| /* |
| * driver/dma/ste_dma40_ll.h |
| * |
| * Copyright (C) ST-Ericsson 2007-2010 |
| * License terms: GNU General Public License (GPL) version 2 |
| * Author: Per Friden <per.friden@stericsson.com> |
| * Author: Jonas Aaberg <jonas.aberg@stericsson.com> |
| */ |
| #ifndef STE_DMA40_LL_H |
| #define STE_DMA40_LL_H |
| |
| #define D40_DREG_PCBASE 0x400 |
| #define D40_DREG_PCDELTA (8 * 4) |
| #define D40_LLI_ALIGN 16 /* LLI alignment must be 16 bytes. */ |
| |
| #define D40_TYPE_TO_GROUP(type) (type / 16) |
| #define D40_TYPE_TO_EVENT(type) (type % 16) |
| |
| /* Most bits of the CFG register are the same in log as in phy mode */ |
| #define D40_SREG_CFG_MST_POS 15 |
| #define D40_SREG_CFG_TIM_POS 14 |
| #define D40_SREG_CFG_EIM_POS 13 |
| #define D40_SREG_CFG_LOG_INCR_POS 12 |
| #define D40_SREG_CFG_PHY_PEN_POS 12 |
| #define D40_SREG_CFG_PSIZE_POS 10 |
| #define D40_SREG_CFG_ESIZE_POS 8 |
| #define D40_SREG_CFG_PRI_POS 7 |
| #define D40_SREG_CFG_LBE_POS 6 |
| #define D40_SREG_CFG_LOG_GIM_POS 5 |
| #define D40_SREG_CFG_LOG_MFU_POS 4 |
| #define D40_SREG_CFG_PHY_TM_POS 4 |
| #define D40_SREG_CFG_PHY_EVTL_POS 0 |
| |
| |
| /* Standard channel parameters - basic mode (element register) */ |
| #define D40_SREG_ELEM_PHY_ECNT_POS 16 |
| #define D40_SREG_ELEM_PHY_EIDX_POS 0 |
| |
| #define D40_SREG_ELEM_PHY_ECNT_MASK (0xFFFF << D40_SREG_ELEM_PHY_ECNT_POS) |
| |
| /* Standard channel parameters - basic mode (Link register) */ |
| #define D40_SREG_LNK_PHY_TCP_POS 0 |
| #define D40_SREG_LNK_PHY_LMP_POS 1 |
| #define D40_SREG_LNK_PHY_PRE_POS 2 |
| /* |
| * Source destination link address. Contains the |
| * 29-bit byte word aligned address of the reload area. |
| */ |
| #define D40_SREG_LNK_PHYS_LNK_MASK 0xFFFFFFF8UL |
| |
| /* Standard basic channel logical mode */ |
| |
| /* Element register */ |
| #define D40_SREG_ELEM_LOG_ECNT_POS 16 |
| #define D40_SREG_ELEM_LOG_LIDX_POS 8 |
| #define D40_SREG_ELEM_LOG_LOS_POS 1 |
| #define D40_SREG_ELEM_LOG_TCP_POS 0 |
| |
| #define D40_SREG_ELEM_LOG_LIDX_MASK (0xFF << D40_SREG_ELEM_LOG_LIDX_POS) |
| |
| /* Link register */ |
| #define D40_DEACTIVATE_EVENTLINE 0x0 |
| #define D40_ACTIVATE_EVENTLINE 0x1 |
| #define D40_EVENTLINE_POS(i) (2 * i) |
| #define D40_EVENTLINE_MASK(i) (0x3 << D40_EVENTLINE_POS(i)) |
| |
| /* Standard basic channel logical params in memory */ |
| |
| /* LCSP0 */ |
| #define D40_MEM_LCSP0_ECNT_POS 16 |
| #define D40_MEM_LCSP0_SPTR_POS 0 |
| |
| #define D40_MEM_LCSP0_ECNT_MASK (0xFFFF << D40_MEM_LCSP0_ECNT_POS) |
| #define D40_MEM_LCSP0_SPTR_MASK (0xFFFF << D40_MEM_LCSP0_SPTR_POS) |
| |
| /* LCSP1 */ |
| #define D40_MEM_LCSP1_SPTR_POS 16 |
| #define D40_MEM_LCSP1_SCFG_MST_POS 15 |
