }
ep_dev->desc = &endpoint->desc;
ep_dev->udev = udev;
- ep_dev->dev.devt = MKDEV(442, minor); // FIXME fake number...
+ ep_dev->dev.devt = MKDEV(usb_endpoint_major, ep_dev->minor);
ep_dev->dev.class = ep_class->class;
ep_dev->dev.parent = parent;
ep_dev->dev.release = ep_device_release;
@@ -241,7 +308,7 @@
retval = device_register(&ep_dev->dev);
if (retval)
- goto error_register;
+ goto error_chrdev;
retval = sysfs_create_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
if (retval)
goto error_group;
@@ -261,6 +328,9 @@
destroy_endpoint_class();
return retval;
+error_chrdev:
+ endpoint_free_minor(ep_dev);
+
error_register:
kfree(ep_dev);
error_alloc:
@@ -271,14 +341,16 @@
void usb_remove_ep_files(struct usb_host_endpoint *endpoint)
{
+ struct ep_device *ep_dev = endpoint->ep_dev;
- if (endpoint->ep_dev) {
+ if (ep_dev) {
char name[8];
sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
- sysfs_remove_link(&endpoint->ep_dev->dev.parent->kobj, name);
- sysfs_remove_group(&endpoint->ep_dev->dev.kobj, &ep_dev_attr_grp);
- device_unregister(&endpoint->ep_dev->dev);
+ sysfs_remove_link(&ep_dev->dev.parent->kobj, name);
+ sysfs_remove_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
+ endpoint_free_minor(ep_dev);
+ device_unregister(&ep_dev->dev);
endpoint->ep_dev = NULL;
destroy_endpoint_class();
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index afa2dd2..10064af 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -256,7 +256,9 @@
0x05, /* __u8 ep_bDescriptorType; Endpoint */
0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
+ /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
+ * see hub.c:hub_configure() for details. */
+ (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
};
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index ba165af..2651c2e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -22,6 +22,7 @@
#include <linux/usbdevice_fs.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
+#include <linux/freezer.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
@@ -31,6 +32,47 @@
#include "hcd.h"
#include "hub.h"
+struct usb_hub {
+ struct device *intfdev; /* the "interface" device */
+ struct usb_device *hdev;
+ struct urb *urb; /* for interrupt polling pipe */
+
+ /* buffer for urb ... with extra space in case of babble */
+ char (*buffer)[8];
+ dma_addr_t buffer_dma; /* DMA address for buffer */
+ union {
+ struct usb_hub_status hub;
+ struct usb_port_status port;
+ } *status; /* buffer for status reports */
+
+ int error; /* last reported error */
+ int nerrors; /* track consecutive errors */
+
+ struct list_head event_list; /* hubs w/data or errs ready */
+ unsigned long event_bits[1]; /* status change bitmask */
+ unsigned long change_bits[1]; /* ports with logical connect
+ status change */
+ unsigned long busy_bits[1]; /* ports being reset or
+ resumed */
+#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
+#error event_bits[] is too short!
+#endif
+
+ struct usb_hub_descriptor *descriptor; /* class descriptor */
+ struct usb_tt tt; /* Transaction Translator */
+
+ unsigned mA_per_port; /* current for each child */
+
+ unsigned limited_power:1;
+ unsigned quiescing:1;
+ unsigned activating:1;
+
+ unsigned has_indicators:1;
+ u8 indicator[USB_MAXCHILDREN];
+ struct delayed_work leds;
+};
+
+
/* Protect struct usb_device->state and ->children members
* Note: Both are also protected by ->dev.sem, except that ->state can
* change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
@@ -45,6 +87,16 @@
static struct task_struct *khubd_task;
+/* multithreaded probe logic */
+static int multithread_probe =
+#ifdef CONFIG_USB_MULTITHREAD_PROBE
+ 1;
+#else
+ 0;
+#endif
+module_param(multithread_probe, bool, S_IRUGO);
+MODULE_PARM_DESC(multithread_probe, "Run each USB device probe in a new thread");
+
/* cycle leds on hubs that aren't blinking for attention */
static int blinkenlights = 0;
module_param (blinkenlights, bool, S_IRUGO);
@@ -167,9 +219,10 @@
#define LED_CYCLE_PERIOD ((2*HZ)/3)
-static void led_work (void *__hub)
+static void led_work (struct work_struct *work)
{
- struct usb_hub *hub = __hub;
+ struct usb_hub *hub =
+ container_of(work, struct usb_hub, leds.work);
struct usb_device *hdev = hub->hdev;
unsigned i;
unsigned changed = 0;
@@ -276,6 +329,9 @@
{
unsigned long flags;
+ /* Suppress autosuspend until khubd runs */
+ to_usb_interface(hub->intfdev)->pm_usage_cnt = 1;
+
spin_lock_irqsave(&hub_event_lock, flags);
if (list_empty(&hub->event_list)) {
list_add_tail(&hub->event_list, &hub_event_list);
@@ -351,9 +407,10 @@
* talking to TTs must queue control transfers (not just bulk and iso), so
* both can talk to the same hub concurrently.
*/
-static void hub_tt_kevent (void *arg)
+static void hub_tt_kevent (struct work_struct *work)
{
- struct usb_hub *hub = arg;
+ struct usb_hub *hub =
+ container_of(work, struct usb_hub, tt.kevent);
unsigned long flags;
spin_lock_irqsave (&hub->tt.lock, flags);
@@ -404,7 +461,7 @@
* since each TT has "at least two" buffers that can need it (and
* there can be many TTs per hub). even if they're uncommon.
*/
- if ((clear = kmalloc (sizeof *clear, SLAB_ATOMIC)) == NULL) {
+ if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
/* FIXME recover somehow ... RESET_TT? */
return;
@@ -457,7 +514,6 @@
/* (nonblocking) khubd and related activity won't re-trigger */
hub->quiescing = 1;
hub->activating = 0;
- hub->resume_root_hub = 0;
/* (blocking) stop khubd and related activity */
usb_kill_urb(hub->urb);
@@ -473,7 +529,7 @@
hub->quiescing = 0;
hub->activating = 1;
- hub->resume_root_hub = 0;
+
status = usb_submit_urb(hub->urb, GFP_NOIO);
if (status < 0)
dev_err(hub->intfdev, "activate --> %d\n", status);
@@ -641,7 +697,7 @@
spin_lock_init (&hub->tt.lock);
INIT_LIST_HEAD (&hub->tt.clear_list);
- INIT_WORK (&hub->tt.kevent, hub_tt_kevent, hub);
+ INIT_WORK (&hub->tt.kevent, hub_tt_kevent);
switch (hdev->descriptor.bDeviceProtocol) {
case 0:
break;
@@ -759,7 +815,12 @@
dev_dbg(hub_dev, "%sover-current condition exists\n",
(hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
- /* set up the interrupt endpoint */
+ /* set up the interrupt endpoint
+ * We use the EP's maxpacket size instead of (PORTS+1+7)/8
+ * bytes as USB2.0[11.12.3] says because some hubs are known
+ * to send more data (and thus cause overflow). For root hubs,
+ * maxpktsize is defined in hcd.c's fake endpoint descriptors
+ * to be big enough for at least USB_MAXCHILDREN ports. */
pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe));
@@ -880,9 +941,10 @@
INIT_LIST_HEAD(&hub->event_list);
hub->intfdev = &intf->dev;
hub->hdev = hdev;
- INIT_WORK(&hub->leds, led_work, hub);
+ INIT_DELAYED_WORK(&hub->leds, led_work);
usb_set_intfdata (intf, hub);
+ intf->needs_remote_wakeup = 1;
if (hdev->speed == USB_SPEED_HIGH)
highspeed_hubs++;
@@ -980,6 +1042,8 @@
if (udev->children[i])
recursively_mark_NOTATTACHED(udev->children[i]);
}
+ if (udev->state == USB_STATE_SUSPENDED)
+ udev->discon_suspended = 1;
udev->state = USB_STATE_NOTATTACHED;
}
@@ -1169,6 +1233,14 @@
*pdev = NULL;
spin_unlock_irq(&device_state_lock);
+ /* Decrement the parent's count of unsuspended children */
+ if (udev->parent) {
+ usb_pm_lock(udev);
+ if (!udev->discon_suspended)
+ usb_autosuspend_device(udev->parent);
+ usb_pm_unlock(udev);
+ }
+
put_device(&udev->dev);
}
@@ -1191,29 +1263,17 @@
static int __usb_port_suspend(struct usb_device *, int port1);
#endif
-/**
- * usb_new_device - perform initial device setup (usbcore-internal)
- * @udev: newly addressed device (in ADDRESS state)
- *
- * This is called with devices which have been enumerated, but not yet
- * configured. The device descriptor is available, but not descriptors
- * for any device configuration. The caller must have locked either
- * the parent hub (if udev is a normal device) or else the
- * usb_bus_list_lock (if udev is a root hub). The parent's pointer to
- * udev has already been installed, but udev is not yet visible through
- * sysfs or other filesystem code.
- *
- * Returns 0 for success (device is configured and listed, with its
- * interfaces, in sysfs); else a negative errno value.
- *
- * This call is synchronous, and may not be used in an interrupt context.
- *
- * Only the hub driver or root-hub registrar should ever call this.
- */
-int usb_new_device(struct usb_device *udev)
+static int __usb_new_device(void *void_data)
{
+ struct usb_device *udev = void_data;
int err;
+ /* Lock ourself into memory in order to keep a probe sequence
+ * sleeping in a new thread from allowing us to be unloaded.
+ */
+ if (!try_module_get(THIS_MODULE))
+ return -EINVAL;
+
err = usb_get_configuration(udev);
if (err < 0) {
dev_err(&udev->dev, "can't read configurations, error %d\n",
@@ -1309,13 +1369,56 @@
goto fail;
}
- return 0;
+ /* Increment the parent's count of unsuspended children */
+ if (udev->parent)
+ usb_autoresume_device(udev->parent);
+
+exit:
+ module_put(THIS_MODULE);
+ return err;
fail:
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
- return err;
+ goto exit;
}
+/**
+ * usb_new_device - perform initial device setup (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * This is called with devices which have been enumerated, but not yet
+ * configured. The device descriptor is available, but not descriptors
+ * for any device configuration. The caller must have locked either
+ * the parent hub (if udev is a normal device) or else the
+ * usb_bus_list_lock (if udev is a root hub). The parent's pointer to
+ * udev has already been installed, but udev is not yet visible through
+ * sysfs or other filesystem code.
+ *
+ * The return value for this function depends on if the
+ * multithread_probe variable is set or not. If it's set, it will
+ * return a if the probe thread was successfully created or not. If the
+ * variable is not set, it will return if the device is configured
+ * properly or not. interfaces, in sysfs); else a negative errno value.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Only the hub driver or root-hub registrar should ever call this.
+ */
+int usb_new_device(struct usb_device *udev)
+{
+ struct task_struct *probe_task;
+ int ret = 0;
+
+ if (multithread_probe) {
+ probe_task = kthread_run(__usb_new_device, udev,
+ "usb-probe-%s", udev->devnum);
+ if (IS_ERR(probe_task))
+ ret = PTR_ERR(probe_task);
+ } else
+ ret = __usb_new_device(udev);
+
+ return ret;
+}
static int hub_port_status(struct usb_hub *hub, int port1,
u16 *status, u16 *change)
@@ -1323,10 +1426,12 @@
int ret;
ret = get_port_status(hub->hdev, port1, &hub->status->port);
- if (ret < 0)
+ if (ret < 4) {
dev_err (hub->intfdev,
"%s failed (err = %d)\n", __FUNCTION__, ret);
- else {
+ if (ret >= 0)
+ ret = -EIO;
+ } else {
*status = le16_to_cpu(hub->status->port.wPortStatus);
*change = le16_to_cpu(hub->status->port.wPortChange);
ret = 0;
@@ -1674,6 +1779,12 @@
hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
{
int status;
+ u16 portchange, portstatus;
+
+ /* Skip the initial Clear-Suspend step for a remote wakeup */
+ status = hub_port_status(hub, port1, &portstatus, &portchange);
+ if (status == 0 && !(portstatus & USB_PORT_STAT_SUSPEND))
+ goto SuspendCleared;
// dev_dbg(hub->intfdev, "resume port %d\n", port1);
@@ -1687,9 +1798,6 @@
"can't resume port %d, status %d\n",
port1, status);
} else {
- u16 devstatus;
- u16 portchange;
-
/* drive resume for at least 20 msec */
if (udev)
dev_dbg(&udev->dev, "usb %sresume\n",
@@ -1704,16 +1812,15 @@
* stop resume signaling. Then finish the resume
* sequence.
*/
- devstatus = portchange = 0;
- status = hub_port_status(hub, port1,
- &devstatus, &portchange);
+ status = hub_port_status(hub, port1, &portstatus, &portchange);
+SuspendCleared:
if (status < 0
- || (devstatus & LIVE_FLAGS) != LIVE_FLAGS
- || (devstatus & USB_PORT_STAT_SUSPEND) != 0
+ || (portstatus & LIVE_FLAGS) != LIVE_FLAGS
+ || (portstatus & USB_PORT_STAT_SUSPEND) != 0
) {
dev_dbg(hub->intfdev,
"port %d status %04x.%04x after resume, %d\n",
- port1, portchange, devstatus, status);
+ port1, portchange, portstatus, status);
if (status >= 0)
status = -ENODEV;
} else {
@@ -1774,23 +1881,16 @@
{
int status = 0;
- /* All this just to avoid sending a port-resume message
- * to the parent hub! */
-
usb_lock_device(udev);
- usb_pm_lock(udev);
if (udev->state == USB_STATE_SUSPENDED) {
dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
- /* TRSMRCY = 10 msec */
- msleep(10);
- status = finish_port_resume(udev);
- if (status == 0)
- udev->dev.power.power_state.event = PM_EVENT_ON;
- }
- usb_pm_unlock(udev);
+ status = usb_autoresume_device(udev);
- if (status == 0)
- usb_autoresume_device(udev, 0);
+ /* Give the interface drivers a chance to do something,
+ * then autosuspend the device again. */
+ if (status == 0)
+ usb_autosuspend_device(udev);
+ }
usb_unlock_device(udev);
return status;
}
@@ -1854,6 +1954,8 @@
}
}
+ dev_dbg(&intf->dev, "%s\n", __FUNCTION__);
+
/* "global suspend" of the downstream HC-to-USB interface */
if (!hdev->parent) {
struct usb_bus *bus = hdev->bus;
@@ -1876,10 +1978,12 @@
static int hub_resume(struct usb_interface *intf)
{
- struct usb_device *hdev = interface_to_usbdev(intf);
struct usb_hub *hub = usb_get_intfdata (intf);
+ struct usb_device *hdev = hub->hdev;
int status;
+ dev_dbg(&intf->dev, "%s\n", __FUNCTION__);
+
/* "global resume" of the downstream HC-to-USB interface */
if (!hdev->parent) {
struct usb_bus *bus = hdev->bus;
@@ -1918,7 +2022,6 @@
{
struct usb_hub *hub = hdev_to_hub(hdev);
- hub->resume_root_hub = 1;
kick_khubd(hub);
}
@@ -2269,7 +2372,7 @@
struct usb_qualifier_descriptor *qual;
int status;
- qual = kmalloc (sizeof *qual, SLAB_KERNEL);
+ qual = kmalloc (sizeof *qual, GFP_KERNEL);
if (qual == NULL)
return;
@@ -2281,7 +2384,7 @@
/* hub LEDs are probably harder to miss than syslog */
if (hub->has_indicators) {
hub->indicator[port1-1] = INDICATOR_GREEN_BLINK;
- schedule_work (&hub->leds);
+ schedule_delayed_work (&hub->leds, 0);
}
}
kfree(qual);
@@ -2455,7 +2558,7 @@
if (hub->has_indicators) {
hub->indicator[port1-1] =
INDICATOR_AMBER_BLINK;
- schedule_work (&hub->leds);
+ schedule_delayed_work (&hub->leds, 0);
}
status = -ENOTCONN; /* Don't retry */
goto loop_disable;
@@ -2555,16 +2658,13 @@
intf = to_usb_interface(hub->intfdev);
hub_dev = &intf->dev;
- i = hub->resume_root_hub;
-
- dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n",
+ dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
hdev->state, hub->descriptor
? hub->descriptor->bNbrPorts
: 0,
/* NOTE: expects max 15 ports... */
(u16) hub->change_bits[0],
- (u16) hub->event_bits[0],
- i ? ", resume root" : "");
+ (u16) hub->event_bits[0]);
usb_get_intf(intf);
spin_unlock_irq(&hub_event_lock);
@@ -2585,16 +2685,16 @@
goto loop;
}
- /* Is this is a root hub wanting to reactivate the downstream
- * ports? If so, be sure the interface resumes even if its
- * stub "device" node was never suspended.
- */
- if (i)
- usb_autoresume_device(hdev, 0);
-
- /* If this is an inactive or suspended hub, do nothing */
- if (hub->quiescing)
+ /* Autoresume */
+ ret = usb_autopm_get_interface(intf);
+ if (ret) {
+ dev_dbg(hub_dev, "Can't autoresume: %d\n", ret);
goto loop;
+ }
+
+ /* If this is an inactive hub, do nothing */
+ if (hub->quiescing)
+ goto loop_autopm;
if (hub->error) {
dev_dbg (hub_dev, "resetting for error %d\n",
@@ -2604,7 +2704,7 @@
if (ret) {
dev_dbg (hub_dev,
"error resetting hub: %d\n", ret);
- goto loop;
+ goto loop_autopm;
}
hub->nerrors = 0;
@@ -2732,6 +2832,10 @@
if (!hdev->parent && !hub->busy_bits[0])
usb_enable_root_hub_irq(hdev->bus);
+loop_autopm:
+ /* Allow autosuspend if we're not going to run again */
+ if (list_empty(&hub->event_list))
+ usb_autopm_enable(intf);
loop:
usb_unlock_device(hdev);
usb_put_intf(intf);
@@ -2773,6 +2877,7 @@
.post_reset = hub_post_reset,
.ioctl = hub_ioctl,
.id_table = hub_id_table,
+ .supports_autosuspend = 1,
};
int usb_hub_init(void)
@@ -2818,7 +2923,7 @@
if (len < le16_to_cpu(udev->config[index].desc.wTotalLength))
len = le16_to_cpu(udev->config[index].desc.wTotalLength);
}
- buf = kmalloc (len, SLAB_KERNEL);
+ buf = kmalloc (len, GFP_KERNEL);
if (buf == NULL) {
dev_err(&udev->dev, "no mem to re-read configs after reset\n");
/* assume the worst */
@@ -2997,7 +3102,7 @@
}
/* Prevent autosuspend during the reset */
- usb_autoresume_device(udev, 1);
+ usb_autoresume_device(udev);
if (iface && iface->condition != USB_INTERFACE_BINDING)
iface = NULL;
@@ -3040,7 +3145,7 @@
}
}
- usb_autosuspend_device(udev, 1);
+ usb_autosuspend_device(udev);
return ret;
}
EXPORT_SYMBOL(usb_reset_composite_device);
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 0f8e82a..cf9559c 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -192,45 +192,4 @@
extern void usb_hub_tt_clear_buffer (struct usb_device *dev, int pipe);
-struct usb_hub {
- struct device *intfdev; /* the "interface" device */
- struct usb_device *hdev;
- struct urb *urb; /* for interrupt polling pipe */
-
- /* buffer for urb ... with extra space in case of babble */
- char (*buffer)[8];
- dma_addr_t buffer_dma; /* DMA address for buffer */
- union {
- struct usb_hub_status hub;
- struct usb_port_status port;
- } *status; /* buffer for status reports */
-
- int error; /* last reported error */
- int nerrors; /* track consecutive errors */
-
- struct list_head event_list; /* hubs w/data or errs ready */
- unsigned long event_bits[1]; /* status change bitmask */
- unsigned long change_bits[1]; /* ports with logical connect
- status change */
- unsigned long busy_bits[1]; /* ports being reset or
- resumed */
-#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
-#error event_bits[] is too short!
