|  | /* | 
|  | * AHCI SATA platform driver | 
|  | * | 
|  | * Copyright 2004-2005  Red Hat, Inc. | 
|  | *   Jeff Garzik <jgarzik@pobox.com> | 
|  | * Copyright 2010  MontaVista Software, LLC. | 
|  | *   Anton Vorontsov <avorontsov@ru.mvista.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2, or (at your option) | 
|  | * any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/gfp.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/libata.h> | 
|  | #include <linux/ahci_platform.h> | 
|  | #include "ahci.h" | 
|  |  | 
|  | static int __init ahci_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct ahci_platform_data *pdata = dev->platform_data; | 
|  | struct ata_port_info pi = { | 
|  | .flags		= AHCI_FLAG_COMMON, | 
|  | .pio_mask	= ATA_PIO4, | 
|  | .udma_mask	= ATA_UDMA6, | 
|  | .port_ops	= &ahci_ops, | 
|  | }; | 
|  | const struct ata_port_info *ppi[] = { &pi, NULL }; | 
|  | struct ahci_host_priv *hpriv; | 
|  | struct ata_host *host; | 
|  | struct resource *mem; | 
|  | int irq; | 
|  | int n_ports; | 
|  | int i; | 
|  | int rc; | 
|  |  | 
|  | mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!mem) { | 
|  | dev_err(dev, "no mmio space\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (irq <= 0) { | 
|  | dev_err(dev, "no irq\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (pdata && pdata->init) { | 
|  | rc = pdata->init(dev); | 
|  | if (rc) | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | if (pdata && pdata->ata_port_info) | 
|  | pi = *pdata->ata_port_info; | 
|  |  | 
|  | hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); | 
|  | if (!hpriv) { | 
|  | rc = -ENOMEM; | 
|  | goto err0; | 
|  | } | 
|  |  | 
|  | hpriv->flags |= (unsigned long)pi.private_data; | 
|  |  | 
|  | hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); | 
|  | if (!hpriv->mmio) { | 
|  | dev_err(dev, "can't map %pR\n", mem); | 
|  | rc = -ENOMEM; | 
|  | goto err0; | 
|  | } | 
|  |  | 
|  | ahci_save_initial_config(dev, hpriv, | 
|  | pdata ? pdata->force_port_map : 0, | 
|  | pdata ? pdata->mask_port_map  : 0); | 
|  |  | 
|  | /* prepare host */ | 
|  | if (hpriv->cap & HOST_CAP_NCQ) | 
|  | pi.flags |= ATA_FLAG_NCQ; | 
|  |  | 
|  | if (hpriv->cap & HOST_CAP_PMP) | 
|  | pi.flags |= ATA_FLAG_PMP; | 
|  |  | 
|  | ahci_set_em_messages(hpriv, &pi); | 
|  |  | 
|  | /* CAP.NP sometimes indicate the index of the last enabled | 
|  | * port, at other times, that of the last possible port, so | 
|  | * determining the maximum port number requires looking at | 
|  | * both CAP.NP and port_map. | 
|  | */ | 
|  | n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); | 
|  |  | 
|  | host = ata_host_alloc_pinfo(dev, ppi, n_ports); | 
|  | if (!host) { | 
|  | rc = -ENOMEM; | 
|  | goto err0; | 
|  | } | 
|  |  | 
|  | host->private_data = hpriv; | 
|  |  | 
|  | if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) | 
|  | host->flags |= ATA_HOST_PARALLEL_SCAN; | 
|  | else | 
|  | printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); | 
|  |  | 
|  | if (pi.flags & ATA_FLAG_EM) | 
|  | ahci_reset_em(host); | 
|  |  | 
|  | for (i = 0; i < host->n_ports; i++) { | 
|  | struct ata_port *ap = host->ports[i]; | 
|  |  | 
|  | ata_port_desc(ap, "mmio %pR", mem); | 
|  | ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); | 
|  |  | 
|  | /* set initial link pm policy */ | 
|  | ap->pm_policy = NOT_AVAILABLE; | 
|  |  | 
|  | /* set enclosure management message type */ | 
|  | if (ap->flags & ATA_FLAG_EM) | 
|  | ap->em_message_type = hpriv->em_msg_type; | 
|  |  | 
|  | /* disabled/not-implemented port */ | 
|  | if (!(hpriv->port_map & (1 << i))) | 
|  | ap->ops = &ata_dummy_port_ops; | 
|  | } | 
|  |  | 
|  | rc = ahci_reset_controller(host); | 
|  | if (rc) | 
|  | goto err0; | 
|  |  | 
|  | ahci_init_controller(host); | 
|  | ahci_print_info(host, "platform"); | 
|  |  | 
|  | rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED, | 
|  | &ahci_sht); | 
|  | if (rc) | 
|  | goto err0; | 
|  |  | 
|  | return 0; | 
|  | err0: | 
|  | if (pdata && pdata->exit) | 
|  | pdata->exit(dev); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int __devexit ahci_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct ahci_platform_data *pdata = dev->platform_data; | 
|  | struct ata_host *host = dev_get_drvdata(dev); | 
|  |  | 
|  | ata_host_detach(host); | 
|  |  | 
|  | if (pdata && pdata->exit) | 
|  | pdata->exit(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver ahci_driver = { | 
|  | .probe = ahci_probe, | 
|  | .remove = __devexit_p(ahci_remove), | 
|  | .driver = { | 
|  | .name = "ahci", | 
|  | .owner = THIS_MODULE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init ahci_init(void) | 
|  | { | 
|  | return platform_driver_probe(&ahci_driver, ahci_probe); | 
|  | } | 
|  | module_init(ahci_init); | 
|  |  | 
|  | static void __exit ahci_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&ahci_driver); | 
|  | } | 
|  | module_exit(ahci_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("AHCI SATA platform driver"); | 
|  | MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:ahci"); |