| #define D40_MEM_LCSP1_SCFG_TIM_POS 14 |
| #define D40_MEM_LCSP1_SCFG_EIM_POS 13 |
| #define D40_MEM_LCSP1_SCFG_INCR_POS 12 |
| #define D40_MEM_LCSP1_SCFG_PSIZE_POS 10 |
| #define D40_MEM_LCSP1_SCFG_ESIZE_POS 8 |
| #define D40_MEM_LCSP1_SLOS_POS 1 |
| #define D40_MEM_LCSP1_STCP_POS 0 |
| |
| #define D40_MEM_LCSP1_SPTR_MASK (0xFFFF << D40_MEM_LCSP1_SPTR_POS) |
| #define D40_MEM_LCSP1_SCFG_TIM_MASK (0x1 << D40_MEM_LCSP1_SCFG_TIM_POS) |
| #define D40_MEM_LCSP1_SCFG_INCR_MASK (0x1 << D40_MEM_LCSP1_SCFG_INCR_POS) |
| #define D40_MEM_LCSP1_SCFG_PSIZE_MASK (0x3 << D40_MEM_LCSP1_SCFG_PSIZE_POS) |
| #define D40_MEM_LCSP1_SLOS_MASK (0x7F << D40_MEM_LCSP1_SLOS_POS) |
| #define D40_MEM_LCSP1_STCP_MASK (0x1 << D40_MEM_LCSP1_STCP_POS) |
| |
| /* LCSP2 */ |
| #define D40_MEM_LCSP2_ECNT_POS 16 |
| |
| #define D40_MEM_LCSP2_ECNT_MASK (0xFFFF << D40_MEM_LCSP2_ECNT_POS) |
| |
| /* LCSP3 */ |
| #define D40_MEM_LCSP3_DCFG_MST_POS 15 |
| #define D40_MEM_LCSP3_DCFG_TIM_POS 14 |
| #define D40_MEM_LCSP3_DCFG_EIM_POS 13 |
| #define D40_MEM_LCSP3_DCFG_INCR_POS 12 |
| #define D40_MEM_LCSP3_DCFG_PSIZE_POS 10 |
| #define D40_MEM_LCSP3_DCFG_ESIZE_POS 8 |
| #define D40_MEM_LCSP3_DLOS_POS 1 |
| #define D40_MEM_LCSP3_DTCP_POS 0 |
| |
| #define D40_MEM_LCSP3_DLOS_MASK (0x7F << D40_MEM_LCSP3_DLOS_POS) |
| #define D40_MEM_LCSP3_DTCP_MASK (0x1 << D40_MEM_LCSP3_DTCP_POS) |
| |
| |
| /* Standard channel parameter register offsets */ |
| #define D40_CHAN_REG_SSCFG 0x00 |
| #define D40_CHAN_REG_SSELT 0x04 |
| #define D40_CHAN_REG_SSPTR 0x08 |
| #define D40_CHAN_REG_SSLNK 0x0C |
| #define D40_CHAN_REG_SDCFG 0x10 |
| #define D40_CHAN_REG_SDELT 0x14 |
| #define D40_CHAN_REG_SDPTR 0x18 |
| #define D40_CHAN_REG_SDLNK 0x1C |
| |
| /* DMA Register Offsets */ |
| #define D40_DREG_GCC 0x000 |
| #define D40_DREG_PRTYP 0x004 |
| #define D40_DREG_PRSME 0x008 |
| #define D40_DREG_PRSMO 0x00C |
| #define D40_DREG_PRMSE 0x010 |
| #define D40_DREG_PRMSO 0x014 |
| #define D40_DREG_PRMOE 0x018 |
| #define D40_DREG_PRMOO 0x01C |
| #define D40_DREG_LCPA 0x020 |
| #define D40_DREG_LCLA 0x024 |
| #define D40_DREG_ACTIVE 0x050 |
| #define D40_DREG_ACTIVO 0x054 |
| #define D40_DREG_FSEB1 0x058 |
| #define D40_DREG_FSEB2 0x05C |
| #define D40_DREG_PCMIS 0x060 |
| #define D40_DREG_PCICR 0x064 |
| #define D40_DREG_PCTIS 0x068 |
| #define D40_DREG_PCEIS 0x06C |
| #define D40_DREG_LCMIS0 0x080 |
| #define D40_DREG_LCMIS1 0x084 |
| #define D40_DREG_LCMIS2 0x088 |
| #define D40_DREG_LCMIS3 0x08C |
| #define D40_DREG_LCICR0 0x090 |
| #define D40_DREG_LCICR1 0x094 |
| #define D40_DREG_LCICR2 0x098 |
| #define D40_DREG_LCICR3 0x09C |
| #define D40_DREG_LCTIS0 0x0A0 |
| #define D40_DREG_LCTIS1 0x0A4 |
| #define D40_DREG_LCTIS2 0x0A8 |