-#endif
-
- struct usb_hub_descriptor *descriptor; /* class descriptor */
- struct usb_tt tt; /* Transaction Translator */
-
- unsigned mA_per_port; /* current for each child */
-
- unsigned limited_power:1;
- unsigned quiescing:1;
- unsigned activating:1;
- unsigned resume_root_hub:1;
-
- unsigned has_indicators:1;
- enum hub_led_mode indicator[USB_MAXCHILDREN];
- struct work_struct leds;
-};
-
#endif /* __LINUX_HUB_H */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index fccd195..149aa8b 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -488,7 +488,7 @@
int retval;
io->urbs [i]->dev = io->dev;
- retval = usb_submit_urb (io->urbs [i], SLAB_ATOMIC);
+ retval = usb_submit_urb (io->urbs [i], GFP_ATOMIC);
/* after we submit, let completions or cancelations fire;
* we handshake using io->status.
@@ -764,7 +764,7 @@
err = -EINVAL;
goto errout;
} else {
- dev->have_langid = -1;
+ dev->have_langid = 1;
dev->string_langid = tbuf[2] | (tbuf[3]<< 8);
/* always use the first langid listed */
dev_dbg (&dev->dev, "default language 0x%04x\n",
@@ -828,10 +828,7 @@
* Context: !in_interrupt ()
*
* Updates the copy of the device descriptor stored in the device structure,
- * which dedicates space for this purpose. Note that several fields are
- * converted to the host CPU's byte order: the USB version (bcdUSB), and
- * vendors product and version fields (idVendor, idProduct, and bcdDevice).
- * That lets device drivers compare against non-byteswapped constants.
+ * which dedicates space for this purpose.
*
* Not exported, only for use by the core. If drivers really want to read
* the device descriptor directly, they can call usb_get_descriptor() with
@@ -1401,7 +1398,7 @@
}
/* Wake up the device so we can send it the Set-Config request */
- ret = usb_autoresume_device(dev, 1);
+ ret = usb_autoresume_device(dev);
if (ret)
goto free_interfaces;
@@ -1424,7 +1421,7 @@
dev->actconfig = cp;
if (!cp) {
usb_set_device_state(dev, USB_STATE_ADDRESS);
- usb_autosuspend_device(dev, 1);
+ usb_autosuspend_device(dev);
goto free_interfaces;
}
usb_set_device_state(dev, USB_STATE_CONFIGURED);
@@ -1493,7 +1490,7 @@
usb_create_sysfs_intf_files (intf);
}
- usb_autosuspend_device(dev, 1);
+ usb_autosuspend_device(dev);
return 0;
}
@@ -1504,9 +1501,10 @@
};
/* Worker routine for usb_driver_set_configuration() */
-static void driver_set_config_work(void *_req)
+static void driver_set_config_work(struct work_struct *work)
{
- struct set_config_request *req = _req;
+ struct set_config_request *req =
+ container_of(work, struct set_config_request, work);
usb_lock_device(req->udev);
usb_set_configuration(req->udev, req->config);
@@ -1544,7 +1542,7 @@
return -ENOMEM;
req->udev = udev;
req->config = config;
- INIT_WORK(&req->work, driver_set_config_work, req);
+ INIT_WORK(&req->work, driver_set_config_work);
usb_get_dev(udev);
if (!schedule_work(&req->work)) {
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 467cb02..02426d0 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -200,19 +200,13 @@
destroy_workqueue(ksuspend_usb_wq);
}
-#else
-
-#define ksuspend_usb_init() 0
-#define ksuspend_usb_cleanup() do {} while (0)
-
-#endif
-
#ifdef CONFIG_USB_SUSPEND
/* usb_autosuspend_work - callback routine to autosuspend a USB device */
-static void usb_autosuspend_work(void *_udev)
+static void usb_autosuspend_work(struct work_struct *work)
{
- struct usb_device *udev = _udev;
+ struct usb_device *udev =
+ container_of(work, struct usb_device, autosuspend.work);
usb_pm_lock(udev);
udev->auto_pm = 1;
@@ -222,10 +216,17 @@
#else
-static void usb_autosuspend_work(void *_udev)
+static void usb_autosuspend_work(struct work_struct *work)
{}
-#endif
+#endif /* CONFIG_USB_SUSPEND */
+
+#else
+
+#define ksuspend_usb_init() 0
+#define ksuspend_usb_cleanup() do {} while (0)
+
+#endif /* CONFIG_PM */
/**
* usb_alloc_dev - usb device constructor (usbcore-internal)
@@ -304,7 +305,7 @@
#ifdef CONFIG_PM
mutex_init(&dev->pm_mutex);
- INIT_WORK(&dev->autosuspend, usb_autosuspend_work, dev);
+ INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work);
#endif
return dev;
}
@@ -537,138 +538,6 @@
return usb_hcd_get_frame_number (dev);
}
-/**
- * usb_endpoint_dir_in - check if the endpoint has IN direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type IN, otherwise it returns false.
- */
-int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
-}
-
-/**
- * usb_endpoint_dir_out - check if the endpoint has OUT direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type OUT, otherwise it returns false.
- */
-int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
-}
-
-/**
- * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type bulk, otherwise it returns false.
- */
-int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_BULK);
-}
-
-/**
- * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type interrupt, otherwise it returns
- * false.
- */
-int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_INT);
-}
-
-/**
- * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type isochronous, otherwise it returns
- * false.
- */
-int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_ISOC);
-}
-
-/**
- * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and IN direction,
- * otherwise it returns false.
- */
-int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd));
-}
-
-/**
- * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and OUT direction,
- * otherwise it returns false.
- */
-int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd));
-}
-
-/**
- * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and IN direction,
- * otherwise it returns false.
- */
-int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd));
-}
-
-/**
- * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and OUT direction,
- * otherwise it returns false.
- */
-int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd));
-}
-
-/**
- * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and IN direction,
- * otherwise it returns false.
- */
-int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd));
-}
-
-/**
- * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and OUT direction,
- * otherwise it returns false.
- */
-int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd)
-{
- return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd));
-}
-
/*-------------------------------------------------------------------*/
/*
* __usb_get_extra_descriptor() finds a descriptor of specific type in the
@@ -1102,18 +971,6 @@
EXPORT_SYMBOL(usb_find_device);
EXPORT_SYMBOL(usb_get_current_frame_number);
-EXPORT_SYMBOL_GPL(usb_endpoint_dir_in);
-EXPORT_SYMBOL_GPL(usb_endpoint_dir_out);
-EXPORT_SYMBOL_GPL(usb_endpoint_xfer_bulk);
-EXPORT_SYMBOL_GPL(usb_endpoint_xfer_int);
-EXPORT_SYMBOL_GPL(usb_endpoint_xfer_isoc);
-EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_in);
-EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_out);
-EXPORT_SYMBOL_GPL(usb_endpoint_is_int_in);
-EXPORT_SYMBOL_GPL(usb_endpoint_is_int_out);
-EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_in);
-EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_out);
-
EXPORT_SYMBOL (usb_buffer_alloc);
EXPORT_SYMBOL (usb_buffer_free);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 13322e3..17830a8 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -64,14 +64,13 @@
#define USB_AUTOSUSPEND_DELAY (HZ*2)
-extern void usb_autosuspend_device(struct usb_device *udev, int dec_busy_cnt);
-extern int usb_autoresume_device(struct usb_device *udev, int inc_busy_cnt);
+extern void usb_autosuspend_device(struct usb_device *udev);
+extern int usb_autoresume_device(struct usb_device *udev);
#else
-#define usb_autosuspend_device(udev, dec_busy_cnt) do {} while (0)
-static inline int usb_autoresume_device(struct usb_device *udev,
- int inc_busy_cnt)
+#define usb_autosuspend_device(udev) do {} while (0)
+static inline int usb_autoresume_device(struct usb_device *udev)
{
return 0;
}
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bbbc82a..4097a86 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -189,7 +189,7 @@
config USB_GADGET_AT91
boolean "AT91 USB Device Port"
- depends on ARCH_AT91RM9200
+ depends on ARCH_AT91
select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 1c17d26..d15bf22 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -1833,9 +1833,9 @@
spin_unlock_irqrestore(&dev->req_lock, flags);
}
-static void eth_work (void *_dev)
+static void eth_work (struct work_struct *work)
{
- struct eth_dev *dev = _dev;
+ struct eth_dev *dev = container_of(work, struct eth_dev, work);
if (test_and_clear_bit (WORK_RX_MEMORY, &dev->todo)) {
if (netif_running (dev->net))
@@ -1894,13 +1894,13 @@
if (!eth_is_promisc (dev)) {
u8 *dest = skb->data;
- if (dest [0] & 0x01) {
+ if (is_multicast_ether_addr(dest)) {
u16 type;
/* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
* SET_ETHERNET_MULTICAST_FILTERS requests
*/
- if (memcmp (dest, net->broadcast, ETH_ALEN) == 0)
+ if (is_broadcast_ether_addr(dest))
type = USB_CDC_PACKET_TYPE_BROADCAST;
else
type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
@@ -2398,7 +2398,7 @@
dev = netdev_priv(net);
spin_lock_init (&dev->lock);
spin_lock_init (&dev->req_lock);
- INIT_WORK (&dev->work, eth_work, dev);
+ INIT_WORK (&dev->work, eth_work);
INIT_LIST_HEAD (&dev->tx_reqs);
INIT_LIST_HEAD (&dev->rx_reqs);
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 8b975d1..c98316c 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -250,7 +250,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
-#include <linux/suspend.h>
+#include <linux/freezer.h>
#include <linux/utsname.h>
#include <linux/usb_ch9.h>
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 64554ac..3135182 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -1236,7 +1236,7 @@
/* ok, we made sense of the hardware ... */
- dev = kzalloc(sizeof(*dev), SLAB_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) {
return -ENOMEM;
}
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index a3076da..805a982 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1864,7 +1864,7 @@
}
/* alloc, and start init */
- dev = kmalloc (sizeof *dev, SLAB_KERNEL);
+ dev = kmalloc (sizeof *dev, GFP_KERNEL);
if (dev == NULL){
pr_debug("enomem %s\n", pci_name(pdev));
retval = -ENOMEM;
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 86924f9..3fb1044a 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -412,7 +412,7 @@
/* FIXME readahead for O_NONBLOCK and poll(); careful with ZLPs */
value = -ENOMEM;
- kbuf = kmalloc (len, SLAB_KERNEL);
+ kbuf = kmalloc (len, GFP_KERNEL);
if (unlikely (!kbuf))
goto free1;
@@ -456,7 +456,7 @@
/* FIXME writebehind for O_NONBLOCK and poll(), qlen = 1 */
value = -ENOMEM;
- kbuf = kmalloc (len, SLAB_KERNEL);
+ kbuf = kmalloc (len, GFP_KERNEL);
if (!kbuf)
goto free1;
if (copy_from_user (kbuf, buf, len)) {
@@ -1898,7 +1898,7 @@
buf += 4;
length -= 4;
- kbuf = kmalloc (length, SLAB_KERNEL);
+ kbuf = kmalloc (length, GFP_KERNEL);
if (!kbuf)
return -ENOMEM;
if (copy_from_user (kbuf, buf, length)) {
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 1792596..4a99156 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -83,7 +83,6 @@
static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *);
static int lh7a40x_set_halt(struct usb_ep *ep, int);
static int lh7a40x_fifo_status(struct usb_ep *ep);
-static int lh7a40x_fifo_status(struct usb_ep *ep);
static void lh7a40x_fifo_flush(struct usb_ep *ep);
static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep);
static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr);
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3acc896..3024c67 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -1040,6 +1040,7 @@
} /* else the irq handler advances the queue. */
+ ep->responded = 1;
if (req)
list_add_tail (&req->queue, &ep->queue);
done:
@@ -2188,7 +2189,8 @@
ep->stopped = 1;
set_halt (ep);
mode = 2;
- } else if (!req && !ep->stopped)
+ } else if (ep->responded &&
+ !req && !ep->stopped)
write_fifo (ep, NULL);
}
} else {
@@ -2203,7 +2205,7 @@
} else if (((t & (1 << DATA_OUT_PING_TOKEN_INTERRUPT))
&& req
&& req->req.actual == req->req.length)
- || !req) {
+ || (ep->responded && !req)) {
ep->dev->protocol_stall = 1;
set_halt (ep);
ep->stopped = 1;
@@ -2469,6 +2471,7 @@
/* we made the hardware handle most lowlevel requests;
* everything else goes uplevel to the gadget code.
*/
+ ep->responded = 1;
switch (u.r.bRequest) {
case USB_REQ_GET_STATUS: {
struct net2280_ep *e;
@@ -2537,6 +2540,7 @@
u.r.bRequestType, u.r.bRequest,
w_value, w_index, w_length,
readl (&ep->regs->ep_cfg));
+ ep->responded = 0;
spin_unlock (&dev->lock);
tmp = dev->driver->setup (&dev->gadget, &u.r);
spin_lock (&dev->lock);
@@ -2857,7 +2861,7 @@
}
/* alloc, and start init */
- dev = kzalloc (sizeof *dev, SLAB_KERNEL);
+ dev = kzalloc (sizeof *dev, GFP_KERNEL);
if (dev == NULL){
retval = -ENOMEM;
goto done;
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
index 957d6df..44ca139 100644
--- a/drivers/usb/gadget/net2280.h
+++ b/drivers/usb/gadget/net2280.h
@@ -110,7 +110,8 @@
out_overflow : 1,
stopped : 1,
is_in : 1,
- is_iso : 1;
+ is_iso : 1,
+ responded : 1;
};
static inline void allow_status (struct net2280_ep *ep)
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 48a09fd..030d87c 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -2581,7 +2581,7 @@
/* UDC_PULLUP_EN gates the chip clock */
// OTG_SYSCON_1_REG |= DEV_IDLE_EN;
- udc = kzalloc(sizeof(*udc), SLAB_KERNEL);
+ udc = kzalloc(sizeof(*udc), GFP_KERNEL);
if (!udc)
return -ENOMEM;
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 671c24b..1ed506e 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -2472,6 +2472,7 @@
#define PXA210_B1 0x00000123
#define PXA210_B0 0x00000122
#define IXP425_A0 0x000001c1
+#define IXP425_B0 0x000001f1
#define IXP465_AD 0x00000200
/*
@@ -2509,6 +2510,7 @@
break;
#elif defined(CONFIG_ARCH_IXP4XX)
case IXP425_A0:
+ case IXP425_B0:
case IXP465_AD:
dev->has_cfr = 1;
out_dma = 0;
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 0f809dd..40710ea 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -1190,7 +1190,7 @@
/* ok, we made sense of the hardware ... */
- dev = kzalloc(sizeof(*dev), SLAB_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
spin_lock_init (&dev->lock);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index cf10cbc..cc60759 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -153,7 +153,7 @@
adapter will *NOT* work with PC cards that do not contain an OHCI
controller.
- For those PC cards that contain multiple OHCI controllers only ther
+ For those PC cards that contain multiple OHCI controllers only the
first one is used.
The driver consists of two modules, the "ftdi-elan" module is a
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 34b7a31..56349d2 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -492,7 +492,7 @@
unsigned i;
__le32 tag;
- if (!(seen = kmalloc (DBG_SCHED_LIMIT * sizeof *seen, SLAB_ATOMIC)))
+ if (!(seen = kmalloc (DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC)))
return 0;
seen_count = 0;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 9030994..025d333 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -126,6 +126,11 @@
module_param (park, uint, S_IRUGO);
MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
+/* for flakey hardware, ignore overcurrent indicators */
+static int ignore_oc = 0;
+module_param (ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
+
#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
/*-------------------------------------------------------------------------*/
@@ -541,9 +546,10 @@
temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
ehci_info (ehci,
- "USB %x.%x started, EHCI %x.%02x, driver %s\n",
+ "USB %x.%x started, EHCI %x.%02x, driver %s%s\n",
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
- temp >> 8, temp & 0xff, DRIVER_VERSION);
+ temp >> 8, temp & 0xff, DRIVER_VERSION,
+ ignore_oc ? ", overcurrent ignored" : "");
writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */
@@ -613,9 +619,8 @@
unsigned i = HCS_N_PORTS (ehci->hcs_params);
/* resume root hub? */
- status = readl (&ehci->regs->command);
- if (!(status & CMD_RUN))
- writel (status | CMD_RUN, &ehci->regs->command);
+ if (!(readl(&ehci->regs->command) & CMD_RUN))
+ usb_hcd_resume_root_hub(hcd);
while (i--) {
int pstatus = readl (&ehci->regs->port_status [i]);
@@ -632,7 +637,6 @@
*/
ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
- usb_hcd_resume_root_hub(hcd);
}
}
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 1b20722..bfe5f30 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -34,6 +34,7 @@
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
int port;
+ int mask;
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
@@ -51,14 +52,25 @@
ehci->reclaim_ready = 1;
ehci_work(ehci);
- /* suspend any active/unsuspended ports, maybe allow wakeup */
+ /* Unlike other USB host controller types, EHCI doesn't have
+ * any notion of "global" or bus-wide suspend. The driver has
+ * to manually suspend all the active unsuspended ports, and
+ * then manually resume them in the bus_resume() routine.
+ */
+ ehci->bus_suspended = 0;
while (port--) {
u32 __iomem *reg = &ehci->regs->port_status [port];
u32 t1 = readl (reg) & ~PORT_RWC_BITS;
u32 t2 = t1;
- if ((t1 & PORT_PE) && !(t1 & PORT_OWNER))
+ /* keep track of which ports we suspend */
+ if ((t1 & PORT_PE) && !(t1 & PORT_OWNER) &&
+ !(t1 & PORT_SUSPEND)) {
t2 |= PORT_SUSPEND;
+ set_bit(port, &ehci->bus_suspended);
+ }
+
+ /* enable remote wakeup on all ports */
if (device_may_wakeup(&hcd->self.root_hub->dev))
t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
else
@@ -76,6 +88,13 @@
ehci_halt (ehci);
hcd->state = HC_STATE_SUSPENDED;
+ /* allow remote wakeup */
+ mask = INTR_MASK;
+ if (!device_may_wakeup(&hcd->self.root_hub->dev))
+ mask &= ~STS_PCD;
+ writel(mask, &ehci->regs->intr_enable);
+ readl(&ehci->regs->intr_enable);
+
ehci->next_statechange = jiffies + msecs_to_jiffies(10);
spin_unlock_irq (&ehci->lock);
return 0;
@@ -88,7 +107,6 @@
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp;
int i;
- int intr_enable;
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
@@ -100,31 +118,30 @@
* the last user of the controller, not reset/pm hardware keeping
* state we gave to it.
*/
+ temp = readl(&ehci->regs->intr_enable);
+ ehci_dbg(ehci, "resume root hub%s\n", temp ? "" : " after power loss");
- /* re-init operational registers in case we lost power */
- if (readl (&ehci->regs->intr_enable) == 0) {
- /* at least some APM implementations will try to deliver
- * IRQs right away, so delay them until we're ready.
- */
- intr_enable = 1;
- writel (0, &ehci->regs->segment);
- writel (ehci->periodic_dma, &ehci->regs->frame_list);
- writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next);
- } else
- intr_enable = 0;
- ehci_dbg(ehci, "resume root hub%s\n",
- intr_enable ? " after power loss" : "");
+ /* at least some APM implementations will try to deliver
+ * IRQs right away, so delay them until we're ready.
