|  | /* | 
|  | *  libahci.c - Common AHCI SATA low-level routines | 
|  | * | 
|  | *  Maintained by:  Jeff Garzik <jgarzik@pobox.com> | 
|  | *    		    Please ALWAYS copy linux-ide@vger.kernel.org | 
|  | *		    on emails. | 
|  | * | 
|  | *  Copyright 2004-2005 Red Hat, Inc. | 
|  | * | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License as published by | 
|  | *  the Free Software Foundation; either version 2, or (at your option) | 
|  | *  any later version. | 
|  | * | 
|  | *  This program is distributed in the hope that it will be useful, | 
|  | *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *  GNU General Public License for more details. | 
|  | * | 
|  | *  You should have received a copy of the GNU General Public License | 
|  | *  along with this program; see the file COPYING.  If not, write to | 
|  | *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | * | 
|  | * | 
|  | * libata documentation is available via 'make {ps|pdf}docs', | 
|  | * as Documentation/DocBook/libata.* | 
|  | * | 
|  | * AHCI hardware documentation: | 
|  | * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf | 
|  | * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/gfp.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/device.h> | 
|  | #include <scsi/scsi_host.h> | 
|  | #include <scsi/scsi_cmnd.h> | 
|  | #include <linux/libata.h> | 
|  | #include "ahci.h" | 
|  |  | 
|  | static int ahci_skip_host_reset; | 
|  | int ahci_ignore_sss; | 
|  | EXPORT_SYMBOL_GPL(ahci_ignore_sss); | 
|  |  | 
|  | module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444); | 
|  | MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)"); | 
|  |  | 
|  | module_param_named(ignore_sss, ahci_ignore_sss, int, 0444); | 
|  | MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)"); | 
|  |  | 
|  | static int ahci_enable_alpm(struct ata_port *ap, | 
|  | enum link_pm policy); | 
|  | static void ahci_disable_alpm(struct ata_port *ap); | 
|  | static ssize_t ahci_led_show(struct ata_port *ap, char *buf); | 
|  | static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, | 
|  | size_t size); | 
|  | static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, | 
|  | ssize_t size); | 
|  |  | 
|  |  | 
|  |  | 
|  | static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); | 
|  | static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); | 
|  | static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); | 
|  | static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc); | 
|  | static int ahci_port_start(struct ata_port *ap); | 
|  | static void ahci_port_stop(struct ata_port *ap); | 
|  | static void ahci_qc_prep(struct ata_queued_cmd *qc); | 
|  | static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc); | 
|  | static void ahci_freeze(struct ata_port *ap); | 
|  | static void ahci_thaw(struct ata_port *ap); | 
|  | static void ahci_enable_fbs(struct ata_port *ap); | 
|  | static void ahci_disable_fbs(struct ata_port *ap); | 
|  | static void ahci_pmp_attach(struct ata_port *ap); | 
|  | static void ahci_pmp_detach(struct ata_port *ap); | 
|  | static int ahci_softreset(struct ata_link *link, unsigned int *class, | 
|  | unsigned long deadline); | 
|  | static int ahci_hardreset(struct ata_link *link, unsigned int *class, | 
|  | unsigned long deadline); | 
|  | static void ahci_postreset(struct ata_link *link, unsigned int *class); | 
|  | static void ahci_error_handler(struct ata_port *ap); | 
|  | static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); | 
|  | static int ahci_port_resume(struct ata_port *ap); | 
|  | static void ahci_dev_config(struct ata_device *dev); | 
|  | static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, | 
|  | u32 opts); | 
|  | #ifdef CONFIG_PM | 
|  | static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); | 
|  | #endif | 
|  | static ssize_t ahci_activity_show(struct ata_device *dev, char *buf); | 
|  | static ssize_t ahci_activity_store(struct ata_device *dev, | 
|  | enum sw_activity val); | 
|  | static void ahci_init_sw_activity(struct ata_link *link); | 
|  |  | 
|  | static ssize_t ahci_show_host_caps(struct device *dev, | 
|  | struct device_attribute *attr, char *buf); | 
|  | static ssize_t ahci_show_host_cap2(struct device *dev, | 
|  | struct device_attribute *attr, char *buf); | 
|  | static ssize_t ahci_show_host_version(struct device *dev, | 
|  | struct device_attribute *attr, char *buf); | 
|  | static ssize_t ahci_show_port_cmd(struct device *dev, | 
|  | struct device_attribute *attr, char *buf); | 
|  | static ssize_t ahci_read_em_buffer(struct device *dev, | 
|  | struct device_attribute *attr, char *buf); | 
|  | static ssize_t ahci_store_em_buffer(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t size); | 
|  |  | 
|  | static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL); | 
|  | static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL); | 
|  | static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL); | 
|  | static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL); | 
|  | static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO, | 
|  | ahci_read_em_buffer, ahci_store_em_buffer); | 
|  |  | 
|  | static struct device_attribute *ahci_shost_attrs[] = { | 
|  | &dev_attr_link_power_management_policy, | 
|  | &dev_attr_em_message_type, | 
|  | &dev_attr_em_message, | 
|  | &dev_attr_ahci_host_caps, | 
|  | &dev_attr_ahci_host_cap2, | 
|  | &dev_attr_ahci_host_version, | 
|  | &dev_attr_ahci_port_cmd, | 
|  | &dev_attr_em_buffer, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static struct device_attribute *ahci_sdev_attrs[] = { | 
|  | &dev_attr_sw_activity, | 
|  | &dev_attr_unload_heads, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | struct scsi_host_template ahci_sht = { | 
|  | ATA_NCQ_SHT("ahci"), | 
|  | .can_queue		= AHCI_MAX_CMDS - 1, | 
|  | .sg_tablesize		= AHCI_MAX_SG, | 
|  | .dma_boundary		= AHCI_DMA_BOUNDARY, | 
|  | .shost_attrs		= ahci_shost_attrs, | 
|  | .sdev_attrs		= ahci_sdev_attrs, | 
|  | }; | 
|  | EXPORT_SYMBOL_GPL(ahci_sht); | 
|  |  | 
|  | struct ata_port_operations ahci_ops = { | 
|  | .inherits		= &sata_pmp_port_ops, | 
|  |  | 
|  | .qc_defer		= ahci_pmp_qc_defer, | 
|  | .qc_prep		= ahci_qc_prep, | 
|  | .qc_issue		= ahci_qc_issue, | 
|  | .qc_fill_rtf		= ahci_qc_fill_rtf, | 
|  |  | 
|  | .freeze			= ahci_freeze, | 
|  | .thaw			= ahci_thaw, | 
|  | .softreset		= ahci_softreset, | 
|  | .hardreset		= ahci_hardreset, | 
|  | .postreset		= ahci_postreset, | 
|  | .pmp_softreset		= ahci_softreset, | 
|  | .error_handler		= ahci_error_handler, | 
|  | .post_internal_cmd	= ahci_post_internal_cmd, | 
|  | .dev_config		= ahci_dev_config, | 
|  |  | 
|  | .scr_read		= ahci_scr_read, | 
|  | .scr_write		= ahci_scr_write, | 
|  | .pmp_attach		= ahci_pmp_attach, | 
|  | .pmp_detach		= ahci_pmp_detach, | 
|  |  | 
|  | .enable_pm		= ahci_enable_alpm, | 
|  | .disable_pm		= ahci_disable_alpm, | 
|  | .em_show		= ahci_led_show, | 
|  | .em_store		= ahci_led_store, | 
|  | .sw_activity_show	= ahci_activity_show, | 
|  | .sw_activity_store	= ahci_activity_store, | 
|  | #ifdef CONFIG_PM | 
|  | .port_suspend		= ahci_port_suspend, | 
|  | .port_resume		= ahci_port_resume, | 
|  | #endif | 
|  | .port_start		= ahci_port_start, | 
|  | .port_stop		= ahci_port_stop, | 
|  | }; | 
|  | EXPORT_SYMBOL_GPL(ahci_ops); | 
|  |  | 
|  | int ahci_em_messages = 1; | 
|  | EXPORT_SYMBOL_GPL(ahci_em_messages); | 
|  | module_param(ahci_em_messages, int, 0444); | 
|  | /* add other LED protocol types when they become supported */ | 
|  | MODULE_PARM_DESC(ahci_em_messages, | 
|  | "AHCI Enclosure Management Message control (0 = off, 1 = on)"); | 
|  |  | 
|  | static void ahci_enable_ahci(void __iomem *mmio) | 
|  | { | 
|  | int i; | 
|  | u32 tmp; | 
|  |  | 
|  | /* turn on AHCI_EN */ | 
|  | tmp = readl(mmio + HOST_CTL); | 
|  | if (tmp & HOST_AHCI_EN) | 
|  | return; | 
|  |  | 
|  | /* Some controllers need AHCI_EN to be written multiple times. | 
|  | * Try a few times before giving up. | 
|  | */ | 
|  | for (i = 0; i < 5; i++) { | 
|  | tmp |= HOST_AHCI_EN; | 
|  | writel(tmp, mmio + HOST_CTL); | 
|  | tmp = readl(mmio + HOST_CTL);	/* flush && sanity check */ | 
|  | if (tmp & HOST_AHCI_EN) | 
|  | return; | 
|  | msleep(10); | 
|  | } | 
|  |  | 
|  | WARN_ON(1); | 
|  | } | 
|  |  | 
|  | static ssize_t ahci_show_host_caps(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ata_port *ap = ata_shost_to_port(shost); | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  |  | 
|  | return sprintf(buf, "%x\n", hpriv->cap); | 