| #define D40_DREG_LCTIS3 0x0AC |
| #define D40_DREG_LCEIS0 0x0B0 |
| #define D40_DREG_LCEIS1 0x0B4 |
| #define D40_DREG_LCEIS2 0x0B8 |
| #define D40_DREG_LCEIS3 0x0BC |
| #define D40_DREG_STFU 0xFC8 |
| #define D40_DREG_ICFG 0xFCC |
| #define D40_DREG_PERIPHID0 0xFE0 |
| #define D40_DREG_PERIPHID1 0xFE4 |
| #define D40_DREG_PERIPHID2 0xFE8 |
| #define D40_DREG_PERIPHID3 0xFEC |
| #define D40_DREG_CELLID0 0xFF0 |
| #define D40_DREG_CELLID1 0xFF4 |
| #define D40_DREG_CELLID2 0xFF8 |
| #define D40_DREG_CELLID3 0xFFC |
| |
| /* LLI related structures */ |
| |
| /** |
| * struct d40_phy_lli - The basic configration register for each physical |
| * channel. |
| * |
| * @reg_cfg: The configuration register. |
| * @reg_elt: The element register. |
| * @reg_ptr: The pointer register. |
| * @reg_lnk: The link register. |
| * |
| * These registers are set up for both physical and logical transfers |
| * Note that the bit in each register means differently in logical and |
| * physical(standard) mode. |
| * |
| * This struct must be 16 bytes aligned, and only contain physical registers |
| * since it will be directly accessed by the DMA. |
| */ |
| struct d40_phy_lli { |
| u32 reg_cfg; |
| u32 reg_elt; |
| u32 reg_ptr; |
| u32 reg_lnk; |
| }; |
| |
| /** |
| * struct d40_phy_lli_bidir - struct for a transfer. |
| * |
| * @src: Register settings for src channel. |
| * @dst: Register settings for dst channel. |
| * @dst_addr: Physical destination address. |
| * @src_addr: Physical source address. |
| * |
| * All DMA transfers have a source and a destination. |
| */ |
| |
| struct d40_phy_lli_bidir { |
| struct d40_phy_lli *src; |
| struct d40_phy_lli *dst; |
| dma_addr_t dst_addr; |
| dma_addr_t src_addr; |
| }; |
| |
| |
| /** |
| * struct d40_log_lli - logical lli configuration |
| * |
| * @lcsp02: Either maps to register lcsp0 if src or lcsp2 if dst. |
| * @lcsp13: Either maps to register lcsp1 if src or lcsp3 if dst. |
| * |
| * This struct must be 8 bytes aligned since it will be accessed directy by |
| * the DMA. Never add any none hw mapped registers to this struct. |
| */ |
| |
| struct d40_log_lli { |
| u32 lcsp02; |
| u32 lcsp13; |
| }; |
| |
| /** |
| * struct d40_log_lli_bidir - For both src and dst |
| * |
| * @src: pointer to src lli configuration. |
| * @dst: pointer to dst lli configuration. |
| * |
| * You always have a src and a dst when doing DMA transfers. |
| */ |
| |
| struct d40_log_lli_bidir { |
| struct d40_log_lli *src; |
| struct d40_log_lli *dst; |
| }; |
| |
| /** |
| * struct d40_log_lli_full - LCPA layout |
| * |
| * @lcsp0: Logical Channel Standard Param 0 - Src. |
| * @lcsp1: Logical Channel Standard Param 1 - Src. |