+ */
+ writel(0, &ehci->regs->intr_enable);
+
+ /* re-init operational registers */
+ writel(0, &ehci->regs->segment);
+ writel(ehci->periodic_dma, &ehci->regs->frame_list);
+ writel((u32) ehci->async->qh_dma, &ehci->regs->async_next);
/* restore CMD_RUN, framelist size, and irq threshold */
writel (ehci->command, &ehci->regs->command);
- /* take ports out of suspend */
+ /* manually resume the ports we suspended during bus_suspend() */
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
temp = readl (&ehci->regs->port_status [i]);
temp &= ~(PORT_RWC_BITS
| PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
- if (temp & PORT_SUSPEND) {
+ if (test_bit(i, &ehci->bus_suspended) &&
+ (temp & PORT_SUSPEND)) {
ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
temp |= PORT_RESUME;
}
@@ -134,11 +151,12 @@
mdelay (20);
while (i--) {
temp = readl (&ehci->regs->port_status [i]);
- if ((temp & PORT_SUSPEND) == 0)
- continue;
- temp &= ~(PORT_RWC_BITS | PORT_RESUME);
- writel (temp, &ehci->regs->port_status [i]);
- ehci_vdbg (ehci, "resumed port %d\n", i + 1);
+ if (test_bit(i, &ehci->bus_suspended) &&
+ (temp & PORT_SUSPEND)) {
+ temp &= ~(PORT_RWC_BITS | PORT_RESUME);
+ writel (temp, &ehci->regs->port_status [i]);
+ ehci_vdbg (ehci, "resumed port %d\n", i + 1);
+ }
}
(void) readl (&ehci->regs->command);
@@ -157,8 +175,7 @@
hcd->state = HC_STATE_RUNNING;
/* Now we can safely re-enable irqs */
- if (intr_enable)
- writel (INTR_MASK, &ehci->regs->intr_enable);
+ writel(INTR_MASK, &ehci->regs->intr_enable);
spin_unlock_irq (&ehci->lock);
return 0;
@@ -218,6 +235,7 @@
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp, status = 0;
+ u32 mask;
int ports, i, retval = 1;
unsigned long flags;
@@ -233,6 +251,18 @@
retval++;
}
+ /* Some boards (mostly VIA?) report bogus overcurrent indications,
+ * causing massive log spam unless we completely ignore them. It
+ * may be relevant that VIA VT8235 controlers, where PORT_POWER is
+ * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+ * PORT_POWER; that's surprising, but maybe within-spec.
+ */
+ if (!ignore_oc)
+ mask = PORT_CSC | PORT_PEC | PORT_OCC;
+ else
+ mask = PORT_CSC | PORT_PEC;
+ // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
+
/* no hub change reports (bit 0) for now (power, ...) */
/* port N changes (bit N)? */
@@ -250,8 +280,7 @@
}
if (!(temp & PORT_CONNECT))
ehci->reset_done [i] = 0;
- if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0
- // PORT_STAT_C_SUSPEND?
+ if ((temp & mask) != 0
|| ((temp & PORT_RESUME) != 0
&& time_after (jiffies,
ehci->reset_done [i]))) {
@@ -319,6 +348,7 @@
u32 temp, status;
unsigned long flags;
int retval = 0;
+ unsigned selector;
/*
* FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
@@ -417,7 +447,7 @@
status |= 1 << USB_PORT_FEAT_C_CONNECTION;
if (temp & PORT_PEC)
status |= 1 << USB_PORT_FEAT_C_ENABLE;
- if (temp & PORT_OCC)
+ if ((temp & PORT_OCC) && !ignore_oc)
status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
/* whoever resumes must GetPortStatus to complete it!! */
@@ -506,6 +536,8 @@
}
break;
case SetPortFeature:
+ selector = wIndex >> 8;
+ wIndex &= 0xff;
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
@@ -559,6 +591,22 @@
}
writel (temp, &ehci->regs->port_status [wIndex]);
break;
+
+ /* For downstream facing ports (these): one hub port is put
+ * into test mode according to USB2 11.24.2.13, then the hub
+ * must be reset (which for root hub now means rmmod+modprobe,
+ * or else system reboot). See EHCI 2.3.9 and 4.14 for info
+ * about the EHCI-specific stuff.
+ */
+ case USB_PORT_FEAT_TEST:
+ if (!selector || selector > 5)
+ goto error;
+ ehci_quiesce(ehci);
+ ehci_halt(ehci);
+ temp |= selector << 16;
+ writel (temp, &ehci->regs->port_status [wIndex]);
+ break;
+
default:
goto error;
}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index e51c1ed8..4bc7970 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -257,9 +257,7 @@
static int ehci_pci_resume(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- unsigned port;
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
- int retval = -EINVAL;
// maybe restore FLADJ
@@ -269,27 +267,19 @@
/* Mark hardware accessible again as we are out of D3 state by now */
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- /* If CF is clear, we lost PCI Vaux power and need to restart. */
- if (readl(&ehci->regs->configured_flag) != FLAG_CF)
- goto restart;
-
- /* If any port is suspended (or owned by the companion),
- * we know we can/must resume the HC (and mustn't reset it).
- * We just defer that to the root hub code.
+ /* If CF is still set, we maintained PCI Vaux power.
+ * Just undo the effect of ehci_pci_suspend().
*/
- for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
- u32 status;
- port--;
- status = readl(&ehci->regs->port_status [port]);
- if (!(status & PORT_POWER))
- continue;
- if (status & (PORT_SUSPEND | PORT_RESUME | PORT_OWNER)) {
- usb_hcd_resume_root_hub(hcd);
- return 0;
- }
+ if (readl(&ehci->regs->configured_flag) == FLAG_CF) {
+ int mask = INTR_MASK;
+
+ if (!device_may_wakeup(&hcd->self.root_hub->dev))
+ mask &= ~STS_PCD;
+ writel(mask, &ehci->regs->intr_enable);
+ readl(&ehci->regs->intr_enable);
+ return 0;
}
-restart:
ehci_dbg(ehci, "lost power, restarting\n");
usb_root_hub_lost_power(hcd->self.root_hub);
@@ -307,13 +297,15 @@
ehci_work(ehci);
spin_unlock_irq(&ehci->lock);
- /* restart; khubd will disconnect devices */
- retval = ehci_run(hcd);
-
/* here we "know" root ports should always stay powered */
ehci_port_power(ehci, 1);
- return retval;
+ writel(ehci->command, &ehci->regs->command);
+ writel(FLAG_CF, &ehci->regs->configured_flag);
+ readl(&ehci->regs->command); /* unblock posted writes */
+
+ hcd->state = HC_STATE_SUSPENDED;
+ return 0;
}
#endif
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bbc3082..74dbc6c 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -74,6 +74,7 @@
/* per root hub port */
unsigned long reset_done [EHCI_MAX_ROOT_PORTS];
+ unsigned long bus_suspended;
/* per-HC memory pools (could be per-bus, but ...) */
struct dma_pool *qh_pool; /* qh per active urb */
diff --git a/drivers/usb/host/hc_crisv10.c b/drivers/usb/host/hc_crisv10.c
index 87eca6a..9325e46 100644
--- a/drivers/usb/host/hc_crisv10.c
+++ b/drivers/usb/host/hc_crisv10.c
@@ -188,7 +188,7 @@
#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \
{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);}
-#define SLAB_FLAG (in_interrupt() ? SLAB_ATOMIC : SLAB_KERNEL)
+#define SLAB_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL)
#define KMALLOC_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL)
/* Most helpful debugging aid */
@@ -275,13 +275,13 @@
static int zout_buffer[4] __attribute__ ((aligned (4)));
/* Cache for allocating new EP and SB descriptors. */
-static kmem_cache_t *usb_desc_cache;
+static struct kmem_cache *usb_desc_cache;
/* Cache for the registers allocated in the top half. */
-static kmem_cache_t *top_half_reg_cache;
+static struct kmem_cache *top_half_reg_cache;
/* Cache for the data allocated in the isoc descr top half. */
-static kmem_cache_t *isoc_compl_cache;
+static struct kmem_cache *isoc_compl_cache;
static struct usb_bus *etrax_usb_bus;
@@ -1743,7 +1743,7 @@
*R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do);
- comp_data = (usb_isoc_complete_data_t*)kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC);
+ comp_data = (usb_isoc_complete_data_t*)kmem_cache_alloc(isoc_compl_cache, GFP_ATOMIC);
assert(comp_data != NULL);
INIT_WORK(&comp_data->usb_bh, etrax_usb_isoc_descr_interrupt_bottom_half, comp_data);
@@ -3010,7 +3010,7 @@
if (!urb->iso_frame_desc[i].length)
continue;
- next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_ATOMIC);
+ next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, GFP_ATOMIC);
assert(next_sb_desc != NULL);
if (urb->iso_frame_desc[i].length > 0) {
@@ -3063,7 +3063,7 @@
if (TxIsocEPList[epid].sub == 0) {
dbg_isoc("Isoc traffic not already running, allocating SB");
- next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_ATOMIC);
+ next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, GFP_ATOMIC);
assert(next_sb_desc != NULL);
next_sb_desc->command = (IO_STATE(USB_SB_command, tt, in) |
@@ -3317,7 +3317,7 @@
restore_flags(flags);
- reg = (usb_interrupt_registers_t *)kmem_cache_alloc(top_half_reg_cache, SLAB_ATOMIC);
+ reg = (usb_interrupt_registers_t *)kmem_cache_alloc(top_half_reg_cache, GFP_ATOMIC);
assert(reg != NULL);
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 8293c1d..0f47a57 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -505,7 +505,7 @@
char *next;
unsigned i;
- if (!(seen = kmalloc (DBG_SCHED_LIMIT * sizeof *seen, SLAB_ATOMIC)))
+ if (!(seen = kmalloc (DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC)))
return 0;
seen_count = 0;
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 9be6b30..b28a9b6 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -715,13 +715,6 @@
return IRQ_NOTMINE;
}
- if (ints & OHCI_INTR_RHSC) {
- ohci_vdbg (ohci, "rhsc\n");
- ohci->next_statechange = jiffies + STATECHANGE_DELAY;
- ohci_writel (ohci, OHCI_INTR_RHSC, ®s->intrstatus);
- usb_hcd_poll_rh_status(hcd);
- }
-
if (ints & OHCI_INTR_UE) {
disable (ohci);
ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
@@ -731,9 +724,31 @@
ohci_usb_reset (ohci);
}
- if (ints & OHCI_INTR_RD) {
- ohci_vdbg (ohci, "resume detect\n");
- ohci_writel (ohci, OHCI_INTR_RD, ®s->intrstatus);
+ if (ints & OHCI_INTR_RHSC) {
+ ohci_vdbg(ohci, "rhsc\n");
+ ohci->next_statechange = jiffies + STATECHANGE_DELAY;
+ ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC,
+ ®s->intrstatus);
+
+ /* NOTE: Vendors didn't always make the same implementation
+ * choices for RHSC. Many followed the spec; RHSC triggers
+ * on an edge, like setting and maybe clearing a port status
+ * change bit. With others it's level-triggered, active
+ * until khubd clears all the port status change bits. We'll
+ * always disable it here and rely on polling until khubd
+ * re-enables it.
+ */
+ ohci_writel(ohci, OHCI_INTR_RHSC, ®s->intrdisable);
+ usb_hcd_poll_rh_status(hcd);
+ }
+
+ /* For connect and disconnect events, we expect the controller
+ * to turn on RHSC along with RD. But for remote wakeup events
+ * this might not happen.
+ */
+ else if (ints & OHCI_INTR_RD) {
+ ohci_vdbg(ohci, "resume detect\n");
+ ohci_writel(ohci, OHCI_INTR_RD, ®s->intrstatus);
hcd->poll_rh = 1;
if (ohci->autostop) {
spin_lock (&ohci->lock);
@@ -930,7 +945,7 @@
#include "ohci-ppc-soc.c"
#endif
-#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261)
+#ifdef CONFIG_ARCH_AT91
#include "ohci-at91.c"
#endif
@@ -947,8 +962,7 @@
|| defined (CONFIG_ARCH_EP93XX) \
|| defined (CONFIG_SOC_AU1X00) \
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
- || defined (CONFIG_ARCH_AT91RM9200) \
- || defined (CONFIG_ARCH_AT91SAM9261) \
+ || defined (CONFIG_ARCH_AT91) \
|| defined (CONFIG_ARCH_PNX4008) \
)
#error "missing bus glue for ohci-hcd"
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 6f11359..2441642 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -41,7 +41,11 @@
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+ spin_lock_irq(&ohci->lock);
+ if (!ohci->autostop)
+ del_timer(&hcd->rh_timer); /* Prevent next poll */
+ ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+ spin_unlock_irq(&ohci->lock);
}
#define OHCI_SCHED_ENABLES \
@@ -50,6 +54,9 @@
static void dl_done_list (struct ohci_hcd *);
static void finish_unlinks (struct ohci_hcd *, u16);
+#ifdef CONFIG_PM
+static int ohci_restart(struct ohci_hcd *ohci);
+
static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
__releases(ohci->lock)
__acquires(ohci->lock)
@@ -132,8 +139,6 @@
return ed;
}
-static int ohci_restart (struct ohci_hcd *ohci);
-
/* caller has locked the root hub */
static int ohci_rh_resume (struct ohci_hcd *ohci)
__releases(ohci->lock)
@@ -169,7 +174,8 @@
break;
case OHCI_USB_RESUME:
/* HCFS changes sometime after INTR_RD */
- ohci_info (ohci, "wakeup\n");
+ ohci_dbg(ohci, "%swakeup root hub\n",
+ autostopped ? "auto-" : "");
break;
case OHCI_USB_OPER:
/* this can happen after resuming a swsusp snapshot */
@@ -180,7 +186,6 @@
ohci_dbg (ohci, "lost power\n");
status = -EBUSY;
}
-#ifdef CONFIG_PM
if (status == -EBUSY) {
if (!autostopped) {
spin_unlock_irq (&ohci->lock);
@@ -190,25 +195,12 @@
}
return status;
}
-#endif
if (status != -EINPROGRESS)
return status;
if (autostopped)
goto skip_resume;
spin_unlock_irq (&ohci->lock);
- temp = ohci->num_ports;
- while (temp--) {
- u32 stat = ohci_readl (ohci,
- &ohci->regs->roothub.portstatus [temp]);
-
- /* force global, not selective, resume */
- if (!(stat & RH_PS_PSS))
- continue;
- ohci_writel (ohci, RH_PS_POCI,
- &ohci->regs->roothub.portstatus [temp]);
- }
-
/* Some controllers (lucent erratum) need extra-long delays */
msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
@@ -216,6 +208,7 @@
temp &= OHCI_CTRL_HCFS;
if (temp != OHCI_USB_RESUME) {
ohci_err (ohci, "controller won't resume\n");
+ spin_lock_irq(&ohci->lock);
return -EBUSY;
}
@@ -295,8 +288,6 @@
return 0;
}
-#ifdef CONFIG_PM
-
static int ohci_bus_suspend (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
@@ -334,6 +325,83 @@
return rc;
}
+/* Carry out polling-, autostop-, and autoresume-related state changes */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+ int any_connected)
+{
+ int poll_rh = 1;
+
+ switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+
+ case OHCI_USB_OPER:
+ /* keep on polling until we know a device is connected
+ * and RHSC is enabled */
+ if (!ohci->autostop) {
+ if (any_connected ||
+ !device_may_wakeup(&ohci_to_hcd(ohci)
+ ->self.root_hub->dev)) {
+ if (ohci_readl(ohci, &ohci->regs->intrenable) &
+ OHCI_INTR_RHSC)
+ poll_rh = 0;
+ } else {
+ ohci->autostop = 1;
+ ohci->next_statechange = jiffies + HZ;
+ }
+
+ /* if no devices have been attached for one second, autostop */
+ } else {
+ if (changed || any_connected) {
+ ohci->autostop = 0;
+ ohci->next_statechange = jiffies +
+ STATECHANGE_DELAY;
+ } else if (time_after_eq(jiffies,
+ ohci->next_statechange)
+ && !ohci->ed_rm_list
+ && !(ohci->hc_control &
+ OHCI_SCHED_ENABLES)) {
+ ohci_rh_suspend(ohci, 1);
+ }
+ }
+ break;
+
+ /* if there is a port change, autostart or ask to be resumed */
+ case OHCI_USB_SUSPEND:
+ case OHCI_USB_RESUME:
+ if (changed) {
+ if (ohci->autostop)
+ ohci_rh_resume(ohci);
+ else
+ usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
+ } else {
+ /* everything is idle, no need for polling */
+ poll_rh = 0;
+ }
+ break;
+ }
+ return poll_rh;
+}
+
+#else /* CONFIG_PM */
+
+static inline int ohci_rh_resume(struct ohci_hcd *ohci)
+{
+ return 0;
+}
+
+/* Carry out polling-related state changes.
+ * autostop isn't used when CONFIG_PM is turned off.
+ */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+ int any_connected)
+{
+ int poll_rh = 1;
+
+ /* keep on polling until RHSC is enabled */
+ if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
+ poll_rh = 0;
+ return poll_rh;
+}
+
#endif /* CONFIG_PM */
/*-------------------------------------------------------------------------*/
@@ -345,7 +413,7 @@
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int i, changed = 0, length = 1;
- int any_connected = 0, rhsc_enabled = 1;
+ int any_connected = 0;
unsigned long flags;
spin_lock_irqsave (&ohci->lock, flags);
@@ -386,66 +454,8 @@
}
}
- /* NOTE: vendors didn't always make the same implementation
- * choices for RHSC. Sometimes it triggers on an edge (like
- * setting and maybe clearing a port status change bit); and
- * it's level-triggered on other silicon, active until khubd
- * clears all active port status change bits. If it's still
- * set (level-triggered) we must disable it and rely on
- * polling until khubd re-enables it.
- */
- if (ohci_readl (ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC) {
- ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable);
- (void) ohci_readl (ohci, &ohci->regs->intrdisable);
- rhsc_enabled = 0;
- }
- hcd->poll_rh = 1;
-
- /* carry out appropriate state changes */
- switch (ohci->hc_control & OHCI_CTRL_HCFS) {
-
- case OHCI_USB_OPER:
- /* keep on polling until we know a device is connected
- * and RHSC is enabled */
- if (!ohci->autostop) {
- if (any_connected) {
- if (rhsc_enabled)
- hcd->poll_rh = 0;
- } else {
- ohci->autostop = 1;
- ohci->next_statechange = jiffies + HZ;
- }
-
- /* if no devices have been attached for one second, autostop */
- } else {
- if (changed || any_connected) {
- ohci->autostop = 0;
- ohci->next_statechange = jiffies +
- STATECHANGE_DELAY;
- } else if (time_after_eq (jiffies,
- ohci->next_statechange)
- && !ohci->ed_rm_list
- && !(ohci->hc_control &
- OHCI_SCHED_ENABLES)) {
- ohci_rh_suspend (ohci, 1);
- }
- }
- break;
-
- /* if there is a port change, autostart or ask to be resumed */
- case OHCI_USB_SUSPEND:
- case OHCI_USB_RESUME:
- if (changed) {
- if (ohci->autostop)
- ohci_rh_resume (ohci);
- else
- usb_hcd_resume_root_hub (hcd);
- } else {
- /* everything is idle, no need for polling */
- hcd->poll_rh = 0;
- }
- break;
- }
+ hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed,
+ any_connected);
done:
spin_unlock_irqrestore (&ohci->lock, flags);
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 2dbb774..7f26f9b 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -134,7 +134,7 @@
{
struct i2c_client *c;
- c = (struct i2c_client *)kzalloc(sizeof(*c), SLAB_KERNEL);
+ c = (struct i2c_client *)kzalloc(sizeof(*c), GFP_KERNEL);
if (!c)
return -ENOMEM;
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 54f554e..ac9f11d 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -169,21 +169,14 @@
DBG(0, "sl811_cs_config(0x%p)\n", link);
- tuple.DesiredTuple = CISTPL_CONFIG;
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
- CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
- link->conf.ConfigBase = parse.config.base;
- link->conf.Present = parse.config.rmask[0];
-
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo,
pcmcia_get_configuration_info(link, &conf));
+ tuple.Attributes = 0;
+ tuple.TupleData = buf;
+ tuple.TupleDataMax = sizeof(buf);
+ tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
while (1) {
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 32c635e..a9d7119 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -71,7 +71,7 @@
module_param(distrust_firmware, bool, 0);
MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren"
"t setup");
-DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait);
+static DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait);
/*
* u132_module_lock exists to protect access to global variables
*
@@ -163,7 +163,7 @@
u16 queue_next;
struct urb *urb_list[ENDP_QUEUE_SIZE];
struct list_head urb_more;
- struct work_struct scheduler;
+ struct delayed_work scheduler;
};
struct u132_ring {
unsigned in_use:1;
@@ -171,7 +171,7 @@
u8 number;
struct u132 *u132;
struct u132_endp *curr_endp;
- struct work_struct scheduler;
+ struct delayed_work scheduler;
};
#define OHCI_QUIRK_AMD756 0x01
#define OHCI_QUIRK_SUPERIO 0x02
@@ -198,20 +198,16 @@
u32 hc_roothub_portstatus[MAX_ROOT_PORTS];
int flags;
unsigned long next_statechange;
- struct work_struct monitor;
+ struct delayed_work monitor;
int num_endpoints;
struct u132_addr addr[MAX_U132_ADDRS];
struct u132_udev udev[MAX_U132_UDEVS];
struct u132_port port[MAX_U132_PORTS];
struct u132_endp *endp[MAX_U132_ENDPS];
};
-int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data);
-int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, u8 addressofs,
- u8 width, u32 *data);
-int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, u8 addressofs,
- u8 width, u32 data);
+
/*
-* these can not be inlines because we need the structure offset!!