|  | } | 
|  |  | 
|  | static ssize_t ahci_show_host_cap2(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ata_port *ap = ata_shost_to_port(shost); | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  |  | 
|  | return sprintf(buf, "%x\n", hpriv->cap2); | 
|  | } | 
|  |  | 
|  | static ssize_t ahci_show_host_version(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ata_port *ap = ata_shost_to_port(shost); | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | void __iomem *mmio = hpriv->mmio; | 
|  |  | 
|  | return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION)); | 
|  | } | 
|  |  | 
|  | static ssize_t ahci_show_port_cmd(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ata_port *ap = ata_shost_to_port(shost); | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  |  | 
|  | return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD)); | 
|  | } | 
|  |  | 
|  | static ssize_t ahci_read_em_buffer(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ata_port *ap = ata_shost_to_port(shost); | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | void __iomem *mmio = hpriv->mmio; | 
|  | void __iomem *em_mmio = mmio + hpriv->em_loc; | 
|  | u32 em_ctl, msg; | 
|  | unsigned long flags; | 
|  | size_t count; | 
|  | int i; | 
|  |  | 
|  | spin_lock_irqsave(ap->lock, flags); | 
|  |  | 
|  | em_ctl = readl(mmio + HOST_EM_CTL); | 
|  | if (!(ap->flags & ATA_FLAG_EM) || em_ctl & EM_CTL_XMT || | 
|  | !(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO)) { | 
|  | spin_unlock_irqrestore(ap->lock, flags); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!(em_ctl & EM_CTL_MR)) { | 
|  | spin_unlock_irqrestore(ap->lock, flags); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | if (!(em_ctl & EM_CTL_SMB)) | 
|  | em_mmio += hpriv->em_buf_sz; | 
|  |  | 
|  | count = hpriv->em_buf_sz; | 
|  |  | 
|  | /* the count should not be larger than PAGE_SIZE */ | 
|  | if (count > PAGE_SIZE) { | 
|  | if (printk_ratelimit()) | 
|  | ata_port_printk(ap, KERN_WARNING, | 
|  | "EM read buffer size too large: " | 
|  | "buffer size %u, page size %lu\n", | 
|  | hpriv->em_buf_sz, PAGE_SIZE); | 
|  | count = PAGE_SIZE; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < count; i += 4) { | 
|  | msg = readl(em_mmio + i); | 
|  | buf[i] = msg & 0xff; | 
|  | buf[i + 1] = (msg >> 8) & 0xff; | 
|  | buf[i + 2] = (msg >> 16) & 0xff; | 
|  | buf[i + 3] = (msg >> 24) & 0xff; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(ap->lock, flags); | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static ssize_t ahci_store_em_buffer(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t size) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ata_port *ap = ata_shost_to_port(shost); | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | void __iomem *mmio = hpriv->mmio; | 
|  | void __iomem *em_mmio = mmio + hpriv->em_loc; | 
|  | u32 em_ctl, msg; | 
|  | unsigned long flags; | 
|  | int i; | 
|  |  | 
|  | /* check size validity */ | 
|  | if (!(ap->flags & ATA_FLAG_EM) || | 
|  | !(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO) || | 
|  | size % 4 || size > hpriv->em_buf_sz) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(ap->lock, flags); | 
|  |  | 
|  | em_ctl = readl(mmio + HOST_EM_CTL); | 
|  | if (em_ctl & EM_CTL_TM) { | 
|  | spin_unlock_irqrestore(ap->lock, flags); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < size; i += 4) { | 
|  | msg = buf[i] | buf[i + 1] << 8 | | 
|  | buf[i + 2] << 16 | buf[i + 3] << 24; | 
|  | writel(msg, em_mmio + i); | 
|  | } | 
|  |  | 
|  | writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL); | 
|  |  | 
|  | spin_unlock_irqrestore(ap->lock, flags); | 
|  |  | 
|  | return size; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ahci_save_initial_config - Save and fixup initial config values | 
|  | *	@dev: target AHCI device | 
|  | *	@hpriv: host private area to store config values | 
|  | *	@force_port_map: force port map to a specified value | 
|  | *	@mask_port_map: mask out particular bits from port map | 
|  | * | 
|  | *	Some registers containing configuration info might be setup by | 
|  | *	BIOS and might be cleared on reset.  This function saves the | 
|  | *	initial values of those registers into @hpriv such that they | 
|  | *	can be restored after controller reset. | 
|  | * | 
|  | *	If inconsistent, config values are fixed up by this function. | 
|  | * | 
|  | *	LOCKING: | 
|  | *	None. | 
|  | */ | 
|  | void ahci_save_initial_config(struct device *dev, | 
|  | struct ahci_host_priv *hpriv, | 
|  | unsigned int force_port_map, | 
|  | unsigned int mask_port_map) | 
|  | { | 
|  | void __iomem *mmio = hpriv->mmio; | 
|  | u32 cap, cap2, vers, port_map; | 
|  | int i; | 
|  |  | 
|  | /* make sure AHCI mode is enabled before accessing CAP */ | 
|  | ahci_enable_ahci(mmio); | 
|  |  | 
|  | /* Values prefixed with saved_ are written back to host after | 
|  | * reset.  Values without are used for driver operation. | 
|  | */ | 
|  | hpriv->saved_cap = cap = readl(mmio + HOST_CAP); | 
|  | hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); | 
|  |  | 
|  | /* CAP2 register is only defined for AHCI 1.2 and later */ | 
|  | vers = readl(mmio + HOST_VERSION); | 
|  | if ((vers >> 16) > 1 || | 
|  | ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200)) | 
|  | hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2); | 
|  | else | 
|  | hpriv->saved_cap2 = cap2 = 0; | 
|  |  | 
|  | /* some chips have errata preventing 64bit use */ | 
|  | if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) { | 
|  | dev_printk(KERN_INFO, dev, | 
|  | "controller can't do 64bit DMA, forcing 32bit\n"); | 
|  | cap &= ~HOST_CAP_64; | 
|  | } | 
|  |  | 
|  | if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) { | 
|  | dev_printk(KERN_INFO, dev, | 
|  | "controller can't do NCQ, turning off CAP_NCQ\n"); | 
|  | cap &= ~HOST_CAP_NCQ; | 
|  | } | 
|  |  | 
|  | if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) { | 
|  | dev_printk(KERN_INFO, dev, | 
|  | "controller can do NCQ, turning on CAP_NCQ\n"); | 
|  | cap |= HOST_CAP_NCQ; | 
|  | } | 
|  |  | 
|  | if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { | 
|  | dev_printk(KERN_INFO, dev, | 
|  | "controller can't do PMP, turning off CAP_PMP\n"); | 
|  | cap &= ~HOST_CAP_PMP; | 
|  | } | 
|  |  | 
|  | if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) { | 
|  | dev_printk(KERN_INFO, dev, | 
|  | "controller can't do SNTF, turning off CAP_SNTF\n"); | 
|  | cap &= ~HOST_CAP_SNTF; | 
|  | } | 
|  |  | 
|  | if (force_port_map && port_map != force_port_map) { | 
|  | dev_printk(KERN_INFO, dev, "forcing port_map 0x%x -> 0x%x\n", | 
|  | port_map, force_port_map); | 
|  | port_map = force_port_map; | 
|  | } | 
|  |  | 
|  | if (mask_port_map) { | 
|  | dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n", | 
|  | port_map, | 
|  | port_map & mask_port_map); | 
|  | port_map &= mask_port_map; | 
|  | } | 
|  |  | 
|  | /* cross check port_map and cap.n_ports */ | 
|  | if (port_map) { | 
|  | int map_ports = 0; | 
|  |  | 
|  | for (i = 0; i < AHCI_MAX_PORTS; i++) | 
|  | if (port_map & (1 << i)) | 
|  | map_ports++; | 
|  |  | 
|  | /* If PI has more ports than n_ports, whine, clear | 
|  | * port_map and let it be generated from n_ports. | 
|  | */ | 
|  | if (map_ports > ahci_nr_ports(cap)) { | 
|  | dev_printk(KERN_WARNING, dev, | 
|  | "implemented port map (0x%x) contains more " | 
|  | "ports than nr_ports (%u), using nr_ports\n", | 
|  | port_map, ahci_nr_ports(cap)); | 
|  | port_map = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* fabricate port_map from cap.nr_ports */ | 
|  | if (!port_map) { | 
|  | port_map = (1 << ahci_nr_ports(cap)) - 1; | 
|  | dev_printk(KERN_WARNING, dev, | 
|  | "forcing PORTS_IMPL to 0x%x\n", port_map); | 
|  |  | 
|  | /* write the fixed up value to the PI register */ | 
|  | hpriv->saved_port_map = port_map; | 
|  | } | 
|  |  | 
|  | /* record values to use during operation */ | 
|  | hpriv->cap = cap; | 
|  | hpriv->cap2 = cap2; | 
|  | hpriv->port_map = port_map; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ahci_save_initial_config); | 
|  |  | 
|  | /** | 
|  | *	ahci_restore_initial_config - Restore initial config | 
|  | *	@host: target ATA host | 
|  | * | 
|  | *	Restore initial config stored by ahci_save_initial_config(). | 
|  | * | 
|  | *	LOCKING: | 
|  | *	None. | 
|  | */ | 
|  | static void ahci_restore_initial_config(struct ata_host *host) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = host->private_data; | 
|  | void __iomem *mmio = hpriv->mmio; | 