| * @lcsp2: Logical Channel Standard Param 2 - Dst. |
| * @lcsp3: Logical Channel Standard Param 3 - Dst. |
| * |
| * This struct maps to LCPA physical memory layout. Must map to |
| * the hw. |
| */ |
| struct d40_log_lli_full { |
| u32 lcsp0; |
| u32 lcsp1; |
| u32 lcsp2; |
| u32 lcsp3; |
| }; |
| |
| /** |
| * struct d40_def_lcsp - Default LCSP1 and LCSP3 settings |
| * |
| * @lcsp3: The default configuration for dst. |
| * @lcsp1: The default configuration for src. |
| */ |
| struct d40_def_lcsp { |
| u32 lcsp3; |
| u32 lcsp1; |
| }; |
| |
| /** |
| * struct d40_lcla_elem - Info for one LCA element. |
| * |
| * @src_id: logical channel src id |
| * @dst_id: logical channel dst id |
| * @src: LCPA formated src parameters |
| * @dst: LCPA formated dst parameters |
| * |
| */ |
| struct d40_lcla_elem { |
| int src_id; |
| int dst_id; |
| struct d40_log_lli *src; |
| struct d40_log_lli *dst; |
| }; |
| |
| /* Physical channels */ |
| |
| void d40_phy_cfg(struct stedma40_chan_cfg *cfg, |
| u32 *src_cfg, u32 *dst_cfg, bool is_log); |
| |
| void d40_log_cfg(struct stedma40_chan_cfg *cfg, |
| u32 *lcsp1, u32 *lcsp2); |
| |
| int d40_phy_sg_to_lli(struct scatterlist *sg, |
| int sg_len, |
| dma_addr_t target, |
| struct d40_phy_lli *lli, |
| dma_addr_t lli_phys, |
| u32 reg_cfg, |
| u32 data_width, |
| int psize, |
| bool term_int); |
| |
| int d40_phy_fill_lli(struct d40_phy_lli *lli, |
| dma_addr_t data, |
| u32 data_size, |
| int psize, |
| dma_addr_t next_lli, |
| u32 reg_cfg, |
| bool term_int, |
| u32 data_width, |
| bool is_device); |
| |
| void d40_phy_lli_write(void __iomem *virtbase, |
| u32 phy_chan_num, |
| struct d40_phy_lli *lli_dst, |
| struct d40_phy_lli *lli_src); |
| |
| /* Logical channels */ |
| |
| void d40_log_fill_lli(struct d40_log_lli *lli, |
| dma_addr_t data, u32 data_size, |
| u32 lli_next_off, u32 reg_cfg, |
| u32 data_width, |
| bool term_int, bool addr_inc); |
| |
| int d40_log_sg_to_dev(struct d40_lcla_elem *lcla, |
| struct scatterlist *sg, |
| int sg_len, |
| struct d40_log_lli_bidir *lli, |
| struct d40_def_lcsp *lcsp, |
| u32 src_data_width, |
| u32 dst_data_width, |
| enum dma_data_direction direction, |
| bool term_int, dma_addr_t dev_addr, int max_len, |
| int llis_per_log); |
| |
| void d40_log_lli_write(struct d40_log_lli_full *lcpa, |
| struct d40_log_lli *lcla_src, |
| struct d40_log_lli *lcla_dst, |
| struct d40_log_lli *lli_dst, |
| struct d40_log_lli *lli_src, |
| int llis_per_log); |
| |
| int d40_log_sg_to_lli(int lcla_id, |
| struct scatterlist *sg, |
| int sg_len, |
| struct d40_log_lli *lli_sg, |
| u32 lcsp13, /* src or dst*/ |
| u32 data_width, |
| bool term_int, int max_len, int llis_per_log); |
| |
| #endif /* STE_DMA40_LLI_H */ |