+* these cannot be inlines because we need the structure offset!!
* Does anyone have a better way?????
*/
#define u132_read_pcimem(u132, member, data) \
@@ -314,7 +310,7 @@
if (delta > 0) {
if (queue_delayed_work(workqueue, &ring->scheduler, delta))
return;
- } else if (queue_work(workqueue, &ring->scheduler))
+ } else if (queue_delayed_work(workqueue, &ring->scheduler, 0))
return;
kref_put(&u132->kref, u132_hcd_delete);
return;
@@ -393,12 +389,8 @@
static void u132_endp_queue_work(struct u132 *u132, struct u132_endp *endp,
unsigned int delta)
{
- if (delta > 0) {
- if (queue_delayed_work(workqueue, &endp->scheduler, delta))
- kref_get(&endp->kref);
- } else if (queue_work(workqueue, &endp->scheduler))
- kref_get(&endp->kref);
- return;
+ if (queue_delayed_work(workqueue, &endp->scheduler, delta))
+ kref_get(&endp->kref);
}
static void u132_endp_cancel_work(struct u132 *u132, struct u132_endp *endp)
@@ -414,24 +406,14 @@
static void u132_monitor_queue_work(struct u132 *u132, unsigned int delta)
{
- if (delta > 0) {
- if (queue_delayed_work(workqueue, &u132->monitor, delta)) {
- kref_get(&u132->kref);
- }
- } else if (queue_work(workqueue, &u132->monitor))
- kref_get(&u132->kref);
- return;
+ if (queue_delayed_work(workqueue, &u132->monitor, delta))
+ kref_get(&u132->kref);
}
static void u132_monitor_requeue_work(struct u132 *u132, unsigned int delta)
{
- if (delta > 0) {
- if (queue_delayed_work(workqueue, &u132->monitor, delta))
- return;
- } else if (queue_work(workqueue, &u132->monitor))
- return;
- kref_put(&u132->kref, u132_hcd_delete);
- return;
+ if (!queue_delayed_work(workqueue, &u132->monitor, delta))
+ kref_put(&u132->kref, u132_hcd_delete);
}
static void u132_monitor_cancel_work(struct u132 *u132)
@@ -493,9 +475,9 @@
return 0;
}
-static void u132_hcd_monitor_work(void *data)
+static void u132_hcd_monitor_work(struct work_struct *work)
{
- struct u132 *u132 = data;
+ struct u132 *u132 = container_of(work, struct u132, monitor.work);
if (u132->going > 1) {
dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
, u132->going);
@@ -1319,15 +1301,14 @@
}
}
-static void u132_hcd_ring_work_scheduler(void *data);
-static void u132_hcd_endp_work_scheduler(void *data);
/*
* this work function is only executed from the work queue
*
*/
-static void u132_hcd_ring_work_scheduler(void *data)
+static void u132_hcd_ring_work_scheduler(struct work_struct *work)
{
- struct u132_ring *ring = data;
+ struct u132_ring *ring =
+ container_of(work, struct u132_ring, scheduler.work);
struct u132 *u132 = ring->u132;
down(&u132->scheduler_lock);
if (ring->in_use) {
@@ -1386,10 +1367,11 @@
}
}
-static void u132_hcd_endp_work_scheduler(void *data)
+static void u132_hcd_endp_work_scheduler(struct work_struct *work)
{
struct u132_ring *ring;
- struct u132_endp *endp = data;
+ struct u132_endp *endp =
+ container_of(work, struct u132_endp, scheduler.work);
struct u132 *u132 = endp->u132;
down(&u132->scheduler_lock);
ring = endp->ring;
@@ -1947,7 +1929,7 @@
if (!endp) {
return -ENOMEM;
}
- INIT_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler, (void *)endp);
+ INIT_DELAYED_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler);
spin_lock_init(&endp->queue_lock.slock);
INIT_LIST_HEAD(&endp->urb_more);
ring = endp->ring = &u132->ring[0];
@@ -2036,7 +2018,7 @@
if (!endp) {
return -ENOMEM;
}
- INIT_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler, (void *)endp);
+ INIT_DELAYED_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler);
spin_lock_init(&endp->queue_lock.slock);
INIT_LIST_HEAD(&endp->urb_more);
endp->dequeueing = 0;
@@ -2121,7 +2103,7 @@
if (!endp) {
return -ENOMEM;
}
- INIT_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler, (void *)endp);
+ INIT_DELAYED_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler);
spin_lock_init(&endp->queue_lock.slock);
INIT_LIST_HEAD(&endp->urb_more);
ring = endp->ring = &u132->ring[0];
@@ -3045,7 +3027,7 @@
* This function may be called by the USB core whilst the "usb_all_devices_rwsem"
* is held for writing, thus this module must not call usb_remove_hcd()
* synchronously - but instead should immediately stop activity to the
-* device and ansynchronously call usb_remove_hcd()
+* device and asynchronously call usb_remove_hcd()
*/
static int __devexit u132_remove(struct platform_device *pdev)
{
@@ -3100,10 +3082,10 @@
ring->number = rings + 1;
ring->length = 0;
ring->curr_endp = NULL;
- INIT_WORK(&ring->scheduler, u132_hcd_ring_work_scheduler,
- (void *)ring);
+ INIT_DELAYED_WORK(&ring->scheduler,
+ u132_hcd_ring_work_scheduler);
} down(&u132->sw_lock);
- INIT_WORK(&u132->monitor, u132_hcd_monitor_work, (void *)u132);
+ INIT_DELAYED_WORK(&u132->monitor, u132_hcd_monitor_work);
while (ports-- > 0) {
struct u132_port *port = &u132->port[ports];
port->u132 = u132;
@@ -3241,7 +3223,7 @@
#define u132_resume NULL
#endif
/*
-* this driver is loaded explicitely by ftdi_u132
+* this driver is loaded explicitly by ftdi_u132
*
* the platform_driver struct is static because it is per type of module
*/
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 226bf3d..e87692c 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -81,7 +81,7 @@
static char *errbuf;
#define ERRBUF_LEN (32 * 1024)
-static kmem_cache_t *uhci_up_cachep; /* urb_priv */
+static struct kmem_cache *uhci_up_cachep; /* urb_priv */
static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state);
static void wakeup_rh(struct uhci_hcd *uhci);
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 06115f2..30b8845 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -498,7 +498,7 @@
{
struct urb_priv *urbp;
- urbp = kmem_cache_alloc(uhci_up_cachep, SLAB_ATOMIC);
+ urbp = kmem_cache_alloc(uhci_up_cachep, GFP_ATOMIC);
if (!urbp)
return NULL;
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 3038ed0..8ccddf7 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -796,7 +796,7 @@
new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL);
if (!new_desc->context.scsi_status)
- goto out_kfree2;
+ goto out_free_urb;
new_desc->usb_dev = dev;
new_desc->usb_intf = intf;
@@ -822,18 +822,20 @@
new_desc->host = scsi_host_alloc(&mts_scsi_host_template,
sizeof(new_desc));
if (!new_desc->host)
- goto out_free_urb;
+ goto out_kfree2;
new_desc->host->hostdata[0] = (unsigned long)new_desc;
if (scsi_add_host(new_desc->host, NULL)) {
err_retval = -EIO;
- goto out_free_urb;
+ goto out_host_put;
}
scsi_scan_host(new_desc->host);
usb_set_intfdata(intf, new_desc);
return 0;
+ out_host_put:
+ scsi_host_put(new_desc->host);
out_kfree2:
kfree(new_desc->context.scsi_status);
out_free_urb:
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 20db364..661af7a 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -221,6 +221,7 @@
- ITM
- some other eTurboTouch
- Gunze AHL61
+ - DMC TSC-10/25
Have a look at <http://linux.chapter7.ch/touchkit/> for
a usage description and the required user-space stuff.
@@ -258,6 +259,11 @@
bool "Gunze AHL61 device support" if EMBEDDED
depends on USB_TOUCHSCREEN
+config USB_TOUCHSCREEN_DMC_TSC10
+ default y
+ bool "DMC TSC-10/25 device support" if EMBEDDED
+ depends on USB_TOUCHSCREEN
+
config USB_YEALINK
tristate "Yealink usb-p1k voip phone"
depends on USB && INPUT && EXPERIMENTAL
diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c
index 0096373..909138e 100644
--- a/drivers/usb/input/acecad.c
+++ b/drivers/usb/input/acecad.c
@@ -152,7 +152,7 @@
if (!acecad || !input_dev)
goto fail1;
- acecad->data = usb_buffer_alloc(dev, 8, SLAB_KERNEL, &acecad->data_dma);
+ acecad->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &acecad->data_dma);
if (!acecad->data)
goto fail1;
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
index bf42818..9f52429 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/usb/input/aiptek.c
@@ -1988,7 +1988,7 @@
goto fail1;
aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH,
- SLAB_ATOMIC, &aiptek->data_dma);
+ GFP_ATOMIC, &aiptek->data_dma);
if (!aiptek->data)
goto fail1;
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index f659f30..b724e36 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -592,7 +592,7 @@
__FUNCTION__, urb->status);
}
- retval = usb_submit_urb(urb, SLAB_ATOMIC);
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
__FUNCTION__, retval);
@@ -604,12 +604,12 @@
static int ati_remote_alloc_buffers(struct usb_device *udev,
struct ati_remote *ati_remote)
{
- ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
+ ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC,
&ati_remote->inbuf_dma);
if (!ati_remote->inbuf)
return -1;
- ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
+ ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC,
&ati_remote->outbuf_dma);
if (!ati_remote->outbuf)
return -1;
@@ -630,19 +630,14 @@
*/
static void ati_remote_free_buffers(struct ati_remote *ati_remote)
{
- if (ati_remote->irq_urb)
- usb_free_urb(ati_remote->irq_urb);
+ usb_free_urb(ati_remote->irq_urb);
+ usb_free_urb(ati_remote->out_urb);
- if (ati_remote->out_urb)
- usb_free_urb(ati_remote->out_urb);
+ usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
+ ati_remote->inbuf, ati_remote->inbuf_dma);
- if (ati_remote->inbuf)
- usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
- ati_remote->inbuf, ati_remote->inbuf_dma);
-
- if (ati_remote->outbuf)
- usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
- ati_remote->inbuf, ati_remote->outbuf_dma);
+ usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
+ ati_remote->outbuf, ati_remote->outbuf_dma);
}
static void ati_remote_input_init(struct ati_remote *ati_remote)
diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c
index f982a2b..83f1f79 100644
--- a/drivers/usb/input/ati_remote2.c
+++ b/drivers/usb/input/ati_remote2.c
@@ -372,8 +372,7 @@
int i;
for (i = 0; i < 2; i++) {
- if (ar2->urb[i])
- usb_free_urb(ar2->urb[i]);
+ usb_free_urb(ar2->urb[i]);
if (ar2->buf[i])
usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 6095d9c..0811c39 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -968,20 +968,30 @@
hid_io_error(hid);
}
-/* Workqueue routine to reset the device */
-static void hid_reset(void *_hid)
+/* Workqueue routine to reset the device or clear a halt */
+static void hid_reset(struct work_struct *work)
{
- struct hid_device *hid = (struct hid_device *) _hid;
- int rc_lock, rc;
+ struct hid_device *hid =
+ container_of(work, struct hid_device, reset_work);
+ int rc_lock, rc = 0;
- dev_dbg(&hid->intf->dev, "resetting device\n");
- rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf);
- if (rc_lock >= 0) {
- rc = usb_reset_composite_device(hid->dev, hid->intf);
- if (rc_lock)
- usb_unlock_device(hid->dev);
+ if (test_bit(HID_CLEAR_HALT, &hid->iofl)) {
+ dev_dbg(&hid->intf->dev, "clear halt\n");
+ rc = usb_clear_halt(hid->dev, hid->urbin->pipe);
+ clear_bit(HID_CLEAR_HALT, &hid->iofl);
+ hid_start_in(hid);
}
- clear_bit(HID_RESET_PENDING, &hid->iofl);
+
+ else if (test_bit(HID_RESET_PENDING, &hid->iofl)) {
+ dev_dbg(&hid->intf->dev, "resetting device\n");
+ rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf);
+ if (rc_lock >= 0) {
+ rc = usb_reset_composite_device(hid->dev, hid->intf);
+ if (rc_lock)
+ usb_unlock_device(hid->dev);
+ }
+ clear_bit(HID_RESET_PENDING, &hid->iofl);
+ }
switch (rc) {
case 0:
@@ -1023,9 +1033,8 @@
/* Retries failed, so do a port reset */
if (!test_and_set_bit(HID_RESET_PENDING, &hid->iofl)) {
- if (schedule_work(&hid->reset_work))
- goto done;
- clear_bit(HID_RESET_PENDING, &hid->iofl);
+ schedule_work(&hid->reset_work);
+ goto done;
}
}
@@ -1049,6 +1058,11 @@
hid->retry_delay = 0;
hid_input_report(HID_INPUT_REPORT, urb, 1);
break;
+ case -EPIPE: /* stall */
+ clear_bit(HID_IN_RUNNING, &hid->iofl);
+ set_bit(HID_CLEAR_HALT, &hid->iofl);
+ schedule_work(&hid->reset_work);
+ return;
case -ECONNRESET: /* unlink */
case -ENOENT:
case -ESHUTDOWN: /* unplug */
@@ -1065,7 +1079,7 @@
warn("input irq status %d received", urb->status);
}
- status = usb_submit_urb(urb, SLAB_ATOMIC);
+ status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
clear_bit(HID_IN_RUNNING, &hid->iofl);
if (status != -EPERM) {
@@ -1627,6 +1641,19 @@
#define USB_VENDOR_ID_APPLE 0x05ac
#define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304
+#define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e
+#define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO 0x020f
+#define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214
+#define USB_DEVICE_ID_APPLE_GEYSER_ISO 0x0215
+#define USB_DEVICE_ID_APPLE_GEYSER_JIS 0x0216
+#define USB_DEVICE_ID_APPLE_GEYSER3_ANSI 0x0217
+#define USB_DEVICE_ID_APPLE_GEYSER3_ISO 0x0218
+#define USB_DEVICE_ID_APPLE_GEYSER3_JIS 0x0219
+#define USB_DEVICE_ID_APPLE_GEYSER4_ANSI 0x021a
+#define USB_DEVICE_ID_APPLE_GEYSER4_ISO 0x021b
+#define USB_DEVICE_ID_APPLE_GEYSER4_JIS 0x021c
+#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a
+#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b
#define USB_VENDOR_ID_CHERRY 0x046a
#define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023
@@ -1797,16 +1824,19 @@
{ USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION },
- { USB_VENDOR_ID_APPLE, 0x020E, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, 0x020F, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, 0x0214, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, 0x0215, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, 0x0216, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, 0x0217, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, 0x0218, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, 0x0219, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, 0x030A, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, 0x030B, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN },
{ USB_VENDOR_ID_PANJIT, 0x0001, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE },
@@ -1839,13 +1869,13 @@
static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid)
{
- if (!(hid->inbuf = usb_buffer_alloc(dev, hid->bufsize, SLAB_ATOMIC, &hid->inbuf_dma)))
+ if (!(hid->inbuf = usb_buffer_alloc(dev, hid->bufsize, GFP_ATOMIC, &hid->inbuf_dma)))
return -1;
- if (!(hid->outbuf = usb_buffer_alloc(dev, hid->bufsize, SLAB_ATOMIC, &hid->outbuf_dma)))
+ if (!(hid->outbuf = usb_buffer_alloc(dev, hid->bufsize, GFP_ATOMIC, &hid->outbuf_dma)))
return -1;
- if (!(hid->cr = usb_buffer_alloc(dev, sizeof(*(hid->cr)), SLAB_ATOMIC, &hid->cr_dma)))
+ if (!(hid->cr = usb_buffer_alloc(dev, sizeof(*(hid->cr)), GFP_ATOMIC, &hid->cr_dma)))
return -1;
- if (!(hid->ctrlbuf = usb_buffer_alloc(dev, hid->bufsize, SLAB_ATOMIC, &hid->ctrlbuf_dma)))
+ if (!(hid->ctrlbuf = usb_buffer_alloc(dev, hid->bufsize, GFP_ATOMIC, &hid->ctrlbuf_dma)))
return -1;
return 0;
@@ -1989,7 +2019,7 @@
if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0)
interval = hid_mousepoll_interval;
- if (endpoint->bEndpointAddress & USB_DIR_IN) {
+ if (usb_endpoint_dir_in(endpoint)) {
if (hid->urbin)
continue;
if (!(hid->urbin = usb_alloc_urb(0, GFP_KERNEL)))
@@ -2019,7 +2049,7 @@
init_waitqueue_head(&hid->wait);
- INIT_WORK(&hid->reset_work, hid_reset, hid);
+ INIT_WORK(&hid->reset_work, hid_reset);
setup_timer(&hid->io_retry, hid_retry_timeout, (unsigned long) hid);
spin_lock_init(&hid->inlock);
@@ -2071,13 +2101,9 @@
return hid;
fail:
-
- if (hid->urbin)
- usb_free_urb(hid->urbin);
- if (hid->urbout)
- usb_free_urb(hid->urbout);
- if (hid->urbctrl)
- usb_free_urb(hid->urbctrl);
+ usb_free_urb(hid->urbin);
+ usb_free_urb(hid->urbout);
+ usb_free_urb(hid->urbctrl);
hid_free_buffers(dev, hid);
hid_free_device(hid);
@@ -2108,8 +2134,7 @@
usb_free_urb(hid->urbin);
usb_free_urb(hid->urbctrl);
- if (hid->urbout)
- usb_free_urb(hid->urbout);
+ usb_free_urb(hid->urbout);
hid_free_buffers(hid->dev, hid);
hid_free_device(hid);
diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c
index c8ce65c..3a7e5fb 100644
--- a/drivers/usb/input/hid-input.c
+++ b/drivers/usb/input/hid-input.c
@@ -121,6 +121,12 @@
{ }
};
+static struct hidinput_key_translation powerbook_iso_keyboard[] = {
+ { KEY_GRAVE, KEY_102ND },
+ { KEY_102ND, KEY_GRAVE },
+ { }
+};
+
static int usbhid_pb_fnmode = 1;
module_param_named(pb_fnmode, usbhid_pb_fnmode, int, 0644);
MODULE_PARM_DESC(pb_fnmode,
@@ -195,6 +201,14 @@
}
}
+ if (hid->quirks & HID_QUIRK_POWERBOOK_ISO_KEYBOARD) {
+ trans = find_translation(powerbook_iso_keyboard, usage->code);
+ if (trans) {
+ input_event(input, usage->type, trans->to, value);
+ return 1;
+ }
+ }
+
return 0;
}