|  |  | 
|  | writel(hpriv->saved_cap, mmio + HOST_CAP); | 
|  | if (hpriv->saved_cap2) | 
|  | writel(hpriv->saved_cap2, mmio + HOST_CAP2); | 
|  | writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL); | 
|  | (void) readl(mmio + HOST_PORTS_IMPL);	/* flush */ | 
|  | } | 
|  |  | 
|  | static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg) | 
|  | { | 
|  | static const int offset[] = { | 
|  | [SCR_STATUS]		= PORT_SCR_STAT, | 
|  | [SCR_CONTROL]		= PORT_SCR_CTL, | 
|  | [SCR_ERROR]		= PORT_SCR_ERR, | 
|  | [SCR_ACTIVE]		= PORT_SCR_ACT, | 
|  | [SCR_NOTIFICATION]	= PORT_SCR_NTF, | 
|  | }; | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  |  | 
|  | if (sc_reg < ARRAY_SIZE(offset) && | 
|  | (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF))) | 
|  | return offset[sc_reg]; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(link->ap); | 
|  | int offset = ahci_scr_offset(link->ap, sc_reg); | 
|  |  | 
|  | if (offset) { | 
|  | *val = readl(port_mmio + offset); | 
|  | return 0; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(link->ap); | 
|  | int offset = ahci_scr_offset(link->ap, sc_reg); | 
|  |  | 
|  | if (offset) { | 
|  | writel(val, port_mmio + offset); | 
|  | return 0; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int ahci_is_device_present(void __iomem *port_mmio) | 
|  | { | 
|  | u8 status = readl(port_mmio + PORT_TFDATA) & 0xff; | 
|  |  | 
|  | /* Make sure PxTFD.STS.BSY and PxTFD.STS.DRQ are 0 */ | 
|  | if (status & (ATA_BUSY | ATA_DRQ)) | 
|  | return 0; | 
|  |  | 
|  | /* Make sure PxSSTS.DET is 3h */ | 
|  | status = readl(port_mmio + PORT_SCR_STAT) & 0xf; | 
|  | if (status != 3) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | void ahci_start_engine(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 tmp; | 
|  |  | 
|  | if (!ahci_is_device_present(port_mmio)) | 
|  | return; | 
|  |  | 
|  | /* start DMA */ | 
|  | tmp = readl(port_mmio + PORT_CMD); | 
|  | tmp |= PORT_CMD_START; | 
|  | writel(tmp, port_mmio + PORT_CMD); | 
|  | readl(port_mmio + PORT_CMD); /* flush */ | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ahci_start_engine); | 
|  |  | 
|  | int ahci_stop_engine(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 tmp; | 
|  |  | 
|  | tmp = readl(port_mmio + PORT_CMD); | 
|  |  | 
|  | /* check if the HBA is idle */ | 
|  | if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) | 
|  | return 0; | 
|  |  | 
|  | /* setting HBA to idle */ | 
|  | tmp &= ~PORT_CMD_START; | 
|  | writel(tmp, port_mmio + PORT_CMD); | 
|  |  | 
|  | /* wait for engine to stop. This could be as long as 500 msec */ | 
|  | tmp = ata_wait_register(port_mmio + PORT_CMD, | 
|  | PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); | 
|  | if (tmp & PORT_CMD_LIST_ON) | 
|  | return -EIO; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ahci_stop_engine); | 
|  |  | 
|  | static void ahci_start_fis_rx(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | u32 tmp; | 
|  |  | 
|  | /* set FIS registers */ | 
|  | if (hpriv->cap & HOST_CAP_64) | 
|  | writel((pp->cmd_slot_dma >> 16) >> 16, | 
|  | port_mmio + PORT_LST_ADDR_HI); | 
|  | writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); | 
|  |  | 
|  | if (hpriv->cap & HOST_CAP_64) | 
|  | writel((pp->rx_fis_dma >> 16) >> 16, | 
|  | port_mmio + PORT_FIS_ADDR_HI); | 
|  | writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); | 
|  |  | 
|  | /* enable FIS reception */ | 
|  | tmp = readl(port_mmio + PORT_CMD); | 
|  | tmp |= PORT_CMD_FIS_RX; | 
|  | writel(tmp, port_mmio + PORT_CMD); | 
|  |  | 
|  | /* flush */ | 
|  | readl(port_mmio + PORT_CMD); | 
|  | } | 
|  |  | 
|  | static int ahci_stop_fis_rx(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 tmp; | 
|  |  | 
|  | /* disable FIS reception */ | 
|  | tmp = readl(port_mmio + PORT_CMD); | 
|  | tmp &= ~PORT_CMD_FIS_RX; | 
|  | writel(tmp, port_mmio + PORT_CMD); | 
|  |  | 
|  | /* wait for completion, spec says 500ms, give it 1000 */ | 
|  | tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON, | 
|  | PORT_CMD_FIS_ON, 10, 1000); | 
|  | if (tmp & PORT_CMD_FIS_ON) | 
|  | return -EBUSY; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ahci_power_up(struct ata_port *ap) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 cmd; | 
|  |  | 
|  | cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; | 
|  |  | 
|  | /* spin up device */ | 
|  | if (hpriv->cap & HOST_CAP_SSS) { | 
|  | cmd |= PORT_CMD_SPIN_UP; | 
|  | writel(cmd, port_mmio + PORT_CMD); | 
|  | } | 
|  |  | 
|  | /* wake up link */ | 
|  | writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); | 
|  | } | 
|  |  | 
|  | static void ahci_disable_alpm(struct ata_port *ap) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 cmd; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  |  | 
|  | /* IPM bits should be disabled by libata-core */ | 
|  | /* get the existing command bits */ | 
|  | cmd = readl(port_mmio + PORT_CMD); | 
|  |  | 
|  | /* disable ALPM and ASP */ | 
|  | cmd &= ~PORT_CMD_ASP; | 
|  | cmd &= ~PORT_CMD_ALPE; | 
|  |  | 
|  | /* force the interface back to active */ | 
|  | cmd |= PORT_CMD_ICC_ACTIVE; | 
|  |  | 
|  | /* write out new cmd value */ | 
|  | writel(cmd, port_mmio + PORT_CMD); | 
|  | cmd = readl(port_mmio + PORT_CMD); | 
|  |  | 
|  | /* wait 10ms to be sure we've come out of any low power state */ | 
|  | msleep(10); | 
|  |  | 
|  | /* clear out any PhyRdy stuff from interrupt status */ | 
|  | writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT); | 
|  |  | 
|  | /* go ahead and clean out PhyRdy Change from Serror too */ | 
|  | ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); | 
|  |  | 
|  | /* | 
|  | * Clear flag to indicate that we should ignore all PhyRdy | 
|  | * state changes | 
|  | */ | 
|  | hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG; | 
|  |  | 
|  | /* | 
|  | * Enable interrupts on Phy Ready. | 
|  | */ | 
|  | pp->intr_mask |= PORT_IRQ_PHYRDY; | 
|  | writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); | 
|  |  | 
|  | /* | 
|  | * don't change the link pm policy - we can be called | 
|  | * just to turn of link pm temporarily | 
|  | */ | 
|  | } | 
|  |  | 
|  | static int ahci_enable_alpm(struct ata_port *ap, | 
|  | enum link_pm policy) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 cmd; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | u32 asp; | 
|  |  | 
|  | /* Make sure the host is capable of link power management */ | 
|  | if (!(hpriv->cap & HOST_CAP_ALPM)) | 
|  | return -EINVAL; | 
|  |  | 
|  | switch (policy) { | 
|  | case MAX_PERFORMANCE: | 
|  | case NOT_AVAILABLE: | 
|  | /* | 
|  | * if we came here with NOT_AVAILABLE, | 
|  | * it just means this is the first time we | 
|  | * have tried to enable - default to max performance, | 
|  | * and let the user go to lower power modes on request. | 
|  | */ | 
|  | ahci_disable_alpm(ap); | 
|  | return 0; | 
|  | case MIN_POWER: | 
|  | /* configure HBA to enter SLUMBER */ | 
|  | asp = PORT_CMD_ASP; | 
|  | break; | 
|  | case MEDIUM_POWER: | 
|  | /* configure HBA to enter PARTIAL */ | 
|  | asp = 0; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Disable interrupts on Phy Ready. This keeps us from | 
|  | * getting woken up due to spurious phy ready interrupts | 
|  | * TBD - Hot plug should be done via polling now, is | 
|  | * that even supported? | 
|  | */ | 
|  | pp->intr_mask &= ~PORT_IRQ_PHYRDY; | 
|  | writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); | 
|  |  | 
|  | /* | 
|  | * Set a flag to indicate that we should ignore all PhyRdy | 
|  | * state changes since these can happen now whenever we | 
|  | * change link state | 
|  | */ | 
|  | hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG; | 
|  |  | 
|  | /* get the existing command bits */ | 
|  | cmd = readl(port_mmio + PORT_CMD); | 
|  |  | 
|  | /* | 
|  | * Set ASP based on Policy | 
|  | */ | 
|  | cmd |= asp; | 
|  |  | 
|  | /* | 
|  | * Setting this bit will instruct the HBA to aggressively | 
|  | * enter a lower power link state when it's appropriate and | 
|  | * based on the value set above for ASP | 
|  | */ | 
|  | cmd |= PORT_CMD_ALPE; | 
|  |  | 
|  | /* write out new cmd value */ | 
|  | writel(cmd, port_mmio + PORT_CMD); | 
|  | cmd = readl(port_mmio + PORT_CMD); | 
|  |  | 
|  | /* IPM bits should be set by libata-core */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static void ahci_power_down(struct ata_port *ap) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 cmd, scontrol; | 
|  |  | 
|  | if (!(hpriv->cap & HOST_CAP_SSS)) | 