@@ -210,6 +224,9 @@
for (trans = powerbook_numlock_keys; trans->from; trans++)
set_bit(trans->to, input->keybit);
+
+ for (trans = powerbook_iso_keyboard; trans->from; trans++)
+ set_bit(trans->to, input->keybit);
}
#else
static inline int hidinput_pb_event(struct hid_device *hid, struct input_dev *input,
diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h
index 8aa9ec0..76ad68d 100644
--- a/drivers/usb/input/hid.h
+++ b/drivers/usb/input/hid.h
@@ -260,7 +260,8 @@
#define HID_QUIRK_POWERBOOK_HAS_FN 0x00001000
#define HID_QUIRK_POWERBOOK_FN_ON 0x00002000
#define HID_QUIRK_INVERT_HWHEEL 0x00004000
-#define HID_QUIRK_BAD_RELATIVE_KEYS 0x00008000
+#define HID_QUIRK_POWERBOOK_ISO_KEYBOARD 0x00008000
+#define HID_QUIRK_BAD_RELATIVE_KEYS 0x00010000
/*
* This is the global environment of the parser. This information is
@@ -385,6 +386,7 @@
#define HID_IN_RUNNING 3
#define HID_RESET_PENDING 4
#define HID_SUSPENDED 5
+#define HID_CLEAR_HALT 6
struct hid_input {
struct list_head list;
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c
index 50aa810..98bd323 100644
--- a/drivers/usb/input/keyspan_remote.c
+++ b/drivers/usb/input/keyspan_remote.c
@@ -456,7 +456,7 @@
remote->in_endpoint = endpoint;
remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */
- remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma);
+ remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma);
if (!remote->in_buffer) {
retval = -ENOMEM;
goto fail1;
diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c
index 79a85d4..92c4e07 100644
--- a/drivers/usb/input/mtouchusb.c
+++ b/drivers/usb/input/mtouchusb.c
@@ -164,7 +164,7 @@
dbg("%s - called", __FUNCTION__);
mtouch->data = usb_buffer_alloc(udev, MTOUCHUSB_REPORT_DATA_SIZE,
- SLAB_ATOMIC, &mtouch->data_dma);
+ GFP_ATOMIC, &mtouch->data_dma);
if (!mtouch->data)
return -1;
diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c
index 0bf9177..fea97e5 100644
--- a/drivers/usb/input/powermate.c
+++ b/drivers/usb/input/powermate.c
@@ -277,12 +277,12 @@
static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_device *pm)
{
pm->data = usb_buffer_alloc(udev, POWERMATE_PAYLOAD_SIZE_MAX,
- SLAB_ATOMIC, &pm->data_dma);
+ GFP_ATOMIC, &pm->data_dma);
if (!pm->data)
return -1;
pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)),
- SLAB_ATOMIC, &pm->configcr_dma);
+ GFP_ATOMIC, &pm->configcr_dma);
if (!pm->configcr)
return -1;
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
index 05c0d1c..2a314b0 100644
--- a/drivers/usb/input/touchkitusb.c
+++ b/drivers/usb/input/touchkitusb.c
@@ -248,7 +248,7 @@
struct touchkit_usb *touchkit)
{
touchkit->data = usb_buffer_alloc(udev, TOUCHKIT_REPORT_DATA_SIZE,
- SLAB_ATOMIC, &touchkit->data_dma);
+ GFP_ATOMIC, &touchkit->data_dma);
if (!touchkit->data)
return -1;
diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c
index c73285c..8505824 100644
--- a/drivers/usb/input/usbkbd.c
+++ b/drivers/usb/input/usbkbd.c
@@ -122,7 +122,7 @@
memcpy(kbd->old, kbd->new, 8);
resubmit:
- i = usb_submit_urb (urb, SLAB_ATOMIC);
+ i = usb_submit_urb (urb, GFP_ATOMIC);
if (i)
err ("can't resubmit intr, %s-%s/input0, status %d",
kbd->usbdev->bus->bus_name,
@@ -196,11 +196,11 @@
return -1;
if (!(kbd->led = usb_alloc_urb(0, GFP_KERNEL)))
return -1;
- if (!(kbd->new = usb_buffer_alloc(dev, 8, SLAB_ATOMIC, &kbd->new_dma)))
+ if (!(kbd->new = usb_buffer_alloc(dev, 8, GFP_ATOMIC, &kbd->new_dma)))
return -1;
- if (!(kbd->cr = usb_buffer_alloc(dev, sizeof(struct usb_ctrlrequest), SLAB_ATOMIC, &kbd->cr_dma)))
+ if (!(kbd->cr = usb_buffer_alloc(dev, sizeof(struct usb_ctrlrequest), GFP_ATOMIC, &kbd->cr_dma)))
return -1;
- if (!(kbd->leds = usb_buffer_alloc(dev, 1, SLAB_ATOMIC, &kbd->leds_dma)))
+ if (!(kbd->leds = usb_buffer_alloc(dev, 1, GFP_ATOMIC, &kbd->leds_dma)))
return -1;
return 0;
@@ -208,10 +208,8 @@
static void usb_kbd_free_mem(struct usb_device *dev, struct usb_kbd *kbd)
{
- if (kbd->irq)
- usb_free_urb(kbd->irq);
- if (kbd->led)
- usb_free_urb(kbd->led);
+ usb_free_urb(kbd->irq);
+ usb_free_urb(kbd->led);
if (kbd->new)
usb_buffer_free(dev, 8, kbd->new, kbd->new_dma);
if (kbd->cr)
@@ -236,9 +234,7 @@
return -ENODEV;
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & USB_DIR_IN))
- return -ENODEV;
- if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
+ if (!usb_endpoint_is_int_in(endpoint))
return -ENODEV;
pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c
index cbbbea3..64a33e4 100644
--- a/drivers/usb/input/usbmouse.c
+++ b/drivers/usb/input/usbmouse.c
@@ -86,7 +86,7 @@
input_sync(dev);
resubmit:
- status = usb_submit_urb (urb, SLAB_ATOMIC);
+ status = usb_submit_urb (urb, GFP_ATOMIC);
if (status)
err ("can't resubmit intr, %s-%s/input0, status %d",
mouse->usbdev->bus->bus_name,
@@ -126,9 +126,7 @@
return -ENODEV;
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & USB_DIR_IN))
- return -ENODEV;
- if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
+ if (!usb_endpoint_is_int_in(endpoint))
return -ENODEV;
pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
@@ -139,7 +137,7 @@
if (!mouse || !input_dev)
goto fail1;
- mouse->data = usb_buffer_alloc(dev, 8, SLAB_ATOMIC, &mouse->data_dma);
+ mouse->data = usb_buffer_alloc(dev, 8, GFP_ATOMIC, &mouse->data_dma);
if (!mouse->data)
goto fail1;
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
index 933cedd..7f3c57d 100644
--- a/drivers/usb/input/usbtouchscreen.c
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -8,6 +8,7 @@
* - PanJit TouchSet
* - eTurboTouch
* - Gunze AHL61
+ * - DMC TSC-10/25
*
* Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -30,6 +31,8 @@
* - ITM parts are from itmtouch.c
* - 3M parts are from mtouchusb.c
* - PanJit parts are from an unmerged driver by Lanslott Gish
+ * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged
+ * driver from Marius Vollmer
*
*****************************************************************************/
@@ -44,7 +47,7 @@
#include <linux/usb/input.h>
-#define DRIVER_VERSION "v0.4"
+#define DRIVER_VERSION "v0.5"
#define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>"
#define DRIVER_DESC "USB Touchscreen Driver"
@@ -103,6 +106,7 @@
DEVTYPE_ITM,
DEVTYPE_ETURBO,
DEVTYPE_GUNZE,
+ DEVTYPE_DMC_TSC10,
};
static struct usb_device_id usbtouch_devices[] = {
@@ -139,6 +143,10 @@
{USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
#endif
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+ {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
+#endif
+
{}
};
@@ -313,6 +321,80 @@
#endif
/*****************************************************************************
+ * DMC TSC-10/25 Part
+ *
+ * Documentation about the controller and it's protocol can be found at
+ * http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
+ * http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+
+/* supported data rates. currently using 130 */
+#define TSC10_RATE_POINT 0x50
+#define TSC10_RATE_30 0x40
+#define TSC10_RATE_50 0x41
+#define TSC10_RATE_80 0x42
+#define TSC10_RATE_100 0x43
+#define TSC10_RATE_130 0x44
+#define TSC10_RATE_150 0x45
+
+/* commands */
+#define TSC10_CMD_RESET 0x55
+#define TSC10_CMD_RATE 0x05
+#define TSC10_CMD_DATA1 0x01
+
+static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
+{
+ struct usb_device *dev = usbtouch->udev;
+ int ret;
+ unsigned char buf[2];
+
+ /* reset */
+ buf[0] = buf[1] = 0xFF;
+ ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ TSC10_CMD_RESET,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ return ret;
+ if (buf[0] != 0x06 || buf[1] != 0x00)
+ return -ENODEV;
+
+ /* set coordinate output rate */
+ buf[0] = buf[1] = 0xFF;
+ ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ TSC10_CMD_RATE,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ return ret;
+ if (buf[0] != 0x06 || buf[1] != 0x00)
+ return -ENODEV;
+
+ /* start sending data */
+ ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ TSC10_CMD_DATA1,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+
+static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+ *x = ((pkt[2] & 0x03) << 8) | pkt[1];
+ *y = ((pkt[4] & 0x03) << 8) | pkt[3];
+ *touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
* the different device descriptors
*/
static struct usbtouch_device_info usbtouch_dev_info[] = {
@@ -389,6 +471,18 @@
.read_data = gunze_read_data,
},
#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+ [DEVTYPE_DMC_TSC10] = {
+ .min_xc = 0x0,
+ .max_xc = 0x03ff,
+ .min_yc = 0x0,
+ .max_yc = 0x03ff,
+ .rept_size = 5,
+ .init = dmc_tsc10_init,
+ .read_data = dmc_tsc10_read_data,
+ },
+#endif
};
@@ -586,7 +680,7 @@
type->process_pkt = usbtouch_process_pkt;
usbtouch->data = usb_buffer_alloc(udev, type->rept_size,
- SLAB_KERNEL, &usbtouch->data_dma);
+ GFP_KERNEL, &usbtouch->data_dma);
if (!usbtouch->data)
goto out_free;
diff --git a/drivers/usb/input/wacom.h b/drivers/usb/input/wacom.h
index 1cf08f0..d85abfc 100644
--- a/drivers/usb/input/wacom.h
+++ b/drivers/usb/input/wacom.h
@@ -110,7 +110,6 @@
};
extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
-extern void wacom_sys_irq(struct urb *urb);
extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data);
extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data);
extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data);
diff --git a/drivers/usb/input/wacom_sys.c b/drivers/usb/input/wacom_sys.c
index 3498b89..e7cc20a 100644
--- a/drivers/usb/input/wacom_sys.c
+++ b/drivers/usb/input/wacom_sys.c
@@ -42,7 +42,7 @@
return wcombo->wacom->dev;
}
-void wacom_sys_irq(struct urb *urb)
+static void wacom_sys_irq(struct urb *urb)
{
struct wacom *wacom = urb->context;
struct wacom_combo wcombo;
diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c
index df97e5c..e4bc76e 100644
--- a/drivers/usb/input/xpad.c
+++ b/drivers/usb/input/xpad.c
@@ -325,7 +325,7 @@
goto fail1;
xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN,
- SLAB_ATOMIC, &xpad->idata_dma);
+ GFP_ATOMIC, &xpad->idata_dma);
if (!xpad->idata)
goto fail1;
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
index 905bf63..caff8e6 100644
--- a/drivers/usb/input/yealink.c
+++ b/drivers/usb/input/yealink.c
@@ -859,10 +859,8 @@
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & USB_DIR_IN))
- return -EIO;
- if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
- return -EIO;
+ if (!usb_endpoint_is_int_in(endpoint))
+ return -ENODEV;
yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL);
if (!yld)
@@ -876,17 +874,17 @@
/* allocate usb buffers */
yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN,
- SLAB_ATOMIC, &yld->irq_dma);
+ GFP_ATOMIC, &yld->irq_dma);
if (yld->irq_data == NULL)
return usb_cleanup(yld, -ENOMEM);
yld->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN,
- SLAB_ATOMIC, &yld->ctl_dma);
+ GFP_ATOMIC, &yld->ctl_dma);
if (!yld->ctl_data)
return usb_cleanup(yld, -ENOMEM);
yld->ctl_req = usb_buffer_alloc(udev, sizeof(*(yld->ctl_req)),
- SLAB_ATOMIC, &yld->ctl_req_dma);
+ GFP_ATOMIC, &yld->ctl_req_dma);
if (yld->ctl_req == NULL)
return usb_cleanup(yld, -ENOMEM);
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 11dc595..2cba07d 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -4,6 +4,7 @@
#
obj-$(CONFIG_USB_ADUTUX) += adutux.o
+obj-$(CONFIG_USB_APPLEDISPLAY) += appledisplay.o
obj-$(CONFIG_USB_AUERSWALD) += auerswald.o
obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
obj-$(CONFIG_USB_CYTHERM) += cytherm.o
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 6b23a1d..02cbb7f 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -76,7 +76,7 @@
char *urbdata; /* interrupt URB data buffer */
char *msgdata; /* control message data buffer */
- struct work_struct work;
+ struct delayed_work work;
int button_pressed;
spinlock_t lock;
};
@@ -117,7 +117,7 @@
case ACD_BTN_BRIGHT_UP:
case ACD_BTN_BRIGHT_DOWN:
pdata->button_pressed = 1;
- queue_work(wq, &pdata->work);
+ queue_delayed_work(wq, &pdata->work, 0);
break;
case ACD_BTN_NONE:
default:
@@ -184,9 +184,10 @@
.max_brightness = 0xFF
};
-static void appledisplay_work(void *private)
+static void appledisplay_work(struct work_struct *work)
{
- struct appledisplay *pdata = private;
+ struct appledisplay *pdata =
+ container_of(work, struct appledisplay, work.work);
int retval;
up(&pdata->bd->sem);
@@ -216,10 +217,7 @@
iface_desc = iface->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
endpoint = &iface_desc->endpoint[i].desc;
- if (!int_in_endpointAddr &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_INT)) {
+ if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) {
/* we found an interrupt in endpoint */
int_in_endpointAddr = endpoint->bEndpointAddress;
break;
@@ -241,7 +239,7 @@
pdata->udev = udev;
spin_lock_init(&pdata->lock);
- INIT_WORK(&pdata->work, appledisplay_work, pdata);
+ INIT_DELAYED_WORK(&pdata->work, appledisplay_work);
/* Allocate buffer for control messages */
pdata->msgdata = kmalloc(ACD_MSG_BUFFER_LEN, GFP_KERNEL);
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index 0be9d62..c703f73 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -704,9 +704,7 @@
{
kfree(bp->bufp);
kfree(bp->dr);
- if (bp->urbp) {
- usb_free_urb(bp->urbp);
- }
+ usb_free_urb(bp->urbp);
kfree(bp);
}
@@ -780,7 +778,7 @@
bl_fail:/* not enough memory. Free allocated elements */
dbg ("auerbuf_setup: no more memory");
- kfree(bep);
+ auerbuf_free(bep);
auerbuf_free_buffers (bcp);
return -ENOMEM;
}
@@ -1155,8 +1153,7 @@
dbg ("auerswald_int_release");
/* stop the int endpoint */
- if (cp->inturbp)
- usb_kill_urb (cp->inturbp);
+ usb_kill_urb (cp->inturbp);
/* deallocate memory */
auerswald_int_free (cp);
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 1fd9cb8..5c0a26c 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -53,13 +53,12 @@
static int emi26_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request)
{
int result;
- unsigned char *buffer = kmalloc (length, GFP_KERNEL);
+ unsigned char *buffer = kmemdup(data, length, GFP_KERNEL);
if (!buffer) {
err("emi26: kmalloc(%d) failed.", length);
return -ENOMEM;
}
- memcpy (buffer, data, length);
/* Note: usb_control_msg returns negative value on error or length of the
* data that was written! */
result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300);
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index fe35137..23153ea 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -61,13 +61,12 @@
static int emi62_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request)
{
int result;
- unsigned char *buffer = kmalloc (length, GFP_KERNEL);
+ unsigned char *buffer = kmemdup(data, length, GFP_KERNEL);
if (!buffer) {
err("emi62: kmalloc(%d) failed.", length);
return -ENOMEM;
}
- memcpy (buffer, data, length);
/* Note: usb_control_msg returns negative value on error or length of the
* data that was written! */
result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300);
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 9b591b8..18b1925 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -156,9 +156,9 @@
struct usb_device *udev;
struct usb_interface *interface;
struct usb_class_driver *class;
- struct work_struct status_work;
- struct work_struct command_work;
- struct work_struct respond_work;
+ struct delayed_work status_work;
+ struct delayed_work command_work;
+ struct delayed_work respond_work;
struct u132_platform_data platform_data;
struct resource resources[0];
struct platform_device platform_dev;
@@ -210,23 +210,14 @@
static void ftdi_status_requeue_work(struct usb_ftdi *ftdi, unsigned int delta)
{
- if (delta > 0) {
- if (queue_delayed_work(status_queue, &ftdi->status_work, delta))
- return;
- } else if (queue_work(status_queue, &ftdi->status_work))
- return;
- kref_put(&ftdi->kref, ftdi_elan_delete);
- return;
+ if (!queue_delayed_work(status_queue, &ftdi->status_work, delta))
+ kref_put(&ftdi->kref, ftdi_elan_delete);
}
static void ftdi_status_queue_work(struct usb_ftdi *ftdi, unsigned int delta)
{
- if (delta > 0) {
- if (queue_delayed_work(status_queue, &ftdi->status_work, delta))
- kref_get(&ftdi->kref);
- } else if (queue_work(status_queue, &ftdi->status_work))
- kref_get(&ftdi->kref);
- return;
+ if (queue_delayed_work(status_queue, &ftdi->status_work, delta))
+ kref_get(&ftdi->kref);
}
static void ftdi_status_cancel_work(struct usb_ftdi *ftdi)
@@ -237,25 +228,14 @@
static void ftdi_command_requeue_work(struct usb_ftdi *ftdi, unsigned int delta)
{
- if (delta > 0) {
- if (queue_delayed_work(command_queue, &ftdi->command_work,
- delta))
- return;
- } else if (queue_work(command_queue, &ftdi->command_work))
- return;
- kref_put(&ftdi->kref, ftdi_elan_delete);
- return;
+ if (!queue_delayed_work(command_queue, &ftdi->command_work, delta))
+ kref_put(&ftdi->kref, ftdi_elan_delete);
}
static void ftdi_command_queue_work(struct usb_ftdi *ftdi, unsigned int delta)
{
- if (delta > 0) {
- if (queue_delayed_work(command_queue, &ftdi->command_work,
- delta))
- kref_get(&ftdi->kref);
- } else if (queue_work(command_queue, &ftdi->command_work))
- kref_get(&ftdi->kref);
- return;
+ if (queue_delayed_work(command_queue, &ftdi->command_work, delta))
+ kref_get(&ftdi->kref);
}
static void ftdi_command_cancel_work(struct usb_ftdi *ftdi)
@@ -267,25 +247,14 @@
static void ftdi_response_requeue_work(struct usb_ftdi *ftdi,
unsigned int delta)
{
- if (delta > 0) {
- if (queue_delayed_work(respond_queue, &ftdi->respond_work,
- delta))
- return;
- } else if (queue_work(respond_queue, &ftdi->respond_work))
- return;
- kref_put(&ftdi->kref, ftdi_elan_delete);
- return;
+ if (!queue_delayed_work(respond_queue, &ftdi->respond_work, delta))
+ kref_put(&ftdi->kref, ftdi_elan_delete);
}
static void ftdi_respond_queue_work(struct usb_ftdi *ftdi, unsigned int delta)
{
- if (delta > 0) {
- if (queue_delayed_work(respond_queue, &ftdi->respond_work,
- delta))
- kref_get(&ftdi->kref);
- } else if (queue_work(respond_queue, &ftdi->respond_work))
- kref_get(&ftdi->kref);
- return;
+ if (queue_delayed_work(respond_queue, &ftdi->respond_work, delta))
+ kref_get(&ftdi->kref);
}
static void ftdi_response_cancel_work(struct usb_ftdi *ftdi)
@@ -303,7 +272,7 @@
EXPORT_SYMBOL_GPL(ftdi_elan_gone_away);
-void ftdi_release_platform_dev(struct device *dev)
+static void ftdi_release_platform_dev(struct device *dev)
{
dev->parent = NULL;
}
@@ -475,9 +444,11 @@
return;
}
-static void ftdi_elan_command_work(void *data)
+static void ftdi_elan_command_work(struct work_struct *work)
{
- struct usb_ftdi *ftdi = data;
+ struct usb_ftdi *ftdi =
+ container_of(work, struct usb_ftdi, command_work.work);
+
if (ftdi->disconnected > 0) {
ftdi_elan_put_kref(ftdi);
return;
@@ -500,9 +471,10 @@
return;
}
-static void ftdi_elan_respond_work(void *data)
+static void ftdi_elan_respond_work(struct work_struct *work)
{
- struct usb_ftdi *ftdi = data;
+ struct usb_ftdi *ftdi =
+ container_of(work, struct usb_ftdi, respond_work.work);
if (ftdi->disconnected > 0) {
ftdi_elan_put_kref(ftdi);
return;
@@ -534,9 +506,10 @@
* after the FTDI has been synchronized
*
*/
-static void ftdi_elan_status_work(void *data)
+static void ftdi_elan_status_work(struct work_struct *work)
{
- struct usb_ftdi *ftdi = data;
+ struct usb_ftdi *ftdi =
+ container_of(work, struct usb_ftdi, status_work.work);
int work_delay_in_msec = 0;
if (ftdi->disconnected > 0) {
ftdi_elan_put_kref(ftdi);
@@ -1426,14 +1399,6 @@
}
}
-int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data)
-{
- struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
- return ftdi_elan_read_reg(ftdi, data);
-}
-
-
-EXPORT_SYMBOL_GPL(usb_ftdi_elan_read_reg);
static int ftdi_elan_read_config(struct usb_ftdi *ftdi, int config_offset,
u8 width, u32 *data)
{
@@ -2633,10 +2598,7 @@
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
if (!ftdi->bulk_in_endpointAddr &&
- ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
- == USB_DIR_IN) && ((endpoint->bmAttributes &
- USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK))
- {
+ usb_endpoint_is_bulk_in(endpoint)) {
buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
ftdi->bulk_in_size = buffer_size;
ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress;
@@ -2649,10 +2611,7 @@
}
}
if (!ftdi->bulk_out_endpointAddr &&
- ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
- == USB_DIR_OUT) && ((endpoint->bmAttributes &
- USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK))
- {
+ usb_endpoint_is_bulk_out(endpoint)) {
ftdi->bulk_out_endpointAddr =
endpoint->bEndpointAddress;
}
@@ -2691,12 +2650,9 @@
ftdi->class = NULL;
dev_info(&ftdi->udev->dev, "USB FDTI=%p ELAN interface %d now a"
"ctivated\n", ftdi, iface_desc->desc.bInterfaceNumber);
- INIT_WORK(&ftdi->status_work, ftdi_elan_status_work,
- (void *)ftdi);
- INIT_WORK(&ftdi->command_work, ftdi_elan_command_work,
- (void *)ftdi);
- INIT_WORK(&ftdi->respond_work, ftdi_elan_respond_work,
- (void *)ftdi);
+ INIT_DELAYED_WORK(&ftdi->status_work, ftdi_elan_status_work);
+ INIT_DELAYED_WORK(&ftdi->command_work, ftdi_elan_command_work);
+ INIT_DELAYED_WORK(&ftdi->respond_work, ftdi_elan_respond_work);
ftdi_status_queue_work(ftdi, msecs_to_jiffies(3 *1000));
return 0;
} else {
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 8e6e195..c941853 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -125,12 +125,12 @@
static int idmouse_create_image(struct usb_idmouse *dev)
{
- int bytes_read = 0;
- int bulk_read = 0;
- int result = 0;
+ int bytes_read;
+ int bulk_read;
+ int result;
memcpy(dev->bulk_in_buffer, HEADER, sizeof(HEADER)-1);
- bytes_read += sizeof(HEADER)-1;
+ bytes_read = sizeof(HEADER)-1;
/* reset the device and set a fast blink rate */
result = ftip_command(dev, FTIP_RELEASE, 0, 0);
@@ -208,9 +208,9 @@
static int idmouse_open(struct inode *inode, struct file *file)
{
- struct usb_idmouse *dev = NULL;
+ struct usb_idmouse *dev;
struct usb_interface *interface;
- int result = 0;
+ int result;
/* prevent disconnects */
mutex_lock(&disconnect_mutex);
@@ -305,7 +305,7 @@
loff_t * ppos)
{
struct usb_idmouse *dev;
- int result = 0;
+ int result;
dev = (struct usb_idmouse *) file->private_data;
@@ -329,7 +329,7 @@
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
- struct usb_idmouse *dev = NULL;
+ struct usb_idmouse *dev;
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
int result;
@@ -350,11 +350,7 @@
/* set up the endpoint information - use only the first bulk-in endpoint */
endpoint = &iface_desc->endpoint[0].desc;
- if (!dev->bulk_in_endpointAddr
- && (endpoint->bEndpointAddress & USB_DIR_IN)
- && ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_BULK)) {
-
+ if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) {
/* we found a bulk in endpoint */
dev->orig_bi_size = le16_to_cpu(endpoint->wMaxPacketSize);
dev->bulk_in_size = 0x200; /* works _much_ faster */
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 2708949..5dce797 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -317,12 +317,8 @@
tower_abort_transfers (dev);
/* free data structures */
- if (dev->interrupt_in_urb != NULL) {
- usb_free_urb (dev->interrupt_in_urb);
- }
- if (dev->interrupt_out_urb != NULL) {
- usb_free_urb (dev->interrupt_out_urb);
- }
+ usb_free_urb(dev->interrupt_in_urb);
+ usb_free_urb(dev->interrupt_out_urb);
kfree (dev->read_buffer);
kfree (dev->interrupt_in_buffer);
kfree (dev->interrupt_out_buffer);
@@ -502,15 +498,11 @@
if (dev->interrupt_in_running) {
dev->interrupt_in_running = 0;
mb();
- if (dev->interrupt_in_urb != NULL && dev->udev) {
+ if (dev->udev)
usb_kill_urb (dev->interrupt_in_urb);
- }
}
- if (dev->interrupt_out_busy) {
- if (dev->interrupt_out_urb != NULL && dev->udev) {
- usb_kill_urb (dev->interrupt_out_urb);
- }
- }
+ if (dev->interrupt_out_busy && dev->udev)
+ usb_kill_urb(dev->interrupt_out_urb);
exit:
dbg(2, "%s: leave", __FUNCTION__);
@@ -898,14 +890,11 @@
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
- if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
- dev->interrupt_in_endpoint = endpoint;
- }
-
- if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
- dev->interrupt_out_endpoint = endpoint;
+ if (usb_endpoint_xfer_int(endpoint)) {
+ if (usb_endpoint_dir_in(endpoint))
+ dev->interrupt_in_endpoint = endpoint;
+ else
+ dev->interrupt_out_endpoint = endpoint;
}
}
if(dev->interrupt_in_endpoint == NULL) {
diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c
index abb4dcd..371bf2b 100644
--- a/drivers/usb/misc/phidgetkit.c
+++ b/drivers/usb/misc/phidgetkit.c
@@ -81,8 +81,8 @@
unsigned char *data;
dma_addr_t data_dma;
- struct work_struct do_notify;
- struct work_struct do_resubmit;
+ struct delayed_work do_notify;
+ struct delayed_work do_resubmit;
unsigned long input_events;
unsigned long sensor_events;
};
@@ -374,19 +374,20 @@
}
if (kit->input_events || kit->sensor_events)
- schedule_work(&kit->do_notify);
+ schedule_delayed_work(&kit->do_notify, 0);
resubmit:
- status = usb_submit_urb(urb, SLAB_ATOMIC);
+ status = usb_submit_urb(urb, GFP_ATOMIC);
if (status)
err("can't resubmit intr, %s-%s/interfacekit0, status %d",
kit->udev->bus->bus_name,
kit->udev->devpath, status);
}
-static void do_notify(void *data)
+static void do_notify(struct work_struct *work)
{
- struct interfacekit *kit = data;
+ struct interfacekit *kit =
+ container_of(work, struct interfacekit, do_notify.work);
int i;
char sysfs_file[8];
@@ -405,9 +406,11 @@
}
}
-static void do_resubmit(void *data)
+static void do_resubmit(struct work_struct *work)
{
- set_outputs(data);
+ struct interfacekit *kit =
+ container_of(work, struct interfacekit, do_resubmit.work);
+ set_outputs(kit);
}
#define show_set_output(value) \
@@ -551,7 +554,7 @@
return -ENODEV;
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & 0x80))
+ if (!usb_endpoint_dir_in(endpoint))
return -ENODEV;
/*
* bmAttributes
@@ -565,7 +568,7 @@
kit->dev_no = -1;
kit->ifkit = ifkit;
- kit->data = usb_buffer_alloc(dev, URB_INT_SIZE, SLAB_ATOMIC, &kit->data_dma);
+ kit->data = usb_buffer_alloc(dev, URB_INT_SIZE, GFP_ATOMIC, &kit->data_dma);
if (!kit->data)
goto out;
@@ -575,8 +578,8 @@
kit->udev = usb_get_dev(dev);
kit->intf = intf;
- INIT_WORK(&kit->do_notify, do_notify, kit);
- INIT_WORK(&kit->do_resubmit, do_resubmit, kit);
+ INIT_DELAYED_WORK(&kit->do_notify, do_notify);
+ INIT_DELAYED_WORK(&kit->do_resubmit, do_resubmit);
usb_fill_int_urb(kit->irq, kit->udev, pipe, kit->data,
maxp > URB_INT_SIZE ? URB_INT_SIZE : maxp,
interfacekit_irq, kit, endpoint->bInterval);
@@ -650,8 +653,7 @@
device_remove_file(kit->dev, &dev_output_attrs[i]);
out:
if (kit) {
- if (kit->irq)
- usb_free_urb(kit->irq);
+ usb_free_urb(kit->irq);
if (kit->data)
usb_buffer_free(dev, URB_INT_SIZE, kit->data, kit->data_dma);
if (kit->dev)
diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c
index 5c780ca..5727e1e 100644
--- a/drivers/usb/misc/phidgetmotorcontrol.c
+++ b/drivers/usb/misc/phidgetmotorcontrol.c
@@ -41,7 +41,7 @@
unsigned char *data;
dma_addr_t data_dma;
- struct work_struct do_notify;
+ struct delayed_work do_notify;
unsigned long input_events;
unsigned long speed_events;
unsigned long exceed_events;
@@ -148,10 +148,10 @@
set_bit(1, &mc->exceed_events);
if (mc->input_events || mc->exceed_events || mc->speed_events)
- schedule_work(&mc->do_notify);
+ schedule_delayed_work(&mc->do_notify, 0);
resubmit:
- status = usb_submit_urb(urb, SLAB_ATOMIC);
+ status = usb_submit_urb(urb, GFP_ATOMIC);
if (status)
dev_err(&mc->intf->dev,
"can't resubmit intr, %s-%s/motorcontrol0, status %d",
@@ -159,9 +159,10 @@
mc->udev->devpath, status);
}
-static void do_notify(void *data)
+static void do_notify(struct work_struct *work)
{
- struct motorcontrol *mc = data;
+ struct motorcontrol *mc =
+ container_of(work, struct motorcontrol, do_notify.work);
int i;
char sysfs_file[8];
@@ -323,7 +324,7 @@
return -ENODEV;
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & 0x80))
+ if (!usb_endpoint_dir_in(endpoint))
return -ENODEV;
/*
@@ -337,7 +338,7 @@
goto out;
mc->dev_no = -1;
- mc->data = usb_buffer_alloc(dev, URB_INT_SIZE, SLAB_ATOMIC, &mc->data_dma);
+ mc->data = usb_buffer_alloc(dev, URB_INT_SIZE, GFP_ATOMIC, &mc->data_dma);
if (!mc->data)
goto out;
@@ -348,7 +349,7 @@
mc->udev = usb_get_dev(dev);
mc->intf = intf;
mc->acceleration[0] = mc->acceleration[1] = 10;
- INIT_WORK(&mc->do_notify, do_notify, mc);
+ INIT_DELAYED_WORK(&mc->do_notify, do_notify);
usb_fill_int_urb(mc->irq, mc->udev, pipe, mc->data,
maxp > URB_INT_SIZE ? URB_INT_SIZE : maxp,
motorcontrol_irq, mc, endpoint->bInterval);
@@ -392,8 +393,7 @@
device_remove_file(mc->dev, &dev_attrs[i]);
out:
if (mc) {
- if (mc->irq)
- usb_free_urb(mc->irq);
+ usb_free_urb(mc->irq);
if (mc->data)
usb_buffer_free(dev, URB_INT_SIZE, mc->data, mc->data_dma);
if (mc->dev)
diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h
index 551ba89..dc2e5a3 100644
--- a/drivers/usb/misc/usb_u132.h
+++ b/drivers/usb/misc/usb_u132.h
@@ -52,7 +52,7 @@
* the kernel to load the "u132-hcd" module.
*
* The "ftdi-u132" module provides the interface to the inserted
-* PC card and the "u132-hcd" module uses the API to send and recieve
+* PC card and the "u132-hcd" module uses the API to send and receive
* data. The API features call-backs, so that part of the "u132-hcd"
* module code will run in the context of one of the kernel threads
* of the "ftdi-u132" module.
@@ -95,3 +95,7 @@
int halted, int skipped, int actual, int non_null));
int usb_ftdi_elan_edset_flush(struct platform_device *pdev, u8 ed_number,
void *endp);
+int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, int mem_offset,
+ u8 width, u32 *data);
+int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, int mem_offset,
+ u8 width, u32 data);
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 7c2cbdf..fb32186 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -138,7 +138,7 @@
default:
continue;
}
- if (e->desc.bEndpointAddress & USB_DIR_IN) {
+ if (usb_endpoint_dir_in(&e->desc)) {
if (!in)
in = e;
} else {
@@ -147,7 +147,7 @@
}
continue;
try_iso:
- if (e->desc.bEndpointAddress & USB_DIR_IN) {
+ if (usb_endpoint_dir_in(&e->desc)) {
if (!iso_in)
iso_in = e;
} else {
@@ -213,7 +213,7 @@
if (bytes < 0)
return NULL;
- urb = usb_alloc_urb (0, SLAB_KERNEL);
+ urb = usb_alloc_urb (0, GFP_KERNEL);
if (!urb)
return urb;
usb_fill_bulk_urb (urb, udev, pipe, NULL, bytes, simple_callback, NULL);
@@ -223,7 +223,7 @@
urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
if (usb_pipein (pipe))
urb->transfer_flags |= URB_SHORT_NOT_OK;
- urb->transfer_buffer = usb_buffer_alloc (udev, bytes, SLAB_KERNEL,
+ urb->transfer_buffer = usb_buffer_alloc (udev, bytes, GFP_KERNEL,
&urb->transfer_dma);
if (!urb->transfer_buffer) {
usb_free_urb (urb);
@@ -315,7 +315,7 @@
init_completion (&completion);
if (usb_pipeout (urb->pipe))
simple_fill_buf (urb);
- if ((retval = usb_submit_urb (urb, SLAB_KERNEL)) != 0)
+ if ((retval = usb_submit_urb (urb, GFP_KERNEL)) != 0)
break;
/* NOTE: no timeouts; can't be broken out of by interrupt */
@@ -374,7 +374,7 @@
unsigned i;
unsigned size = max;
- sg = kmalloc (nents * sizeof *sg, SLAB_KERNEL);
+ sg = kmalloc (nents * sizeof *sg, GFP_KERNEL);
if (!sg)
return NULL;
@@ -382,7 +382,7 @@
char *buf;
unsigned j;
- buf = kzalloc (size, SLAB_KERNEL);
+ buf = kzalloc (size, GFP_KERNEL);
if (!buf) {
free_sglist (sg, i);
return NULL;
@@ -428,7 +428,7 @@
(udev->speed == USB_SPEED_HIGH)
? (INTERRUPT_RATE << 3)
: INTERRUPT_RATE,
- sg, nents, 0, SLAB_KERNEL);
+ sg, nents, 0, GFP_KERNEL);
if (retval)
break;
@@ -819,7 +819,7 @@
/* resubmit if we need to, else mark this as done */
if ((status == 0) && (ctx->pending < ctx->count)) {
- if ((status = usb_submit_urb (urb, SLAB_ATOMIC)) != 0) {
+ if ((status = usb_submit_urb (urb, GFP_ATOMIC)) != 0) {
dbg ("can't resubmit ctrl %02x.%02x, err %d",
reqp->bRequestType, reqp->bRequest, status);
urb->dev = NULL;
@@ -855,7 +855,7 @@
* as with bulk/intr sglists, sglen is the queue depth; it also
* controls which subtests run (more tests than sglen) or rerun.
*/
- urb = kcalloc(param->sglen, sizeof(struct urb *), SLAB_KERNEL);
+ urb = kcalloc(param->sglen, sizeof(struct urb *), GFP_KERNEL);
if (!urb)
return -ENOMEM;
for (i = 0; i < param->sglen; i++) {
@@ -981,7 +981,7 @@
if (!u)
goto cleanup;
- reqp = usb_buffer_alloc (udev, sizeof *reqp, SLAB_KERNEL,
+ reqp = usb_buffer_alloc (udev, sizeof *reqp, GFP_KERNEL,
&u->setup_dma);
if (!reqp)
goto cleanup;
@@ -999,7 +999,7 @@
context.urb = urb;
spin_lock_irq (&context.lock);
for (i = 0; i < param->sglen; i++) {
- context.status = usb_submit_urb (urb [i], SLAB_ATOMIC);
+ context.status = usb_submit_urb (urb [i], GFP_ATOMIC);
if (context.status != 0) {
dbg ("can't submit urb[%d], status %d",
i, context.status);
@@ -1041,7 +1041,7 @@
// we "know" -EPIPE (stall) never happens
if (!status)
- status = usb_submit_urb (urb, SLAB_ATOMIC);
+ status = usb_submit_urb (urb, GFP_ATOMIC);
if (status) {
urb->status = status;
complete ((struct completion *) urb->context);
@@ -1067,7 +1067,7 @@
* FIXME want additional tests for when endpoint is STALLing
* due to errors, or is just NAKing requests.