|  | return; | 
|  |  | 
|  | /* put device into listen mode, first set PxSCTL.DET to 0 */ | 
|  | scontrol = readl(port_mmio + PORT_SCR_CTL); | 
|  | scontrol &= ~0xf; | 
|  | writel(scontrol, port_mmio + PORT_SCR_CTL); | 
|  |  | 
|  | /* then set PxCMD.SUD to 0 */ | 
|  | cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; | 
|  | cmd &= ~PORT_CMD_SPIN_UP; | 
|  | writel(cmd, port_mmio + PORT_CMD); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void ahci_start_port(struct ata_port *ap) | 
|  | { | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | struct ata_link *link; | 
|  | struct ahci_em_priv *emp; | 
|  | ssize_t rc; | 
|  | int i; | 
|  |  | 
|  | /* enable FIS reception */ | 
|  | ahci_start_fis_rx(ap); | 
|  |  | 
|  | /* enable DMA */ | 
|  | ahci_start_engine(ap); | 
|  |  | 
|  | /* turn on LEDs */ | 
|  | if (ap->flags & ATA_FLAG_EM) { | 
|  | ata_for_each_link(link, ap, EDGE) { | 
|  | emp = &pp->em_priv[link->pmp]; | 
|  |  | 
|  | /* EM Transmit bit maybe busy during init */ | 
|  | for (i = 0; i < EM_MAX_RETRY; i++) { | 
|  | rc = ahci_transmit_led_message(ap, | 
|  | emp->led_state, | 
|  | 4); | 
|  | if (rc == -EBUSY) | 
|  | msleep(1); | 
|  | else | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ap->flags & ATA_FLAG_SW_ACTIVITY) | 
|  | ata_for_each_link(link, ap, EDGE) | 
|  | ahci_init_sw_activity(link); | 
|  |  | 
|  | } | 
|  |  | 
|  | static int ahci_deinit_port(struct ata_port *ap, const char **emsg) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | /* disable DMA */ | 
|  | rc = ahci_stop_engine(ap); | 
|  | if (rc) { | 
|  | *emsg = "failed to stop engine"; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* disable FIS reception */ | 
|  | rc = ahci_stop_fis_rx(ap); | 
|  | if (rc) { | 
|  | *emsg = "failed stop FIS RX"; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ahci_reset_controller(struct ata_host *host) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = host->private_data; | 
|  | void __iomem *mmio = hpriv->mmio; | 
|  | u32 tmp; | 
|  |  | 
|  | /* we must be in AHCI mode, before using anything | 
|  | * AHCI-specific, such as HOST_RESET. | 
|  | */ | 
|  | ahci_enable_ahci(mmio); | 
|  |  | 
|  | /* global controller reset */ | 
|  | if (!ahci_skip_host_reset) { | 
|  | tmp = readl(mmio + HOST_CTL); | 
|  | if ((tmp & HOST_RESET) == 0) { | 
|  | writel(tmp | HOST_RESET, mmio + HOST_CTL); | 
|  | readl(mmio + HOST_CTL); /* flush */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * to perform host reset, OS should set HOST_RESET | 
|  | * and poll until this bit is read to be "0". | 
|  | * reset must complete within 1 second, or | 
|  | * the hardware should be considered fried. | 
|  | */ | 
|  | tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET, | 
|  | HOST_RESET, 10, 1000); | 
|  |  | 
|  | if (tmp & HOST_RESET) { | 
|  | dev_printk(KERN_ERR, host->dev, | 
|  | "controller reset failed (0x%x)\n", tmp); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /* turn on AHCI mode */ | 
|  | ahci_enable_ahci(mmio); | 
|  |  | 
|  | /* Some registers might be cleared on reset.  Restore | 
|  | * initial values. | 
|  | */ | 
|  | ahci_restore_initial_config(host); | 
|  | } else | 
|  | dev_printk(KERN_INFO, host->dev, | 
|  | "skipping global host reset\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ahci_reset_controller); | 
|  |  | 
|  | static void ahci_sw_activity(struct ata_link *link) | 
|  | { | 
|  | struct ata_port *ap = link->ap; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; | 
|  |  | 
|  | if (!(link->flags & ATA_LFLAG_SW_ACTIVITY)) | 
|  | return; | 
|  |  | 
|  | emp->activity++; | 
|  | if (!timer_pending(&emp->timer)) | 
|  | mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10)); | 
|  | } | 
|  |  | 
|  | static void ahci_sw_activity_blink(unsigned long arg) | 
|  | { | 
|  | struct ata_link *link = (struct ata_link *)arg; | 
|  | struct ata_port *ap = link->ap; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; | 
|  | unsigned long led_message = emp->led_state; | 
|  | u32 activity_led_state; | 
|  | unsigned long flags; | 
|  |  | 
|  | led_message &= EM_MSG_LED_VALUE; | 
|  | led_message |= ap->port_no | (link->pmp << 8); | 
|  |  | 
|  | /* check to see if we've had activity.  If so, | 
|  | * toggle state of LED and reset timer.  If not, | 
|  | * turn LED to desired idle state. | 
|  | */ | 
|  | spin_lock_irqsave(ap->lock, flags); | 
|  | if (emp->saved_activity != emp->activity) { | 
|  | emp->saved_activity = emp->activity; | 
|  | /* get the current LED state */ | 
|  | activity_led_state = led_message & EM_MSG_LED_VALUE_ON; | 
|  |  | 
|  | if (activity_led_state) | 
|  | activity_led_state = 0; | 
|  | else | 
|  | activity_led_state = 1; | 
|  |  | 
|  | /* clear old state */ | 
|  | led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; | 
|  |  | 
|  | /* toggle state */ | 
|  | led_message |= (activity_led_state << 16); | 
|  | mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100)); | 
|  | } else { | 
|  | /* switch to idle */ | 
|  | led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; | 
|  | if (emp->blink_policy == BLINK_OFF) | 
|  | led_message |= (1 << 16); | 
|  | } | 
|  | spin_unlock_irqrestore(ap->lock, flags); | 
|  | ahci_transmit_led_message(ap, led_message, 4); | 
|  | } | 
|  |  | 
|  | static void ahci_init_sw_activity(struct ata_link *link) | 
|  | { | 
|  | struct ata_port *ap = link->ap; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; | 
|  |  | 
|  | /* init activity stats, setup timer */ | 
|  | emp->saved_activity = emp->activity = 0; | 
|  | setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link); | 
|  |  | 
|  | /* check our blink policy and set flag for link if it's enabled */ | 
|  | if (emp->blink_policy) | 
|  | link->flags |= ATA_LFLAG_SW_ACTIVITY; | 
|  | } | 
|  |  | 
|  | int ahci_reset_em(struct ata_host *host) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = host->private_data; | 
|  | void __iomem *mmio = hpriv->mmio; | 
|  | u32 em_ctl; | 
|  |  | 
|  | em_ctl = readl(mmio + HOST_EM_CTL); | 
|  | if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST)) | 
|  | return -EINVAL; | 
|  |  | 
|  | writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ahci_reset_em); | 
|  |  | 
|  | static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, | 
|  | ssize_t size) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | void __iomem *mmio = hpriv->mmio; | 
|  | u32 em_ctl; | 
|  | u32 message[] = {0, 0}; | 
|  | unsigned long flags; | 
|  | int pmp; | 
|  | struct ahci_em_priv *emp; | 
|  |  | 
|  | /* get the slot number from the message */ | 
|  | pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; | 
|  | if (pmp < EM_MAX_SLOTS) | 
|  | emp = &pp->em_priv[pmp]; | 
|  | else | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(ap->lock, flags); | 
|  |  | 
|  | /* | 
|  | * if we are still busy transmitting a previous message, | 
|  | * do not allow | 
|  | */ | 
|  | em_ctl = readl(mmio + HOST_EM_CTL); | 
|  | if (em_ctl & EM_CTL_TM) { | 
|  | spin_unlock_irqrestore(ap->lock, flags); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | if (hpriv->em_msg_type & EM_MSG_TYPE_LED) { | 
|  | /* | 
|  | * create message header - this is all zero except for | 
|  | * the message size, which is 4 bytes. | 
|  | */ | 
|  | message[0] |= (4 << 8); | 
|  |  | 
|  | /* ignore 0:4 of byte zero, fill in port info yourself */ | 
|  | message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no); | 
|  |  | 
|  | /* write message to EM_LOC */ | 
|  | writel(message[0], mmio + hpriv->em_loc); | 
|  | writel(message[1], mmio + hpriv->em_loc+4); | 
|  |  | 
|  | /* | 
|  | * tell hardware to transmit the message | 
|  | */ | 
|  | writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL); | 
|  | } | 
|  |  | 
|  | /* save off new led state for port/slot */ | 
|  | emp->led_state = state; | 
|  |  | 
|  | spin_unlock_irqrestore(ap->lock, flags); | 
|  | return size; | 
|  | } | 
|  |  | 
|  | static ssize_t ahci_led_show(struct ata_port *ap, char *buf) | 
|  | { | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | struct ata_link *link; | 
|  | struct ahci_em_priv *emp; | 
|  | int rc = 0; | 
|  |  | 
|  | ata_for_each_link(link, ap, EDGE) { | 
|  | emp = &pp->em_priv[link->pmp]; | 
|  | rc += sprintf(buf, "%lx\n", emp->led_state); | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, | 
|  | size_t size) | 
|  | { | 
|  | int state; | 
|  | int pmp; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | struct ahci_em_priv *emp; | 
|  |  | 
|  | state = simple_strtoul(buf, NULL, 0); | 