*/
- if ((retval = usb_submit_urb (urb, SLAB_KERNEL)) != 0) {
+ if ((retval = usb_submit_urb (urb, GFP_KERNEL)) != 0) {
dev_dbg (&dev->intf->dev, "submit fail %d\n", retval);
return retval;
}
@@ -1251,7 +1251,7 @@
if (length < 1 || length > 0xffff || vary >= length)
return -EINVAL;
- buf = kmalloc(length, SLAB_KERNEL);
+ buf = kmalloc(length, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -1403,7 +1403,7 @@
maxp *= 1 + (0x3 & (le16_to_cpu(desc->wMaxPacketSize) >> 11));
packets = (bytes + maxp - 1) / maxp;
- urb = usb_alloc_urb (packets, SLAB_KERNEL);
+ urb = usb_alloc_urb (packets, GFP_KERNEL);
if (!urb)
return urb;
urb->dev = udev;
@@ -1411,7 +1411,7 @@
urb->number_of_packets = packets;
urb->transfer_buffer_length = bytes;
- urb->transfer_buffer = usb_buffer_alloc (udev, bytes, SLAB_KERNEL,
+ urb->transfer_buffer = usb_buffer_alloc (udev, bytes, GFP_KERNEL,
&urb->transfer_dma);
if (!urb->transfer_buffer) {
usb_free_urb (urb);
@@ -1481,7 +1481,7 @@
spin_lock_irq (&context.lock);
for (i = 0; i < param->sglen; i++) {
++context.pending;
- status = usb_submit_urb (urbs [i], SLAB_ATOMIC);
+ status = usb_submit_urb (urbs [i], GFP_ATOMIC);
if (status < 0) {
ERROR (dev, "submit iso[%d], error %d\n", i, status);
if (i == 0) {
@@ -1900,7 +1900,7 @@
}
#endif
- dev = kzalloc(sizeof(*dev), SLAB_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
info = (struct usbtest_info *) id->driver_info;
@@ -1910,7 +1910,7 @@
dev->intf = intf;
/* cacheline-aligned scratch for i/o */
- if ((dev->buf = kmalloc (TBUF_SIZE, SLAB_KERNEL)) == NULL) {
+ if ((dev->buf = kmalloc (TBUF_SIZE, GFP_KERNEL)) == NULL) {
kfree (dev);
return -ENOMEM;
}
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 7a2346c..05cf2c9 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -50,7 +50,7 @@
#define SLAB_NAME_SZ 30
struct mon_reader_text {
- kmem_cache_t *e_slab;
+ struct kmem_cache *e_slab;
int nevents;
struct list_head e_list;
struct mon_reader r; /* In C, parent class can be placed anywhere */
@@ -63,7 +63,7 @@
char slab_name[SLAB_NAME_SZ];
};
-static void mon_text_ctor(void *, kmem_cache_t *, unsigned long);
+static void mon_text_ctor(void *, struct kmem_cache *, unsigned long);
/*
* mon_text_submit
@@ -147,7 +147,7 @@
stamp = mon_get_timestamp();
if (rp->nevents >= EVENT_MAX ||
- (ep = kmem_cache_alloc(rp->e_slab, SLAB_ATOMIC)) == NULL) {
+ (ep = kmem_cache_alloc(rp->e_slab, GFP_ATOMIC)) == NULL) {
rp->r.m_bus->cnt_text_lost++;
return;
}
@@ -188,7 +188,7 @@
struct mon_event_text *ep;
if (rp->nevents >= EVENT_MAX ||
- (ep = kmem_cache_alloc(rp->e_slab, SLAB_ATOMIC)) == NULL) {
+ (ep = kmem_cache_alloc(rp->e_slab, GFP_ATOMIC)) == NULL) {
rp->r.m_bus->cnt_text_lost++;
return;
}
@@ -450,7 +450,7 @@
/*
* Slab interface: constructor.
*/
-static void mon_text_ctor(void *mem, kmem_cache_t *slab, unsigned long sflags)
+static void mon_text_ctor(void *mem, struct kmem_cache *slab, unsigned long sflags)
{
/*
* Nothing to initialize. No, really!
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index 881841e..95e682e 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -249,9 +249,9 @@
req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
req->bRequest = cmd;
- req->wValue = value;
- req->wIndex = index;
- req->wLength = size;
+ req->wValue = cpu_to_le16(value);
+ req->wIndex = cpu_to_le16(index);
+ req->wLength = cpu_to_le16(size);
usb_fill_control_urb(urb, dev->udev,
usb_sndctrlpipe(dev->udev, 0),
diff --git a/drivers/usb/net/catc.c b/drivers/usb/net/catc.c
index f740325..4852012 100644
--- a/drivers/usb/net/catc.c
+++ b/drivers/usb/net/catc.c
@@ -345,7 +345,7 @@
}
}
resubmit:
- status = usb_submit_urb (urb, SLAB_ATOMIC);
+ status = usb_submit_urb (urb, GFP_ATOMIC);
if (status)
err ("can't resubmit intr, %s-%s, status %d",
catc->usbdev->bus->bus_name,
@@ -786,14 +786,10 @@
if ((!catc->ctrl_urb) || (!catc->tx_urb) ||
(!catc->rx_urb) || (!catc->irq_urb)) {
err("No free urbs available.");
- if (catc->ctrl_urb)
- usb_free_urb(catc->ctrl_urb);
- if (catc->tx_urb)
- usb_free_urb(catc->tx_urb);
- if (catc->rx_urb)
- usb_free_urb(catc->rx_urb);
- if (catc->irq_urb)
- usb_free_urb(catc->irq_urb);
+ usb_free_urb(catc->ctrl_urb);
+ usb_free_urb(catc->tx_urb);
+ usb_free_urb(catc->rx_urb);
+ usb_free_urb(catc->irq_urb);
free_netdev(netdev);
return -ENOMEM;
}
diff --git a/drivers/usb/net/cdc_ether.c b/drivers/usb/net/cdc_ether.c
index f6971b8..44a9154 100644
--- a/drivers/usb/net/cdc_ether.c
+++ b/drivers/usb/net/cdc_ether.c
@@ -200,8 +200,7 @@
dev->status = &info->control->cur_altsetting->endpoint [0];
desc = &dev->status->desc;
- if (desc->bmAttributes != USB_ENDPOINT_XFER_INT
- || !(desc->bEndpointAddress & USB_DIR_IN)
+ if (!usb_endpoint_is_int_in(desc)
|| (le16_to_cpu(desc->wMaxPacketSize)
< sizeof(struct usb_cdc_notification))
|| !desc->bInterval) {
diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c
index 7c906a4..fa78326 100644
--- a/drivers/usb/net/kaweth.c
+++ b/drivers/usb/net/kaweth.c
@@ -222,7 +222,7 @@
int suspend_lowmem_ctrl;
int linkstate;
int opened;
- struct work_struct lowmem_work;
+ struct delayed_work lowmem_work;
struct usb_device *dev;
struct net_device *net;
@@ -530,9 +530,10 @@
kaweth_resubmit_int_urb(kaweth, GFP_ATOMIC);
}
-static void kaweth_resubmit_tl(void *d)
+static void kaweth_resubmit_tl(struct work_struct *work)
{
- struct kaweth_device *kaweth = (struct kaweth_device *)d;
+ struct kaweth_device *kaweth =
+ container_of(work, struct kaweth_device, lowmem_work.work);
if (IS_BLOCKED(kaweth->status))
return;
@@ -1126,7 +1127,7 @@
/* kaweth is zeroed as part of alloc_netdev */
- INIT_WORK(&kaweth->lowmem_work, kaweth_resubmit_tl, (void *)kaweth);
+ INIT_DELAYED_WORK(&kaweth->lowmem_work, kaweth_resubmit_tl);
SET_MODULE_OWNER(netdev);
diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c
index ce00de8..4936359 100644
--- a/drivers/usb/net/net1080.c
+++ b/drivers/usb/net/net1080.c
@@ -237,12 +237,12 @@
#define STATUS_CONN_OTHER (1 << 14)
#define STATUS_SUSPEND_OTHER (1 << 13)
#define STATUS_MAILBOX_OTHER (1 << 12)
-#define STATUS_PACKETS_OTHER(n) (((n) >> 8) && 0x03)
+#define STATUS_PACKETS_OTHER(n) (((n) >> 8) & 0x03)
#define STATUS_CONN_THIS (1 << 6)
#define STATUS_SUSPEND_THIS (1 << 5)
#define STATUS_MAILBOX_THIS (1 << 4)
-#define STATUS_PACKETS_THIS(n) (((n) >> 0) && 0x03)
+#define STATUS_PACKETS_THIS(n) (((n) >> 0) & 0x03)
#define STATUS_UNSPEC_MASK 0x0c8c
#define STATUS_NOISE_MASK ((u16)~(0x0303|STATUS_UNSPEC_MASK))
@@ -383,7 +383,7 @@
int status;
/* Send a flush */
- urb = usb_alloc_urb(0, SLAB_ATOMIC);
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb)
return;
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 33abbd2..d48c024 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -163,6 +163,7 @@
/* using ATOMIC, we'd never wake up if we slept */
if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
+ set_current_state(TASK_RUNNING);
if (ret == -ENODEV)
netif_device_detach(pegasus->net);
if (netif_msg_drv(pegasus))
@@ -855,7 +856,7 @@
pegasus->stats.rx_missed_errors += ((d[3] & 0x7f) << 8) | d[4];
}
- status = usb_submit_urb(urb, SLAB_ATOMIC);
+ status = usb_submit_urb(urb, GFP_ATOMIC);
if (status == -ENODEV)
netif_device_detach(pegasus->net);
if (status && netif_msg_timer(pegasus))
@@ -1280,9 +1281,9 @@
static struct workqueue_struct *pegasus_workqueue = NULL;
#define CARRIER_CHECK_DELAY (2 * HZ)
-static void check_carrier(void *data)
+static void check_carrier(struct work_struct *work)
{
- pegasus_t *pegasus = data;
+ pegasus_t *pegasus = container_of(work, pegasus_t, carrier_check.work);
set_carrier(pegasus->net);
if (!(pegasus->flags & PEGASUS_UNPLUG)) {
queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
@@ -1318,7 +1319,7 @@
tasklet_init(&pegasus->rx_tl, rx_fixup, (unsigned long) pegasus);
- INIT_WORK(&pegasus->carrier_check, check_carrier, pegasus);
+ INIT_DELAYED_WORK(&pegasus->carrier_check, check_carrier);
pegasus->intf = intf;
pegasus->usb = dev;
diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h
index 0064380..98f6898 100644
--- a/drivers/usb/net/pegasus.h
+++ b/drivers/usb/net/pegasus.h
@@ -95,7 +95,7 @@
int dev_index;
int intr_interval;
struct tasklet_struct rx_tl;
- struct work_struct carrier_check;
+ struct delayed_work carrier_check;
struct urb *ctrl_urb, *rx_urb, *tx_urb, *intr_urb;
struct sk_buff *rx_pool[RX_SKBS];
struct sk_buff *rx_skb;
diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c
index c2a28d8..99f26b3 100644
--- a/drivers/usb/net/rndis_host.c
+++ b/drivers/usb/net/rndis_host.c
@@ -469,7 +469,7 @@
struct rndis_halt *halt;
/* try to clear any rndis state/activity (no i/o from stack!) */
- halt = kcalloc(1, sizeof *halt, SLAB_KERNEL);
+ halt = kcalloc(1, sizeof *halt, GFP_KERNEL);
if (halt) {
halt->msg_type = RNDIS_MSG_HALT;
halt->msg_len = ccpu2(sizeof *halt);
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index 72171f9..c54235f 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -587,7 +587,7 @@
}
resubmit:
- status = usb_submit_urb (urb, SLAB_ATOMIC);
+ status = usb_submit_urb (urb, GFP_ATOMIC);
if (status == -ENODEV)
netif_device_detach(dev->netdev);
else if (status)
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 760b532..6e39e99 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -116,7 +116,7 @@
e = alt->endpoint + ep;
switch (e->desc.bmAttributes) {
case USB_ENDPOINT_XFER_INT:
- if (!(e->desc.bEndpointAddress & USB_DIR_IN))
+ if (!usb_endpoint_dir_in(&e->desc))
continue;
intr = 1;
/* FALLTHROUGH */
@@ -125,7 +125,7 @@
default:
continue;
}
- if (e->desc.bEndpointAddress & USB_DIR_IN) {
+ if (usb_endpoint_dir_in(&e->desc)) {
if (!intr && !in)
in = e;
else if (intr && !status)
@@ -179,9 +179,9 @@
period = max ((int) dev->status->desc.bInterval,
(dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
- buf = kmalloc (maxp, SLAB_KERNEL);
+ buf = kmalloc (maxp, GFP_KERNEL);
if (buf) {
- dev->interrupt = usb_alloc_urb (0, SLAB_KERNEL);
+ dev->interrupt = usb_alloc_urb (0, GFP_KERNEL);
if (!dev->interrupt) {
kfree (buf);
return -ENOMEM;
@@ -782,9 +782,10 @@
* especially now that control transfers can be queued.
*/
static void
-kevent (void *data)
+kevent (struct work_struct *work)
{
- struct usbnet *dev = data;
+ struct usbnet *dev =
+ container_of(work, struct usbnet, kevent);
int status;
/* usb_clear_halt() needs a thread context */
@@ -1146,7 +1147,7 @@
skb_queue_head_init (&dev->done);
dev->bh.func = usbnet_bh;
dev->bh.data = (unsigned long) dev;
- INIT_WORK (&dev->kevent, kevent, dev);
+ INIT_WORK (&dev->kevent, kevent);
dev->delay.function = usbnet_bh;
dev->delay.data = (unsigned long) dev;
init_timer (&dev->delay);
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 2a8dd4c..2f4d303 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -554,6 +554,17 @@
To compile this driver as a module, choose M here: the
module will be called omninet.
+config USB_SERIAL_DEBUG
+ tristate "USB Debugging Device"
+ depends on USB_SERIAL
+ help
+ Say Y here if you have a USB debugging device used to recieve
+ debugging data from another machine. The most common of these
+ devices is the NetChip TurboCONNECT device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usb-debug.
+
config USB_EZUSB
bool
depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index a5047dc..61166ad 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -18,6 +18,7 @@
obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o
obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o
obj-$(CONFIG_USB_SERIAL_CYPRESS_M8) += cypress_m8.o
+obj-$(CONFIG_USB_SERIAL_DEBUG) += usb_debug.o
obj-$(CONFIG_USB_SERIAL_DIGI_ACCELEPORT) += digi_acceleport.o
obj-$(CONFIG_USB_SERIAL_EDGEPORT) += io_edgeport.o
obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += io_ti.o
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 8122755..86bcf63 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -92,6 +92,7 @@
struct circ_buf *rx_buf; /* read buffer */
int rx_flags; /* for throttilng */
struct work_struct rx_work; /* work cue for the receiving line */
+ struct usb_serial_port *port; /* USB port with which associated */
};
/* Private methods */
@@ -251,10 +252,11 @@
schedule_work(&port->work);
}
-static void aircable_read(void *params)
+static void aircable_read(struct work_struct *work)
{
- struct usb_serial_port *port = params;
- struct aircable_private *priv = usb_get_serial_port_data(port);
+ struct aircable_private *priv =
+ container_of(work, struct aircable_private, rx_work);
+ struct usb_serial_port *port = priv->port;
struct tty_struct *tty;
unsigned char *data;
int count;
@@ -270,8 +272,11 @@
*/
tty = port->tty;
- if (!tty)
+ if (!tty) {
schedule_work(&priv->rx_work);
+ err("%s - No tty available", __FUNCTION__);
+ return ;
+ }
count = min(64, serial_buf_data_avail(priv->rx_buf));
@@ -305,9 +310,7 @@
for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
endpoint = &iface_desc->endpoint[i].desc;
- if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
- ((endpoint->bmAttributes & 3) == 0x02)) {
- /* we found our bulk out endpoint */
+ if (usb_endpoint_is_bulk_out(endpoint)) {
dbg("found bulk out on endpoint %d", i);
++num_bulk_out;
}
@@ -348,7 +351,8 @@
}
priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
- INIT_WORK(&priv->rx_work, aircable_read, port);
+ priv->port = port;
+ INIT_WORK(&priv->rx_work, aircable_read);
usb_set_serial_port_data(serial->port[0], priv);
@@ -515,7 +519,7 @@
package_length - shift);
}
}
- aircable_read(port);
+ aircable_read(&priv->rx_work);
}
/* Schedule the next read _if_ we are still open */
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 7f5d546..96c7372 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -19,6 +19,7 @@
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+ { USB_DEVICE(0x1410, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */
{ USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */
{ },
};
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index ca52f12..863966c 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -85,10 +85,9 @@
int i;
for (i = 0; i < serial->num_ports; ++i) {
- priv = kmalloc(sizeof (struct ark3116_private), GFP_KERNEL);
+ priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL);
if (!priv)
goto cleanup;
- memset(priv, 0x00, sizeof (struct ark3116_private));
spin_lock_init(&priv->lock);
usb_set_serial_port_data(serial->port[i], priv);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 3a9073d..7167728 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -166,19 +166,17 @@
if (serial->type->set_termios) {
/* build up a fake tty structure so that the open call has something
* to look at to get the cflag value */
- tty = kmalloc (sizeof (*tty), GFP_KERNEL);
+ tty = kzalloc(sizeof(*tty), GFP_KERNEL);
if (!tty) {
err ("no more memory");
return -ENOMEM;
}
- termios = kmalloc (sizeof (*termios), GFP_KERNEL);
+ termios = kzalloc(sizeof(*termios), GFP_KERNEL);
if (!termios) {
err ("no more memory");
kfree (tty);
return -ENOMEM;
}
- memset (tty, 0x00, sizeof(*tty));
- memset (termios, 0x00, sizeof(*termios));
termios->c_cflag = cflag;
tty->termios = termios;
port->tty = tty;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index f2e89a0..093f303 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1684,15 +1684,14 @@
info(DRIVER_DESC " " DRIVER_VERSION);
return 0;
-failed_usb_register:
- usb_deregister(&cypress_driver);
-failed_ca42v2_register:
- usb_serial_deregister(&cypress_ca42v2_device);
-failed_hidcom_register:
- usb_serial_deregister(&cypress_hidcom_device);
-failed_em_register:
- usb_serial_deregister(&cypress_earthmate_device);
+failed_usb_register:
+ usb_serial_deregister(&cypress_ca42v2_device);
+failed_ca42v2_register:
+ usb_serial_deregister(&cypress_hidcom_device);
+failed_hidcom_register:
+ usb_serial_deregister(&cypress_earthmate_device);
+failed_em_register:
return retval;
}
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index bdb5810..83d0e21 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -157,7 +157,7 @@
* to TASK_RUNNING will be lost and write_chan's subsequent call to
* schedule() will never return (unless it catches a signal).
* This race condition occurs because write_bulk_callback() (and thus
-* the wakeup) are called asynchonously from an interrupt, rather than
+* the wakeup) are called asynchronously from an interrupt, rather than
* from the scheduler. We can avoid the race by calling the wakeup
* from the scheduler queue and that's our fix: Now, at the end of
* write_bulk_callback() we queue up a wakeup call on the scheduler
@@ -430,13 +430,14 @@
int dp_in_close; /* close in progress */
wait_queue_head_t dp_close_wait; /* wait queue for close */
struct work_struct dp_wakeup_work;
+ struct usb_serial_port *dp_port;
};
/* Local Function Declarations */
static void digi_wakeup_write( struct usb_serial_port *port );
-static void digi_wakeup_write_lock(void *);
+static void digi_wakeup_write_lock(struct work_struct *work);
static int digi_write_oob_command( struct usb_serial_port *port,
unsigned char *buf, int count, int interruptible );
static int digi_write_inb_command( struct usb_serial_port *port,
@@ -598,11 +599,12 @@
* on writes.
*/
-static void digi_wakeup_write_lock(void *arg)
+static void digi_wakeup_write_lock(struct work_struct *work)
{
- struct usb_serial_port *port = arg;
+ struct digi_port *priv =
+ container_of(work, struct digi_port, dp_wakeup_work);
+ struct usb_serial_port *port = priv->dp_port;
unsigned long flags;
- struct digi_port *priv = usb_get_serial_port_data(port);
spin_lock_irqsave( &priv->dp_port_lock, flags );
@@ -1702,8 +1704,8 @@
init_waitqueue_head( &priv->dp_flush_wait );
priv->dp_in_close = 0;
init_waitqueue_head( &priv->dp_close_wait );
- INIT_WORK(&priv->dp_wakeup_work,
- digi_wakeup_write_lock, serial->port[i]);
+ INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
+ priv->dp_port = serial->port[i];
/* initialize write wait queue for this port */
init_waitqueue_head( &serial->port[i]->write_wait );
diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c
index 5169c2d..97ee718 100644
--- a/drivers/usb/serial/ezusb.c
+++ b/drivers/usb/serial/ezusb.c
@@ -31,12 +31,11 @@
return -ENODEV;
}
- transfer_buffer = kmalloc (length, GFP_KERNEL);
+ transfer_buffer = kmemdup(data, length, GFP_KERNEL);
if (!transfer_buffer) {
dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, length);
return -ENOMEM;
}
- memcpy (transfer_buffer, data, length);
result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), bRequest, 0x40, address, 0, transfer_buffer, length, 3000);
kfree (transfer_buffer);
return result;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index bd76b4c..72e4d48 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -311,6 +311,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) },
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
@@ -511,6 +512,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
+ { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -557,7 +559,8 @@
char prev_status, diff_status; /* Used for TIOCMIWAIT */
__u8 rx_flags; /* receive state flags (throttling) */
spinlock_t rx_lock; /* spinlock for receive state */
- struct work_struct rx_work;
+ struct delayed_work rx_work;
+ struct usb_serial_port *port;
int rx_processed;
unsigned long rx_bytes;
@@ -591,7 +594,7 @@
static int ftdi_chars_in_buffer (struct usb_serial_port *port);
static void ftdi_write_bulk_callback (struct urb *urb);
static void ftdi_read_bulk_callback (struct urb *urb);
-static void ftdi_process_read (void *param);
+static void ftdi_process_read (struct work_struct *work);
static void ftdi_set_termios (struct usb_serial_port *port, struct termios * old);
static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file);
static int ftdi_tiocmset (struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear);
@@ -1199,7 +1202,8 @@
port->read_urb->transfer_buffer_length = BUFSZ;
}
- INIT_WORK(&priv->rx_work, ftdi_process_read, port);
+ INIT_DELAYED_WORK(&priv->rx_work, ftdi_process_read);
+ priv->port = port;
/* Free port's existing write urb and transfer buffer. */
if (port->write_urb) {
@@ -1386,8 +1390,7 @@
flush_scheduled_work();
/* shutdown our bulk read */
- if (port->read_urb)
- usb_kill_urb(port->read_urb);
+ usb_kill_urb(port->read_urb);
} /* ftdi_close */
@@ -1639,17 +1642,18 @@
priv->rx_bytes += countread;
spin_unlock_irqrestore(&priv->rx_lock, flags);
- ftdi_process_read(port);
+ ftdi_process_read(&priv->rx_work.work);
} /* ftdi_read_bulk_callback */
-static void ftdi_process_read (void *param)
+static void ftdi_process_read (struct work_struct *work)
{ /* ftdi_process_read */
- struct usb_serial_port *port = (struct usb_serial_port*)param;
+ struct ftdi_private *priv =
+ container_of(work, struct ftdi_private, rx_work.work);
+ struct usb_serial_port *port = priv->port;
struct urb *urb;
struct tty_struct *tty;
- struct ftdi_private *priv;
char error_flag;
unsigned char *data;
@@ -2178,7 +2182,7 @@
spin_unlock_irqrestore(&priv->rx_lock, flags);
if (actually_throttled)
- schedule_work(&priv->rx_work);
+ schedule_delayed_work(&priv->rx_work, 0);
}
static int __init ftdi_init (void)
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index f0edb87..bae117d 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -55,6 +55,9 @@
/* iPlus device */
#define FTDI_IPLUS_PID 0xD070 /* Product Id */
+/* DMX4ALL DMX Interfaces */
+#define FTDI_DMX4ALL 0xC850
+
/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
/* they use the ftdi chipset for the USB interface and the vendor id is the same */
#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
@@ -175,9 +178,15 @@
#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
/*
+ * FTDI USB UART chips used in construction projects from the
+ * Elektor Electronics magazine (http://elektor-electronics.co.uk)
+ */
+#define ELEKTOR_VID 0x0C7D
+#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
+
+/*
* DSS-20 Sync Station for Sony Ericsson P800
*/
-
#define FTDI_DSS20_PID 0xFC82
/*
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 4543152..6530d39 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1523,12 +1523,11 @@
dbg("%s", __FUNCTION__);
- garmin_data_p = kmalloc (sizeof(struct garmin_data), GFP_KERNEL);
+ garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL);
if (garmin_data_p == NULL) {
dev_err(&port->dev, "%s - Out of memory\n", __FUNCTION__);
return -ENOMEM;
}
- memset (garmin_data_p, 0, sizeof(struct garmin_data));
init_timer(&garmin_data_p->timer);
spin_lock_init(&garmin_data_p->lock);
INIT_LIST_HEAD(&garmin_data_p->pktlist);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 91bd301..d06547a 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1038,9 +1038,7 @@
edge_port->open = FALSE;
edge_port->openPending = FALSE;
- if (edge_port->write_urb) {
- usb_kill_urb(edge_port->write_urb);
- }
+ usb_kill_urb(edge_port->write_urb);
if (edge_port->write_urb) {
/* if this urb had a transfer buffer already (old transfer) free it */
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 6238aff..d72cf8b 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -320,6 +320,7 @@
{ USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */
{ USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */
{ USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */
+ { USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC USB Modem */
{ USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */
{ USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */
{ USB_DEVICE(0x0BB4, 0x0A03) }, /* PocketPC USB Sync */
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 2a4bb66..d3b9a35 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -206,10 +206,9 @@
dbg("%s", __FUNCTION__);
- buf_flow_init = kmalloc(16, GFP_KERNEL);
+ buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL);
if (!buf_flow_init)
return -ENOMEM;
- memcpy(buf_flow_init, buf_flow_static, 16);
if (port->tty)
port->tty->low_latency = 1;
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 53be824..7639652 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2306,22 +2306,16 @@
}
/* Now free them */
- if (s_priv->instat_urb)
- usb_free_urb(s_priv->instat_urb);
- if (s_priv->glocont_urb)
- usb_free_urb(s_priv->glocont_urb);
+ usb_free_urb(s_priv->instat_urb);
+ usb_free_urb(s_priv->glocont_urb);
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
p_priv = usb_get_serial_port_data(port);
- if (p_priv->inack_urb)
- usb_free_urb(p_priv->inack_urb);
- if (p_priv->outcont_urb)
- usb_free_urb(p_priv->outcont_urb);
+ usb_free_urb(p_priv->inack_urb);
+ usb_free_urb(p_priv->outcont_urb);
for (j = 0; j < 2; j++) {
- if (p_priv->in_urbs[j])
- usb_free_urb(p_priv->in_urbs[j]);
- if (p_priv->out_urbs[j])
- usb_free_urb(p_priv->out_urbs[j]);
+ usb_free_urb(p_priv->in_urbs[j]);
+ usb_free_urb(p_priv->out_urbs[j]);
}
}
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 9090051..e09a0bf 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -120,6 +120,8 @@
int tx_throttled;
struct work_struct wakeup_work;
struct work_struct unthrottle_work;
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
};
@@ -175,9 +177,11 @@
};
#endif
-static void keyspan_pda_wakeup_write( struct usb_serial_port *port )
+static void keyspan_pda_wakeup_write(struct work_struct *work)
{
-
+ struct keyspan_pda_private *priv =
+ container_of(work, struct keyspan_pda_private, wakeup_work);
+ struct usb_serial_port *port = priv->port;
struct tty_struct *tty = port->tty;
/* wake up port processes */
@@ -187,8 +191,11 @@
tty_wakeup(tty);
}
-static void keyspan_pda_request_unthrottle( struct usb_serial *serial )
+static void keyspan_pda_request_unthrottle(struct work_struct *work)
{
+ struct keyspan_pda_private *priv =
+ container_of(work, struct keyspan_pda_private, unthrottle_work);
+ struct usb_serial *serial = priv->serial;
int result;
dbg(" request_unthrottle");
@@ -765,11 +772,10 @@
return (1); /* error */
usb_set_serial_port_data(serial->port[0], priv);
init_waitqueue_head(&serial->port[0]->write_wait);
- INIT_WORK(&priv->wakeup_work, (void *)keyspan_pda_wakeup_write,
- (void *)(serial->port[0]));
- INIT_WORK(&priv->unthrottle_work,
- (void *)keyspan_pda_request_unthrottle,
- (void *)(serial));
+ INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
+ INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
+ priv->serial = serial;
+ priv->port = serial->port[0];
return (0);
}
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index ff03331..2372899 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -185,13 +185,11 @@
for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
endpoint = &altsetting->endpoint[i];
- if (((endpoint->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) &&
- ((endpoint->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
+ if (usb_endpoint_is_int_out(&endpoint->desc)) {
dbg("%s Found interrupt out endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress);
priv->write_int_endpoint_address = endpoint->desc.bEndpointAddress;
}
- if (((endpoint->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) &&
- ((endpoint->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
+ if (usb_endpoint_is_int_in(&endpoint->desc)) {
dbg("%s Found interrupt in endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress);
priv->read_int_endpoint_address = endpoint->desc.bEndpointAddress;
}
@@ -355,8 +353,7 @@
usb_free_urb( port->write_urb );
port->write_urb = NULL;
}
- if (port->interrupt_in_urb)
- usb_kill_urb(port->interrupt_in_urb);
+ usb_kill_urb(port->interrupt_in_urb);
}
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index b7582cc..a906e50 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -358,10 +358,8 @@
/* Puh, that's dirty */
port = serial->port[0];
rport = serial->port[1];
- if (port->read_urb) {
- /* No unlinking, it wasn't submitted yet. */
- usb_free_urb(port->read_urb);
- }
+ /* No unlinking, it wasn't submitted yet. */
+ usb_free_urb(port->read_urb);
port->read_urb = rport->interrupt_in_urb;
rport->interrupt_in_urb = NULL;
port->read_urb->context = port;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 82cd15b..70f93b1 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -363,7 +363,7 @@
/* Initialising the write urb pool */
for (j = 0; j < NUM_URBS; ++j) {
- urb = usb_alloc_urb(0,SLAB_ATOMIC);
+ urb = usb_alloc_urb(0,GFP_ATOMIC);
mos7720_port->write_urb_pool[j] = urb;
if (urb == NULL) {
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 5b71962..5432c63 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -826,7 +826,7 @@
/* Initialising the write urb pool */
for (j = 0; j < NUM_URBS; ++j) {
- urb = usb_alloc_urb(0, SLAB_ATOMIC);
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
mos7840_port->write_urb_pool[j] = urb;
if (urb == NULL) {
@@ -2596,12 +2596,11 @@
/* set up port private structures */
for (i = 0; i < serial->num_ports; ++i) {
- mos7840_port = kmalloc(sizeof(struct moschip_port), GFP_KERNEL);
+ mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7840_port == NULL) {
err("%s - Out of memory", __FUNCTION__);
return -ENOMEM;
}
- memset(mos7840_port, 0, sizeof(struct moschip_port));
/* Initialize all port interrupt end point to port 0 int endpoint *
* Our device has only one interrupt end point comman to all port */
@@ -2787,7 +2786,7 @@
i + 1, status);
}
- mos7840_port->control_urb = usb_alloc_urb(0, SLAB_ATOMIC);
+ mos7840_port->control_urb = usb_alloc_urb(0, GFP_ATOMIC);
mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
}
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 0610409..054abee 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -95,8 +95,7 @@
{
dbg("%s - port %d", __FUNCTION__, port->number);
- if (port->interrupt_in_urb)
- usb_kill_urb(port->interrupt_in_urb);
+ usb_kill_urb(port->interrupt_in_urb);
}
static int navman_write(struct usb_serial_port *port,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 07400c0..ae98d8c 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -228,6 +228,7 @@
/* null entry */
static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
+ { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
};
static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -239,6 +240,7 @@
static struct usb_device_id ti_id_table_combined[] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
+ { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
@@ -459,13 +461,12 @@
/* set up port structures */
for (i = 0; i < serial->num_ports; ++i) {
- tport = kmalloc(sizeof(struct ti_port), GFP_KERNEL);
+ tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL);
if (tport == NULL) {
dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
status = -ENOMEM;
goto free_tports;
}
- memset(tport, 0, sizeof(struct ti_port));
spin_lock_init(&tport->tp_lock);
tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 02c1aeb..b5541bf 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -28,6 +28,7 @@
/* Vendor and product ids */
#define TI_VENDOR_ID 0x0451
#define TI_3410_PRODUCT_ID 0x3410
+#define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */
#define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */
#define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */
#define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 8006e51..3d5072f 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -533,9 +533,10 @@
schedule_work(&port->work);
}
-static void usb_serial_port_work(void *private)
+static void usb_serial_port_work(struct work_struct *work)
{
- struct usb_serial_port *port = private;
+ struct usb_serial_port *port =
+ container_of(work, struct usb_serial_port, work);
struct tty_struct *tty;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -799,7 +800,7 @@
port->serial = serial;
spin_lock_init(&port->lock);
mutex_init(&port->mutex);
- INIT_WORK(&port->work, usb_serial_port_work, port);
+ INIT_WORK(&port->work, usb_serial_port_work);
serial->port[i] = port;
}
@@ -952,32 +953,28 @@
port = serial->port[i];
if (!port)
continue;
- if (port->read_urb)
- usb_free_urb (port->read_urb);
+ usb_free_urb(port->read_urb);
kfree(port->bulk_in_buffer);
}
for (i = 0; i < num_bulk_out; ++i) {
port = serial->port[i];
if (!port)
continue;
- if (port->write_urb)
- usb_free_urb (port->write_urb);
+ usb_free_urb(port->write_urb);
kfree(port->bulk_out_buffer);
}
for (i = 0; i < num_interrupt_in; ++i) {
port = serial->port[i];
if (!port)
continue;
- if (port->interrupt_in_urb)
- usb_free_urb (port->interrupt_in_urb);
+ usb_free_urb(port->interrupt_in_urb);
kfree(port->interrupt_in_buffer);
}
for (i = 0; i < num_interrupt_out; ++i) {
port = serial->port[i];
if (!port)
continue;
- if (port->interrupt_out_urb)
- usb_free_urb (port->interrupt_out_urb);
+ usb_free_urb(port->interrupt_out_urb);
kfree(port->interrupt_out_buffer);
}
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
new file mode 100644
index 0000000..257a5e4
--- /dev/null
+++ b/drivers/usb/serial/usb_debug.c
@@ -0,0 +1,65 @@
+/*
+ * USB Debug cable driver
+ *
+ * Copyright (C) 2006 Greg Kroah-Hartman <greg@kroah.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x0525, 0x127a) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver debug_driver = {
+ .name = "debug",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+};
+
+static struct usb_serial_driver debug_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "debug",
+ },
+ .id_table = id_table,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .num_ports = 1,
+};
+
+static int __init debug_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&debug_device);
+ if (retval)
+ return retval;
+ retval = usb_register(&debug_driver);
+ if (retval)
+ usb_serial_deregister(&debug_device);
+ return retval;
+}
+
+static void __exit debug_exit(void)
+{
+ usb_deregister(&debug_driver);
+ usb_serial_deregister(&debug_device);
+}
+
+module_init(debug_init);
+module_exit(debug_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index befe2e1..eef5eaa 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -348,8 +348,7 @@
/* shutdown our urbs */
usb_kill_urb(port->read_urb);
- if (port->interrupt_in_urb)
- usb_kill_urb(port->interrupt_in_urb);
+ usb_kill_urb(port->interrupt_in_urb);
/* Try to send shutdown message, if the device is gone, this will just fail. */
transfer_buffer = kmalloc (0x12, GFP_KERNEL);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 4d1cd7a..154c7d2 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -227,6 +227,7 @@
struct list_head rx_urbs_submitted;
struct list_head rx_urb_q;
struct work_struct rx_work;
+ struct usb_serial_port *port;
struct list_head tx_urbs_free;
struct list_head tx_urbs_submitted;
};
@@ -241,7 +242,7 @@
static int start_port_read(struct usb_serial_port *port);
static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head);
static struct list_head *list_first(struct list_head *head);
-static void rx_data_softint(void *private);
+static void rx_data_softint(struct work_struct *work);
static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize);
static int firm_open(struct usb_serial_port *port);
@@ -424,7 +425,8 @@
spin_lock_init(&info->lock);
info->flags = 0;
info->mcr = 0;
- INIT_WORK(&info->rx_work, rx_data_softint, port);
+ INIT_WORK(&info->rx_work, rx_data_softint);
+ info->port = port;
INIT_LIST_HEAD(&info->rx_urbs_free);
INIT_LIST_HEAD(&info->rx_urbs_submitted);
@@ -949,7 +951,7 @@
spin_unlock_irqrestore(&info->lock, flags);
if (actually_throttled)
- rx_data_softint(port);
+ rx_data_softint(&info->rx_work);
return;
}
@@ -1400,10 +1402,11 @@
}
-static void rx_data_softint(void *private)
+static void rx_data_softint(struct work_struct *work)
{
- struct usb_serial_port *port = (struct usb_serial_port *)private;
- struct whiteheat_private *info = usb_get_serial_port_data(port);
+ struct whiteheat_private *info =
+ container_of(work, struct whiteheat_private, rx_work);
+ struct usb_serial_port *port = info->port;
struct tty_struct *tty = port->tty;
struct whiteheat_urb_wrap *wrap;
struct urb *urb;
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 3baf448..e565d3d 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -76,7 +76,7 @@
input_sync(dev);
resubmit:
- status = usb_submit_urb (urb, SLAB_ATOMIC);
+ status = usb_submit_urb (urb, GFP_ATOMIC);
if (status)
err ("can't resubmit intr, %s-%s/input0, status %d",
onetouch->udev->bus->bus_name,
@@ -142,10 +142,7 @@
return -ENODEV;
endpoint = &interface->endpoint[2].desc;
- if (!(endpoint->bEndpointAddress & USB_DIR_IN))
- return -ENODEV;
- if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- != USB_ENDPOINT_XFER_INT)
+ if (!usb_endpoint_is_int_in(endpoint))
return -ENODEV;
pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
@@ -157,7 +154,7 @@
goto fail1;
onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN,
- SLAB_ATOMIC, &onetouch->data_dma);
+ GFP_ATOMIC, &onetouch->data_dma);
if (!onetouch->data)
goto fail1;
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 47644b5..323293a 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -427,7 +427,7 @@
US_DEBUGP("%s: xfer %u bytes, %d entries\n", __FUNCTION__,
length, num_sg);
result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0,
- sg, num_sg, length, SLAB_NOIO);
+ sg, num_sg, length, GFP_NOIO);
if (result) {
US_DEBUGP("usb_sg_init returned %d\n", result);
return USB_STOR_XFER_ERROR;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index bc1ac07..db8b260 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1306,30 +1306,28 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
-/* Reported by Jan Mate <mate@fiit.stuba.sk> */
-UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
- "Sony Ericsson",
- "P990i",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
-/* Reported by Jan Mate <mate@fiit.stuba.sk> */
-UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
- "Sony Ericsson",
- "P990i",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
+ * Devices with bcd > 110 seem to not need it while those
+ * with bcd < 110 appear to need it.
*/
-UNUSUAL_DEV( 0x1019, 0x0c55, 0x0110, 0x0110,
+UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110,
"Desknote",
"UCR-61S2B",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
0 ),
+/* Reported by Jaco Kroon <jaco@kroon.co.za>
+ * The usb-storage module found on the Digitech GNX4 (and supposedly other
+ * devices) misbehaves and causes a bunch of invalid I/O errors.
+ */
+UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
+ "Digitech HMG",
+ "DigiTech Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
"Minolta",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index b8d6031..7064450 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -49,7 +49,7 @@
#include <linux/sched.h>
#include <linux/errno.h>
-#include <linux/suspend.h>
+#include <linux/freezer.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -740,18 +740,16 @@
ep = &altsetting->endpoint[i].desc;
/* Is it a BULK endpoint? */
- if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK) {
+ if (usb_endpoint_xfer_bulk(ep)) {
/* BULK in or out? */
- if (ep->bEndpointAddress & USB_DIR_IN)
+ if (usb_endpoint_dir_in(ep))
ep_in = ep;
else
ep_out = ep;
}
/* Is it an interrupt endpoint? */
- else if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_INT) {
+ else if (usb_endpoint_xfer_int(ep)) {
ep_int = ep;
}
}