|  |  | 
|  | /* get the slot number from the message */ | 
|  | pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; | 
|  | if (pmp < EM_MAX_SLOTS) | 
|  | emp = &pp->em_priv[pmp]; | 
|  | else | 
|  | return -EINVAL; | 
|  |  | 
|  | /* mask off the activity bits if we are in sw_activity | 
|  | * mode, user should turn off sw_activity before setting | 
|  | * activity led through em_message | 
|  | */ | 
|  | if (emp->blink_policy) | 
|  | state &= ~EM_MSG_LED_VALUE_ACTIVITY; | 
|  |  | 
|  | return ahci_transmit_led_message(ap, state, size); | 
|  | } | 
|  |  | 
|  | static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) | 
|  | { | 
|  | struct ata_link *link = dev->link; | 
|  | struct ata_port *ap = link->ap; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; | 
|  | u32 port_led_state = emp->led_state; | 
|  |  | 
|  | /* save the desired Activity LED behavior */ | 
|  | if (val == OFF) { | 
|  | /* clear LFLAG */ | 
|  | link->flags &= ~(ATA_LFLAG_SW_ACTIVITY); | 
|  |  | 
|  | /* set the LED to OFF */ | 
|  | port_led_state &= EM_MSG_LED_VALUE_OFF; | 
|  | port_led_state |= (ap->port_no | (link->pmp << 8)); | 
|  | ahci_transmit_led_message(ap, port_led_state, 4); | 
|  | } else { | 
|  | link->flags |= ATA_LFLAG_SW_ACTIVITY; | 
|  | if (val == BLINK_OFF) { | 
|  | /* set LED to ON for idle */ | 
|  | port_led_state &= EM_MSG_LED_VALUE_OFF; | 
|  | port_led_state |= (ap->port_no | (link->pmp << 8)); | 
|  | port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */ | 
|  | ahci_transmit_led_message(ap, port_led_state, 4); | 
|  | } | 
|  | } | 
|  | emp->blink_policy = val; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ssize_t ahci_activity_show(struct ata_device *dev, char *buf) | 
|  | { | 
|  | struct ata_link *link = dev->link; | 
|  | struct ata_port *ap = link->ap; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; | 
|  |  | 
|  | /* display the saved value of activity behavior for this | 
|  | * disk. | 
|  | */ | 
|  | return sprintf(buf, "%d\n", emp->blink_policy); | 
|  | } | 
|  |  | 
|  | static void ahci_port_init(struct device *dev, struct ata_port *ap, | 
|  | int port_no, void __iomem *mmio, | 
|  | void __iomem *port_mmio) | 
|  | { | 
|  | const char *emsg = NULL; | 
|  | int rc; | 
|  | u32 tmp; | 
|  |  | 
|  | /* make sure port is not active */ | 
|  | rc = ahci_deinit_port(ap, &emsg); | 
|  | if (rc) | 
|  | dev_warn(dev, "%s (%d)\n", emsg, rc); | 
|  |  | 
|  | /* clear SError */ | 
|  | tmp = readl(port_mmio + PORT_SCR_ERR); | 
|  | VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); | 
|  | writel(tmp, port_mmio + PORT_SCR_ERR); | 
|  |  | 
|  | /* clear port IRQ */ | 
|  | tmp = readl(port_mmio + PORT_IRQ_STAT); | 
|  | VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); | 
|  | if (tmp) | 
|  | writel(tmp, port_mmio + PORT_IRQ_STAT); | 
|  |  | 
|  | writel(1 << port_no, mmio + HOST_IRQ_STAT); | 
|  | } | 
|  |  | 
|  | void ahci_init_controller(struct ata_host *host) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = host->private_data; | 
|  | void __iomem *mmio = hpriv->mmio; | 
|  | int i; | 
|  | void __iomem *port_mmio; | 
|  | u32 tmp; | 
|  |  | 
|  | for (i = 0; i < host->n_ports; i++) { | 
|  | struct ata_port *ap = host->ports[i]; | 
|  |  | 
|  | port_mmio = ahci_port_base(ap); | 
|  | if (ata_port_is_dummy(ap)) | 
|  | continue; | 
|  |  | 
|  | ahci_port_init(host->dev, ap, i, mmio, port_mmio); | 
|  | } | 
|  |  | 
|  | tmp = readl(mmio + HOST_CTL); | 
|  | VPRINTK("HOST_CTL 0x%x\n", tmp); | 
|  | writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); | 
|  | tmp = readl(mmio + HOST_CTL); | 
|  | VPRINTK("HOST_CTL 0x%x\n", tmp); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ahci_init_controller); | 
|  |  | 
|  | static void ahci_dev_config(struct ata_device *dev) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = dev->link->ap->host->private_data; | 
|  |  | 
|  | if (hpriv->flags & AHCI_HFLAG_SECT255) { | 
|  | dev->max_sectors = 255; | 
|  | ata_dev_printk(dev, KERN_INFO, | 
|  | "SB600 AHCI: limiting to 255 sectors per cmd\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static unsigned int ahci_dev_classify(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | struct ata_taskfile tf; | 
|  | u32 tmp; | 
|  |  | 
|  | tmp = readl(port_mmio + PORT_SIG); | 
|  | tf.lbah		= (tmp >> 24)	& 0xff; | 
|  | tf.lbam		= (tmp >> 16)	& 0xff; | 
|  | tf.lbal		= (tmp >> 8)	& 0xff; | 
|  | tf.nsect	= (tmp)		& 0xff; | 
|  |  | 
|  | return ata_dev_classify(&tf); | 
|  | } | 
|  |  | 
|  | static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, | 
|  | u32 opts) | 
|  | { | 
|  | dma_addr_t cmd_tbl_dma; | 
|  |  | 
|  | cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; | 
|  |  | 
|  | pp->cmd_slot[tag].opts = cpu_to_le32(opts); | 
|  | pp->cmd_slot[tag].status = 0; | 
|  | pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); | 
|  | pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); | 
|  | } | 
|  |  | 
|  | int ahci_kick_engine(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; | 
|  | u32 tmp; | 
|  | int busy, rc; | 
|  |  | 
|  | /* stop engine */ | 
|  | rc = ahci_stop_engine(ap); | 
|  | if (rc) | 
|  | goto out_restart; | 
|  |  | 
|  | /* need to do CLO? | 
|  | * always do CLO if PMP is attached (AHCI-1.3 9.2) | 
|  | */ | 
|  | busy = status & (ATA_BUSY | ATA_DRQ); | 
|  | if (!busy && !sata_pmp_attached(ap)) { | 
|  | rc = 0; | 
|  | goto out_restart; | 
|  | } | 
|  |  | 
|  | if (!(hpriv->cap & HOST_CAP_CLO)) { | 
|  | rc = -EOPNOTSUPP; | 
|  | goto out_restart; | 
|  | } | 
|  |  | 
|  | /* perform CLO */ | 
|  | tmp = readl(port_mmio + PORT_CMD); | 
|  | tmp |= PORT_CMD_CLO; | 
|  | writel(tmp, port_mmio + PORT_CMD); | 
|  |  | 
|  | rc = 0; | 
|  | tmp = ata_wait_register(port_mmio + PORT_CMD, | 
|  | PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); | 
|  | if (tmp & PORT_CMD_CLO) | 
|  | rc = -EIO; | 
|  |  | 
|  | /* restart engine */ | 
|  | out_restart: | 
|  | ahci_start_engine(ap); | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ahci_kick_engine); | 
|  |  | 
|  | static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, | 
|  | struct ata_taskfile *tf, int is_cmd, u16 flags, | 
|  | unsigned long timeout_msec) | 
|  | { | 
|  | const u32 cmd_fis_len = 5; /* five dwords */ | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u8 *fis = pp->cmd_tbl; | 
|  | u32 tmp; | 
|  |  | 
|  | /* prep the command */ | 
|  | ata_tf_to_fis(tf, pmp, is_cmd, fis); | 
|  | ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12)); | 
|  |  | 
|  | /* issue & wait */ | 
|  | writel(1, port_mmio + PORT_CMD_ISSUE); | 
|  |  | 
|  | if (timeout_msec) { | 
|  | tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, | 
|  | 1, timeout_msec); | 
|  | if (tmp & 0x1) { | 
|  | ahci_kick_engine(ap); | 
|  | return -EBUSY; | 
|  | } | 
|  | } else | 
|  | readl(port_mmio + PORT_CMD_ISSUE);	/* flush */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ahci_do_softreset(struct ata_link *link, unsigned int *class, | 
|  | int pmp, unsigned long deadline, | 
|  | int (*check_ready)(struct ata_link *link)) | 
|  | { | 
|  | struct ata_port *ap = link->ap; | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | const char *reason = NULL; | 
|  | unsigned long now, msecs; | 
|  | struct ata_taskfile tf; | 
|  | int rc; | 
|  |  | 
|  | DPRINTK("ENTER\n"); | 
|  |  | 
|  | /* prepare for SRST (AHCI-1.1 10.4.1) */ | 
|  | rc = ahci_kick_engine(ap); | 
|  | if (rc && rc != -EOPNOTSUPP) | 
|  | ata_link_printk(link, KERN_WARNING, | 
|  | "failed to reset engine (errno=%d)\n", rc); | 
|  |  | 
|  | ata_tf_init(link->device, &tf); | 
|  |  | 
|  | /* issue the first D2H Register FIS */ | 
|  | msecs = 0; | 
|  | now = jiffies; | 
|  | if (time_after(now, deadline)) | 
|  | msecs = jiffies_to_msecs(deadline - now); | 
|  |  | 
|  | tf.ctl |= ATA_SRST; | 
|  | if (ahci_exec_polled_cmd(ap, pmp, &tf, 0, | 
|  | AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) { | 
|  | rc = -EIO; | 
|  | reason = "1st FIS failed"; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | /* spec says at least 5us, but be generous and sleep for 1ms */ | 
|  | msleep(1); | 
|  |  | 
|  | /* issue the second D2H Register FIS */ | 
|  | tf.ctl &= ~ATA_SRST; | 
|  | ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); | 
|  |  | 
|  | /* wait for link to become ready */ | 
|  | rc = ata_wait_after_reset(link, deadline, check_ready); | 
|  | if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) { | 
|  | /* | 
|  | * Workaround for cases where link online status can't | 
|  | * be trusted.  Treat device readiness timeout as link | 
|  | * offline. | 
|  | */ | 
|  | ata_link_printk(link, KERN_INFO, | 
|  | "device not ready, treating as offline\n"); | 
|  | *class = ATA_DEV_NONE; | 
|  | } else if (rc) { | 
|  | /* link occupied, -ENODEV too is an error */ | 
|  | reason = "device not ready"; | 
|  | goto fail; | 
|  | } else | 
|  | *class = ahci_dev_classify(ap); | 
|  |  | 
|  | DPRINTK("EXIT, class=%u\n", *class); | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | int ahci_check_ready(struct ata_link *link) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(link->ap); | 
|  | u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; | 
|  |  | 
|  | return ata_check_ready(status); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ahci_check_ready); | 
|  |  | 
|  | static int ahci_softreset(struct ata_link *link, unsigned int *class, | 
|  | unsigned long deadline) | 
|  | { | 
|  | int pmp = sata_srst_pmp(link); | 
|  |  | 
|  | DPRINTK("ENTER\n"); | 
|  |  | 
|  | return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ahci_do_softreset); | 
|  |  | 
|  | static int ahci_hardreset(struct ata_link *link, unsigned int *class, | 
|  | unsigned long deadline) | 
|  | { | 
|  | const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); | 
|  | struct ata_port *ap = link->ap; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; | 
|  | struct ata_taskfile tf; | 
|  | bool online; | 
|  | int rc; | 
|  |  | 
|  | DPRINTK("ENTER\n"); | 
|  |  | 
|  | ahci_stop_engine(ap); | 
|  |  | 
|  | /* clear D2H reception area to properly wait for D2H FIS */ | 
|  | ata_tf_init(link->device, &tf); | 
|  | tf.command = 0x80; | 
|  | ata_tf_to_fis(&tf, 0, 0, d2h_fis); | 
|  |  | 
|  | rc = sata_link_hardreset(link, timing, deadline, &online, | 
|  | ahci_check_ready); | 
|  |  | 
|  | ahci_start_engine(ap); | 
|  |  | 
|  | if (online) | 
|  | *class = ahci_dev_classify(ap); | 
|  |  | 
|  | DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void ahci_postreset(struct ata_link *link, unsigned int *class) | 
|  | { | 
|  | struct ata_port *ap = link->ap; | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 new_tmp, tmp; | 
|  |  | 
|  | ata_std_postreset(link, class); | 
|  |  | 
|  | /* Make sure port's ATAPI bit is set appropriately */ | 
|  | new_tmp = tmp = readl(port_mmio + PORT_CMD); | 
|  | if (*class == ATA_DEV_ATAPI) | 
|  | new_tmp |= PORT_CMD_ATAPI; | 
|  | else | 
|  | new_tmp &= ~PORT_CMD_ATAPI; | 
|  | if (new_tmp != tmp) { | 
|  | writel(new_tmp, port_mmio + PORT_CMD); | 
|  | readl(port_mmio + PORT_CMD); /* flush */ | 
|  | } | 
|  | } | 
|  |  | 
|  | static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) | 
|  | { | 
|  | struct scatterlist *sg; | 
|  | struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; | 
|  | unsigned int si; | 
|  |  | 
|  | VPRINTK("ENTER\n"); | 
|  |  | 
|  | /* | 
|  | * Next, the S/G list. | 
|  | */ | 
|  | for_each_sg(qc->sg, sg, qc->n_elem, si) { | 
|  | dma_addr_t addr = sg_dma_address(sg); | 
|  | u32 sg_len = sg_dma_len(sg); | 
|  |  | 
|  | ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff); | 
|  | ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16); | 
|  | ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1); | 
|  | } | 
|  |  | 
|  | return si; | 
|  | } | 
|  |  | 
|  | static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc) | 
|  | { | 
|  | struct ata_port *ap = qc->ap; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  |  | 
|  | if (!sata_pmp_attached(ap) || pp->fbs_enabled) | 
|  | return ata_std_qc_defer(qc); | 
|  | else | 
|  | return sata_pmp_qc_defer_cmd_switch(qc); | 
|  | } | 
|  |  | 
|  | static void ahci_qc_prep(struct ata_queued_cmd *qc) | 
|  | { | 
|  | struct ata_port *ap = qc->ap; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | int is_atapi = ata_is_atapi(qc->tf.protocol); | 
|  | void *cmd_tbl; | 
|  | u32 opts; | 
|  | const u32 cmd_fis_len = 5; /* five dwords */ | 
|  | unsigned int n_elem; | 
|  |  | 
|  | /* | 
|  | * Fill in command table information.  First, the header, | 
|  | * a SATA Register - Host to Device command FIS. | 
|  | */ | 
|  | cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; | 
|  |  | 
|  | ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl); | 
|  | if (is_atapi) { | 
|  | memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); | 
|  | memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); | 
|  | } | 
|  |  | 
|  | n_elem = 0; | 
|  | if (qc->flags & ATA_QCFLAG_DMAMAP) | 
|  | n_elem = ahci_fill_sg(qc, cmd_tbl); | 
|  |  | 
|  | /* | 
|  | * Fill in command slot information. | 
|  | */ | 
|  | opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12); | 
|  | if (qc->tf.flags & ATA_TFLAG_WRITE) | 
|  | opts |= AHCI_CMD_WRITE; | 
|  | if (is_atapi) | 
|  | opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; | 
|  |  | 
|  | ahci_fill_cmd_slot(pp, qc->tag, opts); | 
|  | } | 
|  |  | 
|  | static void ahci_fbs_dec_intr(struct ata_port *ap) | 
|  | { | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 fbs = readl(port_mmio + PORT_FBS); | 
|  | int retries = 3; | 
|  |  | 
|  | DPRINTK("ENTER\n"); | 
|  | BUG_ON(!pp->fbs_enabled); | 
|  |  | 
|  | /* time to wait for DEC is not specified by AHCI spec, | 
|  | * add a retry loop for safety. | 
|  | */ | 
|  | writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS); | 
|  | fbs = readl(port_mmio + PORT_FBS); | 
|  | while ((fbs & PORT_FBS_DEC) && retries--) { | 
|  | udelay(1); | 
|  | fbs = readl(port_mmio + PORT_FBS); | 
|  | } | 
|  |  | 
|  | if (fbs & PORT_FBS_DEC) | 
|  | dev_printk(KERN_ERR, ap->host->dev, | 
|  | "failed to clear device error\n"); | 
|  | } | 
|  |  | 
|  | static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | struct ata_eh_info *host_ehi = &ap->link.eh_info; | 
|  | struct ata_link *link = NULL; | 
|  | struct ata_queued_cmd *active_qc; | 
|  | struct ata_eh_info *active_ehi; | 
|  | bool fbs_need_dec = false; | 
|  | u32 serror; | 
|  |  | 
|  | /* determine active link with error */ | 
|  | if (pp->fbs_enabled) { | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 fbs = readl(port_mmio + PORT_FBS); | 
|  | int pmp = fbs >> PORT_FBS_DWE_OFFSET; | 
|  |  | 
|  | if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) && | 
|  | ata_link_online(&ap->pmp_link[pmp])) { | 
|  | link = &ap->pmp_link[pmp]; | 
|  | fbs_need_dec = true; | 
|  | } | 
|  |  | 
|  | } else | 
|  | ata_for_each_link(link, ap, EDGE) | 
|  | if (ata_link_active(link)) | 
|  | break; | 
|  |  | 
|  | if (!link) | 
|  | link = &ap->link; | 
|  |  | 
|  | active_qc = ata_qc_from_tag(ap, link->active_tag); | 
|  | active_ehi = &link->eh_info; | 
|  |  | 
|  | /* record irq stat */ | 
|  | ata_ehi_clear_desc(host_ehi); | 
|  | ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat); | 
|  |  | 
|  | /* AHCI needs SError cleared; otherwise, it might lock up */ | 
|  | ahci_scr_read(&ap->link, SCR_ERROR, &serror); | 
|  | ahci_scr_write(&ap->link, SCR_ERROR, serror); | 
|  | host_ehi->serror |= serror; | 
|  |  | 
|  | /* some controllers set IRQ_IF_ERR on device errors, ignore it */ | 
|  | if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR) | 
|  | irq_stat &= ~PORT_IRQ_IF_ERR; | 
|  |  | 
|  | if (irq_stat & PORT_IRQ_TF_ERR) { | 
|  | /* If qc is active, charge it; otherwise, the active | 
|  | * link.  There's no active qc on NCQ errors.  It will | 
|  | * be determined by EH by reading log page 10h. | 
|  | */ | 
|  | if (active_qc) | 
|  | active_qc->err_mask |= AC_ERR_DEV; | 
|  | else | 
|  | active_ehi->err_mask |= AC_ERR_DEV; | 
|  |  | 
|  | if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL) | 
|  | host_ehi->serror &= ~SERR_INTERNAL; | 
|  | } | 
|  |  | 
|  | if (irq_stat & PORT_IRQ_UNK_FIS) { | 
|  | u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); | 
|  |  | 
|  | active_ehi->err_mask |= AC_ERR_HSM; | 
|  | active_ehi->action |= ATA_EH_RESET; | 
|  | ata_ehi_push_desc(active_ehi, | 
|  | "unknown FIS %08x %08x %08x %08x" , | 
|  | unk[0], unk[1], unk[2], unk[3]); | 
|  | } | 
|  |  | 
|  | if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) { | 
|  | active_ehi->err_mask |= AC_ERR_HSM; | 
|  | active_ehi->action |= ATA_EH_RESET; | 
|  | ata_ehi_push_desc(active_ehi, "incorrect PMP"); | 
|  | } | 
|  |  | 
|  | if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { | 
|  | host_ehi->err_mask |= AC_ERR_HOST_BUS; | 
|  | host_ehi->action |= ATA_EH_RESET; | 
|  | ata_ehi_push_desc(host_ehi, "host bus error"); | 
|  | } | 
|  |  | 
|  | if (irq_stat & PORT_IRQ_IF_ERR) { | 
|  | if (fbs_need_dec) | 
|  | active_ehi->err_mask |= AC_ERR_DEV; | 
|  | else { | 
|  | host_ehi->err_mask |= AC_ERR_ATA_BUS; | 
|  | host_ehi->action |= ATA_EH_RESET; | 
|  | } | 
|  |  | 
|  | ata_ehi_push_desc(host_ehi, "interface fatal error"); | 
|  | } | 
|  |  | 
|  | if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { | 
|  | ata_ehi_hotplugged(host_ehi); | 
|  | ata_ehi_push_desc(host_ehi, "%s", | 
|  | irq_stat & PORT_IRQ_CONNECT ? | 
|  | "connection status changed" : "PHY RDY changed"); | 
|  | } | 
|  |  | 
|  | /* okay, let's hand over to EH */ | 
|  |  | 
|  | if (irq_stat & PORT_IRQ_FREEZE) | 
|  | ata_port_freeze(ap); | 
|  | else if (fbs_need_dec) { | 
|  | ata_link_abort(link); | 
|  | ahci_fbs_dec_intr(ap); | 
|  | } else | 
|  | ata_port_abort(ap); | 
|  | } | 
|  |  | 
|  | static void ahci_port_intr(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | struct ata_eh_info *ehi = &ap->link.eh_info; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING); | 
|  | u32 status, qc_active = 0; | 
|  | int rc; | 
|  |  | 
|  | status = readl(port_mmio + PORT_IRQ_STAT); | 
|  | writel(status, port_mmio + PORT_IRQ_STAT); | 
|  |  | 
|  | /* ignore BAD_PMP while resetting */ | 
|  | if (unlikely(resetting)) | 
|  | status &= ~PORT_IRQ_BAD_PMP; | 
|  |  | 
|  | /* If we are getting PhyRdy, this is | 
|  | * just a power state change, we should | 
|  | * clear out this, plus the PhyRdy/Comm | 
|  | * Wake bits from Serror | 
|  | */ | 
|  | if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) && | 
|  | (status & PORT_IRQ_PHYRDY)) { | 
|  | status &= ~PORT_IRQ_PHYRDY; | 
|  | ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); | 
|  | } | 
|  |  | 
|  | if (unlikely(status & PORT_IRQ_ERROR)) { | 
|  | ahci_error_intr(ap, status); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (status & PORT_IRQ_SDB_FIS) { | 
|  | /* If SNotification is available, leave notification | 
|  | * handling to sata_async_notification().  If not, | 
|  | * emulate it by snooping SDB FIS RX area. | 
|  | * | 
|  | * Snooping FIS RX area is probably cheaper than | 
|  | * poking SNotification but some constrollers which | 
|  | * implement SNotification, ICH9 for example, don't | 
|  | * store AN SDB FIS into receive area. | 
|  | */ | 
|  | if (hpriv->cap & HOST_CAP_SNTF) | 
|  | sata_async_notification(ap); | 
|  | else { | 
|  | /* If the 'N' bit in word 0 of the FIS is set, | 
|  | * we just received asynchronous notification. | 
|  | * Tell libata about it. | 
|  | * | 
|  | * Lack of SNotification should not appear in | 
|  | * ahci 1.2, so the workaround is unnecessary | 
|  | * when FBS is enabled. | 
|  | */ | 
|  | if (pp->fbs_enabled) | 
|  | WARN_ON_ONCE(1); | 
|  | else { | 
|  | const __le32 *f = pp->rx_fis + RX_FIS_SDB; | 
|  | u32 f0 = le32_to_cpu(f[0]); | 
|  | if (f0 & (1 << 15)) | 
|  | sata_async_notification(ap); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* pp->active_link is not reliable once FBS is enabled, both | 
|  | * PORT_SCR_ACT and PORT_CMD_ISSUE should be checked because | 
|  | * NCQ and non-NCQ commands may be in flight at the same time. | 
|  | */ | 
|  | if (pp->fbs_enabled) { | 
|  | if (ap->qc_active) { | 
|  | qc_active = readl(port_mmio + PORT_SCR_ACT); | 
|  | qc_active |= readl(port_mmio + PORT_CMD_ISSUE); | 
|  | } | 
|  | } else { | 
|  | /* pp->active_link is valid iff any command is in flight */ | 
|  | if (ap->qc_active && pp->active_link->sactive) | 
|  | qc_active = readl(port_mmio + PORT_SCR_ACT); | 
|  | else | 
|  | qc_active = readl(port_mmio + PORT_CMD_ISSUE); | 
|  | } | 
|  |  | 
|  |  | 
|  | rc = ata_qc_complete_multiple(ap, qc_active); | 
|  |  | 
|  | /* while resetting, invalid completions are expected */ | 
|  | if (unlikely(rc < 0 && !resetting)) { | 
|  | ehi->err_mask |= AC_ERR_HSM; | 
|  | ehi->action |= ATA_EH_RESET; | 
|  | ata_port_freeze(ap); | 
|  | } | 
|  | } | 
|  |  | 
|  | irqreturn_t ahci_interrupt(int irq, void *dev_instance) | 
|  | { | 
|  | struct ata_host *host = dev_instance; | 
|  | struct ahci_host_priv *hpriv; | 
|  | unsigned int i, handled = 0; | 
|  | void __iomem *mmio; | 
|  | u32 irq_stat, irq_masked; | 
|  |  | 
|  | VPRINTK("ENTER\n"); | 
|  |  | 
|  | hpriv = host->private_data; | 
|  | mmio = hpriv->mmio; | 
|  |  | 
|  | /* sigh.  0xffffffff is a valid return from h/w */ | 
|  | irq_stat = readl(mmio + HOST_IRQ_STAT); | 
|  | if (!irq_stat) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | irq_masked = irq_stat & hpriv->port_map; | 
|  |  | 
|  | spin_lock(&host->lock); | 
|  |  | 
|  | for (i = 0; i < host->n_ports; i++) { | 
|  | struct ata_port *ap; | 
|  |  | 
|  | if (!(irq_masked & (1 << i))) | 
|  | continue; | 
|  |  | 
|  | ap = host->ports[i]; | 
|  | if (ap) { | 
|  | ahci_port_intr(ap); | 
|  | VPRINTK("port %u\n", i); | 
|  | } else { | 
|  | VPRINTK("port %u (no irq)\n", i); | 
|  | if (ata_ratelimit()) | 
|  | dev_printk(KERN_WARNING, host->dev, | 
|  | "interrupt on disabled port %u\n", i); | 
|  | } | 
|  |  | 
|  | handled = 1; | 
|  | } | 
|  |  | 
|  | /* HOST_IRQ_STAT behaves as level triggered latch meaning that | 
|  | * it should be cleared after all the port events are cleared; | 
|  | * otherwise, it will raise a spurious interrupt after each | 
|  | * valid one.  Please read section 10.6.2 of ahci 1.1 for more | 
|  | * information. | 
|  | * | 
|  | * Also, use the unmasked value to clear interrupt as spurious | 
|  | * pending event on a dummy port might cause screaming IRQ. | 
|  | */ | 
|  | writel(irq_stat, mmio + HOST_IRQ_STAT); | 
|  |  | 
|  | spin_unlock(&host->lock); | 
|  |  | 
|  | VPRINTK("EXIT\n"); | 
|  |  | 
|  | return IRQ_RETVAL(handled); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ahci_interrupt); | 
|  |  | 
|  | static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) | 
|  | { | 
|  | struct ata_port *ap = qc->ap; | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  |  | 
|  | /* Keep track of the currently active link.  It will be used | 
|  | * in completion path to determine whether NCQ phase is in | 
|  | * progress. | 
|  | */ | 
|  | pp->active_link = qc->dev->link; | 
|  |  | 
|  | if (qc->tf.protocol == ATA_PROT_NCQ) | 
|  | writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); | 
|  |  | 
|  | if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) { | 
|  | u32 fbs = readl(port_mmio + PORT_FBS); | 
|  | fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC); | 
|  | fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; | 
|  | writel(fbs, port_mmio + PORT_FBS); | 
|  | pp->fbs_last_dev = qc->dev->link->pmp; | 
|  | } | 
|  |  | 
|  | writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); | 
|  |  | 
|  | ahci_sw_activity(qc->dev->link); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc) | 
|  | { | 
|  | struct ahci_port_priv *pp = qc->ap->private_data; | 
|  | u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; | 
|  |  | 
|  | if (pp->fbs_enabled) | 
|  | d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ; | 
|  |  | 
|  | ata_tf_from_fis(d2h_fis, &qc->result_tf); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void ahci_freeze(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  |  | 
|  | /* turn IRQ off */ | 
|  | writel(0, port_mmio + PORT_IRQ_MASK); | 
|  | } | 
|  |  | 
|  | static void ahci_thaw(struct ata_port *ap) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | void __iomem *mmio = hpriv->mmio; | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 tmp; | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  |  | 
|  | /* clear IRQ */ | 
|  | tmp = readl(port_mmio + PORT_IRQ_STAT); | 
|  | writel(tmp, port_mmio + PORT_IRQ_STAT); | 
|  | writel(1 << ap->port_no, mmio + HOST_IRQ_STAT); | 
|  |  | 
|  | /* turn IRQ back on */ | 
|  | writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); | 
|  | } | 
|  |  | 
|  | static void ahci_error_handler(struct ata_port *ap) | 
|  | { | 
|  | if (!(ap->pflags & ATA_PFLAG_FROZEN)) { | 
|  | /* restart engine */ | 
|  | ahci_stop_engine(ap); | 
|  | ahci_start_engine(ap); | 
|  | } | 
|  |  | 
|  | sata_pmp_error_handler(ap); | 
|  | } | 
|  |  | 
|  | static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) | 
|  | { | 
|  | struct ata_port *ap = qc->ap; | 
|  |  | 
|  | /* make DMA engine forget about the failed command */ | 
|  | if (qc->flags & ATA_QCFLAG_FAILED) | 
|  | ahci_kick_engine(ap); | 
|  | } | 
|  |  | 
|  | static void ahci_enable_fbs(struct ata_port *ap) | 
|  | { | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 fbs; | 
|  | int rc; | 
|  |  | 
|  | if (!pp->fbs_supported) | 
|  | return; | 
|  |  | 
|  | fbs = readl(port_mmio + PORT_FBS); | 
|  | if (fbs & PORT_FBS_EN) { | 
|  | pp->fbs_enabled = true; | 
|  | pp->fbs_last_dev = -1; /* initialization */ | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = ahci_stop_engine(ap); | 
|  | if (rc) | 
|  | return; | 
|  |  | 
|  | writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); | 
|  | fbs = readl(port_mmio + PORT_FBS); | 
|  | if (fbs & PORT_FBS_EN) { | 
|  | dev_printk(KERN_INFO, ap->host->dev, "FBS is enabled.\n"); | 
|  | pp->fbs_enabled = true; | 
|  | pp->fbs_last_dev = -1; /* initialization */ | 
|  | } else | 
|  | dev_printk(KERN_ERR, ap->host->dev, "Failed to enable FBS\n"); | 
|  |  | 
|  | ahci_start_engine(ap); | 
|  | } | 
|  |  | 
|  | static void ahci_disable_fbs(struct ata_port *ap) | 
|  | { | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 fbs; | 
|  | int rc; | 
|  |  | 
|  | if (!pp->fbs_supported) | 
|  | return; | 
|  |  | 
|  | fbs = readl(port_mmio + PORT_FBS); | 
|  | if ((fbs & PORT_FBS_EN) == 0) { | 
|  | pp->fbs_enabled = false; | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = ahci_stop_engine(ap); | 
|  | if (rc) | 
|  | return; | 
|  |  | 
|  | writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS); | 
|  | fbs = readl(port_mmio + PORT_FBS); | 
|  | if (fbs & PORT_FBS_EN) | 
|  | dev_printk(KERN_ERR, ap->host->dev, "Failed to disable FBS\n"); | 
|  | else { | 
|  | dev_printk(KERN_INFO, ap->host->dev, "FBS is disabled.\n"); | 
|  | pp->fbs_enabled = false; | 
|  | } | 
|  |  | 
|  | ahci_start_engine(ap); | 
|  | } | 
|  |  | 
|  | static void ahci_pmp_attach(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | u32 cmd; | 
|  |  | 
|  | cmd = readl(port_mmio + PORT_CMD); | 
|  | cmd |= PORT_CMD_PMP; | 
|  | writel(cmd, port_mmio + PORT_CMD); | 
|  |  | 
|  | ahci_enable_fbs(ap); | 
|  |  | 
|  | pp->intr_mask |= PORT_IRQ_BAD_PMP; | 
|  | writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); | 
|  | } | 
|  |  | 
|  | static void ahci_pmp_detach(struct ata_port *ap) | 
|  | { | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | struct ahci_port_priv *pp = ap->private_data; | 
|  | u32 cmd; | 
|  |  | 
|  | ahci_disable_fbs(ap); | 
|  |  | 
|  | cmd = readl(port_mmio + PORT_CMD); | 
|  | cmd &= ~PORT_CMD_PMP; | 
|  | writel(cmd, port_mmio + PORT_CMD); | 
|  |  | 
|  | pp->intr_mask &= ~PORT_IRQ_BAD_PMP; | 
|  | writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); | 
|  | } | 
|  |  | 
|  | static int ahci_port_resume(struct ata_port *ap) | 
|  | { | 
|  | ahci_power_up(ap); | 
|  | ahci_start_port(ap); | 
|  |  | 
|  | if (sata_pmp_attached(ap)) | 
|  | ahci_pmp_attach(ap); | 
|  | else | 
|  | ahci_pmp_detach(ap); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) | 
|  | { | 
|  | const char *emsg = NULL; | 
|  | int rc; | 
|  |  | 
|  | rc = ahci_deinit_port(ap, &emsg); | 
|  | if (rc == 0) | 
|  | ahci_power_down(ap); | 
|  | else { | 
|  | ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc); | 
|  | ahci_start_port(ap); | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int ahci_port_start(struct ata_port *ap) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = ap->host->private_data; | 
|  | struct device *dev = ap->host->dev; | 
|  | struct ahci_port_priv *pp; | 
|  | void *mem; | 
|  | dma_addr_t mem_dma; | 
|  | size_t dma_sz, rx_fis_sz; | 
|  |  | 
|  | pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); | 
|  | if (!pp) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* check FBS capability */ | 
|  | if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) { | 
|  | void __iomem *port_mmio = ahci_port_base(ap); | 
|  | u32 cmd = readl(port_mmio + PORT_CMD); | 
|  | if (cmd & PORT_CMD_FBSCP) | 
|  | pp->fbs_supported = true; | 
|  | else | 
|  | dev_printk(KERN_WARNING, dev, | 
|  | "The port is not capable of FBS\n"); | 
|  | } | 
|  |  | 
|  | if (pp->fbs_supported) { | 
|  | dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ; | 
|  | rx_fis_sz = AHCI_RX_FIS_SZ * 16; | 
|  | } else { | 
|  | dma_sz = AHCI_PORT_PRIV_DMA_SZ; | 
|  | rx_fis_sz = AHCI_RX_FIS_SZ; | 
|  | } | 
|  |  | 
|  | mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL); | 
|  | if (!mem) | 
|  | return -ENOMEM; | 
|  | memset(mem, 0, dma_sz); | 
|  |  | 
|  | /* | 
|  | * First item in chunk of DMA memory: 32-slot command table, | 
|  | * 32 bytes each in size | 
|  | */ | 
|  | pp->cmd_slot = mem; | 
|  | pp->cmd_slot_dma = mem_dma; | 
|  |  | 
|  | mem += AHCI_CMD_SLOT_SZ; | 
|  | mem_dma += AHCI_CMD_SLOT_SZ; | 
|  |  | 
|  | /* | 
|  | * Second item: Received-FIS area | 
|  | */ | 
|  | pp->rx_fis = mem; | 
|  | pp->rx_fis_dma = mem_dma; | 
|  |  | 
|  | mem += rx_fis_sz; | 
|  | mem_dma += rx_fis_sz; | 
|  |  | 
|  | /* | 
|  | * Third item: data area for storing a single command | 
|  | * and its scatter-gather table | 
|  | */ | 
|  | pp->cmd_tbl = mem; | 
|  | pp->cmd_tbl_dma = mem_dma; | 
|  |  | 
|  | /* | 
|  | * Save off initial list of interrupts to be enabled. | 
|  | * This could be changed later | 
|  | */ | 
|  | pp->intr_mask = DEF_PORT_IRQ; | 
|  |  | 
|  | ap->private_data = pp; | 
|  |  | 
|  | /* engage engines, captain */ | 
|  | return ahci_port_resume(ap); | 
|  | } | 
|  |  | 
|  | static void ahci_port_stop(struct ata_port *ap) | 
|  | { | 
|  | const char *emsg = NULL; | 
|  | int rc; | 
|  |  | 
|  | /* de-initialize port */ | 
|  | rc = ahci_deinit_port(ap, &emsg); | 
|  | if (rc) | 
|  | ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc); | 
|  | } | 
|  |  | 
|  | void ahci_print_info(struct ata_host *host, const char *scc_s) | 
|  | { | 
|  | struct ahci_host_priv *hpriv = host->private_data; | 
|  | void __iomem *mmio = hpriv->mmio; | 
|  | u32 vers, cap, cap2, impl, speed; | 
|  | const char *speed_s; | 
|  |  | 
|  | vers = readl(mmio + HOST_VERSION); | 
|  | cap = hpriv->cap; | 
|  | cap2 = hpriv->cap2; | 
|  | impl = hpriv->port_map; | 
|  |  | 
|  | speed = (cap >> 20) & 0xf; | 
|  | if (speed == 1) | 
|  | speed_s = "1.5"; | 
|  | else if (speed == 2) | 
|  | speed_s = "3"; | 
|  | else if (speed == 3) | 
|  | speed_s = "6"; | 
|  | else | 
|  | speed_s = "?"; | 
|  |  | 
|  | dev_info(host->dev, | 
|  | "AHCI %02x%02x.%02x%02x " | 
|  | "%u slots %u ports %s Gbps 0x%x impl %s mode\n" | 
|  | , | 
|  |  | 
|  | (vers >> 24) & 0xff, | 
|  | (vers >> 16) & 0xff, | 
|  | (vers >> 8) & 0xff, | 
|  | vers & 0xff, | 
|  |  | 
|  | ((cap >> 8) & 0x1f) + 1, | 
|  | (cap & 0x1f) + 1, | 
|  | speed_s, | 
|  | impl, | 
|  | scc_s); | 
|  |  | 
|  | dev_info(host->dev, | 
|  | "flags: " | 
|  | "%s%s%s%s%s%s%s" | 
|  | "%s%s%s%s%s%s%s" | 
|  | "%s%s%s%s%s%s\n" | 
|  | , | 
|  |  | 
|  | cap & HOST_CAP_64 ? "64bit " : "", | 
|  | cap & HOST_CAP_NCQ ? "ncq " : "", | 
|  | cap & HOST_CAP_SNTF ? "sntf " : "", | 
|  | cap & HOST_CAP_MPS ? "ilck " : "", | 
|  | cap & HOST_CAP_SSS ? "stag " : "", | 
|  | cap & HOST_CAP_ALPM ? "pm " : "", | 
|  | cap & HOST_CAP_LED ? "led " : "", | 
|  | cap & HOST_CAP_CLO ? "clo " : "", | 
|  | cap & HOST_CAP_ONLY ? "only " : "", | 
|  | cap & HOST_CAP_PMP ? "pmp " : "", | 
|  | cap & HOST_CAP_FBS ? "fbs " : "", | 
|  | cap & HOST_CAP_PIO_MULTI ? "pio " : "", | 
|  | cap & HOST_CAP_SSC ? "slum " : "", | 
|  | cap & HOST_CAP_PART ? "part " : "", | 
|  | cap & HOST_CAP_CCC ? "ccc " : "", | 
|  | cap & HOST_CAP_EMS ? "ems " : "", | 
|  | cap & HOST_CAP_SXS ? "sxs " : "", | 
|  | cap2 & HOST_CAP2_APST ? "apst " : "", | 
|  | cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "", | 
|  | cap2 & HOST_CAP2_BOH ? "boh " : "" | 
|  | ); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ahci_print_info); | 
|  |  | 
|  | void ahci_set_em_messages(struct ahci_host_priv *hpriv, | 
|  | struct ata_port_info *pi) | 
|  | { | 
|  | u8 messages; | 
|  | void __iomem *mmio = hpriv->mmio; | 
|  | u32 em_loc = readl(mmio + HOST_EM_LOC); | 
|  | u32 em_ctl = readl(mmio + HOST_EM_CTL); | 
|  |  | 
|  | if (!ahci_em_messages || !(hpriv->cap & HOST_CAP_EMS)) | 
|  | return; | 
|  |  | 
|  | messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16; | 
|  |  | 
|  | if (messages) { | 
|  | /* store em_loc */ | 
|  | hpriv->em_loc = ((em_loc >> 16) * 4); | 
|  | hpriv->em_buf_sz = ((em_loc & 0xff) * 4); | 
|  | hpriv->em_msg_type = messages; | 
|  | pi->flags |= ATA_FLAG_EM; | 
|  | if (!(em_ctl & EM_CTL_ALHD)) | 
|  | pi->flags |= ATA_FLAG_SW_ACTIVITY; | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ahci_set_em_messages); | 
|  |  | 
|  | MODULE_AUTHOR("Jeff Garzik"); | 
|  | MODULE_DESCRIPTION("Common AHCI SATA low-level routines"); | 
|  | MODULE_LICENSE("GPL"); |